Upgrade libedit to 20190324
Bug: 76097225
Exempt-From-Owner-Approval: No real owner.
Test: build
Change-Id: I2beeb1488e8be6413502d6e7b4d647f260167555
diff --git a/.gitignore b/.gitignore
new file mode 100644
index 0000000..ea050e9
--- /dev/null
+++ b/.gitignore
@@ -0,0 +1 @@
+._*
diff --git a/Android.mk b/Android.mk
deleted file mode 100644
index 5792aa5..0000000
--- a/Android.mk
+++ /dev/null
@@ -1,39 +0,0 @@
-ifeq ($(ANDROID_BUILD_LIBEDIT),true) # only maintainer needs this
-ifeq ($(HOST_OS),linux) # only build on linux hosts
-ifeq ($(HOST_ARCH),x86) # only build on x86 hosts
-
-LOCAL_PATH := $(call my-dir)
-PREBUILT_ROOT := prebuilts/libs/libedit
-PREBUILT_ARCH_ROOT := $(PREBUILT_ROOT)/$(HOST_OS)-$(HOST_ARCH)
-
-PREBUILT_CFLAGS="CFLAGS=-m32"
-PREBUILT_CXXFLAGS="CXXFLAGS=-m32"
-PREBUILT_LDFLAGS="LDFLAGS=-m32"
-
-HOST_STATIC_LIB_EXT := .a
-
-# Light wrapper rules around ./configure-based build.
-# Output goes to the prebuilts/libs/libedit directory.
-
-$(LOCAL_PATH)/lib/libedit.la: $(wildcard $(LOCAL_PATH)/src/*) $(LOCAL_PATH)/config.h
- @echo making libedit for $(HOST_OS)-$(HOST_ARCH)
- make -C $(LOCAL_PATH)
-
-$(PREBUILT_ARCH_ROOT)/lib/libedit.la: $(LOCAL_PATH)/lib/libedit.la
- make -C $(LOCAL_PATH) all install
-
-$(LOCAL_PATH)/config.h: $(LOCAL_PATH)/config.h.in
- $(hide) cd $(LOCAL_PATH) \
- && ./configure \
- --prefix=$(abspath $(PREBUILT_ROOT)) \
- --exec-prefix=$(abspath $(PREBUILT_ARCH_ROOT)) \
- --disable-shared \
- $(PREBUILT_CFLAGS) $(PREBUILT_CXXFLAGS) $(PREBUILT_LDFLAGS) \
- && make clean
-
-$(PREBUILT_ARCH_ROOT)/lib/libedit$(HOST_STATIC_LIB_EXT): \
- $(PREBUILT_ARCH_ROOT)/lib/libedit.la
-
-endif # only build on x86 hosts
-endif # only build on linux hosts
-endif # only maintainer needs this
diff --git a/ChangeLog b/ChangeLog
index 1496718..26fc4d5 100644
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,6 +1,98 @@
* See also NetBSD changelog:
http://cvsweb.netbsd.org/bsdweb.cgi/src/lib/libedit
+2019-03-24 Jess Thrysoee
+
+ * version-info: 0:60:0
+
+ * all: sync with upstream source
+
+2018-12-09 Jess Thrysoee
+
+ * version-info: 0:59:0
+
+ * all: sync with upstream source
+
+2018-05-25 Jess Thrysoee
+
+ * version-info: 0:58:0
+
+ * all: sync with upstream source
+
+2017-05-22 Jess Thrysoee
+
+ * version-info: 0:57:0
+
+ * all: sync with upstream source
+
+ * libedit.pc.in: Ncurses should not be a part of public link interface.
+ Patch by Yegor Timoshenko
+
+2017-03-29 Jess Thrysoee
+
+ * version-info: 0:56:0
+
+ * all: sync with upstream source
+
+2016-09-03 Jess Thrysoee
+
+ * version-info: 0:55:0
+
+ * all: sync with upstream source
+
+2016-06-18 Jess Thrysoee
+
+ * version-info: 0:54:0
+
+ * all: sync with upstream source
+
+ * deprecate option --enable-widec.
+ Upstream now always build with unicode (wide-char/UTF-8) support.
+
+2015-03-25 Jess Thrysoee
+
+ * version-info: 0:53:0
+
+ * all: sync with upstream source
+
+2014-10-30 Jess Thrysoee
+
+ * version-info: 0:52:0
+
+ * all: sync with upstream source
+
+ * configura.ac: Fix posix shell portability issue. Patch by Ryo Onodera.
+
+2014-06-20 Jess Thrysoee
+
+ * version-info: 0:51:0
+
+ * all: sync with upstream source
+
+2014-06-18 Jess Thrysoee
+
+ * version-info: 0:50:0
+
+ * all: sync with upstream source - add weak alias patches
+
+2014-06-18 Jess Thrysoee
+
+ * version-info: 0:49:0
+
+ * all: sync with upstream source.
+
+2014-02-13 Jess Thrysoee
+
+ * version-info: 0:48:0
+
+ * all: sync with upstream source.
+
+ * examples/fileman.c: Fix typo. Patch by Kamil Dudka.
+
+ * Makefile.am, configure.ac: Add --enable-examples configure parameter.
+ Make it possible to enable/disable building of the examples programs.
+ Patch by James Le Cuirot.
+
2013-07-12 Jess Thrysoee
* version-info: 0:47:0
@@ -95,7 +187,7 @@
2009-09-23 Jess Thrysoee
* version-info: 0:34:0
- * all: apply Apple patches from:
+ * all: apply Apple patches from:
http://opensource.apple.com/source/libedit/libedit-11/patches
2009-09-05 Jess Thrysoee
@@ -150,7 +242,7 @@
information.
* examples/fileman.c: cast stat struct members, st_nlink and st_size,
- appropriately (see also 'man 2 stat'). Patch by Alex Elder.
+ appropriately (see also 'man 2 stat'). Patch by Alex Elder.
* all: sync with upstream source. MINOR version is now 11.
@@ -228,7 +320,7 @@
* patches/cvs_export.sh: strlcat.c and strlcpy.c was moved to
src/common/lib/libc/string in the upstream cvs repository.
- * all: sync with upstream source.
+ * all: sync with upstream source.
2005-10-22 Jess Thrysoee
@@ -237,7 +329,7 @@
* patches/*.patch, configure.ac: define SCCSID, undef LIBC_SCCS. Remove
fourteen cosmetic patches.
- * all: sync with upstream source.
+ * all: sync with upstream source.
2005-09-11 Jess Thrysoee
@@ -262,19 +354,19 @@
* acinclude.m4: added EL_GETPW_R_DRAFT test and use AC_TRY_LINK instead
of AC_TRY_COMPILE. Suggested by Norihiko Murase.
- * all: sync with upstream source.
+ * all: sync with upstream source.
2005-08-16 Jess Thrysoee
* version-info: 0:13:0
- * all: sync with upstream source.
+ * all: sync with upstream source.
2005-08-05 Jess Thrysoee
* version-info: 0:12:0
- * all: sync with upstream source.
+ * all: sync with upstream source.
2005-07-24 Jess Thrysoee
@@ -305,7 +397,7 @@
* version-info: 0:8:0
- * all: sync with upstream source.
+ * all: sync with upstream source.
2005-06-01 Jess Thrysoee
@@ -349,7 +441,7 @@
* all: sync with upstream source.
- * doc/Makefile.am: If mdoc2man fails, remove empty file. Patch by
+ * doc/Makefile.am: If mdoc2man fails, remove empty file. Patch by
Darren Tucker.
2004-10-14 Jess Thrysoee
diff --git a/LICENSE b/LICENSE
new file mode 120000
index 0000000..d24842f
--- /dev/null
+++ b/LICENSE
@@ -0,0 +1 @@
+COPYING
\ No newline at end of file
diff --git a/METADATA b/METADATA
new file mode 100644
index 0000000..1e7fab5
--- /dev/null
+++ b/METADATA
@@ -0,0 +1,18 @@
+name: "libedit"
+description: "Provides generic line editing, history, and tokenization functions, similar to those found in GNU Readline."
+third_party {
+ url {
+ type: HOMEPAGE
+ value: "https://www.thrysoee.dk/editline/"
+ }
+ url {
+ type: ARCHIVE
+ value: "https://www.thrysoee.dk/editline/libedit-20190324-3.1.tar.gz"
+ }
+ version: "20190324-3.1"
+ last_upgrade_date {
+ year: 2019
+ month: 8
+ day: 28
+ }
+}
diff --git a/Makefile.am b/Makefile.am
index 6bc998f..0939907 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -2,7 +2,11 @@
AUTOMAKE_OPTIONS = foreign
ACLOCAL_AMFLAGS = -I m4
-SUBDIRS = src examples doc
+if ENABLE_EXAMPLES
+ EXAMPLES_DIR=examples
+endif
+
+SUBDIRS = src $(EXAMPLES_DIR) doc
EXTRA_DIST = libedit.pc.in
pkgconfigdir = $(libdir)/pkgconfig
diff --git a/Makefile.in b/Makefile.in
index 43e8bf5..f66abff 100644
--- a/Makefile.in
+++ b/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.14 from Makefile.am.
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -15,7 +15,17 @@
@SET_MAKE@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
@@ -79,11 +89,6 @@
build_triplet = @build@
host_triplet = @host@
subdir = .
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/configure $(am__configure_deps) \
- $(srcdir)/config.h.in $(srcdir)/libedit.pc.in COPYING \
- ChangeLog INSTALL THANKS compile config.guess config.sub \
- depcomp install-sh missing ltmain.sh
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -91,6 +96,8 @@
$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+ $(am__configure_deps) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
@@ -160,7 +167,7 @@
$(RECURSIVE_CLEAN_TARGETS) \
$(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
- cscope distdir dist dist-all distcheck
+ cscope distdir distdir-am dist dist-all distcheck
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
$(LISP)config.h.in
# Read a list of newline-separated strings from the standard input,
@@ -182,7 +189,10 @@
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
-DIST_SUBDIRS = $(SUBDIRS)
+DIST_SUBDIRS = src examples doc
+am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/config.h.in \
+ $(srcdir)/libedit.pc.in COPYING ChangeLog INSTALL THANKS \
+ compile config.guess config.sub install-sh ltmain.sh missing
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
@@ -264,6 +274,7 @@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
LT_VERSION = @LT_VERSION@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -344,7 +355,8 @@
top_srcdir = @top_srcdir@
AUTOMAKE_OPTIONS = foreign
ACLOCAL_AMFLAGS = -I m4
-SUBDIRS = src examples doc
+@ENABLE_EXAMPLES_TRUE@EXAMPLES_DIR = examples
+SUBDIRS = src $(EXAMPLES_DIR) doc
EXTRA_DIST = libedit.pc.in
pkgconfigdir = $(libdir)/pkgconfig
pkgconfig_DATA = libedit.pc
@@ -367,15 +379,14 @@
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
-.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -540,7 +551,10 @@
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
-distdir: $(DISTFILES)
+distdir: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
$(am__remove_distdir)
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
@@ -605,7 +619,7 @@
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
$(am__post_remove_distdir)
dist-bzip2: distdir
@@ -621,17 +635,17 @@
$(am__post_remove_distdir)
dist-tarZ: distdir
- @echo WARNING: "Support for shar distribution archives is" \
- "deprecated." >&2
+ @echo WARNING: "Support for distribution archives compressed with" \
+ "legacy program 'compress' is deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__post_remove_distdir)
dist-shar: distdir
- @echo WARNING: "Support for distribution archives compressed with" \
- "legacy program 'compress' is deprecated." >&2
+ @echo WARNING: "Support for shar distribution archives is" \
+ "deprecated." >&2
@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
- shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+ shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
$(am__post_remove_distdir)
dist-zip: distdir
@@ -649,7 +663,7 @@
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
- GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lz*) \
@@ -659,22 +673,23 @@
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
- GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+ eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir)
chmod u+w $(distdir)
- mkdir $(distdir)/_build $(distdir)/_inst
+ mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
- && $(am__cd) $(distdir)/_build \
- && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ && $(am__cd) $(distdir)/_build/sub \
+ && ../../configure \
$(AM_DISTCHECK_CONFIGURE_FLAGS) \
$(DISTCHECK_CONFIGURE_FLAGS) \
+ --srcdir=../.. --prefix="$$dc_install_base" \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
@@ -854,6 +869,8 @@
mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
uninstall-am uninstall-pkgconfigDATA
+.PRECIOUS: Makefile
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
diff --git a/NOTICE b/NOTICE
deleted file mode 100644
index 742f005..0000000
--- a/NOTICE
+++ /dev/null
@@ -1,30 +0,0 @@
-Copyright (c) 1992, 1993
- The Regents of the University of California. All rights reserved.
-
-This code is derived from software contributed to Berkeley by
-Christos Zoulas of Cornell University.
-
-Redistribution and use in source and binary forms, with or without
-modification, are permitted provided that the following conditions
-are met:
-1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
-2. Redistributions in binary form must reproduce the above copyright
- notice, this list of conditions and the following disclaimer in the
- documentation and/or other materials provided with the distribution.
-3. Neither the name of the University nor the names of its contributors
- may be used to endorse or promote products derived from this software
- without specific prior written permission.
-
-THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGE.
-
diff --git a/NOTICE b/NOTICE
new file mode 120000
index 0000000..7a694c9
--- /dev/null
+++ b/NOTICE
@@ -0,0 +1 @@
+LICENSE
\ No newline at end of file
diff --git a/OWNERS b/OWNERS
deleted file mode 100644
index 21a2ebd..0000000
--- a/OWNERS
+++ /dev/null
@@ -1,6 +0,0 @@
-# Default owners are top 3 active developers of the past 1 or 2 years
-# or people with more than 10 commits last year.
-# Please update this list if you find better owner candidates.
-tfiala@google.com
-cco3@android.com
-djm@google.com
diff --git a/README.android b/README.android
deleted file mode 100644
index 323bb3a..0000000
--- a/README.android
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * README.android describes in high-level the libedit changes that we
- * cannot push upstream to the llvm.org repository:
- * - Changes due to Android's build system.
- * - Changes due to Android's toolchain.
- */
-
-* Initial downstream on 2013/10/30: Synched to libedit-20130712-3.1.tar.gz
- from http://thrysoee.dk/editline/.
-
-* We add Android's *.mk files that are specific to Android's build system.
- Currently for linux x86 (32-bit) host only.
diff --git a/README.version b/README.version
deleted file mode 100644
index f60cec0..0000000
--- a/README.version
+++ /dev/null
@@ -1,3 +0,0 @@
-URL: http://thrysoee.dk/editline/libedit-20130712-3.1.tar.gz
-Version: 20130712-3.1
-BugComponent: 14890
diff --git a/acinclude.m4 b/acinclude.m4
index 4a58189..da6b832 100644
--- a/acinclude.m4
+++ b/acinclude.m4
@@ -14,7 +14,7 @@
dnl
dnl NetBSD use the -mdoc macro package for manpages, but e.g.
-dnl AIX and Solaris only support the -man package.
+dnl AIX and Solaris only support the -man package.
dnl
AC_DEFUN([EL_MANTYPE],
[
@@ -44,7 +44,7 @@
#include <pwd.h>],
[getpwnam_r(NULL, NULL, NULL, (size_t)0, NULL);
getpwuid_r((uid_t)0, NULL, NULL, (size_t)0, NULL);],
- [AC_DEFINE([HAVE_GETPW_R_POSIX], 1, [Define to 1 if you have getpwnam_r and getpwuid_r that are POSIX.1 compatible.])
+ [AC_DEFINE([HAVE_GETPW_R_POSIX], 1, [Define to 1 if you have getpwnam_r and getpwuid_r that are POSIX.1 compatible.])
AC_MSG_RESULT(yes)],
[AC_MSG_RESULT(no)])
])
@@ -60,26 +60,23 @@
#include <pwd.h>],
[getpwnam_r(NULL, NULL, NULL, (size_t)0);
getpwuid_r((uid_t)0, NULL, NULL, (size_t)0);],
- [AC_DEFINE([HAVE_GETPW_R_DRAFT], 1, [Define to 1 if you have getpwnam_r and getpwuid_r that are draft POSIX.1 versions.])
+ [AC_DEFINE([HAVE_GETPW_R_DRAFT], 1, [Define to 1 if you have getpwnam_r and getpwuid_r that are draft POSIX.1 versions.])
AC_MSG_RESULT(yes)],
[AC_MSG_RESULT(no)])
])
dnl
-dnl use option --enable-widec to turn on use of wide-character support
+dnl deprecate option --enable-widec to turn on use of wide-character support
dnl
-AC_DEFUN([EL_ENABLE_WIDEC],
+AC_DEFUN([EL_DEPRECATE_WIDEC],
[
AC_MSG_CHECKING(if you want wide-character code)
AC_ARG_ENABLE(widec,
- [ --enable-widec compile with wide-char/UTF-8 code],
+ [ --enable-widec deprecated, wide-character/UTF-8 is always enabled],
[with_widec=$enableval],
[with_widec=no])
AC_MSG_RESULT($with_widec)
- if test "$with_widec" = yes ; then
- AC_DEFINE(WIDECHAR, 1, [Define to 1 if you want wide-character code])
- fi
- AM_CONDITIONAL([WIDECHAR], [test "$with_widec" = yes])
+ AC_MSG_WARN([--enable-widec is deprecated, wide-character/UTF-8 is always enabled])
])
diff --git a/aclocal.m4 b/aclocal.m4
index 9e9eb84..a0afcea 100644
--- a/aclocal.m4
+++ b/aclocal.m4
@@ -1,6 +1,6 @@
-# generated automatically by aclocal 1.14 -*- Autoconf -*-
+# generated automatically by aclocal 1.16.1 -*- Autoconf -*-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2018 Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -20,7 +20,7 @@
If you have problems, you may need to regenerate the build system entirely.
To do so, use the procedure documented by the package, typically 'autoreconf'.])])
-# Copyright (C) 2002-2013 Free Software Foundation, Inc.
+# Copyright (C) 2002-2018 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -32,10 +32,10 @@
# generated from the m4 files accompanying Automake X.Y.
# (This private macro should not be called outside this file.)
AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.14'
+[am__api_version='1.16'
dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
dnl require some minimum version. Point them to the right macro.
-m4_if([$1], [1.14], [],
+m4_if([$1], [1.16.1], [],
[AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
])
@@ -51,14 +51,14 @@
# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.14])dnl
+[AM_AUTOMAKE_VERSION([1.16.1])dnl
m4_ifndef([AC_AUTOCONF_VERSION],
[m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
# AM_AUX_DIR_EXPAND -*- Autoconf -*-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2018 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -103,15 +103,14 @@
# configured tree to be moved without reconfiguration.
AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
+[AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
])
# AM_CONDITIONAL -*- Autoconf -*-
-# Copyright (C) 1997-2013 Free Software Foundation, Inc.
+# Copyright (C) 1997-2018 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -142,7 +141,7 @@
Usually this means the macro was only invoked conditionally.]])
fi])])
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2018 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -333,13 +332,12 @@
# Generate code to set up dependency tracking. -*- Autoconf -*-
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2018 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
-
# _AM_OUTPUT_DEPENDENCY_COMMANDS
# ------------------------------
AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
@@ -347,49 +345,41 @@
# Older Autoconf quotes --file arguments for eval, but not when files
# are listed without --file. Let's play safe and only enable the eval
# if we detect the quoting.
- case $CONFIG_FILES in
- *\'*) eval set x "$CONFIG_FILES" ;;
- *) set x $CONFIG_FILES ;;
- esac
+ # TODO: see whether this extra hack can be removed once we start
+ # requiring Autoconf 2.70 or later.
+ AS_CASE([$CONFIG_FILES],
+ [*\'*], [eval set x "$CONFIG_FILES"],
+ [*], [set x $CONFIG_FILES])
shift
- for mf
+ # Used to flag and report bootstrapping failures.
+ am_rc=0
+ for am_mf
do
# Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named 'Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
+ am_mf=`AS_ECHO(["$am_mf"]) | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile which includes
+ # dependency-tracking related rules and includes.
+ # Grep'ing the whole file directly is not great: AIX grep has a line
# limit of 2048, but all sed's we know have understand at least 4000.
- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`AS_DIRNAME("$mf")`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running 'make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "$am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`AS_DIRNAME(["$file"])`
- AS_MKDIR_P([$dirpart/$fdir])
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
+ sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \
+ || continue
+ am_dirpart=`AS_DIRNAME(["$am_mf"])`
+ am_filepart=`AS_BASENAME(["$am_mf"])`
+ AM_RUN_LOG([cd "$am_dirpart" \
+ && sed -e '/# am--include-marker/d' "$am_filepart" \
+ | $MAKE -f - am--depfiles]) || am_rc=$?
done
+ if test $am_rc -ne 0; then
+ AC_MSG_FAILURE([Something went wrong bootstrapping makefile fragments
+ for automatic dependency tracking. Try re-running configure with the
+ '--disable-dependency-tracking' option to at least be able to build
+ the package (albeit without support for automatic dependency tracking).])
+ fi
+ AS_UNSET([am_dirpart])
+ AS_UNSET([am_filepart])
+ AS_UNSET([am_mf])
+ AS_UNSET([am_rc])
+ rm -f conftest-deps.mk
}
])# _AM_OUTPUT_DEPENDENCY_COMMANDS
@@ -398,18 +388,17 @@
# -----------------------------
# This macro should only be invoked once -- use via AC_REQUIRE.
#
-# This code is only required when automatic dependency tracking
-# is enabled. FIXME. This creates each '.P' file that we will
-# need in order to bootstrap the dependency handling code.
+# This code is only required when automatic dependency tracking is enabled.
+# This creates each '.Po' and '.Plo' makefile fragment that we'll need in
+# order to bootstrap the dependency handling code.
AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
[AC_CONFIG_COMMANDS([depfiles],
[test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
- [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
+ [AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"])])
# Do all the work for Automake. -*- Autoconf -*-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2018 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -496,11 +485,11 @@
AC_REQUIRE([AC_PROG_MKDIR_P])dnl
# For better backward compatibility. To be removed once Automake 1.9.x
# dies out for good. For more background, see:
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+# <https://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <https://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
+# We need awk for the "check" target (and possibly the TAP driver). The
+# system "awk" is bad on some platforms.
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_SET_LEADING_DOT])dnl
@@ -564,7 +553,7 @@
Aborting the configuration process, to ensure you take notice of the issue.
You can download and install GNU coreutils to get an 'rm' implementation
-that behaves properly: <http://www.gnu.org/software/coreutils/>.
+that behaves properly: <https://www.gnu.org/software/coreutils/>.
If you want to complete the configuration process using your problematic
'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
@@ -573,7 +562,11 @@
END
AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
fi
-fi])
+fi
+dnl The trailing newline in this macro's definition is deliberate, for
+dnl backward compatibility and to allow trailing 'dnl'-style comments
+dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
+])
dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion. Do not
dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
@@ -602,7 +595,7 @@
done
echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2018 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -613,7 +606,7 @@
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-if test x"${install_sh}" != xset; then
+if test x"${install_sh+set}" != xset; then
case $am_aux_dir in
*\ * | *\ *)
install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
@@ -623,7 +616,7 @@
fi
AC_SUBST([install_sh])])
-# Copyright (C) 2003-2013 Free Software Foundation, Inc.
+# Copyright (C) 2003-2018 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -644,7 +637,7 @@
# Check to see how 'make' treats includes. -*- Autoconf -*-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2018 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -652,49 +645,42 @@
# AM_MAKE_INCLUDE()
# -----------------
-# Check to see how make treats includes.
+# Check whether make has an 'include' directive that can support all
+# the idioms we need for our automatic dependency tracking code.
AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
+[AC_MSG_CHECKING([whether ${MAKE-make} supports the include directive])
+cat > confinc.mk << 'END'
am__doit:
- @echo this is the am__doit target
+ @echo this is the am__doit target >confinc.out
.PHONY: am__doit
END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
am__include="#"
am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from 'make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
- am__include=include
- am__quote=
- _am_result=GNU
- ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- case `$am_make -s -f confmf 2> /dev/null` in #(
- *the\ am__doit\ target*)
- am__include=.include
- am__quote="\""
- _am_result=BSD
- ;;
- esac
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
+# BSD make does it like this.
+echo '.include "confinc.mk" # ignored' > confmf.BSD
+# Other make implementations (GNU, Solaris 10, AIX) do it like this.
+echo 'include confinc.mk # ignored' > confmf.GNU
+_am_result=no
+for s in GNU BSD; do
+ AM_RUN_LOG([${MAKE-make} -f confmf.$s && cat confinc.out])
+ AS_CASE([$?:`cat confinc.out 2>/dev/null`],
+ ['0:this is the am__doit target'],
+ [AS_CASE([$s],
+ [BSD], [am__include='.include' am__quote='"'],
+ [am__include='include' am__quote=''])])
+ if test "$am__include" != "#"; then
+ _am_result="yes ($s style)"
+ break
+ fi
+done
+rm -f confinc.* confmf.*
+AC_MSG_RESULT([${_am_result}])
+AC_SUBST([am__include])])
+AC_SUBST([am__quote])])
# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*-
-# Copyright (C) 1997-2013 Free Software Foundation, Inc.
+# Copyright (C) 1997-2018 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -733,7 +719,7 @@
# Helper functions for option handling. -*- Autoconf -*-
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2018 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -762,7 +748,7 @@
AC_DEFUN([_AM_IF_OPTION],
[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2018 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -809,7 +795,7 @@
# For backward compatibility.
AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2018 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -828,7 +814,7 @@
# Check to make sure that the build environment is sane. -*- Autoconf -*-
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2018 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -909,7 +895,7 @@
rm -f conftest.file
])
-# Copyright (C) 2009-2013 Free Software Foundation, Inc.
+# Copyright (C) 2009-2018 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -969,7 +955,7 @@
_AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
])
-# Copyright (C) 2001-2013 Free Software Foundation, Inc.
+# Copyright (C) 2001-2018 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -997,7 +983,7 @@
INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])
-# Copyright (C) 2006-2013 Free Software Foundation, Inc.
+# Copyright (C) 2006-2018 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -1016,7 +1002,7 @@
# Check how to create a tarball. -*- Autoconf -*-
-# Copyright (C) 2004-2013 Free Software Foundation, Inc.
+# Copyright (C) 2004-2018 Free Software Foundation, Inc.
#
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
diff --git a/compile b/compile
index 531136b..99e5052 100755
--- a/compile
+++ b/compile
@@ -1,9 +1,9 @@
#! /bin/sh
# Wrapper for compilers which do not understand '-c -o'.
-scriptversion=2012-10-14.11; # UTC
+scriptversion=2018-03-07.03; # UTC
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2018 Free Software Foundation, Inc.
# Written by Tom Tromey <tromey@cygnus.com>.
#
# This program is free software; you can redistribute it and/or modify
@@ -17,7 +17,7 @@
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
+# along with this program. If not, see <https://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -255,7 +255,8 @@
echo "compile $scriptversion"
exit $?
;;
- cl | *[/\\]cl | cl.exe | *[/\\]cl.exe )
+ cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \
+ icl | *[/\\]icl | icl.exe | *[/\\]icl.exe )
func_cl_wrapper "$@" # Doesn't return...
;;
esac
@@ -339,9 +340,9 @@
# Local Variables:
# mode: shell-script
# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
+# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
+# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
diff --git a/config.guess b/config.guess
index b79252d..256083a 100755
--- a/config.guess
+++ b/config.guess
@@ -1,8 +1,8 @@
#! /bin/sh
# Attempt to guess a canonical system name.
-# Copyright 1992-2013 Free Software Foundation, Inc.
+# Copyright 1992-2018 Free Software Foundation, Inc.
-timestamp='2013-06-10'
+timestamp='2018-03-08'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -15,7 +15,7 @@
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, see <http://www.gnu.org/licenses/>.
+# along with this program; if not, see <https://www.gnu.org/licenses/>.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -24,12 +24,12 @@
# program. This Exception is an additional permission under section 7
# of the GNU General Public License, version 3 ("GPLv3").
#
-# Originally written by Per Bothner.
+# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
#
# You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
#
-# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+# Please send patches to <config-patches@gnu.org>.
me=`echo "$0" | sed -e 's,.*/,,'`
@@ -39,7 +39,7 @@
Output the configuration name of the system \`$me' is run on.
-Operation modes:
+Options:
-h, --help print this help, then exit
-t, --time-stamp print date of last modification, then exit
-v, --version print version number, then exit
@@ -50,7 +50,7 @@
GNU config.guess ($timestamp)
Originally written by Per Bothner.
-Copyright 1992-2013 Free Software Foundation, Inc.
+Copyright 1992-2018 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -107,9 +107,9 @@
dummy=$tmp/dummy ;
tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
case $CC_FOR_BUILD,$HOST_CC,$CC in
- ,,) echo "int x;" > $dummy.c ;
+ ,,) echo "int x;" > "$dummy.c" ;
for c in cc gcc c89 c99 ; do
- if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+ if ($c -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then
CC_FOR_BUILD="$c"; break ;
fi ;
done ;
@@ -132,14 +132,14 @@
UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
-case "${UNAME_SYSTEM}" in
+case "$UNAME_SYSTEM" in
Linux|GNU|GNU/*)
# If the system lacks a compiler, then just pick glibc.
# We could probably try harder.
LIBC=gnu
- eval $set_cc_for_build
- cat <<-EOF > $dummy.c
+ eval "$set_cc_for_build"
+ cat <<-EOF > "$dummy.c"
#include <features.h>
#if defined(__UCLIBC__)
LIBC=uclibc
@@ -149,13 +149,20 @@
LIBC=gnu
#endif
EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
+ eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`"
+
+ # If ldd exists, use it to detect musl libc.
+ if command -v ldd >/dev/null && \
+ ldd --version 2>&1 | grep -q ^musl
+ then
+ LIBC=musl
+ fi
;;
esac
# Note: order is significant - the case branches are not exclusive.
-case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+case "$UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION" in
*:NetBSD:*:*)
# NetBSD (nbsd) targets should (where applicable) match one or
# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
@@ -168,21 +175,31 @@
# Note: NetBSD doesn't particularly care about the vendor
# portion of the name. We always set it to "unknown".
sysctl="sysctl -n hw.machine_arch"
- UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
- /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
- case "${UNAME_MACHINE_ARCH}" in
+ UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \
+ "/sbin/$sysctl" 2>/dev/null || \
+ "/usr/sbin/$sysctl" 2>/dev/null || \
+ echo unknown)`
+ case "$UNAME_MACHINE_ARCH" in
armeb) machine=armeb-unknown ;;
arm*) machine=arm-unknown ;;
sh3el) machine=shl-unknown ;;
sh3eb) machine=sh-unknown ;;
sh5el) machine=sh5le-unknown ;;
- *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+ earmv*)
+ arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'`
+ endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'`
+ machine="${arch}${endian}"-unknown
+ ;;
+ *) machine="$UNAME_MACHINE_ARCH"-unknown ;;
esac
# The Operating System including object format, if it has switched
- # to ELF recently, or will in the future.
- case "${UNAME_MACHINE_ARCH}" in
+ # to ELF recently (or will in the future) and ABI.
+ case "$UNAME_MACHINE_ARCH" in
+ earm*)
+ os=netbsdelf
+ ;;
arm*|i386|m68k|ns32k|sh3*|sparc|vax)
- eval $set_cc_for_build
+ eval "$set_cc_for_build"
if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ELF__
then
@@ -197,44 +214,67 @@
os=netbsd
;;
esac
+ # Determine ABI tags.
+ case "$UNAME_MACHINE_ARCH" in
+ earm*)
+ expr='s/^earmv[0-9]/-eabi/;s/eb$//'
+ abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"`
+ ;;
+ esac
# The OS release
# Debian GNU/NetBSD machines have a different userland, and
# thus, need a distinct triplet. However, they do not need
# kernel version information, so it can be replaced with a
# suitable tag, in the style of linux-gnu.
- case "${UNAME_VERSION}" in
+ case "$UNAME_VERSION" in
Debian*)
release='-gnu'
;;
*)
- release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2`
;;
esac
# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
# contains redundant information, the shorter form:
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
- echo "${machine}-${os}${release}"
+ echo "$machine-${os}${release}${abi}"
exit ;;
*:Bitrig:*:*)
UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
- echo ${UNAME_MACHINE_ARCH}-unknown-bitrig${UNAME_RELEASE}
+ echo "$UNAME_MACHINE_ARCH"-unknown-bitrig"$UNAME_RELEASE"
exit ;;
*:OpenBSD:*:*)
UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
- echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+ echo "$UNAME_MACHINE_ARCH"-unknown-openbsd"$UNAME_RELEASE"
+ exit ;;
+ *:LibertyBSD:*:*)
+ UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'`
+ echo "$UNAME_MACHINE_ARCH"-unknown-libertybsd"$UNAME_RELEASE"
+ exit ;;
+ *:MidnightBSD:*:*)
+ echo "$UNAME_MACHINE"-unknown-midnightbsd"$UNAME_RELEASE"
exit ;;
*:ekkoBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+ echo "$UNAME_MACHINE"-unknown-ekkobsd"$UNAME_RELEASE"
exit ;;
*:SolidBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE}
+ echo "$UNAME_MACHINE"-unknown-solidbsd"$UNAME_RELEASE"
exit ;;
macppc:MirBSD:*:*)
- echo powerpc-unknown-mirbsd${UNAME_RELEASE}
+ echo powerpc-unknown-mirbsd"$UNAME_RELEASE"
exit ;;
*:MirBSD:*:*)
- echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+ echo "$UNAME_MACHINE"-unknown-mirbsd"$UNAME_RELEASE"
exit ;;
+ *:Sortix:*:*)
+ echo "$UNAME_MACHINE"-unknown-sortix
+ exit ;;
+ *:Redox:*:*)
+ echo "$UNAME_MACHINE"-unknown-redox
+ exit ;;
+ mips:OSF1:*.*)
+ echo mips-dec-osf1
+ exit ;;
alpha:OSF1:*:*)
case $UNAME_RELEASE in
*4.0)
@@ -251,63 +291,54 @@
ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
case "$ALPHA_CPU_TYPE" in
"EV4 (21064)")
- UNAME_MACHINE="alpha" ;;
+ UNAME_MACHINE=alpha ;;
"EV4.5 (21064)")
- UNAME_MACHINE="alpha" ;;
+ UNAME_MACHINE=alpha ;;
"LCA4 (21066/21068)")
- UNAME_MACHINE="alpha" ;;
+ UNAME_MACHINE=alpha ;;
"EV5 (21164)")
- UNAME_MACHINE="alphaev5" ;;
+ UNAME_MACHINE=alphaev5 ;;
"EV5.6 (21164A)")
- UNAME_MACHINE="alphaev56" ;;
+ UNAME_MACHINE=alphaev56 ;;
"EV5.6 (21164PC)")
- UNAME_MACHINE="alphapca56" ;;
+ UNAME_MACHINE=alphapca56 ;;
"EV5.7 (21164PC)")
- UNAME_MACHINE="alphapca57" ;;
+ UNAME_MACHINE=alphapca57 ;;
"EV6 (21264)")
- UNAME_MACHINE="alphaev6" ;;
+ UNAME_MACHINE=alphaev6 ;;
"EV6.7 (21264A)")
- UNAME_MACHINE="alphaev67" ;;
+ UNAME_MACHINE=alphaev67 ;;
"EV6.8CB (21264C)")
- UNAME_MACHINE="alphaev68" ;;
+ UNAME_MACHINE=alphaev68 ;;
"EV6.8AL (21264B)")
- UNAME_MACHINE="alphaev68" ;;
+ UNAME_MACHINE=alphaev68 ;;
"EV6.8CX (21264D)")
- UNAME_MACHINE="alphaev68" ;;
+ UNAME_MACHINE=alphaev68 ;;
"EV6.9A (21264/EV69A)")
- UNAME_MACHINE="alphaev69" ;;
+ UNAME_MACHINE=alphaev69 ;;
"EV7 (21364)")
- UNAME_MACHINE="alphaev7" ;;
+ UNAME_MACHINE=alphaev7 ;;
"EV7.9 (21364A)")
- UNAME_MACHINE="alphaev79" ;;
+ UNAME_MACHINE=alphaev79 ;;
esac
# A Pn.n version is a patched version.
# A Vn.n version is a released version.
# A Tn.n version is a released field test version.
# A Xn.n version is an unreleased experimental baselevel.
# 1.2 uses "1.2" for uname -r.
- echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+ echo "$UNAME_MACHINE"-dec-osf"`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`"
# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
exitcode=$?
trap '' 0
exit $exitcode ;;
- Alpha\ *:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # Should we change UNAME_MACHINE based on the output of uname instead
- # of the specific Alpha model?
- echo alpha-pc-interix
- exit ;;
- 21064:Windows_NT:50:3)
- echo alpha-dec-winnt3.5
- exit ;;
Amiga*:UNIX_System_V:4.0:*)
echo m68k-unknown-sysv4
exit ;;
*:[Aa]miga[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-amigaos
+ echo "$UNAME_MACHINE"-unknown-amigaos
exit ;;
*:[Mm]orph[Oo][Ss]:*:*)
- echo ${UNAME_MACHINE}-unknown-morphos
+ echo "$UNAME_MACHINE"-unknown-morphos
exit ;;
*:OS/390:*:*)
echo i370-ibm-openedition
@@ -319,7 +350,7 @@
echo powerpc-ibm-os400
exit ;;
arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
- echo arm-acorn-riscix${UNAME_RELEASE}
+ echo arm-acorn-riscix"$UNAME_RELEASE"
exit ;;
arm*:riscos:*:*|arm*:RISCOS:*:*)
echo arm-unknown-riscos
@@ -346,38 +377,38 @@
sparc) echo sparc-icl-nx7; exit ;;
esac ;;
s390x:SunOS:*:*)
- echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ echo "$UNAME_MACHINE"-ibm-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`"
exit ;;
sun4H:SunOS:5.*:*)
- echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ echo sparc-hal-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
exit ;;
sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
- echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ echo sparc-sun-solaris2"`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`"
exit ;;
i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
- echo i386-pc-auroraux${UNAME_RELEASE}
+ echo i386-pc-auroraux"$UNAME_RELEASE"
exit ;;
i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
- eval $set_cc_for_build
- SUN_ARCH="i386"
+ eval "$set_cc_for_build"
+ SUN_ARCH=i386
# If there is a compiler, see if it is configured for 64-bit objects.
# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
# This test works for both compilers.
- if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+ if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
- (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
grep IS_64BIT_ARCH >/dev/null
then
- SUN_ARCH="x86_64"
+ SUN_ARCH=x86_64
fi
fi
- echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ echo "$SUN_ARCH"-pc-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
exit ;;
sun4*:SunOS:6*:*)
# According to config.sub, this is the proper way to canonicalize
# SunOS6. Hard to guess exactly what SunOS6 will be like, but
# it's likely to be more like Solaris than SunOS4.
- echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ echo sparc-sun-solaris3"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
exit ;;
sun4*:SunOS:*:*)
case "`/usr/bin/arch -k`" in
@@ -386,25 +417,25 @@
;;
esac
# Japanese Language versions have a version number like `4.1.3-JL'.
- echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+ echo sparc-sun-sunos"`echo "$UNAME_RELEASE"|sed -e 's/-/_/'`"
exit ;;
sun3*:SunOS:*:*)
- echo m68k-sun-sunos${UNAME_RELEASE}
+ echo m68k-sun-sunos"$UNAME_RELEASE"
exit ;;
sun*:*:4.2BSD:*)
UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
- test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+ test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3
case "`/bin/arch`" in
sun3)
- echo m68k-sun-sunos${UNAME_RELEASE}
+ echo m68k-sun-sunos"$UNAME_RELEASE"
;;
sun4)
- echo sparc-sun-sunos${UNAME_RELEASE}
+ echo sparc-sun-sunos"$UNAME_RELEASE"
;;
esac
exit ;;
aushp:SunOS:*:*)
- echo sparc-auspex-sunos${UNAME_RELEASE}
+ echo sparc-auspex-sunos"$UNAME_RELEASE"
exit ;;
# The situation for MiNT is a little confusing. The machine name
# can be virtually everything (everything which is not
@@ -415,44 +446,44 @@
# MiNT. But MiNT is downward compatible to TOS, so this should
# be no problem.
atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
+ echo m68k-atari-mint"$UNAME_RELEASE"
exit ;;
atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
+ echo m68k-atari-mint"$UNAME_RELEASE"
exit ;;
*falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
- echo m68k-atari-mint${UNAME_RELEASE}
+ echo m68k-atari-mint"$UNAME_RELEASE"
exit ;;
milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
- echo m68k-milan-mint${UNAME_RELEASE}
+ echo m68k-milan-mint"$UNAME_RELEASE"
exit ;;
hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
- echo m68k-hades-mint${UNAME_RELEASE}
+ echo m68k-hades-mint"$UNAME_RELEASE"
exit ;;
*:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
- echo m68k-unknown-mint${UNAME_RELEASE}
+ echo m68k-unknown-mint"$UNAME_RELEASE"
exit ;;
m68k:machten:*:*)
- echo m68k-apple-machten${UNAME_RELEASE}
+ echo m68k-apple-machten"$UNAME_RELEASE"
exit ;;
powerpc:machten:*:*)
- echo powerpc-apple-machten${UNAME_RELEASE}
+ echo powerpc-apple-machten"$UNAME_RELEASE"
exit ;;
RISC*:Mach:*:*)
echo mips-dec-mach_bsd4.3
exit ;;
RISC*:ULTRIX:*:*)
- echo mips-dec-ultrix${UNAME_RELEASE}
+ echo mips-dec-ultrix"$UNAME_RELEASE"
exit ;;
VAX*:ULTRIX*:*:*)
- echo vax-dec-ultrix${UNAME_RELEASE}
+ echo vax-dec-ultrix"$UNAME_RELEASE"
exit ;;
2020:CLIX:*:* | 2430:CLIX:*:*)
- echo clipper-intergraph-clix${UNAME_RELEASE}
+ echo clipper-intergraph-clix"$UNAME_RELEASE"
exit ;;
mips:*:*:UMIPS | mips:*:*:RISCos)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
+ eval "$set_cc_for_build"
+ sed 's/^ //' << EOF > "$dummy.c"
#ifdef __cplusplus
#include <stdio.h> /* for printf() prototype */
int main (int argc, char *argv[]) {
@@ -461,23 +492,23 @@
#endif
#if defined (host_mips) && defined (MIPSEB)
#if defined (SYSTYPE_SYSV)
- printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+ printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0);
#endif
#if defined (SYSTYPE_SVR4)
- printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+ printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0);
#endif
#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
- printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+ printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0);
#endif
#endif
exit (-1);
}
EOF
- $CC_FOR_BUILD -o $dummy $dummy.c &&
- dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
- SYSTEM_NAME=`$dummy $dummyarg` &&
+ $CC_FOR_BUILD -o "$dummy" "$dummy.c" &&
+ dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+ SYSTEM_NAME=`"$dummy" "$dummyarg"` &&
{ echo "$SYSTEM_NAME"; exit; }
- echo mips-mips-riscos${UNAME_RELEASE}
+ echo mips-mips-riscos"$UNAME_RELEASE"
exit ;;
Motorola:PowerMAX_OS:*:*)
echo powerpc-motorola-powermax
@@ -503,17 +534,17 @@
AViiON:dgux:*:*)
# DG/UX returns AViiON for all architectures
UNAME_PROCESSOR=`/usr/bin/uname -p`
- if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+ if [ "$UNAME_PROCESSOR" = mc88100 ] || [ "$UNAME_PROCESSOR" = mc88110 ]
then
- if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
- [ ${TARGET_BINARY_INTERFACE}x = x ]
+ if [ "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx ] || \
+ [ "$TARGET_BINARY_INTERFACE"x = x ]
then
- echo m88k-dg-dgux${UNAME_RELEASE}
+ echo m88k-dg-dgux"$UNAME_RELEASE"
else
- echo m88k-dg-dguxbcs${UNAME_RELEASE}
+ echo m88k-dg-dguxbcs"$UNAME_RELEASE"
fi
else
- echo i586-dg-dgux${UNAME_RELEASE}
+ echo i586-dg-dgux"$UNAME_RELEASE"
fi
exit ;;
M88*:DolphinOS:*:*) # DolphinOS (SVR3)
@@ -530,7 +561,7 @@
echo m68k-tektronix-bsd
exit ;;
*:IRIX*:*:*)
- echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+ echo mips-sgi-irix"`echo "$UNAME_RELEASE"|sed -e 's/-/_/g'`"
exit ;;
????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id
@@ -542,14 +573,14 @@
if [ -x /usr/bin/oslevel ] ; then
IBM_REV=`/usr/bin/oslevel`
else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ IBM_REV="$UNAME_VERSION.$UNAME_RELEASE"
fi
- echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+ echo "$UNAME_MACHINE"-ibm-aix"$IBM_REV"
exit ;;
*:AIX:2:3)
if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
+ eval "$set_cc_for_build"
+ sed 's/^ //' << EOF > "$dummy.c"
#include <sys/systemcfg.h>
main()
@@ -560,7 +591,7 @@
exit(0);
}
EOF
- if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+ if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"`
then
echo "$SYSTEM_NAME"
else
@@ -574,26 +605,27 @@
exit ;;
*:AIX:*:[4567])
IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
- if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+ if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then
IBM_ARCH=rs6000
else
IBM_ARCH=powerpc
fi
- if [ -x /usr/bin/oslevel ] ; then
- IBM_REV=`/usr/bin/oslevel`
+ if [ -x /usr/bin/lslpp ] ; then
+ IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc |
+ awk -F: '{ print $3 }' | sed s/[0-9]*$/0/`
else
- IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+ IBM_REV="$UNAME_VERSION.$UNAME_RELEASE"
fi
- echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+ echo "$IBM_ARCH"-ibm-aix"$IBM_REV"
exit ;;
*:AIX:*:*)
echo rs6000-ibm-aix
exit ;;
- ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+ ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*)
echo romp-ibm-bsd4.4
exit ;;
ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
- echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to
+ echo romp-ibm-bsd"$UNAME_RELEASE" # 4.3 with uname added to
exit ;; # report: romp-ibm BSD 4.3
*:BOSX:*:*)
echo rs6000-bull-bosx
@@ -608,28 +640,28 @@
echo m68k-hp-bsd4.4
exit ;;
9000/[34678]??:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- case "${UNAME_MACHINE}" in
- 9000/31? ) HP_ARCH=m68000 ;;
- 9000/[34]?? ) HP_ARCH=m68k ;;
+ HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'`
+ case "$UNAME_MACHINE" in
+ 9000/31?) HP_ARCH=m68000 ;;
+ 9000/[34]??) HP_ARCH=m68k ;;
9000/[678][0-9][0-9])
if [ -x /usr/bin/getconf ]; then
sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
- case "${sc_cpu_version}" in
- 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
- 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+ case "$sc_cpu_version" in
+ 523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0
+ 528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1
532) # CPU_PA_RISC2_0
- case "${sc_kernel_bits}" in
- 32) HP_ARCH="hppa2.0n" ;;
- 64) HP_ARCH="hppa2.0w" ;;
- '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20
+ case "$sc_kernel_bits" in
+ 32) HP_ARCH=hppa2.0n ;;
+ 64) HP_ARCH=hppa2.0w ;;
+ '') HP_ARCH=hppa2.0 ;; # HP-UX 10.20
esac ;;
esac
fi
- if [ "${HP_ARCH}" = "" ]; then
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
+ if [ "$HP_ARCH" = "" ]; then
+ eval "$set_cc_for_build"
+ sed 's/^ //' << EOF > "$dummy.c"
#define _HPUX_SOURCE
#include <stdlib.h>
@@ -662,13 +694,13 @@
exit (0);
}
EOF
- (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+ (CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"`
test -z "$HP_ARCH" && HP_ARCH=hppa
fi ;;
esac
- if [ ${HP_ARCH} = "hppa2.0w" ]
+ if [ "$HP_ARCH" = hppa2.0w ]
then
- eval $set_cc_for_build
+ eval "$set_cc_for_build"
# hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
# 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
@@ -679,23 +711,23 @@
# $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
# => hppa64-hp-hpux11.23
- if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+ if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) |
grep -q __LP64__
then
- HP_ARCH="hppa2.0w"
+ HP_ARCH=hppa2.0w
else
- HP_ARCH="hppa64"
+ HP_ARCH=hppa64
fi
fi
- echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+ echo "$HP_ARCH"-hp-hpux"$HPUX_REV"
exit ;;
ia64:HP-UX:*:*)
- HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
- echo ia64-hp-hpux${HPUX_REV}
+ HPUX_REV=`echo "$UNAME_RELEASE"|sed -e 's/[^.]*.[0B]*//'`
+ echo ia64-hp-hpux"$HPUX_REV"
exit ;;
3050*:HI-UX:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
+ eval "$set_cc_for_build"
+ sed 's/^ //' << EOF > "$dummy.c"
#include <unistd.h>
int
main ()
@@ -720,11 +752,11 @@
exit (0);
}
EOF
- $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+ $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` &&
{ echo "$SYSTEM_NAME"; exit; }
echo unknown-hitachi-hiuxwe2
exit ;;
- 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+ 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*)
echo hppa1.1-hp-bsd
exit ;;
9000/8??:4.3bsd:*:*)
@@ -733,7 +765,7 @@
*9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
echo hppa1.0-hp-mpeix
exit ;;
- hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+ hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*)
echo hppa1.1-hp-osf
exit ;;
hp8??:OSF1:*:*)
@@ -741,9 +773,9 @@
exit ;;
i*86:OSF1:*:*)
if [ -x /usr/sbin/sysversion ] ; then
- echo ${UNAME_MACHINE}-unknown-osf1mk
+ echo "$UNAME_MACHINE"-unknown-osf1mk
else
- echo ${UNAME_MACHINE}-unknown-osf1
+ echo "$UNAME_MACHINE"-unknown-osf1
fi
exit ;;
parisc*:Lites*:*:*)
@@ -768,127 +800,109 @@
echo c4-convex-bsd
exit ;;
CRAY*Y-MP:*:*:*)
- echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ echo ymp-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
exit ;;
CRAY*[A-Z]90:*:*:*)
- echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+ echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \
| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
-e 's/\.[^.]*$/.X/'
exit ;;
CRAY*TS:*:*:*)
- echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ echo t90-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
exit ;;
CRAY*T3E:*:*:*)
- echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ echo alphaev5-cray-unicosmk"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
exit ;;
CRAY*SV1:*:*:*)
- echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ echo sv1-cray-unicos"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
exit ;;
*:UNICOS/mp:*:*)
- echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+ echo craynv-cray-unicosmp"$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'
exit ;;
F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
- FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+ FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
+ FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
+ FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'`
echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
exit ;;
5000:UNIX_System_V:4.*:*)
- FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
- FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+ FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
+ FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'`
echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
exit ;;
i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
- echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+ echo "$UNAME_MACHINE"-pc-bsdi"$UNAME_RELEASE"
exit ;;
sparc*:BSD/OS:*:*)
- echo sparc-unknown-bsdi${UNAME_RELEASE}
+ echo sparc-unknown-bsdi"$UNAME_RELEASE"
exit ;;
*:BSD/OS:*:*)
- echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+ echo "$UNAME_MACHINE"-unknown-bsdi"$UNAME_RELEASE"
exit ;;
*:FreeBSD:*:*)
UNAME_PROCESSOR=`/usr/bin/uname -p`
- case ${UNAME_PROCESSOR} in
+ case "$UNAME_PROCESSOR" in
amd64)
- echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
- *)
- echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+ UNAME_PROCESSOR=x86_64 ;;
+ i386)
+ UNAME_PROCESSOR=i586 ;;
esac
+ echo "$UNAME_PROCESSOR"-unknown-freebsd"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`"
exit ;;
i*:CYGWIN*:*)
- echo ${UNAME_MACHINE}-pc-cygwin
+ echo "$UNAME_MACHINE"-pc-cygwin
exit ;;
*:MINGW64*:*)
- echo ${UNAME_MACHINE}-pc-mingw64
+ echo "$UNAME_MACHINE"-pc-mingw64
exit ;;
*:MINGW*:*)
- echo ${UNAME_MACHINE}-pc-mingw32
+ echo "$UNAME_MACHINE"-pc-mingw32
exit ;;
- i*:MSYS*:*)
- echo ${UNAME_MACHINE}-pc-msys
- exit ;;
- i*:windows32*:*)
- # uname -m includes "-pc" on this system.
- echo ${UNAME_MACHINE}-mingw32
+ *:MSYS*:*)
+ echo "$UNAME_MACHINE"-pc-msys
exit ;;
i*:PW*:*)
- echo ${UNAME_MACHINE}-pc-pw32
+ echo "$UNAME_MACHINE"-pc-pw32
exit ;;
*:Interix*:*)
- case ${UNAME_MACHINE} in
+ case "$UNAME_MACHINE" in
x86)
- echo i586-pc-interix${UNAME_RELEASE}
+ echo i586-pc-interix"$UNAME_RELEASE"
exit ;;
authenticamd | genuineintel | EM64T)
- echo x86_64-unknown-interix${UNAME_RELEASE}
+ echo x86_64-unknown-interix"$UNAME_RELEASE"
exit ;;
IA64)
- echo ia64-unknown-interix${UNAME_RELEASE}
+ echo ia64-unknown-interix"$UNAME_RELEASE"
exit ;;
esac ;;
- [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
- echo i${UNAME_MACHINE}-pc-mks
- exit ;;
- 8664:Windows_NT:*)
- echo x86_64-pc-mks
- exit ;;
- i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
- # How do we know it's Interix rather than the generic POSIX subsystem?
- # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
- # UNAME_MACHINE based on the output of uname instead of i386?
- echo i586-pc-interix
- exit ;;
i*:UWIN*:*)
- echo ${UNAME_MACHINE}-pc-uwin
+ echo "$UNAME_MACHINE"-pc-uwin
exit ;;
amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
echo x86_64-unknown-cygwin
exit ;;
- p*:CYGWIN*:*)
- echo powerpcle-unknown-cygwin
- exit ;;
prep*:SunOS:5.*:*)
- echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+ echo powerpcle-unknown-solaris2"`echo "$UNAME_RELEASE"|sed -e 's/[^.]*//'`"
exit ;;
*:GNU:*:*)
# the GNU system
- echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+ echo "`echo "$UNAME_MACHINE"|sed -e 's,[-/].*$,,'`-unknown-$LIBC`echo "$UNAME_RELEASE"|sed -e 's,/.*$,,'`"
exit ;;
*:GNU/*:*:*)
# other systems with GNU libc and userland
- echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC}
+ echo "$UNAME_MACHINE-unknown-`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`-$LIBC"
exit ;;
i*86:Minix:*:*)
- echo ${UNAME_MACHINE}-pc-minix
+ echo "$UNAME_MACHINE"-pc-minix
exit ;;
aarch64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
aarch64_be:Linux:*:*)
UNAME_MACHINE=aarch64_be
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
alpha:Linux:*:*)
case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
@@ -901,58 +915,64 @@
EV68*) UNAME_MACHINE=alphaev68 ;;
esac
objdump --private-headers /bin/sh | grep -q ld.so.1
- if test "$?" = 0 ; then LIBC="gnulibc1" ; fi
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ if test "$?" = 0 ; then LIBC=gnulibc1 ; fi
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
arc:Linux:*:* | arceb:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
arm*:Linux:*:*)
- eval $set_cc_for_build
+ eval "$set_cc_for_build"
if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ARM_EABI__
then
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
else
if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ARM_PCS_VFP
then
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabi
else
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"eabihf
fi
fi
exit ;;
avr32*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
cris:Linux:*:*)
- echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+ echo "$UNAME_MACHINE"-axis-linux-"$LIBC"
exit ;;
crisv32:Linux:*:*)
- echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+ echo "$UNAME_MACHINE"-axis-linux-"$LIBC"
+ exit ;;
+ e2k:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
frv:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
hexagon:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
i*86:Linux:*:*)
- echo ${UNAME_MACHINE}-pc-linux-${LIBC}
+ echo "$UNAME_MACHINE"-pc-linux-"$LIBC"
exit ;;
ia64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
+ exit ;;
+ k1om:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
m32r*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
m68*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
mips:Linux:*:* | mips64:Linux:*:*)
- eval $set_cc_for_build
- sed 's/^ //' << EOF >$dummy.c
+ eval "$set_cc_for_build"
+ sed 's/^ //' << EOF > "$dummy.c"
#undef CPU
#undef ${UNAME_MACHINE}
#undef ${UNAME_MACHINE}el
@@ -966,64 +986,70 @@
#endif
#endif
EOF
- eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
- test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
+ eval "`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU'`"
+ test "x$CPU" != x && { echo "$CPU-unknown-linux-$LIBC"; exit; }
;;
- or1k:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ mips64el:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
- or32:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ openrisc*:Linux:*:*)
+ echo or1k-unknown-linux-"$LIBC"
+ exit ;;
+ or32:Linux:*:* | or1k*:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
padre:Linux:*:*)
- echo sparc-unknown-linux-${LIBC}
+ echo sparc-unknown-linux-"$LIBC"
exit ;;
parisc64:Linux:*:* | hppa64:Linux:*:*)
- echo hppa64-unknown-linux-${LIBC}
+ echo hppa64-unknown-linux-"$LIBC"
exit ;;
parisc:Linux:*:* | hppa:Linux:*:*)
# Look for CPU level
case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
- PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
- PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
- *) echo hppa-unknown-linux-${LIBC} ;;
+ PA7*) echo hppa1.1-unknown-linux-"$LIBC" ;;
+ PA8*) echo hppa2.0-unknown-linux-"$LIBC" ;;
+ *) echo hppa-unknown-linux-"$LIBC" ;;
esac
exit ;;
ppc64:Linux:*:*)
- echo powerpc64-unknown-linux-${LIBC}
+ echo powerpc64-unknown-linux-"$LIBC"
exit ;;
ppc:Linux:*:*)
- echo powerpc-unknown-linux-${LIBC}
+ echo powerpc-unknown-linux-"$LIBC"
exit ;;
ppc64le:Linux:*:*)
- echo powerpc64le-unknown-linux-${LIBC}
+ echo powerpc64le-unknown-linux-"$LIBC"
exit ;;
ppcle:Linux:*:*)
- echo powerpcle-unknown-linux-${LIBC}
+ echo powerpcle-unknown-linux-"$LIBC"
+ exit ;;
+ riscv32:Linux:*:* | riscv64:Linux:*:*)
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
s390:Linux:*:* | s390x:Linux:*:*)
- echo ${UNAME_MACHINE}-ibm-linux-${LIBC}
+ echo "$UNAME_MACHINE"-ibm-linux-"$LIBC"
exit ;;
sh64*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
sh*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
sparc:Linux:*:* | sparc64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
tile*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
vax:Linux:*:*)
- echo ${UNAME_MACHINE}-dec-linux-${LIBC}
+ echo "$UNAME_MACHINE"-dec-linux-"$LIBC"
exit ;;
x86_64:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ echo "$UNAME_MACHINE"-pc-linux-"$LIBC"
exit ;;
xtensa*:Linux:*:*)
- echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+ echo "$UNAME_MACHINE"-unknown-linux-"$LIBC"
exit ;;
i*86:DYNIX/ptx:4*:*)
# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
@@ -1037,34 +1063,34 @@
# I am not positive that other SVR4 systems won't match this,
# I just have to hope. -- rms.
# Use sysv4.2uw... so that sysv4* matches it.
- echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+ echo "$UNAME_MACHINE"-pc-sysv4.2uw"$UNAME_VERSION"
exit ;;
i*86:OS/2:*:*)
# If we were able to find `uname', then EMX Unix compatibility
# is probably installed.
- echo ${UNAME_MACHINE}-pc-os2-emx
+ echo "$UNAME_MACHINE"-pc-os2-emx
exit ;;
i*86:XTS-300:*:STOP)
- echo ${UNAME_MACHINE}-unknown-stop
+ echo "$UNAME_MACHINE"-unknown-stop
exit ;;
i*86:atheos:*:*)
- echo ${UNAME_MACHINE}-unknown-atheos
+ echo "$UNAME_MACHINE"-unknown-atheos
exit ;;
i*86:syllable:*:*)
- echo ${UNAME_MACHINE}-pc-syllable
+ echo "$UNAME_MACHINE"-pc-syllable
exit ;;
i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
- echo i386-unknown-lynxos${UNAME_RELEASE}
+ echo i386-unknown-lynxos"$UNAME_RELEASE"
exit ;;
i*86:*DOS:*:*)
- echo ${UNAME_MACHINE}-pc-msdosdjgpp
+ echo "$UNAME_MACHINE"-pc-msdosdjgpp
exit ;;
- i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
- UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+ i*86:*:4.*:*)
+ UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'`
if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
- echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+ echo "$UNAME_MACHINE"-univel-sysv"$UNAME_REL"
else
- echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+ echo "$UNAME_MACHINE"-pc-sysv"$UNAME_REL"
fi
exit ;;
i*86:*:5:[678]*)
@@ -1074,12 +1100,12 @@
*Pentium) UNAME_MACHINE=i586 ;;
*Pent*|*Celeron) UNAME_MACHINE=i686 ;;
esac
- echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+ echo "$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}{$UNAME_VERSION}"
exit ;;
i*86:*:3.2:*)
if test -f /usr/options/cb.name; then
UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
- echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+ echo "$UNAME_MACHINE"-pc-isc"$UNAME_REL"
elif /bin/uname -X 2>/dev/null >/dev/null ; then
UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
@@ -1089,9 +1115,9 @@
&& UNAME_MACHINE=i686
(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
&& UNAME_MACHINE=i686
- echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+ echo "$UNAME_MACHINE"-pc-sco"$UNAME_REL"
else
- echo ${UNAME_MACHINE}-pc-sysv32
+ echo "$UNAME_MACHINE"-pc-sysv32
fi
exit ;;
pc:*:*:*)
@@ -1099,7 +1125,7 @@
# uname -m prints for DJGPP always 'pc', but it prints nothing about
# the processor, so we play safe by assuming i586.
# Note: whatever this is, it MUST be the same as what config.sub
- # prints for the "djgpp" host, or else GDB configury will decide that
+ # prints for the "djgpp" host, or else GDB configure will decide that
# this is a cross-build.
echo i586-pc-msdosdjgpp
exit ;;
@@ -1111,9 +1137,9 @@
exit ;;
i860:*:4.*:*) # i860-SVR4
if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
- echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+ echo i860-stardent-sysv"$UNAME_RELEASE" # Stardent Vistra i860-SVR4
else # Add other i860-SVR4 vendors below as they are discovered.
- echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4
+ echo i860-unknown-sysv"$UNAME_RELEASE" # Unknown i860-SVR4
fi
exit ;;
mini*:CTIX:SYS*5:*)
@@ -1133,9 +1159,9 @@
test -r /etc/.relid \
&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ && { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
&& { echo i486-ncr-sysv4; exit; } ;;
@@ -1144,28 +1170,28 @@
test -r /etc/.relid \
&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
- && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+ && { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
- && { echo i586-ncr-sysv4.3${OS_REL}; exit; }
+ && { echo i586-ncr-sysv4.3"$OS_REL"; exit; }
/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
- && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+ && { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
- echo m68k-unknown-lynxos${UNAME_RELEASE}
+ echo m68k-unknown-lynxos"$UNAME_RELEASE"
exit ;;
mc68030:UNIX_System_V:4.*:*)
echo m68k-atari-sysv4
exit ;;
TSUNAMI:LynxOS:2.*:*)
- echo sparc-unknown-lynxos${UNAME_RELEASE}
+ echo sparc-unknown-lynxos"$UNAME_RELEASE"
exit ;;
rs6000:LynxOS:2.*:*)
- echo rs6000-unknown-lynxos${UNAME_RELEASE}
+ echo rs6000-unknown-lynxos"$UNAME_RELEASE"
exit ;;
PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
- echo powerpc-unknown-lynxos${UNAME_RELEASE}
+ echo powerpc-unknown-lynxos"$UNAME_RELEASE"
exit ;;
SM[BE]S:UNIX_SV:*:*)
- echo mips-dde-sysv${UNAME_RELEASE}
+ echo mips-dde-sysv"$UNAME_RELEASE"
exit ;;
RM*:ReliantUNIX-*:*:*)
echo mips-sni-sysv4
@@ -1176,7 +1202,7 @@
*:SINIX-*:*:*)
if uname -p 2>/dev/null >/dev/null ; then
UNAME_MACHINE=`(uname -p) 2>/dev/null`
- echo ${UNAME_MACHINE}-sni-sysv4
+ echo "$UNAME_MACHINE"-sni-sysv4
else
echo ns32k-sni-sysv
fi
@@ -1196,23 +1222,23 @@
exit ;;
i*86:VOS:*:*)
# From Paul.Green@stratus.com.
- echo ${UNAME_MACHINE}-stratus-vos
+ echo "$UNAME_MACHINE"-stratus-vos
exit ;;
*:VOS:*:*)
# From Paul.Green@stratus.com.
echo hppa1.1-stratus-vos
exit ;;
mc68*:A/UX:*:*)
- echo m68k-apple-aux${UNAME_RELEASE}
+ echo m68k-apple-aux"$UNAME_RELEASE"
exit ;;
news*:NEWS-OS:6*:*)
echo mips-sony-newsos6
exit ;;
R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
if [ -d /usr/nec ]; then
- echo mips-nec-sysv${UNAME_RELEASE}
+ echo mips-nec-sysv"$UNAME_RELEASE"
else
- echo mips-unknown-sysv${UNAME_RELEASE}
+ echo mips-unknown-sysv"$UNAME_RELEASE"
fi
exit ;;
BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
@@ -1231,67 +1257,93 @@
echo x86_64-unknown-haiku
exit ;;
SX-4:SUPER-UX:*:*)
- echo sx4-nec-superux${UNAME_RELEASE}
+ echo sx4-nec-superux"$UNAME_RELEASE"
exit ;;
SX-5:SUPER-UX:*:*)
- echo sx5-nec-superux${UNAME_RELEASE}
+ echo sx5-nec-superux"$UNAME_RELEASE"
exit ;;
SX-6:SUPER-UX:*:*)
- echo sx6-nec-superux${UNAME_RELEASE}
+ echo sx6-nec-superux"$UNAME_RELEASE"
exit ;;
SX-7:SUPER-UX:*:*)
- echo sx7-nec-superux${UNAME_RELEASE}
+ echo sx7-nec-superux"$UNAME_RELEASE"
exit ;;
SX-8:SUPER-UX:*:*)
- echo sx8-nec-superux${UNAME_RELEASE}
+ echo sx8-nec-superux"$UNAME_RELEASE"
exit ;;
SX-8R:SUPER-UX:*:*)
- echo sx8r-nec-superux${UNAME_RELEASE}
+ echo sx8r-nec-superux"$UNAME_RELEASE"
+ exit ;;
+ SX-ACE:SUPER-UX:*:*)
+ echo sxace-nec-superux"$UNAME_RELEASE"
exit ;;
Power*:Rhapsody:*:*)
- echo powerpc-apple-rhapsody${UNAME_RELEASE}
+ echo powerpc-apple-rhapsody"$UNAME_RELEASE"
exit ;;
*:Rhapsody:*:*)
- echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+ echo "$UNAME_MACHINE"-apple-rhapsody"$UNAME_RELEASE"
exit ;;
*:Darwin:*:*)
UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
- eval $set_cc_for_build
+ eval "$set_cc_for_build"
if test "$UNAME_PROCESSOR" = unknown ; then
UNAME_PROCESSOR=powerpc
fi
- if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
- if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
- (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
- grep IS_64BIT_ARCH >/dev/null
- then
- case $UNAME_PROCESSOR in
- i386) UNAME_PROCESSOR=x86_64 ;;
- powerpc) UNAME_PROCESSOR=powerpc64 ;;
- esac
+ if test "`echo "$UNAME_RELEASE" | sed -e 's/\..*//'`" -le 10 ; then
+ if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
+ if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_64BIT_ARCH >/dev/null
+ then
+ case $UNAME_PROCESSOR in
+ i386) UNAME_PROCESSOR=x86_64 ;;
+ powerpc) UNAME_PROCESSOR=powerpc64 ;;
+ esac
+ fi
+ # On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc
+ if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \
+ (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+ grep IS_PPC >/dev/null
+ then
+ UNAME_PROCESSOR=powerpc
+ fi
fi
+ elif test "$UNAME_PROCESSOR" = i386 ; then
+ # Avoid executing cc on OS X 10.9, as it ships with a stub
+ # that puts up a graphical alert prompting to install
+ # developer tools. Any system running Mac OS X 10.7 or
+ # later (Darwin 11 and later) is required to have a 64-bit
+ # processor. This is not true of the ARM version of Darwin
+ # that Apple uses in portable devices.
+ UNAME_PROCESSOR=x86_64
fi
- echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+ echo "$UNAME_PROCESSOR"-apple-darwin"$UNAME_RELEASE"
exit ;;
*:procnto*:*:* | *:QNX:[0123456789]*:*)
UNAME_PROCESSOR=`uname -p`
- if test "$UNAME_PROCESSOR" = "x86"; then
+ if test "$UNAME_PROCESSOR" = x86; then
UNAME_PROCESSOR=i386
UNAME_MACHINE=pc
fi
- echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+ echo "$UNAME_PROCESSOR"-"$UNAME_MACHINE"-nto-qnx"$UNAME_RELEASE"
exit ;;
*:QNX:*:4*)
echo i386-pc-qnx
exit ;;
- NEO-?:NONSTOP_KERNEL:*:*)
- echo neo-tandem-nsk${UNAME_RELEASE}
+ NEO-*:NONSTOP_KERNEL:*:*)
+ echo neo-tandem-nsk"$UNAME_RELEASE"
exit ;;
NSE-*:NONSTOP_KERNEL:*:*)
- echo nse-tandem-nsk${UNAME_RELEASE}
+ echo nse-tandem-nsk"$UNAME_RELEASE"
exit ;;
- NSR-?:NONSTOP_KERNEL:*:*)
- echo nsr-tandem-nsk${UNAME_RELEASE}
+ NSR-*:NONSTOP_KERNEL:*:*)
+ echo nsr-tandem-nsk"$UNAME_RELEASE"
+ exit ;;
+ NSV-*:NONSTOP_KERNEL:*:*)
+ echo nsv-tandem-nsk"$UNAME_RELEASE"
+ exit ;;
+ NSX-*:NONSTOP_KERNEL:*:*)
+ echo nsx-tandem-nsk"$UNAME_RELEASE"
exit ;;
*:NonStop-UX:*:*)
echo mips-compaq-nonstopux
@@ -1300,18 +1352,18 @@
echo bs2000-siemens-sysv
exit ;;
DS/*:UNIX_System_V:*:*)
- echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+ echo "$UNAME_MACHINE"-"$UNAME_SYSTEM"-"$UNAME_RELEASE"
exit ;;
*:Plan9:*:*)
# "uname -m" is not consistent, so use $cputype instead. 386
# is converted to i386 for consistency with other x86
# operating systems.
- if test "$cputype" = "386"; then
+ if test "$cputype" = 386; then
UNAME_MACHINE=i386
else
UNAME_MACHINE="$cputype"
fi
- echo ${UNAME_MACHINE}-unknown-plan9
+ echo "$UNAME_MACHINE"-unknown-plan9
exit ;;
*:TOPS-10:*:*)
echo pdp10-unknown-tops10
@@ -1332,14 +1384,14 @@
echo pdp10-unknown-its
exit ;;
SEI:*:*:SEIUX)
- echo mips-sei-seiux${UNAME_RELEASE}
+ echo mips-sei-seiux"$UNAME_RELEASE"
exit ;;
*:DragonFly:*:*)
- echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+ echo "$UNAME_MACHINE"-unknown-dragonfly"`echo "$UNAME_RELEASE"|sed -e 's/[-(].*//'`"
exit ;;
*:*VMS:*:*)
UNAME_MACHINE=`(uname -p) 2>/dev/null`
- case "${UNAME_MACHINE}" in
+ case "$UNAME_MACHINE" in
A*) echo alpha-dec-vms ; exit ;;
I*) echo ia64-dec-vms ; exit ;;
V*) echo vax-dec-vms ; exit ;;
@@ -1348,182 +1400,48 @@
echo i386-pc-xenix
exit ;;
i*86:skyos:*:*)
- echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+ echo "$UNAME_MACHINE"-pc-skyos"`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'`"
exit ;;
i*86:rdos:*:*)
- echo ${UNAME_MACHINE}-pc-rdos
+ echo "$UNAME_MACHINE"-pc-rdos
exit ;;
i*86:AROS:*:*)
- echo ${UNAME_MACHINE}-pc-aros
+ echo "$UNAME_MACHINE"-pc-aros
exit ;;
x86_64:VMkernel:*:*)
- echo ${UNAME_MACHINE}-unknown-esx
+ echo "$UNAME_MACHINE"-unknown-esx
+ exit ;;
+ amd64:Isilon\ OneFS:*:*)
+ echo x86_64-unknown-onefs
exit ;;
esac
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
- /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
- I don't know.... */
- printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
- printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
- "4"
-#else
- ""
-#endif
- ); exit (0);
-#endif
-#endif
+echo "$0: unable to guess system type" >&2
-#if defined (__arm) && defined (__acorn) && defined (__unix)
- printf ("arm-acorn-riscix\n"); exit (0);
-#endif
+case "$UNAME_MACHINE:$UNAME_SYSTEM" in
+ mips:Linux | mips64:Linux)
+ # If we got here on MIPS GNU/Linux, output extra information.
+ cat >&2 <<EOF
-#if defined (hp300) && !defined (hpux)
- printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
- int version;
- version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
- if (version < 4)
- printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
- else
- printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
- exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
- printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
- printf ("ns32k-encore-mach\n"); exit (0);
-#else
- printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
- printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
- printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
- printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
- struct utsname un;
-
- uname(&un);
-
- if (strncmp(un.version, "V2", 2) == 0) {
- printf ("i386-sequent-ptx2\n"); exit (0);
- }
- if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
- printf ("i386-sequent-ptx1\n"); exit (0);
- }
- printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-# include <sys/param.h>
-# if defined (BSD)
-# if BSD == 43
- printf ("vax-dec-bsd4.3\n"); exit (0);
-# else
-# if BSD == 199006
- printf ("vax-dec-bsd4.3reno\n"); exit (0);
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# endif
-# else
- printf ("vax-dec-bsd\n"); exit (0);
-# endif
-# else
- printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
- printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
- exit (1);
-}
+NOTE: MIPS GNU/Linux systems require a C compiler to fully recognize
+the system type. Please install a C compiler and try again.
EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
- { echo "$SYSTEM_NAME"; exit; }
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
- case `getsysinfo -f cpu_type` in
- c1*)
- echo c1-convex-bsd
- exit ;;
- c2*)
- if getsysinfo -f scalar_acc
- then echo c32-convex-bsd
- else echo c2-convex-bsd
- fi
- exit ;;
- c34*)
- echo c34-convex-bsd
- exit ;;
- c38*)
- echo c38-convex-bsd
- exit ;;
- c4*)
- echo c4-convex-bsd
- exit ;;
- esac
-fi
+ ;;
+esac
cat >&2 <<EOF
-$0: unable to guess system type
-This script, last modified $timestamp, has failed to recognize
-the operating system you are using. It is advised that you
-download the most up to date version of the config scripts from
+This script (version $timestamp), has failed to recognize the
+operating system you are using. If your script is old, overwrite *all*
+copies of config.guess and config.sub with the latest versions from:
- http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+ https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
and
- http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+ https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
-If the version you run ($0) is already up to date, please
-send the following data and any information you think might be
-pertinent to <config-patches@gnu.org> in order to provide the needed
-information to handle your system.
+If $0 has already been updated, send the following data and any
+information you think might be pertinent to config-patches@gnu.org to
+provide the necessary information to handle your system.
config.guess timestamp = $timestamp
@@ -1542,16 +1460,16 @@
/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
-UNAME_MACHINE = ${UNAME_MACHINE}
-UNAME_RELEASE = ${UNAME_RELEASE}
-UNAME_SYSTEM = ${UNAME_SYSTEM}
-UNAME_VERSION = ${UNAME_VERSION}
+UNAME_MACHINE = "$UNAME_MACHINE"
+UNAME_RELEASE = "$UNAME_RELEASE"
+UNAME_SYSTEM = "$UNAME_SYSTEM"
+UNAME_VERSION = "$UNAME_VERSION"
EOF
exit 1
# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
+# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "timestamp='"
# time-stamp-format: "%:y-%02m-%02d"
# time-stamp-end: "'"
diff --git a/config.h.in b/config.h.in
index 8804525..9e85673 100644
--- a/config.h.in
+++ b/config.h.in
@@ -19,12 +19,12 @@
/* Define to 1 if you have the <fcntl.h> header file. */
#undef HAVE_FCNTL_H
-/* Define to 1 if you have the `fgetln' function. */
-#undef HAVE_FGETLN
-
/* Define to 1 if you have the `fork' function. */
#undef HAVE_FORK
+/* Define to 1 if you have the `getline' function. */
+#undef HAVE_GETLINE
+
/* Define to 1 if you have getpwnam_r and getpwuid_r that are draft POSIX.1
versions. */
#undef HAVE_GETPW_R_DRAFT
@@ -51,15 +51,6 @@
/* Define to 1 if you have the `termcap' library (-ltermcap). */
#undef HAVE_LIBTERMCAP
-/* Define to 1 if you have the `terminfo' library (-lterminfo). */
-#undef HAVE_LIBTERMINFO
-
-/* Define to 1 if you have the `termlib' library (-ltermlib). */
-#undef HAVE_LIBTERMLIB
-
-/* Define to 1 if you have the `tinfo' library (-ltinfo). */
-#undef HAVE_LIBTINFO
-
/* Define to 1 if you have the <limits.h> header file. */
#undef HAVE_LIMITS_H
@@ -208,8 +199,7 @@
slash. */
#undef LSTAT_FOLLOWS_SLASHED_SYMLINK
-/* Define to the sub-directory in which libtool stores uninstalled libraries.
- */
+/* Define to the sub-directory where libtool stores uninstalled libraries. */
#undef LT_OBJDIR
/* Name of package */
@@ -264,9 +254,6 @@
/* Version number of package */
#undef VERSION
-/* Define to 1 if you want wide-character code */
-#undef WIDECHAR
-
/* Define to 1 if on MINIX. */
#undef _MINIX
diff --git a/config.sub b/config.sub
index 8b612ab..9ccf09a 100755
--- a/config.sub
+++ b/config.sub
@@ -1,8 +1,8 @@
#! /bin/sh
# Configuration validation subroutine script.
-# Copyright 1992-2013 Free Software Foundation, Inc.
+# Copyright 1992-2018 Free Software Foundation, Inc.
-timestamp='2013-04-24'
+timestamp='2018-03-08'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
@@ -15,7 +15,7 @@
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with this program; if not, see <http://www.gnu.org/licenses/>.
+# along with this program; if not, see <https://www.gnu.org/licenses/>.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -25,7 +25,7 @@
# of the GNU General Public License, version 3 ("GPLv3").
-# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+# Please send patches to <config-patches@gnu.org>.
#
# Configuration subroutine to validate and canonicalize a configuration type.
# Supply the specified configuration type as an argument.
@@ -33,7 +33,7 @@
# Otherwise, we print the canonical config type on stdout and succeed.
# You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+# https://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
# This file is supposed to be the same for all GNU packages
# and recognize all the CPU types, system types and aliases
@@ -53,12 +53,11 @@
me=`echo "$0" | sed -e 's,.*/,,'`
usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
- $0 [OPTION] ALIAS
+Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS
Canonicalize a configuration name.
-Operation modes:
+Options:
-h, --help print this help, then exit
-t, --time-stamp print date of last modification, then exit
-v, --version print version number, then exit
@@ -68,7 +67,7 @@
version="\
GNU config.sub ($timestamp)
-Copyright 1992-2013 Free Software Foundation, Inc.
+Copyright 1992-2018 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -95,7 +94,7 @@
*local*)
# First pass through any local machine types.
- echo $1
+ echo "$1"
exit ;;
* )
@@ -113,24 +112,24 @@
# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
# Here we must recognize all the valid KERNEL-OS combinations.
-maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+maybe_os=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
case $maybe_os in
nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
- knetbsd*-gnu* | netbsd*-gnu* | \
- kopensolaris*-gnu* | \
+ knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \
+ kopensolaris*-gnu* | cloudabi*-eabi* | \
storm-chaos* | os2-emx* | rtmk-nova*)
os=-$maybe_os
- basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ basic_machine=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
;;
android-linux)
os=-linux-android
- basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
+ basic_machine=`echo "$1" | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
;;
*)
- basic_machine=`echo $1 | sed 's/-[^-]*$//'`
- if [ $basic_machine != $1 ]
- then os=`echo $1 | sed 's/.*-/-/'`
+ basic_machine=`echo "$1" | sed 's/-[^-]*$//'`
+ if [ "$basic_machine" != "$1" ]
+ then os=`echo "$1" | sed 's/.*-/-/'`
else os=; fi
;;
esac
@@ -179,44 +178,44 @@
;;
-sco6)
os=-sco5v6
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
;;
-sco5)
os=-sco3.2v5
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
;;
-sco4)
os=-sco3.2v4
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
;;
-sco3.2.[4-9]*)
os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
;;
-sco3.2v[4-9]*)
# Don't forget version if it is 3.2v4 or newer.
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
;;
-sco5v6*)
# Don't forget version if it is 3.2v4 or newer.
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
;;
-sco*)
os=-sco3.2v2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
;;
-udk*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
;;
-isc)
os=-isc2.2
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
;;
-clix*)
basic_machine=clipper-intergraph
;;
-isc*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-pc/'`
;;
-lynx*178)
os=-lynxos178
@@ -228,10 +227,7 @@
os=-lynxos
;;
-ptx*)
- basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
- ;;
- -windowsnt*)
- os=`echo $os | sed -e 's/windowsnt/winnt/'`
+ basic_machine=`echo "$1" | sed -e 's/86-.*/86-sequent/'`
;;
-psos*)
os=-psos
@@ -255,16 +251,18 @@
| arc | arceb \
| arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
| avr | avr32 \
+ | ba \
| be32 | be64 \
| bfin \
- | c4x | clipper \
+ | c4x | c8051 | clipper \
| d10v | d30v | dlx | dsp16xx \
- | epiphany \
- | fido | fr30 | frv \
+ | e2k | epiphany \
+ | fido | fr30 | frv | ft32 \
| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
| hexagon \
- | i370 | i860 | i960 | ia64 \
+ | i370 | i860 | i960 | ia16 | ia64 \
| ip2k | iq2000 \
+ | k1om \
| le32 | le64 \
| lm32 \
| m32c | m32r | m32rle | m68000 | m68k | m88k \
@@ -282,8 +280,10 @@
| mips64vr5900 | mips64vr5900el \
| mipsisa32 | mipsisa32el \
| mipsisa32r2 | mipsisa32r2el \
+ | mipsisa32r6 | mipsisa32r6el \
| mipsisa64 | mipsisa64el \
| mipsisa64r2 | mipsisa64r2el \
+ | mipsisa64r6 | mipsisa64r6el \
| mipsisa64sb1 | mipsisa64sb1el \
| mipsisa64sr71k | mipsisa64sr71kel \
| mipsr5900 | mipsr5900el \
@@ -295,14 +295,15 @@
| nds32 | nds32le | nds32be \
| nios | nios2 | nios2eb | nios2el \
| ns16k | ns32k \
- | open8 \
- | or1k | or32 \
- | pdp10 | pdp11 | pj | pjl \
+ | open8 | or1k | or1knd | or32 \
+ | pdp10 | pj | pjl \
| powerpc | powerpc64 | powerpc64le | powerpcle \
+ | pru \
| pyramid \
+ | riscv32 | riscv64 \
| rl78 | rx \
| score \
- | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+ | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
| sh64 | sh64le \
| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
@@ -310,7 +311,8 @@
| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
| ubicom32 \
| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
- | we32k \
+ | visium \
+ | wasm32 \
| x86 | xc16x | xstormy16 | xtensa \
| z8k | z80)
basic_machine=$basic_machine-unknown
@@ -324,11 +326,14 @@
c6x)
basic_machine=tic6x-unknown
;;
- m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
+ leon|leon[3-9])
+ basic_machine=sparc-$basic_machine
+ ;;
+ m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
basic_machine=$basic_machine-unknown
os=-none
;;
- m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+ m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65)
;;
ms1)
basic_machine=mt-unknown
@@ -357,7 +362,7 @@
;;
# Object if more than one company name word.
*-*-*)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2
exit 1
;;
# Recognize the basic CPU types with company name.
@@ -369,18 +374,20 @@
| alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
| arm-* | armbe-* | armle-* | armeb-* | armv*-* \
| avr-* | avr32-* \
+ | ba-* \
| be32-* | be64-* \
| bfin-* | bs2000-* \
| c[123]* | c30-* | [cjt]90-* | c4x-* \
- | clipper-* | craynv-* | cydra-* \
+ | c8051-* | clipper-* | craynv-* | cydra-* \
| d10v-* | d30v-* | dlx-* \
- | elxsi-* \
+ | e2k-* | elxsi-* \
| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
| h8300-* | h8500-* \
| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
| hexagon-* \
- | i*86-* | i860-* | i960-* | ia64-* \
+ | i*86-* | i860-* | i960-* | ia16-* | ia64-* \
| ip2k-* | iq2000-* \
+ | k1om-* \
| le32-* | le64-* \
| lm32-* \
| m32c-* | m32r-* | m32rle-* \
@@ -400,8 +407,10 @@
| mips64vr5900-* | mips64vr5900el-* \
| mipsisa32-* | mipsisa32el-* \
| mipsisa32r2-* | mipsisa32r2el-* \
+ | mipsisa32r6-* | mipsisa32r6el-* \
| mipsisa64-* | mipsisa64el-* \
| mipsisa64r2-* | mipsisa64r2el-* \
+ | mipsisa64r6-* | mipsisa64r6el-* \
| mipsisa64sb1-* | mipsisa64sb1el-* \
| mipsisa64sr71k-* | mipsisa64sr71kel-* \
| mipsr5900-* | mipsr5900el-* \
@@ -413,16 +422,19 @@
| nios-* | nios2-* | nios2eb-* | nios2el-* \
| none-* | np1-* | ns16k-* | ns32k-* \
| open8-* \
+ | or1k*-* \
| orion-* \
| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
+ | pru-* \
| pyramid-* \
+ | riscv32-* | riscv64-* \
| rl78-* | romp-* | rs6000-* | rx-* \
| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
| sparclite-* \
- | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
+ | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \
| tahoe-* \
| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
| tile*-* \
@@ -430,6 +442,8 @@
| ubicom32-* \
| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
| vax-* \
+ | visium-* \
+ | wasm32-* \
| we32k-* \
| x86-* | x86_64-* | xc16x-* | xps100-* \
| xstormy16-* | xtensa*-* \
@@ -443,7 +457,7 @@
# Recognize the various machine names and aliases which stand
# for a CPU type and a company and sometimes even an OS.
386bsd)
- basic_machine=i386-unknown
+ basic_machine=i386-pc
os=-bsd
;;
3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
@@ -477,7 +491,7 @@
basic_machine=x86_64-pc
;;
amd64-*)
- basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=x86_64-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
amdahl)
basic_machine=580-amdahl
@@ -506,6 +520,9 @@
basic_machine=i386-pc
os=-aros
;;
+ asmjs)
+ basic_machine=asmjs-unknown
+ ;;
aux)
basic_machine=m68k-apple
os=-aux
@@ -519,7 +536,7 @@
os=-linux
;;
blackfin-*)
- basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=bfin-`echo "$basic_machine" | sed 's/^[^-]*-//'`
os=-linux
;;
bluegene*)
@@ -527,13 +544,13 @@
os=-cnk
;;
c54x-*)
- basic_machine=tic54x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=tic54x-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
c55x-*)
- basic_machine=tic55x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=tic55x-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
c6x-*)
- basic_machine=tic6x-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=tic6x-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
c90)
basic_machine=c90-cray
@@ -622,10 +639,18 @@
basic_machine=rs6000-bull
os=-bosx
;;
- dpx2* | dpx2*-bull)
+ dpx2*)
basic_machine=m68k-bull
os=-sysv3
;;
+ e500v[12])
+ basic_machine=powerpc-unknown
+ os=$os"spe"
+ ;;
+ e500v[12]-*)
+ basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'`
+ os=$os"spe"
+ ;;
ebmon29k)
basic_machine=a29k-amd
os=-ebmon
@@ -715,9 +740,6 @@
hp9k8[0-9][0-9] | hp8[0-9][0-9])
basic_machine=hppa1.0-hp
;;
- hppa-next)
- os=-nextstep3
- ;;
hppaosf)
basic_machine=hppa1.1-hp
os=-osf
@@ -730,26 +752,26 @@
basic_machine=i370-ibm
;;
i*86v32)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
os=-sysv32
;;
i*86v4*)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
os=-sysv4
;;
i*86v)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
os=-sysv
;;
i*86sol2)
- basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+ basic_machine=`echo "$1" | sed -e 's/86.*/86-pc/'`
os=-solaris2
;;
i386mach)
basic_machine=i386-mach
os=-mach
;;
- i386-vsta | vsta)
+ vsta)
basic_machine=i386-unknown
os=-vsta
;;
@@ -767,17 +789,17 @@
basic_machine=m68k-isi
os=-sysv
;;
+ leon-*|leon[3-9]-*)
+ basic_machine=sparc-`echo "$basic_machine" | sed 's/-.*//'`
+ ;;
m68knommu)
basic_machine=m68k-unknown
os=-linux
;;
m68knommu-*)
- basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=m68k-`echo "$basic_machine" | sed 's/^[^-]*-//'`
os=-linux
;;
- m88k-omron*)
- basic_machine=m88k-omron
- ;;
magnum | m3230)
basic_machine=mips-mips
os=-sysv
@@ -794,7 +816,7 @@
os=-mingw64
;;
mingw32)
- basic_machine=i386-pc
+ basic_machine=i686-pc
os=-mingw32
;;
mingw32ce)
@@ -809,10 +831,10 @@
os=-mint
;;
mips3*-*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+ basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'`
;;
mips3*)
- basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+ basic_machine=`echo "$basic_machine" | sed -e 's/mips3/mips64/'`-unknown
;;
monitor)
basic_machine=m68k-rom68k
@@ -822,15 +844,19 @@
basic_machine=powerpc-unknown
os=-morphos
;;
+ moxiebox)
+ basic_machine=moxie-unknown
+ os=-moxiebox
+ ;;
msdos)
basic_machine=i386-pc
os=-msdos
;;
ms1-*)
- basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
+ basic_machine=`echo "$basic_machine" | sed -e 's/ms1-/mt-/'`
;;
msys)
- basic_machine=i386-pc
+ basic_machine=i686-pc
os=-msys
;;
mvs)
@@ -869,7 +895,7 @@
basic_machine=v70-nec
os=-sysv
;;
- next | m*-next )
+ next | m*-next)
basic_machine=m68k-next
case $os in
-nextstep* )
@@ -914,6 +940,12 @@
nsr-tandem)
basic_machine=nsr-tandem
;;
+ nsv-tandem)
+ basic_machine=nsv-tandem
+ ;;
+ nsx-tandem)
+ basic_machine=nsx-tandem
+ ;;
op50n-* | op60c-*)
basic_machine=hppa1.1-oki
os=-proelf
@@ -946,7 +978,7 @@
os=-linux
;;
parisc-*)
- basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=hppa-`echo "$basic_machine" | sed 's/^[^-]*-//'`
os=-linux
;;
pbd)
@@ -962,7 +994,7 @@
basic_machine=i386-pc
;;
pc98-*)
- basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=i386-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
pentium | p5 | k5 | k6 | nexgen | viac3)
basic_machine=i586-pc
@@ -977,16 +1009,16 @@
basic_machine=i786-pc
;;
pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
- basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=i586-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
pentiumpro-* | p6-* | 6x86-* | athlon-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
- basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=i686-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
pentium4-*)
- basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=i786-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
pn)
basic_machine=pn-gould
@@ -996,23 +1028,23 @@
ppc | ppcbe) basic_machine=powerpc-unknown
;;
ppc-* | ppcbe-*)
- basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=powerpc-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
- ppcle | powerpclittle | ppc-le | powerpc-little)
+ ppcle | powerpclittle)
basic_machine=powerpcle-unknown
;;
ppcle-* | powerpclittle-*)
- basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=powerpcle-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
ppc64) basic_machine=powerpc64-unknown
;;
- ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+ ppc64-*) basic_machine=powerpc64-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
- ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+ ppc64le | powerpc64little)
basic_machine=powerpc64le-unknown
;;
ppc64le-* | powerpc64little-*)
- basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=powerpc64le-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
ps2)
basic_machine=i386-ibm
@@ -1066,17 +1098,10 @@
sequent)
basic_machine=i386-sequent
;;
- sh)
- basic_machine=sh-hitachi
- os=-hms
- ;;
sh5el)
basic_machine=sh5le-unknown
;;
- sh64)
- basic_machine=sh64-unknown
- ;;
- sparclite-wrs | simso-wrs)
+ simso-wrs)
basic_machine=sparclite-wrs
os=-vxworks
;;
@@ -1095,7 +1120,7 @@
os=-sysv4
;;
strongarm-* | thumb-*)
- basic_machine=arm-`echo $basic_machine | sed 's/^[^-]*-//'`
+ basic_machine=arm-`echo "$basic_machine" | sed 's/^[^-]*-//'`
;;
sun2)
basic_machine=m68000-sun
@@ -1217,6 +1242,9 @@
basic_machine=hppa1.1-winbond
os=-proelf
;;
+ x64)
+ basic_machine=x86_64-pc
+ ;;
xbox)
basic_machine=i686-pc
os=-mingw32
@@ -1225,20 +1253,12 @@
basic_machine=xps100-honeywell
;;
xscale-* | xscalee[bl]-*)
- basic_machine=`echo $basic_machine | sed 's/^xscale/arm/'`
+ basic_machine=`echo "$basic_machine" | sed 's/^xscale/arm/'`
;;
ymp)
basic_machine=ymp-cray
os=-unicos
;;
- z8k-*-coff)
- basic_machine=z8k-unknown
- os=-sim
- ;;
- z80-*-coff)
- basic_machine=z80-unknown
- os=-sim
- ;;
none)
basic_machine=none-none
os=-none
@@ -1267,10 +1287,6 @@
vax)
basic_machine=vax-dec
;;
- pdp10)
- # there are many clones, so DEC is not a safe bet
- basic_machine=pdp10-unknown
- ;;
pdp11)
basic_machine=pdp11-dec
;;
@@ -1280,9 +1296,6 @@
sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele)
basic_machine=sh-unknown
;;
- sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v)
- basic_machine=sparc-sun
- ;;
cydra)
basic_machine=cydra-cydrome
;;
@@ -1302,7 +1315,7 @@
# Make sure to match an already-canonicalized machine name.
;;
*)
- echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+ echo Invalid configuration \`"$1"\': machine \`"$basic_machine"\' not recognized 1>&2
exit 1
;;
esac
@@ -1310,10 +1323,10 @@
# Here we canonicalize certain aliases for manufacturers.
case $basic_machine in
*-digital*)
- basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+ basic_machine=`echo "$basic_machine" | sed 's/digital.*/dec/'`
;;
*-commodore*)
- basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+ basic_machine=`echo "$basic_machine" | sed 's/commodore.*/cbm/'`
;;
*)
;;
@@ -1324,8 +1337,8 @@
if [ x"$os" != x"" ]
then
case $os in
- # First match some system type aliases
- # that might get confused with valid system types.
+ # First match some system type aliases that might get confused
+ # with valid system types.
# -solaris* is a basic system type, with this one exception.
-auroraux)
os=-auroraux
@@ -1336,45 +1349,48 @@
-solaris)
os=-solaris2
;;
- -svr4*)
- os=-sysv4
- ;;
-unixware*)
os=-sysv4.2uw
;;
-gnu/linux*)
os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
;;
- # First accept the basic system types.
+ # es1800 is here to avoid being matched by es* (a different OS)
+ -es1800*)
+ os=-ose
+ ;;
+ # Now accept the basic system types.
# The portable systems comes first.
- # Each alternative MUST END IN A *, to match a version number.
+ # Each alternative MUST end in a * to match a version number.
# -sysv* is not here because it comes later, after sysvr4.
-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
| -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
| -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
| -sym* | -kopensolaris* | -plan9* \
| -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
- | -aos* | -aros* \
+ | -aos* | -aros* | -cloudabi* | -sortix* \
| -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
| -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
- | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
- | -bitrig* | -openbsd* | -solidbsd* \
+ | -hiux* | -knetbsd* | -mirbsd* | -netbsd* \
+ | -bitrig* | -openbsd* | -solidbsd* | -libertybsd* \
| -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
| -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
| -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
- | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
- | -chorusos* | -chorusrdb* | -cegcc* \
+ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* | -hcos* \
+ | -chorusos* | -chorusrdb* | -cegcc* | -glidix* \
| -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
- | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
+ | -midipix* | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
| -linux-newlib* | -linux-musl* | -linux-uclibc* \
- | -uxpv* | -beos* | -mpeix* | -udk* \
- | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+ | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \
+ | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* \
| -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
| -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
| -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
- | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+ | -morphos* | -superux* | -rtmk* | -windiss* \
| -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
- | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
+ | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* \
+ | -onefs* | -tirtos* | -phoenix* | -fuchsia* | -redox* | -bme* \
+ | -midnightbsd*)
# Remember, each alternative MUST END IN *, to match a version number.
;;
-qnx*)
@@ -1391,12 +1407,12 @@
-nto*)
os=`echo $os | sed -e 's|nto|nto-qnx|'`
;;
- -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
- | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+ -sim | -xray | -os68k* | -v88r* \
+ | -windows* | -osx | -abug | -netware* | -os9* \
| -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
;;
-mac*)
- os=`echo $os | sed -e 's|mac|macos|'`
+ os=`echo "$os" | sed -e 's|mac|macos|'`
;;
-linux-dietlibc)
os=-linux-dietlibc
@@ -1405,10 +1421,10 @@
os=`echo $os | sed -e 's|linux|linux-gnu|'`
;;
-sunos5*)
- os=`echo $os | sed -e 's|sunos5|solaris2|'`
+ os=`echo "$os" | sed -e 's|sunos5|solaris2|'`
;;
-sunos6*)
- os=`echo $os | sed -e 's|sunos6|solaris3|'`
+ os=`echo "$os" | sed -e 's|sunos6|solaris3|'`
;;
-opened*)
os=-openedition
@@ -1419,12 +1435,6 @@
-wince*)
os=-wince
;;
- -osfrose*)
- os=-osfrose
- ;;
- -osf*)
- os=-osf
- ;;
-utek*)
os=-bsd
;;
@@ -1449,7 +1459,7 @@
-nova*)
os=-rtmk-nova
;;
- -ns2 )
+ -ns2)
os=-nextstep2
;;
-nsk*)
@@ -1471,7 +1481,7 @@
-oss*)
os=-sysv3
;;
- -svr4)
+ -svr4*)
os=-sysv4
;;
-svr3)
@@ -1486,32 +1496,38 @@
-ose*)
os=-ose
;;
- -es1800*)
- os=-ose
- ;;
- -xenix)
- os=-xenix
- ;;
-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
os=-mint
;;
- -aros*)
- os=-aros
- ;;
-zvmoe)
os=-zvmoe
;;
-dicos*)
os=-dicos
;;
+ -pikeos*)
+ # Until real need of OS specific support for
+ # particular features comes up, bare metal
+ # configurations are quite functional.
+ case $basic_machine in
+ arm*)
+ os=-eabi
+ ;;
+ *)
+ os=-elf
+ ;;
+ esac
+ ;;
-nacl*)
;;
+ -ios)
+ ;;
-none)
;;
*)
# Get rid of the `-' at the beginning of $os.
os=`echo $os | sed 's/[^-]*-//'`
- echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+ echo Invalid configuration \`"$1"\': system \`"$os"\' not recognized 1>&2
exit 1
;;
esac
@@ -1546,6 +1562,9 @@
c4x-* | tic4x-*)
os=-coff
;;
+ c8051-*)
+ os=-elf
+ ;;
hexagon-*)
os=-elf
;;
@@ -1589,9 +1608,6 @@
mips*-*)
os=-elf
;;
- or1k-*)
- os=-elf
- ;;
or32-*)
os=-coff
;;
@@ -1601,12 +1617,12 @@
sparc-* | *-sun)
os=-sunos4.1.1
;;
+ pru-*)
+ os=-elf
+ ;;
*-be)
os=-beos
;;
- *-haiku)
- os=-haiku
- ;;
*-ibm)
os=-aix
;;
@@ -1646,7 +1662,7 @@
m88k-omron*)
os=-luna
;;
- *-next )
+ *-next)
os=-nextstep
;;
*-sequent)
@@ -1661,9 +1677,6 @@
i370-*)
os=-mvs
;;
- *-next)
- os=-nextstep3
- ;;
*-gould)
os=-sysv
;;
@@ -1773,15 +1786,15 @@
vendor=stratus
;;
esac
- basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+ basic_machine=`echo "$basic_machine" | sed "s/unknown/$vendor/"`
;;
esac
-echo $basic_machine$os
+echo "$basic_machine$os"
exit
# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
+# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "timestamp='"
# time-stamp-format: "%:y-%02m-%02d"
# time-stamp-end: "'"
diff --git a/configure b/configure
index 8d3cd37..ed3d2e9 100755
--- a/configure
+++ b/configure
@@ -586,7 +586,7 @@
# Identity of this package.
PACKAGE_NAME='libedit'
-PACKAGE_TARNAME='libedit-20130712'
+PACKAGE_TARNAME='libedit-20190324'
PACKAGE_VERSION='3.1'
PACKAGE_STRING='libedit 3.1'
PACKAGE_BUGREPORT=''
@@ -641,11 +641,12 @@
HAVE_STRLCPY_FALSE
HAVE_STRLCPY_TRUE
LIBOBJS
-WIDECHAR_FALSE
-WIDECHAR_TRUE
+ENABLE_EXAMPLES_FALSE
+ENABLE_EXAMPLES_TRUE
MANTYPE
NROFF
LT_VERSION
+LT_SYS_LIBRARY_PATH
OTOOL64
OTOOL
LIPO
@@ -684,7 +685,6 @@
AMDEPBACKSLASH
AMDEP_FALSE
AMDEP_TRUE
-am__quote
am__include
DEPDIR
am__untar
@@ -757,7 +757,8 @@
PACKAGE_TARNAME
PACKAGE_NAME
PATH_SEPARATOR
-SHELL'
+SHELL
+am__quote'
ac_subst_files=''
ac_user_opts='
enable_option_checking
@@ -767,10 +768,12 @@
enable_static
with_pic
enable_fast_install
+with_aix_soname
with_gnu_ld
with_sysroot
enable_libtool_lock
enable_widec
+enable_examples
'
ac_precious_vars='build_alias
host_alias
@@ -780,7 +783,8 @@
LDFLAGS
LIBS
CPPFLAGS
-CPP'
+CPP
+LT_SYS_LIBRARY_PATH'
# Initialize some variables set by options.
@@ -1370,7 +1374,7 @@
--localedir=DIR locale-dependent data [DATAROOTDIR/locale]
--mandir=DIR man documentation [DATAROOTDIR/man]
--docdir=DIR documentation root
- [DATAROOTDIR/doc/libedit-20130712]
+ [DATAROOTDIR/doc/libedit-20190324]
--htmldir=DIR html documentation [DOCDIR]
--dvidir=DIR dvi documentation [DOCDIR]
--pdfdir=DIR pdf documentation [DOCDIR]
@@ -1411,16 +1415,20 @@
--enable-fast-install[=PKGS]
optimize for fast installation [default=yes]
--disable-libtool-lock avoid locking (might break parallel builds)
- --enable-widec compile with wide-char/UTF-8 code
+ --enable-widec deprecated, wide-character/UTF-8 is always enabled
+ --enable-examples build the example programs [default=yes]
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use
both]
+ --with-aix-soname=aix|svr4|both
+ shared library versioning (aka "SONAME") variant to
+ provide on AIX, [default=aix].
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
- --with-sysroot=DIR Search for dependent libraries within DIR
- (or the compiler's sysroot if not specified).
+ --with-sysroot[=DIR] Search for dependent libraries within DIR (or the
+ compiler's sysroot if not specified).
Some influential environment variables:
CC C compiler command
@@ -1431,6 +1439,8 @@
CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
you have headers in a nonstandard directory <include dir>
CPP C preprocessor
+ LT_SYS_LIBRARY_PATH
+ User-defined run-time library search path.
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
@@ -2328,8 +2338,37 @@
# features of Posix that are extensions to C (define _GNU_SOURCE)
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
+ac_aux_dir=
+for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
+ if test -f "$ac_dir/install-sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f "$ac_dir/install.sh"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ elif test -f "$ac_dir/shtool"; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/shtool install -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
+fi
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
+
+
+# Expand $ac_aux_dir to an absolute path.
+am_aux_dir=`cd "$ac_aux_dir" && pwd`
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
@@ -3639,36 +3678,7 @@
-am__api_version='1.14'
-
-ac_aux_dir=
-for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do
- if test -f "$ac_dir/install-sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f "$ac_dir/install.sh"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- elif test -f "$ac_dir/shtool"; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/shtool install -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- as_fn_error $? "cannot find install-sh, install.sh, or shtool in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" "$LINENO" 5
-fi
-
-# These three variables are undocumented and unsupported,
-# and are intended to be withdrawn in a future Autoconf release.
-# They can cause serious problems if a builder's source tree is in a directory
-# whose full name contains unusual characters.
-ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
-ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
-ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
-
+am__api_version='1.16'
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
@@ -3857,7 +3867,7 @@
$as_echo "$as_me: WARNING: 'missing' script is too old or missing" >&2;}
fi
-if test x"${install_sh}" != xset; then
+if test x"${install_sh+set}" != xset; then
case $am_aux_dir in
*\ * | *\ *)
install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
@@ -4094,45 +4104,45 @@
ac_config_commands="$ac_config_commands depfiles"
-
-am_make=${MAKE-make}
-cat > confinc << 'END'
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether ${MAKE-make} supports the include directive" >&5
+$as_echo_n "checking whether ${MAKE-make} supports the include directive... " >&6; }
+cat > confinc.mk << 'END'
am__doit:
- @echo this is the am__doit target
+ @echo this is the am__doit target >confinc.out
.PHONY: am__doit
END
-# If we don't find an include directive, just comment out the code.
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for style of include used by $am_make" >&5
-$as_echo_n "checking for style of include used by $am_make... " >&6; }
am__include="#"
am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from 'make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
- am__include=include
- am__quote=
- _am_result=GNU
- ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
- echo '.include "confinc"' > confmf
- case `$am_make -s -f confmf 2> /dev/null` in #(
- *the\ am__doit\ target*)
- am__include=.include
- am__quote="\""
- _am_result=BSD
+# BSD make does it like this.
+echo '.include "confinc.mk" # ignored' > confmf.BSD
+# Other make implementations (GNU, Solaris 10, AIX) do it like this.
+echo 'include confinc.mk # ignored' > confmf.GNU
+_am_result=no
+for s in GNU BSD; do
+ { echo "$as_me:$LINENO: ${MAKE-make} -f confmf.$s && cat confinc.out" >&5
+ (${MAKE-make} -f confmf.$s && cat confinc.out) >&5 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); }
+ case $?:`cat confinc.out 2>/dev/null` in #(
+ '0:this is the am__doit target') :
+ case $s in #(
+ BSD) :
+ am__include='.include' am__quote='"' ;; #(
+ *) :
+ am__include='include' am__quote='' ;;
+esac ;; #(
+ *) :
;;
- esac
-fi
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $_am_result" >&5
-$as_echo "$_am_result" >&6; }
-rm -f confinc confmf
+esac
+ if test "$am__include" != "#"; then
+ _am_result="yes ($s style)"
+ break
+ fi
+done
+rm -f confinc.* confmf.*
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: ${_am_result}" >&5
+$as_echo "${_am_result}" >&6; }
# Check whether --enable-dependency-tracking was given.
if test "${enable_dependency_tracking+set}" = set; then :
@@ -4213,7 +4223,7 @@
# Define the identity of the package.
- PACKAGE='libedit-20130712'
+ PACKAGE='libedit-20190324'
VERSION='3.1'
@@ -4244,12 +4254,12 @@
# For better backward compatibility. To be removed once Automake 1.9.x
# dies out for good. For more background, see:
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
+# <https://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
+# <https://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
mkdir_p='$(MKDIR_P)'
-# We need awk for the "check" target. The system "awk" is bad on
-# some platforms.
+# We need awk for the "check" target (and possibly the TAP driver). The
+# system "awk" is bad on some platforms.
# Always define AMTAR for backward compatibility. Yes, it's still used
# in the wild :-( We should find a proper way to deprecate it ...
AMTAR='$${TAR-tar}'
@@ -4424,7 +4434,7 @@
Aborting the configuration process, to ensure you take notice of the issue.
You can download and install GNU coreutils to get an 'rm' implementation
-that behaves properly: <http://www.gnu.org/software/coreutils/>.
+that behaves properly: <https://www.gnu.org/software/coreutils/>.
If you want to complete the configuration process using your problematic
'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
@@ -4434,6 +4444,7 @@
as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
fi
fi
+
case `pwd` in
*\ * | *\ *)
{ $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5
@@ -4442,8 +4453,8 @@
-macro_version='2.4.2'
-macro_revision='1.3337'
+macro_version='2.4.6'
+macro_revision='2.4.6'
@@ -4457,7 +4468,7 @@
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
# Make sure we can run config.sub.
$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
@@ -4577,7 +4588,7 @@
$ECHO ""
}
-case "$ECHO" in
+case $ECHO in
printf*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: printf" >&5
$as_echo "printf" >&6; } ;;
print*) { $as_echo "$as_me:${as_lineno-$LINENO}: result: print -r" >&5
@@ -4770,19 +4781,19 @@
# Check whether --with-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then :
- withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
+ withval=$with_gnu_ld; test no = "$withval" || with_gnu_ld=yes
else
with_gnu_ld=no
fi
ac_prog=ld
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
# Check if gcc -print-prog-name=ld gives a path.
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ld used by $CC" >&5
$as_echo_n "checking for ld used by $CC... " >&6; }
case $host in
*-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
+ # gcc leaves a trailing carriage return, which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
@@ -4796,7 +4807,7 @@
while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
done
- test -z "$LD" && LD="$ac_prog"
+ test -z "$LD" && LD=$ac_prog
;;
"")
# If it fails, then pretend we aren't using GCC.
@@ -4807,7 +4818,7 @@
with_gnu_ld=unknown
;;
esac
-elif test "$with_gnu_ld" = yes; then
+elif test yes = "$with_gnu_ld"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for GNU ld" >&5
$as_echo_n "checking for GNU ld... " >&6; }
else
@@ -4818,32 +4829,32 @@
$as_echo_n "(cached) " >&6
else
if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
+ lt_cv_path_LD=$ac_dir/$ac_prog
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some variants of GNU ld only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
+ test no != "$with_gnu_ld" && break
;;
*)
- test "$with_gnu_ld" != yes && break
+ test yes != "$with_gnu_ld" && break
;;
esac
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
+ lt_cv_path_LD=$LD # Let the user override the test with a path.
fi
fi
-LD="$lt_cv_path_LD"
+LD=$lt_cv_path_LD
if test -n "$LD"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $LD" >&5
$as_echo "$LD" >&6; }
@@ -4886,33 +4897,38 @@
else
if test -n "$NM"; then
# Let the user override the test.
- lt_cv_path_NM="$NM"
+ lt_cv_path_NM=$NM
else
- lt_nm_to_check="${ac_tool_prefix}nm"
+ lt_nm_to_check=${ac_tool_prefix}nm
if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
lt_nm_to_check="$lt_nm_to_check nm"
fi
for lt_tmp_nm in $lt_nm_to_check; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/$lt_tmp_nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ tmp_nm=$ac_dir/$lt_tmp_nm
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
# Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # Adding the 'sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
# Tru64's nm complains that /dev/null is an invalid object file
- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
- */dev/null* | *'Invalid file or object type'*)
+ # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
+ case $build_os in
+ mingw*) lt_bad_file=conftest.nm/nofile ;;
+ *) lt_bad_file=/dev/null ;;
+ esac
+ case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
+ *$lt_bad_file* | *'Invalid file or object type'*)
lt_cv_path_NM="$tmp_nm -B"
- break
+ break 2
;;
*)
case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
*/dev/null*)
lt_cv_path_NM="$tmp_nm -p"
- break
+ break 2
;;
*)
lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
@@ -4923,15 +4939,15 @@
esac
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
done
: ${lt_cv_path_NM=no}
fi
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_NM" >&5
$as_echo "$lt_cv_path_NM" >&6; }
-if test "$lt_cv_path_NM" != "no"; then
- NM="$lt_cv_path_NM"
+if test no != "$lt_cv_path_NM"; then
+ NM=$lt_cv_path_NM
else
# Didn't find any BSD compatible name lister, look for dumpbin.
if test -n "$DUMPBIN"; then :
@@ -5037,9 +5053,9 @@
fi
fi
- case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
*COFF*)
- DUMPBIN="$DUMPBIN -symbols"
+ DUMPBIN="$DUMPBIN -symbols -headers"
;;
*)
DUMPBIN=:
@@ -5047,8 +5063,8 @@
esac
fi
- if test "$DUMPBIN" != ":"; then
- NM="$DUMPBIN"
+ if test : != "$DUMPBIN"; then
+ NM=$DUMPBIN
fi
fi
test -z "$NM" && NM=nm
@@ -5099,7 +5115,7 @@
$as_echo_n "(cached) " >&6
else
i=0
- teststring="ABCD"
+ teststring=ABCD
case $build_os in
msdosdjgpp*)
@@ -5139,7 +5155,7 @@
lt_cv_sys_max_cmd_len=8192;
;;
- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
# This has been around since 386BSD, at least. Likely further.
if test -x /sbin/sysctl; then
lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
@@ -5189,22 +5205,23 @@
;;
*)
lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
- if test -n "$lt_cv_sys_max_cmd_len"; then
+ if test -n "$lt_cv_sys_max_cmd_len" && \
+ test undefined != "$lt_cv_sys_max_cmd_len"; then
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
else
# Make teststring a little bigger before we do anything with it.
# a 1K string should be a reasonable start.
- for i in 1 2 3 4 5 6 7 8 ; do
+ for i in 1 2 3 4 5 6 7 8; do
teststring=$teststring$teststring
done
SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
- while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+ while { test X`env echo "$teststring$teststring" 2>/dev/null` \
= "X$teststring$teststring"; } >/dev/null 2>&1 &&
- test $i != 17 # 1/2 MB should be enough
+ test 17 != "$i" # 1/2 MB should be enough
do
i=`expr $i + 1`
teststring=$teststring$teststring
@@ -5222,7 +5239,7 @@
fi
-if test -n $lt_cv_sys_max_cmd_len ; then
+if test -n "$lt_cv_sys_max_cmd_len"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_sys_max_cmd_len" >&5
$as_echo "$lt_cv_sys_max_cmd_len" >&6; }
else
@@ -5240,30 +5257,6 @@
: ${MV="mv -f"}
: ${RM="rm -f"}
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands some XSI constructs" >&5
-$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; }
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
- test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
- = c,a/b,b/c, \
- && eval 'test $(( 1 + 1 )) -eq 2 \
- && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
- && xsi_shell=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $xsi_shell" >&5
-$as_echo "$xsi_shell" >&6; }
-
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the shell understands \"+=\"" >&5
-$as_echo_n "checking whether the shell understands \"+=\"... " >&6; }
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \
- >/dev/null 2>&1 \
- && lt_shell_append=yes
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_shell_append" >&5
-$as_echo "$lt_shell_append" >&6; }
-
-
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
lt_unset=unset
else
@@ -5386,13 +5379,13 @@
reload_cmds='$LD$reload_flag -o $output$reload_objs'
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
- if test "$GCC" != yes; then
+ if test yes != "$GCC"; then
reload_cmds=false
fi
;;
darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ if test yes = "$GCC"; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
else
reload_cmds='$LD$reload_flag -o $output$reload_objs'
fi
@@ -5520,13 +5513,13 @@
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
+# 'unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
+# that responds to the $file_magic_cmd with a given extended regex.
+# If you have 'file' or equivalent on your system and you're not sure
+# whether 'pass_all' will *always* work, you probably want this one.
case $host_os in
aix[4-9]*)
@@ -5553,8 +5546,7 @@
# Base MSYS/MinGW do not provide the 'file' command needed by
# func_win32_libid shell function, so use a weaker test based on 'objdump',
# unless we find 'file', for example because we are cross-compiling.
- # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
- if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+ if ( file / ) >/dev/null 2>&1; then
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
else
@@ -5590,10 +5582,6 @@
fi
;;
-gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
haiku*)
lt_cv_deplibs_check_method=pass_all
;;
@@ -5632,7 +5620,7 @@
;;
# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
lt_cv_deplibs_check_method=pass_all
;;
@@ -5654,8 +5642,8 @@
lt_cv_deplibs_check_method=pass_all
;;
-openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+openbsd* | bitrig*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
@@ -5708,6 +5696,9 @@
tpf*)
lt_cv_deplibs_check_method=pass_all
;;
+os2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
esac
fi
@@ -5865,8 +5856,8 @@
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
- # two different shell functions defined in ltmain.sh
- # decide which to use based on capabilities of $DLLTOOL
+ # two different shell functions defined in ltmain.sh;
+ # decide which one to use based on capabilities of $DLLTOOL
case `$DLLTOOL --help 2>&1` in
*--identify-strict*)
lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
@@ -5878,7 +5869,7 @@
;;
*)
# fallback: assume linklib IS sharedlib
- lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+ lt_cv_sharedlib_from_linklib_cmd=$ECHO
;;
esac
@@ -6032,7 +6023,7 @@
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
- if test "$ac_status" -eq 0; then
+ if test 0 -eq "$ac_status"; then
# Ensure the archiver fails upon bogus file names.
rm -f conftest.$ac_objext libconftest.a
{ { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$lt_ar_try\""; } >&5
@@ -6040,7 +6031,7 @@
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }
- if test "$ac_status" -ne 0; then
+ if test 0 -ne "$ac_status"; then
lt_cv_ar_at_file=@
fi
fi
@@ -6053,7 +6044,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ar_at_file" >&5
$as_echo "$lt_cv_ar_at_file" >&6; }
-if test "x$lt_cv_ar_at_file" = xno; then
+if test no = "$lt_cv_ar_at_file"; then
archiver_list_spec=
else
archiver_list_spec=$lt_cv_ar_at_file
@@ -6270,7 +6261,7 @@
if test -n "$RANLIB"; then
case $host_os in
- openbsd*)
+ bitrig* | openbsd*)
old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
;;
*)
@@ -6360,7 +6351,7 @@
symcode='[ABCDGISTW]'
;;
hpux*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
symcode='[ABCDEGRST]'
fi
;;
@@ -6393,14 +6384,44 @@
symcode='[ABCDGIRSTW]' ;;
esac
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Gets list of data symbols to import.
+ lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
+ # Adjust the below global symbol transforms to fixup imported variables.
+ lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
+ lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'"
+ lt_c_name_lib_hook="\
+ -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\
+ -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'"
+else
+ # Disable hooks by default.
+ lt_cv_sys_global_symbol_to_import=
+ lt_cdecl_hook=
+ lt_c_name_hook=
+ lt_c_name_lib_hook=
+fi
+
# Transform an extracted symbol line into a proper C declaration.
# Some systems (esp. on ia64) link data and code symbols differently,
# so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
+$lt_cdecl_hook\
+" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\)[ ]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
+$lt_c_name_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'"
+
+# Transform an extracted symbol line into symbol name with lib prefix and
+# symbol address.
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
+$lt_c_name_lib_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'"
# Handle CRLF in mingw tool chain
opt_cr=
@@ -6418,21 +6439,24 @@
# Write the raw and C identifiers.
if test "$lt_cv_nm_interface" = "MS dumpbin"; then
- # Fake it for dumpbin and say T for any non-static function
- # and D for any global variable.
+ # Fake it for dumpbin and say T for any non-static function,
+ # D for any global variable and I for any imported variable.
# Also find C++ and __fastcall symbols from MSVC++,
# which start with @ or ?.
lt_cv_sys_global_symbol_pipe="$AWK '"\
" {last_section=section; section=\$ 3};"\
" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
+" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
+" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
" \$ 0!~/External *\|/{next};"\
" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
" {if(hide[section]) next};"\
-" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-" s[1]~/^[@?]/{print s[1], s[1]; next};"\
-" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
+" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
+" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
" ' prfx=^$ac_symprfx"
else
lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
@@ -6480,11 +6504,11 @@
if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
cat <<_LT_EOF > conftest.$ac_ext
/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
relocations are performed -- see ld's documentation on pseudo-relocs. */
# define LT_DLSYM_CONST
-#elif defined(__osf__)
+#elif defined __osf__
/* This system does not cope well with relocations in const data. */
# define LT_DLSYM_CONST
#else
@@ -6510,7 +6534,7 @@
{
{ "@PROGRAM@", (void *) 0 },
_LT_EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
cat <<\_LT_EOF >> conftest.$ac_ext
{0, (void *) 0}
};
@@ -6530,13 +6554,13 @@
mv conftest.$ac_objext conftstm.$ac_objext
lt_globsym_save_LIBS=$LIBS
lt_globsym_save_CFLAGS=$CFLAGS
- LIBS="conftstm.$ac_objext"
+ LIBS=conftstm.$ac_objext
CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_link\""; } >&5
(eval $ac_link) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s conftest${ac_exeext}; then
+ test $ac_status = 0; } && test -s conftest$ac_exeext; then
pipe_works=yes
fi
LIBS=$lt_globsym_save_LIBS
@@ -6557,7 +6581,7 @@
rm -rf conftest* conftst*
# Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
+ if test yes = "$pipe_works"; then
break
else
lt_cv_sys_global_symbol_pipe=
@@ -6610,6 +6634,16 @@
+
+
+
+
+
+
+
+
+
+
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for sysroot" >&5
$as_echo_n "checking for sysroot... " >&6; }
@@ -6622,9 +6656,9 @@
lt_sysroot=
-case ${with_sysroot} in #(
+case $with_sysroot in #(
yes)
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
lt_sysroot=`$CC --print-sysroot 2>/dev/null`
fi
;; #(
@@ -6634,8 +6668,8 @@
no|'')
;; #(
*)
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: ${with_sysroot}" >&5
-$as_echo "${with_sysroot}" >&6; }
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_sysroot" >&5
+$as_echo "$with_sysroot" >&6; }
as_fn_error $? "The sysroot must be an absolute path." "$LINENO" 5
;;
esac
@@ -6647,18 +6681,99 @@
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for a working dd" >&5
+$as_echo_n "checking for a working dd... " >&6; }
+if ${ac_cv_path_lt_DD+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+: ${lt_DD:=$DD}
+if test -z "$lt_DD"; then
+ ac_path_lt_DD_found=false
+ # Loop through the user's path and test for each of PROGNAME-LIST
+ as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ for ac_prog in dd; do
+ for ac_exec_ext in '' $ac_executable_extensions; do
+ ac_path_lt_DD="$as_dir/$ac_prog$ac_exec_ext"
+ as_fn_executable_p "$ac_path_lt_DD" || continue
+if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
+fi
+ $ac_path_lt_DD_found && break 3
+ done
+ done
+ done
+IFS=$as_save_IFS
+ if test -z "$ac_cv_path_lt_DD"; then
+ :
+ fi
+else
+ ac_cv_path_lt_DD=$lt_DD
+fi
+
+rm -f conftest.i conftest2.i conftest.out
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_lt_DD" >&5
+$as_echo "$ac_cv_path_lt_DD" >&6; }
+
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking how to truncate binary pipes" >&5
+$as_echo_n "checking how to truncate binary pipes... " >&6; }
+if ${lt_cv_truncate_bin+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+lt_cv_truncate_bin=
+if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
+fi
+rm -f conftest.i conftest2.i conftest.out
+test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_truncate_bin" >&5
+$as_echo "$lt_cv_truncate_bin" >&6; }
+
+
+
+
+
+
+
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+ for cc_temp in $*""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+ done
+ func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
# Check whether --enable-libtool-lock was given.
if test "${enable_libtool_lock+set}" = set; then :
enableval=$enable_libtool_lock;
fi
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+test no = "$enable_libtool_lock" || enable_libtool_lock=yes
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
ia64-*-hpux*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set mode
+ # options accordingly.
echo 'int i;' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
@@ -6667,24 +6782,25 @@
test $ac_status = 0; }; then
case `/usr/bin/file conftest.$ac_objext` in
*ELF-32*)
- HPUX_IA64_MODE="32"
+ HPUX_IA64_MODE=32
;;
*ELF-64*)
- HPUX_IA64_MODE="64"
+ HPUX_IA64_MODE=64
;;
esac
fi
rm -rf conftest*
;;
*-*-irix6*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
echo '#line '$LINENO' "configure"' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
test $ac_status = 0; }; then
- if test "$lt_cv_prog_gnu_ld" = yes; then
+ if test yes = "$lt_cv_prog_gnu_ld"; then
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -melf32bsmip"
@@ -6713,9 +6829,50 @@
rm -rf conftest*
;;
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+mips64*-*linux*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
+ echo '#line '$LINENO' "configure"' > conftest.$ac_ext
+ if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
+ (eval $ac_compile) 2>&5
+ ac_status=$?
+ $as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
+ test $ac_status = 0; }; then
+ emul=elf
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ emul="${emul}32"
+ ;;
+ *64-bit*)
+ emul="${emul}64"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *MSB*)
+ emul="${emul}btsmip"
+ ;;
+ *LSB*)
+ emul="${emul}ltsmip"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *N32*)
+ emul="${emul}n32"
+ ;;
+ esac
+ LD="${LD-ld} -m $emul"
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly. Note that the listed cases only cover the
+ # situations where additional linker options are needed (such as when
+ # doing 32-bit compilation for a host where ld defaults to 64-bit, or
+ # vice versa); the common cases where no linker options are needed do
+ # not appear in the list.
echo 'int i;' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
@@ -6729,9 +6886,19 @@
LD="${LD-ld} -m elf_i386_fbsd"
;;
x86_64-*linux*)
- LD="${LD-ld} -m elf_i386"
+ case `/usr/bin/file conftest.o` in
+ *x86-64*)
+ LD="${LD-ld} -m elf32_x86_64"
+ ;;
+ *)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ esac
;;
- ppc64-*linux*|powerpc64-*linux*)
+ powerpc64le-*linux*)
+ LD="${LD-ld} -m elf32lppclinux"
+ ;;
+ powerpc64-*linux*)
LD="${LD-ld} -m elf32ppclinux"
;;
s390x-*linux*)
@@ -6750,7 +6917,10 @@
x86_64-*linux*)
LD="${LD-ld} -m elf_x86_64"
;;
- ppc*-*linux*|powerpc*-*linux*)
+ powerpcle-*linux*)
+ LD="${LD-ld} -m elf64lppc"
+ ;;
+ powerpc-*linux*)
LD="${LD-ld} -m elf64ppc"
;;
s390*-*linux*|s390*-*tpf*)
@@ -6768,7 +6938,7 @@
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
+ SAVE_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS -belf"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether the C compiler needs -belf" >&5
$as_echo_n "checking whether the C compiler needs -belf... " >&6; }
@@ -6808,13 +6978,14 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_cc_needs_belf" >&5
$as_echo "$lt_cv_cc_needs_belf" >&6; }
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ if test yes != "$lt_cv_cc_needs_belf"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
+ CFLAGS=$SAVE_CFLAGS
fi
;;
*-*solaris*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
echo 'int i;' > conftest.$ac_ext
if { { eval echo "\"\$as_me\":${as_lineno-$LINENO}: \"$ac_compile\""; } >&5
(eval $ac_compile) 2>&5
@@ -6826,7 +6997,7 @@
case $lt_cv_prog_gnu_ld in
yes*)
case $host in
- i?86-*-solaris*)
+ i?86-*-solaris*|x86_64-*-solaris*)
LD="${LD-ld} -m elf_x86_64"
;;
sparc*-*-solaris*)
@@ -6835,7 +7006,7 @@
esac
# GNU ld 2.21 introduced _sol2 emulations. Use them if available.
if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
- LD="${LD-ld}_sol2"
+ LD=${LD-ld}_sol2
fi
;;
*)
@@ -6851,7 +7022,7 @@
;;
esac
-need_locks="$enable_libtool_lock"
+need_locks=$enable_libtool_lock
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}mt", so it can be a program name with args.
@@ -6962,7 +7133,7 @@
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_path_mainfest_tool" >&5
$as_echo "$lt_cv_path_mainfest_tool" >&6; }
-if test "x$lt_cv_path_mainfest_tool" != xyes; then
+if test yes != "$lt_cv_path_mainfest_tool"; then
MANIFEST_TOOL=:
fi
@@ -7465,7 +7636,7 @@
$as_echo_n "(cached) " >&6
else
lt_cv_apple_cc_single_mod=no
- if test -z "${LT_MULTI_MODULE}"; then
+ if test -z "$LT_MULTI_MODULE"; then
# By default we will add the -single_module flag. You can override
# by either setting the environment variable LT_MULTI_MODULE
# non-empty at configure time, or by adding -multi_module to the
@@ -7483,7 +7654,7 @@
cat conftest.err >&5
# Otherwise, if the output was created with a 0 exit code from
# the compiler, it worked.
- elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+ elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
lt_cv_apple_cc_single_mod=yes
else
cat conftest.err >&5
@@ -7522,7 +7693,7 @@
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_ld_exported_symbols_list" >&5
@@ -7551,7 +7722,7 @@
_lt_result=$?
if test -s conftest.err && $GREP force_load conftest.err; then
cat conftest.err >&5
- elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+ elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
lt_cv_ld_force_load=yes
else
cat conftest.err >&5
@@ -7564,32 +7735,32 @@
$as_echo "$lt_cv_ld_force_load" >&6; }
case $host_os in
rhapsody* | darwin1.[012])
- _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
darwin1.*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
darwin*) # darwin 5.x on
# if running on 10.5 or later, the deployment target defaults
# to the OS version, if on x86, and 10.4, the deployment
# target defaults to 10.4. Don't you love it?
case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
10.0,*86*-darwin8*|10.0,*-darwin[91]*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- 10.[012]*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+ 10.[012][,.]*)
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
10.*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
esac
;;
esac
- if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ if test yes = "$lt_cv_apple_cc_single_mod"; then
_lt_dar_single_mod='$single_module'
fi
- if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
- _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ if test yes = "$lt_cv_ld_exported_symbols_list"; then
+ _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
else
- _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
fi
- if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+ if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
_lt_dsymutil='~$DSYMUTIL $lib || :'
else
_lt_dsymutil=
@@ -7597,6 +7768,41 @@
;;
esac
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+# string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+# string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+# "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+# VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+ case x$2 in
+ x)
+ ;;
+ *:)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+ ;;
+ x:*)
+ eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ *::*)
+ eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+ eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+ ;;
+ *)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ esac
+}
+
for ac_header in dlfcn.h
do :
ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
@@ -7633,14 +7839,14 @@
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac
else
@@ -7664,14 +7870,14 @@
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac
else
@@ -7695,14 +7901,14 @@
*)
pic_mode=default
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for lt_pkg in $withval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$lt_pkg" = "X$lt_p"; then
pic_mode=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac
else
@@ -7710,8 +7916,6 @@
fi
-test -z "$pic_mode" && pic_mode=default
-
@@ -7727,14 +7931,14 @@
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac
else
@@ -7748,11 +7952,63 @@
+ shared_archive_member_spec=
+case $host,$enable_shared in
+power*-*-aix[5-9]*,yes)
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking which variant of shared library versioning to provide" >&5
+$as_echo_n "checking which variant of shared library versioning to provide... " >&6; }
+
+# Check whether --with-aix-soname was given.
+if test "${with_aix_soname+set}" = set; then :
+ withval=$with_aix_soname; case $withval in
+ aix|svr4|both)
+ ;;
+ *)
+ as_fn_error $? "Unknown argument to --with-aix-soname" "$LINENO" 5
+ ;;
+ esac
+ lt_cv_with_aix_soname=$with_aix_soname
+else
+ if ${lt_cv_with_aix_soname+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ lt_cv_with_aix_soname=aix
+fi
+
+ with_aix_soname=$lt_cv_with_aix_soname
+fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_aix_soname" >&5
+$as_echo "$with_aix_soname" >&6; }
+ if test aix != "$with_aix_soname"; then
+ # For the AIX way of multilib, we name the shared archive member
+ # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
+ # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
+ # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
+ # the AIX toolchain works better with OBJECT_MODE set (default 32).
+ if test 64 = "${OBJECT_MODE-32}"; then
+ shared_archive_member_spec=shr_64
+ else
+ shared_archive_member_spec=shr
+ fi
+ fi
+ ;;
+*)
+ with_aix_soname=aix
+ ;;
+esac
+
+
+
+
+
+
+
# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
+LIBTOOL_DEPS=$ltmain
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
@@ -7801,7 +8057,7 @@
-if test -n "${ZSH_VERSION+set}" ; then
+if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
@@ -7840,7 +8096,7 @@
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
+ if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
@@ -7851,14 +8107,14 @@
ofile=libtool
can_build_shared=yes
-# All known linkers require a `.a' archive for static linking (except MSVC,
+# All known linkers require a '.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
-with_gnu_ld="$lt_cv_prog_gnu_ld"
+with_gnu_ld=$lt_cv_prog_gnu_ld
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
+old_CC=$CC
+old_CFLAGS=$CFLAGS
# Set sane defaults for various variables
test -z "$CC" && CC=cc
@@ -7867,15 +8123,8 @@
test -z "$LD" && LD=ld
test -z "$ac_objext" && ac_objext=o
-for cc_temp in $compiler""; do
- case $cc_temp in
- compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
- distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+func_cc_basename $compiler
+cc_basename=$func_cc_basename_result
# Only perform the check for file, if the check method requires it
@@ -7890,22 +8139,22 @@
else
case $MAGIC_CMD in
[\\/*] | ?:[\\/]*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
;;
*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_MAGIC_CMD=$MAGIC_CMD
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/${ac_tool_prefix}file; then
- lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -f "$ac_dir/${ac_tool_prefix}file"; then
+ lt_cv_path_MAGIC_CMD=$ac_dir/"${ac_tool_prefix}file"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
:
@@ -7928,13 +8177,13 @@
break
fi
done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
+ IFS=$lt_save_ifs
+ MAGIC_CMD=$lt_save_MAGIC_CMD
;;
esac
fi
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if test -n "$MAGIC_CMD"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
$as_echo "$MAGIC_CMD" >&6; }
@@ -7956,22 +8205,22 @@
else
case $MAGIC_CMD in
[\\/*] | ?:[\\/]*)
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
;;
*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_MAGIC_CMD=$MAGIC_CMD
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/file; then
- lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -f "$ac_dir/file"; then
+ lt_cv_path_MAGIC_CMD=$ac_dir/"file"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
:
@@ -7994,13 +8243,13 @@
break
fi
done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
+ IFS=$lt_save_ifs
+ MAGIC_CMD=$lt_save_MAGIC_CMD
;;
esac
fi
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if test -n "$MAGIC_CMD"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $MAGIC_CMD" >&5
$as_echo "$MAGIC_CMD" >&6; }
@@ -8021,7 +8270,7 @@
# Use C for the default configuration in the libtool script
-lt_save_CC="$CC"
+lt_save_CC=$CC
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -8083,7 +8332,7 @@
lt_prog_compiler_no_builtin_flag=
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
case $cc_basename in
nvcc*)
lt_prog_compiler_no_builtin_flag=' -Xcompiler -fno-builtin' ;;
@@ -8099,7 +8348,7 @@
lt_cv_prog_compiler_rtti_exceptions=no
ac_outfile=conftest.$ac_objext
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="-fno-rtti -fno-exceptions"
+ lt_compiler_flag="-fno-rtti -fno-exceptions" ## exclude from sc_useless_quotes_in_assignment
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
@@ -8129,7 +8378,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; }
-if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
+if test yes = "$lt_cv_prog_compiler_rtti_exceptions"; then
lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
else
:
@@ -8147,17 +8396,18 @@
lt_prog_compiler_static=
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_static='-static'
case $host_os in
aix*)
# All AIX code is PIC.
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
lt_prog_compiler_static='-Bstatic'
fi
+ lt_prog_compiler_pic='-fPIC'
;;
amigaos*)
@@ -8168,8 +8418,8 @@
;;
m68k)
# FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
+ # adding the '-m68020' flag to GCC prevents building anything better,
+ # like '-m68040'.
lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
;;
esac
@@ -8185,6 +8435,11 @@
# Although the cygwin gcc ignores -fPIC, still need this for old-style
# (--disable-auto-import) libraries
lt_prog_compiler_pic='-DDLL_EXPORT'
+ case $host_os in
+ os2*)
+ lt_prog_compiler_static='$wl-static'
+ ;;
+ esac
;;
darwin* | rhapsody*)
@@ -8255,7 +8510,7 @@
case $host_os in
aix*)
lt_prog_compiler_wl='-Wl,'
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
lt_prog_compiler_static='-Bstatic'
else
@@ -8263,10 +8518,29 @@
fi
;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ lt_prog_compiler_pic='-fno-common'
+ case $cc_basename in
+ nagfor*)
+ # NAG Fortran compiler
+ lt_prog_compiler_wl='-Wl,-Wl,,'
+ lt_prog_compiler_pic='-PIC'
+ lt_prog_compiler_static='-Bstatic'
+ ;;
+ esac
+ ;;
+
mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
lt_prog_compiler_pic='-DDLL_EXPORT'
+ case $host_os in
+ os2*)
+ lt_prog_compiler_static='$wl-static'
+ ;;
+ esac
;;
hpux9* | hpux10* | hpux11*)
@@ -8282,7 +8556,7 @@
;;
esac
# Is there a better lt_prog_compiler_static that works with the bundled CC?
- lt_prog_compiler_static='${wl}-a ${wl}archive'
+ lt_prog_compiler_static='$wl-a ${wl}archive'
;;
irix5* | irix6* | nonstopux*)
@@ -8291,9 +8565,9 @@
lt_prog_compiler_static='-non_shared'
;;
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
- # old Intel for x86_64 which still supported -KPIC.
+ # old Intel for x86_64, which still supported -KPIC.
ecc*)
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='-KPIC'
@@ -8318,6 +8592,12 @@
lt_prog_compiler_pic='-PIC'
lt_prog_compiler_static='-Bstatic'
;;
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ lt_prog_compiler_wl='-Wl,'
+ lt_prog_compiler_pic='-fPIC'
+ lt_prog_compiler_static='-static'
+ ;;
pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
@@ -8415,7 +8695,7 @@
;;
sysv4*MP*)
- if test -d /usr/nec ;then
+ if test -d /usr/nec; then
lt_prog_compiler_pic='-Kconform_pic'
lt_prog_compiler_static='-Bstatic'
fi
@@ -8444,7 +8724,7 @@
fi
case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
+ # For platforms that do not support PIC, -DPIC is meaningless:
*djgpp*)
lt_prog_compiler_pic=
;;
@@ -8476,7 +8756,7 @@
lt_cv_prog_compiler_pic_works=no
ac_outfile=conftest.$ac_objext
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
+ lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ## exclude from sc_useless_quotes_in_assignment
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
@@ -8506,7 +8786,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_pic_works" >&5
$as_echo "$lt_cv_prog_compiler_pic_works" >&6; }
-if test x"$lt_cv_prog_compiler_pic_works" = xyes; then
+if test yes = "$lt_cv_prog_compiler_pic_works"; then
case $lt_prog_compiler_pic in
"" | " "*) ;;
*) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
@@ -8538,7 +8818,7 @@
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler_static_works=no
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
LDFLAGS="$LDFLAGS $lt_tmp_static_flag"
echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -8557,13 +8837,13 @@
fi
fi
$RM -r conftest*
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler_static_works" >&5
$as_echo "$lt_cv_prog_compiler_static_works" >&6; }
-if test x"$lt_cv_prog_compiler_static_works" = xyes; then
+if test yes = "$lt_cv_prog_compiler_static_works"; then
:
else
lt_prog_compiler_static=
@@ -8683,8 +8963,8 @@
-hard_links="nottested"
-if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
+hard_links=nottested
+if test no = "$lt_cv_prog_compiler_c_o" && test no != "$need_locks"; then
# do not overwrite the value of need_locks provided by the user
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if we can lock with hard links" >&5
$as_echo_n "checking if we can lock with hard links... " >&6; }
@@ -8696,9 +8976,9 @@
ln conftest.a conftest.b 2>/dev/null && hard_links=no
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hard_links" >&5
$as_echo "$hard_links" >&6; }
- if test "$hard_links" = no; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
-$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
+ if test no = "$hard_links"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&5
+$as_echo "$as_me: WARNING: '$CC' does not support '-c -o', so 'make -j' may be unsafe" >&2;}
need_locks=warn
fi
else
@@ -8741,9 +9021,9 @@
# included in the symbol list
include_expsyms=
# exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
+ # it will be wrapped by ' (' and ')$', so one must not match beginning or
+ # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+ # as well as any symbol that contains 'd'.
exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*'
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
@@ -8758,7 +9038,7 @@
# FIXME: the MSVC++ port hasn't been tested in a loooong time
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
- if test "$GCC" != yes; then
+ if test yes != "$GCC"; then
with_gnu_ld=no
fi
;;
@@ -8766,7 +9046,7 @@
# we just hope/assume this is gcc and not c89 (= MSVC++)
with_gnu_ld=yes
;;
- openbsd*)
+ openbsd* | bitrig*)
with_gnu_ld=no
;;
esac
@@ -8776,7 +9056,7 @@
# On some targets, GNU ld is compatible enough with the native linker
# that we're better off using the native interface for both.
lt_use_gnu_ld_interface=no
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
case $host_os in
aix*)
# The AIX port of GNU ld has always aspired to compatibility
@@ -8798,24 +9078,24 @@
esac
fi
- if test "$lt_use_gnu_ld_interface" = yes; then
+ if test yes = "$lt_use_gnu_ld_interface"; then
# If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
+ wlarc='$wl'
# Set some defaults for GNU ld with shared library support. These
# are reset later if shared libraries are not supported. Putting them
# here allows them to be overridden if necessary.
runpath_var=LD_RUN_PATH
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- export_dynamic_flag_spec='${wl}--export-dynamic'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+ export_dynamic_flag_spec='$wl--export-dynamic'
# ancient GNU ld didn't support --whole-archive et. al.
if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
- whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ whole_archive_flag_spec=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
else
whole_archive_flag_spec=
fi
supports_anon_versioning=no
- case `$LD -v 2>&1` in
+ case `$LD -v | $SED -e 's/(^)\+)\s\+//' 2>&1` in
*GNU\ gold*) supports_anon_versioning=yes ;;
*\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
@@ -8828,7 +9108,7 @@
case $host_os in
aix[3-9]*)
# On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
+ if test ia64 != "$host_cpu"; then
ld_shlibs=no
cat <<_LT_EOF 1>&2
@@ -8847,7 +9127,7 @@
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
archive_expsym_cmds=''
;;
m68k)
@@ -8863,7 +9143,7 @@
allow_undefined_flag=unsupported
# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
- archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
else
ld_shlibs=no
fi
@@ -8873,7 +9153,7 @@
# _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
# as there is no search path for DLLs.
hardcode_libdir_flag_spec='-L$libdir'
- export_dynamic_flag_spec='${wl}--export-all-symbols'
+ export_dynamic_flag_spec='$wl--export-all-symbols'
allow_undefined_flag=unsupported
always_export_symbols=no
enable_shared_with_static_runtimes=yes
@@ -8881,61 +9161,89 @@
exclude_expsyms='[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname'
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file, use it as
+ # is; otherwise, prepend EXPORTS...
+ archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
ld_shlibs=no
fi
;;
haiku*)
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
link_all_deplibs=yes
;;
+ os2*)
+ hardcode_libdir_flag_spec='-L$libdir'
+ hardcode_minus_L=yes
+ allow_undefined_flag=unsupported
+ shrext_cmds=.dll
+ archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ enable_shared_with_static_runtimes=yes
+ ;;
+
interix[3-9]*)
hardcode_direct=no
hardcode_shlibpath_var=no
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- export_dynamic_flag_spec='${wl}-E'
+ hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+ export_dynamic_flag_spec='$wl-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ archive_expsym_cmds='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
tmp_diet=no
- if test "$host_os" = linux-dietlibc; then
+ if test linux-dietlibc = "$host_os"; then
case $cc_basename in
diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
esac
fi
if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
- && test "$tmp_diet" = no
+ && test no = "$tmp_diet"
then
tmp_addflag=' $pic_flag'
tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag'
;;
pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group f77 and f90 compilers
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag -Mnomain' ;;
ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
tmp_addflag=' -i_dynamic' ;;
@@ -8946,42 +9254,47 @@
lf95*) # Lahey Fortran 8.1
whole_archive_flag_spec=
tmp_sharedflag='--shared' ;;
+ nagfor*) # NAGFOR 5.3
+ tmp_sharedflag='-Wl,-shared' ;;
xl[cC]* | bgxl[cC]* | mpixl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below)
tmp_sharedflag='-qmkshrobj'
tmp_addflag= ;;
nvcc*) # Cuda Compiler Driver 2.2
- whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
compiler_needs_object=yes
;;
esac
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*) # Sun C 5.9
- whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ whole_archive_flag_spec='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
compiler_needs_object=yes
tmp_sharedflag='-G' ;;
*Sun\ F*) # Sun Fortran 8.3
tmp_sharedflag='-G' ;;
esac
- archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ if test yes = "$supports_anon_versioning"; then
archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
fi
case $cc_basename in
+ tcc*)
+ export_dynamic_flag_spec='-rdynamic'
+ ;;
xlf* | bgf* | bgxlf* | mpixlf*)
# IBM XL Fortran 10.1 on PPC cannot create shared libs itself
whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ if test yes = "$supports_anon_versioning"; then
archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
fi
;;
esac
@@ -8995,8 +9308,8 @@
archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
fi
;;
@@ -9014,8 +9327,8 @@
_LT_EOF
elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
@@ -9027,7 +9340,7 @@
ld_shlibs=no
cat <<_LT_EOF 1>&2
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
*** reliably create shared libraries on SCO systems. Therefore, libtool
*** is disabling shared libraries support. We urge you to upgrade GNU
*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
@@ -9042,9 +9355,9 @@
# DT_RUNPATH tag from executables and libraries. But doing so
# requires that you compile everything twice, which is a pain.
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
@@ -9061,15 +9374,15 @@
*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
;;
esac
- if test "$ld_shlibs" = no; then
+ if test no = "$ld_shlibs"; then
runpath_var=
hardcode_libdir_flag_spec=
export_dynamic_flag_spec=
@@ -9085,7 +9398,7 @@
# Note: this linker hardcodes the directories in LIBPATH if there
# are no directories specified by -L.
hardcode_minus_L=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
# Neither direct hardcoding nor static linking is supported with a
# broken collect2.
hardcode_direct=unsupported
@@ -9093,34 +9406,57 @@
;;
aix[4-9]*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
- no_entry_flag=""
+ no_entry_flag=
else
# If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- # Also, AIX nm treats weak defined symbols like other global
- # defined symbols, whereas GNU nm marks them as "W".
+ # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+ # Without the "-l" option, or with the "-B" option, AIX nm treats
+ # weak defined symbols like other global defined symbols, whereas
+ # GNU nm marks them as "W".
+ # While the 'weak' keyword is ignored in the Export File, we need
+ # it in the Import File for the 'aix-soname' feature, so we have
+ # to replace the "-B" option with "-P" for AIX nm.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && (substr(\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
else
- export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ export_symbols_cmds='`func_echo_all $NM | $SED -e '\''s/B\([^B]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && (substr(\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
+ # have runtime linking enabled, and use it for executables.
+ # For shared libraries, we enable/disable runtime linking
+ # depending on the kind of the shared library created -
+ # when "with_aix_soname,aix_use_runtimelinking" is:
+ # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
+ # "aix,yes" lib.so shared, rtl:yes, for executables
+ # lib.a static archive
+ # "both,no" lib.so.V(shr.o) shared, rtl:yes
+ # lib.a(lib.so.V) shared, rtl:no, for executables
+ # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a(lib.so.V) shared, rtl:no
+ # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a static archive
case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*)
for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
aix_use_runtimelinking=yes
break
fi
done
+ if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # With aix-soname=svr4, we create the lib.so.V shared archives only,
+ # so we don't have lib.a shared libs to link our executables.
+ # We have to force runtime linking in this case.
+ aix_use_runtimelinking=yes
+ LDFLAGS="$LDFLAGS -Wl,-brtl"
+ fi
;;
esac
@@ -9139,13 +9475,21 @@
hardcode_direct_absolute=yes
hardcode_libdir_separator=':'
link_all_deplibs=yes
- file_list_spec='${wl}-f,'
+ file_list_spec='$wl-f,'
+ case $with_aix_soname,$aix_use_runtimelinking in
+ aix,*) ;; # traditional, no import file
+ svr4,* | *,yes) # use import file
+ # The Import File defines what to hardcode.
+ hardcode_direct=no
+ hardcode_direct_absolute=no
+ ;;
+ esac
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
case $host_os in aix4.[012]|aix4.[012].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
+ collect2name=`$CC -print-prog-name=collect2`
if test -f "$collect2name" &&
strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
@@ -9164,35 +9508,42 @@
;;
esac
shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag="$shared_flag "'$wl-G'
fi
+ # Need to ensure runtime linking is disabled for the traditional
+ # shared library, or the linker may eventually find shared libraries
+ # /with/ Import File - we do not want to mix them.
+ shared_flag_aix='-shared'
+ shared_flag_svr4='-shared $wl-G'
else
# not using gcc
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag='$wl-G'
else
- shared_flag='${wl}-bM:SRE'
+ shared_flag='$wl-bM:SRE'
fi
+ shared_flag_aix='$wl-bM:SRE'
+ shared_flag_svr4='$wl-G'
fi
fi
- export_dynamic_flag_spec='${wl}-bexpall'
+ export_dynamic_flag_spec='$wl-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to export.
always_export_symbols=yes
- if test "$aix_use_runtimelinking" = yes; then
+ if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
allow_undefined_flag='-berok'
# Determine the default libpath from the value encoded in an
# empty executable.
- if test "${lt_cv_aix_libpath+set}" = set; then
+ if test set = "${lt_cv_aix_libpath+set}"; then
aix_libpath=$lt_cv_aix_libpath
else
if ${lt_cv_aix_libpath_+:} false; then :
@@ -9227,7 +9578,7 @@
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
if test -z "$lt_cv_aix_libpath_"; then
- lt_cv_aix_libpath_="/usr/lib:/lib"
+ lt_cv_aix_libpath_=/usr/lib:/lib
fi
fi
@@ -9235,17 +9586,17 @@
aix_libpath=$lt_cv_aix_libpath_
fi
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
- archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
+ archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
else
- if test "$host_cpu" = ia64; then
- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
+ if test ia64 = "$host_cpu"; then
+ hardcode_libdir_flag_spec='$wl-R $libdir:/usr/lib:/lib'
allow_undefined_flag="-z nodefs"
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an
# empty executable.
- if test "${lt_cv_aix_libpath+set}" = set; then
+ if test set = "${lt_cv_aix_libpath+set}"; then
aix_libpath=$lt_cv_aix_libpath
else
if ${lt_cv_aix_libpath_+:} false; then :
@@ -9280,7 +9631,7 @@
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
if test -z "$lt_cv_aix_libpath_"; then
- lt_cv_aix_libpath_="/usr/lib:/lib"
+ lt_cv_aix_libpath_=/usr/lib:/lib
fi
fi
@@ -9288,21 +9639,33 @@
aix_libpath=$lt_cv_aix_libpath_
fi
- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
+ hardcode_libdir_flag_spec='$wl-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
- no_undefined_flag=' ${wl}-bernotok'
- allow_undefined_flag=' ${wl}-berok'
- if test "$with_gnu_ld" = yes; then
+ no_undefined_flag=' $wl-bernotok'
+ allow_undefined_flag=' $wl-berok'
+ if test yes = "$with_gnu_ld"; then
# We only use this code for GNU lds that support --whole-archive.
- whole_archive_flag_spec='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ whole_archive_flag_spec='$wl--whole-archive$convenience $wl--no-whole-archive'
else
# Exported symbols can be pulled into shared objects from archives
whole_archive_flag_spec='$convenience'
fi
archive_cmds_need_lc=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ archive_expsym_cmds='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+ # -brtl affects multiple linker settings, -berok does not and is overridden later
+ compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([, ]\\)%-berok\\1%g"`'
+ if test svr4 != "$with_aix_soname"; then
+ # This is similar to how AIX traditionally builds its shared libraries.
+ archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+ fi
+ if test aix != "$with_aix_soname"; then
+ archive_expsym_cmds="$archive_expsym_cmds"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+ else
+ # used by -dlpreopen to get the symbols
+ archive_expsym_cmds="$archive_expsym_cmds"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
+ fi
+ archive_expsym_cmds="$archive_expsym_cmds"'~$RM -r $output_objdir/$realname.d'
fi
fi
;;
@@ -9311,7 +9674,7 @@
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
archive_expsym_cmds=''
;;
m68k)
@@ -9341,16 +9704,17 @@
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
+ shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
- archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
- archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
- else
- sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
- fi~
- $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
- linknames='
+ archive_cmds='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+ archive_expsym_cmds='if test DEF = "`$SED -n -e '\''s/^[ ]*//'\'' -e '\''/^\(;.*\)*$/d'\'' -e '\''s/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p'\'' -e q $export_symbols`" ; then
+ cp "$export_symbols" "$output_objdir/$soname.def";
+ echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+ else
+ $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
# The linker will not automatically build a static lib if we build a DLL.
# _LT_TAGVAR(old_archive_from_new_cmds, )='true'
enable_shared_with_static_runtimes=yes
@@ -9359,18 +9723,18 @@
# Don't use ranlib
old_postinstall_cmds='chmod 644 $oldlib'
postlink_cmds='lt_outputfile="@OUTPUT@"~
- lt_tool_outputfile="@TOOL_OUTPUT@"~
- case $lt_outputfile in
- *.exe|*.EXE) ;;
- *)
- lt_outputfile="$lt_outputfile.exe"
- lt_tool_outputfile="$lt_tool_outputfile.exe"
- ;;
- esac~
- if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
- $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
- $RM "$lt_outputfile.manifest";
- fi'
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile=$lt_outputfile.exe
+ lt_tool_outputfile=$lt_tool_outputfile.exe
+ ;;
+ esac~
+ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
;;
*)
# Assume MSVC wrapper
@@ -9379,7 +9743,7 @@
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
+ shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
archive_cmds='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
@@ -9398,24 +9762,24 @@
hardcode_direct=no
hardcode_automatic=yes
hardcode_shlibpath_var=unsupported
- if test "$lt_cv_ld_force_load" = "yes"; then
- whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ if test yes = "$lt_cv_ld_force_load"; then
+ whole_archive_flag_spec='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
else
whole_archive_flag_spec=''
fi
link_all_deplibs=yes
- allow_undefined_flag="$_lt_dar_allow_undefined"
+ allow_undefined_flag=$_lt_dar_allow_undefined
case $cc_basename in
- ifort*) _lt_dar_can_shared=yes ;;
+ ifort*|nagfor*) _lt_dar_can_shared=yes ;;
*) _lt_dar_can_shared=$GCC ;;
esac
- if test "$_lt_dar_can_shared" = "yes"; then
+ if test yes = "$_lt_dar_can_shared"; then
output_verbose_link_cmd=func_echo_all
- archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
- module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
- archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
- module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+ module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+ archive_expsym_cmds="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+ module_expsym_cmds="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
else
ld_shlibs=no
@@ -9457,33 +9821,33 @@
;;
hpux9*)
- if test "$GCC" = yes; then
- archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ if test yes = "$GCC"; then
+ archive_cmds='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
else
- archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
fi
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl+b $wl$libdir'
hardcode_libdir_separator=:
hardcode_direct=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L=yes
- export_dynamic_flag_spec='${wl}-E'
+ export_dynamic_flag_spec='$wl-E'
;;
hpux10*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
- archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes,no = "$GCC,$with_gnu_ld"; then
+ archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ hardcode_libdir_flag_spec='$wl+b $wl$libdir'
hardcode_libdir_separator=:
hardcode_direct=yes
hardcode_direct_absolute=yes
- export_dynamic_flag_spec='${wl}-E'
+ export_dynamic_flag_spec='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L=yes
@@ -9491,25 +9855,25 @@
;;
hpux11*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ if test yes,no = "$GCC,$with_gnu_ld"; then
case $host_cpu in
hppa*64*)
- archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- archive_cmds='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
else
case $host_cpu in
hppa*64*)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
@@ -9521,7 +9885,7 @@
$as_echo_n "(cached) " >&6
else
lt_cv_prog_compiler__b=no
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
LDFLAGS="$LDFLAGS -b"
echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -9540,14 +9904,14 @@
fi
fi
$RM -r conftest*
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_prog_compiler__b" >&5
$as_echo "$lt_cv_prog_compiler__b" >&6; }
-if test x"$lt_cv_prog_compiler__b" = xyes; then
- archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+if test yes = "$lt_cv_prog_compiler__b"; then
+ archive_cmds='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
@@ -9555,8 +9919,8 @@
;;
esac
fi
- if test "$with_gnu_ld" = no; then
- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ hardcode_libdir_flag_spec='$wl+b $wl$libdir'
hardcode_libdir_separator=:
case $host_cpu in
@@ -9567,7 +9931,7 @@
*)
hardcode_direct=yes
hardcode_direct_absolute=yes
- export_dynamic_flag_spec='${wl}-E'
+ export_dynamic_flag_spec='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
@@ -9578,8 +9942,8 @@
;;
irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GCC"; then
+ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
# Try to use the -exported_symbol ld option, if it does not
# work, assume that -exports_file does not work either and
# implicitly export all symbols.
@@ -9589,8 +9953,8 @@
if ${lt_cv_irix_exported_symbol+:} false; then :
$as_echo_n "(cached) " >&6
else
- save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ save_LDFLAGS=$LDFLAGS
+ LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
int foo (void) { return 0; }
@@ -9602,24 +9966,34 @@
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_irix_exported_symbol" >&5
$as_echo "$lt_cv_irix_exported_symbol" >&6; }
- if test "$lt_cv_irix_exported_symbol" = yes; then
- archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ if test yes = "$lt_cv_irix_exported_symbol"; then
+ archive_expsym_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
fi
else
- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
fi
archive_cmds_need_lc='no'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
hardcode_libdir_separator=:
inherit_rpath=yes
link_all_deplibs=yes
;;
+ linux*)
+ case $cc_basename in
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ ld_shlibs=yes
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
@@ -9634,7 +10008,7 @@
newsos6)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct=yes
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
hardcode_libdir_separator=:
hardcode_shlibpath_var=no
;;
@@ -9642,27 +10016,19 @@
*nto* | *qnx*)
;;
- openbsd*)
+ openbsd* | bitrig*)
if test -f /usr/libexec/ld.so; then
hardcode_direct=yes
hardcode_shlibpath_var=no
hardcode_direct_absolute=yes
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- export_dynamic_flag_spec='${wl}-E'
+ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+ hardcode_libdir_flag_spec='$wl-rpath,$libdir'
+ export_dynamic_flag_spec='$wl-E'
else
- case $host_os in
- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- hardcode_libdir_flag_spec='-R$libdir'
- ;;
- *)
- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
- ;;
- esac
+ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ hardcode_libdir_flag_spec='$wl-rpath,$libdir'
fi
else
ld_shlibs=no
@@ -9673,33 +10039,53 @@
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
allow_undefined_flag=unsupported
- archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ shrext_cmds=.dll
+ archive_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ archive_expsym_cmds='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ old_archive_From_new_cmds='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ enable_shared_with_static_runtimes=yes
;;
osf3*)
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GCC"; then
+ allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+ archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
else
allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
fi
archive_cmds_need_lc='no'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
hardcode_libdir_separator=:
;;
osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
- archive_cmds='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
+ if test yes = "$GCC"; then
+ allow_undefined_flag=' $wl-expect_unresolved $wl\*'
+ archive_cmds='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ hardcode_libdir_flag_spec='$wl-rpath $wl$libdir'
else
allow_undefined_flag=' -expect_unresolved \*'
- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ archive_cmds='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+ $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
# Both c and cxx compiler support -rpath directly
hardcode_libdir_flag_spec='-rpath $libdir'
@@ -9710,24 +10096,24 @@
solaris*)
no_undefined_flag=' -z defs'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- archive_cmds='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ wlarc='$wl'
+ archive_cmds='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
else
case `$CC -V 2>&1` in
*"Compilers 5.0"*)
wlarc=''
- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ archive_cmds='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
;;
*)
- wlarc='${wl}'
- archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ wlarc='$wl'
+ archive_cmds='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
;;
esac
fi
@@ -9737,11 +10123,11 @@
solaris2.[0-5] | solaris2.[0-5].*) ;;
*)
# The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but understands '-z linker_flag'. GCC discards it without '$wl',
# but is careful enough not to reorder.
# Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ if test yes = "$GCC"; then
+ whole_archive_flag_spec='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
else
whole_archive_flag_spec='-z allextract$convenience -z defaultextract'
fi
@@ -9751,10 +10137,10 @@
;;
sunos4*)
- if test "x$host_vendor" = xsequent; then
+ if test sequent = "$host_vendor"; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
- archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
else
archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
@@ -9803,43 +10189,43 @@
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*)
- no_undefined_flag='${wl}-z,text'
+ no_undefined_flag='$wl-z,text'
archive_cmds_need_lc=no
hardcode_shlibpath_var=no
runpath_var='LD_RUN_PATH'
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
+ # Note: We CANNOT use -z defs as we might desire, because we do not
# link with -lc, and that would cause any symbols used from libc to
# always be unresolved, which means just about no library would
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
- no_undefined_flag='${wl}-z,text'
- allow_undefined_flag='${wl}-z,nodefs'
+ no_undefined_flag='$wl-z,text'
+ allow_undefined_flag='$wl-z,nodefs'
archive_cmds_need_lc=no
hardcode_shlibpath_var=no
- hardcode_libdir_flag_spec='${wl}-R,$libdir'
+ hardcode_libdir_flag_spec='$wl-R,$libdir'
hardcode_libdir_separator=':'
link_all_deplibs=yes
- export_dynamic_flag_spec='${wl}-Bexport'
+ export_dynamic_flag_spec='$wl-Bexport'
runpath_var='LD_RUN_PATH'
- if test "$GCC" = yes; then
- archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ archive_cmds='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_cmds='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ archive_expsym_cmds='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
@@ -9854,10 +10240,10 @@
;;
esac
- if test x$host_vendor = xsni; then
+ if test sni = "$host_vendor"; then
case $host in
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- export_dynamic_flag_spec='${wl}-Blargedynsym'
+ export_dynamic_flag_spec='$wl-Blargedynsym'
;;
esac
fi
@@ -9865,7 +10251,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ld_shlibs" >&5
$as_echo "$ld_shlibs" >&6; }
-test "$ld_shlibs" = no && can_build_shared=no
+test no = "$ld_shlibs" && can_build_shared=no
with_gnu_ld=$with_gnu_ld
@@ -9891,7 +10277,7 @@
# Assume -lc should be added
archive_cmds_need_lc=yes
- if test "$enable_shared" = yes && test "$GCC" = yes; then
+ if test yes,yes = "$GCC,$enable_shared"; then
case $archive_cmds in
*'~'*)
# FIXME: we may have to deal with multi-command sequences.
@@ -10106,14 +10492,14 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking dynamic linker characteristics" >&5
$as_echo_n "checking dynamic linker characteristics... " >&6; }
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
case $host_os in
- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
- *) lt_awk_arg="/^libraries:/" ;;
+ darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
+ *) lt_awk_arg='/^libraries:/' ;;
esac
case $host_os in
- mingw* | cegcc*) lt_sed_strip_eq="s,=\([A-Za-z]:\),\1,g" ;;
- *) lt_sed_strip_eq="s,=/,/,g" ;;
+ mingw* | cegcc*) lt_sed_strip_eq='s|=\([A-Za-z]:\)|\1|g' ;;
+ *) lt_sed_strip_eq='s|=/|/|g' ;;
esac
lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
case $lt_search_path_spec in
@@ -10129,28 +10515,35 @@
;;
esac
# Ok, now we have the path, separated by spaces, we can step through it
- # and add multilib dir if necessary.
+ # and add multilib dir if necessary...
lt_tmp_lt_search_path_spec=
- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ # ...but if some path component already ends with the multilib dir we assume
+ # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
+ case "$lt_multi_os_dir; $lt_search_path_spec " in
+ "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
+ lt_multi_os_dir=
+ ;;
+ esac
for lt_sys_path in $lt_search_path_spec; do
- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
- else
+ if test -d "$lt_sys_path$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
+ elif test -n "$lt_multi_os_dir"; then
test -d "$lt_sys_path" && \
lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
fi
done
lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
-BEGIN {RS=" "; FS="/|\n";} {
- lt_foo="";
- lt_count=0;
+BEGIN {RS = " "; FS = "/|\n";} {
+ lt_foo = "";
+ lt_count = 0;
for (lt_i = NF; lt_i > 0; lt_i--) {
if ($lt_i != "" && $lt_i != ".") {
if ($lt_i == "..") {
lt_count++;
} else {
if (lt_count == 0) {
- lt_foo="/" $lt_i lt_foo;
+ lt_foo = "/" $lt_i lt_foo;
} else {
lt_count--;
}
@@ -10164,7 +10557,7 @@
# for these hosts.
case $host_os in
mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
- $SED 's,/\([A-Za-z]:\),\1,g'` ;;
+ $SED 's|/\([A-Za-z]:\)|\1|g'` ;;
esac
sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
else
@@ -10173,7 +10566,7 @@
library_names_spec=
libname_spec='lib$name'
soname_spec=
-shrext_cmds=".so"
+shrext_cmds=.so
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
@@ -10190,14 +10583,16 @@
# flags to be left without arguments
need_version=unknown
+
+
case $host_os in
aix3*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
shlibpath_var=LIBPATH
# AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
+ soname_spec='$libname$release$shared_ext$major'
;;
aix[4-9]*)
@@ -10205,41 +10600,91 @@
need_lib_prefix=no
need_version=no
hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
else
# With GCC up to 2.95.x, collect2 would create an import file
# for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
+ # the line '#! .'. This would cause the generated library to
+ # depend on '.', always an invalid library. This was fixed in
# development snapshots of GCC prior to 3.0.
case $host_os in
aix4 | aix4.[01] | aix4.[01].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
- echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
:
else
can_build_shared=no
fi
;;
esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # Using Import Files as archive members, it is possible to support
+ # filename-based versioning of shared library archives on AIX. While
+ # this would work for both with and without runtime linking, it will
+ # prevent static linking of such archives. So we do filename-based
+ # shared library versioning with .so extension only, which is used
+ # when both runtime linking and shared linking is enabled.
+ # Unfortunately, runtime linking may impact performance, so we do
+ # not want this to be the default eventually. Also, we use the
+ # versioned .so libs for executables only if there is the -brtl
+ # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+ # To allow for filename-based versioning support, we need to create
+ # libNAME.so.V as an archive file, containing:
+ # *) an Import File, referring to the versioned filename of the
+ # archive as well as the shared archive member, telling the
+ # bitwidth (32 or 64) of that shared object, and providing the
+ # list of exported symbols of that shared object, eventually
+ # decorated with the 'weak' keyword
+ # *) the shared object with the F_LOADONLY flag set, to really avoid
+ # it being seen by the linker.
+ # At run time we better use the real file rather than another symlink,
+ # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+ case $with_aix_soname,$aix_use_runtimelinking in
+ # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
# soname into executable. Probably we can add versioning support to
# collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
+ aix,yes) # traditional libtool
+ dynamic_linker='AIX unversionable lib.so'
# If using run time linking (on AIX 4.2 or later) use lib<name>.so
# instead of lib<name>.a to let people know that these are not
# typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ ;;
+ aix,no) # traditional AIX only
+ dynamic_linker='AIX lib.a(lib.so.V)'
# We preserve .a as extension for shared libraries through AIX4.2
# and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+ svr4,*) # full svr4 only
+ dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o)"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,yes) # both, prefer svr4
+ dynamic_linker="AIX lib.so.V($shared_archive_member_spec.o), lib.a(lib.so.V)"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # unpreferred sharedlib libNAME.a needs extra handling
+ postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+ postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,no) # both, prefer aix
+ dynamic_linker="AIX lib.a(lib.so.V), lib.so.V($shared_archive_member_spec.o)"
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+ postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+ postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+ ;;
+ esac
shlibpath_var=LIBPATH
fi
;;
@@ -10249,18 +10694,18 @@
powerpc)
# Since July 2007 AmigaOS4 officially supports .so libraries.
# When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
;;
m68k)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
;;
esac
;;
beos*)
- library_names_spec='${libname}${shared_ext}'
+ library_names_spec='$libname$shared_ext'
dynamic_linker="$host_os ld.so"
shlibpath_var=LIBRARY_PATH
;;
@@ -10268,8 +10713,8 @@
bsdi[45]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
@@ -10281,7 +10726,7 @@
cygwin* | mingw* | pw32* | cegcc*)
version_type=windows
- shrext_cmds=".dll"
+ shrext_cmds=.dll
need_version=no
need_lib_prefix=no
@@ -10290,8 +10735,8 @@
# gcc
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname~
@@ -10307,17 +10752,17 @@
case $host_os in
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"
;;
mingw* | cegcc*)
# MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
;;
esac
dynamic_linker='Win32 ld.exe'
@@ -10326,8 +10771,8 @@
*,cl*)
# Native MSVC
libname_spec='$name'
- soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
- library_names_spec='${libname}.dll.lib'
+ soname_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext'
+ library_names_spec='$libname.dll.lib'
case $build_os in
mingw*)
@@ -10354,7 +10799,7 @@
sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
;;
*)
- sys_lib_search_path_spec="$LIB"
+ sys_lib_search_path_spec=$LIB
if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then
# It is most probably a Windows format PATH.
sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
@@ -10367,8 +10812,8 @@
esac
# DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname'
@@ -10381,7 +10826,7 @@
*)
# Assume MSVC wrapper
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ library_names_spec='$libname`echo $release | $SED -e 's/[.]/-/g'`$versuffix$shared_ext $libname.lib'
dynamic_linker='Win32 ld.exe'
;;
esac
@@ -10394,8 +10839,8 @@
version_type=darwin
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
+ library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$major$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
@@ -10408,8 +10853,8 @@
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
@@ -10427,12 +10872,13 @@
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
need_version=no
need_lib_prefix=no
;;
freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
need_version=yes
;;
esac
@@ -10457,26 +10903,15 @@
esac
;;
-gnu*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
dynamic_linker="$host_os runtime_loader"
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LIBRARY_PATH
- shlibpath_overrides_runpath=yes
+ shlibpath_overrides_runpath=no
sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
hardcode_into_libs=yes
;;
@@ -10494,14 +10929,15 @@
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ if test 32 = "$HPUX_IA64_MODE"; then
sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux32
else
sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux64
fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
@@ -10509,8 +10945,8 @@
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
@@ -10519,8 +10955,8 @@
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
;;
esac
# HP-UX runs *really* slowly unless shared libraries are mode 555, ...
@@ -10533,8 +10969,8 @@
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
@@ -10545,7 +10981,7 @@
case $host_os in
nonstopux*) version_type=nonstopux ;;
*)
- if test "$lt_cv_prog_gnu_ld" = yes; then
+ if test yes = "$lt_cv_prog_gnu_ld"; then
version_type=linux # correct to gnu/linux during the next big refactor
else
version_type=irix
@@ -10553,8 +10989,8 @@
esac
need_lib_prefix=no
need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
case $host_os in
irix5* | nonstopux*)
libsuff= shlibsuff=
@@ -10573,8 +11009,8 @@
esac
shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+ sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
hardcode_into_libs=yes
;;
@@ -10583,13 +11019,33 @@
dynamic_linker=no
;;
+linux*android*)
+ version_type=none # Android doesn't support versioned libraries.
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext'
+ soname_spec='$libname$release$shared_ext'
+ finish_cmds=
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ dynamic_linker='Android linker'
+ # Don't embed -rpath directories since the linker doesn't support them.
+ hardcode_libdir_flag_spec='-L$libdir'
+ ;;
+
# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
@@ -10633,7 +11089,12 @@
# before this can be enabled.
hardcode_into_libs=yes
- # Append ld.so.conf contents to the search path
+ # Ideally, we could use ldconfig to report *all* directores which are
+ # searched for libraries, however this is still not possible. Aside from not
+ # being certain /sbin/ldconfig is available, command
+ # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+ # even though it is searched at run-time. Try to do the best guess by
+ # appending ld.so.conf contents (and includes) to the search path.
if test -f /etc/ld.so.conf; then
lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
@@ -10653,12 +11114,12 @@
need_lib_prefix=no
need_version=no
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
dynamic_linker='NetBSD ld.elf_so'
fi
shlibpath_var=LD_LIBRARY_PATH
@@ -10668,7 +11129,7 @@
newsos6)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
@@ -10677,58 +11138,68 @@
version_type=qnx
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
dynamic_linker='ldqnx.so'
;;
-openbsd*)
+openbsd* | bitrig*)
version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib
need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+ need_version=no
+ else
+ need_version=yes
+ fi
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[89] | openbsd2.[89].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
+ shlibpath_overrides_runpath=yes
;;
os2*)
libname_spec='$name'
- shrext_cmds=".dll"
+ version_type=windows
+ shrext_cmds=.dll
+ need_version=no
need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
+ # OS/2 can only load a DLL with a base name of 8 characters or less.
+ soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+ v=$($ECHO $release$versuffix | tr -d .-);
+ n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+ $ECHO $n$v`$shared_ext'
+ library_names_spec='${libname}_dll.$libext'
dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
+ shlibpath_var=BEGINLIBPATH
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
;;
osf3* | osf4* | osf5*)
version_type=osf
need_lib_prefix=no
need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
rdos*)
@@ -10739,8 +11210,8 @@
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
@@ -10750,11 +11221,11 @@
sunos4*)
version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
need_lib_prefix=no
fi
need_version=yes
@@ -10762,8 +11233,8 @@
sysv4 | sysv4.3*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
case $host_vendor in
sni)
@@ -10784,24 +11255,24 @@
;;
sysv4*MP*)
- if test -d /usr/nec ;then
+ if test -d /usr/nec; then
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
+ library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+ soname_spec='$libname$shared_ext.$major'
shlibpath_var=LD_LIBRARY_PATH
fi
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
+ version_type=sco
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
else
sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
@@ -10819,7 +11290,7 @@
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
@@ -10827,8 +11298,8 @@
uts4*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
@@ -10838,20 +11309,35 @@
esac
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $dynamic_linker" >&5
$as_echo "$dynamic_linker" >&6; }
-test "$dynamic_linker" = no && can_build_shared=no
+test no = "$dynamic_linker" && can_build_shared=no
variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
- sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+ sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
- sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+ sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
fi
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
+
+
+
+
+
@@ -10948,15 +11434,15 @@
hardcode_action=
if test -n "$hardcode_libdir_flag_spec" ||
test -n "$runpath_var" ||
- test "X$hardcode_automatic" = "Xyes" ; then
+ test yes = "$hardcode_automatic"; then
# We can hardcode non-existent directories.
- if test "$hardcode_direct" != no &&
+ if test no != "$hardcode_direct" &&
# If the only mechanism to avoid hardcoding is shlibpath_var, we
# have to relink, otherwise we might link with an installed library
# when we should be linking with a yet-to-be-installed one
- ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no &&
- test "$hardcode_minus_L" != no; then
+ ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, )" &&
+ test no != "$hardcode_minus_L"; then
# Linking always hardcodes the temporary library directory.
hardcode_action=relink
else
@@ -10971,12 +11457,12 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $hardcode_action" >&5
$as_echo "$hardcode_action" >&6; }
-if test "$hardcode_action" = relink ||
- test "$inherit_rpath" = yes; then
+if test relink = "$hardcode_action" ||
+ test yes = "$inherit_rpath"; then
# Fast installation is not supported
enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
+elif test yes = "$shlibpath_overrides_runpath" ||
+ test no = "$enable_shared"; then
# Fast installation is not necessary
enable_fast_install=needless
fi
@@ -10986,7 +11472,7 @@
- if test "x$enable_dlopen" != xyes; then
+ if test yes != "$enable_dlopen"; then
enable_dlopen=unknown
enable_dlopen_self=unknown
enable_dlopen_self_static=unknown
@@ -10996,23 +11482,23 @@
case $host_os in
beos*)
- lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen=load_add_on
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
;;
mingw* | pw32* | cegcc*)
- lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen=LoadLibrary
lt_cv_dlopen_libs=
;;
cygwin*)
- lt_cv_dlopen="dlopen"
+ lt_cv_dlopen=dlopen
lt_cv_dlopen_libs=
;;
darwin*)
- # if libdl is installed we need to link against it
+ # if libdl is installed we need to link against it
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
$as_echo_n "checking for dlopen in -ldl... " >&6; }
if ${ac_cv_lib_dl_dlopen+:} false; then :
@@ -11050,10 +11536,10 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+ lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
else
- lt_cv_dlopen="dyld"
+ lt_cv_dlopen=dyld
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
@@ -11061,10 +11547,18 @@
;;
+ tpf*)
+ # Don't try to run any link tests for TPF. We know it's impossible
+ # because TPF is a cross-compiler, and we know how we open DSOs.
+ lt_cv_dlopen=dlopen
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=no
+ ;;
+
*)
ac_fn_c_check_func "$LINENO" "shl_load" "ac_cv_func_shl_load"
if test "x$ac_cv_func_shl_load" = xyes; then :
- lt_cv_dlopen="shl_load"
+ lt_cv_dlopen=shl_load
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for shl_load in -ldld" >&5
$as_echo_n "checking for shl_load in -ldld... " >&6; }
@@ -11103,11 +11597,11 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_shl_load" >&5
$as_echo "$ac_cv_lib_dld_shl_load" >&6; }
if test "x$ac_cv_lib_dld_shl_load" = xyes; then :
- lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"
+ lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld
else
ac_fn_c_check_func "$LINENO" "dlopen" "ac_cv_func_dlopen"
if test "x$ac_cv_func_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen"
+ lt_cv_dlopen=dlopen
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -ldl" >&5
$as_echo_n "checking for dlopen in -ldl... " >&6; }
@@ -11146,7 +11640,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dl_dlopen" >&5
$as_echo "$ac_cv_lib_dl_dlopen" >&6; }
if test "x$ac_cv_lib_dl_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
+ lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dlopen in -lsvld" >&5
$as_echo_n "checking for dlopen in -lsvld... " >&6; }
@@ -11185,7 +11679,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_svld_dlopen" >&5
$as_echo "$ac_cv_lib_svld_dlopen" >&6; }
if test "x$ac_cv_lib_svld_dlopen" = xyes; then :
- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
+ lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for dld_link in -ldld" >&5
$as_echo_n "checking for dld_link in -ldld... " >&6; }
@@ -11224,7 +11718,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_dld_dld_link" >&5
$as_echo "$ac_cv_lib_dld_dld_link" >&6; }
if test "x$ac_cv_lib_dld_dld_link" = xyes; then :
- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"
+ lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld
fi
@@ -11245,21 +11739,21 @@
;;
esac
- if test "x$lt_cv_dlopen" != xno; then
- enable_dlopen=yes
- else
+ if test no = "$lt_cv_dlopen"; then
enable_dlopen=no
+ else
+ enable_dlopen=yes
fi
case $lt_cv_dlopen in
dlopen)
- save_CPPFLAGS="$CPPFLAGS"
- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+ save_CPPFLAGS=$CPPFLAGS
+ test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
- save_LIBS="$LIBS"
+ save_LIBS=$LIBS
LIBS="$lt_cv_dlopen_libs $LIBS"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a program can dlopen itself" >&5
@@ -11267,7 +11761,7 @@
if ${lt_cv_dlopen_self+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test "$cross_compiling" = yes; then :
+ if test yes = "$cross_compiling"; then :
lt_cv_dlopen_self=cross
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
@@ -11314,9 +11808,9 @@
# endif
#endif
-/* When -fvisbility=hidden is used, assume the code has been annotated
+/* When -fvisibility=hidden is used, assume the code has been annotated
correspondingly for the symbols needed. */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
int fnord () __attribute__((visibility("default")));
#endif
@@ -11346,7 +11840,7 @@
(eval $ac_link) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
(./conftest; exit; ) >&5 2>/dev/null
lt_status=$?
case x$lt_status in
@@ -11366,14 +11860,14 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $lt_cv_dlopen_self" >&5
$as_echo "$lt_cv_dlopen_self" >&6; }
- if test "x$lt_cv_dlopen_self" = xyes; then
+ if test yes = "$lt_cv_dlopen_self"; then
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether a statically linked program can dlopen itself" >&5
$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; }
if ${lt_cv_dlopen_self_static+:} false; then :
$as_echo_n "(cached) " >&6
else
- if test "$cross_compiling" = yes; then :
+ if test yes = "$cross_compiling"; then :
lt_cv_dlopen_self_static=cross
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
@@ -11420,9 +11914,9 @@
# endif
#endif
-/* When -fvisbility=hidden is used, assume the code has been annotated
+/* When -fvisibility=hidden is used, assume the code has been annotated
correspondingly for the symbols needed. */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
int fnord () __attribute__((visibility("default")));
#endif
@@ -11452,7 +11946,7 @@
(eval $ac_link) 2>&5
ac_status=$?
$as_echo "$as_me:${as_lineno-$LINENO}: \$? = $ac_status" >&5
- test $ac_status = 0; } && test -s conftest${ac_exeext} 2>/dev/null; then
+ test $ac_status = 0; } && test -s "conftest$ac_exeext" 2>/dev/null; then
(./conftest; exit; ) >&5 2>/dev/null
lt_status=$?
case x$lt_status in
@@ -11473,9 +11967,9 @@
$as_echo "$lt_cv_dlopen_self_static" >&6; }
fi
- CPPFLAGS="$save_CPPFLAGS"
- LDFLAGS="$save_LDFLAGS"
- LIBS="$save_LIBS"
+ CPPFLAGS=$save_CPPFLAGS
+ LDFLAGS=$save_LDFLAGS
+ LIBS=$save_LIBS
;;
esac
@@ -11519,7 +12013,7 @@
# FIXME - insert some real tests, host_os isn't really good enough
case $host_os in
darwin*)
- if test -n "$STRIP" ; then
+ if test -n "$STRIP"; then
striplib="$STRIP -x"
old_striplib="$STRIP -S"
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
@@ -11547,7 +12041,7 @@
- # Report which library types will actually be built
+ # Report what library types will actually be built
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if libtool supports shared libraries" >&5
$as_echo_n "checking if libtool supports shared libraries... " >&6; }
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $can_build_shared" >&5
@@ -11555,13 +12049,13 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build shared libraries" >&5
$as_echo_n "checking whether to build shared libraries... " >&6; }
- test "$can_build_shared" = "no" && enable_shared=no
+ test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
- test "$enable_shared" = yes && enable_static=no
+ test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
@@ -11569,8 +12063,12 @@
;;
aix[4-9]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
fi
;;
esac
@@ -11580,7 +12078,7 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to build static libraries" >&5
$as_echo_n "checking whether to build static libraries... " >&6; }
# Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
+ test yes = "$enable_shared" || enable_static=yes
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $enable_static" >&5
$as_echo "$enable_static" >&6; }
@@ -11594,7 +12092,7 @@
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
-CC="$lt_save_CC"
+CC=$lt_save_CC
@@ -11620,7 +12118,7 @@
# libtool -version-info
-LT_VERSION=0:47:0
+LT_VERSION=0:60:0
# Check whether --enable-silent-rules was given.
@@ -11950,14 +12448,13 @@
-
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -ltinfo" >&5
-$as_echo_n "checking for tgetent in -ltinfo... " >&6; }
-if ${ac_cv_lib_tinfo_tgetent+:} false; then :
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -lncurses" >&5
+$as_echo_n "checking for tgetent in -lncurses... " >&6; }
+if ${ac_cv_lib_ncurses_tgetent+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
-LIBS="-ltinfo $LIBS"
+LIBS="-lncurses $LIBS"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
@@ -11977,154 +12474,22 @@
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_tinfo_tgetent=yes
+ ac_cv_lib_ncurses_tgetent=yes
else
- ac_cv_lib_tinfo_tgetent=no
+ ac_cv_lib_ncurses_tgetent=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_tinfo_tgetent" >&5
-$as_echo "$ac_cv_lib_tinfo_tgetent" >&6; }
-if test "x$ac_cv_lib_tinfo_tgetent" = xyes; then :
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ncurses_tgetent" >&5
+$as_echo "$ac_cv_lib_ncurses_tgetent" >&6; }
+if test "x$ac_cv_lib_ncurses_tgetent" = xyes; then :
cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBTINFO 1
+#define HAVE_LIBNCURSES 1
_ACEOF
- LIBS="-ltinfo $LIBS"
-
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -lterminfo" >&5
-$as_echo_n "checking for tgetent in -lterminfo... " >&6; }
-if ${ac_cv_lib_terminfo_tgetent+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lterminfo $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char tgetent ();
-int
-main ()
-{
-return tgetent ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_terminfo_tgetent=yes
-else
- ac_cv_lib_terminfo_tgetent=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_terminfo_tgetent" >&5
-$as_echo "$ac_cv_lib_terminfo_tgetent" >&6; }
-if test "x$ac_cv_lib_terminfo_tgetent" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBTERMINFO 1
-_ACEOF
-
- LIBS="-lterminfo $LIBS"
-
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -ltermcap" >&5
-$as_echo_n "checking for tgetent in -ltermcap... " >&6; }
-if ${ac_cv_lib_termcap_tgetent+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ltermcap $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char tgetent ();
-int
-main ()
-{
-return tgetent ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_termcap_tgetent=yes
-else
- ac_cv_lib_termcap_tgetent=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_termcap_tgetent" >&5
-$as_echo "$ac_cv_lib_termcap_tgetent" >&6; }
-if test "x$ac_cv_lib_termcap_tgetent" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBTERMCAP 1
-_ACEOF
-
- LIBS="-ltermcap $LIBS"
-
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -ltermlib" >&5
-$as_echo_n "checking for tgetent in -ltermlib... " >&6; }
-if ${ac_cv_lib_termlib_tgetent+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ltermlib $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h. */
-
-/* Override any GCC internal prototype to avoid an error.
- Use char because int might match the return type of a GCC
- builtin and then its argument prototype would still apply. */
-#ifdef __cplusplus
-extern "C"
-#endif
-char tgetent ();
-int
-main ()
-{
-return tgetent ();
- ;
- return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_termlib_tgetent=yes
-else
- ac_cv_lib_termlib_tgetent=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
- conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_termlib_tgetent" >&5
-$as_echo "$ac_cv_lib_termlib_tgetent" >&6; }
-if test "x$ac_cv_lib_termlib_tgetent" = xyes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBTERMLIB 1
-_ACEOF
-
- LIBS="-ltermlib $LIBS"
+ LIBS="-lncurses $LIBS"
else
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -lcurses" >&5
@@ -12171,13 +12536,13 @@
LIBS="-lcurses $LIBS"
else
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -lncurses" >&5
-$as_echo_n "checking for tgetent in -lncurses... " >&6; }
-if ${ac_cv_lib_ncurses_tgetent+:} false; then :
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for tgetent in -ltermcap" >&5
+$as_echo_n "checking for tgetent in -ltermcap... " >&6; }
+if ${ac_cv_lib_termcap_tgetent+:} false; then :
$as_echo_n "(cached) " >&6
else
ac_check_lib_save_LIBS=$LIBS
-LIBS="-lncurses $LIBS"
+LIBS="-ltermcap $LIBS"
cat confdefs.h - <<_ACEOF >conftest.$ac_ext
/* end confdefs.h. */
@@ -12197,25 +12562,25 @@
}
_ACEOF
if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_lib_ncurses_tgetent=yes
+ ac_cv_lib_termcap_tgetent=yes
else
- ac_cv_lib_ncurses_tgetent=no
+ ac_cv_lib_termcap_tgetent=no
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ncurses_tgetent" >&5
-$as_echo "$ac_cv_lib_ncurses_tgetent" >&6; }
-if test "x$ac_cv_lib_ncurses_tgetent" = xyes; then :
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_termcap_tgetent" >&5
+$as_echo "$ac_cv_lib_termcap_tgetent" >&6; }
+if test "x$ac_cv_lib_termcap_tgetent" = xyes; then :
cat >>confdefs.h <<_ACEOF
-#define HAVE_LIBNCURSES 1
+#define HAVE_LIBTERMCAP 1
_ACEOF
- LIBS="-lncurses $LIBS"
+ LIBS="-ltermcap $LIBS"
else
- as_fn_error $? "libcurses or libncurses are required!" "$LINENO" 5
+ as_fn_error $? "libncurses, libcurses, or libtermcap is required!" "$LINENO" 5
fi
@@ -12226,17 +12591,7 @@
fi
-fi
-
-
-fi
-
-
-fi
-
-
-
-### use option --enable-widec to turn on use of wide-character support
+### deprecate option --enable-widec to turn on use of wide-character support
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking if you want wide-character code" >&5
$as_echo_n "checking if you want wide-character code... " >&6; }
@@ -12249,20 +12604,27 @@
{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $with_widec" >&5
$as_echo "$with_widec" >&6; }
- if test "$with_widec" = yes ; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: --enable-widec is deprecated, wide-character/UTF-8 is always enabled" >&5
+$as_echo "$as_me: WARNING: --enable-widec is deprecated, wide-character/UTF-8 is always enabled" >&2;}
-$as_echo "#define WIDECHAR 1" >>confdefs.h
- fi
- if test "$with_widec" = yes; then
- WIDECHAR_TRUE=
- WIDECHAR_FALSE='#'
+# Check whether --enable-examples was given.
+if test "${enable_examples+set}" = set; then :
+ enableval=$enable_examples; enable_examples="$enableval"
else
- WIDECHAR_TRUE='#'
- WIDECHAR_FALSE=
+ enable_examples="yes"
+
fi
+ if test "$enable_examples" = "yes"; then
+ ENABLE_EXAMPLES_TRUE=
+ ENABLE_EXAMPLES_FALSE='#'
+else
+ ENABLE_EXAMPLES_TRUE='#'
+ ENABLE_EXAMPLES_FALSE=
+fi
+
# Checks for header files.
ac_header_dirent=no
@@ -12590,6 +12952,29 @@
done
+ac_fn_c_check_header_mongrel "$LINENO" "ncurses.h" "ac_cv_header_ncurses_h" "$ac_includes_default"
+if test "x$ac_cv_header_ncurses_h" = xyes; then :
+
+else
+ ac_fn_c_check_header_mongrel "$LINENO" "curses.h" "ac_cv_header_curses_h" "$ac_includes_default"
+if test "x$ac_cv_header_curses_h" = xyes; then :
+
+else
+ ac_fn_c_check_header_mongrel "$LINENO" "termcap.h" "ac_cv_header_termcap_h" "$ac_includes_default"
+if test "x$ac_cv_header_termcap_h" = xyes; then :
+
+else
+ as_fn_error $? "ncurses.h, curses.h, or termcap.h is required!" "$LINENO" 5
+fi
+
+
+fi
+
+
+fi
+
+
+
ac_fn_c_check_header_mongrel "$LINENO" "termios.h" "ac_cv_header_termios_h" "$ac_includes_default"
if test "x$ac_cv_header_termios_h" = xyes; then :
@@ -13191,7 +13576,7 @@
fi
-for ac_func in endpwent isascii memchr memset re_comp regcomp strcasecmp strchr strcspn strdup strerror strrchr strstr strtol issetugid wcsdup strlcpy strlcat fgetln vis strvis strunvis __secure_getenv secure_getenv
+for ac_func in endpwent isascii memchr memset re_comp regcomp strcasecmp strchr strcspn strdup strerror strrchr strstr strtol issetugid wcsdup strlcpy strlcat getline vis strvis strunvis __secure_getenv secure_getenv
do :
as_ac_var=`$as_echo "ac_cv_func_$ac_func" | $as_tr_sh`
ac_fn_c_check_func "$LINENO" "$ac_func" "$as_ac_var"
@@ -13478,8 +13863,8 @@
am__EXEEXT_FALSE=
fi
-if test -z "${WIDECHAR_TRUE}" && test -z "${WIDECHAR_FALSE}"; then
- as_fn_error $? "conditional \"WIDECHAR\" was never defined.
+if test -z "${ENABLE_EXAMPLES_TRUE}" && test -z "${ENABLE_EXAMPLES_FALSE}"; then
+ as_fn_error $? "conditional \"ENABLE_EXAMPLES\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
if test -z "${HAVE_STRLCPY_TRUE}" && test -z "${HAVE_STRLCPY_FALSE}"; then
@@ -14080,7 +14465,7 @@
#
# INIT-COMMANDS
#
-AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
+AMDEP_TRUE="$AMDEP_TRUE" MAKE="${MAKE-make}"
# The HP-UX ksh and POSIX shell print the target directory to stdout
@@ -14096,6 +14481,7 @@
enable_static='`$ECHO "$enable_static" | $SED "$delay_single_quote_subst"`'
pic_mode='`$ECHO "$pic_mode" | $SED "$delay_single_quote_subst"`'
enable_fast_install='`$ECHO "$enable_fast_install" | $SED "$delay_single_quote_subst"`'
+shared_archive_member_spec='`$ECHO "$shared_archive_member_spec" | $SED "$delay_single_quote_subst"`'
SHELL='`$ECHO "$SHELL" | $SED "$delay_single_quote_subst"`'
ECHO='`$ECHO "$ECHO" | $SED "$delay_single_quote_subst"`'
PATH_SEPARATOR='`$ECHO "$PATH_SEPARATOR" | $SED "$delay_single_quote_subst"`'
@@ -14145,10 +14531,13 @@
GCC='`$ECHO "$GCC" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_pipe='`$ECHO "$lt_cv_sys_global_symbol_pipe" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_to_cdecl='`$ECHO "$lt_cv_sys_global_symbol_to_cdecl" | $SED "$delay_single_quote_subst"`'
+lt_cv_sys_global_symbol_to_import='`$ECHO "$lt_cv_sys_global_symbol_to_import" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address" | $SED "$delay_single_quote_subst"`'
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $SED "$delay_single_quote_subst"`'
+lt_cv_nm_interface='`$ECHO "$lt_cv_nm_interface" | $SED "$delay_single_quote_subst"`'
nm_file_list_spec='`$ECHO "$nm_file_list_spec" | $SED "$delay_single_quote_subst"`'
lt_sysroot='`$ECHO "$lt_sysroot" | $SED "$delay_single_quote_subst"`'
+lt_cv_truncate_bin='`$ECHO "$lt_cv_truncate_bin" | $SED "$delay_single_quote_subst"`'
objdir='`$ECHO "$objdir" | $SED "$delay_single_quote_subst"`'
MAGIC_CMD='`$ECHO "$MAGIC_CMD" | $SED "$delay_single_quote_subst"`'
lt_prog_compiler_no_builtin_flag='`$ECHO "$lt_prog_compiler_no_builtin_flag" | $SED "$delay_single_quote_subst"`'
@@ -14213,7 +14602,8 @@
finish_eval='`$ECHO "$finish_eval" | $SED "$delay_single_quote_subst"`'
hardcode_into_libs='`$ECHO "$hardcode_into_libs" | $SED "$delay_single_quote_subst"`'
sys_lib_search_path_spec='`$ECHO "$sys_lib_search_path_spec" | $SED "$delay_single_quote_subst"`'
-sys_lib_dlsearch_path_spec='`$ECHO "$sys_lib_dlsearch_path_spec" | $SED "$delay_single_quote_subst"`'
+configure_time_dlsearch_path='`$ECHO "$configure_time_dlsearch_path" | $SED "$delay_single_quote_subst"`'
+configure_time_lt_sys_library_path='`$ECHO "$configure_time_lt_sys_library_path" | $SED "$delay_single_quote_subst"`'
hardcode_action='`$ECHO "$hardcode_action" | $SED "$delay_single_quote_subst"`'
enable_dlopen='`$ECHO "$enable_dlopen" | $SED "$delay_single_quote_subst"`'
enable_dlopen_self='`$ECHO "$enable_dlopen_self" | $SED "$delay_single_quote_subst"`'
@@ -14264,9 +14654,12 @@
compiler \
lt_cv_sys_global_symbol_pipe \
lt_cv_sys_global_symbol_to_cdecl \
+lt_cv_sys_global_symbol_to_import \
lt_cv_sys_global_symbol_to_c_name_address \
lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \
+lt_cv_nm_interface \
nm_file_list_spec \
+lt_cv_truncate_bin \
lt_prog_compiler_no_builtin_flag \
lt_prog_compiler_pic \
lt_prog_compiler_wl \
@@ -14301,7 +14694,7 @@
striplib; do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[\\\\\\\`\\"\\\$]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -14328,10 +14721,11 @@
postuninstall_cmds \
finish_cmds \
sys_lib_search_path_spec \
-sys_lib_dlsearch_path_spec; do
+configure_time_dlsearch_path \
+configure_time_lt_sys_library_path; do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[\\\\\\\`\\"\\\$]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -14340,19 +14734,16 @@
done
ac_aux_dir='$ac_aux_dir'
-xsi_shell='$xsi_shell'
-lt_shell_append='$lt_shell_append'
-# See if we are running on zsh, and set the options which allow our
+# See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
+if test -n "\${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
PACKAGE='$PACKAGE'
VERSION='$VERSION'
- TIMESTAMP='$TIMESTAMP'
RM='$RM'
ofile='$ofile'
@@ -14974,29 +15365,35 @@
# Older Autoconf quotes --file arguments for eval, but not when files
# are listed without --file. Let's play safe and only enable the eval
# if we detect the quoting.
- case $CONFIG_FILES in
- *\'*) eval set x "$CONFIG_FILES" ;;
- *) set x $CONFIG_FILES ;;
- esac
+ # TODO: see whether this extra hack can be removed once we start
+ # requiring Autoconf 2.70 or later.
+ case $CONFIG_FILES in #(
+ *\'*) :
+ eval set x "$CONFIG_FILES" ;; #(
+ *) :
+ set x $CONFIG_FILES ;; #(
+ *) :
+ ;;
+esac
shift
- for mf
+ # Used to flag and report bootstrapping failures.
+ am_rc=0
+ for am_mf
do
# Strip MF so we end up with the name of the file.
- mf=`echo "$mf" | sed -e 's/:.*$//'`
- # Check whether this is an Automake generated Makefile or not.
- # We used to match only the files named 'Makefile.in', but
- # some people rename them; so instead we look at the file content.
- # Grep'ing the first line is not enough: some people post-process
- # each Makefile.in and add a new line on top of each file to say so.
- # Grep'ing the whole file is not good either: AIX grep has a line
+ am_mf=`$as_echo "$am_mf" | sed -e 's/:.*$//'`
+ # Check whether this is an Automake generated Makefile which includes
+ # dependency-tracking related rules and includes.
+ # Grep'ing the whole file directly is not great: AIX grep has a line
# limit of 2048, but all sed's we know have understand at least 4000.
- if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
- dirpart=`$as_dirname -- "$mf" ||
-$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$mf" : 'X\(//\)[^/]' \| \
- X"$mf" : 'X\(//\)$' \| \
- X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$mf" |
+ sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \
+ || continue
+ am_dirpart=`$as_dirname -- "$am_mf" ||
+$as_expr X"$am_mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+ X"$am_mf" : 'X\(//\)[^/]' \| \
+ X"$am_mf" : 'X\(//\)$' \| \
+ X"$am_mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X"$am_mf" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
@@ -15014,106 +15411,99 @@
q
}
s/.*/./; q'`
- else
- continue
- fi
- # Extract the definition of DEPDIR, am__include, and am__quote
- # from the Makefile without running 'make'.
- DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
- test -z "$DEPDIR" && continue
- am__include=`sed -n 's/^am__include = //p' < "$mf"`
- test -z "$am__include" && continue
- am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
- # Find all dependency output files, they are included files with
- # $(DEPDIR) in their names. We invoke sed twice because it is the
- # simplest approach to changing $(DEPDIR) to its actual value in the
- # expansion.
- for file in `sed -n "
- s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
- sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
- # Make sure the directory exists.
- test -f "$dirpart/$file" && continue
- fdir=`$as_dirname -- "$file" ||
-$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$file" : 'X\(//\)[^/]' \| \
- X"$file" : 'X\(//\)$' \| \
- X"$file" : 'X\(/\)' \| . 2>/dev/null ||
-$as_echo X"$file" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+ am_filepart=`$as_basename -- "$am_mf" ||
+$as_expr X/"$am_mf" : '.*/\([^/][^/]*\)/*$' \| \
+ X"$am_mf" : 'X\(//\)$' \| \
+ X"$am_mf" : 'X\(/\)' \| . 2>/dev/null ||
+$as_echo X/"$am_mf" |
+ sed '/^.*\/\([^/][^/]*\)\/*$/{
s//\1/
q
}
- /^X\(\/\/\)[^/].*/{
+ /^X\/\(\/\/\)$/{
s//\1/
q
}
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
+ /^X\/\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
- as_dir=$dirpart/$fdir; as_fn_mkdir_p
- # echo "creating $dirpart/$file"
- echo '# dummy' > "$dirpart/$file"
- done
+ { echo "$as_me:$LINENO: cd "$am_dirpart" \
+ && sed -e '/# am--include-marker/d' "$am_filepart" \
+ | $MAKE -f - am--depfiles" >&5
+ (cd "$am_dirpart" \
+ && sed -e '/# am--include-marker/d' "$am_filepart" \
+ | $MAKE -f - am--depfiles) >&5 2>&5
+ ac_status=$?
+ echo "$as_me:$LINENO: \$? = $ac_status" >&5
+ (exit $ac_status); } || am_rc=$?
done
+ if test $am_rc -ne 0; then
+ { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
+$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
+as_fn_error $? "Something went wrong bootstrapping makefile fragments
+ for automatic dependency tracking. Try re-running configure with the
+ '--disable-dependency-tracking' option to at least be able to build
+ the package (albeit without support for automatic dependency tracking).
+See \`config.log' for more details" "$LINENO" 5; }
+ fi
+ { am_dirpart=; unset am_dirpart;}
+ { am_filepart=; unset am_filepart;}
+ { am_mf=; unset am_mf;}
+ { am_rc=; unset am_rc;}
+ rm -f conftest-deps.mk
}
;;
"libtool":C)
- # See if we are running on zsh, and set the options which allow our
+ # See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
+ if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
- cfgfile="${ofile}T"
+ cfgfile=${ofile}T
trap "$RM \"$cfgfile\"; exit 1" 1 2 15
$RM "$cfgfile"
cat <<_LT_EOF >> "$cfgfile"
#! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Generated automatically by $as_me ($PACKAGE) $VERSION
# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# Written by Gordon Matzigkeit, 1996
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the same
+# distribution terms that you use for the rest of that program.
#
-# This file is part of GNU Libtool.
-#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING. If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
# The names of the tagged configurations supported by this script.
-available_tags=""
+available_tags=''
+
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
# ### BEGIN LIBTOOL CONFIG
@@ -15133,6 +15523,9 @@
# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install
+# Shared archive member basename,for filename based shared library versioning on AIX.
+shared_archive_member_spec=$shared_archive_member_spec
+
# Shell to use when invoking shell scripts.
SHELL=$lt_SHELL
@@ -15250,18 +15643,27 @@
# Transform the output of nm in a proper C declaration.
global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
+# Transform the output of nm into a list of symbols to manually relocate.
+global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import
+
# Transform the output of nm in a C name address pair.
global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
# Transform the output of nm in a C name address pair when lib prefix is needed.
global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix
+# The name lister interface.
+nm_interface=$lt_lt_cv_nm_interface
+
# Specify filename containing input files for \$NM.
nm_file_list_spec=$lt_nm_file_list_spec
-# The root where to search for dependent libraries,and in which our libraries should be installed.
+# The root where to search for dependent libraries,and where our libraries should be installed.
lt_sysroot=$lt_sysroot
+# Command to truncate a binary pipe.
+lt_truncate_bin=$lt_lt_cv_truncate_bin
+
# The name of the directory that contains temporary libtool files.
objdir=$objdir
@@ -15352,8 +15754,11 @@
# Compile-time system search path for libraries.
sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
-# Run-time system search path for libraries.
-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
+# Detected run-time system search path for libraries.
+sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path
+
+# Explicit LT_SYS_LIBRARY_PATH set during ./configure time.
+configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path
# Whether dlopen is supported.
dlopen_support=$enable_dlopen
@@ -15446,13 +15851,13 @@
# Whether we need a single "-rpath" flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary.
hardcode_direct=$hardcode_direct
-# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes
+# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary and the resulting library dependency is
-# "absolute",i.e impossible to change by setting \${shlibpath_var} if the
+# "absolute",i.e impossible to change by setting \$shlibpath_var if the
# library is relocated.
hardcode_direct_absolute=$hardcode_direct_absolute
@@ -15504,13 +15909,72 @@
_LT_EOF
+ cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+# string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+# string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+# "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+# VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+ case x$2 in
+ x)
+ ;;
+ *:)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
+ ;;
+ x:*)
+ eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ *::*)
+ eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+ eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
+ ;;
+ *)
+ eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
+ ;;
+ esac
+}
+
+
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+ for cc_temp in $*""; do
+ case $cc_temp in
+ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
+ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+ done
+ func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_EOF
+
case $host_os in
aix3*)
cat <<\_LT_EOF >> "$cfgfile"
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
+if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
@@ -15519,7 +15983,7 @@
esac
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
# We use sed instead of cat because bash on DJGPP gets confused if
@@ -15529,165 +15993,6 @@
sed '$q' "$ltmain" >> "$cfgfile" \
|| (rm -f "$cfgfile"; exit 1)
- if test x"$xsi_shell" = xyes; then
- sed -e '/^func_dirname ()$/,/^} # func_dirname /c\
-func_dirname ()\
-{\
-\ case ${1} in\
-\ */*) func_dirname_result="${1%/*}${2}" ;;\
-\ * ) func_dirname_result="${3}" ;;\
-\ esac\
-} # Extended-shell func_dirname implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_basename ()$/,/^} # func_basename /c\
-func_basename ()\
-{\
-\ func_basename_result="${1##*/}"\
-} # Extended-shell func_basename implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_dirname_and_basename ()$/,/^} # func_dirname_and_basename /c\
-func_dirname_and_basename ()\
-{\
-\ case ${1} in\
-\ */*) func_dirname_result="${1%/*}${2}" ;;\
-\ * ) func_dirname_result="${3}" ;;\
-\ esac\
-\ func_basename_result="${1##*/}"\
-} # Extended-shell func_dirname_and_basename implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_stripname ()$/,/^} # func_stripname /c\
-func_stripname ()\
-{\
-\ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are\
-\ # positional parameters, so assign one to ordinary parameter first.\
-\ func_stripname_result=${3}\
-\ func_stripname_result=${func_stripname_result#"${1}"}\
-\ func_stripname_result=${func_stripname_result%"${2}"}\
-} # Extended-shell func_stripname implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_split_long_opt ()$/,/^} # func_split_long_opt /c\
-func_split_long_opt ()\
-{\
-\ func_split_long_opt_name=${1%%=*}\
-\ func_split_long_opt_arg=${1#*=}\
-} # Extended-shell func_split_long_opt implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_split_short_opt ()$/,/^} # func_split_short_opt /c\
-func_split_short_opt ()\
-{\
-\ func_split_short_opt_arg=${1#??}\
-\ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}\
-} # Extended-shell func_split_short_opt implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_lo2o ()$/,/^} # func_lo2o /c\
-func_lo2o ()\
-{\
-\ case ${1} in\
-\ *.lo) func_lo2o_result=${1%.lo}.${objext} ;;\
-\ *) func_lo2o_result=${1} ;;\
-\ esac\
-} # Extended-shell func_lo2o implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_xform ()$/,/^} # func_xform /c\
-func_xform ()\
-{\
- func_xform_result=${1%.*}.lo\
-} # Extended-shell func_xform implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_arith ()$/,/^} # func_arith /c\
-func_arith ()\
-{\
- func_arith_result=$(( $* ))\
-} # Extended-shell func_arith implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_len ()$/,/^} # func_len /c\
-func_len ()\
-{\
- func_len_result=${#1}\
-} # Extended-shell func_len implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-fi
-
-if test x"$lt_shell_append" = xyes; then
- sed -e '/^func_append ()$/,/^} # func_append /c\
-func_append ()\
-{\
- eval "${1}+=\\${2}"\
-} # Extended-shell func_append implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- sed -e '/^func_append_quoted ()$/,/^} # func_append_quoted /c\
-func_append_quoted ()\
-{\
-\ func_quote_for_eval "${2}"\
-\ eval "${1}+=\\\\ \\$func_quote_for_eval_result"\
-} # Extended-shell func_append_quoted implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-
-
- # Save a `func_append' function call where possible by direct use of '+='
- sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
- test 0 -eq $? || _lt_function_replace_fail=:
-else
- # Save a `func_append' function call even when '+=' is not available
- sed -e 's%func_append \([a-zA-Z_]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
- test 0 -eq $? || _lt_function_replace_fail=:
-fi
-
-if test x"$_lt_function_replace_fail" = x":"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: Unable to substitute extended shell functions in $ofile" >&5
-$as_echo "$as_me: WARNING: Unable to substitute extended shell functions in $ofile" >&2;}
-fi
-
-
mv -f "$cfgfile" "$ofile" ||
(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
chmod +x "$ofile"
diff --git a/configure.ac b/configure.ac
index 5e33526..b795a0e 100644
--- a/configure.ac
+++ b/configure.ac
@@ -35,7 +35,7 @@
AC_PROG_LIBTOOL
# libtool -version-info
-AC_SUBST(LT_VERSION, [0:47:0])
+AC_SUBST(LT_VERSION, [0:60:0])
m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
@@ -46,24 +46,25 @@
AC_PROG_AWK
EL_MANTYPE
-
-AC_CHECK_LIB(tinfo, tgetent,,
- [AC_CHECK_LIB(terminfo, tgetent,,
+AC_CHECK_LIB(ncurses, tgetent,,
+ [AC_CHECK_LIB(curses, tgetent,,
[AC_CHECK_LIB(termcap, tgetent,,
- [AC_CHECK_LIB(termlib, tgetent,,
- [AC_CHECK_LIB(curses, tgetent,,
- [AC_CHECK_LIB(ncurses, tgetent,,
- [AC_MSG_ERROR([libcurses or libncurses are required!])]
- )]
- )]
- )]
+ [AC_MSG_ERROR([libncurses, libcurses, or libtermcap is required!])]
)]
)]
)
+### deprecate option --enable-widec to turn on use of wide-character support
+EL_DEPRECATE_WIDEC
-### use option --enable-widec to turn on use of wide-character support
-EL_ENABLE_WIDEC
+AC_ARG_ENABLE(
+ [examples],
+ [AS_HELP_STRING([--enable-examples], [build the example programs [default=yes]])],
+ [enable_examples="$enableval"],
+ [enable_examples="yes"]
+)
+
+AM_CONDITIONAL(ENABLE_EXAMPLES, [test "$enable_examples" = "yes"])
# Checks for header files.
AC_HEADER_DIRENT
@@ -71,7 +72,15 @@
AC_HEADER_SYS_WAIT
AC_CHECK_HEADERS([fcntl.h limits.h malloc.h stdlib.h string.h sys/ioctl.h sys/param.h unistd.h curses.h ncurses.h sys/cdefs.h termcap.h])
-AC_CHECK_HEADER([termios.h], [], [AC_MSG_ERROR([termios.h is required!])],[])
+AC_CHECK_HEADER([ncurses.h], [],
+ [AC_CHECK_HEADER([curses.h], [],
+ [AC_CHECK_HEADER([termcap.h], [],
+ [AC_MSG_ERROR([ncurses.h, curses.h, or termcap.h is required!])],
+ [])],
+ [])],
+[])
+
+AC_CHECK_HEADER([termios.h], [], [AC_MSG_ERROR([termios.h is required!])], [])
## include curses.h to prevent "Present But Cannot Be Compiled"
AC_CHECK_HEADERS([term.h],,,
@@ -108,7 +117,7 @@
#AC_FUNC_REALLOC
AC_TYPE_SIGNAL
AC_FUNC_STAT
-AC_CHECK_FUNCS([endpwent isascii memchr memset re_comp regcomp strcasecmp strchr strcspn strdup strerror strrchr strstr strtol issetugid wcsdup strlcpy strlcat fgetln vis strvis strunvis __secure_getenv secure_getenv])
+AC_CHECK_FUNCS([endpwent isascii memchr memset re_comp regcomp strcasecmp strchr strcspn strdup strerror strrchr strstr strtol issetugid wcsdup strlcpy strlcat getline vis strvis strunvis __secure_getenv secure_getenv])
# strlcpy
AC_CHECK_FUNC(strlcpy, found_strlcpy=yes, found_strlcpy=no)
diff --git a/depcomp b/depcomp
index 4ebd5b3..65cbf70 100755
--- a/depcomp
+++ b/depcomp
@@ -1,9 +1,9 @@
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
-scriptversion=2013-05-30.07; # UTC
+scriptversion=2018-03-07.03; # UTC
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2018 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -16,7 +16,7 @@
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
+# along with this program. If not, see <https://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -783,9 +783,9 @@
# Local Variables:
# mode: shell-script
# sh-indentation: 2
-# eval: (add-hook 'write-file-hooks 'time-stamp)
+# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
+# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
diff --git a/doc/Makefile.am b/doc/Makefile.am
index dfdf841..0e58949 100644
--- a/doc/Makefile.am
+++ b/doc/Makefile.am
@@ -1,13 +1,53 @@
-EL_MANS = editline.3 editrc.5
+EL_MANS = editline.3 editline.7 editrc.5
man_MANS = $(EL_MANS)
-EL_MAN_LINKS = el_init.3 el_end.3 el_reset.3 el_gets.3 el_getc.3 \
- el_push.3 el_parse.3 el_set.3 el_get.3 el_source.3 \
- el_resize.3 el_line.3 el_insertstr.3 el_deletestr.3 \
- el_history_init.3 el_history_end.3 el_history.3 el_tok_init.3 \
- el_tok_end.3 el_tok_reset.3 el_tok_line.3 el_tok_str.3
+
+EL_MAN_LINKS = \
+ el_deletestr.3 \
+ el_end.3 \
+ el_get.3 \
+ el_getc.3 \
+ el_gets.3 \
+ el_init.3 \
+ el_init_fd.3 \
+ el_insertstr.3 \
+ el_line.3 \
+ el_parse.3 \
+ el_push.3 \
+ el_reset.3 \
+ el_resize.3 \
+ el_set.3 \
+ el_source.3 \
+ history.3 \
+ history_end.3 \
+ history_init.3 \
+ tok_end.3 \
+ tok_init.3 \
+ tok_line.3 \
+ tok_reset.3 \
+ tok_str.3
+
+EL_MAN_LINKS += \
+ el_wdeletestr.3 \
+ el_wget.3 \
+ el_wgetc.3 \
+ el_wgets.3 \
+ el_winsertstr.3 \
+ el_wline.3 \
+ el_wparse.3 \
+ el_wpush.3 \
+ el_wset.3 \
+ history_w.3 \
+ history_wend.3 \
+ history_winit.3 \
+ tok_wend.3 \
+ tok_winit.3 \
+ tok_wline.3 \
+ tok_wreset.3 \
+ tok_wstr.3
+
install-data-hook: $(EL_MAN_LINKS)
@@ -16,16 +56,16 @@
$(EL_MANS):
@if test "$(MANTYPE)" = "mdoc"; then\
- cp $(srcdir)/$@.roff $@;\
- else\
- $(AWK) -f $(srcdir)/mdoc2man.awk $(srcdir)/$@.roff > $@ || rm -f $@;\
- fi;
+ cp $(srcdir)/$@.roff $@;\
+ else\
+ $(AWK) -f $(srcdir)/mdoc2man.awk $(srcdir)/$@.roff > $@ || rm -f $@;\
+ fi;
-uninstall-local:
+uninstall-local:
(cd $(DESTDIR)$(man3dir) && rm -f $(EL_MAN_LINKS))
CLEANFILES = $(EL_MANS)
-EXTRA_DIST = editline.3.roff editrc.5.roff mdoc2man.awk
+EXTRA_DIST = editline.3.roff editline.7.roff editrc.5.roff mdoc2man.awk
changelog.txt: ../ChangeLog
@sed 's/@/ (at)/g; s/&/\&/g; s/</\</g; s/>/\>/g;' $(srcdir)/$< > $@;
diff --git a/doc/Makefile.in b/doc/Makefile.in
index 0c3af53..204d17a 100644
--- a/doc/Makefile.in
+++ b/doc/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.14 from Makefile.am.
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -14,7 +14,17 @@
@SET_MAKE@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
@@ -78,7 +88,6 @@
build_triplet = @build@
host_triplet = @host@
subdir = doc
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -86,6 +95,7 @@
$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
@@ -137,10 +147,13 @@
$(am__cd) "$$dir" && rm -f $$files; }; \
}
man3dir = $(mandir)/man3
-am__installdirs = "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(man5dir)"
+am__installdirs = "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(man5dir)" \
+ "$(DESTDIR)$(man7dir)"
man5dir = $(mandir)/man5
+man7dir = $(mandir)/man7
MANS = $(man_MANS)
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
@@ -181,6 +194,7 @@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
LT_VERSION = @LT_VERSION@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -259,16 +273,19 @@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
-EL_MANS = editline.3 editrc.5
+EL_MANS = editline.3 editline.7 editrc.5
man_MANS = $(EL_MANS)
-EL_MAN_LINKS = el_init.3 el_end.3 el_reset.3 el_gets.3 el_getc.3 \
- el_push.3 el_parse.3 el_set.3 el_get.3 el_source.3 \
- el_resize.3 el_line.3 el_insertstr.3 el_deletestr.3 \
- el_history_init.3 el_history_end.3 el_history.3 el_tok_init.3 \
- el_tok_end.3 el_tok_reset.3 el_tok_line.3 el_tok_str.3
-
+EL_MAN_LINKS = el_deletestr.3 el_end.3 el_get.3 el_getc.3 el_gets.3 \
+ el_init.3 el_init_fd.3 el_insertstr.3 el_line.3 el_parse.3 \
+ el_push.3 el_reset.3 el_resize.3 el_set.3 el_source.3 \
+ history.3 history_end.3 history_init.3 tok_end.3 tok_init.3 \
+ tok_line.3 tok_reset.3 tok_str.3 el_wdeletestr.3 el_wget.3 \
+ el_wgetc.3 el_wgets.3 el_winsertstr.3 el_wline.3 el_wparse.3 \
+ el_wpush.3 el_wset.3 history_w.3 history_wend.3 \
+ history_winit.3 tok_wend.3 tok_winit.3 tok_wline.3 \
+ tok_wreset.3 tok_wstr.3
CLEANFILES = $(EL_MANS)
-EXTRA_DIST = editline.3.roff editrc.5.roff mdoc2man.awk
+EXTRA_DIST = editline.3.roff editline.7.roff editrc.5.roff mdoc2man.awk
all: all-am
.SUFFIXES:
@@ -281,17 +298,16 @@
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
$(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign doc/Makefile
-.PRECIOUS: Makefile
+ $(AUTOMAKE) --gnu doc/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -394,6 +410,49 @@
} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
-e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir)
+install-man7: $(man_MANS)
+ @$(NORMAL_INSTALL)
+ @list1=''; \
+ list2='$(man_MANS)'; \
+ test -n "$(man7dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man7dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man7dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.7[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^7][0-9a-z]*$$,7,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man7dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man7dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man7dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man7dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man7:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man7dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.7[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^7][0-9a-z]*$$,7,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man7dir)'; $(am__uninstall_files_from_dir)
tags TAGS:
ctags CTAGS:
@@ -401,7 +460,10 @@
cscope cscopelist:
-distdir: $(DISTFILES)
+distdir: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
@@ -435,7 +497,7 @@
check: check-am
all-am: Makefile $(MANS)
installdirs:
- for dir in "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(man5dir)"; do \
+ for dir in "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(man7dir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
@@ -506,7 +568,7 @@
install-info-am:
-install-man: install-man3 install-man5
+install-man: install-man3 install-man5 install-man7
install-pdf: install-pdf-am
@@ -536,7 +598,7 @@
uninstall-am: uninstall-local uninstall-man
-uninstall-man: uninstall-man3 uninstall-man5
+uninstall-man: uninstall-man3 uninstall-man5 uninstall-man7
.MAKE: install-am install-data-am install-strip
@@ -547,12 +609,14 @@
install-data-hook install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-man3 install-man5 \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags-am uninstall uninstall-am uninstall-local uninstall-man \
- uninstall-man3 uninstall-man5
+ install-man7 install-pdf install-pdf-am install-ps \
+ install-ps-am install-strip installcheck installcheck-am \
+ installdirs maintainer-clean maintainer-clean-generic \
+ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+ ps ps-am tags-am uninstall uninstall-am uninstall-local \
+ uninstall-man uninstall-man3 uninstall-man5 uninstall-man7
+
+.PRECIOUS: Makefile
install-data-hook: $(EL_MAN_LINKS)
@@ -562,12 +626,12 @@
$(EL_MANS):
@if test "$(MANTYPE)" = "mdoc"; then\
- cp $(srcdir)/$@.roff $@;\
- else\
- $(AWK) -f $(srcdir)/mdoc2man.awk $(srcdir)/$@.roff > $@ || rm -f $@;\
- fi;
+ cp $(srcdir)/$@.roff $@;\
+ else\
+ $(AWK) -f $(srcdir)/mdoc2man.awk $(srcdir)/$@.roff > $@ || rm -f $@;\
+ fi;
-uninstall-local:
+uninstall-local:
(cd $(DESTDIR)$(man3dir) && rm -f $(EL_MAN_LINKS))
changelog.txt: ../ChangeLog
diff --git a/doc/editline.3.roff b/doc/editline.3.roff
index 357ea16..feec9a6 100644
--- a/doc/editline.3.roff
+++ b/doc/editline.3.roff
@@ -1,6 +1,6 @@
-.\" $NetBSD: editline.3,v 1.80 2013/07/12 17:48:29 christos Exp $
+.\" $NetBSD: editline.3,v 1.99 2018/11/18 17:09:39 christos Exp $
.\"
-.\" Copyright (c) 1997-2013 The NetBSD Foundation, Inc.
+.\" Copyright (c) 1997-2014 The NetBSD Foundation, Inc.
.\" All rights reserved.
.\"
.\" This file was contributed to The NetBSD Foundation by Luke Mewburn.
@@ -26,7 +26,7 @@
.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
.\" POSSIBILITY OF SUCH DAMAGE.
.\"
-.Dd July 12, 2013
+.Dd November 9, 2018
.Dt EDITLINE 3
.Os
.Sh NAME
@@ -70,7 +70,7 @@
.Nm tok_wreset ,
.Nm tok_line ,
.Nm tok_wline ,
-.Nm tok_str
+.Nm tok_str ,
.Nm tok_wstr
.Nd line editor, history and tokenization functions
.Sh LIBRARY
@@ -92,11 +92,11 @@
.Ft int
.Fn el_getc "EditLine *e" "char *ch"
.Ft int
-.Fn el_wgetc "EditLine *e" "wchar_t *ch"
+.Fn el_wgetc "EditLine *e" "wchar_t *wc"
.Ft void
-.Fn el_push "EditLine *e" "const char *str"
+.Fn el_push "EditLine *e" "const char *mbs"
.Ft void
-.Fn el_wpush "EditLine *e" "const wchar_t *str"
+.Fn el_wpush "EditLine *e" "const wchar_t *wcs"
.Ft int
.Fn el_parse "EditLine *e" "int argc" "const char *argv[]"
.Ft int
@@ -113,7 +113,7 @@
.Fn el_source "EditLine *e" "const char *file"
.Ft void
.Fn el_resize "EditLine *e"
-.Fn int
+.Ft int
.Fn el_cursor "EditLine *e" "int count"
.Ft const LineInfo *
.Fn el_line "EditLine *e"
@@ -128,9 +128,9 @@
.Ft void
.Fn el_wdeletestr "EditLine *e" "int count"
.Ft History *
-.Fn history_init
+.Fn history_init void
.Ft HistoryW *
-.Fn history_winit
+.Fn history_winit void
.Ft void
.Fn history_end "History *h"
.Ft void
@@ -173,6 +173,14 @@
library).
Programs should be linked with
.Fl ledit ltermcap .
+.Pp
+The
+.Nm
+library respects the
+.Ev LC_CTYPE
+locale set by the application program and never uses
+.Xr setlocale 3
+to change the locale.
.Sh LINE EDITING FUNCTIONS
The line editing functions use a common data structure,
.Fa EditLine ,
@@ -189,8 +197,10 @@
The following functions are available:
.Bl -tag -width 4n
.It Fn el_init
-Initialise the line editor, and return a data structure
-to be used by all other line editing functions.
+Initialize the line editor, and return a data structure
+to be used by all other line editing functions, or
+.Dv NULL
+on failure.
.Fa prog
is the name of the invoking program, used when reading the
.Xr editrc 5
@@ -236,25 +246,57 @@
The return value may not remain valid across calls to
.Fn el_gets
and must be copied if the data is to be retained.
+.It Fn el_wgetc
+Read a wide character from the tty, respecting the current locale,
+or from the input queue described in
+.Xr editline 7
+if that is not empty, and store it in
+.Fa wc .
+If an invalid or incomplete character is found, it is discarded,
+.Va errno
+is set to
+.Er EILSEQ ,
+and the next character is read and stored in
+.Fa wc .
+Returns 1 if a valid character was read, 0 on end of file, or \-1 on
+.Xr read 2
+failure.
+In the latter case,
+.Va errno
+is set to indicate the error.
.It Fn el_getc
-Read a character from the tty.
-.Fa ch
-is modified to contain the character read.
-Returns the number of characters read if successful, \-1 otherwise,
-in which case
-.Dv errno
-can be inspected for the cause.
+Read a wide character as described for
+.Fn el_wgetc
+and return 0 on end of file or \-1 on failure.
+If the wide character can be represented as a single-byte character,
+convert it with
+.Xr wctob 3 ,
+store the result in
+.Fa ch ,
+and return 1; otherwise, set
+.Va errno
+to
+.Er ERANGE
+and return \-1.
+In the C or POSIX locale, this simply reads a byte, but for any other
+locale, including UTF-8, this is rarely useful.
+.It Fn el_wpush
+Push the wide character string
+.Fa wcs
+back onto the input queue described in
+.Xr editline 7 .
+If the queue overflows, for example due to a recursive macro,
+or if an error occurs, for example because
+.Fa wcs
+is
+.Dv NULL
+or memory allocation fails, the function beeps at the user,
+but does not report the problem to the caller.
.It Fn el_push
-Pushes
-.Fa str
-back onto the input stream.
-This is used by the macro expansion mechanism.
-Refer to the description of
-.Ic bind
-.Fl s
-in
-.Xr editrc 5
-for more information.
+Use the current locale to convert the multibyte string
+.Fa mbs
+to a wide character string, and pass the result to
+.Fn el_wpush .
.It Fn el_parse
Parses the
.Fa argv
@@ -290,6 +332,7 @@
.Fa op
determines which parameter to set, and each operation has its
own parameter list.
+Returns 0 on success, \-1 on failure.
.Pp
The following values for
.Fa op
@@ -313,6 +356,8 @@
A subsequent second start/stop literal character ends this behavior.
This is typically used to embed literal escape sequences that change the
color/style of the terminal in the prompt.
+Note that the literal escape character cannot be the last character in the
+prompt, as the escape sequence is attached to the next character in the prompt.
.Dv 0
unsets it.
.It Dv EL_REFRESH
@@ -462,18 +507,31 @@
In unbuffered mode,
.Fn el_gets
will return immediately after processing a single character.
-.It Dv EL_GETCFN , Fa "int (*f)(EditLine *, char *c)"
-Define the character reading function as
-.Fa f ,
-which is to return the number of characters read and store them in
-.Fa c .
-This function is called internally by
-.Fn el_gets
+.It Dv EL_GETCFN , Fa "el_rfunc_t f"
+Whenever reading a character, use the function
+.Bd -ragged -offset indent -compact
+.Ft int
+.Fo f
+.Fa "EditLine *e"
+.Fa "wchar_t *wc"
+.Fc
+.Ed
+which stores the character in
+.Fa wc
+and returns 1 on success, 0 on end of file, or \-1 on I/O or encoding
+errors.
+Functions internally using it include
+.Fn el_wgets ,
+.Fn el_wgetc ,
+.Fn el_gets ,
and
.Fn el_getc .
-The builtin function can be set or restored with the special function
-name
-.Dq Dv EL_BUILTIN_GETCFN .
+Initially, a builtin function is installed, and replacing it
+is discouraged because writing such a function is very error prone.
+The builtin function can be restored at any time by passing the
+special value
+.Dv EL_BUILTIN_GETCFN
+instead of a function pointer.
.It Dv EL_CLIENTDATA , Fa "void *data"
Register
.Fa data
@@ -516,61 +574,70 @@
.Fa result :
.Bl -tag -width 4n
.It Dv EL_PROMPT , Fa "char *(*f)(EditLine *)" , Fa "char *c"
-Return a pointer to the function that displays the prompt in
-.Fa f .
+Set
+.Fa f
+to a pointer to the function that displays the prompt.
If
.Fa c
is not
.Dv NULL ,
-return the start/stop literal prompt character in it.
+set it to the start/stop literal prompt character.
.It Dv EL_RPROMPT , Fa "char *(*f)(EditLine *)" , Fa "char *c"
-Return a pointer to the function that displays the prompt in
-.Fa f .
+Set
+.Fa f
+to a pointer to the function that displays the prompt.
If
.Fa c
is not
.Dv NULL ,
-return the start/stop literal prompt character in it.
-.It Dv EL_EDITOR , Fa "const char **"
-Return the name of the editor, which will be one of
+set it to the start/stop literal prompt character.
+.It Dv EL_EDITOR , Fa "const char **n"
+Set the name of the editor in
+.Fa n ,
+which will be one of
.Dq emacs
or
.Dq vi .
.It Dv EL_GETTC , Fa "const char *name" , Fa "void *value"
-Return non-zero if
+If
.Fa name
is a valid
.Xr termcap 5
-capability
-and set
+capability set
.Fa value
to the current value of that capability.
-.It Dv EL_SIGNAL , Fa "int *"
-Return non-zero if
+.It Dv EL_SIGNAL , Fa "int *s"
+Set
+.Fa s
+to non-zero if
.Nm
has installed private signal handlers (see
.Fn el_get
above).
-.It Dv EL_EDITMODE , Fa "int *"
-Return non-zero if editing is enabled.
-.It Dv EL_GETCFN , Fa "int (**f)(EditLine *, char *)"
-Return a pointer to the function that read characters, which is equal to
-.Dq Dv EL_BUILTIN_GETCFN
-in the case of the default builtin function.
+.It Dv EL_EDITMODE , Fa "int *c"
+Set
+.Fa c
+to non-zero if editing is enabled.
+.It Dv EL_GETCFN , Fa "el_rfunc_t *f"
+Set
+.Fa f
+to a pointer to the function that reads characters, or to
+.Dv EL_BUILTIN_GETCFN
+if the builtin function is in use.
.It Dv EL_CLIENTDATA , Fa "void **data"
-Retrieve
+Set
.Fa data
-previously registered with the corresponding
+to the previously registered client data set by an
.Fn el_set
call.
-.It Dv EL_UNBUFFERED , Fa "int"
-Return non-zero if unbuffered mode is enabled.
-.It Dv EL_PREP_TERM , Fa "int"
-Sets or clears terminal editing mode.
+.It Dv EL_UNBUFFERED , Fa "int *c"
+Set
+.Fa c
+to non-zero if unbuffered mode is enabled.
.It Dv EL_GETFP , Fa "int fd", Fa "FILE **fp"
-Return in
+Set
.Fa fp
-the current
+to the current
.Nm editline
file pointer for
.Dq input
@@ -588,7 +655,7 @@
.Dv 2 .
.El
.It Fn el_source
-Initialise
+Initialize
.Nm
by reading the contents of
.Fa file .
@@ -600,11 +667,15 @@
is
.Dv NULL ,
try
+.Pa $EDITRC
+and if that is not set
.Pa $HOME/.editrc .
Refer to
.Xr editrc 5
for details on the format of
.Fa file .
+.Fn el_source
+returns 0 on success and \-1 on error.
.It Fn el_resize
Must be called if the terminal size changes.
If
@@ -664,8 +735,10 @@
The following functions are available:
.Bl -tag -width 4n
.It Fn history_init
-Initialise the history list, and return a data structure
-to be used by all other history list functions.
+Initialize the history list, and return a data structure
+to be used by all other history list functions, or
+.Dv NULL
+on failure.
.It Fn history_end
Clean up and finish with
.Fa h ,
@@ -709,11 +782,13 @@
Return the last element in the history.
.It Dv H_PREV
Return the previous element in the history.
+It is newer than the current one.
.It Dv H_NEXT
Return the next element in the history.
+It is older than the current one.
.It Dv H_CURR
Return the current element in the history.
-.It Dv H_SET
+.It Dv H_SET , Fa "int position"
Set the cursor to point to the requested element.
.It Dv H_ADD , Fa "const char *str"
Append
@@ -730,16 +805,16 @@
.It Dv H_ENTER , Fa "const char *str"
Add
.Fa str
-as a new element to the history, and, if necessary,
+as a new element to the history and, if necessary,
removing the oldest entry to keep the list to the created size.
If
.Dv H_SETUNIQUE
-was has been called with a non-zero arguments, the element
+has been called with a non-zero argument, the element
will not be entered into the history if its contents match
the ones of the current history element.
If the element is entered
.Fn history
-returns 1, if it is ignored as a duplicate returns 0.
+returns 1; if it is ignored as a duplicate returns 0.
Finally
.Fn history
returns \-1 if an error occurred.
@@ -761,6 +836,18 @@
.It Dv H_SAVE , Fa "const char *file"
Save the history list to
.Fa file .
+.It Dv H_SAVE_FP , Fa "FILE *fp"
+Save the history list to the opened
+.Ft FILE
+pointer
+.Fa fp .
+.It Dv H_NSAVE_FP , Fa "size_t n" , Fa "FILE *fp"
+Save the last
+.Ft n
+history entries to the opened
+.Ft FILE
+pointer
+.Fa fp .
.It Dv H_SETUNIQUE , Fa "int unique"
Set flag that adjacent identical event strings should not be entered
into the history.
@@ -771,14 +858,14 @@
Delete the event numbered
.Fa e .
This function is only provided for
-.Xr readline 3
+.Nm readline
compatibility.
The caller is responsible for free'ing the string in the returned
.Fa HistEvent .
.El
.Pp
.Fn history
-returns \*[Gt]= 0 if the operation
+returns >= 0 if the operation
.Fa op
succeeds.
Otherwise, \-1 is returned and
@@ -796,7 +883,7 @@
The following functions are available:
.Bl -tag -width 4n
.It Fn tok_init
-Initialise the tokenizer, and return a data structure
+Initialize the tokenizer, and return a data structure
to be used by all other tokenizer functions.
.Fa IFS
contains the Input Field Separators, which defaults to
@@ -864,7 +951,8 @@
.Xr signal 3 ,
.Xr termcap 3 ,
.Xr editrc 5 ,
-.Xr termcap 5
+.Xr termcap 5 ,
+.Xr editline 7
.Sh HISTORY
The
.Nm
@@ -881,17 +969,22 @@
appeared in
.Nx 1.5 .
.Sh AUTHORS
+.An -nosplit
The
.Nm
-library was written by Christos Zoulas.
-Luke Mewburn wrote this manual and implemented
+library was written by
+.An Christos Zoulas .
+.An Luke Mewburn
+wrote this manual and implemented
.Dv CC_REDISPLAY ,
.Dv CC_REFRESH_BEEP ,
.Dv EL_EDITMODE ,
and
.Dv EL_RPROMPT .
-Jaromir Dolecek implemented the readline emulation.
-Johny Mattsson implemented wide-character support.
+.An Jaromir Dolecek
+implemented the readline emulation.
+.An Johny Mattsson
+implemented wide-character support.
.Sh BUGS
At this time, it is the responsibility of the caller to
check the result of the
diff --git a/doc/editline.7.roff b/doc/editline.7.roff
new file mode 100644
index 0000000..863bab9
--- /dev/null
+++ b/doc/editline.7.roff
@@ -0,0 +1,935 @@
+.\" $NetBSD: editline.7,v 1.5 2016/05/09 21:27:55 christos Exp $
+.\" $OpenBSD: editline.7,v 1.1 2016/04/20 01:11:45 schwarze Exp $
+.\"
+.\" Copyright (c) 2016 Ingo Schwarze <schwarze@openbsd.org>
+.\"
+.\" Permission to use, copy, modify, and distribute this software for any
+.\" purpose with or without fee is hereby granted, provided that the above
+.\" copyright notice and this permission notice appear in all copies.
+.\"
+.\" THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+.\" OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+.\"
+.Dd May 7, 2016
+.Dt EDITLINE 7
+.Os
+.Sh NAME
+.Nm editline
+.Nd line editing user interface
+.Sh DESCRIPTION
+When a program using the
+.Xr editline 3
+library prompts for an input string using the function
+.Xr el_wgets 3 ,
+it reads characters from the terminal.
+Invalid input bytes that do not form characters are silently
+discarded.
+For each character read, one editor command is executed.
+The mapping of input characters to editor commands depends on the
+editing mode.
+There are three editing modes: vi insert mode, vi command mode,
+and emacs mode.
+The default is vi insert mode.
+The program can switch the default to emacs mode by using the
+.Xr el_set 3
+or
+.Xr el_parse 3
+functions, and the user can switch to emacs mode either in the
+.Xr editrc 5
+configuration file or interactively with the
+.Ic ed-command
+editor command, in all three cases executing the
+.Ic bind Fl e
+builtin command.
+.Pp
+If trying to read from the terminal results in end of file or an
+error, the library signals end of file to the program and does not
+return a string.
+.Ss Input character bindings
+All default bindings described below can be overridden by individual
+programs and can be changed with the
+.Xr editrc 5
+.Ic bind
+builtin command.
+.Pp
+In the following tables,
+.Sq Ctrl-
+indicates a character with the bit 0x40 flipped, and
+.Sq Meta-
+indicates a character with the bit 0x80 set.
+In vi insert mode and in emacs mode, all Meta-characters considered
+printable by the current
+.Xr locale 1
+are bound to
+.Ic ed-insert
+instead of to the editor command listed below.
+Consequently, in UTF-8 mode, most of the Meta-characters are not
+directly accessible because their code points are occupied by
+printable Unicode characters, and Meta-characters are usually input
+using the
+.Ic em-meta-next
+editor command.
+For example, to enter
+.Sq Meta-B
+in order to call the
+.Ic ed-prev-word
+editor command in emacs mode, call
+.Ic em-meta-next
+by pressing and releasing the escape key (or equivalently, Ctrl-[),
+then press and release the
+.Sq B
+key.
+If you have configured a Meta-key on your keyboard, for example
+with
+.Ql setxkbmap -option altwin:left_meta_win ,
+the Ctrl-Meta-characters are directly accessible.
+For example, to enter
+.Sq Ctrl-Meta-H
+in order to call the
+.Ic ed-delete-prev-word
+editor command in emacs mode, hold down the keys
+.Sq Ctrl ,
+.Sq Meta ,
+and
+.Sq H
+at the same time.
+Alternatively, press and release the escape key, then press and
+release
+.Sq Ctrl-H .
+.Pp
+In vi input mode, input characters are bound to the following editor
+commands by default:
+.Bl -column -offset indent "Ctrl-Z, TSTP" "ed-search-next-history"
+.It Ctrl-D, EOF Ta Ic vi-list-or-eof
+.It Ctrl-H, BS Ta Ic vi-delete-prev-char
+.It Ctrl-J, LF Ta Ic ed-newline
+.It Ctrl-M, CR Ta Ic ed-newline
+.It Ctrl-Q Ta Ic ed-tty-start-output
+.It Ctrl-S Ta Ic ed-tty-stop-output
+.It Ctrl-U Ta Ic vi-kill-line-prev
+.It Ctrl-V Ta Ic ed-quoted-insert
+.It Ctrl-W Ta Ic ed-delete-prev-word
+.It Ctrl-[, ESC Ta Ic vi-command-mode
+.It Ctrl-\e, QUIT Ta Ic ed-tty-sigquit
+.It Ctrl-?, DEL Ta Ic vi-delete-prev-char
+.El
+.Pp
+All other input characters except the NUL character (Ctrl-@) are
+bound to
+.Ic ed-insert .
+.Pp
+In vi command mode, input characters are bound to the following
+editor commands by default:
+.Bl -column -offset indent "Ctrl-Z, TSTP" "ed-search-next-history"
+.It Ctrl-A Ta Ic ed-move-to-beg
+.It Ctrl-C, INT Ta Ic ed-tty-sigint
+.It Ctrl-E Ta Ic ed-move-to-end
+.It Ctrl-H, BS Ta Ic ed-delete-prev-char
+.It Ctrl-J, LF Ta Ic ed-newline
+.It Ctrl-K Ta Ic ed-kill-line
+.It Ctrl-L, FF Ta Ic ed-clear-screen
+.It Ctrl-M, CR Ta Ic ed-newline
+.It Ctrl-N Ta Ic ed-next-history
+.It Ctrl-O Ta Ic ed-tty-flush-output
+.It Ctrl-P Ta Ic ed-prev-history
+.It Ctrl-Q Ta Ic ed-tty-start-output
+.It Ctrl-R Ta Ic ed-redisplay
+.It Ctrl-S Ta Ic ed-tty-stop-output
+.It Ctrl-U Ta Ic vi-kill-line-prev
+.It Ctrl-W Ta Ic ed-delete-prev-word
+.It Ctrl-[, ESC Ta Ic em-meta-next
+.It Ctrl-\e, QUIT Ta Ic ed-tty-sigquit
+.It Space Ta Ic ed-next-char
+.It # Ta Ic vi-comment-out
+.It $ Ta Ic ed-move-to-end
+.It % Ta Ic vi-match
+.It + Ta Ic ed-next-history
+.It \&, Ta Ic vi-repeat-prev-char
+.It - Ta Ic ed-prev-history
+.It \&. Ta Ic vi-redo
+.It / Ta Ic vi-search-prev
+.It 0 Ta Ic vi-zero
+.It 1 to 9 Ta Ic ed-argument-digit
+.It \&: Ta Ic ed-command
+.It \&; Ta Ic vi-repeat-next-char
+.It \&? Ta Ic vi-search-next
+.It @ Ta Ic vi-alias
+.It A Ta Ic vi-add-at-eol
+.It B Ta Ic vi-prev-big-word
+.It C Ta Ic vi-change-to-eol
+.It D Ta Ic ed-kill-line
+.It E Ta Ic vi-end-big-word
+.It F Ta Ic vi-prev-char
+.It G Ta Ic vi-to-history-line
+.It I Ta Ic vi-insert-at-bol
+.It J Ta Ic ed-search-next-history
+.It K Ta Ic ed-search-prev-history
+.It N Ta Ic vi-repeat-search-prev
+.It O Ta Ic ed-sequence-lead-in
+.It P Ta Ic vi-paste-prev
+.It R Ta Ic vi-replace-mode
+.It S Ta Ic vi-substitute-line
+.It T Ta Ic vi-to-prev-char
+.It U Ta Ic vi-undo-line
+.It W Ta Ic vi-next-big-word
+.It X Ta Ic ed-delete-prev-char
+.It Y Ta Ic vi-yank-end
+.It \&[ Ta Ic ed-sequence-lead-in
+.It ^ Ta Ic ed-move-to-beg
+.It _ Ta Ic vi-history-word
+.It a Ta Ic vi-add
+.It b Ta Ic vi-prev-word
+.It c Ta Ic vi-change-meta
+.It d Ta Ic vi-delete-meta
+.It e Ta Ic vi-end-word
+.It f Ta Ic vi-next-char
+.It h Ta Ic ed-prev-char
+.It i Ta Ic vi-insert
+.It j Ta Ic ed-next-history
+.It k Ta Ic ed-prev-history
+.It l Ta Ic ed-next-char
+.It n Ta Ic vi-repeat-search-next
+.It p Ta Ic vi-paste-next
+.It r Ta Ic vi-replace-char
+.It s Ta Ic vi-substitute-char
+.It t Ta Ic vi-to-next-char
+.It u Ta Ic vi-undo
+.It v Ta Ic vi-histedit
+.It w Ta Ic vi-next-word
+.It x Ta Ic ed-delete-next-char
+.It y Ta Ic vi-yank
+.It \&| Ta Ic vi-to-column
+.It ~ Ta Ic vi-change-case
+.It Ctrl-?, DEL Ta Ic ed-delete-prev-char
+.It Meta-O Ta Ic ed-sequence-lead-in
+.It Meta-[ Ta Ic ed-sequence-lead-in
+.El
+.Pp
+In emacs mode, input characters are bound to the following editor
+commands by default:
+.Bl -column -offset indent "Ctrl-Z, TSTP" "ed-search-next-history"
+.It 0 to 9 Ta Ic ed-digit
+.It Ctrl-@, NUL Ta Ic em-set-mark
+.It Ctrl-A Ta Ic ed-move-to-beg
+.It Ctrl-B Ta Ic ed-prev-char
+.It Ctrl-C, INT Ta Ic ed-tty-sigint
+.It Ctrl-D, EOF Ta Ic em-delete-or-list
+.It Ctrl-E Ta Ic ed-move-to-end
+.It Ctrl-F Ta Ic ed-next-char
+.It Ctrl-H, BS Ta Ic em-delete-prev-char
+.It Ctrl-J, LF Ta Ic ed-newline
+.It Ctrl-K Ta Ic ed-kill-line
+.It Ctrl-L, FF Ta Ic ed-clear-screen
+.It Ctrl-M, CR Ta Ic ed-newline
+.It Ctrl-N Ta Ic ed-next-history
+.It Ctrl-O Ta Ic ed-tty-flush-output
+.It Ctrl-P Ta Ic ed-prev-history
+.It Ctrl-Q Ta Ic ed-tty-start-output
+.It Ctrl-R Ta Ic ed-redisplay
+.It Ctrl-S Ta Ic ed-tty-stop-output
+.It Ctrl-T Ta Ic ed-transpose-chars
+.It Ctrl-U Ta Ic ed-kill-line
+.It Ctrl-V Ta Ic ed-quoted-insert
+.It Ctrl-W Ta Ic em-kill-region
+.It Ctrl-X Ta Ic ed-sequence-lead-in
+.It Ctrl-Y Ta Ic em-yank
+.It Ctrl-Z, TSTP Ta Ic ed-tty-sigtstp
+.It Ctrl-[, ESC Ta Ic em-meta-next
+.It Ctrl-\e, QUIT Ta Ic ed-tty-sigquit
+.It Ctrl-] Ta Ic ed-tty-dsusp
+.It Ctrl-?, DEL Ta Ic em-delete-prev-char
+.It Ctrl-Meta-H Ta Ic ed-delete-prev-word
+.It Ctrl-Meta-L Ta Ic ed-clear-screen
+.It Ctrl-Meta-_ Ta Ic em-copy-prev-word
+.It Meta-0 to 9 Ta Ic ed-argument-digit
+.It Meta-B Ta Ic ed-prev-word
+.It Meta-C Ta Ic em-capitol-case
+.It Meta-D Ta Ic em-delete-next-word
+.It Meta-F Ta Ic em-next-word
+.It Meta-L Ta Ic em-lower-case
+.It Meta-N Ta Ic ed-search-next-history
+.It Meta-O Ta Ic ed-sequence-lead-in
+.It Meta-P Ta Ic ed-search-prev-history
+.It Meta-U Ta Ic em-upper-case
+.It Meta-W Ta Ic em-copy-region
+.It Meta-X Ta Ic ed-command
+.It Meta-[ Ta Ic ed-sequence-lead-in
+.It Meta-b Ta Ic ed-prev-word
+.It Meta-c Ta Ic em-capitol-case
+.It Meta-d Ta Ic em-delete-next-word
+.It Meta-f Ta Ic em-next-word
+.It Meta-l Ta Ic em-lower-case
+.It Meta-n Ta Ic ed-search-next-history
+.It Meta-p Ta Ic ed-search-prev-history
+.It Meta-u Ta Ic em-upper-case
+.It Meta-w Ta Ic em-copy-region
+.It Meta-x Ta Ic ed-command
+.It Ctrl-Meta-? Ta Ic ed-delete-prev-word
+.El
+.Pp
+The remaining
+.Xr ascii 7
+characters in the range 0x20 to 0x7e are bound to
+.Ic ed-insert .
+.Pp
+If standard output is not connected to a terminal device
+or
+.Xr el_set 3
+was used to set
+.Dv EL_EDITMODE
+to 0, all input character bindings are disabled and all characters
+typed are appended to the edit buffer.
+In that case, the edit buffer is returned to the program after a
+newline or carriage return character is typed, or after the first
+character typed if
+.Xr el_set 3
+was used to set
+.Dv EL_UNBUFFERED
+to non-zero.
+.Ss Editor commands
+Most editor commands accept an optional argument.
+The argument is entered by prefixing the editor command with one
+or more of the editor commands
+.Ic ed-argument-digit ,
+.Ic ed-digit ,
+.Ic em-universal-argument ,
+or
+.Ic vi-zero .
+When an argument is not provided, it defaults to 1.
+For most editor commands, the effect of an argument is to repeatedly
+execute the command that number of times.
+.Pp
+When talking about a character string from a left character to a
+right character, the left character is included in the string, while
+the right character is not included.
+.Pp
+If an editor command causes an error, the input character is discarded,
+no action occurs, and the terminal bell is rung.
+In case of a non-fatal error, the terminal bell is also rung,
+but the editor command takes effect anyway.
+.Pp
+In the following list, the default key bindings are listed after
+each editor command.
+.Bl -tag -width 4n
+.It Ic ed-argument-digit Pq vi command: 1 to 9; emacs: Meta-0 to Meta-9
+If in argument input mode, append the input digit to the argument
+being read.
+Otherwise, switch to argument input mode and use the input digit
+as the most significant digit of the argument.
+It is an error if the input character is not a digit or if the
+existing argument is already greater than a million.
+.It Ic ed-clear-screen Pq vi command: Ctrl-L; emacs: Ctrl-L, Ctrl-Meta-L
+Clear the screen and display the edit buffer at the top.
+Ignore any argument.
+.It Ic ed-command Pq vi command: So \&: Sc ; emacs: Meta-X, Meta-x
+Read a line from the terminal bypassing the normal line editing
+functionality and execute that line as an
+.Xr editrc 5
+builtin command.
+If in vi command mode, also switch back to vi insert mode.
+Ignore any argument.
+.It Ic ed-delete-next-char Pq vi command: x
+Delete the character at the cursor position.
+With an argument, delete that number of characters.
+In emacs mode, it is an error if the cursor is at the end of the
+edit buffer.
+In vi mode, the last character in the edit buffer is deleted in
+that case, and it is an error if the buffer is empty.
+.It Ic ed-delete-prev-char Pq vi command: X, Ctrl-H, BS, Ctrl-?, DEL
+Delete the character to the left of the cursor position.
+With an argument, delete that number of characters.
+It is an error if the cursor is at the beginning of the edit buffer.
+.It Ic ed-delete-prev-word Pq vi: Ctrl-W; emacs: Ctrl-Meta-H, Ctrl-Meta-?
+Move to the left to the closest beginning of a word, delete the
+string from that position to the cursor, and save it to the cut
+buffer.
+With an argument, delete that number of words.
+It is an error if the cursor is at the beginning of the edit buffer.
+.It Ic ed-digit Pq emacs: 0 to 9
+If in argument input mode, append the input digit to the argument
+being read.
+Otherwise, call
+.Ic ed-insert .
+It is an error if the input character is not a digit or if the
+existing argument is already greater than a million.
+.It Ic ed-end-of-file Pq not bound by default
+Discard the edit buffer and indicate end of file to the program.
+Ignore any argument.
+.It Ic ed-ignore Pq various
+Discard the input character and do nothing.
+.It Ic ed-insert Pq vi input: almost all; emacs: printable characters
+In insert mode, insert the input character left of the cursor
+position.
+In replace mode, overwrite the character at the cursor and move the
+cursor to the right by one character position.
+Accept an argument to do this repeatedly.
+It is an error if the input character is the NUL character (Ctrl-@).
+Failure to enlarge the edit buffer also results in an error.
+.It Ic ed-kill-line Pq vi command: D, Ctrl-K; emacs: Ctrl-K, Ctrl-U
+Delete the string from the cursor position to the end of the line
+and save it to the cut buffer.
+Ignore any argument.
+.It Ic ed-move-to-beg Pq vi command: ^, Ctrl-A; emacs: Ctrl-A
+In vi mode, move the cursor to the first non-space character in the
+edit buffer.
+In emacs mode, move the cursor to the beginning of the edit buffer.
+Ignore any argument.
+Can be used as a movement command after
+.Ic vi_change_meta ,
+.Ic vi_delete_meta ,
+or
+.Ic vi_yank .
+.It Ic ed-move-to-end Pq vi command: $, Ctrl-E; emacs: Ctrl-E
+Move the cursor to the end of the edit buffer.
+Ignore any argument.
+Can be used as a movement command after
+.Ic vi_change_meta ,
+.Ic vi_delete_meta ,
+or
+.Ic vi_yank .
+.It Ic ed-newline Pq all modes: Ctrl-J, LF, Ctrl-M, CR
+Append a newline character to the edit buffer and return the edit
+buffer to the program.
+Ignore any argument.
+.It Ic ed-next-char Pq vi command: Space, l; emacs: Ctrl-F
+Move the cursor one character position to the right.
+With an argument, move by that number of characters.
+Can be used as a movement command after
+.Ic vi_change_meta ,
+.Ic vi_delete_meta ,
+or
+.Ic vi_yank .
+It is an error if the cursor is already at the end of the edit
+buffer.
+.It Ic ed-next-history Pq vi command: j, +, Ctrl-N; emacs: Ctrl-N
+Replace the edit buffer with the next history line.
+That line is older than the current line.
+With an argument, go forward by that number of history lines.
+It is a non-fatal error to advance by more lines than are available.
+.It Ic ed-next-line Pq not bound by default
+Move the cursor down one line.
+With an argument, move down by that number of lines.
+It is an error if the edit buffer does not contain enough newline
+characters to the right of the cursor position.
+.It Ic ed-prev-char Pq vi command: h; emacs: Ctrl-B
+Move the cursor one character position to the left.
+With an argument, move by that number of characters.
+Can be used as a movement command after
+.Ic vi_change_meta ,
+.Ic vi_delete_meta ,
+or
+.Ic vi_yank .
+It is an error if the cursor is already at the beginning of the
+edit buffer.
+.It Ic ed-prev-history Pq vi command: k, -, Ctrl-P; emacs: Ctrl-P
+Replace the edit buffer with the previous history line.
+That line is newer than the current line.
+With an argument, go back by that number of lines.
+It is a non-fatal error to back up by more lines than are available.
+.It Ic ed-prev-line Pq not bound by default
+Move the cursor up one line.
+With an argument, move up by that number of lines.
+It is an error if the edit buffer does not contain enough newline
+characters to the left of the cursor position.
+.It Ic ed-prev-word Pq emacs: Meta-B, Meta-b
+Move the cursor to the left to the closest beginning of a word.
+With an argument, repeat that number of times.
+Can be used as a movement command after
+.Ic vi_change_meta ,
+.Ic vi_delete_meta ,
+or
+.Ic vi_yank .
+It is an error if the cursor is already at the beginning of the
+edit buffer.
+.It Ic ed-quoted-insert Pq vi insert, emacs: Ctrl-V
+Read one character from the terminal bypassing the normal line
+editing functionality and call
+.Ic ed-insert
+on it.
+If trying to read the character returns end of file or an error,
+call
+.Ic ed-end-of-file
+instead.
+.It Ic ed-redisplay Pq vi command, emacs: Ctrl-R
+Redisplay everything.
+Ignore any argument.
+.It Ic ed-search-next-history Pq vi command: J; emacs: Meta-N, Meta-n
+Replace the edit buffer with the next matching history entry.
+.It Ic ed-search-prev-history Pq vi command: K; emacs: Meta-P, Meta-p
+Replace the edit buffer with the previous matching history entry.
+.It Ic ed-sequence-lead-in Pq vi cmd: O, \&[; emacs: Ctrl-X;\
+ both: Meta-O, Meta-[
+Call a macro.
+See the section about
+.Sx Macros
+below for details.
+.It Ic ed-start-over Pq not bound by default
+Discard the contents of the edit buffer and start from scratch.
+Ignore any argument.
+.It Ic ed-transpose-chars Pq emacs: Ctrl-T
+Exchange the character at the cursor position with the one to the
+left of it and move the cursor to the character to the right of the
+two exchanged characters.
+Ignore any argument.
+It is an error if the cursor is at the beginning of the edit buffer
+or if the edit buffer contains less than two characters.
+.It Ic ed-unassigned Pq all characters not listed
+This editor command always results in an error.
+.It Ic em-capitol-case Pq emacs: Meta-C, Meta-c
+Capitalize the string from the cursor to the end of the current
+word.
+That is, if it contains at least one alphabetic character, convert
+the first alphabetic character to upper case, and convert all
+characters to the right of it to lower case.
+In any case, move the cursor to the next character after the end
+of the current word.
+.It Ic em-copy-prev-word Pq emacs: Ctrl-Meta-_
+Copy the string from the beginning of the current word to the cursor
+and insert it to the left of the cursor.
+Move the cursor to the character after the inserted string.
+It is an error if the cursor is at the beginning of the edit buffer.
+.It Ic em-copy-region Pq emacs: Meta-W, Meta-w
+Copy the string from the cursor to the mark to the cut buffer.
+It is an error if the mark is not set.
+.It Ic em-delete-next-word Pq emacs: Meta-D, Meta-d
+Delete the string from the cursor to the end of the current word
+and save it to the cut buffer.
+It is an error if the cursor is at the end of the edit buffer.
+.It Ic em-delete-or-list Pq emacs: Ctrl-D, EOF
+If the cursor is not at the end of the line, delete the character
+at the cursor.
+If the edit buffer is empty, indicate end of file to the program.
+It is an error if the cursor is at the end of the edit buffer and
+the edit buffer is not empty.
+.It Ic em-delete-prev-char Pq emacs: Ctrl-H, BS, Ctrl-?, DEL
+Delete the character to the left of the cursor.
+It is an error if the cursor is at the beginning of the edit buffer.
+.It Ic em-exchange-mark Pq not bound by default
+Exchange the cursor and the mark.
+.It Ic em-gosmacs-transpose Pq not bound by default
+Exchange the two characters to the left of the cursor.
+It is an error if the cursor is on the first or second character
+of the edit buffer.
+.It Ic em-inc-search-next Pq not bound by default
+Emacs incremental next search.
+.It Ic em-inc-search-prev Pq not bound by default
+Emacs incremental reverse search.
+.It Ic em-kill-line Pq not bound by default
+Delete the entire contents of the edit buffer and save it to the
+cut buffer.
+.It Ic em-kill-region Pq emacs: Ctrl-W
+Delete the string from the cursor to the mark and save it to the
+cut buffer.
+It is an error if the mark is not set.
+.It Ic em-lower-case Pq emacs: Meta-L, Meta-l
+Convert the characters from the cursor to the end of the current
+word to lower case.
+.It Ic em-meta-next Pq vi command, emacs: Ctrl-[, ESC
+Set the bit 0x80 on the next character typed.
+Unless the resulting code point is printable, holding down the
+.Sq Meta-
+key while typing that character is a simpler way to achieve the
+same effect.
+.It Ic em-next-word Pq Meta-F, Meta-f
+Move the cursor to the end of the current word.
+Can be used as a movement command after
+.Ic vi_change_meta ,
+.Ic vi_delete_meta ,
+or
+.Ic vi_yank .
+It is an error if the cursor is already at the end of the edit
+buffer.
+.It Ic em-set-mark Pq emacs: Ctrl-Q, NUL
+Set the mark at the current cursor position.
+.It Ic em-toggle-overwrite Pq not bound by default
+Switch from insert to overwrite mode or vice versa.
+.It Ic em-universal-argument Pq not bound by default
+If in argument input mode, multiply the argument by 4.
+Otherwise, switch to argument input mode and set the argument to 4.
+It is an error if the existing argument is already greater than a
+million.
+.It Ic em-upper-case Pq emacs: Meta-U, Meta-u
+Convert the characters from the cursor to the end of the current
+word to upper case.
+.It Ic em-yank Pq emacs: Ctrl-Y
+Paste the cut buffer to the left of the cursor.
+.It Ic vi-add Pq vi command: a
+Switch to vi insert mode.
+Unless the cursor is already at the end of the edit buffer, move
+it one character position to the right.
+.It Ic vi-add-at-eol Pq vi command: A
+Switch to vi insert mode and move the cursor to the end of the edit
+buffer.
+.It Ic vi-alias Pq vi command: @
+If an alias function was defined by calling the
+.Xr el_set 3
+or
+.Xr el_wset 3
+function with the argument
+.Dv EL_ALIAS_TEXT ,
+read one character from the terminal bypassing the normal line
+editing functionality, call the alias function passing the argument that was specified with
+.Dv EL_ALIAS_TEXT
+as the first argument and the character read, with an underscore
+prepended, as the second argument, and pass the string returned
+from the alias function to
+.Xr el_wpush 3 .
+It is an error if no alias function is defined or if trying to read
+the character results in end of file or an error.
+.It Ic vi-change-case Pq vi command: ~
+Change the case of the character at the cursor and move the cursor
+one character position to the right.
+It is an error if the cursor is already at the end of the edit
+buffer.
+.It Ic vi-change-meta Pq vi command: c
+Delete the string from the cursor to the position specified by the
+following movement command and save a copy of it to the cut buffer.
+When given twice in a row, instead delete the whole contents of the
+edit buffer and save a copy of it to the cut buffer.
+In either case, switch to vi insert mode after that.
+.It Ic vi-change-to-eol Pq vi command: C
+Delete the string from the cursor position to the end of the line
+and save it to the cut buffer, then switch to vi insert mode.
+.It Ic vi-command-mode Pq vi insert: Ctrl-[, ESC
+Discard pending actions and arguments and switch to vi command mode.
+Unless the cursor is already at the beginning of the edit buffer,
+move it to the left by one character position.
+.It Ic vi-comment-out Pq vi command: #
+Insert a
+.Sq #
+character at the beginning of the edit buffer and return the edit
+buffer to the program.
+.It Ic vi-delete-meta Pq vi command: d
+Delete the string from the cursor to the position specified by the
+following movement command and save a copy of it to the cut buffer.
+When given twice in a row, instead delete the whole contents of the
+edit buffer and save a copy of it to the cut buffer.
+.It Ic vi-delete-prev-char Pq vi insert: Ctrl-H, BS, Ctrl-?, DEL
+Delete the character to the left of the cursor.
+It is an error if the cursor is already at the beginning of the
+edit buffer.
+.It Ic vi-end-big-word Pq vi command: E
+Move the cursor to the end of the current space delimited word.
+Can be used as a movement command after
+.Ic vi_change_meta ,
+.Ic vi_delete_meta ,
+or
+.Ic vi_yank .
+It is an error if the cursor is already at the end of the edit
+buffer.
+.It Ic vi-end-word Pq vi command: e
+Move the cursor to the end of the current word.
+Can be used as a movement command after
+.Ic vi_change_meta ,
+.Ic vi_delete_meta ,
+or
+.Ic vi_yank .
+It is an error if the cursor is already at the end of the edit
+buffer.
+.It Ic vi-history-word Pq vi command: _
+Insert the first word from the most recent history entry after the
+cursor, move the cursor after to the character after the inserted
+word, and switch to vi insert mode.
+It is an error if there is no history entry or the most recent
+history entry is empty.
+.It Ic vi-insert Pq vi command: i
+Enter insert mode.
+.It Ic vi-insert-at-bol Pq vi command: I
+Move the cursor to the beginning of the edit buffer and switch to
+vi insert mode.
+.It Ic vi-kill-line-prev Pq vi: Ctrl-U
+Delete the string from the beginning of the edit buffer to the
+cursor and save it to the cut buffer.
+.It Ic vi-list-or-eof Pq vi insert: Ctrl-D, EOF
+If the edit buffer is empty, indicate end of file to the program.
+It is an error if the edit buffer is not empty.
+.It Ic vi-match Pq vi command: %
+Consider opening and closing parentheses, braces, and brackets as
+delimiters.
+If the cursor is not at a delimiter, move it to the right until it
+gets to one, then move it to the matching delimiter.
+Can be used as a movement command after
+.Ic vi_change_meta ,
+.Ic vi_delete_meta ,
+or
+.Ic vi_yank .
+It is an error if there is no delimiter at the cursor or in the
+string to the right of the cursor, or if the first such delimiter
+has no matching delimiter.
+.It Ic vi-next-big-word Pq vi command: W
+Move the cursor to the right to the beginning of the next space
+delimited word.
+Can be used as a movement command after
+.Ic vi_change_meta ,
+.Ic vi_delete_meta ,
+or
+.Ic vi_yank .
+It is an error if the cursor is already at the end of the edit
+buffer or on its last character.
+.It Ic vi-next-char Pq vi command: f
+Read one character from the terminal bypassing the normal line
+editing functionality and move the cursor to the right to the next
+instance of that character in the edit buffer.
+Can be used as a movement command after
+.Ic vi_change_meta ,
+.Ic vi_delete_meta ,
+or
+.Ic vi_yank .
+If trying to read the character results in end of file or an error,
+call
+.Ic ed-end-of-file
+instead.
+It is an error if the character is not found searching to the right
+in the edit buffer.
+.It Ic vi-next-word Pq vi command: w
+Move the cursor to the right to the beginning of the next word.
+Can be used as a movement command after
+.Ic vi_change_meta ,
+.Ic vi_delete_meta ,
+or
+.Ic vi_yank .
+It is an error if the cursor is already at the end of the edit
+buffer or on its last character.
+.It Ic vi-paste-next Pq vi command: p
+Insert a copy of the cut buffer to the right of the cursor.
+It is an error if the cut buffer is empty.
+.It Ic vi-paste-prev Pq vi command: P
+Insert a copy of the cut buffer to the left of the cursor.
+It is an error if the cut buffer is empty.
+.It Ic vi-prev-big-word Pq vi command: B
+Move the cursor to the left to the next beginning of a space delimited
+word.
+Can be used as a movement command after
+.Ic vi_change_meta ,
+.Ic vi_delete_meta ,
+or
+.Ic vi_yank .
+It is an error if the cursor is already at the beginning of the
+edit buffer.
+.It Ic vi-prev-char Pq vi command: F
+Read one character from the terminal bypassing the normal line
+editing functionality and move the cursor to the left to the next
+instance of that character in the edit buffer.
+Can be used as a movement command after
+.Ic vi_change_meta ,
+.Ic vi_delete_meta ,
+or
+.Ic vi_yank .
+If trying to read the character results in end of file or an error,
+call
+.Ic ed-end-of-file
+instead.
+It is an error if the character is not found searching to the left
+in the edit buffer.
+.It Ic vi-prev-word Pq vi command: b
+Move the cursor to the left to the next beginning of a word.
+Can be used as a movement command after
+.Ic vi_change_meta ,
+.Ic vi_delete_meta ,
+or
+.Ic vi_yank .
+It is an error if the cursor is already at the beginning of the
+edit buffer.
+.It Ic vi-redo Pq vi command: Sq \&.
+Redo the last non-motion command.
+.It Ic vi-repeat-next-char Pq vi command: Sq \&;
+Repeat the most recent character search in the same search direction.
+Can be used as a movement command after
+.Ic vi_change_meta ,
+.Ic vi_delete_meta ,
+or
+.Ic vi_yank .
+.It Ic vi-repeat-prev-char Pq vi command: Sq \&,
+Repeat the most recent character search in the opposite search
+direction.
+Can be used as a movement command after
+.Ic vi_change_meta ,
+.Ic vi_delete_meta ,
+or
+.Ic vi_yank .
+.It Ic vi-repeat-search-next Pq vi command: n
+Repeat the most recent history search in the same search direction.
+.It Ic vi-repeat-search-prev Pq vi command: N
+Repeat the most recent history search in the opposite search
+direction.
+.It Ic vi-replace-char Pq vi command: r
+Switch to vi replace mode, and automatically switch back to vi
+command mode after the next character typed.
+See
+.Ic ed-insert
+for a description of replace mode.
+It is an error if the cursor is at the end of the edit buffer.
+.It Ic vi-replace-mode Pq vi command: R
+Switch to vi replace mode.
+This is a variant of vi insert mode; see
+.Ic ed-insert
+for the difference.
+.It Ic vi-search-next Pq vi command: \&?
+Replace the edit buffer with the next matching history entry.
+.It Ic vi-search-prev Pq vi command: /
+Replace the edit buffer with the previous matching history entry.
+.It Ic vi-substitute-char Pq vi command: s
+Delete the character at the cursor and switch to vi insert mode.
+.It Ic vi-substitute-line Pq vi command: S
+Delete the entire contents of the edit buffer, save a copy of it
+in the cut buffer, and enter vi insert mode.
+.It Ic vi-to-column Pq vi command: \&|
+Move the cursor to the column specified as the argument.
+Can be used as a movement command after
+.Ic vi_change_meta ,
+.Ic vi_delete_meta ,
+or
+.Ic vi_yank .
+.It Ic vi-to-history-line Pq vi command: G
+Replace the edit buffer with the specified history entry.
+.It Ic vi-to-next-char Pq vi command: t
+Read one character from the terminal bypassing the normal line
+editing functionality and move the cursor to the right to the
+character before the next instance of that character in the edit
+buffer.
+Can be used as a movement command after
+.Ic vi_change_meta ,
+.Ic vi_delete_meta ,
+or
+.Ic vi_yank .
+If trying to read the character results in end of file or an error,
+call
+.Ic ed-end-of-file
+instead.
+It is an error if the character is not found searching to the right
+in the edit buffer.
+.It Ic vi-to-prev-char Pq vi command: T
+Read one character from the terminal bypassing the normal line
+editing functionality and move the cursor to the left to the character
+after the next instance of that character in the edit buffer.
+Can be used as a movement command after
+.Ic vi_change_meta ,
+.Ic vi_delete_meta ,
+or
+.Ic vi_yank .
+If trying to read the character results in end of file or an error,
+call
+.Ic ed-end-of-file
+instead.
+It is an error if the character is not found searching to the left
+in the edit buffer.
+.It Ic vi-undo Pq vi command: u
+Undo the last change.
+.It Ic vi-undo-line Pq vi command: U
+Undo all changes to the edit buffer.
+.It Ic vi-yank Pq vi command: y
+Copy the string from the cursor to the position specified by the
+following movement command to the cut buffer.
+When given twice in a row, instead copy the whole contents of the
+edit buffer to the cut buffer.
+.It Ic vi-yank-end Pq vi command: Y
+Copy the string from the cursor to the end of the edit buffer to
+the cut buffer.
+.It Ic vi-zero Pq vi command: 0
+If in argument input mode, multiply the argument by ten.
+Otherwise, move the cursor to the beginning of the edit buffer.
+Can be used as a movement command after
+.Ic vi_change_meta ,
+.Ic vi_delete_meta ,
+or
+.Ic vi_yank .
+.El
+.Ss Macros
+If an input character is bound to the editor command
+.Ic ed-sequence-lead-in ,
+.Nm
+attempts to call a macro.
+If the input character by itself forms the name of a macro, that
+macro is executed.
+Otherwise, additional input characters are read until the string
+read forms the name of a macro, in which case that macro is executed,
+or until the string read matches the beginning of none of the existing
+macro names, in which case the string including the final, mismatching
+character is discarded and the terminal bell is rung.
+.Pp
+There are two kinds of macros.
+Command macros execute a single editor command.
+Keyboard macros return a string of characters that is appended
+as a new line to the
+.Sx Input Queue .
+.Pp
+The following command macros are defined by default in vi command
+mode and in emacs mode:
+.Bl -column -offset indent "Esc O A, Esc O A" "em-exchange-mark"
+.It Esc \&[ A, Esc O A Ta Ic ed-prev-history
+.It Esc \&[ B, Esc O B Ta Ic ed-next-history
+.It Esc \&[ C, Esc O C Ta Ic ed-next-char
+.It Esc \&[ D, Esc O D Ta Ic ed-prev-char
+.It Esc \&[ F, Esc O F Ta Ic ed-move-to-end
+.It Esc \&[ H, Esc O H Ta Ic ed-move-to-beg
+.El
+.Pp
+In vi command mode, they are also defined by default without the
+initial escape character.
+.Pp
+In addition, the
+.Nm
+library tries to bind the strings generated by the arrow keys
+as reported by the
+.Xr terminfo 5
+database to these editor commands, unless that would clobber
+user settings.
+.Pp
+In emacs mode, the two-character string
+.Dq Ctrl-X Ctrl-X
+is bound to the
+.Ic em-exchange-mark
+editor command.
+.Ss Input Queue
+The
+.Nm
+library maintains an input queue operated in FIFO mode.
+Whenever it needs an input character, it takes the first character
+from the first line of the input queue.
+When the queue is empty, it reads from the terminal.
+.Pp
+A line can be appended to the end of the input queue in several ways:
+.Bl -dash -offset indent
+.It
+By calling one of the keyboard
+.Sx Macros .
+.It
+By calling the editor command
+.Ic vi-redo .
+.It
+By calling the editor command
+.Ic vi-alias .
+.It
+By pressing a key in emacs incremental search mode that doesn't
+have a special meaning in that mode but returns to normal emacs
+mode.
+.It
+If an application program directly calls the functions
+.Xr el_push 3
+or
+.Xr el_wpush 3 ,
+it can provide additional, program-specific ways
+of appending to the input queue.
+.El
+.Sh SEE ALSO
+.Xr mg 1 ,
+.Xr vi 1 ,
+.Xr editline 3 ,
+.Xr el_wgets 3 ,
+.Xr el_wpush 3 ,
+.Xr el_wset 3 ,
+.Xr editrc 5
+.Sh HISTORY
+This manual page first appeared in
+.Ox 6.0
+and
+.Nx 8 .
+.Sh AUTHORS
+.An -nosplit
+This manual page was written by
+.An Ingo Schwarze Aq Mt schwarze@openbsd.org .
diff --git a/doc/editrc.5.roff b/doc/editrc.5.roff
index 643f459..fa41dbb 100644
--- a/doc/editrc.5.roff
+++ b/doc/editrc.5.roff
@@ -1,4 +1,4 @@
-.\" $NetBSD: editrc.5,v 1.27 2013/01/10 16:03:42 wiz Exp $
+.\" $NetBSD: editrc.5,v 1.33 2017/06/27 01:22:58 kre Exp $
.\"
.\" Copyright (c) 1997-2000 The NetBSD Foundation, Inc.
.\" All rights reserved.
@@ -26,7 +26,7 @@
.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
.\" POSSIBILITY OF SUCH DAMAGE.
.\"
-.Dd January 10, 2013
+.Dd May 22, 2016
.Dt EDITRC 5
.Os
.Sh NAME
@@ -42,7 +42,8 @@
library.
.Pp
The format of each line is:
-.Dl [prog:]command [arg [...]]
+.Pp
+.Dl [prog:]command [arg ...]
.Pp
.Ar command
is one of the
@@ -87,32 +88,26 @@
.Pp
The following builtin commands are available:
.Bl -tag -width 4n
-.It Ic bind Oo Fl a Oc Oo Fl e Oc Oo Fl k Oc Oo Fl l Oc Oo Fl r Oc \
-Oo Fl s Oc Oo Fl v Oc Oo Ar key Oo Ar command Oc Oc
-Without options, list all bound keys, and the editor command to which
-each is bound.
-If
+.It Ic bind Oo Fl aeklrsv Oc Op Ar key Op Ar command
+Without options and arguments, list all bound keys and macros, and
+the editor command or input string to which each one is bound.
+If only
.Ar key
-is supplied, show the bindings for
-.Ar key .
+is supplied, show the binding for that key or macro.
If
.Ar key command
-is supplied, bind
+is supplied, bind the editor
.Ar command
-to
-.Ar key .
-Options include:
+to that key or macro.
+.Pp
+The options are as follows:
.Bl -tag -width 4n
-.It Fl e
-Bind all keys to the standard GNU Emacs-like bindings.
-.It Fl v
-Bind all keys to the standard
-.Xr vi 1 Ns -like
-bindings.
.It Fl a
List or change key bindings in the
.Xr vi 1
mode alternate (command mode) key map.
+.It Fl e
+Bind all keys to the standard GNU Emacs-like bindings.
.It Fl k
.Ar key
is interpreted as a symbolic arrow key name, which may be one of
@@ -124,22 +119,28 @@
.It Fl l
List all editor commands and a short description of each.
.It Fl r
-Remove a key's binding.
+Remove the binding of the key or macro
+.Ar key .
.It Fl s
+Define a keyboard macro rather than a key binding or command macro:
.Ar command
-is taken as a literal string and treated as terminal input when
+is taken as a literal string and appended to the input queue whenever
.Ar key
is typed.
-Bound keys in
+Bound keys and macros in
.Ar command
are themselves reinterpreted, and this continues for ten levels of
interpretation.
+.It Fl v
+Bind all keys to the standard
+.Xr vi 1 Ns -like
+bindings.
.El
.Pp
-.Ar command
-may be one of the commands documented in
-.Sx "EDITOR COMMANDS"
-below, or another key.
+The
+.Xr editline 7
+manual documents all editor commands and contains more information
+about macros and the input queue.
.Pp
.Ar key
and
@@ -149,7 +150,7 @@
.Sq No ^ Ar character
.Sm on
.Po
-e.g.
+e.g.\&
.Sq ^A
.Pc ,
and the following backslashed escape sequences:
@@ -186,7 +187,7 @@
.Sq ^ .
.It Ic echotc Oo Fl sv Oc Ar arg Ar ...
Exercise terminal capabilities given in
-.Ar arg Ar ... .
+.Ar arg ... .
If
.Ar arg
is
@@ -230,9 +231,6 @@
If
.Dv n
is zero, then keep all entries (the default).
-.It Ic telltc
-List the values of all the terminal capabilities (see
-.Xr termcap 5 ) .
.It Ic settc Ar cap Ar val
Set the terminal capability
.Ar cap
@@ -291,208 +289,37 @@
is empty
then the character is set to
.Dv _POSIX_VDISABLE .
+.It Ic telltc
+List the values of all the terminal capabilities (see
+.Xr termcap 5 ) .
.El
-.Sh EDITOR COMMANDS
-The following editor commands are available for use in key bindings:
-.\" Section automatically generated with makelist
-.Bl -tag -width 4n
-.It Ic vi-paste-next
-Vi paste previous deletion to the right of the cursor.
-.It Ic vi-paste-prev
-Vi paste previous deletion to the left of the cursor.
-.It Ic vi-prev-space-word
-Vi move to the previous space delimited word.
-.It Ic vi-prev-word
-Vi move to the previous word.
-.It Ic vi-next-space-word
-Vi move to the next space delimited word.
-.It Ic vi-next-word
-Vi move to the next word.
-.It Ic vi-change-case
-Vi change case of character under the cursor and advance one character.
-.It Ic vi-change-meta
-Vi change prefix command.
-.It Ic vi-insert-at-bol
-Vi enter insert mode at the beginning of line.
-.It Ic vi-replace-char
-Vi replace character under the cursor with the next character typed.
-.It Ic vi-replace-mode
-Vi enter replace mode.
-.It Ic vi-substitute-char
-Vi replace character under the cursor and enter insert mode.
-.It Ic vi-substitute-line
-Vi substitute entire line.
-.It Ic vi-change-to-eol
-Vi change to end of line.
-.It Ic vi-insert
-Vi enter insert mode.
-.It Ic vi-add
-Vi enter insert mode after the cursor.
-.It Ic vi-add-at-eol
-Vi enter insert mode at end of line.
-.It Ic vi-delete-meta
-Vi delete prefix command.
-.It Ic vi-end-word
-Vi move to the end of the current space delimited word.
-.It Ic vi-to-end-word
-Vi move to the end of the current word.
-.It Ic vi-undo
-Vi undo last change.
-.It Ic vi-command-mode
-Vi enter command mode (use alternative key bindings).
-.It Ic vi-zero
-Vi move to the beginning of line.
-.It Ic vi-delete-prev-char
-Vi move to previous character (backspace).
-.It Ic vi-list-or-eof
-Vi list choices for completion or indicate end of file if empty line.
-.It Ic vi-kill-line-prev
-Vi cut from beginning of line to cursor.
-.It Ic vi-search-prev
-Vi search history previous.
-.It Ic vi-search-next
-Vi search history next.
-.It Ic vi-repeat-search-next
-Vi repeat current search in the same search direction.
-.It Ic vi-repeat-search-prev
-Vi repeat current search in the opposite search direction.
-.It Ic vi-next-char
-Vi move to the character specified next.
-.It Ic vi-prev-char
-Vi move to the character specified previous.
-.It Ic vi-to-next-char
-Vi move up to the character specified next.
-.It Ic vi-to-prev-char
-Vi move up to the character specified previous.
-.It Ic vi-repeat-next-char
-Vi repeat current character search in the same search direction.
-.It Ic vi-repeat-prev-char
-Vi repeat current character search in the opposite search direction.
-.It Ic em-delete-or-list
-Delete character under cursor or list completions if at end of line.
-.It Ic em-delete-next-word
-Cut from cursor to end of current word.
-.It Ic em-yank
-Paste cut buffer at cursor position.
-.It Ic em-kill-line
-Cut the entire line and save in cut buffer.
-.It Ic em-kill-region
-Cut area between mark and cursor and save in cut buffer.
-.It Ic em-copy-region
-Copy area between mark and cursor to cut buffer.
-.It Ic em-gosmacs-transpose
-Exchange the two characters before the cursor.
-.It Ic em-next-word
-Move next to end of current word.
-.It Ic em-upper-case
-Uppercase the characters from cursor to end of current word.
-.It Ic em-capitol-case
-Capitalize the characters from cursor to end of current word.
-.It Ic em-lower-case
-Lowercase the characters from cursor to end of current word.
-.It Ic em-set-mark
-Set the mark at cursor.
-.It Ic em-exchange-mark
-Exchange the cursor and mark.
-.It Ic em-universal-argument
-Universal argument (argument times 4).
-.It Ic em-meta-next
-Add 8th bit to next character typed.
-.It Ic em-toggle-overwrite
-Switch from insert to overwrite mode or vice versa.
-.It Ic em-copy-prev-word
-Copy current word to cursor.
-.It Ic em-inc-search-next
-Emacs incremental next search.
-.It Ic em-inc-search-prev
-Emacs incremental reverse search.
-.It Ic ed-end-of-file
-Indicate end of file.
-.It Ic ed-insert
-Add character to the line.
-.It Ic ed-delete-prev-word
-Delete from beginning of current word to cursor.
-.It Ic ed-delete-next-char
-Delete character under cursor.
-.It Ic ed-kill-line
-Cut to the end of line.
-.It Ic ed-move-to-end
-Move cursor to the end of line.
-.It Ic ed-move-to-beg
-Move cursor to the beginning of line.
-.It Ic ed-transpose-chars
-Exchange the character to the left of the cursor with the one under it.
-.It Ic ed-next-char
-Move to the right one character.
-.It Ic ed-prev-word
-Move to the beginning of the current word.
-.It Ic ed-prev-char
-Move to the left one character.
-.It Ic ed-quoted-insert
-Add the next character typed verbatim.
-.It Ic ed-digit
-Adds to argument or enters a digit.
-.It Ic ed-argument-digit
-Digit that starts argument.
-.It Ic ed-unassigned
-Indicates unbound character.
-.It Ic ed-tty-sigint
-Tty interrupt character.
-.It Ic ed-tty-dsusp
-Tty delayed suspend character.
-.It Ic ed-tty-flush-output
-Tty flush output characters.
-.It Ic ed-tty-sigquit
-Tty quit character.
-.It Ic ed-tty-sigtstp
-Tty suspend character.
-.It Ic ed-tty-stop-output
-Tty disallow output characters.
-.It Ic ed-tty-start-output
-Tty allow output characters.
-.It Ic ed-newline
-Execute command.
-.It Ic ed-delete-prev-char
-Delete the character to the left of the cursor.
-.It Ic ed-clear-screen
-Clear screen leaving current line at the top.
-.It Ic ed-redisplay
-Redisplay everything.
-.It Ic ed-start-over
-Erase current line and start from scratch.
-.It Ic ed-sequence-lead-in
-First character in a bound sequence.
-.It Ic ed-prev-history
-Move to the previous history line.
-.It Ic ed-next-history
-Move to the next history line.
-.It Ic ed-search-prev-history
-Search previous in history for a line matching the current.
-.It Ic ed-search-next-history
-Search next in history for a line matching the current.
-.It Ic ed-prev-line
-Move up one line.
-.It Ic ed-next-line
-Move down one line.
-.It Ic ed-command
-Editline extended command.
+.Sh ENVIRONMENT
+.Bl -tag -width "~/.editrcXXX"
+.It Ev EDITRC
+Names the default configuration file for the
+.Xr editline 3
+library.
.El
-.\" End of section automatically generated with makelist
.Sh FILES
.Bl -tag -width "~/.editrcXXX"
.It Pa ~/.editrc
-User configuration file for the
+Last resort, if no other file is specified,
+user configuration file for the
.Xr editline 3
library.
.El
.Sh SEE ALSO
.Xr editline 3 ,
.Xr regex 3 ,
-.Xr termcap 5
+.Xr termcap 5 ,
+.Xr editline 7
.Sh AUTHORS
+.An -nosplit
The
.Nm editline
-library was written by Christos Zoulas,
-and this manual was written by Luke Mewburn,
+library was written by
+.An Christos Zoulas ,
+and this manual was written by
+.An Luke Mewburn ,
with some sections inspired by
.Xr tcsh 1 .
diff --git a/examples/Makefile.am b/examples/Makefile.am
index a5c1950..3b50a89 100644
--- a/examples/Makefile.am
+++ b/examples/Makefile.am
@@ -7,8 +7,6 @@
tc1_SOURCES = tc1.c
fileman_SOURCES = fileman.c
-if WIDECHAR
noinst_PROGRAMS += wtc1
wtc1_SOURCES = wtc1.c
-endif
diff --git a/examples/Makefile.in b/examples/Makefile.in
index 31b47f7..4f02cc3 100644
--- a/examples/Makefile.in
+++ b/examples/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.14 from Makefile.am.
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -15,7 +15,17 @@
@SET_MAKE@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
@@ -78,11 +88,8 @@
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
-noinst_PROGRAMS = tc1$(EXEEXT) fileman$(EXEEXT) $(am__EXEEXT_1)
-@WIDECHAR_TRUE@am__append_1 = wtc1
+noinst_PROGRAMS = tc1$(EXEEXT) fileman$(EXEEXT) wtc1$(EXEEXT)
subdir = examples
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/depcomp
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -90,11 +97,11 @@
$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
-@WIDECHAR_TRUE@am__EXEEXT_1 = wtc1$(EXEEXT)
PROGRAMS = $(noinst_PROGRAMS)
am_fileman_OBJECTS = fileman.$(OBJEXT)
fileman_OBJECTS = $(am_fileman_OBJECTS)
@@ -108,8 +115,7 @@
tc1_OBJECTS = $(am_tc1_OBJECTS)
tc1_LDADD = $(LDADD)
tc1_DEPENDENCIES = $(top_builddir)/src/libedit.la
-am__wtc1_SOURCES_DIST = wtc1.c
-@WIDECHAR_TRUE@am_wtc1_OBJECTS = wtc1.$(OBJEXT)
+am_wtc1_OBJECTS = wtc1.$(OBJEXT)
wtc1_OBJECTS = $(am_wtc1_OBJECTS)
wtc1_LDADD = $(LDADD)
wtc1_DEPENDENCIES = $(top_builddir)/src/libedit.la
@@ -127,7 +133,9 @@
am__v_at_1 =
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/fileman.Po ./$(DEPDIR)/tc1.Po \
+ ./$(DEPDIR)/wtc1.Po
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
@@ -148,8 +156,7 @@
am__v_CCLD_0 = @echo " CCLD " $@;
am__v_CCLD_1 =
SOURCES = $(fileman_SOURCES) $(tc1_SOURCES) $(wtc1_SOURCES)
-DIST_SOURCES = $(fileman_SOURCES) $(tc1_SOURCES) \
- $(am__wtc1_SOURCES_DIST)
+DIST_SOURCES = $(fileman_SOURCES) $(tc1_SOURCES) $(wtc1_SOURCES)
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
@@ -174,6 +181,7 @@
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
@@ -214,6 +222,7 @@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
LT_VERSION = @LT_VERSION@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -296,7 +305,7 @@
AM_CFLAGS = -I$(top_srcdir)/src
tc1_SOURCES = tc1.c
fileman_SOURCES = fileman.c
-@WIDECHAR_TRUE@wtc1_SOURCES = wtc1.c
+wtc1_SOURCES = wtc1.c
all: all-am
.SUFFIXES:
@@ -310,17 +319,16 @@
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign examples/Makefile'; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu examples/Makefile'; \
$(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign examples/Makefile
-.PRECIOUS: Makefile
+ $(AUTOMAKE) --gnu examples/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -359,9 +367,15 @@
distclean-compile:
-rm -f *.tab.c
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fileman.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tc1.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wtc1.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fileman.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tc1.Po@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wtc1.Po@am__quote@ # am--include-marker
+
+$(am__depfiles_remade):
+ @$(MKDIR_P) $(@D)
+ @echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)
.c.o:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@@ -442,7 +456,10 @@
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-distdir: $(DISTFILES)
+distdir: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
@@ -512,7 +529,9 @@
mostlyclean-am
distclean: distclean-am
- -rm -rf ./$(DEPDIR)
+ -rm -f ./$(DEPDIR)/fileman.Po
+ -rm -f ./$(DEPDIR)/tc1.Po
+ -rm -f ./$(DEPDIR)/wtc1.Po
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-tags
@@ -558,7 +577,9 @@
installcheck-am:
maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
+ -rm -f ./$(DEPDIR)/fileman.Po
+ -rm -f ./$(DEPDIR)/tc1.Po
+ -rm -f ./$(DEPDIR)/wtc1.Po
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
@@ -579,9 +600,9 @@
.MAKE: install-am install-strip
-.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \
- clean-libtool clean-noinstPROGRAMS cscopelist-am ctags \
- ctags-am distclean distclean-compile distclean-generic \
+.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \
+ clean-generic clean-libtool clean-noinstPROGRAMS cscopelist-am \
+ ctags ctags-am distclean distclean-compile distclean-generic \
distclean-libtool distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-dvi install-dvi-am install-exec \
@@ -593,6 +614,8 @@
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags tags-am uninstall uninstall-am
+.PRECIOUS: Makefile
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
diff --git a/examples/fileman.c b/examples/fileman.c
index 2d1a0d4..974a7cc 100644
--- a/examples/fileman.c
+++ b/examples/fileman.c
@@ -3,7 +3,7 @@
to manipulate files and their modes.
NOTE: this was taken from the GNU Readline documentation and ported
- to libedit. A commad to output the history list was added.
+ to libedit. A command to output the history list was added.
*/
@@ -251,7 +251,7 @@
directory. */
if (start == 0)
/* TODO */
- matches = completion_matches (text, command_generator);
+ matches = completion_matches ((char*)text, command_generator);
/* matches = rl_completion_matches (text, command_generator); */
return (matches);
@@ -328,10 +328,10 @@
HIST_ENTRY *he;
/* rewind history */
- while (next_history())
+ while (previous_history())
;
- for (he = current_history(); he != NULL; he = previous_history()) {
+ for (he = current_history(); he != NULL; he = next_history()) {
//printf("%5d %s\n", *((int*)he->data) - 1, he->line);
printf("%s\n", he->line);
}
diff --git a/examples/tc1.c b/examples/tc1.c
index 086dc3e..3061038 100644
--- a/examples/tc1.c
+++ b/examples/tc1.c
@@ -1,4 +1,4 @@
-/* $NetBSD: tc1.c,v 1.5 2010/04/18 21:17:47 christos Exp $ */
+/* $NetBSD: tc1.c,v 1.7 2016/02/17 19:47:49 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -42,7 +42,7 @@
#if 0
static char sccsid[] = "@(#)test.c 8.1 (Berkeley) 6/4/93";
#else
-__RCSID("$NetBSD: tc1.c,v 1.5 2010/04/18 21:17:47 christos Exp $");
+__RCSID("$NetBSD: tc1.c,v 1.7 2016/02/17 19:47:49 christos Exp $");
#endif
#endif /* not lint && not SCCSID */
@@ -54,15 +54,15 @@
/*
* test.c: A little test program
*/
-#include <stdio.h>
-#include <string.h>
-#include <signal.h>
#include <sys/wait.h>
#include <ctype.h>
-#include <stdlib.h>
-#include <unistd.h>
#include <dirent.h>
#include <locale.h>
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
#include "histedit.h"
@@ -162,7 +162,7 @@
/* Add a user-defined function */
el_set(el, EL_ADDFN, "ed-complete", "Complete argument", complete);
- /* Bind tab to it */
+ /* Bind tab to it */
el_set(el, EL_BIND, "^I", "ed-complete", NULL);
/*
@@ -194,7 +194,7 @@
#endif
if (gotsig) {
- (void) fprintf(stderr, "Got signal %d.\n", gotsig);
+ (void) fprintf(stderr, "Got signal %d.\n", (int)gotsig);
gotsig = 0;
el_reset(el);
}
diff --git a/examples/wtc1.c b/examples/wtc1.c
index 28372a8..74be5f0 100644
--- a/examples/wtc1.c
+++ b/examples/wtc1.c
@@ -1,14 +1,14 @@
-#include <stdio.h>
-#include <string.h>
-#include <signal.h>
#include <sys/wait.h>
-#include <err.h>
#include <ctype.h>
-#include <stdlib.h>
-#include <unistd.h>
#include <dirent.h>
+#include <err.h>
#include <limits.h>
#include <locale.h>
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
#include <histedit.h>
@@ -170,7 +170,7 @@
#endif
if (gotsig) {
- (void)fprintf(stderr, "Got signal %d.\n", gotsig);
+ (void)fprintf(stderr, "Got signal %d.\n", (int)gotsig);
gotsig = 0;
el_reset(el);
}
diff --git a/install-sh b/install-sh
index 377bb86..8175c64 100755
--- a/install-sh
+++ b/install-sh
@@ -1,7 +1,7 @@
#!/bin/sh
# install - install a program, script, or datafile
-scriptversion=2011-11-20.07; # UTC
+scriptversion=2018-03-11.20; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
@@ -41,19 +41,15 @@
# This script is compatible with the BSD install script, but was written
# from scratch.
+tab=' '
nl='
'
-IFS=" "" $nl"
+IFS=" $tab$nl"
-# set DOITPROG to echo to test this script
+# Set DOITPROG to "echo" to test this script.
-# Don't use :- since 4.3BSD and earlier shells don't like it.
doit=${DOITPROG-}
-if test -z "$doit"; then
- doit_exec=exec
-else
- doit_exec=$doit
-fi
+doit_exec=${doit:-exec}
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
@@ -68,17 +64,6 @@
rmprog=${RMPROG-rm}
stripprog=${STRIPPROG-strip}
-posix_glob='?'
-initialize_posix_glob='
- test "$posix_glob" != "?" || {
- if (set -f) 2>/dev/null; then
- posix_glob=
- else
- posix_glob=:
- fi
- }
-'
-
posix_mkdir=
# Desired mode of installed file.
@@ -97,7 +82,7 @@
dst_arg=
copy_on_change=false
-no_target_directory=
+is_target_a_directory=possibly
usage="\
Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
@@ -137,46 +122,57 @@
-d) dir_arg=true;;
-g) chgrpcmd="$chgrpprog $2"
- shift;;
+ shift;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
- case $mode in
- *' '* | *' '* | *'
-'* | *'*'* | *'?'* | *'['*)
- echo "$0: invalid mode: $mode" >&2
- exit 1;;
- esac
- shift;;
+ case $mode in
+ *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
-o) chowncmd="$chownprog $2"
- shift;;
+ shift;;
-s) stripcmd=$stripprog;;
- -t) dst_arg=$2
- # Protect names problematic for 'test' and other utilities.
- case $dst_arg in
- -* | [=\(\)!]) dst_arg=./$dst_arg;;
- esac
- shift;;
+ -t)
+ is_target_a_directory=always
+ dst_arg=$2
+ # Protect names problematic for 'test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ shift;;
- -T) no_target_directory=true;;
+ -T) is_target_a_directory=never;;
--version) echo "$0 $scriptversion"; exit $?;;
- --) shift
- break;;
+ --) shift
+ break;;
- -*) echo "$0: invalid option: $1" >&2
- exit 1;;
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
*) break;;
esac
shift
done
+# We allow the use of options -d and -T together, by making -d
+# take the precedence; this is for compatibility with GNU install.
+
+if test -n "$dir_arg"; then
+ if test -n "$dst_arg"; then
+ echo "$0: target directory not allowed when installing a directory." >&2
+ exit 1
+ fi
+fi
+
if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
# When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
@@ -208,6 +204,15 @@
fi
if test -z "$dir_arg"; then
+ if test $# -gt 1 || test "$is_target_a_directory" = always; then
+ if test ! -d "$dst_arg"; then
+ echo "$0: $dst_arg: Is not a directory." >&2
+ exit 1
+ fi
+ fi
+fi
+
+if test -z "$dir_arg"; then
do_exit='(exit $ret); exit $ret'
trap "ret=129; $do_exit" 1
trap "ret=130; $do_exit" 2
@@ -223,16 +228,16 @@
*[0-7])
if test -z "$stripcmd"; then
- u_plus_rw=
+ u_plus_rw=
else
- u_plus_rw='% 200'
+ u_plus_rw='% 200'
fi
cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
*)
if test -z "$stripcmd"; then
- u_plus_rw=
+ u_plus_rw=
else
- u_plus_rw=,u+rw
+ u_plus_rw=,u+rw
fi
cp_umask=$mode$u_plus_rw;;
esac
@@ -266,122 +271,113 @@
fi
dst=$dst_arg
- # If destination is a directory, append the input filename; won't work
- # if double slashes aren't ignored.
+ # If destination is a directory, append the input filename.
if test -d "$dst"; then
- if test -n "$no_target_directory"; then
- echo "$0: $dst_arg: Is a directory" >&2
- exit 1
+ if test "$is_target_a_directory" = never; then
+ echo "$0: $dst_arg: Is a directory" >&2
+ exit 1
fi
dstdir=$dst
- dst=$dstdir/`basename "$src"`
+ dstbase=`basename "$src"`
+ case $dst in
+ */) dst=$dst$dstbase;;
+ *) dst=$dst/$dstbase;;
+ esac
dstdir_status=0
else
- # Prefer dirname, but fall back on a substitute if dirname fails.
- dstdir=`
- (dirname "$dst") 2>/dev/null ||
- expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
- X"$dst" : 'X\(//\)[^/]' \| \
- X"$dst" : 'X\(//\)$' \| \
- X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
- echo X"$dst" |
- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
- s//\1/
- q
- }
- /^X\(\/\/\)[^/].*/{
- s//\1/
- q
- }
- /^X\(\/\/\)$/{
- s//\1/
- q
- }
- /^X\(\/\).*/{
- s//\1/
- q
- }
- s/.*/./; q'
- `
-
+ dstdir=`dirname "$dst"`
test -d "$dstdir"
dstdir_status=$?
fi
fi
+ case $dstdir in
+ */) dstdirslash=$dstdir;;
+ *) dstdirslash=$dstdir/;;
+ esac
+
obsolete_mkdir_used=false
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
- # Create intermediate dirs using mode 755 as modified by the umask.
- # This is like FreeBSD 'install' as of 1997-10-28.
- umask=`umask`
- case $stripcmd.$umask in
- # Optimize common cases.
- *[2367][2367]) mkdir_umask=$umask;;
- .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+ # Create intermediate dirs using mode 755 as modified by the umask.
+ # This is like FreeBSD 'install' as of 1997-10-28.
+ umask=`umask`
+ case $stripcmd.$umask in
+ # Optimize common cases.
+ *[2367][2367]) mkdir_umask=$umask;;
+ .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
- *[0-7])
- mkdir_umask=`expr $umask + 22 \
- - $umask % 100 % 40 + $umask % 20 \
- - $umask % 10 % 4 + $umask % 2
- `;;
- *) mkdir_umask=$umask,go-w;;
- esac
+ *[0-7])
+ mkdir_umask=`expr $umask + 22 \
+ - $umask % 100 % 40 + $umask % 20 \
+ - $umask % 10 % 4 + $umask % 2
+ `;;
+ *) mkdir_umask=$umask,go-w;;
+ esac
- # With -d, create the new directory with the user-specified mode.
- # Otherwise, rely on $mkdir_umask.
- if test -n "$dir_arg"; then
- mkdir_mode=-m$mode
- else
- mkdir_mode=
- fi
+ # With -d, create the new directory with the user-specified mode.
+ # Otherwise, rely on $mkdir_umask.
+ if test -n "$dir_arg"; then
+ mkdir_mode=-m$mode
+ else
+ mkdir_mode=
+ fi
- posix_mkdir=false
- case $umask in
- *[123567][0-7][0-7])
- # POSIX mkdir -p sets u+wx bits regardless of umask, which
- # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
- ;;
- *)
- tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+ posix_mkdir=false
+ case $umask in
+ *[123567][0-7][0-7])
+ # POSIX mkdir -p sets u+wx bits regardless of umask, which
+ # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+ ;;
+ *)
+ # Note that $RANDOM variable is not portable (e.g. dash); Use it
+ # here however when possible just to lower collision chance.
+ tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
- if (umask $mkdir_umask &&
- exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
- then
- if test -z "$dir_arg" || {
- # Check for POSIX incompatibilities with -m.
- # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
- # other-writable bit of parent directory when it shouldn't.
- # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
- ls_ld_tmpdir=`ls -ld "$tmpdir"`
- case $ls_ld_tmpdir in
- d????-?r-*) different_mode=700;;
- d????-?--*) different_mode=755;;
- *) false;;
- esac &&
- $mkdirprog -m$different_mode -p -- "$tmpdir" && {
- ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
- test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
- }
- }
- then posix_mkdir=:
- fi
- rmdir "$tmpdir/d" "$tmpdir"
- else
- # Remove any dirs left behind by ancient mkdir implementations.
- rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
- fi
- trap '' 0;;
- esac;;
+ trap 'ret=$?; rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+ # Because "mkdir -p" follows existing symlinks and we likely work
+ # directly in world-writeable /tmp, make sure that the '$tmpdir'
+ # directory is successfully created first before we actually test
+ # 'mkdir -p' feature.
+ if (umask $mkdir_umask &&
+ $mkdirprog $mkdir_mode "$tmpdir" &&
+ exec $mkdirprog $mkdir_mode -p -- "$tmpdir/a/b") >/dev/null 2>&1
+ then
+ if test -z "$dir_arg" || {
+ # Check for POSIX incompatibilities with -m.
+ # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+ # other-writable bit of parent directory when it shouldn't.
+ # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+ test_tmpdir="$tmpdir/a"
+ ls_ld_tmpdir=`ls -ld "$test_tmpdir"`
+ case $ls_ld_tmpdir in
+ d????-?r-*) different_mode=700;;
+ d????-?--*) different_mode=755;;
+ *) false;;
+ esac &&
+ $mkdirprog -m$different_mode -p -- "$test_tmpdir" && {
+ ls_ld_tmpdir_1=`ls -ld "$test_tmpdir"`
+ test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+ }
+ }
+ then posix_mkdir=:
+ fi
+ rmdir "$tmpdir/a/b" "$tmpdir/a" "$tmpdir"
+ else
+ # Remove any dirs left behind by ancient mkdir implementations.
+ rmdir ./$mkdir_mode ./-p ./-- "$tmpdir" 2>/dev/null
+ fi
+ trap '' 0;;
+ esac;;
esac
if
$posix_mkdir && (
- umask $mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+ umask $mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
)
then :
else
@@ -391,53 +387,51 @@
# directory the slow way, step by step, checking for races as we go.
case $dstdir in
- /*) prefix='/';;
- [-=\(\)!]*) prefix='./';;
- *) prefix='';;
+ /*) prefix='/';;
+ [-=\(\)!]*) prefix='./';;
+ *) prefix='';;
esac
- eval "$initialize_posix_glob"
-
oIFS=$IFS
IFS=/
- $posix_glob set -f
+ set -f
set fnord $dstdir
shift
- $posix_glob set +f
+ set +f
IFS=$oIFS
prefixes=
for d
do
- test X"$d" = X && continue
+ test X"$d" = X && continue
- prefix=$prefix$d
- if test -d "$prefix"; then
- prefixes=
- else
- if $posix_mkdir; then
- (umask=$mkdir_umask &&
- $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
- # Don't fail if two instances are running concurrently.
- test -d "$prefix" || exit 1
- else
- case $prefix in
- *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
- *) qprefix=$prefix;;
- esac
- prefixes="$prefixes '$qprefix'"
- fi
- fi
- prefix=$prefix/
+ prefix=$prefix$d
+ if test -d "$prefix"; then
+ prefixes=
+ else
+ if $posix_mkdir; then
+ (umask=$mkdir_umask &&
+ $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+ # Don't fail if two instances are running concurrently.
+ test -d "$prefix" || exit 1
+ else
+ case $prefix in
+ *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+ *) qprefix=$prefix;;
+ esac
+ prefixes="$prefixes '$qprefix'"
+ fi
+ fi
+ prefix=$prefix/
done
if test -n "$prefixes"; then
- # Don't fail if two instances are running concurrently.
- (umask $mkdir_umask &&
- eval "\$doit_exec \$mkdirprog $prefixes") ||
- test -d "$dstdir" || exit 1
- obsolete_mkdir_used=true
+ # Don't fail if two instances are running concurrently.
+ (umask $mkdir_umask &&
+ eval "\$doit_exec \$mkdirprog $prefixes") ||
+ test -d "$dstdir" || exit 1
+ obsolete_mkdir_used=true
fi
fi
fi
@@ -450,8 +444,8 @@
else
# Make a couple of temp file names in the proper directory.
- dsttmp=$dstdir/_inst.$$_
- rmtmp=$dstdir/_rm.$$_
+ dsttmp=${dstdirslash}_inst.$$_
+ rmtmp=${dstdirslash}_rm.$$_
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
@@ -472,15 +466,12 @@
# If -C, don't bother to copy if it wouldn't change the file.
if $copy_on_change &&
- old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
- new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
-
- eval "$initialize_posix_glob" &&
- $posix_glob set -f &&
+ old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
+ new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
+ set -f &&
set X $old && old=:$2:$4:$5:$6 &&
set X $new && new=:$2:$4:$5:$6 &&
- $posix_glob set +f &&
-
+ set +f &&
test "$old" = "$new" &&
$cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
then
@@ -493,24 +484,24 @@
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
{
- # Now remove or move aside any old file at destination location.
- # We try this two ways since rm can't unlink itself on some
- # systems and the destination file might be busy for other
- # reasons. In this case, the final cleanup might fail but the new
- # file should still install successfully.
- {
- test ! -f "$dst" ||
- $doit $rmcmd -f "$dst" 2>/dev/null ||
- { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
- { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
- } ||
- { echo "$0: cannot unlink or rename $dst" >&2
- (exit 1); exit 1
- }
- } &&
+ # Now remove or move aside any old file at destination location.
+ # We try this two ways since rm can't unlink itself on some
+ # systems and the destination file might be busy for other
+ # reasons. In this case, the final cleanup might fail but the new
+ # file should still install successfully.
+ {
+ test ! -f "$dst" ||
+ $doit $rmcmd -f "$dst" 2>/dev/null ||
+ { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+ { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+ } ||
+ { echo "$0: cannot unlink or rename $dst" >&2
+ (exit 1); exit 1
+ }
+ } &&
- # Now rename the file to the real destination.
- $doit $mvcmd "$dsttmp" "$dst"
+ # Now rename the file to the real destination.
+ $doit $mvcmd "$dsttmp" "$dst"
}
fi || exit 1
@@ -519,9 +510,9 @@
done
# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
+# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
+# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
diff --git a/libedit.pc.in b/libedit.pc.in
index deaaa39..1fb2f05 100644
--- a/libedit.pc.in
+++ b/libedit.pc.in
@@ -7,6 +7,7 @@
Description: command line editor library provides generic line editing, history, and tokenization functions.
Version: @VERSION@
Requires:
-Libs: -L${libdir} -ledit @LIBS@
+Libs: -L${libdir} -ledit
+Libs.private: @LIBS@
Cflags: -I${includedir} -I${includedir}/editline
diff --git a/ltmain.sh b/ltmain.sh
index 63ae69d..0f0a2da 100644
--- a/ltmain.sh
+++ b/ltmain.sh
@@ -1,9 +1,12 @@
+#! /bin/sh
+## DO NOT EDIT - This file generated from ./build-aux/ltmain.in
+## by inline-source v2014-01-03.01
-# libtool (GNU libtool) 2.4.2
+# libtool (GNU libtool) 2.4.6
+# Provide generalized library-building support services.
# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
-# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+# Copyright (C) 1996-2015 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions. There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
@@ -23,166 +26,670 @@
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING. If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html,
-# or obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
-# Usage: $progname [OPTION]... [MODE-ARG]...
-#
-# Provide generalized library-building support services.
-#
-# --config show all configuration variables
-# --debug enable verbose shell tracing
-# -n, --dry-run display commands without modifying any files
-# --features display basic configuration information and exit
-# --mode=MODE use operation mode MODE
-# --preserve-dup-deps don't remove duplicate dependency libraries
-# --quiet, --silent don't print informational messages
-# --no-quiet, --no-silent
-# print informational messages (default)
-# --no-warn don't display warning messages
-# --tag=TAG use configuration variables from tag TAG
-# -v, --verbose print more informational messages than default
-# --no-verbose don't print the extra informational messages
-# --version print version information
-# -h, --help, --help-all print short, long, or detailed help message
-#
-# MODE must be one of the following:
-#
-# clean remove files from the build directory
-# compile compile a source file into a libtool object
-# execute automatically set library path, then run a program
-# finish complete the installation of libtool libraries
-# install install libraries or executables
-# link create a library or an executable
-# uninstall remove libraries from an installed directory
-#
-# MODE-ARGS vary depending on the MODE. When passed as first option,
-# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
-# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
-#
-# When reporting a bug, please describe a test case to reproduce it and
-# include the following information:
-#
-# host-triplet: $host
-# shell: $SHELL
-# compiler: $LTCC
-# compiler flags: $LTCFLAGS
-# linker: $LD (gnu? $with_gnu_ld)
-# $progname: (GNU libtool) 2.4.2
-# automake: $automake_version
-# autoconf: $autoconf_version
-#
-# Report bugs to <bug-libtool@gnu.org>.
-# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
-# General help using GNU software: <http://www.gnu.org/gethelp/>.
PROGRAM=libtool
PACKAGE=libtool
-VERSION=2.4.2
-TIMESTAMP=""
-package_revision=1.3337
+VERSION=2.4.6
+package_revision=2.4.6
-# Be Bourne compatible
-if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Run './libtool --help' for help with using this script from the
+# command line.
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# After configure completes, it has a better idea of some of the
+# shell tools we need than the defaults used by the functions shared
+# with bootstrap, so set those here where they can still be over-
+# ridden by the user, but otherwise take precedence.
+
+: ${AUTOCONF="autoconf"}
+: ${AUTOMAKE="automake"}
+
+
+## -------------------------- ##
+## Source external libraries. ##
+## -------------------------- ##
+
+# Much of our low-level functionality needs to be sourced from external
+# libraries, which are installed to $pkgauxdir.
+
+# Set a version string for this script.
+scriptversion=2015-01-20.17; # UTC
+
+# General shell script boiler plate, and helper functions.
+# Written by Gary V. Vaughan, 2004
+
+# Copyright (C) 2004-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+
+# As a special exception to the GNU General Public License, if you distribute
+# this file as part of a program or library that is built using GNU Libtool,
+# you may include this file under the same distribution terms that you use
+# for the rest of that program.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNES FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# Evaluate this file near the top of your script to gain access to
+# the functions and variables defined here:
+#
+# . `echo "$0" | ${SED-sed} 's|[^/]*$||'`/build-aux/funclib.sh
+#
+# If you need to override any of the default environment variable
+# settings, do that before evaluating this file.
+
+
+## -------------------- ##
+## Shell normalisation. ##
+## -------------------- ##
+
+# Some shells need a little help to be as Bourne compatible as possible.
+# Before doing anything else, make sure all that help has been provided!
+
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
emulate sh
NULLCMD=:
- # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+ case `(set -o) 2>/dev/null` in *posix*) set -o posix ;; esac
fi
-BIN_SH=xpg4; export BIN_SH # for Tru64
-DUALCASE=1; export DUALCASE # for MKS sh
-# A function that is used when there is no print builtin or printf.
-func_fallback_echo ()
-{
- eval 'cat <<_LTECHO_EOF
-$1
-_LTECHO_EOF'
-}
-
-# NLS nuisances: We save the old values to restore during execute mode.
-lt_user_locale=
-lt_safe_locale=
-for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+# NLS nuisances: We save the old values in case they are required later.
+_G_user_locale=
+_G_safe_locale=
+for _G_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
do
- eval "if test \"\${$lt_var+set}\" = set; then
- save_$lt_var=\$$lt_var
- $lt_var=C
- export $lt_var
- lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
- lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+ eval "if test set = \"\${$_G_var+set}\"; then
+ save_$_G_var=\$$_G_var
+ $_G_var=C
+ export $_G_var
+ _G_user_locale=\"$_G_var=\\\$save_\$_G_var; \$_G_user_locale\"
+ _G_safe_locale=\"$_G_var=C; \$_G_safe_locale\"
fi"
done
-LC_ALL=C
-LANGUAGE=C
-export LANGUAGE LC_ALL
-$lt_unset CDPATH
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+# Make sure IFS has a sensible default
+sp=' '
+nl='
+'
+IFS="$sp $nl"
+
+# There are apparently some retarded systems that use ';' as a PATH separator!
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+
+## ------------------------- ##
+## Locate command utilities. ##
+## ------------------------- ##
+
+
+# func_executable_p FILE
+# ----------------------
+# Check that FILE is an executable regular file.
+func_executable_p ()
+{
+ test -f "$1" && test -x "$1"
+}
+
+
+# func_path_progs PROGS_LIST CHECK_FUNC [PATH]
+# --------------------------------------------
+# Search for either a program that responds to --version with output
+# containing "GNU", or else returned by CHECK_FUNC otherwise, by
+# trying all the directories in PATH with each of the elements of
+# PROGS_LIST.
+#
+# CHECK_FUNC should accept the path to a candidate program, and
+# set $func_check_prog_result if it truncates its output less than
+# $_G_path_prog_max characters.
+func_path_progs ()
+{
+ _G_progs_list=$1
+ _G_check_func=$2
+ _G_PATH=${3-"$PATH"}
+
+ _G_path_prog_max=0
+ _G_path_prog_found=false
+ _G_save_IFS=$IFS; IFS=${PATH_SEPARATOR-:}
+ for _G_dir in $_G_PATH; do
+ IFS=$_G_save_IFS
+ test -z "$_G_dir" && _G_dir=.
+ for _G_prog_name in $_G_progs_list; do
+ for _exeext in '' .EXE; do
+ _G_path_prog=$_G_dir/$_G_prog_name$_exeext
+ func_executable_p "$_G_path_prog" || continue
+ case `"$_G_path_prog" --version 2>&1` in
+ *GNU*) func_path_progs_result=$_G_path_prog _G_path_prog_found=: ;;
+ *) $_G_check_func $_G_path_prog
+ func_path_progs_result=$func_check_prog_result
+ ;;
+ esac
+ $_G_path_prog_found && break 3
+ done
+ done
+ done
+ IFS=$_G_save_IFS
+ test -z "$func_path_progs_result" && {
+ echo "no acceptable sed could be found in \$PATH" >&2
+ exit 1
+ }
+}
+
+
+# We want to be able to use the functions in this file before configure
+# has figured out where the best binaries are kept, which means we have
+# to search for them ourselves - except when the results are already set
+# where we skip the searches.
+
+# Unless the user overrides by setting SED, search the path for either GNU
+# sed, or the sed that truncates its output the least.
+test -z "$SED" && {
+ _G_sed_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/
+ for _G_i in 1 2 3 4 5 6 7; do
+ _G_sed_script=$_G_sed_script$nl$_G_sed_script
+ done
+ echo "$_G_sed_script" 2>/dev/null | sed 99q >conftest.sed
+ _G_sed_script=
+
+ func_check_prog_sed ()
+ {
+ _G_path_prog=$1
+
+ _G_count=0
+ printf 0123456789 >conftest.in
+ while :
+ do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo '' >> conftest.nl
+ "$_G_path_prog" -f conftest.sed <conftest.nl >conftest.out 2>/dev/null || break
+ diff conftest.out conftest.nl >/dev/null 2>&1 || break
+ _G_count=`expr $_G_count + 1`
+ if test "$_G_count" -gt "$_G_path_prog_max"; then
+ # Best one so far, save it but keep looking for a better one
+ func_check_prog_result=$_G_path_prog
+ _G_path_prog_max=$_G_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test 10 -lt "$_G_count" && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out
+ }
+
+ func_path_progs "sed gsed" func_check_prog_sed $PATH:/usr/xpg4/bin
+ rm -f conftest.sed
+ SED=$func_path_progs_result
+}
+
+
+# Unless the user overrides by setting GREP, search the path for either GNU
+# grep, or the grep that truncates its output the least.
+test -z "$GREP" && {
+ func_check_prog_grep ()
+ {
+ _G_path_prog=$1
+
+ _G_count=0
+ _G_path_prog_max=0
+ printf 0123456789 >conftest.in
+ while :
+ do
+ cat conftest.in conftest.in >conftest.tmp
+ mv conftest.tmp conftest.in
+ cp conftest.in conftest.nl
+ echo 'GREP' >> conftest.nl
+ "$_G_path_prog" -e 'GREP$' -e '-(cannot match)-' <conftest.nl >conftest.out 2>/dev/null || break
+ diff conftest.out conftest.nl >/dev/null 2>&1 || break
+ _G_count=`expr $_G_count + 1`
+ if test "$_G_count" -gt "$_G_path_prog_max"; then
+ # Best one so far, save it but keep looking for a better one
+ func_check_prog_result=$_G_path_prog
+ _G_path_prog_max=$_G_count
+ fi
+ # 10*(2^10) chars as input seems more than enough
+ test 10 -lt "$_G_count" && break
+ done
+ rm -f conftest.in conftest.tmp conftest.nl conftest.out
+ }
+
+ func_path_progs "grep ggrep" func_check_prog_grep $PATH:/usr/xpg4/bin
+ GREP=$func_path_progs_result
+}
+
+
+## ------------------------------- ##
+## User overridable command paths. ##
+## ------------------------------- ##
+
+# All uppercase variable names are used for environment variables. These
+# variables can be overridden by the user before calling a script that
+# uses them if a suitable command of that name is not already available
+# in the command search PATH.
+
+: ${CP="cp -f"}
+: ${ECHO="printf %s\n"}
+: ${EGREP="$GREP -E"}
+: ${FGREP="$GREP -F"}
+: ${LN_S="ln -s"}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+
+
+## -------------------- ##
+## Useful sed snippets. ##
+## -------------------- ##
+
+sed_dirname='s|/[^/]*$||'
+sed_basename='s|^.*/||'
+
+# Sed substitution that helps us do robust quoting. It backslashifies
+# metacharacters that are still active within double-quoted strings.
+sed_quote_subst='s|\([`"$\\]\)|\\\1|g'
+
+# Same as above, but do not quote variable references.
+sed_double_quote_subst='s/\(["`\\]\)/\\\1/g'
+
+# Sed substitution that turns a string into a regex matching for the
+# string literally.
+sed_make_literal_regex='s|[].[^$\\*\/]|\\&|g'
+
+# Sed substitution that converts a w32 file name or path
+# that contains forward slashes, into one that contains
+# (escaped) backslashes. A very naive implementation.
+sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
+
+# Re-'\' parameter expansions in output of sed_double_quote_subst that
+# were '\'-ed in input to the same. If an odd number of '\' preceded a
+# '$' in input to sed_double_quote_subst, that '$' was protected from
+# expansion. Since each input '\' is now two '\'s, look for any number
+# of runs of four '\'s followed by two '\'s and then a '$'. '\' that '$'.
+_G_bs='\\'
+_G_bs2='\\\\'
+_G_bs4='\\\\\\\\'
+_G_dollar='\$'
+sed_double_backslash="\
+ s/$_G_bs4/&\\
+/g
+ s/^$_G_bs2$_G_dollar/$_G_bs&/
+ s/\\([^$_G_bs]\\)$_G_bs2$_G_dollar/\\1$_G_bs2$_G_bs$_G_dollar/g
+ s/\n//g"
+
+
+## ----------------- ##
+## Global variables. ##
+## ----------------- ##
+
+# Except for the global variables explicitly listed below, the following
+# functions in the '^func_' namespace, and the '^require_' namespace
+# variables initialised in the 'Resource management' section, sourcing
+# this file will not pollute your global namespace with anything
+# else. There's no portable way to scope variables in Bourne shell
+# though, so actually running these functions will sometimes place
+# results into a variable named after the function, and often use
+# temporary variables in the '^_G_' namespace. If you are careful to
+# avoid using those namespaces casually in your sourcing script, things
+# should continue to work as you expect. And, of course, you can freely
+# overwrite any of the functions or variables defined here before
+# calling anything to customize them.
+
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
+
+# Allow overriding, eg assuming that you follow the convention of
+# putting '$debug_cmd' at the start of all your functions, you can get
+# bash to show function call trace with:
+#
+# debug_cmd='eval echo "${FUNCNAME[0]} $*" >&2' bash your-script-name
+debug_cmd=${debug_cmd-":"}
+exit_cmd=:
+
+# By convention, finish your script with:
+#
+# exit $exit_status
+#
+# so that you can set exit_status to non-zero if you want to indicate
+# something went wrong during execution without actually bailing out at
+# the point of failure.
+exit_status=$EXIT_SUCCESS
# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
# is ksh but when the shell is invoked as "sh" and the current value of
# the _XPG environment variable is not equal to 1 (one), the special
# positional parameter $0, within a function call, is the name of the
# function.
-progpath="$0"
+progpath=$0
+
+# The name of this program.
+progname=`$ECHO "$progpath" |$SED "$sed_basename"`
+
+# Make sure we have an absolute progpath for reexecution:
+case $progpath in
+ [\\/]*|[A-Za-z]:\\*) ;;
+ *[\\/]*)
+ progdir=`$ECHO "$progpath" |$SED "$sed_dirname"`
+ progdir=`cd "$progdir" && pwd`
+ progpath=$progdir/$progname
+ ;;
+ *)
+ _G_IFS=$IFS
+ IFS=${PATH_SEPARATOR-:}
+ for progdir in $PATH; do
+ IFS=$_G_IFS
+ test -x "$progdir/$progname" && break
+ done
+ IFS=$_G_IFS
+ test -n "$progdir" || progdir=`pwd`
+ progpath=$progdir/$progname
+ ;;
+esac
+## ----------------- ##
+## Standard options. ##
+## ----------------- ##
-: ${CP="cp -f"}
-test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
-: ${MAKE="make"}
-: ${MKDIR="mkdir"}
-: ${MV="mv -f"}
-: ${RM="rm -f"}
-: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
-: ${Xsed="$SED -e 1s/^X//"}
+# The following options affect the operation of the functions defined
+# below, and should be set appropriately depending on run-time para-
+# meters passed on the command line.
-# Global variables:
-EXIT_SUCCESS=0
-EXIT_FAILURE=1
-EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
-EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
+opt_dry_run=false
+opt_quiet=false
+opt_verbose=false
-exit_status=$EXIT_SUCCESS
+# Categories 'all' and 'none' are always available. Append any others
+# you will pass as the first argument to func_warning from your own
+# code.
+warning_categories=
-# Make sure IFS has a sensible default
-lt_nl='
-'
-IFS=" $lt_nl"
+# By default, display warnings according to 'opt_warning_types'. Set
+# 'warning_func' to ':' to elide all warnings, or func_fatal_error to
+# treat the next displayed warning as a fatal error.
+warning_func=func_warn_and_continue
-dirname="s,/[^/]*$,,"
-basename="s,^.*/,,"
+# Set to 'all' to display all warnings, 'none' to suppress all
+# warnings, or a space delimited list of some subset of
+# 'warning_categories' to display only the listed warnings.
+opt_warning_types=all
-# func_dirname file append nondir_replacement
+
+## -------------------- ##
+## Resource management. ##
+## -------------------- ##
+
+# This section contains definitions for functions that each ensure a
+# particular resource (a file, or a non-empty configuration variable for
+# example) is available, and if appropriate to extract default values
+# from pertinent package files. Call them using their associated
+# 'require_*' variable to ensure that they are executed, at most, once.
+#
+# It's entirely deliberate that calling these functions can set
+# variables that don't obey the namespace limitations obeyed by the rest
+# of this file, in order that that they be as useful as possible to
+# callers.
+
+
+# require_term_colors
+# -------------------
+# Allow display of bold text on terminals that support it.
+require_term_colors=func_require_term_colors
+func_require_term_colors ()
+{
+ $debug_cmd
+
+ test -t 1 && {
+ # COLORTERM and USE_ANSI_COLORS environment variables take
+ # precedence, because most terminfo databases neglect to describe
+ # whether color sequences are supported.
+ test -n "${COLORTERM+set}" && : ${USE_ANSI_COLORS="1"}
+
+ if test 1 = "$USE_ANSI_COLORS"; then
+ # Standard ANSI escape sequences
+ tc_reset='[0m'
+ tc_bold='[1m'; tc_standout='[7m'
+ tc_red='[31m'; tc_green='[32m'
+ tc_blue='[34m'; tc_cyan='[36m'
+ else
+ # Otherwise trust the terminfo database after all.
+ test -n "`tput sgr0 2>/dev/null`" && {
+ tc_reset=`tput sgr0`
+ test -n "`tput bold 2>/dev/null`" && tc_bold=`tput bold`
+ tc_standout=$tc_bold
+ test -n "`tput smso 2>/dev/null`" && tc_standout=`tput smso`
+ test -n "`tput setaf 1 2>/dev/null`" && tc_red=`tput setaf 1`
+ test -n "`tput setaf 2 2>/dev/null`" && tc_green=`tput setaf 2`
+ test -n "`tput setaf 4 2>/dev/null`" && tc_blue=`tput setaf 4`
+ test -n "`tput setaf 5 2>/dev/null`" && tc_cyan=`tput setaf 5`
+ }
+ fi
+ }
+
+ require_term_colors=:
+}
+
+
+## ----------------- ##
+## Function library. ##
+## ----------------- ##
+
+# This section contains a variety of useful functions to call in your
+# scripts. Take note of the portable wrappers for features provided by
+# some modern shells, which will fall back to slower equivalents on
+# less featureful shells.
+
+
+# func_append VAR VALUE
+# ---------------------
+# Append VALUE onto the existing contents of VAR.
+
+ # We should try to minimise forks, especially on Windows where they are
+ # unreasonably slow, so skip the feature probes when bash or zsh are
+ # being used:
+ if test set = "${BASH_VERSION+set}${ZSH_VERSION+set}"; then
+ : ${_G_HAVE_ARITH_OP="yes"}
+ : ${_G_HAVE_XSI_OPS="yes"}
+ # The += operator was introduced in bash 3.1
+ case $BASH_VERSION in
+ [12].* | 3.0 | 3.0*) ;;
+ *)
+ : ${_G_HAVE_PLUSEQ_OP="yes"}
+ ;;
+ esac
+ fi
+
+ # _G_HAVE_PLUSEQ_OP
+ # Can be empty, in which case the shell is probed, "yes" if += is
+ # useable or anything else if it does not work.
+ test -z "$_G_HAVE_PLUSEQ_OP" \
+ && (eval 'x=a; x+=" b"; test "a b" = "$x"') 2>/dev/null \
+ && _G_HAVE_PLUSEQ_OP=yes
+
+if test yes = "$_G_HAVE_PLUSEQ_OP"
+then
+ # This is an XSI compatible shell, allowing a faster implementation...
+ eval 'func_append ()
+ {
+ $debug_cmd
+
+ eval "$1+=\$2"
+ }'
+else
+ # ...otherwise fall back to using expr, which is often a shell builtin.
+ func_append ()
+ {
+ $debug_cmd
+
+ eval "$1=\$$1\$2"
+ }
+fi
+
+
+# func_append_quoted VAR VALUE
+# ----------------------------
+# Quote VALUE and append to the end of shell variable VAR, separated
+# by a space.
+if test yes = "$_G_HAVE_PLUSEQ_OP"; then
+ eval 'func_append_quoted ()
+ {
+ $debug_cmd
+
+ func_quote_for_eval "$2"
+ eval "$1+=\\ \$func_quote_for_eval_result"
+ }'
+else
+ func_append_quoted ()
+ {
+ $debug_cmd
+
+ func_quote_for_eval "$2"
+ eval "$1=\$$1\\ \$func_quote_for_eval_result"
+ }
+fi
+
+
+# func_append_uniq VAR VALUE
+# --------------------------
+# Append unique VALUE onto the existing contents of VAR, assuming
+# entries are delimited by the first character of VALUE. For example:
+#
+# func_append_uniq options " --another-option option-argument"
+#
+# will only append to $options if " --another-option option-argument "
+# is not already present somewhere in $options already (note spaces at
+# each end implied by leading space in second argument).
+func_append_uniq ()
+{
+ $debug_cmd
+
+ eval _G_current_value='`$ECHO $'$1'`'
+ _G_delim=`expr "$2" : '\(.\)'`
+
+ case $_G_delim$_G_current_value$_G_delim in
+ *"$2$_G_delim"*) ;;
+ *) func_append "$@" ;;
+ esac
+}
+
+
+# func_arith TERM...
+# ------------------
+# Set func_arith_result to the result of evaluating TERMs.
+ test -z "$_G_HAVE_ARITH_OP" \
+ && (eval 'test 2 = $(( 1 + 1 ))') 2>/dev/null \
+ && _G_HAVE_ARITH_OP=yes
+
+if test yes = "$_G_HAVE_ARITH_OP"; then
+ eval 'func_arith ()
+ {
+ $debug_cmd
+
+ func_arith_result=$(( $* ))
+ }'
+else
+ func_arith ()
+ {
+ $debug_cmd
+
+ func_arith_result=`expr "$@"`
+ }
+fi
+
+
+# func_basename FILE
+# ------------------
+# Set func_basename_result to FILE with everything up to and including
+# the last / stripped.
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ # If this shell supports suffix pattern removal, then use it to avoid
+ # forking. Hide the definitions single quotes in case the shell chokes
+ # on unsupported syntax...
+ _b='func_basename_result=${1##*/}'
+ _d='case $1 in
+ */*) func_dirname_result=${1%/*}$2 ;;
+ * ) func_dirname_result=$3 ;;
+ esac'
+
+else
+ # ...otherwise fall back to using sed.
+ _b='func_basename_result=`$ECHO "$1" |$SED "$sed_basename"`'
+ _d='func_dirname_result=`$ECHO "$1" |$SED "$sed_dirname"`
+ if test "X$func_dirname_result" = "X$1"; then
+ func_dirname_result=$3
+ else
+ func_append func_dirname_result "$2"
+ fi'
+fi
+
+eval 'func_basename ()
+{
+ $debug_cmd
+
+ '"$_b"'
+}'
+
+
+# func_dirname FILE APPEND NONDIR_REPLACEMENT
+# -------------------------------------------
# Compute the dirname of FILE. If nonempty, add APPEND to the result,
# otherwise set result to NONDIR_REPLACEMENT.
-func_dirname ()
+eval 'func_dirname ()
{
- func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
- fi
-} # func_dirname may be replaced by extended shell implementation
+ $debug_cmd
+
+ '"$_d"'
+}'
-# func_basename file
-func_basename ()
-{
- func_basename_result=`$ECHO "${1}" | $SED "$basename"`
-} # func_basename may be replaced by extended shell implementation
-
-
-# func_dirname_and_basename file append nondir_replacement
-# perform func_basename and func_dirname in a single function
+# func_dirname_and_basename FILE APPEND NONDIR_REPLACEMENT
+# --------------------------------------------------------
+# Perform func_basename and func_dirname in a single function
# call:
# dirname: Compute the dirname of FILE. If nonempty,
# add APPEND to the result, otherwise set result
@@ -190,263 +697,327 @@
# value returned in "$func_dirname_result"
# basename: Compute filename of FILE.
# value retuned in "$func_basename_result"
-# Implementation must be kept synchronized with func_dirname
-# and func_basename. For efficiency, we do not delegate to
-# those functions but instead duplicate the functionality here.
-func_dirname_and_basename ()
+# For efficiency, we do not delegate to the functions above but instead
+# duplicate the functionality here.
+eval 'func_dirname_and_basename ()
{
- # Extract subdirectory from the argument.
- func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
- if test "X$func_dirname_result" = "X${1}"; then
- func_dirname_result="${3}"
- else
- func_dirname_result="$func_dirname_result${2}"
+ $debug_cmd
+
+ '"$_b"'
+ '"$_d"'
+}'
+
+
+# func_echo ARG...
+# ----------------
+# Echo program name prefixed message.
+func_echo ()
+{
+ $debug_cmd
+
+ _G_message=$*
+
+ func_echo_IFS=$IFS
+ IFS=$nl
+ for _G_line in $_G_message; do
+ IFS=$func_echo_IFS
+ $ECHO "$progname: $_G_line"
+ done
+ IFS=$func_echo_IFS
+}
+
+
+# func_echo_all ARG...
+# --------------------
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+ $ECHO "$*"
+}
+
+
+# func_echo_infix_1 INFIX ARG...
+# ------------------------------
+# Echo program name, followed by INFIX on the first line, with any
+# additional lines not showing INFIX.
+func_echo_infix_1 ()
+{
+ $debug_cmd
+
+ $require_term_colors
+
+ _G_infix=$1; shift
+ _G_indent=$_G_infix
+ _G_prefix="$progname: $_G_infix: "
+ _G_message=$*
+
+ # Strip color escape sequences before counting printable length
+ for _G_tc in "$tc_reset" "$tc_bold" "$tc_standout" "$tc_red" "$tc_green" "$tc_blue" "$tc_cyan"
+ do
+ test -n "$_G_tc" && {
+ _G_esc_tc=`$ECHO "$_G_tc" | $SED "$sed_make_literal_regex"`
+ _G_indent=`$ECHO "$_G_indent" | $SED "s|$_G_esc_tc||g"`
+ }
+ done
+ _G_indent="$progname: "`echo "$_G_indent" | $SED 's|.| |g'`" " ## exclude from sc_prohibit_nested_quotes
+
+ func_echo_infix_1_IFS=$IFS
+ IFS=$nl
+ for _G_line in $_G_message; do
+ IFS=$func_echo_infix_1_IFS
+ $ECHO "$_G_prefix$tc_bold$_G_line$tc_reset" >&2
+ _G_prefix=$_G_indent
+ done
+ IFS=$func_echo_infix_1_IFS
+}
+
+
+# func_error ARG...
+# -----------------
+# Echo program name prefixed message to standard error.
+func_error ()
+{
+ $debug_cmd
+
+ $require_term_colors
+
+ func_echo_infix_1 " $tc_standout${tc_red}error$tc_reset" "$*" >&2
+}
+
+
+# func_fatal_error ARG...
+# -----------------------
+# Echo program name prefixed message to standard error, and exit.
+func_fatal_error ()
+{
+ $debug_cmd
+
+ func_error "$*"
+ exit $EXIT_FAILURE
+}
+
+
+# func_grep EXPRESSION FILENAME
+# -----------------------------
+# Check whether EXPRESSION matches any line of FILENAME, without output.
+func_grep ()
+{
+ $debug_cmd
+
+ $GREP "$1" "$2" >/dev/null 2>&1
+}
+
+
+# func_len STRING
+# ---------------
+# Set func_len_result to the length of STRING. STRING may not
+# start with a hyphen.
+ test -z "$_G_HAVE_XSI_OPS" \
+ && (eval 'x=a/b/c;
+ test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+ && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ eval 'func_len ()
+ {
+ $debug_cmd
+
+ func_len_result=${#1}
+ }'
+else
+ func_len ()
+ {
+ $debug_cmd
+
+ func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len`
+ }
+fi
+
+
+# func_mkdir_p DIRECTORY-PATH
+# ---------------------------
+# Make sure the entire path to DIRECTORY-PATH is available.
+func_mkdir_p ()
+{
+ $debug_cmd
+
+ _G_directory_path=$1
+ _G_dir_list=
+
+ if test -n "$_G_directory_path" && test : != "$opt_dry_run"; then
+
+ # Protect directory names starting with '-'
+ case $_G_directory_path in
+ -*) _G_directory_path=./$_G_directory_path ;;
+ esac
+
+ # While some portion of DIR does not yet exist...
+ while test ! -d "$_G_directory_path"; do
+ # ...make a list in topmost first order. Use a colon delimited
+ # list incase some portion of path contains whitespace.
+ _G_dir_list=$_G_directory_path:$_G_dir_list
+
+ # If the last portion added has no slash in it, the list is done
+ case $_G_directory_path in */*) ;; *) break ;; esac
+
+ # ...otherwise throw away the child directory and loop
+ _G_directory_path=`$ECHO "$_G_directory_path" | $SED -e "$sed_dirname"`
+ done
+ _G_dir_list=`$ECHO "$_G_dir_list" | $SED 's|:*$||'`
+
+ func_mkdir_p_IFS=$IFS; IFS=:
+ for _G_dir in $_G_dir_list; do
+ IFS=$func_mkdir_p_IFS
+ # mkdir can fail with a 'File exist' error if two processes
+ # try to create one of the directories concurrently. Don't
+ # stop in that case!
+ $MKDIR "$_G_dir" 2>/dev/null || :
+ done
+ IFS=$func_mkdir_p_IFS
+
+ # Bail out if we (or some other process) failed to create a directory.
+ test -d "$_G_directory_path" || \
+ func_fatal_error "Failed to create '$1'"
fi
- func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
-} # func_dirname_and_basename may be replaced by extended shell implementation
+}
-# func_stripname prefix suffix name
-# strip PREFIX and SUFFIX off of NAME.
-# PREFIX and SUFFIX must not contain globbing or regex special
-# characters, hashes, percent signs, but SUFFIX may contain a leading
-# dot (in which case that matches only a dot).
-# func_strip_suffix prefix name
-func_stripname ()
+# func_mktempdir [BASENAME]
+# -------------------------
+# Make a temporary directory that won't clash with other running
+# libtool processes, and avoids race conditions if possible. If
+# given, BASENAME is the basename for that directory.
+func_mktempdir ()
{
- case ${2} in
- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
- esac
-} # func_stripname may be replaced by extended shell implementation
+ $debug_cmd
+ _G_template=${TMPDIR-/tmp}/${1-$progname}
-# These SED scripts presuppose an absolute path with a trailing slash.
-pathcar='s,^/\([^/]*\).*$,\1,'
-pathcdr='s,^/[^/]*,,'
-removedotparts=':dotsl
- s@/\./@/@g
- t dotsl
- s,/\.$,/,'
-collapseslashes='s@/\{1,\}@/@g'
-finalslash='s,/*$,/,'
+ if test : = "$opt_dry_run"; then
+ # Return a directory name, but don't create it in dry-run mode
+ _G_tmpdir=$_G_template-$$
+ else
+
+ # If mktemp works, use that first and foremost
+ _G_tmpdir=`mktemp -d "$_G_template-XXXXXXXX" 2>/dev/null`
+
+ if test ! -d "$_G_tmpdir"; then
+ # Failing that, at least try and use $RANDOM to avoid a race
+ _G_tmpdir=$_G_template-${RANDOM-0}$$
+
+ func_mktempdir_umask=`umask`
+ umask 0077
+ $MKDIR "$_G_tmpdir"
+ umask $func_mktempdir_umask
+ fi
+
+ # If we're not in dry-run mode, bomb out on failure
+ test -d "$_G_tmpdir" || \
+ func_fatal_error "cannot create temporary directory '$_G_tmpdir'"
+ fi
+
+ $ECHO "$_G_tmpdir"
+}
+
# func_normal_abspath PATH
+# ------------------------
# Remove doubled-up and trailing slashes, "." path components,
# and cancel out any ".." path components in PATH after making
# it an absolute path.
-# value returned in "$func_normal_abspath_result"
func_normal_abspath ()
{
- # Start from root dir and reassemble the path.
- func_normal_abspath_result=
- func_normal_abspath_tpath=$1
- func_normal_abspath_altnamespace=
- case $func_normal_abspath_tpath in
- "")
- # Empty path, that just means $cwd.
- func_stripname '' '/' "`pwd`"
- func_normal_abspath_result=$func_stripname_result
- return
- ;;
- # The next three entries are used to spot a run of precisely
- # two leading slashes without using negated character classes;
- # we take advantage of case's first-match behaviour.
- ///*)
- # Unusual form of absolute path, do nothing.
- ;;
- //*)
- # Not necessarily an ordinary path; POSIX reserves leading '//'
- # and for example Cygwin uses it to access remote file shares
- # over CIFS/SMB, so we conserve a leading double slash if found.
- func_normal_abspath_altnamespace=/
- ;;
- /*)
- # Absolute path, do nothing.
- ;;
- *)
- # Relative path, prepend $cwd.
- func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
- ;;
- esac
- # Cancel out all the simple stuff to save iterations. We also want
- # the path to end with a slash for ease of parsing, so make sure
- # there is one (and only one) here.
- func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
- -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
- while :; do
- # Processed it all yet?
- if test "$func_normal_abspath_tpath" = / ; then
- # If we ascended to the root using ".." the result may be empty now.
- if test -z "$func_normal_abspath_result" ; then
- func_normal_abspath_result=/
- fi
- break
- fi
- func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
- -e "$pathcar"`
- func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
- -e "$pathcdr"`
- # Figure out what to do with it
- case $func_normal_abspath_tcomponent in
+ $debug_cmd
+
+ # These SED scripts presuppose an absolute path with a trailing slash.
+ _G_pathcar='s|^/\([^/]*\).*$|\1|'
+ _G_pathcdr='s|^/[^/]*||'
+ _G_removedotparts=':dotsl
+ s|/\./|/|g
+ t dotsl
+ s|/\.$|/|'
+ _G_collapseslashes='s|/\{1,\}|/|g'
+ _G_finalslash='s|/*$|/|'
+
+ # Start from root dir and reassemble the path.
+ func_normal_abspath_result=
+ func_normal_abspath_tpath=$1
+ func_normal_abspath_altnamespace=
+ case $func_normal_abspath_tpath in
"")
- # Trailing empty path component, ignore it.
- ;;
- ..)
- # Parent dir; strip last assembled component from result.
- func_dirname "$func_normal_abspath_result"
- func_normal_abspath_result=$func_dirname_result
- ;;
- *)
- # Actual path component, append it.
- func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
- ;;
- esac
- done
- # Restore leading double-slash if one was found on entry.
- func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
-}
-
-# func_relative_path SRCDIR DSTDIR
-# generates a relative path from SRCDIR to DSTDIR, with a trailing
-# slash if non-empty, suitable for immediately appending a filename
-# without needing to append a separator.
-# value returned in "$func_relative_path_result"
-func_relative_path ()
-{
- func_relative_path_result=
- func_normal_abspath "$1"
- func_relative_path_tlibdir=$func_normal_abspath_result
- func_normal_abspath "$2"
- func_relative_path_tbindir=$func_normal_abspath_result
-
- # Ascend the tree starting from libdir
- while :; do
- # check if we have found a prefix of bindir
- case $func_relative_path_tbindir in
- $func_relative_path_tlibdir)
- # found an exact match
- func_relative_path_tcancelled=
- break
+ # Empty path, that just means $cwd.
+ func_stripname '' '/' "`pwd`"
+ func_normal_abspath_result=$func_stripname_result
+ return
;;
- $func_relative_path_tlibdir*)
- # found a matching prefix
- func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
- func_relative_path_tcancelled=$func_stripname_result
- if test -z "$func_relative_path_result"; then
- func_relative_path_result=.
- fi
- break
+ # The next three entries are used to spot a run of precisely
+ # two leading slashes without using negated character classes;
+ # we take advantage of case's first-match behaviour.
+ ///*)
+ # Unusual form of absolute path, do nothing.
+ ;;
+ //*)
+ # Not necessarily an ordinary path; POSIX reserves leading '//'
+ # and for example Cygwin uses it to access remote file shares
+ # over CIFS/SMB, so we conserve a leading double slash if found.
+ func_normal_abspath_altnamespace=/
+ ;;
+ /*)
+ # Absolute path, do nothing.
;;
*)
- func_dirname $func_relative_path_tlibdir
- func_relative_path_tlibdir=${func_dirname_result}
- if test "x$func_relative_path_tlibdir" = x ; then
- # Have to descend all the way to the root!
- func_relative_path_result=../$func_relative_path_result
- func_relative_path_tcancelled=$func_relative_path_tbindir
- break
- fi
- func_relative_path_result=../$func_relative_path_result
+ # Relative path, prepend $cwd.
+ func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
;;
esac
- done
- # Now calculate path; take care to avoid doubling-up slashes.
- func_stripname '' '/' "$func_relative_path_result"
- func_relative_path_result=$func_stripname_result
- func_stripname '/' '/' "$func_relative_path_tcancelled"
- if test "x$func_stripname_result" != x ; then
- func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
- fi
-
- # Normalisation. If bindir is libdir, return empty string,
- # else relative path ending with a slash; either way, target
- # file name can be directly appended.
- if test ! -z "$func_relative_path_result"; then
- func_stripname './' '' "$func_relative_path_result/"
- func_relative_path_result=$func_stripname_result
- fi
+ # Cancel out all the simple stuff to save iterations. We also want
+ # the path to end with a slash for ease of parsing, so make sure
+ # there is one (and only one) here.
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$_G_removedotparts" -e "$_G_collapseslashes" -e "$_G_finalslash"`
+ while :; do
+ # Processed it all yet?
+ if test / = "$func_normal_abspath_tpath"; then
+ # If we ascended to the root using ".." the result may be empty now.
+ if test -z "$func_normal_abspath_result"; then
+ func_normal_abspath_result=/
+ fi
+ break
+ fi
+ func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$_G_pathcar"`
+ func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+ -e "$_G_pathcdr"`
+ # Figure out what to do with it
+ case $func_normal_abspath_tcomponent in
+ "")
+ # Trailing empty path component, ignore it.
+ ;;
+ ..)
+ # Parent dir; strip last assembled component from result.
+ func_dirname "$func_normal_abspath_result"
+ func_normal_abspath_result=$func_dirname_result
+ ;;
+ *)
+ # Actual path component, append it.
+ func_append func_normal_abspath_result "/$func_normal_abspath_tcomponent"
+ ;;
+ esac
+ done
+ # Restore leading double-slash if one was found on entry.
+ func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
}
-# The name of this program:
-func_dirname_and_basename "$progpath"
-progname=$func_basename_result
-# Make sure we have an absolute path for reexecution:
-case $progpath in
- [\\/]*|[A-Za-z]:\\*) ;;
- *[\\/]*)
- progdir=$func_dirname_result
- progdir=`cd "$progdir" && pwd`
- progpath="$progdir/$progname"
- ;;
- *)
- save_IFS="$IFS"
- IFS=${PATH_SEPARATOR-:}
- for progdir in $PATH; do
- IFS="$save_IFS"
- test -x "$progdir/$progname" && break
- done
- IFS="$save_IFS"
- test -n "$progdir" || progdir=`pwd`
- progpath="$progdir/$progname"
- ;;
-esac
-
-# Sed substitution that helps us do robust quoting. It backslashifies
-# metacharacters that are still active within double-quoted strings.
-Xsed="${SED}"' -e 1s/^X//'
-sed_quote_subst='s/\([`"$\\]\)/\\\1/g'
-
-# Same as above, but do not quote variable references.
-double_quote_subst='s/\(["`\\]\)/\\\1/g'
-
-# Sed substitution that turns a string into a regex matching for the
-# string literally.
-sed_make_literal_regex='s,[].[^$\\*\/],\\&,g'
-
-# Sed substitution that converts a w32 file name or path
-# which contains forward slashes, into one that contains
-# (escaped) backslashes. A very naive implementation.
-lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
-
-# Re-`\' parameter expansions in output of double_quote_subst that were
-# `\'-ed in input to the same. If an odd number of `\' preceded a '$'
-# in input to double_quote_subst, that '$' was protected from expansion.
-# Since each input `\' is now two `\'s, look for any number of runs of
-# four `\'s followed by two `\'s and then a '$'. `\' that '$'.
-bs='\\'
-bs2='\\\\'
-bs4='\\\\\\\\'
-dollar='\$'
-sed_double_backslash="\
- s/$bs4/&\\
-/g
- s/^$bs2$dollar/$bs&/
- s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g
- s/\n//g"
-
-# Standard options:
-opt_dry_run=false
-opt_help=false
-opt_quiet=false
-opt_verbose=false
-opt_warning=:
-
-# func_echo arg...
-# Echo program name prefixed message, along with the current mode
-# name if it has been set yet.
-func_echo ()
+# func_notquiet ARG...
+# --------------------
+# Echo program name prefixed message only when not in quiet mode.
+func_notquiet ()
{
- $ECHO "$progname: ${opt_mode+$opt_mode: }$*"
-}
+ $debug_cmd
-# func_verbose arg...
-# Echo program name prefixed message in verbose mode only.
-func_verbose ()
-{
- $opt_verbose && func_echo ${1+"$@"}
+ $opt_quiet || func_echo ${1+"$@"}
# A bug in bash halts the script if the last line of a function
# fails when set -e is in force, so we need another command to
@@ -454,450 +1025,1113 @@
:
}
-# func_echo_all arg...
-# Invoke $ECHO with all args, space-separated.
-func_echo_all ()
-{
- $ECHO "$*"
-}
-# func_error arg...
-# Echo program name prefixed message to standard error.
-func_error ()
+# func_relative_path SRCDIR DSTDIR
+# --------------------------------
+# Set func_relative_path_result to the relative path from SRCDIR to DSTDIR.
+func_relative_path ()
{
- $ECHO "$progname: ${opt_mode+$opt_mode: }"${1+"$@"} 1>&2
-}
+ $debug_cmd
-# func_warning arg...
-# Echo program name prefixed warning message to standard error.
-func_warning ()
-{
- $opt_warning && $ECHO "$progname: ${opt_mode+$opt_mode: }warning: "${1+"$@"} 1>&2
+ func_relative_path_result=
+ func_normal_abspath "$1"
+ func_relative_path_tlibdir=$func_normal_abspath_result
+ func_normal_abspath "$2"
+ func_relative_path_tbindir=$func_normal_abspath_result
- # bash bug again:
+ # Ascend the tree starting from libdir
+ while :; do
+ # check if we have found a prefix of bindir
+ case $func_relative_path_tbindir in
+ $func_relative_path_tlibdir)
+ # found an exact match
+ func_relative_path_tcancelled=
+ break
+ ;;
+ $func_relative_path_tlibdir*)
+ # found a matching prefix
+ func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+ func_relative_path_tcancelled=$func_stripname_result
+ if test -z "$func_relative_path_result"; then
+ func_relative_path_result=.
+ fi
+ break
+ ;;
+ *)
+ func_dirname $func_relative_path_tlibdir
+ func_relative_path_tlibdir=$func_dirname_result
+ if test -z "$func_relative_path_tlibdir"; then
+ # Have to descend all the way to the root!
+ func_relative_path_result=../$func_relative_path_result
+ func_relative_path_tcancelled=$func_relative_path_tbindir
+ break
+ fi
+ func_relative_path_result=../$func_relative_path_result
+ ;;
+ esac
+ done
+
+ # Now calculate path; take care to avoid doubling-up slashes.
+ func_stripname '' '/' "$func_relative_path_result"
+ func_relative_path_result=$func_stripname_result
+ func_stripname '/' '/' "$func_relative_path_tcancelled"
+ if test -n "$func_stripname_result"; then
+ func_append func_relative_path_result "/$func_stripname_result"
+ fi
+
+ # Normalisation. If bindir is libdir, return '.' else relative path.
+ if test -n "$func_relative_path_result"; then
+ func_stripname './' '' "$func_relative_path_result"
+ func_relative_path_result=$func_stripname_result
+ fi
+
+ test -n "$func_relative_path_result" || func_relative_path_result=.
+
:
}
-# func_fatal_error arg...
-# Echo program name prefixed message to standard error, and exit.
-func_fatal_error ()
-{
- func_error ${1+"$@"}
- exit $EXIT_FAILURE
-}
-# func_fatal_help arg...
-# Echo program name prefixed message to standard error, followed by
-# a help hint, and exit.
-func_fatal_help ()
-{
- func_error ${1+"$@"}
- func_fatal_error "$help"
-}
-help="Try \`$progname --help' for more information." ## default
-
-
-# func_grep expression filename
-# Check whether EXPRESSION matches any line of FILENAME, without output.
-func_grep ()
-{
- $GREP "$1" "$2" >/dev/null 2>&1
-}
-
-
-# func_mkdir_p directory-path
-# Make sure the entire path to DIRECTORY-PATH is available.
-func_mkdir_p ()
-{
- my_directory_path="$1"
- my_dir_list=
-
- if test -n "$my_directory_path" && test "$opt_dry_run" != ":"; then
-
- # Protect directory names starting with `-'
- case $my_directory_path in
- -*) my_directory_path="./$my_directory_path" ;;
- esac
-
- # While some portion of DIR does not yet exist...
- while test ! -d "$my_directory_path"; do
- # ...make a list in topmost first order. Use a colon delimited
- # list incase some portion of path contains whitespace.
- my_dir_list="$my_directory_path:$my_dir_list"
-
- # If the last portion added has no slash in it, the list is done
- case $my_directory_path in */*) ;; *) break ;; esac
-
- # ...otherwise throw away the child directory and loop
- my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
- done
- my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
-
- save_mkdir_p_IFS="$IFS"; IFS=':'
- for my_dir in $my_dir_list; do
- IFS="$save_mkdir_p_IFS"
- # mkdir can fail with a `File exist' error if two processes
- # try to create one of the directories concurrently. Don't
- # stop in that case!
- $MKDIR "$my_dir" 2>/dev/null || :
- done
- IFS="$save_mkdir_p_IFS"
-
- # Bail out if we (or some other process) failed to create a directory.
- test -d "$my_directory_path" || \
- func_fatal_error "Failed to create \`$1'"
- fi
-}
-
-
-# func_mktempdir [string]
-# Make a temporary directory that won't clash with other running
-# libtool processes, and avoids race conditions if possible. If
-# given, STRING is the basename for that directory.
-func_mktempdir ()
-{
- my_template="${TMPDIR-/tmp}/${1-$progname}"
-
- if test "$opt_dry_run" = ":"; then
- # Return a directory name, but don't create it in dry-run mode
- my_tmpdir="${my_template}-$$"
- else
-
- # If mktemp works, use that first and foremost
- my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null`
-
- if test ! -d "$my_tmpdir"; then
- # Failing that, at least try and use $RANDOM to avoid a race
- my_tmpdir="${my_template}-${RANDOM-0}$$"
-
- save_mktempdir_umask=`umask`
- umask 0077
- $MKDIR "$my_tmpdir"
- umask $save_mktempdir_umask
- fi
-
- # If we're not in dry-run mode, bomb out on failure
- test -d "$my_tmpdir" || \
- func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
- fi
-
- $ECHO "$my_tmpdir"
-}
-
-
-# func_quote_for_eval arg
-# Aesthetically quote ARG to be evaled later.
-# This function returns two values: FUNC_QUOTE_FOR_EVAL_RESULT
-# is double-quoted, suitable for a subsequent eval, whereas
-# FUNC_QUOTE_FOR_EVAL_UNQUOTED_RESULT has merely all characters
-# which are still active within double quotes backslashified.
+# func_quote_for_eval ARG...
+# --------------------------
+# Aesthetically quote ARGs to be evaled later.
+# This function returns two values:
+# i) func_quote_for_eval_result
+# double-quoted, suitable for a subsequent eval
+# ii) func_quote_for_eval_unquoted_result
+# has all characters that are still active within double
+# quotes backslashified.
func_quote_for_eval ()
{
- case $1 in
- *[\\\`\"\$]*)
- func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
- *)
- func_quote_for_eval_unquoted_result="$1" ;;
- esac
+ $debug_cmd
- case $func_quote_for_eval_unquoted_result in
- # Double-quote args containing shell metacharacters to delay
- # word splitting, command substitution and and variable
- # expansion for a subsequent eval.
- # Many Bourne shells cannot handle close brackets correctly
- # in scan sets, so we specify it separately.
- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- func_quote_for_eval_result="\"$func_quote_for_eval_unquoted_result\""
- ;;
- *)
- func_quote_for_eval_result="$func_quote_for_eval_unquoted_result"
- esac
+ func_quote_for_eval_unquoted_result=
+ func_quote_for_eval_result=
+ while test 0 -lt $#; do
+ case $1 in
+ *[\\\`\"\$]*)
+ _G_unquoted_arg=`printf '%s\n' "$1" |$SED "$sed_quote_subst"` ;;
+ *)
+ _G_unquoted_arg=$1 ;;
+ esac
+ if test -n "$func_quote_for_eval_unquoted_result"; then
+ func_append func_quote_for_eval_unquoted_result " $_G_unquoted_arg"
+ else
+ func_append func_quote_for_eval_unquoted_result "$_G_unquoted_arg"
+ fi
+
+ case $_G_unquoted_arg in
+ # Double-quote args containing shell metacharacters to delay
+ # word splitting, command substitution and variable expansion
+ # for a subsequent eval.
+ # Many Bourne shells cannot handle close brackets correctly
+ # in scan sets, so we specify it separately.
+ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
+ _G_quoted_arg=\"$_G_unquoted_arg\"
+ ;;
+ *)
+ _G_quoted_arg=$_G_unquoted_arg
+ ;;
+ esac
+
+ if test -n "$func_quote_for_eval_result"; then
+ func_append func_quote_for_eval_result " $_G_quoted_arg"
+ else
+ func_append func_quote_for_eval_result "$_G_quoted_arg"
+ fi
+ shift
+ done
}
-# func_quote_for_expand arg
+# func_quote_for_expand ARG
+# -------------------------
# Aesthetically quote ARG to be evaled later; same as above,
# but do not quote variable references.
func_quote_for_expand ()
{
+ $debug_cmd
+
case $1 in
*[\\\`\"]*)
- my_arg=`$ECHO "$1" | $SED \
- -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
+ _G_arg=`$ECHO "$1" | $SED \
+ -e "$sed_double_quote_subst" -e "$sed_double_backslash"` ;;
*)
- my_arg="$1" ;;
+ _G_arg=$1 ;;
esac
- case $my_arg in
+ case $_G_arg in
# Double-quote args containing shell metacharacters to delay
# word splitting and command substitution for a subsequent eval.
# Many Bourne shells cannot handle close brackets correctly
# in scan sets, so we specify it separately.
*[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"")
- my_arg="\"$my_arg\""
+ _G_arg=\"$_G_arg\"
;;
esac
- func_quote_for_expand_result="$my_arg"
+ func_quote_for_expand_result=$_G_arg
}
-# func_show_eval cmd [fail_exp]
-# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# func_stripname PREFIX SUFFIX NAME
+# ---------------------------------
+# strip PREFIX and SUFFIX from NAME, and store in func_stripname_result.
+# PREFIX and SUFFIX must not contain globbing or regex special
+# characters, hashes, percent signs, but SUFFIX may contain a leading
+# dot (in which case that matches only a dot).
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ eval 'func_stripname ()
+ {
+ $debug_cmd
+
+ # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
+ # positional parameters, so assign one to ordinary variable first.
+ func_stripname_result=$3
+ func_stripname_result=${func_stripname_result#"$1"}
+ func_stripname_result=${func_stripname_result%"$2"}
+ }'
+else
+ func_stripname ()
+ {
+ $debug_cmd
+
+ case $2 in
+ .*) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%\\\\$2\$%%"`;;
+ *) func_stripname_result=`$ECHO "$3" | $SED -e "s%^$1%%" -e "s%$2\$%%"`;;
+ esac
+ }
+fi
+
+
+# func_show_eval CMD [FAIL_EXP]
+# -----------------------------
+# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is
# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
# is given, then evaluate it.
func_show_eval ()
{
- my_cmd="$1"
- my_fail_exp="${2-:}"
+ $debug_cmd
- ${opt_silent-false} || {
- func_quote_for_expand "$my_cmd"
- eval "func_echo $func_quote_for_expand_result"
- }
+ _G_cmd=$1
+ _G_fail_exp=${2-':'}
- if ${opt_dry_run-false}; then :; else
- eval "$my_cmd"
- my_status=$?
- if test "$my_status" -eq 0; then :; else
- eval "(exit $my_status); $my_fail_exp"
+ func_quote_for_expand "$_G_cmd"
+ eval "func_notquiet $func_quote_for_expand_result"
+
+ $opt_dry_run || {
+ eval "$_G_cmd"
+ _G_status=$?
+ if test 0 -ne "$_G_status"; then
+ eval "(exit $_G_status); $_G_fail_exp"
fi
- fi
+ }
}
-# func_show_eval_locale cmd [fail_exp]
-# Unless opt_silent is true, then output CMD. Then, if opt_dryrun is
+# func_show_eval_locale CMD [FAIL_EXP]
+# ------------------------------------
+# Unless opt_quiet is true, then output CMD. Then, if opt_dryrun is
# not true, evaluate CMD. If the evaluation of CMD fails, and FAIL_EXP
# is given, then evaluate it. Use the saved locale for evaluation.
func_show_eval_locale ()
{
- my_cmd="$1"
- my_fail_exp="${2-:}"
+ $debug_cmd
- ${opt_silent-false} || {
- func_quote_for_expand "$my_cmd"
+ _G_cmd=$1
+ _G_fail_exp=${2-':'}
+
+ $opt_quiet || {
+ func_quote_for_expand "$_G_cmd"
eval "func_echo $func_quote_for_expand_result"
}
- if ${opt_dry_run-false}; then :; else
- eval "$lt_user_locale
- $my_cmd"
- my_status=$?
- eval "$lt_safe_locale"
- if test "$my_status" -eq 0; then :; else
- eval "(exit $my_status); $my_fail_exp"
+ $opt_dry_run || {
+ eval "$_G_user_locale
+ $_G_cmd"
+ _G_status=$?
+ eval "$_G_safe_locale"
+ if test 0 -ne "$_G_status"; then
+ eval "(exit $_G_status); $_G_fail_exp"
fi
- fi
+ }
}
+
# func_tr_sh
+# ----------
# Turn $1 into a string suitable for a shell variable name.
# Result is stored in $func_tr_sh_result. All characters
# not in the set a-zA-Z0-9_ are replaced with '_'. Further,
# if $1 begins with a digit, a '_' is prepended as well.
func_tr_sh ()
{
- case $1 in
- [0-9]* | *[!a-zA-Z0-9_]*)
- func_tr_sh_result=`$ECHO "$1" | $SED 's/^\([0-9]\)/_\1/; s/[^a-zA-Z0-9_]/_/g'`
- ;;
- * )
- func_tr_sh_result=$1
- ;;
- esac
+ $debug_cmd
+
+ case $1 in
+ [0-9]* | *[!a-zA-Z0-9_]*)
+ func_tr_sh_result=`$ECHO "$1" | $SED -e 's/^\([0-9]\)/_\1/' -e 's/[^a-zA-Z0-9_]/_/g'`
+ ;;
+ * )
+ func_tr_sh_result=$1
+ ;;
+ esac
}
-# func_version
-# Echo version message to standard output and exit.
-func_version ()
+# func_verbose ARG...
+# -------------------
+# Echo program name prefixed message in verbose mode only.
+func_verbose ()
{
- $opt_debug
+ $debug_cmd
- $SED -n '/(C)/!b go
- :more
- /\./!{
- N
- s/\n# / /
- b more
- }
- :go
- /^# '$PROGRAM' (GNU /,/# warranty; / {
- s/^# //
- s/^# *$//
- s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
- p
- }' < "$progpath"
- exit $?
+ $opt_verbose && func_echo "$*"
+
+ :
}
-# func_usage
-# Echo short help message to standard output and exit.
-func_usage ()
+
+# func_warn_and_continue ARG...
+# -----------------------------
+# Echo program name prefixed warning message to standard error.
+func_warn_and_continue ()
{
- $opt_debug
+ $debug_cmd
- $SED -n '/^# Usage:/,/^# *.*--help/ {
- s/^# //
- s/^# *$//
- s/\$progname/'$progname'/
- p
- }' < "$progpath"
- echo
- $ECHO "run \`$progname --help | more' for full usage"
- exit $?
+ $require_term_colors
+
+ func_echo_infix_1 "${tc_red}warning$tc_reset" "$*" >&2
}
-# func_help [NOEXIT]
-# Echo long help message to standard output and exit,
-# unless 'noexit' is passed as argument.
+
+# func_warning CATEGORY ARG...
+# ----------------------------
+# Echo program name prefixed warning message to standard error. Warning
+# messages can be filtered according to CATEGORY, where this function
+# elides messages where CATEGORY is not listed in the global variable
+# 'opt_warning_types'.
+func_warning ()
+{
+ $debug_cmd
+
+ # CATEGORY must be in the warning_categories list!
+ case " $warning_categories " in
+ *" $1 "*) ;;
+ *) func_internal_error "invalid warning category '$1'" ;;
+ esac
+
+ _G_category=$1
+ shift
+
+ case " $opt_warning_types " in
+ *" $_G_category "*) $warning_func ${1+"$@"} ;;
+ esac
+}
+
+
+# func_sort_ver VER1 VER2
+# -----------------------
+# 'sort -V' is not generally available.
+# Note this deviates from the version comparison in automake
+# in that it treats 1.5 < 1.5.0, and treats 1.4.4a < 1.4-p3a
+# but this should suffice as we won't be specifying old
+# version formats or redundant trailing .0 in bootstrap.conf.
+# If we did want full compatibility then we should probably
+# use m4_version_compare from autoconf.
+func_sort_ver ()
+{
+ $debug_cmd
+
+ printf '%s\n%s\n' "$1" "$2" \
+ | sort -t. -k 1,1n -k 2,2n -k 3,3n -k 4,4n -k 5,5n -k 6,6n -k 7,7n -k 8,8n -k 9,9n
+}
+
+# func_lt_ver PREV CURR
+# ---------------------
+# Return true if PREV and CURR are in the correct order according to
+# func_sort_ver, otherwise false. Use it like this:
+#
+# func_lt_ver "$prev_ver" "$proposed_ver" || func_fatal_error "..."
+func_lt_ver ()
+{
+ $debug_cmd
+
+ test "x$1" = x`func_sort_ver "$1" "$2" | $SED 1q`
+}
+
+
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
+#! /bin/sh
+
+# Set a version string for this script.
+scriptversion=2014-01-07.03; # UTC
+
+# A portable, pluggable option parser for Bourne shell.
+# Written by Gary V. Vaughan, 2010
+
+# Copyright (C) 2010-2015 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# Please report bugs or propose patches to gary@gnu.org.
+
+
+## ------ ##
+## Usage. ##
+## ------ ##
+
+# This file is a library for parsing options in your shell scripts along
+# with assorted other useful supporting features that you can make use
+# of too.
+#
+# For the simplest scripts you might need only:
+#
+# #!/bin/sh
+# . relative/path/to/funclib.sh
+# . relative/path/to/options-parser
+# scriptversion=1.0
+# func_options ${1+"$@"}
+# eval set dummy "$func_options_result"; shift
+# ...rest of your script...
+#
+# In order for the '--version' option to work, you will need to have a
+# suitably formatted comment like the one at the top of this file
+# starting with '# Written by ' and ending with '# warranty; '.
+#
+# For '-h' and '--help' to work, you will also need a one line
+# description of your script's purpose in a comment directly above the
+# '# Written by ' line, like the one at the top of this file.
+#
+# The default options also support '--debug', which will turn on shell
+# execution tracing (see the comment above debug_cmd below for another
+# use), and '--verbose' and the func_verbose function to allow your script
+# to display verbose messages only when your user has specified
+# '--verbose'.
+#
+# After sourcing this file, you can plug processing for additional
+# options by amending the variables from the 'Configuration' section
+# below, and following the instructions in the 'Option parsing'
+# section further down.
+
+## -------------- ##
+## Configuration. ##
+## -------------- ##
+
+# You should override these variables in your script after sourcing this
+# file so that they reflect the customisations you have added to the
+# option parser.
+
+# The usage line for option parsing errors and the start of '-h' and
+# '--help' output messages. You can embed shell variables for delayed
+# expansion at the time the message is displayed, but you will need to
+# quote other shell meta-characters carefully to prevent them being
+# expanded when the contents are evaled.
+usage='$progpath [OPTION]...'
+
+# Short help message in response to '-h' and '--help'. Add to this or
+# override it after sourcing this library to reflect the full set of
+# options your script accepts.
+usage_message="\
+ --debug enable verbose shell tracing
+ -W, --warnings=CATEGORY
+ report the warnings falling in CATEGORY [all]
+ -v, --verbose verbosely report processing
+ --version print version information and exit
+ -h, --help print short or long help message and exit
+"
+
+# Additional text appended to 'usage_message' in response to '--help'.
+long_help_message="
+Warning categories include:
+ 'all' show all warnings
+ 'none' turn off all the warnings
+ 'error' warnings are treated as fatal errors"
+
+# Help message printed before fatal option parsing errors.
+fatal_help="Try '\$progname --help' for more information."
+
+
+
+## ------------------------- ##
+## Hook function management. ##
+## ------------------------- ##
+
+# This section contains functions for adding, removing, and running hooks
+# to the main code. A hook is just a named list of of function, that can
+# be run in order later on.
+
+# func_hookable FUNC_NAME
+# -----------------------
+# Declare that FUNC_NAME will run hooks added with
+# 'func_add_hook FUNC_NAME ...'.
+func_hookable ()
+{
+ $debug_cmd
+
+ func_append hookable_fns " $1"
+}
+
+
+# func_add_hook FUNC_NAME HOOK_FUNC
+# ---------------------------------
+# Request that FUNC_NAME call HOOK_FUNC before it returns. FUNC_NAME must
+# first have been declared "hookable" by a call to 'func_hookable'.
+func_add_hook ()
+{
+ $debug_cmd
+
+ case " $hookable_fns " in
+ *" $1 "*) ;;
+ *) func_fatal_error "'$1' does not accept hook functions." ;;
+ esac
+
+ eval func_append ${1}_hooks '" $2"'
+}
+
+
+# func_remove_hook FUNC_NAME HOOK_FUNC
+# ------------------------------------
+# Remove HOOK_FUNC from the list of functions called by FUNC_NAME.
+func_remove_hook ()
+{
+ $debug_cmd
+
+ eval ${1}_hooks='`$ECHO "\$'$1'_hooks" |$SED "s| '$2'||"`'
+}
+
+
+# func_run_hooks FUNC_NAME [ARG]...
+# ---------------------------------
+# Run all hook functions registered to FUNC_NAME.
+# It is assumed that the list of hook functions contains nothing more
+# than a whitespace-delimited list of legal shell function names, and
+# no effort is wasted trying to catch shell meta-characters or preserve
+# whitespace.
+func_run_hooks ()
+{
+ $debug_cmd
+
+ case " $hookable_fns " in
+ *" $1 "*) ;;
+ *) func_fatal_error "'$1' does not support hook funcions.n" ;;
+ esac
+
+ eval _G_hook_fns=\$$1_hooks; shift
+
+ for _G_hook in $_G_hook_fns; do
+ eval $_G_hook '"$@"'
+
+ # store returned options list back into positional
+ # parameters for next 'cmd' execution.
+ eval _G_hook_result=\$${_G_hook}_result
+ eval set dummy "$_G_hook_result"; shift
+ done
+
+ func_quote_for_eval ${1+"$@"}
+ func_run_hooks_result=$func_quote_for_eval_result
+}
+
+
+
+## --------------- ##
+## Option parsing. ##
+## --------------- ##
+
+# In order to add your own option parsing hooks, you must accept the
+# full positional parameter list in your hook function, remove any
+# options that you action, and then pass back the remaining unprocessed
+# options in '<hooked_function_name>_result', escaped suitably for
+# 'eval'. Like this:
+#
+# my_options_prep ()
+# {
+# $debug_cmd
+#
+# # Extend the existing usage message.
+# usage_message=$usage_message'
+# -s, --silent don'\''t print informational messages
+# '
+#
+# func_quote_for_eval ${1+"$@"}
+# my_options_prep_result=$func_quote_for_eval_result
+# }
+# func_add_hook func_options_prep my_options_prep
+#
+#
+# my_silent_option ()
+# {
+# $debug_cmd
+#
+# # Note that for efficiency, we parse as many options as we can
+# # recognise in a loop before passing the remainder back to the
+# # caller on the first unrecognised argument we encounter.
+# while test $# -gt 0; do
+# opt=$1; shift
+# case $opt in
+# --silent|-s) opt_silent=: ;;
+# # Separate non-argument short options:
+# -s*) func_split_short_opt "$_G_opt"
+# set dummy "$func_split_short_opt_name" \
+# "-$func_split_short_opt_arg" ${1+"$@"}
+# shift
+# ;;
+# *) set dummy "$_G_opt" "$*"; shift; break ;;
+# esac
+# done
+#
+# func_quote_for_eval ${1+"$@"}
+# my_silent_option_result=$func_quote_for_eval_result
+# }
+# func_add_hook func_parse_options my_silent_option
+#
+#
+# my_option_validation ()
+# {
+# $debug_cmd
+#
+# $opt_silent && $opt_verbose && func_fatal_help "\
+# '--silent' and '--verbose' options are mutually exclusive."
+#
+# func_quote_for_eval ${1+"$@"}
+# my_option_validation_result=$func_quote_for_eval_result
+# }
+# func_add_hook func_validate_options my_option_validation
+#
+# You'll alse need to manually amend $usage_message to reflect the extra
+# options you parse. It's preferable to append if you can, so that
+# multiple option parsing hooks can be added safely.
+
+
+# func_options [ARG]...
+# ---------------------
+# All the functions called inside func_options are hookable. See the
+# individual implementations for details.
+func_hookable func_options
+func_options ()
+{
+ $debug_cmd
+
+ func_options_prep ${1+"$@"}
+ eval func_parse_options \
+ ${func_options_prep_result+"$func_options_prep_result"}
+ eval func_validate_options \
+ ${func_parse_options_result+"$func_parse_options_result"}
+
+ eval func_run_hooks func_options \
+ ${func_validate_options_result+"$func_validate_options_result"}
+
+ # save modified positional parameters for caller
+ func_options_result=$func_run_hooks_result
+}
+
+
+# func_options_prep [ARG]...
+# --------------------------
+# All initialisations required before starting the option parse loop.
+# Note that when calling hook functions, we pass through the list of
+# positional parameters. If a hook function modifies that list, and
+# needs to propogate that back to rest of this script, then the complete
+# modified list must be put in 'func_run_hooks_result' before
+# returning.
+func_hookable func_options_prep
+func_options_prep ()
+{
+ $debug_cmd
+
+ # Option defaults:
+ opt_verbose=false
+ opt_warning_types=
+
+ func_run_hooks func_options_prep ${1+"$@"}
+
+ # save modified positional parameters for caller
+ func_options_prep_result=$func_run_hooks_result
+}
+
+
+# func_parse_options [ARG]...
+# ---------------------------
+# The main option parsing loop.
+func_hookable func_parse_options
+func_parse_options ()
+{
+ $debug_cmd
+
+ func_parse_options_result=
+
+ # this just eases exit handling
+ while test $# -gt 0; do
+ # Defer to hook functions for initial option parsing, so they
+ # get priority in the event of reusing an option name.
+ func_run_hooks func_parse_options ${1+"$@"}
+
+ # Adjust func_parse_options positional parameters to match
+ eval set dummy "$func_run_hooks_result"; shift
+
+ # Break out of the loop if we already parsed every option.
+ test $# -gt 0 || break
+
+ _G_opt=$1
+ shift
+ case $_G_opt in
+ --debug|-x) debug_cmd='set -x'
+ func_echo "enabling shell trace mode"
+ $debug_cmd
+ ;;
+
+ --no-warnings|--no-warning|--no-warn)
+ set dummy --warnings none ${1+"$@"}
+ shift
+ ;;
+
+ --warnings|--warning|-W)
+ test $# = 0 && func_missing_arg $_G_opt && break
+ case " $warning_categories $1" in
+ *" $1 "*)
+ # trailing space prevents matching last $1 above
+ func_append_uniq opt_warning_types " $1"
+ ;;
+ *all)
+ opt_warning_types=$warning_categories
+ ;;
+ *none)
+ opt_warning_types=none
+ warning_func=:
+ ;;
+ *error)
+ opt_warning_types=$warning_categories
+ warning_func=func_fatal_error
+ ;;
+ *)
+ func_fatal_error \
+ "unsupported warning category: '$1'"
+ ;;
+ esac
+ shift
+ ;;
+
+ --verbose|-v) opt_verbose=: ;;
+ --version) func_version ;;
+ -\?|-h) func_usage ;;
+ --help) func_help ;;
+
+ # Separate optargs to long options (plugins may need this):
+ --*=*) func_split_equals "$_G_opt"
+ set dummy "$func_split_equals_lhs" \
+ "$func_split_equals_rhs" ${1+"$@"}
+ shift
+ ;;
+
+ # Separate optargs to short options:
+ -W*)
+ func_split_short_opt "$_G_opt"
+ set dummy "$func_split_short_opt_name" \
+ "$func_split_short_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ # Separate non-argument short options:
+ -\?*|-h*|-v*|-x*)
+ func_split_short_opt "$_G_opt"
+ set dummy "$func_split_short_opt_name" \
+ "-$func_split_short_opt_arg" ${1+"$@"}
+ shift
+ ;;
+
+ --) break ;;
+ -*) func_fatal_help "unrecognised option: '$_G_opt'" ;;
+ *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
+ esac
+ done
+
+ # save modified positional parameters for caller
+ func_quote_for_eval ${1+"$@"}
+ func_parse_options_result=$func_quote_for_eval_result
+}
+
+
+# func_validate_options [ARG]...
+# ------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+func_hookable func_validate_options
+func_validate_options ()
+{
+ $debug_cmd
+
+ # Display all warnings if -W was not given.
+ test -n "$opt_warning_types" || opt_warning_types=" $warning_categories"
+
+ func_run_hooks func_validate_options ${1+"$@"}
+
+ # Bail if the options were screwed!
+ $exit_cmd $EXIT_FAILURE
+
+ # save modified positional parameters for caller
+ func_validate_options_result=$func_run_hooks_result
+}
+
+
+
+## ----------------- ##
+## Helper functions. ##
+## ----------------- ##
+
+# This section contains the helper functions used by the rest of the
+# hookable option parser framework in ascii-betical order.
+
+
+# func_fatal_help ARG...
+# ----------------------
+# Echo program name prefixed message to standard error, followed by
+# a help hint, and exit.
+func_fatal_help ()
+{
+ $debug_cmd
+
+ eval \$ECHO \""Usage: $usage"\"
+ eval \$ECHO \""$fatal_help"\"
+ func_error ${1+"$@"}
+ exit $EXIT_FAILURE
+}
+
+
+# func_help
+# ---------
+# Echo long help message to standard output and exit.
func_help ()
{
- $opt_debug
+ $debug_cmd
- $SED -n '/^# Usage:/,/# Report bugs to/ {
- :print
- s/^# //
- s/^# *$//
- s*\$progname*'$progname'*
- s*\$host*'"$host"'*
- s*\$SHELL*'"$SHELL"'*
- s*\$LTCC*'"$LTCC"'*
- s*\$LTCFLAGS*'"$LTCFLAGS"'*
- s*\$LD*'"$LD"'*
- s/\$with_gnu_ld/'"$with_gnu_ld"'/
- s/\$automake_version/'"`(${AUTOMAKE-automake} --version) 2>/dev/null |$SED 1q`"'/
- s/\$autoconf_version/'"`(${AUTOCONF-autoconf} --version) 2>/dev/null |$SED 1q`"'/
- p
- d
- }
- /^# .* home page:/b print
- /^# General help using/b print
- ' < "$progpath"
- ret=$?
- if test -z "$1"; then
- exit $ret
- fi
+ func_usage_message
+ $ECHO "$long_help_message"
+ exit 0
}
-# func_missing_arg argname
+
+# func_missing_arg ARGNAME
+# ------------------------
# Echo program name prefixed message to standard error and set global
# exit_cmd.
func_missing_arg ()
{
- $opt_debug
+ $debug_cmd
- func_error "missing argument for $1."
+ func_error "Missing argument for '$1'."
exit_cmd=exit
}
-# func_split_short_opt shortopt
+# func_split_equals STRING
+# ------------------------
+# Set func_split_equals_lhs and func_split_equals_rhs shell variables after
+# splitting STRING at the '=' sign.
+test -z "$_G_HAVE_XSI_OPS" \
+ && (eval 'x=a/b/c;
+ test 5aa/bb/cc = "${#x}${x%%/*}${x%/*}${x#*/}${x##*/}"') 2>/dev/null \
+ && _G_HAVE_XSI_OPS=yes
+
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+ # This is an XSI compatible shell, allowing a faster implementation...
+ eval 'func_split_equals ()
+ {
+ $debug_cmd
+
+ func_split_equals_lhs=${1%%=*}
+ func_split_equals_rhs=${1#*=}
+ test "x$func_split_equals_lhs" = "x$1" \
+ && func_split_equals_rhs=
+ }'
+else
+ # ...otherwise fall back to using expr, which is often a shell builtin.
+ func_split_equals ()
+ {
+ $debug_cmd
+
+ func_split_equals_lhs=`expr "x$1" : 'x\([^=]*\)'`
+ func_split_equals_rhs=
+ test "x$func_split_equals_lhs" = "x$1" \
+ || func_split_equals_rhs=`expr "x$1" : 'x[^=]*=\(.*\)$'`
+ }
+fi #func_split_equals
+
+
+# func_split_short_opt SHORTOPT
+# -----------------------------
# Set func_split_short_opt_name and func_split_short_opt_arg shell
# variables after splitting SHORTOPT after the 2nd character.
-func_split_short_opt ()
+if test yes = "$_G_HAVE_XSI_OPS"
+then
+ # This is an XSI compatible shell, allowing a faster implementation...
+ eval 'func_split_short_opt ()
+ {
+ $debug_cmd
+
+ func_split_short_opt_arg=${1#??}
+ func_split_short_opt_name=${1%"$func_split_short_opt_arg"}
+ }'
+else
+ # ...otherwise fall back to using expr, which is often a shell builtin.
+ func_split_short_opt ()
+ {
+ $debug_cmd
+
+ func_split_short_opt_name=`expr "x$1" : 'x-\(.\)'`
+ func_split_short_opt_arg=`expr "x$1" : 'x-.\(.*\)$'`
+ }
+fi #func_split_short_opt
+
+
+# func_usage
+# ----------
+# Echo short help message to standard output and exit.
+func_usage ()
{
- my_sed_short_opt='1s/^\(..\).*$/\1/;q'
- my_sed_short_rest='1s/^..\(.*\)$/\1/;q'
+ $debug_cmd
- func_split_short_opt_name=`$ECHO "$1" | $SED "$my_sed_short_opt"`
- func_split_short_opt_arg=`$ECHO "$1" | $SED "$my_sed_short_rest"`
-} # func_split_short_opt may be replaced by extended shell implementation
+ func_usage_message
+ $ECHO "Run '$progname --help |${PAGER-more}' for full usage"
+ exit 0
+}
-# func_split_long_opt longopt
-# Set func_split_long_opt_name and func_split_long_opt_arg shell
-# variables after splitting LONGOPT at the `=' sign.
-func_split_long_opt ()
+# func_usage_message
+# ------------------
+# Echo short help message to standard output.
+func_usage_message ()
{
- my_sed_long_opt='1s/^\(--[^=]*\)=.*/\1/;q'
- my_sed_long_arg='1s/^--[^=]*=//'
+ $debug_cmd
- func_split_long_opt_name=`$ECHO "$1" | $SED "$my_sed_long_opt"`
- func_split_long_opt_arg=`$ECHO "$1" | $SED "$my_sed_long_arg"`
-} # func_split_long_opt may be replaced by extended shell implementation
-
-exit_cmd=:
+ eval \$ECHO \""Usage: $usage"\"
+ echo
+ $SED -n 's|^# ||
+ /^Written by/{
+ x;p;x
+ }
+ h
+ /^Written by/q' < "$progpath"
+ echo
+ eval \$ECHO \""$usage_message"\"
+}
-
-
-
-magic="%%%MAGIC variable%%%"
-magic_exe="%%%MAGIC EXE variable%%%"
-
-# Global variables.
-nonopt=
-preserve_args=
-lo2o="s/\\.lo\$/.${objext}/"
-o2lo="s/\\.${objext}\$/.lo/"
-extracted_archives=
-extracted_serial=0
-
-# If this variable is set in any of the actions, the command in it
-# will be execed at the end. This prevents here-documents from being
-# left over by shells.
-exec_cmd=
-
-# func_append var value
-# Append VALUE to the end of shell variable VAR.
-func_append ()
+# func_version
+# ------------
+# Echo version message to standard output and exit.
+func_version ()
{
- eval "${1}=\$${1}\${2}"
-} # func_append may be replaced by extended shell implementation
+ $debug_cmd
-# func_append_quoted var value
-# Quote VALUE and append to the end of shell variable VAR, separated
-# by a space.
-func_append_quoted ()
+ printf '%s\n' "$progname $scriptversion"
+ $SED -n '
+ /(C)/!b go
+ :more
+ /\./!{
+ N
+ s|\n# | |
+ b more
+ }
+ :go
+ /^# Written by /,/# warranty; / {
+ s|^# ||
+ s|^# *$||
+ s|\((C)\)[ 0-9,-]*[ ,-]\([1-9][0-9]* \)|\1 \2|
+ p
+ }
+ /^# Written by / {
+ s|^# ||
+ p
+ }
+ /^warranty; /q' < "$progpath"
+
+ exit $?
+}
+
+
+# Local variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'before-save-hook 'time-stamp)
+# time-stamp-pattern: "10/scriptversion=%:y-%02m-%02d.%02H; # UTC"
+# time-stamp-time-zone: "UTC"
+# End:
+
+# Set a version string.
+scriptversion='(GNU libtool) 2.4.6'
+
+
+# func_echo ARG...
+# ----------------
+# Libtool also displays the current mode in messages, so override
+# funclib.sh func_echo with this custom definition.
+func_echo ()
{
- func_quote_for_eval "${2}"
- eval "${1}=\$${1}\\ \$func_quote_for_eval_result"
-} # func_append_quoted may be replaced by extended shell implementation
+ $debug_cmd
+
+ _G_message=$*
+
+ func_echo_IFS=$IFS
+ IFS=$nl
+ for _G_line in $_G_message; do
+ IFS=$func_echo_IFS
+ $ECHO "$progname${opt_mode+: $opt_mode}: $_G_line"
+ done
+ IFS=$func_echo_IFS
+}
-# func_arith arithmetic-term...
-func_arith ()
+# func_warning ARG...
+# -------------------
+# Libtool warnings are not categorized, so override funclib.sh
+# func_warning with this simpler definition.
+func_warning ()
{
- func_arith_result=`expr "${@}"`
-} # func_arith may be replaced by extended shell implementation
+ $debug_cmd
+
+ $warning_func ${1+"$@"}
+}
-# func_len string
-# STRING may not start with a hyphen.
-func_len ()
+## ---------------- ##
+## Options parsing. ##
+## ---------------- ##
+
+# Hook in the functions to make sure our own options are parsed during
+# the option parsing loop.
+
+usage='$progpath [OPTION]... [MODE-ARG]...'
+
+# Short help message in response to '-h'.
+usage_message="Options:
+ --config show all configuration variables
+ --debug enable verbose shell tracing
+ -n, --dry-run display commands without modifying any files
+ --features display basic configuration information and exit
+ --mode=MODE use operation mode MODE
+ --no-warnings equivalent to '-Wnone'
+ --preserve-dup-deps don't remove duplicate dependency libraries
+ --quiet, --silent don't print informational messages
+ --tag=TAG use configuration variables from tag TAG
+ -v, --verbose print more informational messages than default
+ --version print version information
+ -W, --warnings=CATEGORY report the warnings falling in CATEGORY [all]
+ -h, --help, --help-all print short, long, or detailed help message
+"
+
+# Additional text appended to 'usage_message' in response to '--help'.
+func_help ()
{
- func_len_result=`expr "${1}" : ".*" 2>/dev/null || echo $max_cmd_len`
-} # func_len may be replaced by extended shell implementation
+ $debug_cmd
+
+ func_usage_message
+ $ECHO "$long_help_message
+
+MODE must be one of the following:
+
+ clean remove files from the build directory
+ compile compile a source file into a libtool object
+ execute automatically set library path, then run a program
+ finish complete the installation of libtool libraries
+ install install libraries or executables
+ link create a library or an executable
+ uninstall remove libraries from an installed directory
+
+MODE-ARGS vary depending on the MODE. When passed as first option,
+'--mode=MODE' may be abbreviated as 'MODE' or a unique abbreviation of that.
+Try '$progname --help --mode=MODE' for a more detailed description of MODE.
+
+When reporting a bug, please describe a test case to reproduce it and
+include the following information:
+
+ host-triplet: $host
+ shell: $SHELL
+ compiler: $LTCC
+ compiler flags: $LTCFLAGS
+ linker: $LD (gnu? $with_gnu_ld)
+ version: $progname (GNU libtool) 2.4.6
+ automake: `($AUTOMAKE --version) 2>/dev/null |$SED 1q`
+ autoconf: `($AUTOCONF --version) 2>/dev/null |$SED 1q`
+
+Report bugs to <bug-libtool@gnu.org>.
+GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+General help using GNU software: <http://www.gnu.org/gethelp/>."
+ exit 0
+}
-# func_lo2o object
-func_lo2o ()
-{
- func_lo2o_result=`$ECHO "${1}" | $SED "$lo2o"`
-} # func_lo2o may be replaced by extended shell implementation
+# func_lo2o OBJECT-NAME
+# ---------------------
+# Transform OBJECT-NAME from a '.lo' suffix to the platform specific
+# object suffix.
+
+lo2o=s/\\.lo\$/.$objext/
+o2lo=s/\\.$objext\$/.lo/
+
+if test yes = "$_G_HAVE_XSI_OPS"; then
+ eval 'func_lo2o ()
+ {
+ case $1 in
+ *.lo) func_lo2o_result=${1%.lo}.$objext ;;
+ * ) func_lo2o_result=$1 ;;
+ esac
+ }'
+
+ # func_xform LIBOBJ-OR-SOURCE
+ # ---------------------------
+ # Transform LIBOBJ-OR-SOURCE from a '.o' or '.c' (or otherwise)
+ # suffix to a '.lo' libtool-object suffix.
+ eval 'func_xform ()
+ {
+ func_xform_result=${1%.*}.lo
+ }'
+else
+ # ...otherwise fall back to using sed.
+ func_lo2o ()
+ {
+ func_lo2o_result=`$ECHO "$1" | $SED "$lo2o"`
+ }
+
+ func_xform ()
+ {
+ func_xform_result=`$ECHO "$1" | $SED 's|\.[^.]*$|.lo|'`
+ }
+fi
-# func_xform libobj-or-source
-func_xform ()
-{
- func_xform_result=`$ECHO "${1}" | $SED 's/\.[^.]*$/.lo/'`
-} # func_xform may be replaced by extended shell implementation
-
-
-# func_fatal_configuration arg...
+# func_fatal_configuration ARG...
+# -------------------------------
# Echo program name prefixed message to standard error, followed by
# a configuration failure hint, and exit.
func_fatal_configuration ()
{
- func_error ${1+"$@"}
- func_error "See the $PACKAGE documentation for more information."
- func_fatal_error "Fatal configuration error."
+ func__fatal_error ${1+"$@"} \
+ "See the $PACKAGE documentation for more information." \
+ "Fatal configuration error."
}
# func_config
+# -----------
# Display the configuration for all the tags in this script.
func_config ()
{
@@ -915,17 +2149,19 @@
exit $?
}
+
# func_features
+# -------------
# Display the features supported by this script.
func_features ()
{
echo "host: $host"
- if test "$build_libtool_libs" = yes; then
+ if test yes = "$build_libtool_libs"; then
echo "enable shared libraries"
else
echo "disable shared libraries"
fi
- if test "$build_old_libs" = yes; then
+ if test yes = "$build_old_libs"; then
echo "enable static libraries"
else
echo "disable static libraries"
@@ -934,314 +2170,350 @@
exit $?
}
-# func_enable_tag tagname
+
+# func_enable_tag TAGNAME
+# -----------------------
# Verify that TAGNAME is valid, and either flag an error and exit, or
# enable the TAGNAME tag. We also add TAGNAME to the global $taglist
# variable here.
func_enable_tag ()
{
- # Global variable:
- tagname="$1"
+ # Global variable:
+ tagname=$1
- re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
- re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
- sed_extractcf="/$re_begincf/,/$re_endcf/p"
+ re_begincf="^# ### BEGIN LIBTOOL TAG CONFIG: $tagname\$"
+ re_endcf="^# ### END LIBTOOL TAG CONFIG: $tagname\$"
+ sed_extractcf=/$re_begincf/,/$re_endcf/p
- # Validate tagname.
- case $tagname in
- *[!-_A-Za-z0-9,/]*)
- func_fatal_error "invalid tag name: $tagname"
- ;;
- esac
+ # Validate tagname.
+ case $tagname in
+ *[!-_A-Za-z0-9,/]*)
+ func_fatal_error "invalid tag name: $tagname"
+ ;;
+ esac
- # Don't test for the "default" C tag, as we know it's
- # there but not specially marked.
- case $tagname in
- CC) ;;
+ # Don't test for the "default" C tag, as we know it's
+ # there but not specially marked.
+ case $tagname in
+ CC) ;;
*)
- if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
- taglist="$taglist $tagname"
+ if $GREP "$re_begincf" "$progpath" >/dev/null 2>&1; then
+ taglist="$taglist $tagname"
- # Evaluate the configuration. Be careful to quote the path
- # and the sed script, to avoid splitting on whitespace, but
- # also don't use non-portable quotes within backquotes within
- # quotes we have to do it in 2 steps:
- extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
- eval "$extractedcf"
- else
- func_error "ignoring unknown tag $tagname"
- fi
- ;;
- esac
+ # Evaluate the configuration. Be careful to quote the path
+ # and the sed script, to avoid splitting on whitespace, but
+ # also don't use non-portable quotes within backquotes within
+ # quotes we have to do it in 2 steps:
+ extractedcf=`$SED -n -e "$sed_extractcf" < "$progpath"`
+ eval "$extractedcf"
+ else
+ func_error "ignoring unknown tag $tagname"
+ fi
+ ;;
+ esac
}
+
# func_check_version_match
+# ------------------------
# Ensure that we are using m4 macros, and libtool script from the same
# release of libtool.
func_check_version_match ()
{
- if test "$package_revision" != "$macro_revision"; then
- if test "$VERSION" != "$macro_version"; then
- if test -z "$macro_version"; then
- cat >&2 <<_LT_EOF
+ if test "$package_revision" != "$macro_revision"; then
+ if test "$VERSION" != "$macro_version"; then
+ if test -z "$macro_version"; then
+ cat >&2 <<_LT_EOF
$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
$progname: definition of this LT_INIT comes from an older release.
$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
$progname: and run autoconf again.
_LT_EOF
- else
- cat >&2 <<_LT_EOF
+ else
+ cat >&2 <<_LT_EOF
$progname: Version mismatch error. This is $PACKAGE $VERSION, but the
$progname: definition of this LT_INIT comes from $PACKAGE $macro_version.
$progname: You should recreate aclocal.m4 with macros from $PACKAGE $VERSION
$progname: and run autoconf again.
_LT_EOF
- fi
- else
- cat >&2 <<_LT_EOF
+ fi
+ else
+ cat >&2 <<_LT_EOF
$progname: Version mismatch error. This is $PACKAGE $VERSION, revision $package_revision,
$progname: but the definition of this LT_INIT comes from revision $macro_revision.
$progname: You should recreate aclocal.m4 with macros from revision $package_revision
$progname: of $PACKAGE $VERSION and run autoconf again.
_LT_EOF
- fi
+ fi
- exit $EXIT_MISMATCH
- fi
+ exit $EXIT_MISMATCH
+ fi
}
-# Shorthand for --mode=foo, only valid as the first argument
-case $1 in
-clean|clea|cle|cl)
- shift; set dummy --mode clean ${1+"$@"}; shift
- ;;
-compile|compil|compi|comp|com|co|c)
- shift; set dummy --mode compile ${1+"$@"}; shift
- ;;
-execute|execut|execu|exec|exe|ex|e)
- shift; set dummy --mode execute ${1+"$@"}; shift
- ;;
-finish|finis|fini|fin|fi|f)
- shift; set dummy --mode finish ${1+"$@"}; shift
- ;;
-install|instal|insta|inst|ins|in|i)
- shift; set dummy --mode install ${1+"$@"}; shift
- ;;
-link|lin|li|l)
- shift; set dummy --mode link ${1+"$@"}; shift
- ;;
-uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
- shift; set dummy --mode uninstall ${1+"$@"}; shift
- ;;
-esac
-
-
-
-# Option defaults:
-opt_debug=:
-opt_dry_run=false
-opt_config=false
-opt_preserve_dup_deps=false
-opt_features=false
-opt_finish=false
-opt_help=false
-opt_help_all=false
-opt_silent=:
-opt_warning=:
-opt_verbose=:
-opt_silent=false
-opt_verbose=false
-
-
-# Parse options once, thoroughly. This comes as soon as possible in the
-# script to make things like `--version' happen as quickly as we can.
+# libtool_options_prep [ARG]...
+# -----------------------------
+# Preparation for options parsed by libtool.
+libtool_options_prep ()
{
- # this just eases exit handling
- while test $# -gt 0; do
- opt="$1"
- shift
- case $opt in
- --debug|-x) opt_debug='set -x'
- func_echo "enabling shell trace mode"
- $opt_debug
- ;;
- --dry-run|--dryrun|-n)
- opt_dry_run=:
- ;;
- --config)
- opt_config=:
-func_config
- ;;
- --dlopen|-dlopen)
- optarg="$1"
- opt_dlopen="${opt_dlopen+$opt_dlopen
-}$optarg"
- shift
- ;;
- --preserve-dup-deps)
- opt_preserve_dup_deps=:
- ;;
- --features)
- opt_features=:
-func_features
- ;;
- --finish)
- opt_finish=:
-set dummy --mode finish ${1+"$@"}; shift
- ;;
- --help)
- opt_help=:
- ;;
- --help-all)
- opt_help_all=:
-opt_help=': help-all'
- ;;
- --mode)
- test $# = 0 && func_missing_arg $opt && break
- optarg="$1"
- opt_mode="$optarg"
-case $optarg in
- # Valid mode arguments:
- clean|compile|execute|finish|install|link|relink|uninstall) ;;
+ $debug_mode
- # Catch anything else as an error
- *) func_error "invalid argument for $opt"
- exit_cmd=exit
- break
- ;;
-esac
- shift
- ;;
- --no-silent|--no-quiet)
- opt_silent=false
-func_append preserve_args " $opt"
- ;;
- --no-warning|--no-warn)
- opt_warning=false
-func_append preserve_args " $opt"
- ;;
- --no-verbose)
- opt_verbose=false
-func_append preserve_args " $opt"
- ;;
- --silent|--quiet)
- opt_silent=:
-func_append preserve_args " $opt"
- opt_verbose=false
- ;;
- --verbose|-v)
- opt_verbose=:
-func_append preserve_args " $opt"
-opt_silent=false
- ;;
- --tag)
- test $# = 0 && func_missing_arg $opt && break
- optarg="$1"
- opt_tag="$optarg"
-func_append preserve_args " $opt $optarg"
-func_enable_tag "$optarg"
- shift
- ;;
+ # Option defaults:
+ opt_config=false
+ opt_dlopen=
+ opt_dry_run=false
+ opt_help=false
+ opt_mode=
+ opt_preserve_dup_deps=false
+ opt_quiet=false
- -\?|-h) func_usage ;;
- --help) func_help ;;
- --version) func_version ;;
+ nonopt=
+ preserve_args=
- # Separate optargs to long options:
- --*=*)
- func_split_long_opt "$opt"
- set dummy "$func_split_long_opt_name" "$func_split_long_opt_arg" ${1+"$@"}
- shift
- ;;
-
- # Separate non-argument short options:
- -\?*|-h*|-n*|-v*)
- func_split_short_opt "$opt"
- set dummy "$func_split_short_opt_name" "-$func_split_short_opt_arg" ${1+"$@"}
- shift
- ;;
-
- --) break ;;
- -*) func_fatal_help "unrecognized option \`$opt'" ;;
- *) set dummy "$opt" ${1+"$@"}; shift; break ;;
+ # Shorthand for --mode=foo, only valid as the first argument
+ case $1 in
+ clean|clea|cle|cl)
+ shift; set dummy --mode clean ${1+"$@"}; shift
+ ;;
+ compile|compil|compi|comp|com|co|c)
+ shift; set dummy --mode compile ${1+"$@"}; shift
+ ;;
+ execute|execut|execu|exec|exe|ex|e)
+ shift; set dummy --mode execute ${1+"$@"}; shift
+ ;;
+ finish|finis|fini|fin|fi|f)
+ shift; set dummy --mode finish ${1+"$@"}; shift
+ ;;
+ install|instal|insta|inst|ins|in|i)
+ shift; set dummy --mode install ${1+"$@"}; shift
+ ;;
+ link|lin|li|l)
+ shift; set dummy --mode link ${1+"$@"}; shift
+ ;;
+ uninstall|uninstal|uninsta|uninst|unins|unin|uni|un|u)
+ shift; set dummy --mode uninstall ${1+"$@"}; shift
+ ;;
esac
- done
- # Validate options:
-
- # save first non-option argument
- if test "$#" -gt 0; then
- nonopt="$opt"
- shift
- fi
-
- # preserve --debug
- test "$opt_debug" = : || func_append preserve_args " --debug"
-
- case $host in
- *cygwin* | *mingw* | *pw32* | *cegcc*)
- # don't eliminate duplications in $postdeps and $predeps
- opt_duplicate_compiler_generated_deps=:
- ;;
- *)
- opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
- ;;
- esac
-
- $opt_help || {
- # Sanity checks first:
- func_check_version_match
-
- if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then
- func_fatal_configuration "not configured to build any kind of library"
- fi
-
- # Darwin sucks
- eval std_shrext=\"$shrext_cmds\"
-
- # Only execute mode is allowed to have -dlopen flags.
- if test -n "$opt_dlopen" && test "$opt_mode" != execute; then
- func_error "unrecognized option \`-dlopen'"
- $ECHO "$help" 1>&2
- exit $EXIT_FAILURE
- fi
-
- # Change the help message to a mode-specific one.
- generic_help="$help"
- help="Try \`$progname --help --mode=$opt_mode' for more information."
- }
-
-
- # Bail if the options were screwed
- $exit_cmd $EXIT_FAILURE
+ # Pass back the list of options.
+ func_quote_for_eval ${1+"$@"}
+ libtool_options_prep_result=$func_quote_for_eval_result
}
+func_add_hook func_options_prep libtool_options_prep
+# libtool_parse_options [ARG]...
+# ---------------------------------
+# Provide handling for libtool specific options.
+libtool_parse_options ()
+{
+ $debug_cmd
+
+ # Perform our own loop to consume as many options as possible in
+ # each iteration.
+ while test $# -gt 0; do
+ _G_opt=$1
+ shift
+ case $_G_opt in
+ --dry-run|--dryrun|-n)
+ opt_dry_run=:
+ ;;
+
+ --config) func_config ;;
+
+ --dlopen|-dlopen)
+ opt_dlopen="${opt_dlopen+$opt_dlopen
+}$1"
+ shift
+ ;;
+
+ --preserve-dup-deps)
+ opt_preserve_dup_deps=: ;;
+
+ --features) func_features ;;
+
+ --finish) set dummy --mode finish ${1+"$@"}; shift ;;
+
+ --help) opt_help=: ;;
+
+ --help-all) opt_help=': help-all' ;;
+
+ --mode) test $# = 0 && func_missing_arg $_G_opt && break
+ opt_mode=$1
+ case $1 in
+ # Valid mode arguments:
+ clean|compile|execute|finish|install|link|relink|uninstall) ;;
+
+ # Catch anything else as an error
+ *) func_error "invalid argument for $_G_opt"
+ exit_cmd=exit
+ break
+ ;;
+ esac
+ shift
+ ;;
+
+ --no-silent|--no-quiet)
+ opt_quiet=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --no-warnings|--no-warning|--no-warn)
+ opt_warning=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --no-verbose)
+ opt_verbose=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --silent|--quiet)
+ opt_quiet=:
+ opt_verbose=false
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ --tag) test $# = 0 && func_missing_arg $_G_opt && break
+ opt_tag=$1
+ func_append preserve_args " $_G_opt $1"
+ func_enable_tag "$1"
+ shift
+ ;;
+
+ --verbose|-v) opt_quiet=false
+ opt_verbose=:
+ func_append preserve_args " $_G_opt"
+ ;;
+
+ # An option not handled by this hook function:
+ *) set dummy "$_G_opt" ${1+"$@"}; shift; break ;;
+ esac
+ done
+
+
+ # save modified positional parameters for caller
+ func_quote_for_eval ${1+"$@"}
+ libtool_parse_options_result=$func_quote_for_eval_result
+}
+func_add_hook func_parse_options libtool_parse_options
+
+
+
+# libtool_validate_options [ARG]...
+# ---------------------------------
+# Perform any sanity checks on option settings and/or unconsumed
+# arguments.
+libtool_validate_options ()
+{
+ # save first non-option argument
+ if test 0 -lt $#; then
+ nonopt=$1
+ shift
+ fi
+
+ # preserve --debug
+ test : = "$debug_cmd" || func_append preserve_args " --debug"
+
+ case $host in
+ # Solaris2 added to fix http://debbugs.gnu.org/cgi/bugreport.cgi?bug=16452
+ # see also: http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59788
+ *cygwin* | *mingw* | *pw32* | *cegcc* | *solaris2* | *os2*)
+ # don't eliminate duplications in $postdeps and $predeps
+ opt_duplicate_compiler_generated_deps=:
+ ;;
+ *)
+ opt_duplicate_compiler_generated_deps=$opt_preserve_dup_deps
+ ;;
+ esac
+
+ $opt_help || {
+ # Sanity checks first:
+ func_check_version_match
+
+ test yes != "$build_libtool_libs" \
+ && test yes != "$build_old_libs" \
+ && func_fatal_configuration "not configured to build any kind of library"
+
+ # Darwin sucks
+ eval std_shrext=\"$shrext_cmds\"
+
+ # Only execute mode is allowed to have -dlopen flags.
+ if test -n "$opt_dlopen" && test execute != "$opt_mode"; then
+ func_error "unrecognized option '-dlopen'"
+ $ECHO "$help" 1>&2
+ exit $EXIT_FAILURE
+ fi
+
+ # Change the help message to a mode-specific one.
+ generic_help=$help
+ help="Try '$progname --help --mode=$opt_mode' for more information."
+ }
+
+ # Pass back the unparsed argument list
+ func_quote_for_eval ${1+"$@"}
+ libtool_validate_options_result=$func_quote_for_eval_result
+}
+func_add_hook func_validate_options libtool_validate_options
+
+
+# Process options as early as possible so that --help and --version
+# can return quickly.
+func_options ${1+"$@"}
+eval set dummy "$func_options_result"; shift
+
## ----------- ##
## Main. ##
## ----------- ##
+magic='%%%MAGIC variable%%%'
+magic_exe='%%%MAGIC EXE variable%%%'
+
+# Global variables.
+extracted_archives=
+extracted_serial=0
+
+# If this variable is set in any of the actions, the command in it
+# will be execed at the end. This prevents here-documents from being
+# left over by shells.
+exec_cmd=
+
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# func_generated_by_libtool
+# True iff stdin has been generated by Libtool. This function is only
+# a basic sanity check; it will hardly flush out determined imposters.
+func_generated_by_libtool_p ()
+{
+ $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+}
+
# func_lalib_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
+# True iff FILE is a libtool '.la' library or '.lo' object file.
# This function is only a basic sanity check; it will hardly flush out
# determined imposters.
func_lalib_p ()
{
test -f "$1" &&
- $SED -e 4q "$1" 2>/dev/null \
- | $GREP "^# Generated by .*$PACKAGE" > /dev/null 2>&1
+ $SED -e 4q "$1" 2>/dev/null | func_generated_by_libtool_p
}
# func_lalib_unsafe_p file
-# True iff FILE is a libtool `.la' library or `.lo' object file.
+# True iff FILE is a libtool '.la' library or '.lo' object file.
# This function implements the same check as func_lalib_p without
# resorting to external programs. To this end, it redirects stdin and
# closes it afterwards, without saving the original file descriptor.
# As a safety measure, use it only where a negative result would be
-# fatal anyway. Works if `file' does not exist.
+# fatal anyway. Works if 'file' does not exist.
func_lalib_unsafe_p ()
{
lalib_p=no
@@ -1249,13 +2521,13 @@
for lalib_p_l in 1 2 3 4
do
read lalib_p_line
- case "$lalib_p_line" in
+ case $lalib_p_line in
\#\ Generated\ by\ *$PACKAGE* ) lalib_p=yes; break;;
esac
done
exec 0<&5 5<&-
fi
- test "$lalib_p" = yes
+ test yes = "$lalib_p"
}
# func_ltwrapper_script_p file
@@ -1264,7 +2536,8 @@
# determined imposters.
func_ltwrapper_script_p ()
{
- func_lalib_p "$1"
+ test -f "$1" &&
+ $lt_truncate_bin < "$1" 2>/dev/null | func_generated_by_libtool_p
}
# func_ltwrapper_executable_p file
@@ -1289,7 +2562,7 @@
{
func_dirname_and_basename "$1" "" "."
func_stripname '' '.exe' "$func_basename_result"
- func_ltwrapper_scriptname_result="$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper"
+ func_ltwrapper_scriptname_result=$func_dirname_result/$objdir/${func_stripname_result}_ltshwrapper
}
# func_ltwrapper_p file
@@ -1308,11 +2581,13 @@
# FAIL_CMD may read-access the current command in variable CMD!
func_execute_cmds ()
{
- $opt_debug
+ $debug_cmd
+
save_ifs=$IFS; IFS='~'
for cmd in $1; do
- IFS=$save_ifs
+ IFS=$sp$nl
eval cmd=\"$cmd\"
+ IFS=$save_ifs
func_show_eval "$cmd" "${2-:}"
done
IFS=$save_ifs
@@ -1324,10 +2599,11 @@
# Note that it is not necessary on cygwin/mingw to append a dot to
# FILE even if both FILE and FILE.exe exist: automatic-append-.exe
# behavior happens only for exec(3), not for open(2)! Also, sourcing
-# `FILE.' does not work on cygwin managed mounts.
+# 'FILE.' does not work on cygwin managed mounts.
func_source ()
{
- $opt_debug
+ $debug_cmd
+
case $1 in
*/* | *\\*) . "$1" ;;
*) . "./$1" ;;
@@ -1354,10 +2630,10 @@
# store the result into func_replace_sysroot_result.
func_replace_sysroot ()
{
- case "$lt_sysroot:$1" in
+ case $lt_sysroot:$1 in
?*:"$lt_sysroot"*)
func_stripname "$lt_sysroot" '' "$1"
- func_replace_sysroot_result="=$func_stripname_result"
+ func_replace_sysroot_result='='$func_stripname_result
;;
*)
# Including no sysroot.
@@ -1374,7 +2650,8 @@
# arg is usually of the form 'gcc ...'
func_infer_tag ()
{
- $opt_debug
+ $debug_cmd
+
if test -n "$available_tags" && test -z "$tagname"; then
CC_quoted=
for arg in $CC; do
@@ -1393,7 +2670,7 @@
for z in $available_tags; do
if $GREP "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then
# Evaluate the configuration.
- eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
+ eval "`$SED -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"
CC_quoted=
for arg in $CC; do
# Double-quote args containing other shell metacharacters.
@@ -1418,7 +2695,7 @@
# line option must be used.
if test -z "$tagname"; then
func_echo "unable to infer tagged configuration"
- func_fatal_error "specify a tag with \`--tag'"
+ func_fatal_error "specify a tag with '--tag'"
# else
# func_verbose "using $tagname tagged configuration"
fi
@@ -1434,15 +2711,15 @@
# but don't create it if we're doing a dry run.
func_write_libtool_object ()
{
- write_libobj=${1}
- if test "$build_libtool_libs" = yes; then
- write_lobj=\'${2}\'
+ write_libobj=$1
+ if test yes = "$build_libtool_libs"; then
+ write_lobj=\'$2\'
else
write_lobj=none
fi
- if test "$build_old_libs" = yes; then
- write_oldobj=\'${3}\'
+ if test yes = "$build_old_libs"; then
+ write_oldobj=\'$3\'
else
write_oldobj=none
fi
@@ -1450,7 +2727,7 @@
$opt_dry_run || {
cat >${write_libobj}T <<EOF
# $write_libobj - a libtool object file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
#
# Please DO NOT delete this file!
# It is necessary for linking the library.
@@ -1462,7 +2739,7 @@
non_pic_object=$write_oldobj
EOF
- $MV "${write_libobj}T" "${write_libobj}"
+ $MV "${write_libobj}T" "$write_libobj"
}
}
@@ -1482,8 +2759,9 @@
# be empty on error (or when ARG is empty)
func_convert_core_file_wine_to_w32 ()
{
- $opt_debug
- func_convert_core_file_wine_to_w32_result="$1"
+ $debug_cmd
+
+ func_convert_core_file_wine_to_w32_result=$1
if test -n "$1"; then
# Unfortunately, winepath does not exit with a non-zero error code, so we
# are forced to check the contents of stdout. On the other hand, if the
@@ -1491,9 +2769,9 @@
# *an error message* to stdout. So we must check for both error code of
# zero AND non-empty stdout, which explains the odd construction:
func_convert_core_file_wine_to_w32_tmp=`winepath -w "$1" 2>/dev/null`
- if test "$?" -eq 0 && test -n "${func_convert_core_file_wine_to_w32_tmp}"; then
+ if test "$?" -eq 0 && test -n "$func_convert_core_file_wine_to_w32_tmp"; then
func_convert_core_file_wine_to_w32_result=`$ECHO "$func_convert_core_file_wine_to_w32_tmp" |
- $SED -e "$lt_sed_naive_backslashify"`
+ $SED -e "$sed_naive_backslashify"`
else
func_convert_core_file_wine_to_w32_result=
fi
@@ -1514,18 +2792,19 @@
# are convertible, then the result may be empty.
func_convert_core_path_wine_to_w32 ()
{
- $opt_debug
+ $debug_cmd
+
# unfortunately, winepath doesn't convert paths, only file names
- func_convert_core_path_wine_to_w32_result=""
+ func_convert_core_path_wine_to_w32_result=
if test -n "$1"; then
oldIFS=$IFS
IFS=:
for func_convert_core_path_wine_to_w32_f in $1; do
IFS=$oldIFS
func_convert_core_file_wine_to_w32 "$func_convert_core_path_wine_to_w32_f"
- if test -n "$func_convert_core_file_wine_to_w32_result" ; then
+ if test -n "$func_convert_core_file_wine_to_w32_result"; then
if test -z "$func_convert_core_path_wine_to_w32_result"; then
- func_convert_core_path_wine_to_w32_result="$func_convert_core_file_wine_to_w32_result"
+ func_convert_core_path_wine_to_w32_result=$func_convert_core_file_wine_to_w32_result
else
func_append func_convert_core_path_wine_to_w32_result ";$func_convert_core_file_wine_to_w32_result"
fi
@@ -1554,7 +2833,8 @@
# environment variable; do not put it in $PATH.
func_cygpath ()
{
- $opt_debug
+ $debug_cmd
+
if test -n "$LT_CYGPATH" && test -f "$LT_CYGPATH"; then
func_cygpath_result=`$LT_CYGPATH "$@" 2>/dev/null`
if test "$?" -ne 0; then
@@ -1563,7 +2843,7 @@
fi
else
func_cygpath_result=
- func_error "LT_CYGPATH is empty or specifies non-existent file: \`$LT_CYGPATH'"
+ func_error "LT_CYGPATH is empty or specifies non-existent file: '$LT_CYGPATH'"
fi
}
#end: func_cygpath
@@ -1574,10 +2854,11 @@
# result in func_convert_core_msys_to_w32_result.
func_convert_core_msys_to_w32 ()
{
- $opt_debug
+ $debug_cmd
+
# awkward: cmd appends spaces to result
func_convert_core_msys_to_w32_result=`( cmd //c echo "$1" ) 2>/dev/null |
- $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
+ $SED -e 's/[ ]*$//' -e "$sed_naive_backslashify"`
}
#end: func_convert_core_msys_to_w32
@@ -1588,13 +2869,14 @@
# func_to_host_file_result to ARG1).
func_convert_file_check ()
{
- $opt_debug
- if test -z "$2" && test -n "$1" ; then
+ $debug_cmd
+
+ if test -z "$2" && test -n "$1"; then
func_error "Could not determine host file name corresponding to"
- func_error " \`$1'"
+ func_error " '$1'"
func_error "Continuing, but uninstalled executables may not work."
# Fallback:
- func_to_host_file_result="$1"
+ func_to_host_file_result=$1
fi
}
# end func_convert_file_check
@@ -1606,10 +2888,11 @@
# func_to_host_file_result to a simplistic fallback value (see below).
func_convert_path_check ()
{
- $opt_debug
+ $debug_cmd
+
if test -z "$4" && test -n "$3"; then
func_error "Could not determine the host path corresponding to"
- func_error " \`$3'"
+ func_error " '$3'"
func_error "Continuing, but uninstalled executables may not work."
# Fallback. This is a deliberately simplistic "conversion" and
# should not be "improved". See libtool.info.
@@ -1618,7 +2901,7 @@
func_to_host_path_result=`echo "$3" |
$SED -e "$lt_replace_pathsep_chars"`
else
- func_to_host_path_result="$3"
+ func_to_host_path_result=$3
fi
fi
}
@@ -1630,9 +2913,10 @@
# and appending REPL if ORIG matches BACKPAT.
func_convert_path_front_back_pathsep ()
{
- $opt_debug
+ $debug_cmd
+
case $4 in
- $1 ) func_to_host_path_result="$3$func_to_host_path_result"
+ $1 ) func_to_host_path_result=$3$func_to_host_path_result
;;
esac
case $4 in
@@ -1646,7 +2930,7 @@
##################################################
# $build to $host FILE NAME CONVERSION FUNCTIONS #
##################################################
-# invoked via `$to_host_file_cmd ARG'
+# invoked via '$to_host_file_cmd ARG'
#
# In each case, ARG is the path to be converted from $build to $host format.
# Result will be available in $func_to_host_file_result.
@@ -1657,7 +2941,8 @@
# in func_to_host_file_result.
func_to_host_file ()
{
- $opt_debug
+ $debug_cmd
+
$to_host_file_cmd "$1"
}
# end func_to_host_file
@@ -1669,7 +2954,8 @@
# in (the comma separated) LAZY, no conversion takes place.
func_to_tool_file ()
{
- $opt_debug
+ $debug_cmd
+
case ,$2, in
*,"$to_tool_file_cmd",*)
func_to_tool_file_result=$1
@@ -1687,7 +2973,7 @@
# Copy ARG to func_to_host_file_result.
func_convert_file_noop ()
{
- func_to_host_file_result="$1"
+ func_to_host_file_result=$1
}
# end func_convert_file_noop
@@ -1698,11 +2984,12 @@
# func_to_host_file_result.
func_convert_file_msys_to_w32 ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
func_convert_core_msys_to_w32 "$1"
- func_to_host_file_result="$func_convert_core_msys_to_w32_result"
+ func_to_host_file_result=$func_convert_core_msys_to_w32_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
@@ -1714,8 +3001,9 @@
# func_to_host_file_result.
func_convert_file_cygwin_to_w32 ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
# because $build is cygwin, we call "the" cygpath in $PATH; no need to use
# LT_CYGPATH in this case.
@@ -1731,11 +3019,12 @@
# and a working winepath. Returns result in func_to_host_file_result.
func_convert_file_nix_to_w32 ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
func_convert_core_file_wine_to_w32 "$1"
- func_to_host_file_result="$func_convert_core_file_wine_to_w32_result"
+ func_to_host_file_result=$func_convert_core_file_wine_to_w32_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
@@ -1747,12 +3036,13 @@
# Returns result in func_to_host_file_result.
func_convert_file_msys_to_cygwin ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
func_convert_core_msys_to_w32 "$1"
func_cygpath -u "$func_convert_core_msys_to_w32_result"
- func_to_host_file_result="$func_cygpath_result"
+ func_to_host_file_result=$func_cygpath_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
@@ -1765,13 +3055,14 @@
# in func_to_host_file_result.
func_convert_file_nix_to_cygwin ()
{
- $opt_debug
- func_to_host_file_result="$1"
+ $debug_cmd
+
+ func_to_host_file_result=$1
if test -n "$1"; then
# convert from *nix to w32, then use cygpath to convert from w32 to cygwin.
func_convert_core_file_wine_to_w32 "$1"
func_cygpath -u "$func_convert_core_file_wine_to_w32_result"
- func_to_host_file_result="$func_cygpath_result"
+ func_to_host_file_result=$func_cygpath_result
fi
func_convert_file_check "$1" "$func_to_host_file_result"
}
@@ -1781,7 +3072,7 @@
#############################################
# $build to $host PATH CONVERSION FUNCTIONS #
#############################################
-# invoked via `$to_host_path_cmd ARG'
+# invoked via '$to_host_path_cmd ARG'
#
# In each case, ARG is the path to be converted from $build to $host format.
# The result will be available in $func_to_host_path_result.
@@ -1805,10 +3096,11 @@
to_host_path_cmd=
func_init_to_host_path_cmd ()
{
- $opt_debug
+ $debug_cmd
+
if test -z "$to_host_path_cmd"; then
func_stripname 'func_convert_file_' '' "$to_host_file_cmd"
- to_host_path_cmd="func_convert_path_${func_stripname_result}"
+ to_host_path_cmd=func_convert_path_$func_stripname_result
fi
}
@@ -1818,7 +3110,8 @@
# in func_to_host_path_result.
func_to_host_path ()
{
- $opt_debug
+ $debug_cmd
+
func_init_to_host_path_cmd
$to_host_path_cmd "$1"
}
@@ -1829,7 +3122,7 @@
# Copy ARG to func_to_host_path_result.
func_convert_path_noop ()
{
- func_to_host_path_result="$1"
+ func_to_host_path_result=$1
}
# end func_convert_path_noop
@@ -1840,8 +3133,9 @@
# func_to_host_path_result.
func_convert_path_msys_to_w32 ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# Remove leading and trailing path separator characters from ARG. MSYS
# behavior is inconsistent here; cygpath turns them into '.;' and ';.';
@@ -1849,7 +3143,7 @@
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
- func_to_host_path_result="$func_convert_core_msys_to_w32_result"
+ func_to_host_path_result=$func_convert_core_msys_to_w32_result
func_convert_path_check : ";" \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
@@ -1863,8 +3157,9 @@
# func_to_host_file_result.
func_convert_path_cygwin_to_w32 ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# See func_convert_path_msys_to_w32:
func_stripname : : "$1"
@@ -1883,14 +3178,15 @@
# a working winepath. Returns result in func_to_host_file_result.
func_convert_path_nix_to_w32 ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# See func_convert_path_msys_to_w32:
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
- func_to_host_path_result="$func_convert_core_path_wine_to_w32_result"
+ func_to_host_path_result=$func_convert_core_path_wine_to_w32_result
func_convert_path_check : ";" \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" ";" "$1"
@@ -1904,15 +3200,16 @@
# Returns result in func_to_host_file_result.
func_convert_path_msys_to_cygwin ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# See func_convert_path_msys_to_w32:
func_stripname : : "$1"
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_msys_to_w32 "$func_to_host_path_tmp1"
func_cygpath -u -p "$func_convert_core_msys_to_w32_result"
- func_to_host_path_result="$func_cygpath_result"
+ func_to_host_path_result=$func_cygpath_result
func_convert_path_check : : \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" : "$1"
@@ -1927,8 +3224,9 @@
# func_to_host_file_result.
func_convert_path_nix_to_cygwin ()
{
- $opt_debug
- func_to_host_path_result="$1"
+ $debug_cmd
+
+ func_to_host_path_result=$1
if test -n "$1"; then
# Remove leading and trailing path separator characters from
# ARG. msys behavior is inconsistent here, cygpath turns them
@@ -1937,7 +3235,7 @@
func_to_host_path_tmp1=$func_stripname_result
func_convert_core_path_wine_to_w32 "$func_to_host_path_tmp1"
func_cygpath -u -p "$func_convert_core_path_wine_to_w32_result"
- func_to_host_path_result="$func_cygpath_result"
+ func_to_host_path_result=$func_cygpath_result
func_convert_path_check : : \
"$func_to_host_path_tmp1" "$func_to_host_path_result"
func_convert_path_front_back_pathsep ":*" "*:" : "$1"
@@ -1946,13 +3244,31 @@
# end func_convert_path_nix_to_cygwin
+# func_dll_def_p FILE
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with _LT_DLL_DEF_P in libtool.m4
+func_dll_def_p ()
+{
+ $debug_cmd
+
+ func_dll_def_p_tmp=`$SED -n \
+ -e 's/^[ ]*//' \
+ -e '/^\(;.*\)*$/d' \
+ -e 's/^\(EXPORTS\|LIBRARY\)\([ ].*\)*$/DEF/p' \
+ -e q \
+ "$1"`
+ test DEF = "$func_dll_def_p_tmp"
+}
+
+
# func_mode_compile arg...
func_mode_compile ()
{
- $opt_debug
+ $debug_cmd
+
# Get the compilation command and the source file.
base_compile=
- srcfile="$nonopt" # always keep a non-empty value in "srcfile"
+ srcfile=$nonopt # always keep a non-empty value in "srcfile"
suppress_opt=yes
suppress_output=
arg_mode=normal
@@ -1965,12 +3281,12 @@
case $arg_mode in
arg )
# do not "continue". Instead, add this to base_compile
- lastarg="$arg"
+ lastarg=$arg
arg_mode=normal
;;
target )
- libobj="$arg"
+ libobj=$arg
arg_mode=normal
continue
;;
@@ -1980,7 +3296,7 @@
case $arg in
-o)
test -n "$libobj" && \
- func_fatal_error "you cannot specify \`-o' more than once"
+ func_fatal_error "you cannot specify '-o' more than once"
arg_mode=target
continue
;;
@@ -2009,12 +3325,12 @@
func_stripname '-Wc,' '' "$arg"
args=$func_stripname_result
lastarg=
- save_ifs="$IFS"; IFS=','
+ save_ifs=$IFS; IFS=,
for arg in $args; do
- IFS="$save_ifs"
+ IFS=$save_ifs
func_append_quoted lastarg "$arg"
done
- IFS="$save_ifs"
+ IFS=$save_ifs
func_stripname ' ' '' "$lastarg"
lastarg=$func_stripname_result
@@ -2027,8 +3343,8 @@
# Accept the current argument as the source file.
# The previous "srcfile" becomes the current argument.
#
- lastarg="$srcfile"
- srcfile="$arg"
+ lastarg=$srcfile
+ srcfile=$arg
;;
esac # case $arg
;;
@@ -2043,13 +3359,13 @@
func_fatal_error "you must specify an argument for -Xcompile"
;;
target)
- func_fatal_error "you must specify a target with \`-o'"
+ func_fatal_error "you must specify a target with '-o'"
;;
*)
# Get the name of the library object.
test -z "$libobj" && {
func_basename "$srcfile"
- libobj="$func_basename_result"
+ libobj=$func_basename_result
}
;;
esac
@@ -2069,7 +3385,7 @@
case $libobj in
*.lo) func_lo2o "$libobj"; obj=$func_lo2o_result ;;
*)
- func_fatal_error "cannot determine name of library object from \`$libobj'"
+ func_fatal_error "cannot determine name of library object from '$libobj'"
;;
esac
@@ -2078,8 +3394,8 @@
for arg in $later; do
case $arg in
-shared)
- test "$build_libtool_libs" != yes && \
- func_fatal_configuration "can not build a shared library"
+ test yes = "$build_libtool_libs" \
+ || func_fatal_configuration "cannot build a shared library"
build_old_libs=no
continue
;;
@@ -2105,17 +3421,17 @@
func_quote_for_eval "$libobj"
test "X$libobj" != "X$func_quote_for_eval_result" \
&& $ECHO "X$libobj" | $GREP '[]~#^*{};<>?"'"'"' &()|`$[]' \
- && func_warning "libobj name \`$libobj' may not contain shell special characters."
+ && func_warning "libobj name '$libobj' may not contain shell special characters."
func_dirname_and_basename "$obj" "/" ""
- objname="$func_basename_result"
- xdir="$func_dirname_result"
- lobj=${xdir}$objdir/$objname
+ objname=$func_basename_result
+ xdir=$func_dirname_result
+ lobj=$xdir$objdir/$objname
test -z "$base_compile" && \
func_fatal_help "you must specify a compilation command"
# Delete any leftover library objects.
- if test "$build_old_libs" = yes; then
+ if test yes = "$build_old_libs"; then
removelist="$obj $lobj $libobj ${libobj}T"
else
removelist="$lobj $libobj ${libobj}T"
@@ -2127,16 +3443,16 @@
pic_mode=default
;;
esac
- if test "$pic_mode" = no && test "$deplibs_check_method" != pass_all; then
+ if test no = "$pic_mode" && test pass_all != "$deplibs_check_method"; then
# non-PIC code in shared libraries is not supported
pic_mode=default
fi
# Calculate the filename of the output object if compiler does
# not support -o with -c
- if test "$compiler_c_o" = no; then
- output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
- lockfile="$output_obj.lock"
+ if test no = "$compiler_c_o"; then
+ output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.$objext
+ lockfile=$output_obj.lock
else
output_obj=
need_locks=no
@@ -2145,12 +3461,12 @@
# Lock this critical section if it is needed
# We use this script file to make the link, it avoids creating a new file
- if test "$need_locks" = yes; then
+ if test yes = "$need_locks"; then
until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
func_echo "Waiting for $lockfile to be removed"
sleep 2
done
- elif test "$need_locks" = warn; then
+ elif test warn = "$need_locks"; then
if test -f "$lockfile"; then
$ECHO "\
*** ERROR, $lockfile exists and contains:
@@ -2158,7 +3474,7 @@
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
+your compiler does not support '-c' and '-o' together. If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
@@ -2180,11 +3496,11 @@
qsrcfile=$func_quote_for_eval_result
# Only build a PIC object if we are building libtool libraries.
- if test "$build_libtool_libs" = yes; then
+ if test yes = "$build_libtool_libs"; then
# Without this assignment, base_compile gets emptied.
fbsd_hideous_sh_bug=$base_compile
- if test "$pic_mode" != no; then
+ if test no != "$pic_mode"; then
command="$base_compile $qsrcfile $pic_flag"
else
# Don't build PIC code
@@ -2201,7 +3517,7 @@
func_show_eval_locale "$command" \
'test -n "$output_obj" && $RM $removelist; exit $EXIT_FAILURE'
- if test "$need_locks" = warn &&
+ if test warn = "$need_locks" &&
test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
$ECHO "\
*** ERROR, $lockfile contains:
@@ -2212,7 +3528,7 @@
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
+your compiler does not support '-c' and '-o' together. If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
@@ -2228,20 +3544,20 @@
fi
# Allow error messages only from the first compilation.
- if test "$suppress_opt" = yes; then
+ if test yes = "$suppress_opt"; then
suppress_output=' >/dev/null 2>&1'
fi
fi
# Only build a position-dependent object if we build old libraries.
- if test "$build_old_libs" = yes; then
- if test "$pic_mode" != yes; then
+ if test yes = "$build_old_libs"; then
+ if test yes != "$pic_mode"; then
# Don't build PIC code
command="$base_compile $qsrcfile$pie_flag"
else
command="$base_compile $qsrcfile $pic_flag"
fi
- if test "$compiler_c_o" = yes; then
+ if test yes = "$compiler_c_o"; then
func_append command " -o $obj"
fi
@@ -2250,7 +3566,7 @@
func_show_eval_locale "$command" \
'$opt_dry_run || $RM $removelist; exit $EXIT_FAILURE'
- if test "$need_locks" = warn &&
+ if test warn = "$need_locks" &&
test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then
$ECHO "\
*** ERROR, $lockfile contains:
@@ -2261,7 +3577,7 @@
This indicates that another process is trying to use the same
temporary object file, and libtool could not work around it because
-your compiler does not support \`-c' and \`-o' together. If you
+your compiler does not support '-c' and '-o' together. If you
repeat this compilation, it may succeed, by chance, but you had better
avoid parallel builds (make -j) in this platform, or get a better
compiler."
@@ -2281,7 +3597,7 @@
func_write_libtool_object "$libobj" "$objdir/$objname" "$objname"
# Unlock the critical section if it was locked
- if test "$need_locks" != no; then
+ if test no != "$need_locks"; then
removelist=$lockfile
$RM "$lockfile"
fi
@@ -2291,7 +3607,7 @@
}
$opt_help || {
- test "$opt_mode" = compile && func_mode_compile ${1+"$@"}
+ test compile = "$opt_mode" && func_mode_compile ${1+"$@"}
}
func_mode_help ()
@@ -2311,7 +3627,7 @@
Remove files from the build directory.
RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed
to RM.
If FILE is a libtool library, object or program, all the files associated
@@ -2330,16 +3646,16 @@
-no-suppress do not suppress compiler output for multiple passes
-prefer-pic try to build PIC objects only
-prefer-non-pic try to build non-PIC objects only
- -shared do not build a \`.o' file suitable for static linking
- -static only build a \`.o' file suitable for static linking
+ -shared do not build a '.o' file suitable for static linking
+ -static only build a '.o' file suitable for static linking
-Wc,FLAG pass FLAG directly to the compiler
-COMPILE-COMMAND is a command to be used in creating a \`standard' object file
+COMPILE-COMMAND is a command to be used in creating a 'standard' object file
from the given SOURCEFILE.
The output file name is determined by removing the directory component from
-SOURCEFILE, then substituting the C source code suffix \`.c' with the
-library object suffix, \`.lo'."
+SOURCEFILE, then substituting the C source code suffix '.c' with the
+library object suffix, '.lo'."
;;
execute)
@@ -2352,7 +3668,7 @@
-dlopen FILE add the directory containing FILE to the library path
-This mode sets the library path environment variable according to \`-dlopen'
+This mode sets the library path environment variable according to '-dlopen'
flags.
If any of the ARGS are libtool executable wrappers, then they are translated
@@ -2371,7 +3687,7 @@
Each LIBDIR is a directory that contains libtool libraries.
The commands that this mode executes may require superuser privileges. Use
-the \`--dry-run' option if you just want to see what would be executed."
+the '--dry-run' option if you just want to see what would be executed."
;;
install)
@@ -2381,7 +3697,7 @@
Install executables or libraries.
INSTALL-COMMAND is the installation command. The first component should be
-either the \`install' or \`cp' program.
+either the 'install' or 'cp' program.
The following components of INSTALL-COMMAND are treated specially:
@@ -2407,7 +3723,7 @@
-avoid-version do not add a version suffix if possible
-bindir BINDIR specify path to binaries directory (for systems where
libraries must be found in the PATH setting at runtime)
- -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime
+ -dlopen FILE '-dlpreopen' FILE if it cannot be dlopened at runtime
-dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols
-export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
-export-symbols SYMFILE
@@ -2421,7 +3737,8 @@
-no-install link a not-installable executable
-no-undefined declare that a library does not refer to external symbols
-o OUTPUT-FILE create OUTPUT-FILE from the specified objects
- -objectlist FILE Use a list of object files found in FILE to specify objects
+ -objectlist FILE use a list of object files found in FILE to specify objects
+ -os2dllname NAME force a short DLL name on OS/2 (no effect on other OSes)
-precious-files-regex REGEX
don't remove output files matching REGEX
-release RELEASE specify package release information
@@ -2441,20 +3758,20 @@
-Xlinker FLAG pass linker-specific FLAG directly to the linker
-XCClinker FLAG pass link-specific FLAG to the compiler driver (CC)
-All other options (arguments beginning with \`-') are ignored.
+All other options (arguments beginning with '-') are ignored.
-Every other argument is treated as a filename. Files ending in \`.la' are
+Every other argument is treated as a filename. Files ending in '.la' are
treated as uninstalled libtool libraries, other files are standard or library
object files.
-If the OUTPUT-FILE ends in \`.la', then a libtool library is created,
-only library objects (\`.lo' files) may be specified, and \`-rpath' is
+If the OUTPUT-FILE ends in '.la', then a libtool library is created,
+only library objects ('.lo' files) may be specified, and '-rpath' is
required, except when creating a convenience library.
-If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created
-using \`ar' and \`ranlib', or on Windows using \`lib'.
+If OUTPUT-FILE ends in '.a' or '.lib', then a standard library is created
+using 'ar' and 'ranlib', or on Windows using 'lib'.
-If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file
+If OUTPUT-FILE ends in '.lo' or '.$objext', then a reloadable object file
is created, otherwise an executable program is created."
;;
@@ -2465,7 +3782,7 @@
Remove libraries from an installation directory.
RM is the name of the program to use to delete files associated with each FILE
-(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed
+(typically '/bin/rm'). RM-OPTIONS are options (such as '-f') to be passed
to RM.
If FILE is a libtool library, all the files associated with it are deleted.
@@ -2473,17 +3790,17 @@
;;
*)
- func_fatal_help "invalid operation mode \`$opt_mode'"
+ func_fatal_help "invalid operation mode '$opt_mode'"
;;
esac
echo
- $ECHO "Try \`$progname --help' for more information about other modes."
+ $ECHO "Try '$progname --help' for more information about other modes."
}
# Now that we've collected a possible --mode arg, show help if necessary
if $opt_help; then
- if test "$opt_help" = :; then
+ if test : = "$opt_help"; then
func_mode_help
else
{
@@ -2491,7 +3808,7 @@
for opt_mode in compile link execute install finish uninstall clean; do
func_mode_help
done
- } | sed -n '1p; 2,$s/^Usage:/ or: /p'
+ } | $SED -n '1p; 2,$s/^Usage:/ or: /p'
{
func_help noexit
for opt_mode in compile link execute install finish uninstall clean; do
@@ -2499,7 +3816,7 @@
func_mode_help
done
} |
- sed '1d
+ $SED '1d
/^When reporting/,/^Report/{
H
d
@@ -2516,16 +3833,17 @@
# func_mode_execute arg...
func_mode_execute ()
{
- $opt_debug
+ $debug_cmd
+
# The first argument is the command name.
- cmd="$nonopt"
+ cmd=$nonopt
test -z "$cmd" && \
func_fatal_help "you must specify a COMMAND"
# Handle -dlopen flags immediately.
for file in $opt_dlopen; do
test -f "$file" \
- || func_fatal_help "\`$file' is not a file"
+ || func_fatal_help "'$file' is not a file"
dir=
case $file in
@@ -2535,7 +3853,7 @@
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$file" \
- || func_fatal_help "\`$lib' is not a valid libtool archive"
+ || func_fatal_help "'$lib' is not a valid libtool archive"
# Read the libtool library.
dlname=
@@ -2546,18 +3864,18 @@
if test -z "$dlname"; then
# Warn if it was a shared library.
test -n "$library_names" && \
- func_warning "\`$file' was not linked with \`-export-dynamic'"
+ func_warning "'$file' was not linked with '-export-dynamic'"
continue
fi
func_dirname "$file" "" "."
- dir="$func_dirname_result"
+ dir=$func_dirname_result
if test -f "$dir/$objdir/$dlname"; then
func_append dir "/$objdir"
else
if test ! -f "$dir/$dlname"; then
- func_fatal_error "cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'"
+ func_fatal_error "cannot find '$dlname' in '$dir' or '$dir/$objdir'"
fi
fi
;;
@@ -2565,18 +3883,18 @@
*.lo)
# Just add the directory containing the .lo file.
func_dirname "$file" "" "."
- dir="$func_dirname_result"
+ dir=$func_dirname_result
;;
*)
- func_warning "\`-dlopen' is ignored for non-libtool libraries and objects"
+ func_warning "'-dlopen' is ignored for non-libtool libraries and objects"
continue
;;
esac
# Get the absolute pathname.
absdir=`cd "$dir" && pwd`
- test -n "$absdir" && dir="$absdir"
+ test -n "$absdir" && dir=$absdir
# Now add the directory to shlibpath_var.
if eval "test -z \"\$$shlibpath_var\""; then
@@ -2588,7 +3906,7 @@
# This variable tells wrapper scripts just to set shlibpath_var
# rather than running their programs.
- libtool_execute_magic="$magic"
+ libtool_execute_magic=$magic
# Check if any of the arguments is a wrapper script.
args=
@@ -2601,12 +3919,12 @@
if func_ltwrapper_script_p "$file"; then
func_source "$file"
# Transform arg to wrapped name.
- file="$progdir/$program"
+ file=$progdir/$program
elif func_ltwrapper_executable_p "$file"; then
func_ltwrapper_scriptname "$file"
func_source "$func_ltwrapper_scriptname_result"
# Transform arg to wrapped name.
- file="$progdir/$program"
+ file=$progdir/$program
fi
;;
esac
@@ -2614,7 +3932,15 @@
func_append_quoted args "$file"
done
- if test "X$opt_dry_run" = Xfalse; then
+ if $opt_dry_run; then
+ # Display what would be done.
+ if test -n "$shlibpath_var"; then
+ eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
+ echo "export $shlibpath_var"
+ fi
+ $ECHO "$cmd$args"
+ exit $EXIT_SUCCESS
+ else
if test -n "$shlibpath_var"; then
# Export the shlibpath_var.
eval "export $shlibpath_var"
@@ -2631,25 +3957,18 @@
done
# Now prepare to actually exec the command.
- exec_cmd="\$cmd$args"
- else
- # Display what would be done.
- if test -n "$shlibpath_var"; then
- eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
- echo "export $shlibpath_var"
- fi
- $ECHO "$cmd$args"
- exit $EXIT_SUCCESS
+ exec_cmd=\$cmd$args
fi
}
-test "$opt_mode" = execute && func_mode_execute ${1+"$@"}
+test execute = "$opt_mode" && func_mode_execute ${1+"$@"}
# func_mode_finish arg...
func_mode_finish ()
{
- $opt_debug
+ $debug_cmd
+
libs=
libdirs=
admincmds=
@@ -2663,11 +3982,11 @@
if func_lalib_unsafe_p "$opt"; then
func_append libs " $opt"
else
- func_warning "\`$opt' is not a valid libtool archive"
+ func_warning "'$opt' is not a valid libtool archive"
fi
else
- func_fatal_error "invalid argument \`$opt'"
+ func_fatal_error "invalid argument '$opt'"
fi
done
@@ -2682,12 +4001,12 @@
# Remove sysroot references
if $opt_dry_run; then
for lib in $libs; do
- echo "removing references to $lt_sysroot and \`=' prefixes from $lib"
+ echo "removing references to $lt_sysroot and '=' prefixes from $lib"
done
else
tmpdir=`func_mktempdir`
for lib in $libs; do
- sed -e "${sysroot_cmd} s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
+ $SED -e "$sysroot_cmd s/\([ ']-[LR]\)=/\1/g; s/\([ ']\)=/\1/g" $lib \
> $tmpdir/tmp-la
mv -f $tmpdir/tmp-la $lib
done
@@ -2712,7 +4031,7 @@
fi
# Exit here if they wanted silent mode.
- $opt_silent && exit $EXIT_SUCCESS
+ $opt_quiet && exit $EXIT_SUCCESS
if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then
echo "----------------------------------------------------------------------"
@@ -2723,27 +4042,27 @@
echo
echo "If you ever happen to want to link against installed libraries"
echo "in a given directory, LIBDIR, you must either use libtool, and"
- echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+ echo "specify the full pathname of the library, or use the '-LLIBDIR'"
echo "flag during linking and do at least one of the following:"
if test -n "$shlibpath_var"; then
- echo " - add LIBDIR to the \`$shlibpath_var' environment variable"
+ echo " - add LIBDIR to the '$shlibpath_var' environment variable"
echo " during execution"
fi
if test -n "$runpath_var"; then
- echo " - add LIBDIR to the \`$runpath_var' environment variable"
+ echo " - add LIBDIR to the '$runpath_var' environment variable"
echo " during linking"
fi
if test -n "$hardcode_libdir_flag_spec"; then
libdir=LIBDIR
eval flag=\"$hardcode_libdir_flag_spec\"
- $ECHO " - use the \`$flag' linker flag"
+ $ECHO " - use the '$flag' linker flag"
fi
if test -n "$admincmds"; then
$ECHO " - have your system administrator run these commands:$admincmds"
fi
if test -f /etc/ld.so.conf; then
- echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+ echo " - have your system administrator add LIBDIR to '/etc/ld.so.conf'"
fi
echo
@@ -2762,18 +4081,20 @@
exit $EXIT_SUCCESS
}
-test "$opt_mode" = finish && func_mode_finish ${1+"$@"}
+test finish = "$opt_mode" && func_mode_finish ${1+"$@"}
# func_mode_install arg...
func_mode_install ()
{
- $opt_debug
+ $debug_cmd
+
# There may be an optional sh(1) argument at the beginning of
# install_prog (especially on Windows NT).
- if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
+ if test "$SHELL" = "$nonopt" || test /bin/sh = "$nonopt" ||
# Allow the use of GNU shtool's install command.
- case $nonopt in *shtool*) :;; *) false;; esac; then
+ case $nonopt in *shtool*) :;; *) false;; esac
+ then
# Aesthetically quote it.
func_quote_for_eval "$nonopt"
install_prog="$func_quote_for_eval_result "
@@ -2800,7 +4121,7 @@
opts=
prev=
install_type=
- isdir=no
+ isdir=false
stripme=
no_mode=:
for arg
@@ -2813,7 +4134,7 @@
fi
case $arg in
- -d) isdir=yes ;;
+ -d) isdir=: ;;
-f)
if $install_cp; then :; else
prev=$arg
@@ -2831,7 +4152,7 @@
*)
# If the previous option needed an argument, then skip it.
if test -n "$prev"; then
- if test "x$prev" = x-m && test -n "$install_override_mode"; then
+ if test X-m = "X$prev" && test -n "$install_override_mode"; then
arg2=$install_override_mode
no_mode=false
fi
@@ -2856,7 +4177,7 @@
func_fatal_help "you must specify an install program"
test -n "$prev" && \
- func_fatal_help "the \`$prev' option requires an argument"
+ func_fatal_help "the '$prev' option requires an argument"
if test -n "$install_override_mode" && $no_mode; then
if $install_cp; then :; else
@@ -2878,19 +4199,19 @@
dest=$func_stripname_result
# Check to see that the destination is a directory.
- test -d "$dest" && isdir=yes
- if test "$isdir" = yes; then
- destdir="$dest"
+ test -d "$dest" && isdir=:
+ if $isdir; then
+ destdir=$dest
destname=
else
func_dirname_and_basename "$dest" "" "."
- destdir="$func_dirname_result"
- destname="$func_basename_result"
+ destdir=$func_dirname_result
+ destname=$func_basename_result
# Not a directory, so check to see that there is only one file specified.
set dummy $files; shift
test "$#" -gt 1 && \
- func_fatal_help "\`$dest' is not a directory"
+ func_fatal_help "'$dest' is not a directory"
fi
case $destdir in
[\\/]* | [A-Za-z]:[\\/]*) ;;
@@ -2899,7 +4220,7 @@
case $file in
*.lo) ;;
*)
- func_fatal_help "\`$destdir' must be an absolute directory name"
+ func_fatal_help "'$destdir' must be an absolute directory name"
;;
esac
done
@@ -2908,7 +4229,7 @@
# This variable tells wrapper scripts just to set variables rather
# than running their programs.
- libtool_install_magic="$magic"
+ libtool_install_magic=$magic
staticlibs=
future_libdirs=
@@ -2928,7 +4249,7 @@
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$file" \
- || func_fatal_help "\`$file' is not a valid libtool archive"
+ || func_fatal_help "'$file' is not a valid libtool archive"
library_names=
old_library=
@@ -2950,7 +4271,7 @@
fi
func_dirname "$file" "/" ""
- dir="$func_dirname_result"
+ dir=$func_dirname_result
func_append dir "$objdir"
if test -n "$relink_command"; then
@@ -2964,7 +4285,7 @@
# are installed into $libdir/../bin (currently, that works fine)
# but it's something to keep an eye on.
test "$inst_prefix_dir" = "$destdir" && \
- func_fatal_error "error: cannot install \`$file' to a directory not ending in $libdir"
+ func_fatal_error "error: cannot install '$file' to a directory not ending in $libdir"
if test -n "$inst_prefix_dir"; then
# Stick the inst_prefix_dir data into the link command.
@@ -2973,29 +4294,36 @@
relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
fi
- func_warning "relinking \`$file'"
+ func_warning "relinking '$file'"
func_show_eval "$relink_command" \
- 'func_fatal_error "error: relink \`$file'\'' with the above command before installing it"'
+ 'func_fatal_error "error: relink '\''$file'\'' with the above command before installing it"'
fi
# See the names of the shared library.
set dummy $library_names; shift
if test -n "$1"; then
- realname="$1"
+ realname=$1
shift
- srcname="$realname"
- test -n "$relink_command" && srcname="$realname"T
+ srcname=$realname
+ test -n "$relink_command" && srcname=${realname}T
# Install the shared library and build the symlinks.
func_show_eval "$install_shared_prog $dir/$srcname $destdir/$realname" \
'exit $?'
- tstripme="$stripme"
+ tstripme=$stripme
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
case $realname in
*.dll.a)
- tstripme=""
+ tstripme=
+ ;;
+ esac
+ ;;
+ os2*)
+ case $realname in
+ *_dll.a)
+ tstripme=
;;
esac
;;
@@ -3006,7 +4334,7 @@
if test "$#" -gt 0; then
# Delete the old symlinks, and create new ones.
- # Try `ln -sf' first, because the `ln' binary might depend on
+ # Try 'ln -sf' first, because the 'ln' binary might depend on
# the symlink we replace! Solaris /bin/ln does not understand -f,
# so we also need to try rm && ln -s.
for linkname
@@ -3017,14 +4345,14 @@
fi
# Do each command in the postinstall commands.
- lib="$destdir/$realname"
+ lib=$destdir/$realname
func_execute_cmds "$postinstall_cmds" 'exit $?'
fi
# Install the pseudo-library for information purposes.
func_basename "$file"
- name="$func_basename_result"
- instname="$dir/$name"i
+ name=$func_basename_result
+ instname=$dir/${name}i
func_show_eval "$install_prog $instname $destdir/$name" 'exit $?'
# Maybe install the static library, too.
@@ -3036,11 +4364,11 @@
# Figure out destination file name, if it wasn't already specified.
if test -n "$destname"; then
- destfile="$destdir/$destname"
+ destfile=$destdir/$destname
else
func_basename "$file"
- destfile="$func_basename_result"
- destfile="$destdir/$destfile"
+ destfile=$func_basename_result
+ destfile=$destdir/$destfile
fi
# Deduce the name of the destination old-style object file.
@@ -3050,11 +4378,11 @@
staticdest=$func_lo2o_result
;;
*.$objext)
- staticdest="$destfile"
+ staticdest=$destfile
destfile=
;;
*)
- func_fatal_help "cannot copy a libtool object to \`$destfile'"
+ func_fatal_help "cannot copy a libtool object to '$destfile'"
;;
esac
@@ -3063,7 +4391,7 @@
func_show_eval "$install_prog $file $destfile" 'exit $?'
# Install the old object if enabled.
- if test "$build_old_libs" = yes; then
+ if test yes = "$build_old_libs"; then
# Deduce the name of the old-style object file.
func_lo2o "$file"
staticobj=$func_lo2o_result
@@ -3075,23 +4403,23 @@
*)
# Figure out destination file name, if it wasn't already specified.
if test -n "$destname"; then
- destfile="$destdir/$destname"
+ destfile=$destdir/$destname
else
func_basename "$file"
- destfile="$func_basename_result"
- destfile="$destdir/$destfile"
+ destfile=$func_basename_result
+ destfile=$destdir/$destfile
fi
# If the file is missing, and there is a .exe on the end, strip it
# because it is most likely a libtool script we actually want to
# install
- stripped_ext=""
+ stripped_ext=
case $file in
*.exe)
if test ! -f "$file"; then
func_stripname '' '.exe' "$file"
file=$func_stripname_result
- stripped_ext=".exe"
+ stripped_ext=.exe
fi
;;
esac
@@ -3119,19 +4447,19 @@
# Check the variables that should have been set.
test -z "$generated_by_libtool_version" && \
- func_fatal_error "invalid libtool wrapper script \`$wrapper'"
+ func_fatal_error "invalid libtool wrapper script '$wrapper'"
- finalize=yes
+ finalize=:
for lib in $notinst_deplibs; do
# Check to see that each library is installed.
libdir=
if test -f "$lib"; then
func_source "$lib"
fi
- libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
+ libfile=$libdir/`$ECHO "$lib" | $SED 's%^.*/%%g'`
if test -n "$libdir" && test ! -f "$libfile"; then
- func_warning "\`$lib' has not been installed in \`$libdir'"
- finalize=no
+ func_warning "'$lib' has not been installed in '$libdir'"
+ finalize=false
fi
done
@@ -3139,29 +4467,29 @@
func_source "$wrapper"
outputname=
- if test "$fast_install" = no && test -n "$relink_command"; then
+ if test no = "$fast_install" && test -n "$relink_command"; then
$opt_dry_run || {
- if test "$finalize" = yes; then
+ if $finalize; then
tmpdir=`func_mktempdir`
func_basename "$file$stripped_ext"
- file="$func_basename_result"
- outputname="$tmpdir/$file"
+ file=$func_basename_result
+ outputname=$tmpdir/$file
# Replace the output file specification.
relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
- $opt_silent || {
+ $opt_quiet || {
func_quote_for_expand "$relink_command"
eval "func_echo $func_quote_for_expand_result"
}
if eval "$relink_command"; then :
else
- func_error "error: relink \`$file' with the above command before installing it"
+ func_error "error: relink '$file' with the above command before installing it"
$opt_dry_run || ${RM}r "$tmpdir"
continue
fi
- file="$outputname"
+ file=$outputname
else
- func_warning "cannot relink \`$file'"
+ func_warning "cannot relink '$file'"
fi
}
else
@@ -3198,10 +4526,10 @@
for file in $staticlibs; do
func_basename "$file"
- name="$func_basename_result"
+ name=$func_basename_result
# Set up the ranlib parameters.
- oldlib="$destdir/$name"
+ oldlib=$destdir/$name
func_to_tool_file "$oldlib" func_convert_file_msys_to_w32
tool_oldlib=$func_to_tool_file_result
@@ -3216,18 +4544,18 @@
done
test -n "$future_libdirs" && \
- func_warning "remember to run \`$progname --finish$future_libdirs'"
+ func_warning "remember to run '$progname --finish$future_libdirs'"
if test -n "$current_libdirs"; then
# Maybe just do a dry run.
$opt_dry_run && current_libdirs=" -n$current_libdirs"
- exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs'
+ exec_cmd='$SHELL "$progpath" $preserve_args --finish$current_libdirs'
else
exit $EXIT_SUCCESS
fi
}
-test "$opt_mode" = install && func_mode_install ${1+"$@"}
+test install = "$opt_mode" && func_mode_install ${1+"$@"}
# func_generate_dlsyms outputname originator pic_p
@@ -3235,16 +4563,17 @@
# a dlpreopen symbol table.
func_generate_dlsyms ()
{
- $opt_debug
- my_outputname="$1"
- my_originator="$2"
- my_pic_p="${3-no}"
- my_prefix=`$ECHO "$my_originator" | sed 's%[^a-zA-Z0-9]%_%g'`
+ $debug_cmd
+
+ my_outputname=$1
+ my_originator=$2
+ my_pic_p=${3-false}
+ my_prefix=`$ECHO "$my_originator" | $SED 's%[^a-zA-Z0-9]%_%g'`
my_dlsyms=
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
+ if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
if test -n "$NM" && test -n "$global_symbol_pipe"; then
- my_dlsyms="${my_outputname}S.c"
+ my_dlsyms=${my_outputname}S.c
else
func_error "not configured to extract global symbols from dlpreopened files"
fi
@@ -3255,7 +4584,7 @@
"") ;;
*.c)
# Discover the nlist of each of the dlfiles.
- nlist="$output_objdir/${my_outputname}.nm"
+ nlist=$output_objdir/$my_outputname.nm
func_show_eval "$RM $nlist ${nlist}S ${nlist}T"
@@ -3263,34 +4592,36 @@
func_verbose "creating $output_objdir/$my_dlsyms"
$opt_dry_run || $ECHO > "$output_objdir/$my_dlsyms" "\
-/* $my_dlsyms - symbol resolution table for \`$my_outputname' dlsym emulation. */
-/* Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION */
+/* $my_dlsyms - symbol resolution table for '$my_outputname' dlsym emulation. */
+/* Generated by $PROGRAM (GNU $PACKAGE) $VERSION */
#ifdef __cplusplus
extern \"C\" {
#endif
-#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#if defined __GNUC__ && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
#endif
/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
relocations are performed -- see ld's documentation on pseudo-relocs. */
# define LT_DLSYM_CONST
-#elif defined(__osf__)
+#elif defined __osf__
/* This system does not cope well with relocations in const data. */
# define LT_DLSYM_CONST
#else
# define LT_DLSYM_CONST const
#endif
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
/* External symbol declarations for the compiler. */\
"
- if test "$dlself" = yes; then
- func_verbose "generating symbol list for \`$output'"
+ if test yes = "$dlself"; then
+ func_verbose "generating symbol list for '$output'"
$opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
@@ -3298,7 +4629,7 @@
progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
for progfile in $progfiles; do
func_to_tool_file "$progfile" func_convert_file_msys_to_w32
- func_verbose "extracting global C symbols from \`$func_to_tool_file_result'"
+ func_verbose "extracting global C symbols from '$func_to_tool_file_result'"
$opt_dry_run || eval "$NM $func_to_tool_file_result | $global_symbol_pipe >> '$nlist'"
done
@@ -3318,10 +4649,10 @@
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
- export_symbols="$output_objdir/$outputname.exp"
+ export_symbols=$output_objdir/$outputname.exp
$opt_dry_run || {
$RM $export_symbols
- eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
+ eval "$SED -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"'
case $host in
*cygwin* | *mingw* | *cegcc* )
eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
@@ -3331,7 +4662,7 @@
}
else
$opt_dry_run || {
- eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
+ eval "$SED -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"'
eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
eval '$MV "$nlist"T "$nlist"'
case $host in
@@ -3345,22 +4676,22 @@
fi
for dlprefile in $dlprefiles; do
- func_verbose "extracting global C symbols from \`$dlprefile'"
+ func_verbose "extracting global C symbols from '$dlprefile'"
func_basename "$dlprefile"
- name="$func_basename_result"
+ name=$func_basename_result
case $host in
*cygwin* | *mingw* | *cegcc* )
# if an import library, we need to obtain dlname
if func_win32_import_lib_p "$dlprefile"; then
func_tr_sh "$dlprefile"
eval "curr_lafile=\$libfile_$func_tr_sh_result"
- dlprefile_dlbasename=""
+ dlprefile_dlbasename=
if test -n "$curr_lafile" && func_lalib_p "$curr_lafile"; then
# Use subshell, to avoid clobbering current variable values
dlprefile_dlname=`source "$curr_lafile" && echo "$dlname"`
- if test -n "$dlprefile_dlname" ; then
+ if test -n "$dlprefile_dlname"; then
func_basename "$dlprefile_dlname"
- dlprefile_dlbasename="$func_basename_result"
+ dlprefile_dlbasename=$func_basename_result
else
# no lafile. user explicitly requested -dlpreopen <import library>.
$sharedlib_from_linklib_cmd "$dlprefile"
@@ -3368,7 +4699,7 @@
fi
fi
$opt_dry_run || {
- if test -n "$dlprefile_dlbasename" ; then
+ if test -n "$dlprefile_dlbasename"; then
eval '$ECHO ": $dlprefile_dlbasename" >> "$nlist"'
else
func_warning "Could not compute DLL name from $name"
@@ -3424,6 +4755,11 @@
echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
fi
+ func_show_eval '$RM "${nlist}I"'
+ if test -n "$global_symbol_to_import"; then
+ eval "$global_symbol_to_import"' < "$nlist"S > "$nlist"I'
+ fi
+
echo >> "$output_objdir/$my_dlsyms" "\
/* The mapping between symbol names and symbols. */
@@ -3432,11 +4768,30 @@
void *address;
} lt_dlsymlist;
extern LT_DLSYM_CONST lt_dlsymlist
-lt_${my_prefix}_LTX_preloaded_symbols[];
+lt_${my_prefix}_LTX_preloaded_symbols[];\
+"
+
+ if test -s "$nlist"I; then
+ echo >> "$output_objdir/$my_dlsyms" "\
+static void lt_syminit(void)
+{
+ LT_DLSYM_CONST lt_dlsymlist *symbol = lt_${my_prefix}_LTX_preloaded_symbols;
+ for (; symbol->name; ++symbol)
+ {"
+ $SED 's/.*/ if (STREQ (symbol->name, \"&\")) symbol->address = (void *) \&&;/' < "$nlist"I >> "$output_objdir/$my_dlsyms"
+ echo >> "$output_objdir/$my_dlsyms" "\
+ }
+}"
+ fi
+ echo >> "$output_objdir/$my_dlsyms" "\
LT_DLSYM_CONST lt_dlsymlist
lt_${my_prefix}_LTX_preloaded_symbols[] =
-{\
- { \"$my_originator\", (void *) 0 },"
+{ {\"$my_originator\", (void *) 0},"
+
+ if test -s "$nlist"I; then
+ echo >> "$output_objdir/$my_dlsyms" "\
+ {\"@INIT@\", (void *) <_syminit},"
+ fi
case $need_lib_prefix in
no)
@@ -3478,9 +4833,7 @@
*-*-hpux*)
pic_flag_for_symtable=" $pic_flag" ;;
*)
- if test "X$my_pic_p" != Xno; then
- pic_flag_for_symtable=" $pic_flag"
- fi
+ $my_pic_p && pic_flag_for_symtable=" $pic_flag"
;;
esac
;;
@@ -3497,10 +4850,10 @@
func_show_eval '(cd $output_objdir && $LTCC$symtab_cflags -c$no_builtin_flag$pic_flag_for_symtable "$my_dlsyms")' 'exit $?'
# Clean up the generated files.
- func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T"'
+ func_show_eval '$RM "$output_objdir/$my_dlsyms" "$nlist" "${nlist}S" "${nlist}T" "${nlist}I"'
# Transform the symbol file into the correct name.
- symfileobj="$output_objdir/${my_outputname}S.$objext"
+ symfileobj=$output_objdir/${my_outputname}S.$objext
case $host in
*cygwin* | *mingw* | *cegcc* )
if test -f "$output_objdir/$my_outputname.def"; then
@@ -3518,7 +4871,7 @@
esac
;;
*)
- func_fatal_error "unknown suffix for \`$my_dlsyms'"
+ func_fatal_error "unknown suffix for '$my_dlsyms'"
;;
esac
else
@@ -3532,6 +4885,32 @@
fi
}
+# func_cygming_gnu_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is a GNU/binutils-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_gnu_implib_p ()
+{
+ $debug_cmd
+
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
+ test -n "$func_cygming_gnu_implib_tmp"
+}
+
+# func_cygming_ms_implib_p ARG
+# This predicate returns with zero status (TRUE) if
+# ARG is an MS-style import library. Returns
+# with nonzero status (FALSE) otherwise.
+func_cygming_ms_implib_p ()
+{
+ $debug_cmd
+
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
+ test -n "$func_cygming_ms_implib_tmp"
+}
+
# func_win32_libid arg
# return the library type of file 'arg'
#
@@ -3541,8 +4920,9 @@
# Despite the name, also deal with 64 bit binaries.
func_win32_libid ()
{
- $opt_debug
- win32_libid_type="unknown"
+ $debug_cmd
+
+ win32_libid_type=unknown
win32_fileres=`file -L $1 2>/dev/null`
case $win32_fileres in
*ar\ archive\ import\ library*) # definitely import
@@ -3552,16 +4932,29 @@
# Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
$EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
- func_to_tool_file "$1" func_convert_file_msys_to_w32
- win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
- $SED -n -e '
+ case $nm_interface in
+ "MS dumpbin")
+ if func_cygming_ms_implib_p "$1" ||
+ func_cygming_gnu_implib_p "$1"
+ then
+ win32_nmres=import
+ else
+ win32_nmres=
+ fi
+ ;;
+ *)
+ func_to_tool_file "$1" func_convert_file_msys_to_w32
+ win32_nmres=`eval $NM -f posix -A \"$func_to_tool_file_result\" |
+ $SED -n -e '
1,100{
/ I /{
- s,.*,import,
+ s|.*|import|
p
q
}
}'`
+ ;;
+ esac
case $win32_nmres in
import*) win32_libid_type="x86 archive import";;
*) win32_libid_type="x86 archive static";;
@@ -3593,7 +4986,8 @@
# $sharedlib_from_linklib_result
func_cygming_dll_for_implib ()
{
- $opt_debug
+ $debug_cmd
+
sharedlib_from_linklib_result=`$DLLTOOL --identify-strict --identify "$1"`
}
@@ -3610,7 +5004,8 @@
# specified import library.
func_cygming_dll_for_implib_fallback_core ()
{
- $opt_debug
+ $debug_cmd
+
match_literal=`$ECHO "$1" | $SED "$sed_make_literal_regex"`
$OBJDUMP -s --section "$1" "$2" 2>/dev/null |
$SED '/^Contents of section '"$match_literal"':/{
@@ -3646,8 +5041,8 @@
/./p' |
# we now have a list, one entry per line, of the stringified
# contents of the appropriate section of all members of the
- # archive which possess that section. Heuristic: eliminate
- # all those which have a first or second character that is
+ # archive that possess that section. Heuristic: eliminate
+ # all those that have a first or second character that is
# a '.' (that is, objdump's representation of an unprintable
# character.) This should work for all archives with less than
# 0x302f exports -- but will fail for DLLs whose name actually
@@ -3658,30 +5053,6 @@
$SED -e '/^\./d;/^.\./d;q'
}
-# func_cygming_gnu_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is a GNU/binutils-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_gnu_implib_p ()
-{
- $opt_debug
- func_to_tool_file "$1" func_convert_file_msys_to_w32
- func_cygming_gnu_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $EGREP ' (_head_[A-Za-z0-9_]+_[ad]l*|[A-Za-z0-9_]+_[ad]l*_iname)$'`
- test -n "$func_cygming_gnu_implib_tmp"
-}
-
-# func_cygming_ms_implib_p ARG
-# This predicate returns with zero status (TRUE) if
-# ARG is an MS-style import library. Returns
-# with nonzero status (FALSE) otherwise.
-func_cygming_ms_implib_p ()
-{
- $opt_debug
- func_to_tool_file "$1" func_convert_file_msys_to_w32
- func_cygming_ms_implib_tmp=`$NM "$func_to_tool_file_result" | eval "$global_symbol_pipe" | $GREP '_NULL_IMPORT_DESCRIPTOR'`
- test -n "$func_cygming_ms_implib_tmp"
-}
-
# func_cygming_dll_for_implib_fallback ARG
# Platform-specific function to extract the
# name of the DLL associated with the specified
@@ -3695,16 +5066,17 @@
# $sharedlib_from_linklib_result
func_cygming_dll_for_implib_fallback ()
{
- $opt_debug
- if func_cygming_gnu_implib_p "$1" ; then
+ $debug_cmd
+
+ if func_cygming_gnu_implib_p "$1"; then
# binutils import library
sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$7' "$1"`
- elif func_cygming_ms_implib_p "$1" ; then
+ elif func_cygming_ms_implib_p "$1"; then
# ms-generated import library
sharedlib_from_linklib_result=`func_cygming_dll_for_implib_fallback_core '.idata$6' "$1"`
else
# unknown
- sharedlib_from_linklib_result=""
+ sharedlib_from_linklib_result=
fi
}
@@ -3712,10 +5084,11 @@
# func_extract_an_archive dir oldlib
func_extract_an_archive ()
{
- $opt_debug
- f_ex_an_ar_dir="$1"; shift
- f_ex_an_ar_oldlib="$1"
- if test "$lock_old_archive_extraction" = yes; then
+ $debug_cmd
+
+ f_ex_an_ar_dir=$1; shift
+ f_ex_an_ar_oldlib=$1
+ if test yes = "$lock_old_archive_extraction"; then
lockfile=$f_ex_an_ar_oldlib.lock
until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
func_echo "Waiting for $lockfile to be removed"
@@ -3724,7 +5097,7 @@
fi
func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
'stat=$?; rm -f "$lockfile"; exit $stat'
- if test "$lock_old_archive_extraction" = yes; then
+ if test yes = "$lock_old_archive_extraction"; then
$opt_dry_run || rm -f "$lockfile"
fi
if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
@@ -3738,22 +5111,23 @@
# func_extract_archives gentop oldlib ...
func_extract_archives ()
{
- $opt_debug
- my_gentop="$1"; shift
+ $debug_cmd
+
+ my_gentop=$1; shift
my_oldlibs=${1+"$@"}
- my_oldobjs=""
- my_xlib=""
- my_xabs=""
- my_xdir=""
+ my_oldobjs=
+ my_xlib=
+ my_xabs=
+ my_xdir=
for my_xlib in $my_oldlibs; do
# Extract the objects.
case $my_xlib in
- [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) my_xabs=$my_xlib ;;
*) my_xabs=`pwd`"/$my_xlib" ;;
esac
func_basename "$my_xlib"
- my_xlib="$func_basename_result"
+ my_xlib=$func_basename_result
my_xlib_u=$my_xlib
while :; do
case " $extracted_archives " in
@@ -3765,7 +5139,7 @@
esac
done
extracted_archives="$extracted_archives $my_xlib_u"
- my_xdir="$my_gentop/$my_xlib_u"
+ my_xdir=$my_gentop/$my_xlib_u
func_mkdir_p "$my_xdir"
@@ -3778,22 +5152,23 @@
cd $my_xdir || exit $?
darwin_archive=$my_xabs
darwin_curdir=`pwd`
- darwin_base_archive=`basename "$darwin_archive"`
+ func_basename "$darwin_archive"
+ darwin_base_archive=$func_basename_result
darwin_arches=`$LIPO -info "$darwin_archive" 2>/dev/null | $GREP Architectures 2>/dev/null || true`
if test -n "$darwin_arches"; then
darwin_arches=`$ECHO "$darwin_arches" | $SED -e 's/.*are://'`
darwin_arch=
func_verbose "$darwin_base_archive has multiple architectures $darwin_arches"
- for darwin_arch in $darwin_arches ; do
- func_mkdir_p "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- $LIPO -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}"
- cd "unfat-$$/${darwin_base_archive}-${darwin_arch}"
- func_extract_an_archive "`pwd`" "${darwin_base_archive}"
+ for darwin_arch in $darwin_arches; do
+ func_mkdir_p "unfat-$$/$darwin_base_archive-$darwin_arch"
+ $LIPO -thin $darwin_arch -output "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive" "$darwin_archive"
+ cd "unfat-$$/$darwin_base_archive-$darwin_arch"
+ func_extract_an_archive "`pwd`" "$darwin_base_archive"
cd "$darwin_curdir"
- $RM "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}"
+ $RM "unfat-$$/$darwin_base_archive-$darwin_arch/$darwin_base_archive"
done # $darwin_arches
## Okay now we've a bunch of thin objects, gotta fatten them up :)
- darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$basename" | sort -u`
+ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print | $SED -e "$sed_basename" | sort -u`
darwin_file=
darwin_files=
for darwin_file in $darwin_filelist; do
@@ -3815,7 +5190,7 @@
my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
done
- func_extract_archives_result="$my_oldobjs"
+ func_extract_archives_result=$my_oldobjs
}
@@ -3830,7 +5205,7 @@
#
# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
# variable will take. If 'yes', then the emitted script
-# will assume that the directory in which it is stored is
+# will assume that the directory where it is stored is
# the $objdir directory. This is a cygwin/mingw-specific
# behavior.
func_emit_wrapper ()
@@ -3841,7 +5216,7 @@
#! $SHELL
# $output - temporary wrapper script for $objdir/$outputname
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
#
# The $output program cannot be directly executed until all the libtool
# libraries that it depends on are installed.
@@ -3898,9 +5273,9 @@
# Very basic option parsing. These options are (a) specific to
# the libtool wrapper, (b) are identical between the wrapper
-# /script/ and the wrapper /executable/ which is used only on
+# /script/ and the wrapper /executable/ that is used only on
# windows platforms, and (c) all begin with the string "--lt-"
-# (application programs are unlikely to have options which match
+# (application programs are unlikely to have options that match
# this pattern).
#
# There are only two supported options: --lt-debug and
@@ -3933,7 +5308,7 @@
# Print the debug banner immediately:
if test -n \"\$lt_option_debug\"; then
- echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+ echo \"$outputname:$output:\$LINENO: libtool wrapper (GNU $PACKAGE) $VERSION\" 1>&2
fi
}
@@ -3944,7 +5319,7 @@
lt_dump_args_N=1;
for lt_arg
do
- \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
+ \$ECHO \"$outputname:$output:\$LINENO: newargv[\$lt_dump_args_N]: \$lt_arg\"
lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
done
}
@@ -3958,7 +5333,7 @@
*-*-mingw | *-*-os2* | *-cegcc*)
$ECHO "\
if test -n \"\$lt_option_debug\"; then
- \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
+ \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir\\\\\$program\" 1>&2
func_lt_dump_args \${1+\"\$@\"} 1>&2
fi
exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
@@ -3968,7 +5343,7 @@
*)
$ECHO "\
if test -n \"\$lt_option_debug\"; then
- \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
+ \$ECHO \"$outputname:$output:\$LINENO: newargv[0]: \$progdir/\$program\" 1>&2
func_lt_dump_args \${1+\"\$@\"} 1>&2
fi
exec \"\$progdir/\$program\" \${1+\"\$@\"}
@@ -4043,13 +5418,13 @@
test -n \"\$absdir\" && thisdir=\"\$absdir\"
"
- if test "$fast_install" = yes; then
+ if test yes = "$fast_install"; then
$ECHO "\
program=lt-'$outputname'$exeext
progdir=\"\$thisdir/$objdir\"
if test ! -f \"\$progdir/\$program\" ||
- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\
+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | $SED 1q\`; \\
test \"X\$file\" != \"X\$progdir/\$program\"; }; then
file=\"\$\$-\$program\"
@@ -4066,7 +5441,7 @@
if test -n \"\$relink_command\"; then
if relink_command_output=\`eval \$relink_command 2>&1\`; then :
else
- $ECHO \"\$relink_command_output\" >&2
+ \$ECHO \"\$relink_command_output\" >&2
$RM \"\$progdir/\$file\"
exit 1
fi
@@ -4101,7 +5476,7 @@
fi
# Export our shlibpath_var if we have one.
- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
$ECHO "\
# Add our own library path to $shlibpath_var
$shlibpath_var=\"$temp_rpath\$$shlibpath_var\"
@@ -4121,7 +5496,7 @@
fi
else
# The program doesn't exist.
- \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
+ \$ECHO \"\$0: error: '\$progdir/\$program' does not exist\" 1>&2
\$ECHO \"This script is just a wrapper for \$program.\" 1>&2
\$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
exit 1
@@ -4140,7 +5515,7 @@
cat <<EOF
/* $cwrappersource - temporary wrapper executable for $objdir/$outputname
- Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+ Generated by $PROGRAM (GNU $PACKAGE) $VERSION
The $output program cannot be directly executed until all the libtool
libraries that it depends on are installed.
@@ -4175,47 +5550,45 @@
#include <fcntl.h>
#include <sys/stat.h>
+#define STREQ(s1, s2) (strcmp ((s1), (s2)) == 0)
+
/* declarations of non-ANSI functions */
-#if defined(__MINGW32__)
+#if defined __MINGW32__
# ifdef __STRICT_ANSI__
int _putenv (const char *);
# endif
-#elif defined(__CYGWIN__)
+#elif defined __CYGWIN__
# ifdef __STRICT_ANSI__
char *realpath (const char *, char *);
int putenv (char *);
int setenv (const char *, const char *, int);
# endif
-/* #elif defined (other platforms) ... */
+/* #elif defined other_platform || defined ... */
#endif
/* portability defines, excluding path handling macros */
-#if defined(_MSC_VER)
+#if defined _MSC_VER
# define setmode _setmode
# define stat _stat
# define chmod _chmod
# define getcwd _getcwd
# define putenv _putenv
# define S_IXUSR _S_IEXEC
-# ifndef _INTPTR_T_DEFINED
-# define _INTPTR_T_DEFINED
-# define intptr_t int
-# endif
-#elif defined(__MINGW32__)
+#elif defined __MINGW32__
# define setmode _setmode
# define stat _stat
# define chmod _chmod
# define getcwd _getcwd
# define putenv _putenv
-#elif defined(__CYGWIN__)
+#elif defined __CYGWIN__
# define HAVE_SETENV
# define FOPEN_WB "wb"
-/* #elif defined (other platforms) ... */
+/* #elif defined other platforms ... */
#endif
-#if defined(PATH_MAX)
+#if defined PATH_MAX
# define LT_PATHMAX PATH_MAX
-#elif defined(MAXPATHLEN)
+#elif defined MAXPATHLEN
# define LT_PATHMAX MAXPATHLEN
#else
# define LT_PATHMAX 1024
@@ -4234,8 +5607,8 @@
# define PATH_SEPARATOR ':'
#endif
-#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \
- defined (__OS2__)
+#if defined _WIN32 || defined __MSDOS__ || defined __DJGPP__ || \
+ defined __OS2__
# define HAVE_DOS_BASED_FILE_SYSTEM
# define FOPEN_WB "wb"
# ifndef DIR_SEPARATOR_2
@@ -4268,10 +5641,10 @@
#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type)))
#define XFREE(stale) do { \
- if (stale) { free ((void *) stale); stale = 0; } \
+ if (stale) { free (stale); stale = 0; } \
} while (0)
-#if defined(LT_DEBUGWRAPPER)
+#if defined LT_DEBUGWRAPPER
static int lt_debug = 1;
#else
static int lt_debug = 0;
@@ -4300,11 +5673,16 @@
EOF
cat <<EOF
-volatile const char * MAGIC_EXE = "$magic_exe";
+#if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
+# define externally_visible volatile
+#else
+# define externally_visible __attribute__((externally_visible)) volatile
+#endif
+externally_visible const char * MAGIC_EXE = "$magic_exe";
const char * LIB_PATH_VARNAME = "$shlibpath_var";
EOF
- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
+ if test yes = "$shlibpath_overrides_runpath" && test -n "$shlibpath_var" && test -n "$temp_rpath"; then
func_to_host_path "$temp_rpath"
cat <<EOF
const char * LIB_PATH_VALUE = "$func_to_host_path_result";
@@ -4328,7 +5706,7 @@
EOF
fi
- if test "$fast_install" = yes; then
+ if test yes = "$fast_install"; then
cat <<EOF
const char * TARGET_PROGRAM_NAME = "lt-$outputname"; /* hopefully, no .exe */
EOF
@@ -4357,12 +5735,12 @@
char *actual_cwrapper_name;
char *target_name;
char *lt_argv_zero;
- intptr_t rval = 127;
+ int rval = 127;
int i;
program_name = (char *) xstrdup (base_name (argv[0]));
- newargz = XMALLOC (char *, argc + 1);
+ newargz = XMALLOC (char *, (size_t) argc + 1);
/* very simple arg parsing; don't want to rely on getopt
* also, copy all non cwrapper options to newargz, except
@@ -4371,10 +5749,10 @@
newargc=0;
for (i = 1; i < argc; i++)
{
- if (strcmp (argv[i], dumpscript_opt) == 0)
+ if (STREQ (argv[i], dumpscript_opt))
{
EOF
- case "$host" in
+ case $host in
*mingw* | *cygwin* )
# make stdout use "unix" line endings
echo " setmode(1,_O_BINARY);"
@@ -4385,12 +5763,12 @@
lt_dump_script (stdout);
return 0;
}
- if (strcmp (argv[i], debug_opt) == 0)
+ if (STREQ (argv[i], debug_opt))
{
lt_debug = 1;
continue;
}
- if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
+ if (STREQ (argv[i], ltwrapper_option_prefix))
{
/* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
namespace, but it is not one of the ones we know about and
@@ -4413,7 +5791,7 @@
EOF
cat <<EOF
/* The GNU banner must be the first non-error debug message */
- lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
+ lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE) $VERSION\n");
EOF
cat <<"EOF"
lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
@@ -4524,7 +5902,7 @@
cat <<"EOF"
/* execv doesn't actually work on mingw as expected on unix */
newargz = prepare_spawn (newargz);
- rval = _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
+ rval = (int) _spawnv (_P_WAIT, lt_argv_zero, (const char * const *) newargz);
if (rval == -1)
{
/* failed to start process */
@@ -4569,7 +5947,7 @@
{
const char *base;
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
/* Skip over the disk name in MSDOS pathnames. */
if (isalpha ((unsigned char) name[0]) && name[1] == ':')
name += 2;
@@ -4628,7 +6006,7 @@
const char *p_next;
/* static buffer for getcwd */
char tmp[LT_PATHMAX + 1];
- int tmp_len;
+ size_t tmp_len;
char *concat_name;
lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
@@ -4638,7 +6016,7 @@
return NULL;
/* Absolute path? */
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
if (isalpha ((unsigned char) wrapper[0]) && wrapper[1] == ':')
{
concat_name = xstrdup (wrapper);
@@ -4656,7 +6034,7 @@
return concat_name;
XFREE (concat_name);
}
-#if defined (HAVE_DOS_BASED_FILE_SYSTEM)
+#if defined HAVE_DOS_BASED_FILE_SYSTEM
}
#endif
@@ -4679,7 +6057,7 @@
for (q = p; *q; q++)
if (IS_PATH_SEPARATOR (*q))
break;
- p_len = q - p;
+ p_len = (size_t) (q - p);
p_next = (*q == '\0' ? q : q + 1);
if (p_len == 0)
{
@@ -4798,7 +6176,7 @@
if (patlen <= len)
{
str += len - patlen;
- if (strcmp (str, pat) == 0)
+ if (STREQ (str, pat))
*str = '\0';
}
return str;
@@ -4863,7 +6241,7 @@
char *str = xstrdup (value);
setenv (name, str, 1);
#else
- int len = strlen (name) + 1 + strlen (value) + 1;
+ size_t len = strlen (name) + 1 + strlen (value) + 1;
char *str = XMALLOC (char, len);
sprintf (str, "%s=%s", name, value);
if (putenv (str) != EXIT_SUCCESS)
@@ -4880,8 +6258,8 @@
char *new_value;
if (orig_value && *orig_value)
{
- int orig_value_len = strlen (orig_value);
- int add_len = strlen (add);
+ size_t orig_value_len = strlen (orig_value);
+ size_t add_len = strlen (add);
new_value = XMALLOC (char, add_len + orig_value_len + 1);
if (to_end)
{
@@ -4912,10 +6290,10 @@
{
char *new_value = lt_extend_str (getenv (name), value, 0);
/* some systems can't cope with a ':'-terminated path #' */
- int len = strlen (new_value);
- while (((len = strlen (new_value)) > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
+ size_t len = strlen (new_value);
+ while ((len > 0) && IS_PATH_SEPARATOR (new_value[len-1]))
{
- new_value[len-1] = '\0';
+ new_value[--len] = '\0';
}
lt_setenv (name, new_value);
XFREE (new_value);
@@ -5082,27 +6460,47 @@
# True if ARG is an import lib, as indicated by $file_magic_cmd
func_win32_import_lib_p ()
{
- $opt_debug
+ $debug_cmd
+
case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
*import*) : ;;
*) false ;;
esac
}
+# func_suncc_cstd_abi
+# !!ONLY CALL THIS FOR SUN CC AFTER $compile_command IS FULLY EXPANDED!!
+# Several compiler flags select an ABI that is incompatible with the
+# Cstd library. Avoid specifying it if any are in CXXFLAGS.
+func_suncc_cstd_abi ()
+{
+ $debug_cmd
+
+ case " $compile_command " in
+ *" -compat=g "*|*\ -std=c++[0-9][0-9]\ *|*" -library=stdcxx4 "*|*" -library=stlport4 "*)
+ suncc_use_cstd_abi=no
+ ;;
+ *)
+ suncc_use_cstd_abi=yes
+ ;;
+ esac
+}
+
# func_mode_link arg...
func_mode_link ()
{
- $opt_debug
+ $debug_cmd
+
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
# It is impossible to link a dll without this setting, and
# we shouldn't force the makefile maintainer to figure out
- # which system we are compiling for in order to pass an extra
+ # what system we are compiling for in order to pass an extra
# flag for every libtool invocation.
# allow_undefined=no
# FIXME: Unfortunately, there are problems with the above when trying
- # to make a dll which has undefined symbols, in which case not
+ # to make a dll that has undefined symbols, in which case not
# even a static library is built. For now, we need to specify
# -no-undefined on the libtool link line when we can be certain
# that all symbols are satisfied, otherwise we get a static library.
@@ -5146,10 +6544,11 @@
module=no
no_install=no
objs=
+ os2dllname=
non_pic_objects=
precious_files_regex=
prefer_static_libs=no
- preload=no
+ preload=false
prev=
prevarg=
release=
@@ -5161,7 +6560,7 @@
vinfo=
vinfo_number=no
weak_libs=
- single_module="${wl}-single_module"
+ single_module=$wl-single_module
func_infer_tag $base_compile
# We need to know -static, to get the right output filenames.
@@ -5169,15 +6568,15 @@
do
case $arg in
-shared)
- test "$build_libtool_libs" != yes && \
- func_fatal_configuration "can not build a shared library"
+ test yes != "$build_libtool_libs" \
+ && func_fatal_configuration "cannot build a shared library"
build_old_libs=no
break
;;
-all-static | -static | -static-libtool-libs)
case $arg in
-all-static)
- if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+ if test yes = "$build_libtool_libs" && test -z "$link_static_flag"; then
func_warning "complete static linking is impossible in this configuration"
fi
if test -n "$link_static_flag"; then
@@ -5210,7 +6609,7 @@
# Go through the arguments, transforming them on the way.
while test "$#" -gt 0; do
- arg="$1"
+ arg=$1
shift
func_quote_for_eval "$arg"
qarg=$func_quote_for_eval_unquoted_result
@@ -5227,21 +6626,21 @@
case $prev in
bindir)
- bindir="$arg"
+ bindir=$arg
prev=
continue
;;
dlfiles|dlprefiles)
- if test "$preload" = no; then
+ $preload || {
# Add the symbol object into the linking commands.
func_append compile_command " @SYMFILE@"
func_append finalize_command " @SYMFILE@"
- preload=yes
- fi
+ preload=:
+ }
case $arg in
*.la | *.lo) ;; # We handle these cases below.
force)
- if test "$dlself" = no; then
+ if test no = "$dlself"; then
dlself=needless
export_dynamic=yes
fi
@@ -5249,9 +6648,9 @@
continue
;;
self)
- if test "$prev" = dlprefiles; then
+ if test dlprefiles = "$prev"; then
dlself=yes
- elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then
+ elif test dlfiles = "$prev" && test yes != "$dlopen_self"; then
dlself=yes
else
dlself=needless
@@ -5261,7 +6660,7 @@
continue
;;
*)
- if test "$prev" = dlfiles; then
+ if test dlfiles = "$prev"; then
func_append dlfiles " $arg"
else
func_append dlprefiles " $arg"
@@ -5272,14 +6671,14 @@
esac
;;
expsyms)
- export_symbols="$arg"
+ export_symbols=$arg
test -f "$arg" \
- || func_fatal_error "symbol file \`$arg' does not exist"
+ || func_fatal_error "symbol file '$arg' does not exist"
prev=
continue
;;
expsyms_regex)
- export_symbols_regex="$arg"
+ export_symbols_regex=$arg
prev=
continue
;;
@@ -5297,7 +6696,13 @@
continue
;;
inst_prefix)
- inst_prefix_dir="$arg"
+ inst_prefix_dir=$arg
+ prev=
+ continue
+ ;;
+ mllvm)
+ # Clang does not use LLVM to link, so we can simply discard any
+ # '-mllvm $arg' options when doing the link step.
prev=
continue
;;
@@ -5321,21 +6726,21 @@
if test -z "$pic_object" ||
test -z "$non_pic_object" ||
- test "$pic_object" = none &&
- test "$non_pic_object" = none; then
- func_fatal_error "cannot find name of object for \`$arg'"
+ test none = "$pic_object" &&
+ test none = "$non_pic_object"; then
+ func_fatal_error "cannot find name of object for '$arg'"
fi
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
+ xdir=$func_dirname_result
- if test "$pic_object" != none; then
+ if test none != "$pic_object"; then
# Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
+ pic_object=$xdir$pic_object
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ if test dlfiles = "$prev"; then
+ if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
func_append dlfiles " $pic_object"
prev=
continue
@@ -5346,7 +6751,7 @@
fi
# CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
+ if test dlprefiles = "$prev"; then
# Preload the old-style object.
func_append dlprefiles " $pic_object"
prev=
@@ -5354,23 +6759,23 @@
# A PIC object.
func_append libobjs " $pic_object"
- arg="$pic_object"
+ arg=$pic_object
fi
# Non-PIC object.
- if test "$non_pic_object" != none; then
+ if test none != "$non_pic_object"; then
# Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
+ non_pic_object=$xdir$non_pic_object
# A standard non-PIC object
func_append non_pic_objects " $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
+ if test -z "$pic_object" || test none = "$pic_object"; then
+ arg=$non_pic_object
fi
else
# If the PIC object exists, use it instead.
# $xdir was prepended to $pic_object above.
- non_pic_object="$pic_object"
+ non_pic_object=$pic_object
func_append non_pic_objects " $non_pic_object"
fi
else
@@ -5378,7 +6783,7 @@
if $opt_dry_run; then
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
+ xdir=$func_dirname_result
func_lo2o "$arg"
pic_object=$xdir$objdir/$func_lo2o_result
@@ -5386,24 +6791,29 @@
func_append libobjs " $pic_object"
func_append non_pic_objects " $non_pic_object"
else
- func_fatal_error "\`$arg' is not a valid libtool object"
+ func_fatal_error "'$arg' is not a valid libtool object"
fi
fi
done
else
- func_fatal_error "link input file \`$arg' does not exist"
+ func_fatal_error "link input file '$arg' does not exist"
fi
arg=$save_arg
prev=
continue
;;
+ os2dllname)
+ os2dllname=$arg
+ prev=
+ continue
+ ;;
precious_regex)
- precious_files_regex="$arg"
+ precious_files_regex=$arg
prev=
continue
;;
release)
- release="-$arg"
+ release=-$arg
prev=
continue
;;
@@ -5415,7 +6825,7 @@
func_fatal_error "only absolute run-paths are allowed"
;;
esac
- if test "$prev" = rpath; then
+ if test rpath = "$prev"; then
case "$rpath " in
*" $arg "*) ;;
*) func_append rpath " $arg" ;;
@@ -5430,7 +6840,7 @@
continue
;;
shrext)
- shrext_cmds="$arg"
+ shrext_cmds=$arg
prev=
continue
;;
@@ -5470,7 +6880,7 @@
esac
fi # test -n "$prev"
- prevarg="$arg"
+ prevarg=$arg
case $arg in
-all-static)
@@ -5484,7 +6894,7 @@
-allow-undefined)
# FIXME: remove this flag sometime in the future.
- func_fatal_error "\`-allow-undefined' must not be used because it is the default"
+ func_fatal_error "'-allow-undefined' must not be used because it is the default"
;;
-avoid-version)
@@ -5516,7 +6926,7 @@
if test -n "$export_symbols" || test -n "$export_symbols_regex"; then
func_fatal_error "more than one -exported-symbols argument is not allowed"
fi
- if test "X$arg" = "X-export-symbols"; then
+ if test X-export-symbols = "X$arg"; then
prev=expsyms
else
prev=expsyms_regex
@@ -5550,9 +6960,9 @@
func_stripname "-L" '' "$arg"
if test -z "$func_stripname_result"; then
if test "$#" -gt 0; then
- func_fatal_error "require no space between \`-L' and \`$1'"
+ func_fatal_error "require no space between '-L' and '$1'"
else
- func_fatal_error "need path for \`-L' option"
+ func_fatal_error "need path for '-L' option"
fi
fi
func_resolve_sysroot "$func_stripname_result"
@@ -5563,8 +6973,8 @@
*)
absdir=`cd "$dir" && pwd`
test -z "$absdir" && \
- func_fatal_error "cannot determine absolute directory name of \`$dir'"
- dir="$absdir"
+ func_fatal_error "cannot determine absolute directory name of '$dir'"
+ dir=$absdir
;;
esac
case "$deplibs " in
@@ -5599,7 +7009,7 @@
;;
-l*)
- if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
+ if test X-lc = "X$arg" || test X-lm = "X$arg"; then
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
# These systems don't actually have a C or math library (as such)
@@ -5607,11 +7017,11 @@
;;
*-*-os2*)
# These systems don't actually have a C library (as such)
- test "X$arg" = "X-lc" && continue
+ test X-lc = "X$arg" && continue
;;
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
# Do not include libc due to us having libc/libc_r.
- test "X$arg" = "X-lc" && continue
+ test X-lc = "X$arg" && continue
;;
*-*-rhapsody* | *-*-darwin1.[012])
# Rhapsody C and math libraries are in the System framework
@@ -5620,16 +7030,16 @@
;;
*-*-sco3.2v5* | *-*-sco5v6*)
# Causes problems with __ctype
- test "X$arg" = "X-lc" && continue
+ test X-lc = "X$arg" && continue
;;
*-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*)
# Compiler inserts libc in the correct place for threads to work
- test "X$arg" = "X-lc" && continue
+ test X-lc = "X$arg" && continue
;;
esac
- elif test "X$arg" = "X-lc_r"; then
+ elif test X-lc_r = "X$arg"; then
case $host in
- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*)
+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* | *-*-bitrig*)
# Do not include libc_r directly, use -pthread flag.
continue
;;
@@ -5639,6 +7049,11 @@
continue
;;
+ -mllvm)
+ prev=mllvm
+ continue
+ ;;
+
-module)
module=yes
continue
@@ -5668,7 +7083,7 @@
;;
-multi_module)
- single_module="${wl}-multi_module"
+ single_module=$wl-multi_module
continue
;;
@@ -5682,8 +7097,8 @@
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin* | *-cegcc*)
# The PATH hackery in wrapper scripts is required on Windows
# and Darwin in order for the loader to find any dlls it needs.
- func_warning "\`-no-install' is ignored for $host"
- func_warning "assuming \`-no-fast-install' instead"
+ func_warning "'-no-install' is ignored for $host"
+ func_warning "assuming '-no-fast-install' instead"
fast_install=no
;;
*) no_install=yes ;;
@@ -5701,6 +7116,11 @@
continue
;;
+ -os2dllname)
+ prev=os2dllname
+ continue
+ ;;
+
-o) prev=output ;;
-precious-files-regex)
@@ -5788,14 +7208,14 @@
func_stripname '-Wc,' '' "$arg"
args=$func_stripname_result
arg=
- save_ifs="$IFS"; IFS=','
+ save_ifs=$IFS; IFS=,
for flag in $args; do
- IFS="$save_ifs"
+ IFS=$save_ifs
func_quote_for_eval "$flag"
func_append arg " $func_quote_for_eval_result"
func_append compiler_flags " $func_quote_for_eval_result"
done
- IFS="$save_ifs"
+ IFS=$save_ifs
func_stripname ' ' '' "$arg"
arg=$func_stripname_result
;;
@@ -5804,15 +7224,15 @@
func_stripname '-Wl,' '' "$arg"
args=$func_stripname_result
arg=
- save_ifs="$IFS"; IFS=','
+ save_ifs=$IFS; IFS=,
for flag in $args; do
- IFS="$save_ifs"
+ IFS=$save_ifs
func_quote_for_eval "$flag"
func_append arg " $wl$func_quote_for_eval_result"
func_append compiler_flags " $wl$func_quote_for_eval_result"
func_append linker_flags " $func_quote_for_eval_result"
done
- IFS="$save_ifs"
+ IFS=$save_ifs
func_stripname ' ' '' "$arg"
arg=$func_stripname_result
;;
@@ -5835,7 +7255,7 @@
# -msg_* for osf cc
-msg_*)
func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
+ arg=$func_quote_for_eval_result
;;
# Flags to be passed through unchanged, with rationale:
@@ -5847,25 +7267,46 @@
# -m*, -t[45]*, -txscale* architecture-specific flags for GCC
# -F/path path to uninstalled frameworks, gcc on darwin
# -p, -pg, --coverage, -fprofile-* profiling flags for GCC
+ # -fstack-protector* stack protector flags for GCC
# @file GCC response files
# -tp=* Portland pgcc target processor selection
# --sysroot=* for sysroot support
- # -O*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+ # -O*, -g*, -flto*, -fwhopr*, -fuse-linker-plugin GCC link-time optimization
+ # -stdlib=* select c++ std lib with clang
-64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
-t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*|--sysroot=*| \
- -O*|-flto*|-fwhopr*|-fuse-linker-plugin)
+ -O*|-g*|-flto*|-fwhopr*|-fuse-linker-plugin|-fstack-protector*|-stdlib=*)
func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
+ arg=$func_quote_for_eval_result
func_append compile_command " $arg"
func_append finalize_command " $arg"
func_append compiler_flags " $arg"
continue
;;
+ -Z*)
+ if test os2 = "`expr $host : '.*\(os2\)'`"; then
+ # OS/2 uses -Zxxx to specify OS/2-specific options
+ compiler_flags="$compiler_flags $arg"
+ func_append compile_command " $arg"
+ func_append finalize_command " $arg"
+ case $arg in
+ -Zlinker | -Zstack)
+ prev=xcompiler
+ ;;
+ esac
+ continue
+ else
+ # Otherwise treat like 'Some other compiler flag' below
+ func_quote_for_eval "$arg"
+ arg=$func_quote_for_eval_result
+ fi
+ ;;
+
# Some other compiler flag.
-* | +*)
func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
+ arg=$func_quote_for_eval_result
;;
*.$objext)
@@ -5886,21 +7327,21 @@
if test -z "$pic_object" ||
test -z "$non_pic_object" ||
- test "$pic_object" = none &&
- test "$non_pic_object" = none; then
- func_fatal_error "cannot find name of object for \`$arg'"
+ test none = "$pic_object" &&
+ test none = "$non_pic_object"; then
+ func_fatal_error "cannot find name of object for '$arg'"
fi
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
+ xdir=$func_dirname_result
- if test "$pic_object" != none; then
+ test none = "$pic_object" || {
# Prepend the subdirectory the object is found in.
- pic_object="$xdir$pic_object"
+ pic_object=$xdir$pic_object
- if test "$prev" = dlfiles; then
- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then
+ if test dlfiles = "$prev"; then
+ if test yes = "$build_libtool_libs" && test yes = "$dlopen_support"; then
func_append dlfiles " $pic_object"
prev=
continue
@@ -5911,7 +7352,7 @@
fi
# CHECK ME: I think I busted this. -Ossama
- if test "$prev" = dlprefiles; then
+ if test dlprefiles = "$prev"; then
# Preload the old-style object.
func_append dlprefiles " $pic_object"
prev=
@@ -5919,23 +7360,23 @@
# A PIC object.
func_append libobjs " $pic_object"
- arg="$pic_object"
- fi
+ arg=$pic_object
+ }
# Non-PIC object.
- if test "$non_pic_object" != none; then
+ if test none != "$non_pic_object"; then
# Prepend the subdirectory the object is found in.
- non_pic_object="$xdir$non_pic_object"
+ non_pic_object=$xdir$non_pic_object
# A standard non-PIC object
func_append non_pic_objects " $non_pic_object"
- if test -z "$pic_object" || test "$pic_object" = none ; then
- arg="$non_pic_object"
+ if test -z "$pic_object" || test none = "$pic_object"; then
+ arg=$non_pic_object
fi
else
# If the PIC object exists, use it instead.
# $xdir was prepended to $pic_object above.
- non_pic_object="$pic_object"
+ non_pic_object=$pic_object
func_append non_pic_objects " $non_pic_object"
fi
else
@@ -5943,7 +7384,7 @@
if $opt_dry_run; then
# Extract subdirectory from the argument.
func_dirname "$arg" "/" ""
- xdir="$func_dirname_result"
+ xdir=$func_dirname_result
func_lo2o "$arg"
pic_object=$xdir$objdir/$func_lo2o_result
@@ -5951,7 +7392,7 @@
func_append libobjs " $pic_object"
func_append non_pic_objects " $non_pic_object"
else
- func_fatal_error "\`$arg' is not a valid libtool object"
+ func_fatal_error "'$arg' is not a valid libtool object"
fi
fi
;;
@@ -5967,11 +7408,11 @@
# A libtool-controlled library.
func_resolve_sysroot "$arg"
- if test "$prev" = dlfiles; then
+ if test dlfiles = "$prev"; then
# This library was specified with -dlopen.
func_append dlfiles " $func_resolve_sysroot_result"
prev=
- elif test "$prev" = dlprefiles; then
+ elif test dlprefiles = "$prev"; then
# The library was specified with -dlpreopen.
func_append dlprefiles " $func_resolve_sysroot_result"
prev=
@@ -5986,7 +7427,7 @@
# Unknown arguments in both finalize_command and compile_command need
# to be aesthetically quoted because they are evaled later.
func_quote_for_eval "$arg"
- arg="$func_quote_for_eval_result"
+ arg=$func_quote_for_eval_result
;;
esac # arg
@@ -5998,9 +7439,9 @@
done # argument parsing loop
test -n "$prev" && \
- func_fatal_help "the \`$prevarg' option requires an argument"
+ func_fatal_help "the '$prevarg' option requires an argument"
- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then
+ if test yes = "$export_dynamic" && test -n "$export_dynamic_flag_spec"; then
eval arg=\"$export_dynamic_flag_spec\"
func_append compile_command " $arg"
func_append finalize_command " $arg"
@@ -6009,20 +7450,23 @@
oldlibs=
# calculate the name of the file, without its directory
func_basename "$output"
- outputname="$func_basename_result"
- libobjs_save="$libobjs"
+ outputname=$func_basename_result
+ libobjs_save=$libobjs
if test -n "$shlibpath_var"; then
# get the directories listed in $shlibpath_var
- eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
+ eval shlib_search_path=\`\$ECHO \"\$$shlibpath_var\" \| \$SED \'s/:/ /g\'\`
else
shlib_search_path=
fi
eval sys_lib_search_path=\"$sys_lib_search_path_spec\"
eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\"
+ # Definition is injected by LT_CONFIG during libtool generation.
+ func_munge_path_list sys_lib_dlsearch_path "$LT_SYS_LIBRARY_PATH"
+
func_dirname "$output" "/" ""
- output_objdir="$func_dirname_result$objdir"
+ output_objdir=$func_dirname_result$objdir
func_to_tool_file "$output_objdir/"
tool_output_objdir=$func_to_tool_file_result
# Create the object directory.
@@ -6045,7 +7489,7 @@
# Find all interdependent deplibs by searching for libraries
# that are linked more than once (e.g. -la -lb -la)
for deplib in $deplibs; do
- if $opt_preserve_dup_deps ; then
+ if $opt_preserve_dup_deps; then
case "$libs " in
*" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
@@ -6053,7 +7497,7 @@
func_append libs " $deplib"
done
- if test "$linkmode" = lib; then
+ if test lib = "$linkmode"; then
libs="$predeps $libs $compiler_lib_search_path $postdeps"
# Compute libraries that are listed more than once in $predeps
@@ -6085,7 +7529,7 @@
case $file in
*.la) ;;
*)
- func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file"
+ func_fatal_help "libraries can '-dlopen' only libtool libraries: $file"
;;
esac
done
@@ -6093,7 +7537,7 @@
prog)
compile_deplibs=
finalize_deplibs=
- alldeplibs=no
+ alldeplibs=false
newdlfiles=
newdlprefiles=
passes="conv scan dlopen dlpreopen link"
@@ -6105,29 +7549,29 @@
for pass in $passes; do
# The preopen pass in lib mode reverses $deplibs; put it back here
# so that -L comes before libs that need it for instance...
- if test "$linkmode,$pass" = "lib,link"; then
+ if test lib,link = "$linkmode,$pass"; then
## FIXME: Find the place where the list is rebuilt in the wrong
## order, and fix it there properly
tmp_deplibs=
for deplib in $deplibs; do
tmp_deplibs="$deplib $tmp_deplibs"
done
- deplibs="$tmp_deplibs"
+ deplibs=$tmp_deplibs
fi
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan"; then
- libs="$deplibs"
+ if test lib,link = "$linkmode,$pass" ||
+ test prog,scan = "$linkmode,$pass"; then
+ libs=$deplibs
deplibs=
fi
- if test "$linkmode" = prog; then
+ if test prog = "$linkmode"; then
case $pass in
- dlopen) libs="$dlfiles" ;;
- dlpreopen) libs="$dlprefiles" ;;
+ dlopen) libs=$dlfiles ;;
+ dlpreopen) libs=$dlprefiles ;;
link) libs="$deplibs %DEPLIBS% $dependency_libs" ;;
esac
fi
- if test "$linkmode,$pass" = "lib,dlpreopen"; then
+ if test lib,dlpreopen = "$linkmode,$pass"; then
# Collect and forward deplibs of preopened libtool libs
for lib in $dlprefiles; do
# Ignore non-libtool-libs
@@ -6148,26 +7592,26 @@
esac
done
done
- libs="$dlprefiles"
+ libs=$dlprefiles
fi
- if test "$pass" = dlopen; then
+ if test dlopen = "$pass"; then
# Collect dlpreopened libraries
- save_deplibs="$deplibs"
+ save_deplibs=$deplibs
deplibs=
fi
for deplib in $libs; do
lib=
- found=no
+ found=false
case $deplib in
-mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe \
|-threads|-fopenmp|-openmp|-mp|-xopenmp|-omp|-qsmp=*)
- if test "$linkmode,$pass" = "prog,link"; then
+ if test prog,link = "$linkmode,$pass"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
func_append compiler_flags " $deplib"
- if test "$linkmode" = lib ; then
+ if test lib = "$linkmode"; then
case "$new_inherited_linker_flags " in
*" $deplib "*) ;;
* ) func_append new_inherited_linker_flags " $deplib" ;;
@@ -6177,13 +7621,13 @@
continue
;;
-l*)
- if test "$linkmode" != lib && test "$linkmode" != prog; then
- func_warning "\`-l' is ignored for archives/objects"
+ if test lib != "$linkmode" && test prog != "$linkmode"; then
+ func_warning "'-l' is ignored for archives/objects"
continue
fi
func_stripname '-l' '' "$deplib"
name=$func_stripname_result
- if test "$linkmode" = lib; then
+ if test lib = "$linkmode"; then
searchdirs="$newlib_search_path $lib_search_path $compiler_lib_search_dirs $sys_lib_search_path $shlib_search_path"
else
searchdirs="$newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path"
@@ -6191,31 +7635,22 @@
for searchdir in $searchdirs; do
for search_ext in .la $std_shrext .so .a; do
# Search the libtool library
- lib="$searchdir/lib${name}${search_ext}"
+ lib=$searchdir/lib$name$search_ext
if test -f "$lib"; then
- if test "$search_ext" = ".la"; then
- found=yes
+ if test .la = "$search_ext"; then
+ found=:
else
- found=no
+ found=false
fi
break 2
fi
done
done
- if test "$found" != yes; then
- # deplib doesn't seem to be a libtool library
- if test "$linkmode,$pass" = "prog,link"; then
- compile_deplibs="$deplib $compile_deplibs"
- finalize_deplibs="$deplib $finalize_deplibs"
- else
- deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
- fi
- continue
- else # deplib is a libtool library
+ if $found; then
+ # deplib is a libtool library
# If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib,
# We need to do some special things here, and not later.
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $deplib "*)
if func_lalib_p "$lib"; then
@@ -6223,19 +7658,19 @@
old_library=
func_source "$lib"
for l in $old_library $library_names; do
- ll="$l"
+ ll=$l
done
- if test "X$ll" = "X$old_library" ; then # only static version available
- found=no
+ if test "X$ll" = "X$old_library"; then # only static version available
+ found=false
func_dirname "$lib" "" "."
- ladir="$func_dirname_result"
+ ladir=$func_dirname_result
lib=$ladir/$old_library
- if test "$linkmode,$pass" = "prog,link"; then
+ if test prog,link = "$linkmode,$pass"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
deplibs="$deplib $deplibs"
- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs"
+ test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
fi
continue
fi
@@ -6244,15 +7679,25 @@
*) ;;
esac
fi
+ else
+ # deplib doesn't seem to be a libtool library
+ if test prog,link = "$linkmode,$pass"; then
+ compile_deplibs="$deplib $compile_deplibs"
+ finalize_deplibs="$deplib $finalize_deplibs"
+ else
+ deplibs="$deplib $deplibs"
+ test lib = "$linkmode" && newdependency_libs="$deplib $newdependency_libs"
+ fi
+ continue
fi
;; # -l
*.ltframework)
- if test "$linkmode,$pass" = "prog,link"; then
+ if test prog,link = "$linkmode,$pass"; then
compile_deplibs="$deplib $compile_deplibs"
finalize_deplibs="$deplib $finalize_deplibs"
else
deplibs="$deplib $deplibs"
- if test "$linkmode" = lib ; then
+ if test lib = "$linkmode"; then
case "$new_inherited_linker_flags " in
*" $deplib "*) ;;
* ) func_append new_inherited_linker_flags " $deplib" ;;
@@ -6265,18 +7710,18 @@
case $linkmode in
lib)
deplibs="$deplib $deplibs"
- test "$pass" = conv && continue
+ test conv = "$pass" && continue
newdependency_libs="$deplib $newdependency_libs"
func_stripname '-L' '' "$deplib"
func_resolve_sysroot "$func_stripname_result"
func_append newlib_search_path " $func_resolve_sysroot_result"
;;
prog)
- if test "$pass" = conv; then
+ if test conv = "$pass"; then
deplibs="$deplib $deplibs"
continue
fi
- if test "$pass" = scan; then
+ if test scan = "$pass"; then
deplibs="$deplib $deplibs"
else
compile_deplibs="$deplib $compile_deplibs"
@@ -6287,13 +7732,13 @@
func_append newlib_search_path " $func_resolve_sysroot_result"
;;
*)
- func_warning "\`-L' is ignored for archives/objects"
+ func_warning "'-L' is ignored for archives/objects"
;;
esac # linkmode
continue
;; # -L
-R*)
- if test "$pass" = link; then
+ if test link = "$pass"; then
func_stripname '-R' '' "$deplib"
func_resolve_sysroot "$func_stripname_result"
dir=$func_resolve_sysroot_result
@@ -6311,7 +7756,7 @@
lib=$func_resolve_sysroot_result
;;
*.$libext)
- if test "$pass" = conv; then
+ if test conv = "$pass"; then
deplibs="$deplib $deplibs"
continue
fi
@@ -6322,21 +7767,26 @@
case " $dlpreconveniencelibs " in
*" $deplib "*) ;;
*)
- valid_a_lib=no
+ valid_a_lib=false
case $deplibs_check_method in
match_pattern*)
set dummy $deplibs_check_method; shift
match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
| $EGREP "$match_pattern_regex" > /dev/null; then
- valid_a_lib=yes
+ valid_a_lib=:
fi
;;
pass_all)
- valid_a_lib=yes
+ valid_a_lib=:
;;
esac
- if test "$valid_a_lib" != yes; then
+ if $valid_a_lib; then
+ echo
+ $ECHO "*** Warning: Linking the shared library $output against the"
+ $ECHO "*** static library $deplib is not portable!"
+ deplibs="$deplib $deplibs"
+ else
echo
$ECHO "*** Warning: Trying to link with static lib archive $deplib."
echo "*** I have the capability to make that library automatically link in when"
@@ -6344,18 +7794,13 @@
echo "*** shared version of the library, which you do not appear to have"
echo "*** because the file extensions .$libext of this argument makes me believe"
echo "*** that it is just a static archive that I should not use here."
- else
- echo
- $ECHO "*** Warning: Linking the shared library $output against the"
- $ECHO "*** static library $deplib is not portable!"
- deplibs="$deplib $deplibs"
fi
;;
esac
continue
;;
prog)
- if test "$pass" != link; then
+ if test link != "$pass"; then
deplibs="$deplib $deplibs"
else
compile_deplibs="$deplib $compile_deplibs"
@@ -6366,10 +7811,10 @@
esac # linkmode
;; # *.$libext
*.lo | *.$objext)
- if test "$pass" = conv; then
+ if test conv = "$pass"; then
deplibs="$deplib $deplibs"
- elif test "$linkmode" = prog; then
- if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then
+ elif test prog = "$linkmode"; then
+ if test dlpreopen = "$pass" || test yes != "$dlopen_support" || test no = "$build_libtool_libs"; then
# If there is no dlopen support or we're linking statically,
# we need to preload.
func_append newdlprefiles " $deplib"
@@ -6382,22 +7827,20 @@
continue
;;
%DEPLIBS%)
- alldeplibs=yes
+ alldeplibs=:
continue
;;
esac # case $deplib
- if test "$found" = yes || test -f "$lib"; then :
- else
- func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'"
- fi
+ $found || test -f "$lib" \
+ || func_fatal_error "cannot find the library '$lib' or unhandled argument '$deplib'"
# Check to see that this really is a libtool archive.
func_lalib_unsafe_p "$lib" \
- || func_fatal_error "\`$lib' is not a valid libtool archive"
+ || func_fatal_error "'$lib' is not a valid libtool archive"
func_dirname "$lib" "" "."
- ladir="$func_dirname_result"
+ ladir=$func_dirname_result
dlname=
dlopen=
@@ -6427,30 +7870,30 @@
done
fi
dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
- if test "$linkmode,$pass" = "lib,link" ||
- test "$linkmode,$pass" = "prog,scan" ||
- { test "$linkmode" != prog && test "$linkmode" != lib; }; then
+ if test lib,link = "$linkmode,$pass" ||
+ test prog,scan = "$linkmode,$pass" ||
+ { test prog != "$linkmode" && test lib != "$linkmode"; }; then
test -n "$dlopen" && func_append dlfiles " $dlopen"
test -n "$dlpreopen" && func_append dlprefiles " $dlpreopen"
fi
- if test "$pass" = conv; then
+ if test conv = "$pass"; then
# Only check for convenience libraries
deplibs="$lib $deplibs"
if test -z "$libdir"; then
if test -z "$old_library"; then
- func_fatal_error "cannot find name of link library for \`$lib'"
+ func_fatal_error "cannot find name of link library for '$lib'"
fi
# It is a libtool convenience library, so add in its objects.
func_append convenience " $ladir/$objdir/$old_library"
func_append old_convenience " $ladir/$objdir/$old_library"
- elif test "$linkmode" != prog && test "$linkmode" != lib; then
- func_fatal_error "\`$lib' is not a convenience library"
+ elif test prog != "$linkmode" && test lib != "$linkmode"; then
+ func_fatal_error "'$lib' is not a convenience library"
fi
tmp_libs=
for deplib in $dependency_libs; do
deplibs="$deplib $deplibs"
- if $opt_preserve_dup_deps ; then
+ if $opt_preserve_dup_deps; then
case "$tmp_libs " in
*" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
@@ -6464,26 +7907,26 @@
# Get the name of the library we link against.
linklib=
if test -n "$old_library" &&
- { test "$prefer_static_libs" = yes ||
- test "$prefer_static_libs,$installed" = "built,no"; }; then
+ { test yes = "$prefer_static_libs" ||
+ test built,no = "$prefer_static_libs,$installed"; }; then
linklib=$old_library
else
for l in $old_library $library_names; do
- linklib="$l"
+ linklib=$l
done
fi
if test -z "$linklib"; then
- func_fatal_error "cannot find name of link library for \`$lib'"
+ func_fatal_error "cannot find name of link library for '$lib'"
fi
# This library was specified with -dlopen.
- if test "$pass" = dlopen; then
- if test -z "$libdir"; then
- func_fatal_error "cannot -dlopen a convenience library: \`$lib'"
- fi
+ if test dlopen = "$pass"; then
+ test -z "$libdir" \
+ && func_fatal_error "cannot -dlopen a convenience library: '$lib'"
if test -z "$dlname" ||
- test "$dlopen_support" != yes ||
- test "$build_libtool_libs" = no; then
+ test yes != "$dlopen_support" ||
+ test no = "$build_libtool_libs"
+ then
# If there is no dlname, no dlopen support or we're linking
# statically, we need to preload. We also need to preload any
# dependent libraries so libltdl's deplib preloader doesn't
@@ -6497,40 +7940,40 @@
# We need an absolute path.
case $ladir in
- [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir=$ladir ;;
*)
abs_ladir=`cd "$ladir" && pwd`
if test -z "$abs_ladir"; then
- func_warning "cannot determine absolute directory name of \`$ladir'"
+ func_warning "cannot determine absolute directory name of '$ladir'"
func_warning "passing it literally to the linker, although it might fail"
- abs_ladir="$ladir"
+ abs_ladir=$ladir
fi
;;
esac
func_basename "$lib"
- laname="$func_basename_result"
+ laname=$func_basename_result
# Find the relevant object directory and library name.
- if test "X$installed" = Xyes; then
+ if test yes = "$installed"; then
if test ! -f "$lt_sysroot$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- func_warning "library \`$lib' was moved."
- dir="$ladir"
- absdir="$abs_ladir"
- libdir="$abs_ladir"
+ func_warning "library '$lib' was moved."
+ dir=$ladir
+ absdir=$abs_ladir
+ libdir=$abs_ladir
else
- dir="$lt_sysroot$libdir"
- absdir="$lt_sysroot$libdir"
+ dir=$lt_sysroot$libdir
+ absdir=$lt_sysroot$libdir
fi
- test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes
+ test yes = "$hardcode_automatic" && avoidtemprpath=yes
else
if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then
- dir="$ladir"
- absdir="$abs_ladir"
+ dir=$ladir
+ absdir=$abs_ladir
# Remove this search path later
func_append notinst_path " $abs_ladir"
else
- dir="$ladir/$objdir"
- absdir="$abs_ladir/$objdir"
+ dir=$ladir/$objdir
+ absdir=$abs_ladir/$objdir
# Remove this search path later
func_append notinst_path " $abs_ladir"
fi
@@ -6539,11 +7982,11 @@
name=$func_stripname_result
# This library was specified with -dlpreopen.
- if test "$pass" = dlpreopen; then
- if test -z "$libdir" && test "$linkmode" = prog; then
- func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'"
+ if test dlpreopen = "$pass"; then
+ if test -z "$libdir" && test prog = "$linkmode"; then
+ func_fatal_error "only libraries may -dlpreopen a convenience library: '$lib'"
fi
- case "$host" in
+ case $host in
# special handling for platforms with PE-DLLs.
*cygwin* | *mingw* | *cegcc* )
# Linker will automatically link against shared library if both
@@ -6587,9 +8030,9 @@
if test -z "$libdir"; then
# Link the convenience library
- if test "$linkmode" = lib; then
+ if test lib = "$linkmode"; then
deplibs="$dir/$old_library $deplibs"
- elif test "$linkmode,$pass" = "prog,link"; then
+ elif test prog,link = "$linkmode,$pass"; then
compile_deplibs="$dir/$old_library $compile_deplibs"
finalize_deplibs="$dir/$old_library $finalize_deplibs"
else
@@ -6599,14 +8042,14 @@
fi
- if test "$linkmode" = prog && test "$pass" != link; then
+ if test prog = "$linkmode" && test link != "$pass"; then
func_append newlib_search_path " $ladir"
deplibs="$lib $deplibs"
- linkalldeplibs=no
- if test "$link_all_deplibs" != no || test -z "$library_names" ||
- test "$build_libtool_libs" = no; then
- linkalldeplibs=yes
+ linkalldeplibs=false
+ if test no != "$link_all_deplibs" || test -z "$library_names" ||
+ test no = "$build_libtool_libs"; then
+ linkalldeplibs=:
fi
tmp_libs=
@@ -6618,14 +8061,14 @@
;;
esac
# Need to link against all dependency_libs?
- if test "$linkalldeplibs" = yes; then
+ if $linkalldeplibs; then
deplibs="$deplib $deplibs"
else
# Need to hardcode shared library paths
# or/and link against static libraries
newdependency_libs="$deplib $newdependency_libs"
fi
- if $opt_preserve_dup_deps ; then
+ if $opt_preserve_dup_deps; then
case "$tmp_libs " in
*" $deplib "*) func_append specialdeplibs " $deplib" ;;
esac
@@ -6635,15 +8078,15 @@
continue
fi # $linkmode = prog...
- if test "$linkmode,$pass" = "prog,link"; then
+ if test prog,link = "$linkmode,$pass"; then
if test -n "$library_names" &&
- { { test "$prefer_static_libs" = no ||
- test "$prefer_static_libs,$installed" = "built,yes"; } ||
+ { { test no = "$prefer_static_libs" ||
+ test built,yes = "$prefer_static_libs,$installed"; } ||
test -z "$old_library"; }; then
# We need to hardcode the library path
- if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath"; then
# Make sure the rpath contains only unique directories.
- case "$temp_rpath:" in
+ case $temp_rpath: in
*"$absdir:"*) ;;
*) func_append temp_rpath "$absdir:" ;;
esac
@@ -6672,9 +8115,9 @@
esac
fi # $linkmode,$pass = prog,link...
- if test "$alldeplibs" = yes &&
- { test "$deplibs_check_method" = pass_all ||
- { test "$build_libtool_libs" = yes &&
+ if $alldeplibs &&
+ { test pass_all = "$deplibs_check_method" ||
+ { test yes = "$build_libtool_libs" &&
test -n "$library_names"; }; }; then
# We only need to search for static libraries
continue
@@ -6683,19 +8126,19 @@
link_static=no # Whether the deplib will be linked statically
use_static_libs=$prefer_static_libs
- if test "$use_static_libs" = built && test "$installed" = yes; then
+ if test built = "$use_static_libs" && test yes = "$installed"; then
use_static_libs=no
fi
if test -n "$library_names" &&
- { test "$use_static_libs" = no || test -z "$old_library"; }; then
+ { test no = "$use_static_libs" || test -z "$old_library"; }; then
case $host in
- *cygwin* | *mingw* | *cegcc*)
+ *cygwin* | *mingw* | *cegcc* | *os2*)
# No point in relinking DLLs because paths are not encoded
func_append notinst_deplibs " $lib"
need_relink=no
;;
*)
- if test "$installed" = no; then
+ if test no = "$installed"; then
func_append notinst_deplibs " $lib"
need_relink=yes
fi
@@ -6705,24 +8148,24 @@
# Warn about portability, can't link against -module's on some
# systems (darwin). Don't bleat about dlopened modules though!
- dlopenmodule=""
+ dlopenmodule=
for dlpremoduletest in $dlprefiles; do
if test "X$dlpremoduletest" = "X$lib"; then
- dlopenmodule="$dlpremoduletest"
+ dlopenmodule=$dlpremoduletest
break
fi
done
- if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
+ if test -z "$dlopenmodule" && test yes = "$shouldnotlink" && test link = "$pass"; then
echo
- if test "$linkmode" = prog; then
+ if test prog = "$linkmode"; then
$ECHO "*** Warning: Linking the executable $output against the loadable module"
else
$ECHO "*** Warning: Linking the shared library $output against the loadable module"
fi
$ECHO "*** $linklib is not portable!"
fi
- if test "$linkmode" = lib &&
- test "$hardcode_into_libs" = yes; then
+ if test lib = "$linkmode" &&
+ test yes = "$hardcode_into_libs"; then
# Hardcode the library path.
# Skip directories that are in the system default run-time
# search path.
@@ -6750,43 +8193,43 @@
# figure out the soname
set dummy $library_names
shift
- realname="$1"
+ realname=$1
shift
libname=`eval "\\$ECHO \"$libname_spec\""`
# use dlname if we got it. it's perfectly good, no?
if test -n "$dlname"; then
- soname="$dlname"
+ soname=$dlname
elif test -n "$soname_spec"; then
# bleh windows
case $host in
- *cygwin* | mingw* | *cegcc*)
+ *cygwin* | mingw* | *cegcc* | *os2*)
func_arith $current - $age
major=$func_arith_result
- versuffix="-$major"
+ versuffix=-$major
;;
esac
eval soname=\"$soname_spec\"
else
- soname="$realname"
+ soname=$realname
fi
# Make a new name for the extract_expsyms_cmds to use
- soroot="$soname"
+ soroot=$soname
func_basename "$soroot"
- soname="$func_basename_result"
+ soname=$func_basename_result
func_stripname 'lib' '.dll' "$soname"
newlib=libimp-$func_stripname_result.a
# If the library has no export list, then create one now
if test -f "$output_objdir/$soname-def"; then :
else
- func_verbose "extracting exported symbol list from \`$soname'"
+ func_verbose "extracting exported symbol list from '$soname'"
func_execute_cmds "$extract_expsyms_cmds" 'exit $?'
fi
# Create $newlib
if test -f "$output_objdir/$newlib"; then :; else
- func_verbose "generating import library for \`$soname'"
+ func_verbose "generating import library for '$soname'"
func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?'
fi
# make sure the library variables are pointing to the new library
@@ -6794,58 +8237,58 @@
linklib=$newlib
fi # test -n "$old_archive_from_expsyms_cmds"
- if test "$linkmode" = prog || test "$opt_mode" != relink; then
+ if test prog = "$linkmode" || test relink != "$opt_mode"; then
add_shlibpath=
add_dir=
add=
lib_linked=yes
case $hardcode_action in
immediate | unsupported)
- if test "$hardcode_direct" = no; then
- add="$dir/$linklib"
+ if test no = "$hardcode_direct"; then
+ add=$dir/$linklib
case $host in
- *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;;
- *-*-sysv4*uw2*) add_dir="-L$dir" ;;
+ *-*-sco3.2v5.0.[024]*) add_dir=-L$dir ;;
+ *-*-sysv4*uw2*) add_dir=-L$dir ;;
*-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \
- *-*-unixware7*) add_dir="-L$dir" ;;
+ *-*-unixware7*) add_dir=-L$dir ;;
*-*-darwin* )
- # if the lib is a (non-dlopened) module then we can not
+ # if the lib is a (non-dlopened) module then we cannot
# link against it, someone is ignoring the earlier warnings
if /usr/bin/file -L $add 2> /dev/null |
- $GREP ": [^:]* bundle" >/dev/null ; then
+ $GREP ": [^:]* bundle" >/dev/null; then
if test "X$dlopenmodule" != "X$lib"; then
$ECHO "*** Warning: lib $linklib is a module, not a shared library"
- if test -z "$old_library" ; then
+ if test -z "$old_library"; then
echo
echo "*** And there doesn't seem to be a static archive available"
echo "*** The link will probably fail, sorry"
else
- add="$dir/$old_library"
+ add=$dir/$old_library
fi
elif test -n "$old_library"; then
- add="$dir/$old_library"
+ add=$dir/$old_library
fi
fi
esac
- elif test "$hardcode_minus_L" = no; then
+ elif test no = "$hardcode_minus_L"; then
case $host in
- *-*-sunos*) add_shlibpath="$dir" ;;
+ *-*-sunos*) add_shlibpath=$dir ;;
esac
- add_dir="-L$dir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = no; then
- add_shlibpath="$dir"
- add="-l$name"
+ add_dir=-L$dir
+ add=-l$name
+ elif test no = "$hardcode_shlibpath_var"; then
+ add_shlibpath=$dir
+ add=-l$name
else
lib_linked=no
fi
;;
relink)
- if test "$hardcode_direct" = yes &&
- test "$hardcode_direct_absolute" = no; then
- add="$dir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$absdir"
+ if test yes = "$hardcode_direct" &&
+ test no = "$hardcode_direct_absolute"; then
+ add=$dir/$linklib
+ elif test yes = "$hardcode_minus_L"; then
+ add_dir=-L$absdir
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
case $libdir in
@@ -6854,10 +8297,10 @@
;;
esac
fi
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
- add_shlibpath="$dir"
- add="-l$name"
+ add=-l$name
+ elif test yes = "$hardcode_shlibpath_var"; then
+ add_shlibpath=$dir
+ add=-l$name
else
lib_linked=no
fi
@@ -6865,7 +8308,7 @@
*) lib_linked=no ;;
esac
- if test "$lib_linked" != yes; then
+ if test yes != "$lib_linked"; then
func_fatal_configuration "unsupported hardcode properties"
fi
@@ -6875,15 +8318,15 @@
*) func_append compile_shlibpath "$add_shlibpath:" ;;
esac
fi
- if test "$linkmode" = prog; then
+ if test prog = "$linkmode"; then
test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs"
test -n "$add" && compile_deplibs="$add $compile_deplibs"
else
test -n "$add_dir" && deplibs="$add_dir $deplibs"
test -n "$add" && deplibs="$add $deplibs"
- if test "$hardcode_direct" != yes &&
- test "$hardcode_minus_L" != yes &&
- test "$hardcode_shlibpath_var" = yes; then
+ if test yes != "$hardcode_direct" &&
+ test yes != "$hardcode_minus_L" &&
+ test yes = "$hardcode_shlibpath_var"; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
*) func_append finalize_shlibpath "$libdir:" ;;
@@ -6892,33 +8335,33 @@
fi
fi
- if test "$linkmode" = prog || test "$opt_mode" = relink; then
+ if test prog = "$linkmode" || test relink = "$opt_mode"; then
add_shlibpath=
add_dir=
add=
# Finalize command for both is simple: just hardcode it.
- if test "$hardcode_direct" = yes &&
- test "$hardcode_direct_absolute" = no; then
- add="$libdir/$linklib"
- elif test "$hardcode_minus_L" = yes; then
- add_dir="-L$libdir"
- add="-l$name"
- elif test "$hardcode_shlibpath_var" = yes; then
+ if test yes = "$hardcode_direct" &&
+ test no = "$hardcode_direct_absolute"; then
+ add=$libdir/$linklib
+ elif test yes = "$hardcode_minus_L"; then
+ add_dir=-L$libdir
+ add=-l$name
+ elif test yes = "$hardcode_shlibpath_var"; then
case :$finalize_shlibpath: in
*":$libdir:"*) ;;
*) func_append finalize_shlibpath "$libdir:" ;;
esac
- add="-l$name"
- elif test "$hardcode_automatic" = yes; then
+ add=-l$name
+ elif test yes = "$hardcode_automatic"; then
if test -n "$inst_prefix_dir" &&
- test -f "$inst_prefix_dir$libdir/$linklib" ; then
- add="$inst_prefix_dir$libdir/$linklib"
+ test -f "$inst_prefix_dir$libdir/$linklib"; then
+ add=$inst_prefix_dir$libdir/$linklib
else
- add="$libdir/$linklib"
+ add=$libdir/$linklib
fi
else
# We cannot seem to hardcode it, guess we'll fake it.
- add_dir="-L$libdir"
+ add_dir=-L$libdir
# Try looking first in the location we're being installed to.
if test -n "$inst_prefix_dir"; then
case $libdir in
@@ -6927,10 +8370,10 @@
;;
esac
fi
- add="-l$name"
+ add=-l$name
fi
- if test "$linkmode" = prog; then
+ if test prog = "$linkmode"; then
test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs"
test -n "$add" && finalize_deplibs="$add $finalize_deplibs"
else
@@ -6938,43 +8381,43 @@
test -n "$add" && deplibs="$add $deplibs"
fi
fi
- elif test "$linkmode" = prog; then
+ elif test prog = "$linkmode"; then
# Here we assume that one of hardcode_direct or hardcode_minus_L
# is not unsupported. This is valid on all known static and
# shared platforms.
- if test "$hardcode_direct" != unsupported; then
- test -n "$old_library" && linklib="$old_library"
+ if test unsupported != "$hardcode_direct"; then
+ test -n "$old_library" && linklib=$old_library
compile_deplibs="$dir/$linklib $compile_deplibs"
finalize_deplibs="$dir/$linklib $finalize_deplibs"
else
compile_deplibs="-l$name -L$dir $compile_deplibs"
finalize_deplibs="-l$name -L$dir $finalize_deplibs"
fi
- elif test "$build_libtool_libs" = yes; then
+ elif test yes = "$build_libtool_libs"; then
# Not a shared library
- if test "$deplibs_check_method" != pass_all; then
+ if test pass_all != "$deplibs_check_method"; then
# We're trying link a shared library against a static one
# but the system doesn't support it.
# Just print a warning and add the library to dependency_libs so
# that the program can be linked against the static library.
echo
- $ECHO "*** Warning: This system can not link to static lib archive $lib."
+ $ECHO "*** Warning: This system cannot link to static lib archive $lib."
echo "*** I have the capability to make that library automatically link in when"
echo "*** you link to this library. But I can only do this if you have a"
echo "*** shared version of the library, which you do not appear to have."
- if test "$module" = yes; then
+ if test yes = "$module"; then
echo "*** But as you try to build a module library, libtool will still create "
echo "*** a static module, that should work as long as the dlopening application"
echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
if test -z "$global_symbol_pipe"; then
echo
echo "*** However, this would only work if libtool was able to extract symbol"
- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
echo "*** not find such a program. So, this module is probably useless."
- echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ echo "*** 'nm' from GNU binutils and a full rebuild may help."
fi
- if test "$build_old_libs" = no; then
+ if test no = "$build_old_libs"; then
build_libtool_libs=module
build_old_libs=yes
else
@@ -6987,11 +8430,11 @@
fi
fi # link shared/static library?
- if test "$linkmode" = lib; then
+ if test lib = "$linkmode"; then
if test -n "$dependency_libs" &&
- { test "$hardcode_into_libs" != yes ||
- test "$build_old_libs" = yes ||
- test "$link_static" = yes; }; then
+ { test yes != "$hardcode_into_libs" ||
+ test yes = "$build_old_libs" ||
+ test yes = "$link_static"; }; then
# Extract -R from dependency_libs
temp_deplibs=
for libdir in $dependency_libs; do
@@ -7005,12 +8448,12 @@
*) func_append temp_deplibs " $libdir";;
esac
done
- dependency_libs="$temp_deplibs"
+ dependency_libs=$temp_deplibs
fi
func_append newlib_search_path " $absdir"
# Link against this library
- test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
+ test no = "$link_static" && newdependency_libs="$abs_ladir/$laname $newdependency_libs"
# ... and its dependency_libs
tmp_libs=
for deplib in $dependency_libs; do
@@ -7020,7 +8463,7 @@
func_resolve_sysroot "$func_stripname_result";;
*) func_resolve_sysroot "$deplib" ;;
esac
- if $opt_preserve_dup_deps ; then
+ if $opt_preserve_dup_deps; then
case "$tmp_libs " in
*" $func_resolve_sysroot_result "*)
func_append specialdeplibs " $func_resolve_sysroot_result" ;;
@@ -7029,12 +8472,12 @@
func_append tmp_libs " $func_resolve_sysroot_result"
done
- if test "$link_all_deplibs" != no; then
+ if test no != "$link_all_deplibs"; then
# Add the search paths of all dependency libraries
for deplib in $dependency_libs; do
path=
case $deplib in
- -L*) path="$deplib" ;;
+ -L*) path=$deplib ;;
*.la)
func_resolve_sysroot "$deplib"
deplib=$func_resolve_sysroot_result
@@ -7042,12 +8485,12 @@
dir=$func_dirname_result
# We need an absolute path.
case $dir in
- [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) absdir=$dir ;;
*)
absdir=`cd "$dir" && pwd`
if test -z "$absdir"; then
- func_warning "cannot determine absolute directory name of \`$dir'"
- absdir="$dir"
+ func_warning "cannot determine absolute directory name of '$dir'"
+ absdir=$dir
fi
;;
esac
@@ -7055,35 +8498,35 @@
case $host in
*-*-darwin*)
depdepl=
- eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
- if test -n "$deplibrary_names" ; then
- for tmp in $deplibrary_names ; do
+ eval deplibrary_names=`$SED -n -e 's/^library_names=\(.*\)$/\1/p' $deplib`
+ if test -n "$deplibrary_names"; then
+ for tmp in $deplibrary_names; do
depdepl=$tmp
done
- if test -f "$absdir/$objdir/$depdepl" ; then
- depdepl="$absdir/$objdir/$depdepl"
- darwin_install_name=`${OTOOL} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ if test -f "$absdir/$objdir/$depdepl"; then
+ depdepl=$absdir/$objdir/$depdepl
+ darwin_install_name=`$OTOOL -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
if test -z "$darwin_install_name"; then
- darwin_install_name=`${OTOOL64} -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
+ darwin_install_name=`$OTOOL64 -L $depdepl | awk '{if (NR == 2) {print $1;exit}}'`
fi
- func_append compiler_flags " ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}"
- func_append linker_flags " -dylib_file ${darwin_install_name}:${depdepl}"
+ func_append compiler_flags " $wl-dylib_file $wl$darwin_install_name:$depdepl"
+ func_append linker_flags " -dylib_file $darwin_install_name:$depdepl"
path=
fi
fi
;;
*)
- path="-L$absdir/$objdir"
+ path=-L$absdir/$objdir
;;
esac
else
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $deplib`
test -z "$libdir" && \
- func_fatal_error "\`$deplib' is not a valid libtool archive"
+ func_fatal_error "'$deplib' is not a valid libtool archive"
test "$absdir" != "$libdir" && \
- func_warning "\`$deplib' seems to be moved"
+ func_warning "'$deplib' seems to be moved"
- path="-L$absdir"
+ path=-L$absdir
fi
;;
esac
@@ -7095,23 +8538,23 @@
fi # link_all_deplibs != no
fi # linkmode = lib
done # for deplib in $libs
- if test "$pass" = link; then
- if test "$linkmode" = "prog"; then
+ if test link = "$pass"; then
+ if test prog = "$linkmode"; then
compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
else
compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
fi
fi
- dependency_libs="$newdependency_libs"
- if test "$pass" = dlpreopen; then
+ dependency_libs=$newdependency_libs
+ if test dlpreopen = "$pass"; then
# Link the dlpreopened libraries before other libraries
for deplib in $save_deplibs; do
deplibs="$deplib $deplibs"
done
fi
- if test "$pass" != dlopen; then
- if test "$pass" != conv; then
+ if test dlopen != "$pass"; then
+ test conv = "$pass" || {
# Make sure lib_search_path contains only unique directories.
lib_search_path=
for dir in $newlib_search_path; do
@@ -7121,12 +8564,12 @@
esac
done
newlib_search_path=
- fi
+ }
- if test "$linkmode,$pass" != "prog,link"; then
- vars="deplibs"
- else
+ if test prog,link = "$linkmode,$pass"; then
vars="compile_deplibs finalize_deplibs"
+ else
+ vars=deplibs
fi
for var in $vars dependency_libs; do
# Add libraries to $var in reverse order
@@ -7184,62 +8627,93 @@
eval $var=\"$tmp_libs\"
done # for var
fi
+
+ # Add Sun CC postdeps if required:
+ test CXX = "$tagname" && {
+ case $host_os in
+ linux*)
+ case `$CC -V 2>&1 | sed 5q` in
+ *Sun\ C*) # Sun C++ 5.9
+ func_suncc_cstd_abi
+
+ if test no != "$suncc_use_cstd_abi"; then
+ func_append postdeps ' -library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+
+ solaris*)
+ func_cc_basename "$CC"
+ case $func_cc_basename_result in
+ CC* | sunCC*)
+ func_suncc_cstd_abi
+
+ if test no != "$suncc_use_cstd_abi"; then
+ func_append postdeps ' -library=Cstd -library=Crun'
+ fi
+ ;;
+ esac
+ ;;
+ esac
+ }
+
# Last step: remove runtime libs from dependency_libs
# (they stay in deplibs)
tmp_libs=
- for i in $dependency_libs ; do
+ for i in $dependency_libs; do
case " $predeps $postdeps $compiler_lib_search_path " in
*" $i "*)
- i=""
+ i=
;;
esac
- if test -n "$i" ; then
+ if test -n "$i"; then
func_append tmp_libs " $i"
fi
done
dependency_libs=$tmp_libs
done # for pass
- if test "$linkmode" = prog; then
- dlfiles="$newdlfiles"
+ if test prog = "$linkmode"; then
+ dlfiles=$newdlfiles
fi
- if test "$linkmode" = prog || test "$linkmode" = lib; then
- dlprefiles="$newdlprefiles"
+ if test prog = "$linkmode" || test lib = "$linkmode"; then
+ dlprefiles=$newdlprefiles
fi
case $linkmode in
oldlib)
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- func_warning "\`-dlopen' is ignored for archives"
+ if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+ func_warning "'-dlopen' is ignored for archives"
fi
case " $deplibs" in
*\ -l* | *\ -L*)
- func_warning "\`-l' and \`-L' are ignored for archives" ;;
+ func_warning "'-l' and '-L' are ignored for archives" ;;
esac
test -n "$rpath" && \
- func_warning "\`-rpath' is ignored for archives"
+ func_warning "'-rpath' is ignored for archives"
test -n "$xrpath" && \
- func_warning "\`-R' is ignored for archives"
+ func_warning "'-R' is ignored for archives"
test -n "$vinfo" && \
- func_warning "\`-version-info/-version-number' is ignored for archives"
+ func_warning "'-version-info/-version-number' is ignored for archives"
test -n "$release" && \
- func_warning "\`-release' is ignored for archives"
+ func_warning "'-release' is ignored for archives"
test -n "$export_symbols$export_symbols_regex" && \
- func_warning "\`-export-symbols' is ignored for archives"
+ func_warning "'-export-symbols' is ignored for archives"
# Now set the variables for building old libraries.
build_libtool_libs=no
- oldlibs="$output"
+ oldlibs=$output
func_append objs "$old_deplibs"
;;
lib)
- # Make sure we only generate libraries of the form `libNAME.la'.
+ # Make sure we only generate libraries of the form 'libNAME.la'.
case $outputname in
lib*)
func_stripname 'lib' '.la' "$outputname"
@@ -7248,10 +8722,10 @@
eval libname=\"$libname_spec\"
;;
*)
- test "$module" = no && \
- func_fatal_help "libtool library \`$output' must begin with \`lib'"
+ test no = "$module" \
+ && func_fatal_help "libtool library '$output' must begin with 'lib'"
- if test "$need_lib_prefix" != no; then
+ if test no != "$need_lib_prefix"; then
# Add the "lib" prefix for modules if required
func_stripname '' '.la' "$outputname"
name=$func_stripname_result
@@ -7265,8 +8739,8 @@
esac
if test -n "$objs"; then
- if test "$deplibs_check_method" != pass_all; then
- func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
+ if test pass_all != "$deplibs_check_method"; then
+ func_fatal_error "cannot build libtool library '$output' from non-libtool objects on this host:$objs"
else
echo
$ECHO "*** Warning: Linking the shared library $output against the non-libtool"
@@ -7275,21 +8749,21 @@
fi
fi
- test "$dlself" != no && \
- func_warning "\`-dlopen self' is ignored for libtool libraries"
+ test no = "$dlself" \
+ || func_warning "'-dlopen self' is ignored for libtool libraries"
set dummy $rpath
shift
- test "$#" -gt 1 && \
- func_warning "ignoring multiple \`-rpath's for a libtool library"
+ test 1 -lt "$#" \
+ && func_warning "ignoring multiple '-rpath's for a libtool library"
- install_libdir="$1"
+ install_libdir=$1
oldlibs=
if test -z "$rpath"; then
- if test "$build_libtool_libs" = yes; then
+ if test yes = "$build_libtool_libs"; then
# Building a libtool convenience library.
- # Some compilers have problems with a `.al' extension so
+ # Some compilers have problems with a '.al' extension so
# convenience libraries should have the same extension an
# archive normally would.
oldlibs="$output_objdir/$libname.$libext $oldlibs"
@@ -7298,20 +8772,20 @@
fi
test -n "$vinfo" && \
- func_warning "\`-version-info/-version-number' is ignored for convenience libraries"
+ func_warning "'-version-info/-version-number' is ignored for convenience libraries"
test -n "$release" && \
- func_warning "\`-release' is ignored for convenience libraries"
+ func_warning "'-release' is ignored for convenience libraries"
else
# Parse the version information argument.
- save_ifs="$IFS"; IFS=':'
+ save_ifs=$IFS; IFS=:
set dummy $vinfo 0 0 0
shift
- IFS="$save_ifs"
+ IFS=$save_ifs
test -n "$7" && \
- func_fatal_help "too many parameters to \`-version-info'"
+ func_fatal_help "too many parameters to '-version-info'"
# convert absolute version numbers to libtool ages
# this retains compatibility with .la files and attempts
@@ -7319,42 +8793,42 @@
case $vinfo_number in
yes)
- number_major="$1"
- number_minor="$2"
- number_revision="$3"
+ number_major=$1
+ number_minor=$2
+ number_revision=$3
#
# There are really only two kinds -- those that
# use the current revision as the major version
# and those that subtract age and use age as
# a minor version. But, then there is irix
- # which has an extra 1 added just for fun
+ # that has an extra 1 added just for fun
#
case $version_type in
# correct linux to gnu/linux during the next big refactor
- darwin|linux|osf|windows|none)
+ darwin|freebsd-elf|linux|osf|windows|none)
func_arith $number_major + $number_minor
current=$func_arith_result
- age="$number_minor"
- revision="$number_revision"
+ age=$number_minor
+ revision=$number_revision
;;
- freebsd-aout|freebsd-elf|qnx|sunos)
- current="$number_major"
- revision="$number_minor"
- age="0"
+ freebsd-aout|qnx|sunos)
+ current=$number_major
+ revision=$number_minor
+ age=0
;;
irix|nonstopux)
func_arith $number_major + $number_minor
current=$func_arith_result
- age="$number_minor"
- revision="$number_minor"
+ age=$number_minor
+ revision=$number_minor
lt_irix_increment=no
;;
esac
;;
no)
- current="$1"
- revision="$2"
- age="$3"
+ current=$1
+ revision=$2
+ age=$3
;;
esac
@@ -7362,30 +8836,30 @@
case $current in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- func_error "CURRENT \`$current' must be a nonnegative integer"
- func_fatal_error "\`$vinfo' is not valid version information"
+ func_error "CURRENT '$current' must be a nonnegative integer"
+ func_fatal_error "'$vinfo' is not valid version information"
;;
esac
case $revision in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- func_error "REVISION \`$revision' must be a nonnegative integer"
- func_fatal_error "\`$vinfo' is not valid version information"
+ func_error "REVISION '$revision' must be a nonnegative integer"
+ func_fatal_error "'$vinfo' is not valid version information"
;;
esac
case $age in
0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;;
*)
- func_error "AGE \`$age' must be a nonnegative integer"
- func_fatal_error "\`$vinfo' is not valid version information"
+ func_error "AGE '$age' must be a nonnegative integer"
+ func_fatal_error "'$vinfo' is not valid version information"
;;
esac
if test "$age" -gt "$current"; then
- func_error "AGE \`$age' is greater than the current interface number \`$current'"
- func_fatal_error "\`$vinfo' is not valid version information"
+ func_error "AGE '$age' is greater than the current interface number '$current'"
+ func_fatal_error "'$vinfo' is not valid version information"
fi
# Calculate the version variables.
@@ -7400,26 +8874,36 @@
# verstring for coding it into the library header
func_arith $current - $age
major=.$func_arith_result
- versuffix="$major.$age.$revision"
+ versuffix=$major.$age.$revision
# Darwin ld doesn't like 0 for these options...
func_arith $current + 1
minor_current=$func_arith_result
- xlcverstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision"
+ xlcverstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ # On Darwin other compilers
+ case $CC in
+ nagfor*)
+ verstring="$wl-compatibility_version $wl$minor_current $wl-current_version $wl$minor_current.$revision"
+ ;;
+ *)
+ verstring="-compatibility_version $minor_current -current_version $minor_current.$revision"
+ ;;
+ esac
;;
freebsd-aout)
- major=".$current"
- versuffix=".$current.$revision";
+ major=.$current
+ versuffix=.$current.$revision
;;
freebsd-elf)
- major=".$current"
- versuffix=".$current"
+ func_arith $current - $age
+ major=.$func_arith_result
+ versuffix=$major.$age.$revision
;;
irix | nonstopux)
- if test "X$lt_irix_increment" = "Xno"; then
+ if test no = "$lt_irix_increment"; then
func_arith $current - $age
else
func_arith $current - $age + 1
@@ -7430,69 +8914,74 @@
nonstopux) verstring_prefix=nonstopux ;;
*) verstring_prefix=sgi ;;
esac
- verstring="$verstring_prefix$major.$revision"
+ verstring=$verstring_prefix$major.$revision
# Add in all the interfaces that we are compatible with.
loop=$revision
- while test "$loop" -ne 0; do
+ while test 0 -ne "$loop"; do
func_arith $revision - $loop
iface=$func_arith_result
func_arith $loop - 1
loop=$func_arith_result
- verstring="$verstring_prefix$major.$iface:$verstring"
+ verstring=$verstring_prefix$major.$iface:$verstring
done
- # Before this point, $major must not contain `.'.
+ # Before this point, $major must not contain '.'.
major=.$major
- versuffix="$major.$revision"
+ versuffix=$major.$revision
;;
linux) # correct to gnu/linux during the next big refactor
func_arith $current - $age
major=.$func_arith_result
- versuffix="$major.$age.$revision"
+ versuffix=$major.$age.$revision
;;
osf)
func_arith $current - $age
major=.$func_arith_result
- versuffix=".$current.$age.$revision"
- verstring="$current.$age.$revision"
+ versuffix=.$current.$age.$revision
+ verstring=$current.$age.$revision
# Add in all the interfaces that we are compatible with.
loop=$age
- while test "$loop" -ne 0; do
+ while test 0 -ne "$loop"; do
func_arith $current - $loop
iface=$func_arith_result
func_arith $loop - 1
loop=$func_arith_result
- verstring="$verstring:${iface}.0"
+ verstring=$verstring:$iface.0
done
# Make executables depend on our current version.
- func_append verstring ":${current}.0"
+ func_append verstring ":$current.0"
;;
qnx)
- major=".$current"
- versuffix=".$current"
+ major=.$current
+ versuffix=.$current
+ ;;
+
+ sco)
+ major=.$current
+ versuffix=.$current
;;
sunos)
- major=".$current"
- versuffix=".$current.$revision"
+ major=.$current
+ versuffix=.$current.$revision
;;
windows)
# Use '-' rather than '.', since we only want one
- # extension on DOS 8.3 filesystems.
+ # extension on DOS 8.3 file systems.
func_arith $current - $age
major=$func_arith_result
- versuffix="-$major"
+ versuffix=-$major
;;
*)
- func_fatal_configuration "unknown library version type \`$version_type'"
+ func_fatal_configuration "unknown library version type '$version_type'"
;;
esac
@@ -7506,42 +8995,45 @@
verstring=
;;
*)
- verstring="0.0"
+ verstring=0.0
;;
esac
- if test "$need_version" = no; then
+ if test no = "$need_version"; then
versuffix=
else
- versuffix=".0.0"
+ versuffix=.0.0
fi
fi
# Remove version info from name if versioning should be avoided
- if test "$avoid_version" = yes && test "$need_version" = no; then
+ if test yes,no = "$avoid_version,$need_version"; then
major=
versuffix=
- verstring=""
+ verstring=
fi
# Check to see if the archive will have undefined symbols.
- if test "$allow_undefined" = yes; then
- if test "$allow_undefined_flag" = unsupported; then
- func_warning "undefined symbols not allowed in $host shared libraries"
- build_libtool_libs=no
- build_old_libs=yes
+ if test yes = "$allow_undefined"; then
+ if test unsupported = "$allow_undefined_flag"; then
+ if test yes = "$build_old_libs"; then
+ func_warning "undefined symbols not allowed in $host shared libraries; building static only"
+ build_libtool_libs=no
+ else
+ func_fatal_error "can't build $host shared library unless -no-undefined is specified"
+ fi
fi
else
# Don't allow undefined symbols.
- allow_undefined_flag="$no_undefined_flag"
+ allow_undefined_flag=$no_undefined_flag
fi
fi
- func_generate_dlsyms "$libname" "$libname" "yes"
+ func_generate_dlsyms "$libname" "$libname" :
func_append libobjs " $symfileobj"
- test "X$libobjs" = "X " && libobjs=
+ test " " = "$libobjs" && libobjs=
- if test "$opt_mode" != relink; then
+ if test relink != "$opt_mode"; then
# Remove our outputs, but don't remove object files since they
# may have been created when compiling PIC objects.
removelist=
@@ -7550,8 +9042,8 @@
case $p in
*.$objext | *.gcno)
;;
- $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*)
- if test "X$precious_files_regex" != "X"; then
+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/$libname$release.*)
+ if test -n "$precious_files_regex"; then
if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1
then
continue
@@ -7567,11 +9059,11 @@
fi
# Now set the variables for building old libraries.
- if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then
+ if test yes = "$build_old_libs" && test convenience != "$build_libtool_libs"; then
func_append oldlibs " $output_objdir/$libname.$libext"
# Transform .lo files to .o files.
- oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
+ oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; $lo2o" | $NL2SP`
fi
# Eliminate all temporary directories.
@@ -7592,13 +9084,13 @@
*) func_append finalize_rpath " $libdir" ;;
esac
done
- if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then
+ if test yes != "$hardcode_into_libs" || test yes = "$build_old_libs"; then
dependency_libs="$temp_xrpath $dependency_libs"
fi
fi
# Make sure dlfiles contains only unique files that won't be dlpreopened
- old_dlfiles="$dlfiles"
+ old_dlfiles=$dlfiles
dlfiles=
for lib in $old_dlfiles; do
case " $dlprefiles $dlfiles " in
@@ -7608,7 +9100,7 @@
done
# Make sure dlprefiles contains only unique files
- old_dlprefiles="$dlprefiles"
+ old_dlprefiles=$dlprefiles
dlprefiles=
for lib in $old_dlprefiles; do
case "$dlprefiles " in
@@ -7617,7 +9109,7 @@
esac
done
- if test "$build_libtool_libs" = yes; then
+ if test yes = "$build_libtool_libs"; then
if test -n "$rpath"; then
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
@@ -7641,7 +9133,7 @@
;;
*)
# Add libc to deplibs on all other systems if necessary.
- if test "$build_libtool_need_lc" = "yes"; then
+ if test yes = "$build_libtool_need_lc"; then
func_append deplibs " -lc"
fi
;;
@@ -7657,9 +9149,9 @@
# I'm not sure if I'm treating the release correctly. I think
# release should show up in the -l (ie -lgmp5) so we don't want to
# add it in twice. Is that correct?
- release=""
- versuffix=""
- major=""
+ release=
+ versuffix=
+ major=
newdeplibs=
droppeddeps=no
case $deplibs_check_method in
@@ -7688,20 +9180,20 @@
-l*)
func_stripname -l '' "$i"
name=$func_stripname_result
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $i "*)
func_append newdeplibs " $i"
- i=""
+ i=
;;
esac
fi
- if test -n "$i" ; then
+ if test -n "$i"; then
libname=`eval "\\$ECHO \"$libname_spec\""`
deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
set dummy $deplib_matches; shift
deplib_match=$1
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
func_append newdeplibs " $i"
else
droppeddeps=yes
@@ -7731,20 +9223,20 @@
$opt_dry_run || $RM conftest
if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
ldd_output=`ldd conftest`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $i "*)
func_append newdeplibs " $i"
- i=""
+ i=
;;
esac
fi
- if test -n "$i" ; then
+ if test -n "$i"; then
libname=`eval "\\$ECHO \"$libname_spec\""`
deplib_matches=`eval "\\$ECHO \"$library_names_spec\""`
set dummy $deplib_matches; shift
deplib_match=$1
- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then
+ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0; then
func_append newdeplibs " $i"
else
droppeddeps=yes
@@ -7781,24 +9273,24 @@
-l*)
func_stripname -l '' "$a_deplib"
name=$func_stripname_result
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $a_deplib "*)
func_append newdeplibs " $a_deplib"
- a_deplib=""
+ a_deplib=
;;
esac
fi
- if test -n "$a_deplib" ; then
+ if test -n "$a_deplib"; then
libname=`eval "\\$ECHO \"$libname_spec\""`
if test -n "$file_magic_glob"; then
libnameglob=`func_echo_all "$libname" | $SED -e $file_magic_glob`
else
libnameglob=$libname
fi
- test "$want_nocaseglob" = yes && nocaseglob=`shopt -p nocaseglob`
+ test yes = "$want_nocaseglob" && nocaseglob=`shopt -p nocaseglob`
for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
- if test "$want_nocaseglob" = yes; then
+ if test yes = "$want_nocaseglob"; then
shopt -s nocaseglob
potential_libs=`ls $i/$libnameglob[.-]* 2>/dev/null`
$nocaseglob
@@ -7816,25 +9308,25 @@
# We might still enter an endless loop, since a link
# loop can be closed while we follow links,
# but so what?
- potlib="$potent_lib"
+ potlib=$potent_lib
while test -h "$potlib" 2>/dev/null; do
- potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
+ potliblink=`ls -ld $potlib | $SED 's/.* -> //'`
case $potliblink in
- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
- *) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
+ [\\/]* | [A-Za-z]:[\\/]*) potlib=$potliblink;;
+ *) potlib=`$ECHO "$potlib" | $SED 's|[^/]*$||'`"$potliblink";;
esac
done
if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
$SED -e 10q |
$EGREP "$file_magic_regex" > /dev/null; then
func_append newdeplibs " $a_deplib"
- a_deplib=""
+ a_deplib=
break 2
fi
done
done
fi
- if test -n "$a_deplib" ; then
+ if test -n "$a_deplib"; then
droppeddeps=yes
echo
$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
@@ -7842,7 +9334,7 @@
echo "*** you link to this library. But I can only do this if you have a"
echo "*** shared version of the library, which you do not appear to have"
echo "*** because I did check the linker path looking for a file starting"
- if test -z "$potlib" ; then
+ if test -z "$potlib"; then
$ECHO "*** with $libname but no candidates were found. (...for file magic test)"
else
$ECHO "*** with $libname and none of the candidates passed a file format test"
@@ -7865,30 +9357,30 @@
-l*)
func_stripname -l '' "$a_deplib"
name=$func_stripname_result
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
case " $predeps $postdeps " in
*" $a_deplib "*)
func_append newdeplibs " $a_deplib"
- a_deplib=""
+ a_deplib=
;;
esac
fi
- if test -n "$a_deplib" ; then
+ if test -n "$a_deplib"; then
libname=`eval "\\$ECHO \"$libname_spec\""`
for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do
potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
for potent_lib in $potential_libs; do
- potlib="$potent_lib" # see symlink-check above in file_magic test
+ potlib=$potent_lib # see symlink-check above in file_magic test
if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
$EGREP "$match_pattern_regex" > /dev/null; then
func_append newdeplibs " $a_deplib"
- a_deplib=""
+ a_deplib=
break 2
fi
done
done
fi
- if test -n "$a_deplib" ; then
+ if test -n "$a_deplib"; then
droppeddeps=yes
echo
$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
@@ -7896,7 +9388,7 @@
echo "*** you link to this library. But I can only do this if you have a"
echo "*** shared version of the library, which you do not appear to have"
echo "*** because I did check the linker path looking for a file starting"
- if test -z "$potlib" ; then
+ if test -z "$potlib"; then
$ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
else
$ECHO "*** with $libname and none of the candidates passed a file format test"
@@ -7912,18 +9404,18 @@
done # Gone through all deplibs.
;;
none | unknown | *)
- newdeplibs=""
+ newdeplibs=
tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
- for i in $predeps $postdeps ; do
+ if test yes = "$allow_libtool_libs_with_static_runtimes"; then
+ for i in $predeps $postdeps; do
# can't use Xsed below, because $i might contain '/'
- tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
+ tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s|$i||"`
done
fi
case $tmp_deplibs in
*[!\ \ ]*)
echo
- if test "X$deplibs_check_method" = "Xnone"; then
+ if test none = "$deplibs_check_method"; then
echo "*** Warning: inter-library dependencies are not supported in this platform."
else
echo "*** Warning: inter-library dependencies are not known to be supported."
@@ -7947,8 +9439,8 @@
;;
esac
- if test "$droppeddeps" = yes; then
- if test "$module" = yes; then
+ if test yes = "$droppeddeps"; then
+ if test yes = "$module"; then
echo
echo "*** Warning: libtool could not satisfy all declared inter-library"
$ECHO "*** dependencies of module $libname. Therefore, libtool will create"
@@ -7957,12 +9449,12 @@
if test -z "$global_symbol_pipe"; then
echo
echo "*** However, this would only work if libtool was able to extract symbol"
- echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+ echo "*** lists from a program, using 'nm' or equivalent, but libtool could"
echo "*** not find such a program. So, this module is probably useless."
- echo "*** \`nm' from GNU binutils and a full rebuild may help."
+ echo "*** 'nm' from GNU binutils and a full rebuild may help."
fi
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
+ if test no = "$build_old_libs"; then
+ oldlibs=$output_objdir/$libname.$libext
build_libtool_libs=module
build_old_libs=yes
else
@@ -7973,14 +9465,14 @@
echo "*** automatically added whenever a program is linked with this library"
echo "*** or is declared to -dlopen it."
- if test "$allow_undefined" = no; then
+ if test no = "$allow_undefined"; then
echo
echo "*** Since this library must not contain undefined symbols,"
echo "*** because either the platform does not support them or"
echo "*** it was explicitly requested with -no-undefined,"
echo "*** libtool will only create a static version of it."
- if test "$build_old_libs" = no; then
- oldlibs="$output_objdir/$libname.$libext"
+ if test no = "$build_old_libs"; then
+ oldlibs=$output_objdir/$libname.$libext
build_libtool_libs=module
build_old_libs=yes
else
@@ -8026,7 +9518,7 @@
*) func_append new_libs " $deplib" ;;
esac
done
- deplibs="$new_libs"
+ deplibs=$new_libs
# All the library-specific variables (install_libdir is set above).
library_names=
@@ -8034,25 +9526,25 @@
dlname=
# Test again, we may have decided not to build it any more
- if test "$build_libtool_libs" = yes; then
- # Remove ${wl} instances when linking with ld.
+ if test yes = "$build_libtool_libs"; then
+ # Remove $wl instances when linking with ld.
# FIXME: should test the right _cmds variable.
case $archive_cmds in
*\$LD\ *) wl= ;;
esac
- if test "$hardcode_into_libs" = yes; then
+ if test yes = "$hardcode_into_libs"; then
# Hardcode the library paths
hardcode_libdirs=
dep_rpath=
- rpath="$finalize_rpath"
- test "$opt_mode" != relink && rpath="$compile_rpath$rpath"
+ rpath=$finalize_rpath
+ test relink = "$opt_mode" || rpath=$compile_rpath$rpath
for libdir in $rpath; do
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
func_replace_sysroot "$libdir"
libdir=$func_replace_sysroot_result
if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
+ hardcode_libdirs=$libdir
else
# Just accumulate the unique libdirs.
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
@@ -8077,7 +9569,7 @@
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
+ libdir=$hardcode_libdirs
eval "dep_rpath=\"$hardcode_libdir_flag_spec\""
fi
if test -n "$runpath_var" && test -n "$perm_rpath"; then
@@ -8091,8 +9583,8 @@
test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs"
fi
- shlibpath="$finalize_shlibpath"
- test "$opt_mode" != relink && shlibpath="$compile_shlibpath$shlibpath"
+ shlibpath=$finalize_shlibpath
+ test relink = "$opt_mode" || shlibpath=$compile_shlibpath$shlibpath
if test -n "$shlibpath"; then
eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var"
fi
@@ -8102,19 +9594,19 @@
eval library_names=\"$library_names_spec\"
set dummy $library_names
shift
- realname="$1"
+ realname=$1
shift
if test -n "$soname_spec"; then
eval soname=\"$soname_spec\"
else
- soname="$realname"
+ soname=$realname
fi
if test -z "$dlname"; then
dlname=$soname
fi
- lib="$output_objdir/$realname"
+ lib=$output_objdir/$realname
linknames=
for link
do
@@ -8128,7 +9620,7 @@
delfiles=
if test -n "$export_symbols" && test -n "$include_expsyms"; then
$opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp"
- export_symbols="$output_objdir/$libname.uexp"
+ export_symbols=$output_objdir/$libname.uexp
func_append delfiles " $export_symbols"
fi
@@ -8137,31 +9629,31 @@
cygwin* | mingw* | cegcc*)
if test -n "$export_symbols" && test -z "$export_symbols_regex"; then
# exporting using user supplied symfile
- if test "x`$SED 1q $export_symbols`" != xEXPORTS; then
+ func_dll_def_p "$export_symbols" || {
# and it's NOT already a .def file. Must figure out
# which of the given symbols are data symbols and tag
# them as such. So, trigger use of export_symbols_cmds.
# export_symbols gets reassigned inside the "prepare
# the list of exported symbols" if statement, so the
# include_expsyms logic still works.
- orig_export_symbols="$export_symbols"
+ orig_export_symbols=$export_symbols
export_symbols=
always_export_symbols=yes
- fi
+ }
fi
;;
esac
# Prepare the list of exported symbols
if test -z "$export_symbols"; then
- if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then
- func_verbose "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
+ if test yes = "$always_export_symbols" || test -n "$export_symbols_regex"; then
+ func_verbose "generating symbol list for '$libname.la'"
+ export_symbols=$output_objdir/$libname.exp
$opt_dry_run || $RM $export_symbols
cmds=$export_symbols_cmds
- save_ifs="$IFS"; IFS='~'
+ save_ifs=$IFS; IFS='~'
for cmd1 in $cmds; do
- IFS="$save_ifs"
+ IFS=$save_ifs
# Take the normal branch if the nm_file_list_spec branch
# doesn't work or if tool conversion is not needed.
case $nm_file_list_spec~$to_tool_file_cmd in
@@ -8175,7 +9667,7 @@
try_normal_branch=no
;;
esac
- if test "$try_normal_branch" = yes \
+ if test yes = "$try_normal_branch" \
&& { test "$len" -lt "$max_cmd_len" \
|| test "$max_cmd_len" -le -1; }
then
@@ -8186,7 +9678,7 @@
output_la=$func_basename_result
save_libobjs=$libobjs
save_output=$output
- output=${output_objdir}/${output_la}.nm
+ output=$output_objdir/$output_la.nm
func_to_tool_file "$output"
libobjs=$nm_file_list_spec$func_to_tool_file_result
func_append delfiles " $output"
@@ -8209,8 +9701,8 @@
break
fi
done
- IFS="$save_ifs"
- if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then
+ IFS=$save_ifs
+ if test -n "$export_symbols_regex" && test : != "$skipped_export"; then
func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
func_show_eval '$MV "${export_symbols}T" "$export_symbols"'
fi
@@ -8218,16 +9710,16 @@
fi
if test -n "$export_symbols" && test -n "$include_expsyms"; then
- tmp_export_symbols="$export_symbols"
- test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ tmp_export_symbols=$export_symbols
+ test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
$opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
fi
- if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
+ if test : != "$skipped_export" && test -n "$orig_export_symbols"; then
# The given exports_symbols file has to be filtered, so filter it.
- func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
# FIXME: $output_objdir/$libname.filter potentially contains lots of
- # 's' commands which not all seds can handle. GNU sed should be fine
+ # 's' commands, which not all seds can handle. GNU sed should be fine
# though. Also, the filter scales superlinearly with the number of
# global variables. join(1) would be nice here, but unfortunately
# isn't a blessed tool.
@@ -8246,11 +9738,11 @@
;;
esac
done
- deplibs="$tmp_deplibs"
+ deplibs=$tmp_deplibs
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec" &&
- test "$compiler_needs_object" = yes &&
+ test yes = "$compiler_needs_object" &&
test -z "$libobjs"; then
# extract the archives, so we have objects to list.
# TODO: could optimize this to just extract one archive.
@@ -8261,7 +9753,7 @@
eval libobjs=\"\$libobjs $whole_archive_flag_spec\"
test "X$libobjs" = "X " && libobjs=
else
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $convenience
@@ -8270,18 +9762,18 @@
fi
fi
- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then
+ if test yes = "$thread_safe" && test -n "$thread_safe_flag_spec"; then
eval flag=\"$thread_safe_flag_spec\"
func_append linker_flags " $flag"
fi
# Make a backup of the uninstalled library when relinking
- if test "$opt_mode" = relink; then
+ if test relink = "$opt_mode"; then
$opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $?
fi
# Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
+ if test yes = "$module" && test -n "$module_cmds"; then
if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
eval test_cmds=\"$module_expsym_cmds\"
cmds=$module_expsym_cmds
@@ -8299,7 +9791,7 @@
fi
fi
- if test "X$skipped_export" != "X:" &&
+ if test : != "$skipped_export" &&
func_len " $test_cmds" &&
len=$func_len_result &&
test "$len" -lt "$max_cmd_len" || test "$max_cmd_len" -le -1; then
@@ -8332,8 +9824,8 @@
last_robj=
k=1
- if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
- output=${output_objdir}/${output_la}.lnkscript
+ if test -n "$save_libobjs" && test : != "$skipped_export" && test yes = "$with_gnu_ld"; then
+ output=$output_objdir/$output_la.lnkscript
func_verbose "creating GNU ld script: $output"
echo 'INPUT (' > $output
for obj in $save_libobjs
@@ -8345,14 +9837,14 @@
func_append delfiles " $output"
func_to_tool_file "$output"
output=$func_to_tool_file_result
- elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
- output=${output_objdir}/${output_la}.lnk
+ elif test -n "$save_libobjs" && test : != "$skipped_export" && test -n "$file_list_spec"; then
+ output=$output_objdir/$output_la.lnk
func_verbose "creating linker input file list: $output"
: > $output
set x $save_libobjs
shift
firstobj=
- if test "$compiler_needs_object" = yes; then
+ if test yes = "$compiler_needs_object"; then
firstobj="$1 "
shift
fi
@@ -8367,7 +9859,7 @@
else
if test -n "$save_libobjs"; then
func_verbose "creating reloadable object files..."
- output=$output_objdir/$output_la-${k}.$objext
+ output=$output_objdir/$output_la-$k.$objext
eval test_cmds=\"$reload_cmds\"
func_len " $test_cmds"
len0=$func_len_result
@@ -8379,13 +9871,13 @@
func_len " $obj"
func_arith $len + $func_len_result
len=$func_arith_result
- if test "X$objlist" = X ||
+ if test -z "$objlist" ||
test "$len" -lt "$max_cmd_len"; then
func_append objlist " $obj"
else
# The command $test_cmds is almost too long, add a
# command to the queue.
- if test "$k" -eq 1 ; then
+ if test 1 -eq "$k"; then
# The first file doesn't have a previous command to add.
reload_objs=$objlist
eval concat_cmds=\"$reload_cmds\"
@@ -8395,10 +9887,10 @@
reload_objs="$objlist $last_robj"
eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
fi
- last_robj=$output_objdir/$output_la-${k}.$objext
+ last_robj=$output_objdir/$output_la-$k.$objext
func_arith $k + 1
k=$func_arith_result
- output=$output_objdir/$output_la-${k}.$objext
+ output=$output_objdir/$output_la-$k.$objext
objlist=" $obj"
func_len " $last_robj"
func_arith $len0 + $func_len_result
@@ -8410,9 +9902,9 @@
# files will link in the last one created.
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
reload_objs="$objlist $last_robj"
- eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
+ eval concat_cmds=\"\$concat_cmds$reload_cmds\"
if test -n "$last_robj"; then
- eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
+ eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
fi
func_append delfiles " $output"
@@ -8420,9 +9912,9 @@
output=
fi
- if ${skipped_export-false}; then
- func_verbose "generating symbol list for \`$libname.la'"
- export_symbols="$output_objdir/$libname.exp"
+ ${skipped_export-false} && {
+ func_verbose "generating symbol list for '$libname.la'"
+ export_symbols=$output_objdir/$libname.exp
$opt_dry_run || $RM $export_symbols
libobjs=$output
# Append the command to create the export file.
@@ -8431,16 +9923,16 @@
if test -n "$last_robj"; then
eval concat_cmds=\"\$concat_cmds~\$RM $last_robj\"
fi
- fi
+ }
test -n "$save_libobjs" &&
func_verbose "creating a temporary reloadable object file: $output"
# Loop through the commands generated above and execute them.
- save_ifs="$IFS"; IFS='~'
+ save_ifs=$IFS; IFS='~'
for cmd in $concat_cmds; do
- IFS="$save_ifs"
- $opt_silent || {
+ IFS=$save_ifs
+ $opt_quiet || {
func_quote_for_expand "$cmd"
eval "func_echo $func_quote_for_expand_result"
}
@@ -8448,7 +9940,7 @@
lt_exit=$?
# Restore the uninstalled library and exit
- if test "$opt_mode" = relink; then
+ if test relink = "$opt_mode"; then
( cd "$output_objdir" && \
$RM "${realname}T" && \
$MV "${realname}U" "$realname" )
@@ -8457,7 +9949,7 @@
exit $lt_exit
}
done
- IFS="$save_ifs"
+ IFS=$save_ifs
if test -n "$export_symbols_regex" && ${skipped_export-false}; then
func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"'
@@ -8465,18 +9957,18 @@
fi
fi
- if ${skipped_export-false}; then
+ ${skipped_export-false} && {
if test -n "$export_symbols" && test -n "$include_expsyms"; then
- tmp_export_symbols="$export_symbols"
- test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
+ tmp_export_symbols=$export_symbols
+ test -n "$orig_export_symbols" && tmp_export_symbols=$orig_export_symbols
$opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
fi
if test -n "$orig_export_symbols"; then
# The given exports_symbols file has to be filtered, so filter it.
- func_verbose "filter symbol list for \`$libname.la' to tag DATA exports"
+ func_verbose "filter symbol list for '$libname.la' to tag DATA exports"
# FIXME: $output_objdir/$libname.filter potentially contains lots of
- # 's' commands which not all seds can handle. GNU sed should be fine
+ # 's' commands, which not all seds can handle. GNU sed should be fine
# though. Also, the filter scales superlinearly with the number of
# global variables. join(1) would be nice here, but unfortunately
# isn't a blessed tool.
@@ -8485,7 +9977,7 @@
export_symbols=$output_objdir/$libname.def
$opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols
fi
- fi
+ }
libobjs=$output
# Restore the value of output.
@@ -8499,7 +9991,7 @@
# value of $libobjs for piecewise linking.
# Do each of the archive commands.
- if test "$module" = yes && test -n "$module_cmds" ; then
+ if test yes = "$module" && test -n "$module_cmds"; then
if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then
cmds=$module_expsym_cmds
else
@@ -8521,7 +10013,7 @@
# Add any objects from preloaded convenience libraries
if test -n "$dlprefiles"; then
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $dlprefiles
@@ -8529,11 +10021,12 @@
test "X$libobjs" = "X " && libobjs=
fi
- save_ifs="$IFS"; IFS='~'
+ save_ifs=$IFS; IFS='~'
for cmd in $cmds; do
- IFS="$save_ifs"
+ IFS=$sp$nl
eval cmd=\"$cmd\"
- $opt_silent || {
+ IFS=$save_ifs
+ $opt_quiet || {
func_quote_for_expand "$cmd"
eval "func_echo $func_quote_for_expand_result"
}
@@ -8541,7 +10034,7 @@
lt_exit=$?
# Restore the uninstalled library and exit
- if test "$opt_mode" = relink; then
+ if test relink = "$opt_mode"; then
( cd "$output_objdir" && \
$RM "${realname}T" && \
$MV "${realname}U" "$realname" )
@@ -8550,10 +10043,10 @@
exit $lt_exit
}
done
- IFS="$save_ifs"
+ IFS=$save_ifs
# Restore the uninstalled library and exit
- if test "$opt_mode" = relink; then
+ if test relink = "$opt_mode"; then
$opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $?
if test -n "$convenience"; then
@@ -8573,39 +10066,39 @@
done
# If -module or -export-dynamic was specified, set the dlname.
- if test "$module" = yes || test "$export_dynamic" = yes; then
+ if test yes = "$module" || test yes = "$export_dynamic"; then
# On all known operating systems, these are identical.
- dlname="$soname"
+ dlname=$soname
fi
fi
;;
obj)
- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then
- func_warning "\`-dlopen' is ignored for objects"
+ if test -n "$dlfiles$dlprefiles" || test no != "$dlself"; then
+ func_warning "'-dlopen' is ignored for objects"
fi
case " $deplibs" in
*\ -l* | *\ -L*)
- func_warning "\`-l' and \`-L' are ignored for objects" ;;
+ func_warning "'-l' and '-L' are ignored for objects" ;;
esac
test -n "$rpath" && \
- func_warning "\`-rpath' is ignored for objects"
+ func_warning "'-rpath' is ignored for objects"
test -n "$xrpath" && \
- func_warning "\`-R' is ignored for objects"
+ func_warning "'-R' is ignored for objects"
test -n "$vinfo" && \
- func_warning "\`-version-info' is ignored for objects"
+ func_warning "'-version-info' is ignored for objects"
test -n "$release" && \
- func_warning "\`-release' is ignored for objects"
+ func_warning "'-release' is ignored for objects"
case $output in
*.lo)
test -n "$objs$old_deplibs" && \
- func_fatal_error "cannot build library object \`$output' from non-libtool objects"
+ func_fatal_error "cannot build library object '$output' from non-libtool objects"
libobj=$output
func_lo2o "$libobj"
@@ -8613,7 +10106,7 @@
;;
*)
libobj=
- obj="$output"
+ obj=$output
;;
esac
@@ -8626,17 +10119,19 @@
# the extraction.
reload_conv_objs=
gentop=
- # reload_cmds runs $LD directly, so let us get rid of
- # -Wl from whole_archive_flag_spec and hope we can get by with
- # turning comma into space..
- wl=
-
+ # if reload_cmds runs $LD directly, get rid of -Wl from
+ # whole_archive_flag_spec and hope we can get by with turning comma
+ # into space.
+ case $reload_cmds in
+ *\$LD[\ \$]*) wl= ;;
+ esac
if test -n "$convenience"; then
if test -n "$whole_archive_flag_spec"; then
eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
- reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+ test -n "$wl" || tmp_whole_archive_flags=`$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
+ reload_conv_objs=$reload_objs\ $tmp_whole_archive_flags
else
- gentop="$output_objdir/${obj}x"
+ gentop=$output_objdir/${obj}x
func_append generated " $gentop"
func_extract_archives $gentop $convenience
@@ -8645,12 +10140,12 @@
fi
# If we're not building shared, we need to use non_pic_objs
- test "$build_libtool_libs" != yes && libobjs="$non_pic_objects"
+ test yes = "$build_libtool_libs" || libobjs=$non_pic_objects
# Create the old-style object.
- reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+ reload_objs=$objs$old_deplibs' '`$ECHO "$libobjs" | $SP2NL | $SED "/\.$libext$/d; /\.lib$/d; $lo2o" | $NL2SP`' '$reload_conv_objs
- output="$obj"
+ output=$obj
func_execute_cmds "$reload_cmds" 'exit $?'
# Exit if we aren't doing a library object file.
@@ -8662,7 +10157,7 @@
exit $EXIT_SUCCESS
fi
- if test "$build_libtool_libs" != yes; then
+ test yes = "$build_libtool_libs" || {
if test -n "$gentop"; then
func_show_eval '${RM}r "$gentop"'
fi
@@ -8672,12 +10167,12 @@
# $show "echo timestamp > $libobj"
# $opt_dry_run || eval "echo timestamp > $libobj" || exit $?
exit $EXIT_SUCCESS
- fi
+ }
- if test -n "$pic_flag" || test "$pic_mode" != default; then
+ if test -n "$pic_flag" || test default != "$pic_mode"; then
# Only do commands if we really have different PIC objects.
reload_objs="$libobjs $reload_conv_objs"
- output="$libobj"
+ output=$libobj
func_execute_cmds "$reload_cmds" 'exit $?'
fi
@@ -8694,16 +10189,14 @@
output=$func_stripname_result.exe;;
esac
test -n "$vinfo" && \
- func_warning "\`-version-info' is ignored for programs"
+ func_warning "'-version-info' is ignored for programs"
test -n "$release" && \
- func_warning "\`-release' is ignored for programs"
+ func_warning "'-release' is ignored for programs"
- test "$preload" = yes \
- && test "$dlopen_support" = unknown \
- && test "$dlopen_self" = unknown \
- && test "$dlopen_self_static" = unknown && \
- func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support."
+ $preload \
+ && test unknown,unknown,unknown = "$dlopen_support,$dlopen_self,$dlopen_self_static" \
+ && func_warning "'LT_INIT([dlopen])' not used. Assuming no dlopen support."
case $host in
*-*-rhapsody* | *-*-darwin1.[012])
@@ -8717,11 +10210,11 @@
*-*-darwin*)
# Don't allow lazy linking, it breaks C++ global constructors
# But is supposedly fixed on 10.4 or later (yay!).
- if test "$tagname" = CXX ; then
+ if test CXX = "$tagname"; then
case ${MACOSX_DEPLOYMENT_TARGET-10.0} in
10.[0123])
- func_append compile_command " ${wl}-bind_at_load"
- func_append finalize_command " ${wl}-bind_at_load"
+ func_append compile_command " $wl-bind_at_load"
+ func_append finalize_command " $wl-bind_at_load"
;;
esac
fi
@@ -8757,7 +10250,7 @@
*) func_append new_libs " $deplib" ;;
esac
done
- compile_deplibs="$new_libs"
+ compile_deplibs=$new_libs
func_append compile_command " $compile_deplibs"
@@ -8781,7 +10274,7 @@
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
+ hardcode_libdirs=$libdir
else
# Just accumulate the unique libdirs.
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
@@ -8804,7 +10297,7 @@
fi
case $host in
*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
- testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'`
+ testbindir=`$ECHO "$libdir" | $SED -e 's*/lib$*/bin*'`
case :$dllsearchpath: in
*":$libdir:"*) ;;
::) dllsearchpath=$libdir;;
@@ -8821,10 +10314,10 @@
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
+ libdir=$hardcode_libdirs
eval rpath=\" $hardcode_libdir_flag_spec\"
fi
- compile_rpath="$rpath"
+ compile_rpath=$rpath
rpath=
hardcode_libdirs=
@@ -8832,7 +10325,7 @@
if test -n "$hardcode_libdir_flag_spec"; then
if test -n "$hardcode_libdir_separator"; then
if test -z "$hardcode_libdirs"; then
- hardcode_libdirs="$libdir"
+ hardcode_libdirs=$libdir
else
# Just accumulate the unique libdirs.
case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in
@@ -8857,45 +10350,43 @@
# Substitute the hardcoded libdirs into the rpath.
if test -n "$hardcode_libdir_separator" &&
test -n "$hardcode_libdirs"; then
- libdir="$hardcode_libdirs"
+ libdir=$hardcode_libdirs
eval rpath=\" $hardcode_libdir_flag_spec\"
fi
- finalize_rpath="$rpath"
+ finalize_rpath=$rpath
- if test -n "$libobjs" && test "$build_old_libs" = yes; then
+ if test -n "$libobjs" && test yes = "$build_old_libs"; then
# Transform all the library objects into standard objects.
compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
fi
- func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
+ func_generate_dlsyms "$outputname" "@PROGRAM@" false
# template prelinking step
if test -n "$prelink_cmds"; then
func_execute_cmds "$prelink_cmds" 'exit $?'
fi
- wrappers_required=yes
+ wrappers_required=:
case $host in
*cegcc* | *mingw32ce*)
# Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
- wrappers_required=no
+ wrappers_required=false
;;
*cygwin* | *mingw* )
- if test "$build_libtool_libs" != yes; then
- wrappers_required=no
- fi
+ test yes = "$build_libtool_libs" || wrappers_required=false
;;
*)
- if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
- wrappers_required=no
+ if test no = "$need_relink" || test yes != "$build_libtool_libs"; then
+ wrappers_required=false
fi
;;
esac
- if test "$wrappers_required" = no; then
+ $wrappers_required || {
# Replace the output file specification.
compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
- link_command="$compile_command$compile_rpath"
+ link_command=$compile_command$compile_rpath
# We have no uninstalled library dependencies, so finalize right now.
exit_status=0
@@ -8908,12 +10399,12 @@
fi
# Delete the generated files.
- if test -f "$output_objdir/${outputname}S.${objext}"; then
- func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"'
+ if test -f "$output_objdir/${outputname}S.$objext"; then
+ func_show_eval '$RM "$output_objdir/${outputname}S.$objext"'
fi
exit $exit_status
- fi
+ }
if test -n "$compile_shlibpath$finalize_shlibpath"; then
compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command"
@@ -8943,9 +10434,9 @@
fi
fi
- if test "$no_install" = yes; then
+ if test yes = "$no_install"; then
# We don't need to create a wrapper script.
- link_command="$compile_var$compile_command$compile_rpath"
+ link_command=$compile_var$compile_command$compile_rpath
# Replace the output file specification.
link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
# Delete the old output file.
@@ -8962,27 +10453,28 @@
exit $EXIT_SUCCESS
fi
- if test "$hardcode_action" = relink; then
- # Fast installation is not supported
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
+ case $hardcode_action,$fast_install in
+ relink,*)
+ # Fast installation is not supported
+ link_command=$compile_var$compile_command$compile_rpath
+ relink_command=$finalize_var$finalize_command$finalize_rpath
- func_warning "this platform does not like uninstalled shared libraries"
- func_warning "\`$output' will be relinked during installation"
- else
- if test "$fast_install" != no; then
- link_command="$finalize_var$compile_command$finalize_rpath"
- if test "$fast_install" = yes; then
- relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
- else
- # fast_install is set to needless
- relink_command=
- fi
- else
- link_command="$compile_var$compile_command$compile_rpath"
- relink_command="$finalize_var$finalize_command$finalize_rpath"
- fi
- fi
+ func_warning "this platform does not like uninstalled shared libraries"
+ func_warning "'$output' will be relinked during installation"
+ ;;
+ *,yes)
+ link_command=$finalize_var$compile_command$finalize_rpath
+ relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
+ ;;
+ *,no)
+ link_command=$compile_var$compile_command$compile_rpath
+ relink_command=$finalize_var$finalize_command$finalize_rpath
+ ;;
+ *,needless)
+ link_command=$finalize_var$compile_command$finalize_rpath
+ relink_command=
+ ;;
+ esac
# Replace the output file specification.
link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
@@ -9039,8 +10531,8 @@
func_dirname_and_basename "$output" "" "."
output_name=$func_basename_result
output_path=$func_dirname_result
- cwrappersource="$output_path/$objdir/lt-$output_name.c"
- cwrapper="$output_path/$output_name.exe"
+ cwrappersource=$output_path/$objdir/lt-$output_name.c
+ cwrapper=$output_path/$output_name.exe
$RM $cwrappersource $cwrapper
trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15
@@ -9061,7 +10553,7 @@
trap "$RM $func_ltwrapper_scriptname_result; exit $EXIT_FAILURE" 1 2 15
$opt_dry_run || {
# note: this script will not be executed, so do not chmod.
- if test "x$build" = "x$host" ; then
+ if test "x$build" = "x$host"; then
$cwrapper --lt-dump-script > $func_ltwrapper_scriptname_result
else
func_emit_wrapper no > $func_ltwrapper_scriptname_result
@@ -9084,25 +10576,27 @@
# See if we need to build an old-fashioned archive.
for oldlib in $oldlibs; do
- if test "$build_libtool_libs" = convenience; then
- oldobjs="$libobjs_save $symfileobj"
- addlibs="$convenience"
- build_libtool_libs=no
- else
- if test "$build_libtool_libs" = module; then
- oldobjs="$libobjs_save"
+ case $build_libtool_libs in
+ convenience)
+ oldobjs="$libobjs_save $symfileobj"
+ addlibs=$convenience
build_libtool_libs=no
- else
+ ;;
+ module)
+ oldobjs=$libobjs_save
+ addlibs=$old_convenience
+ build_libtool_libs=no
+ ;;
+ *)
oldobjs="$old_deplibs $non_pic_objects"
- if test "$preload" = yes && test -f "$symfileobj"; then
- func_append oldobjs " $symfileobj"
- fi
- fi
- addlibs="$old_convenience"
- fi
+ $preload && test -f "$symfileobj" \
+ && func_append oldobjs " $symfileobj"
+ addlibs=$old_convenience
+ ;;
+ esac
if test -n "$addlibs"; then
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $addlibs
@@ -9110,13 +10604,13 @@
fi
# Do each command in the archive commands.
- if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then
+ if test -n "$old_archive_from_new_cmds" && test yes = "$build_libtool_libs"; then
cmds=$old_archive_from_new_cmds
else
# Add any objects from preloaded convenience libraries
if test -n "$dlprefiles"; then
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_extract_archives $gentop $dlprefiles
@@ -9137,7 +10631,7 @@
:
else
echo "copying selected object files to avoid basename conflicts..."
- gentop="$output_objdir/${outputname}x"
+ gentop=$output_objdir/${outputname}x
func_append generated " $gentop"
func_mkdir_p "$gentop"
save_oldobjs=$oldobjs
@@ -9146,7 +10640,7 @@
for obj in $save_oldobjs
do
func_basename "$obj"
- objbase="$func_basename_result"
+ objbase=$func_basename_result
case " $oldobjs " in
" ") oldobjs=$obj ;;
*[\ /]"$objbase "*)
@@ -9215,18 +10709,18 @@
else
# the above command should be used before it gets too long
oldobjs=$objlist
- if test "$obj" = "$last_oldobj" ; then
+ if test "$obj" = "$last_oldobj"; then
RANLIB=$save_RANLIB
fi
test -z "$concat_cmds" || concat_cmds=$concat_cmds~
- eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\"
+ eval concat_cmds=\"\$concat_cmds$old_archive_cmds\"
objlist=
len=$len0
fi
done
RANLIB=$save_RANLIB
oldobjs=$objlist
- if test "X$oldobjs" = "X" ; then
+ if test -z "$oldobjs"; then
eval cmds=\"\$concat_cmds\"
else
eval cmds=\"\$concat_cmds~\$old_archive_cmds\"
@@ -9243,7 +10737,7 @@
case $output in
*.la)
old_library=
- test "$build_old_libs" = yes && old_library="$libname.$libext"
+ test yes = "$build_old_libs" && old_library=$libname.$libext
func_verbose "creating $output"
# Preserve any variables that may affect compiler behavior
@@ -9258,31 +10752,31 @@
fi
done
# Quote the link command for shipping.
- relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+ relink_command="(cd `pwd`; $SHELL \"$progpath\" $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
- if test "$hardcode_automatic" = yes ; then
+ if test yes = "$hardcode_automatic"; then
relink_command=
fi
# Only create the output if not a dry run.
$opt_dry_run || {
for installed in no yes; do
- if test "$installed" = yes; then
+ if test yes = "$installed"; then
if test -z "$install_libdir"; then
break
fi
- output="$output_objdir/$outputname"i
+ output=$output_objdir/${outputname}i
# Replace all uninstalled libtool libraries with the installed ones
newdependency_libs=
for deplib in $dependency_libs; do
case $deplib in
*.la)
func_basename "$deplib"
- name="$func_basename_result"
+ name=$func_basename_result
func_resolve_sysroot "$deplib"
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $func_resolve_sysroot_result`
test -z "$libdir" && \
- func_fatal_error "\`$deplib' is not a valid libtool archive"
+ func_fatal_error "'$deplib' is not a valid libtool archive"
func_append newdependency_libs " ${lt_sysroot:+=}$libdir/$name"
;;
-L*)
@@ -9298,23 +10792,23 @@
*) func_append newdependency_libs " $deplib" ;;
esac
done
- dependency_libs="$newdependency_libs"
+ dependency_libs=$newdependency_libs
newdlfiles=
for lib in $dlfiles; do
case $lib in
*.la)
func_basename "$lib"
- name="$func_basename_result"
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ name=$func_basename_result
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
test -z "$libdir" && \
- func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_fatal_error "'$lib' is not a valid libtool archive"
func_append newdlfiles " ${lt_sysroot:+=}$libdir/$name"
;;
*) func_append newdlfiles " $lib" ;;
esac
done
- dlfiles="$newdlfiles"
+ dlfiles=$newdlfiles
newdlprefiles=
for lib in $dlprefiles; do
case $lib in
@@ -9324,34 +10818,34 @@
# didn't already link the preopened objects directly into
# the library:
func_basename "$lib"
- name="$func_basename_result"
- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
+ name=$func_basename_result
+ eval libdir=`$SED -n -e 's/^libdir=\(.*\)$/\1/p' $lib`
test -z "$libdir" && \
- func_fatal_error "\`$lib' is not a valid libtool archive"
+ func_fatal_error "'$lib' is not a valid libtool archive"
func_append newdlprefiles " ${lt_sysroot:+=}$libdir/$name"
;;
esac
done
- dlprefiles="$newdlprefiles"
+ dlprefiles=$newdlprefiles
else
newdlfiles=
for lib in $dlfiles; do
case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
*) abs=`pwd`"/$lib" ;;
esac
func_append newdlfiles " $abs"
done
- dlfiles="$newdlfiles"
+ dlfiles=$newdlfiles
newdlprefiles=
for lib in $dlprefiles; do
case $lib in
- [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;;
+ [\\/]* | [A-Za-z]:[\\/]*) abs=$lib ;;
*) abs=`pwd`"/$lib" ;;
esac
func_append newdlprefiles " $abs"
done
- dlprefiles="$newdlprefiles"
+ dlprefiles=$newdlprefiles
fi
$RM $output
# place dlname in correct position for cygwin
@@ -9367,10 +10861,9 @@
case $host,$output,$installed,$module,$dlname in
*cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
# If a -bindir argument was supplied, place the dll there.
- if test "x$bindir" != x ;
- then
+ if test -n "$bindir"; then
func_relative_path "$install_libdir" "$bindir"
- tdlname=$func_relative_path_result$dlname
+ tdlname=$func_relative_path_result/$dlname
else
# Otherwise fall back on heuristic.
tdlname=../bin/$dlname
@@ -9379,7 +10872,7 @@
esac
$ECHO > $output "\
# $outputname - a libtool library file
-# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION
+# Generated by $PROGRAM (GNU $PACKAGE) $VERSION
#
# Please DO NOT delete this file!
# It is necessary for linking the library.
@@ -9393,7 +10886,7 @@
# The name of the static archive.
old_library='$old_library'
-# Linker flags that can not go in dependency_libs.
+# Linker flags that cannot go in dependency_libs.
inherited_linker_flags='$new_inherited_linker_flags'
# Libraries that this one depends upon.
@@ -9419,7 +10912,7 @@
# Directory that this library needs to be installed in:
libdir='$install_libdir'"
- if test "$installed" = no && test "$need_relink" = yes; then
+ if test no,yes = "$installed,$need_relink"; then
$ECHO >> $output "\
relink_command=\"$relink_command\""
fi
@@ -9434,27 +10927,29 @@
exit $EXIT_SUCCESS
}
-{ test "$opt_mode" = link || test "$opt_mode" = relink; } &&
- func_mode_link ${1+"$@"}
+if test link = "$opt_mode" || test relink = "$opt_mode"; then
+ func_mode_link ${1+"$@"}
+fi
# func_mode_uninstall arg...
func_mode_uninstall ()
{
- $opt_debug
- RM="$nonopt"
+ $debug_cmd
+
+ RM=$nonopt
files=
- rmforce=
+ rmforce=false
exit_status=0
# This variable tells wrapper scripts just to set variables rather
# than running their programs.
- libtool_install_magic="$magic"
+ libtool_install_magic=$magic
for arg
do
case $arg in
- -f) func_append RM " $arg"; rmforce=yes ;;
+ -f) func_append RM " $arg"; rmforce=: ;;
-*) func_append RM " $arg" ;;
*) func_append files " $arg" ;;
esac
@@ -9467,18 +10962,18 @@
for file in $files; do
func_dirname "$file" "" "."
- dir="$func_dirname_result"
- if test "X$dir" = X.; then
- odir="$objdir"
+ dir=$func_dirname_result
+ if test . = "$dir"; then
+ odir=$objdir
else
- odir="$dir/$objdir"
+ odir=$dir/$objdir
fi
func_basename "$file"
- name="$func_basename_result"
- test "$opt_mode" = uninstall && odir="$dir"
+ name=$func_basename_result
+ test uninstall = "$opt_mode" && odir=$dir
# Remember odir for removal later, being careful to avoid duplicates
- if test "$opt_mode" = clean; then
+ if test clean = "$opt_mode"; then
case " $rmdirs " in
*" $odir "*) ;;
*) func_append rmdirs " $odir" ;;
@@ -9493,11 +10988,11 @@
elif test -d "$file"; then
exit_status=1
continue
- elif test "$rmforce" = yes; then
+ elif $rmforce; then
continue
fi
- rmfiles="$file"
+ rmfiles=$file
case $name in
*.la)
@@ -9511,7 +11006,7 @@
done
test -n "$old_library" && func_append rmfiles " $odir/$old_library"
- case "$opt_mode" in
+ case $opt_mode in
clean)
case " $library_names " in
*" $dlname "*) ;;
@@ -9522,12 +11017,12 @@
uninstall)
if test -n "$library_names"; then
# Do each command in the postuninstall commands.
- func_execute_cmds "$postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ func_execute_cmds "$postuninstall_cmds" '$rmforce || exit_status=1'
fi
if test -n "$old_library"; then
# Do each command in the old_postuninstall commands.
- func_execute_cmds "$old_postuninstall_cmds" 'test "$rmforce" = yes || exit_status=1'
+ func_execute_cmds "$old_postuninstall_cmds" '$rmforce || exit_status=1'
fi
# FIXME: should reinstall the best remaining shared library.
;;
@@ -9543,21 +11038,19 @@
func_source $dir/$name
# Add PIC object to the list of files to remove.
- if test -n "$pic_object" &&
- test "$pic_object" != none; then
+ if test -n "$pic_object" && test none != "$pic_object"; then
func_append rmfiles " $dir/$pic_object"
fi
# Add non-PIC object to the list of files to remove.
- if test -n "$non_pic_object" &&
- test "$non_pic_object" != none; then
+ if test -n "$non_pic_object" && test none != "$non_pic_object"; then
func_append rmfiles " $dir/$non_pic_object"
fi
fi
;;
*)
- if test "$opt_mode" = clean ; then
+ if test clean = "$opt_mode"; then
noexename=$name
case $file in
*.exe)
@@ -9584,12 +11077,12 @@
# note $name still contains .exe if it was in $file originally
# as does the version of $file that was added into $rmfiles
- func_append rmfiles " $odir/$name $odir/${name}S.${objext}"
- if test "$fast_install" = yes && test -n "$relink_command"; then
+ func_append rmfiles " $odir/$name $odir/${name}S.$objext"
+ if test yes = "$fast_install" && test -n "$relink_command"; then
func_append rmfiles " $odir/lt-$name"
fi
- if test "X$noexename" != "X$name" ; then
- func_append rmfiles " $odir/lt-${noexename}.c"
+ if test "X$noexename" != "X$name"; then
+ func_append rmfiles " $odir/lt-$noexename.c"
fi
fi
fi
@@ -9598,7 +11091,7 @@
func_show_eval "$RM $rmfiles" 'exit_status=1'
done
- # Try to remove the ${objdir}s in the directories where we deleted files
+ # Try to remove the $objdir's in the directories where we deleted files
for dir in $rmdirs; do
if test -d "$dir"; then
func_show_eval "rmdir $dir >/dev/null 2>&1"
@@ -9608,16 +11101,17 @@
exit $exit_status
}
-{ test "$opt_mode" = uninstall || test "$opt_mode" = clean; } &&
- func_mode_uninstall ${1+"$@"}
+if test uninstall = "$opt_mode" || test clean = "$opt_mode"; then
+ func_mode_uninstall ${1+"$@"}
+fi
test -z "$opt_mode" && {
- help="$generic_help"
+ help=$generic_help
func_fatal_help "you must specify a MODE"
}
test -z "$exec_cmd" && \
- func_fatal_help "invalid operation mode \`$opt_mode'"
+ func_fatal_help "invalid operation mode '$opt_mode'"
if test -n "$exec_cmd"; then
eval exec "$exec_cmd"
@@ -9628,7 +11122,7 @@
# The TAGs below are defined such that we never get into a situation
-# in which we disable both kinds of libraries. Given conflicting
+# where we disable both kinds of libraries. Given conflicting
# choices, we go for a static library, that is the most portable,
# since we can't tell whether shared libraries were disabled because
# the user asked for that or because the platform doesn't support
@@ -9651,5 +11145,3 @@
# mode:shell-script
# sh-indentation:2
# End:
-# vi:sw=2
-
diff --git a/m4/libtool.m4 b/m4/libtool.m4
index 44e0ecf..a3bc337 100644
--- a/m4/libtool.m4
+++ b/m4/libtool.m4
@@ -1,8 +1,6 @@
# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
#
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
+# Copyright (C) 1996-2001, 2003-2015 Free Software Foundation, Inc.
# Written by Gordon Matzigkeit, 1996
#
# This file is free software; the Free Software Foundation gives
@@ -10,36 +8,30 @@
# modifications, as long as this notice is preserved.
m4_define([_LT_COPYING], [dnl
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
-# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
-# Foundation, Inc.
-# Written by Gordon Matzigkeit, 1996
+# Copyright (C) 2014 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of of the License, or
+# (at your option) any later version.
#
-# This file is part of GNU Libtool.
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program or library that is built
+# using GNU Libtool, you may include this file under the same
+# distribution terms that you use for the rest of that program.
#
-# GNU Libtool is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# As a special exception to the GNU General Public License,
-# if you distribute this file as part of a program or library that
-# is built using GNU Libtool, you may include this file under the
-# same distribution terms that you use for the rest of that program.
-#
-# GNU Libtool is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
-# along with GNU Libtool; see the file COPYING. If not, a copy
-# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
-# obtained by writing to the Free Software Foundation, Inc.,
-# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
])
-# serial 57 LT_INIT
+# serial 58 LT_INIT
# LT_PREREQ(VERSION)
@@ -67,7 +59,7 @@
# LT_INIT([OPTIONS])
# ------------------
AC_DEFUN([LT_INIT],
-[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+[AC_PREREQ([2.62])dnl We use AC_PATH_PROGS_FEATURE_CHECK
AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
AC_BEFORE([$0], [LT_LANG])dnl
AC_BEFORE([$0], [LT_OUTPUT])dnl
@@ -91,7 +83,7 @@
_LT_SET_OPTIONS([$0], [$1])
# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ltmain"
+LIBTOOL_DEPS=$ltmain
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
@@ -111,26 +103,43 @@
dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+# _LT_PREPARE_CC_BASENAME
+# -----------------------
+m4_defun([_LT_PREPARE_CC_BASENAME], [
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+func_cc_basename ()
+{
+ for cc_temp in @S|@*""; do
+ case $cc_temp in
+ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+ done
+ func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+}
+])# _LT_PREPARE_CC_BASENAME
+
+
# _LT_CC_BASENAME(CC)
# -------------------
-# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+# It would be clearer to call AC_REQUIREs from _LT_PREPARE_CC_BASENAME,
+# but that macro is also expanded into generated libtool script, which
+# arranges for $SED and $ECHO to be set by different means.
m4_defun([_LT_CC_BASENAME],
-[for cc_temp in $1""; do
- case $cc_temp in
- compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
- distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
- \-*) ;;
- *) break;;
- esac
-done
-cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+[m4_require([_LT_PREPARE_CC_BASENAME])dnl
+AC_REQUIRE([_LT_DECL_SED])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+func_cc_basename $1
+cc_basename=$func_cc_basename_result
])
# _LT_FILEUTILS_DEFAULTS
# ----------------------
# It is okay to use these file commands and assume they have been set
-# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+# sensibly after 'm4_require([_LT_FILEUTILS_DEFAULTS])'.
m4_defun([_LT_FILEUTILS_DEFAULTS],
[: ${CP="cp -f"}
: ${MV="mv -f"}
@@ -177,15 +186,16 @@
m4_require([_LT_CMD_OLD_ARCHIVE])dnl
m4_require([_LT_CMD_GLOBAL_SYMBOLS])dnl
m4_require([_LT_WITH_SYSROOT])dnl
+m4_require([_LT_CMD_TRUNCATE])dnl
_LT_CONFIG_LIBTOOL_INIT([
-# See if we are running on zsh, and set the options which allow our
+# See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes INIT.
-if test -n "\${ZSH_VERSION+set}" ; then
+if test -n "\${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
])
-if test -n "${ZSH_VERSION+set}" ; then
+if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
@@ -198,7 +208,7 @@
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
- if test "X${COLLECT_NAMES+set}" != Xset; then
+ if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
@@ -209,14 +219,14 @@
ofile=libtool
can_build_shared=yes
-# All known linkers require a `.a' archive for static linking (except MSVC,
+# All known linkers require a '.a' archive for static linking (except MSVC,
# which needs '.lib').
libext=a
-with_gnu_ld="$lt_cv_prog_gnu_ld"
+with_gnu_ld=$lt_cv_prog_gnu_ld
-old_CC="$CC"
-old_CFLAGS="$CFLAGS"
+old_CC=$CC
+old_CFLAGS=$CFLAGS
# Set sane defaults for various variables
test -z "$CC" && CC=cc
@@ -269,14 +279,14 @@
# _LT_PROG_LTMAIN
# ---------------
-# Note that this code is called both from `configure', and `config.status'
+# Note that this code is called both from 'configure', and 'config.status'
# now that we use AC_CONFIG_COMMANDS to generate libtool. Notably,
-# `config.status' has no value for ac_aux_dir unless we are using Automake,
+# 'config.status' has no value for ac_aux_dir unless we are using Automake,
# so we pass a copy along to make sure it has a sensible value anyway.
m4_defun([_LT_PROG_LTMAIN],
[m4_ifdef([AC_REQUIRE_AUX_FILE], [AC_REQUIRE_AUX_FILE([ltmain.sh])])dnl
_LT_CONFIG_LIBTOOL_INIT([ac_aux_dir='$ac_aux_dir'])
-ltmain="$ac_aux_dir/ltmain.sh"
+ltmain=$ac_aux_dir/ltmain.sh
])# _LT_PROG_LTMAIN
@@ -286,7 +296,7 @@
# So that we can recreate a full libtool script including additional
# tags, we accumulate the chunks of code to send to AC_CONFIG_COMMANDS
-# in macros and then make a single call at the end using the `libtool'
+# in macros and then make a single call at the end using the 'libtool'
# label.
@@ -421,8 +431,8 @@
# _LT_CONFIG_STATUS_DECLARE([VARNAME])
# ------------------------------------
-# Quote a variable value, and forward it to `config.status' so that its
-# declaration there will have the same value as in `configure'. VARNAME
+# Quote a variable value, and forward it to 'config.status' so that its
+# declaration there will have the same value as in 'configure'. VARNAME
# must have a single quote delimited value for this to work.
m4_define([_LT_CONFIG_STATUS_DECLARE],
[$1='`$ECHO "$][$1" | $SED "$delay_single_quote_subst"`'])
@@ -446,7 +456,7 @@
# Output comment and list of tags supported by the script
m4_defun([_LT_LIBTOOL_TAGS],
[_LT_FORMAT_COMMENT([The names of the tagged configurations supported by this script])dnl
-available_tags="_LT_TAGS"dnl
+available_tags='_LT_TAGS'dnl
])
@@ -474,7 +484,7 @@
# _LT_LIBTOOL_CONFIG_VARS
# -----------------------
# Produce commented declarations of non-tagged libtool config variables
-# suitable for insertion in the LIBTOOL CONFIG section of the `libtool'
+# suitable for insertion in the LIBTOOL CONFIG section of the 'libtool'
# script. Tagged libtool config variables (even for the LIBTOOL CONFIG
# section) are produced by _LT_LIBTOOL_TAG_VARS.
m4_defun([_LT_LIBTOOL_CONFIG_VARS],
@@ -500,8 +510,8 @@
# Send accumulated output to $CONFIG_STATUS. Thanks to the lists of
# variables for single and double quote escaping we saved from calls
# to _LT_DECL, we can put quote escaped variables declarations
-# into `config.status', and then the shell code to quote escape them in
-# for loops in `config.status'. Finally, any additional code accumulated
+# into 'config.status', and then the shell code to quote escape them in
+# for loops in 'config.status'. Finally, any additional code accumulated
# from calls to _LT_CONFIG_LIBTOOL_INIT is expanded.
m4_defun([_LT_CONFIG_COMMANDS],
[AC_PROVIDE_IFELSE([LT_OUTPUT],
@@ -547,7 +557,7 @@
]], lt_decl_quote_varnames); do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[[\\\\\\\`\\"\\\$]]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -560,7 +570,7 @@
]], lt_decl_dquote_varnames); do
case \`eval \\\\\$ECHO \\\\""\\\\\$\$var"\\\\"\` in
*[[\\\\\\\`\\"\\\$]]*)
- eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\""
+ eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"\\\$\$var\\" | \\\$SED -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" ## exclude from sc_prohibit_nested_quotes
;;
*)
eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\""
@@ -576,7 +586,7 @@
# Generate a child script FILE with all initialization necessary to
# reuse the environment learned by the parent script, and make the
# file executable. If COMMENT is supplied, it is inserted after the
-# `#!' sequence but before initialization text begins. After this
+# '#!' sequence but before initialization text begins. After this
# macro, additional text can be appended to FILE to form the body of
# the child script. The macro ends with non-zero status if the
# file could not be fully written (such as if the disk is full).
@@ -598,7 +608,7 @@
_AS_PREPARE
exec AS_MESSAGE_FD>&1
_ASEOF
-test $lt_write_fail = 0 && chmod +x $1[]dnl
+test 0 = "$lt_write_fail" && chmod +x $1[]dnl
m4_popdef([AS_MESSAGE_LOG_FD])])])# _LT_GENERATED_FILE_INIT
# LT_OUTPUT
@@ -621,7 +631,7 @@
} >&AS_MESSAGE_LOG_FD
lt_cl_help="\
-\`$as_me' creates a local libtool stub from the current configuration,
+'$as_me' creates a local libtool stub from the current configuration,
for use in further configure time tests before the real libtool is
generated.
@@ -643,7 +653,7 @@
This config.lt script is free software; the Free Software Foundation
gives unlimited permision to copy, distribute and modify it."
-while test $[#] != 0
+while test 0 != $[#]
do
case $[1] in
--version | --v* | -V )
@@ -656,10 +666,10 @@
lt_cl_silent=: ;;
-*) AC_MSG_ERROR([unrecognized option: $[1]
-Try \`$[0] --help' for more information.]) ;;
+Try '$[0] --help' for more information.]) ;;
*) AC_MSG_ERROR([unrecognized argument: $[1]
-Try \`$[0] --help' for more information.]) ;;
+Try '$[0] --help' for more information.]) ;;
esac
shift
done
@@ -685,7 +695,7 @@
# open by configure. Here we exec the FD to /dev/null, effectively closing
# config.log, so it can be properly (re)opened and appended to by config.lt.
lt_cl_success=:
-test "$silent" = yes &&
+test yes = "$silent" &&
lt_config_lt_args="$lt_config_lt_args --quiet"
exec AS_MESSAGE_LOG_FD>/dev/null
$SHELL "$CONFIG_LT" $lt_config_lt_args || lt_cl_success=false
@@ -705,27 +715,31 @@
_LT_CONFIG_SAVE_COMMANDS([
m4_define([_LT_TAG], m4_if([$1], [], [C], [$1]))dnl
m4_if(_LT_TAG, [C], [
- # See if we are running on zsh, and set the options which allow our
+ # See if we are running on zsh, and set the options that allow our
# commands through without removal of \ escapes.
- if test -n "${ZSH_VERSION+set}" ; then
+ if test -n "${ZSH_VERSION+set}"; then
setopt NO_GLOB_SUBST
fi
- cfgfile="${ofile}T"
+ cfgfile=${ofile}T
trap "$RM \"$cfgfile\"; exit 1" 1 2 15
$RM "$cfgfile"
cat <<_LT_EOF >> "$cfgfile"
#! $SHELL
-
-# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
-# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION
+# Generated automatically by $as_me ($PACKAGE) $VERSION
# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
-#
+
+# Provide generalized library-building support services.
+# Written by Gordon Matzigkeit, 1996
+
_LT_COPYING
_LT_LIBTOOL_TAGS
+# Configured defaults for sys_lib_dlsearch_path munging.
+: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}
+
# ### BEGIN LIBTOOL CONFIG
_LT_LIBTOOL_CONFIG_VARS
_LT_LIBTOOL_TAG_VARS
@@ -733,13 +747,24 @@
_LT_EOF
+ cat <<'_LT_EOF' >> "$cfgfile"
+
+# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_PREPARE_MUNGE_PATH_LIST
+_LT_PREPARE_CC_BASENAME
+
+# ### END FUNCTIONS SHARED WITH CONFIGURE
+
+_LT_EOF
+
case $host_os in
aix3*)
cat <<\_LT_EOF >> "$cfgfile"
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
-if test "X${COLLECT_NAMES+set}" != Xset; then
+if test set != "${COLLECT_NAMES+set}"; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
@@ -756,8 +781,6 @@
sed '$q' "$ltmain" >> "$cfgfile" \
|| (rm -f "$cfgfile"; exit 1)
- _LT_PROG_REPLACE_SHELLFNS
-
mv -f "$cfgfile" "$ofile" ||
(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
chmod +x "$ofile"
@@ -775,7 +798,6 @@
[m4_if([$1], [], [
PACKAGE='$PACKAGE'
VERSION='$VERSION'
- TIMESTAMP='$TIMESTAMP'
RM='$RM'
ofile='$ofile'], [])
])dnl /_LT_CONFIG_SAVE_COMMANDS
@@ -974,7 +996,7 @@
AC_CACHE_CHECK([for -single_module linker flag],[lt_cv_apple_cc_single_mod],
[lt_cv_apple_cc_single_mod=no
- if test -z "${LT_MULTI_MODULE}"; then
+ if test -z "$LT_MULTI_MODULE"; then
# By default we will add the -single_module flag. You can override
# by either setting the environment variable LT_MULTI_MODULE
# non-empty at configure time, or by adding -multi_module to the
@@ -992,7 +1014,7 @@
cat conftest.err >&AS_MESSAGE_LOG_FD
# Otherwise, if the output was created with a 0 exit code from
# the compiler, it worked.
- elif test -f libconftest.dylib && test $_lt_result -eq 0; then
+ elif test -f libconftest.dylib && test 0 = "$_lt_result"; then
lt_cv_apple_cc_single_mod=yes
else
cat conftest.err >&AS_MESSAGE_LOG_FD
@@ -1010,7 +1032,7 @@
AC_LINK_IFELSE([AC_LANG_PROGRAM([],[])],
[lt_cv_ld_exported_symbols_list=yes],
[lt_cv_ld_exported_symbols_list=no])
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
])
AC_CACHE_CHECK([for -force_load linker flag],[lt_cv_ld_force_load],
@@ -1032,7 +1054,7 @@
_lt_result=$?
if test -s conftest.err && $GREP force_load conftest.err; then
cat conftest.err >&AS_MESSAGE_LOG_FD
- elif test -f conftest && test $_lt_result -eq 0 && $GREP forced_load conftest >/dev/null 2>&1 ; then
+ elif test -f conftest && test 0 = "$_lt_result" && $GREP forced_load conftest >/dev/null 2>&1; then
lt_cv_ld_force_load=yes
else
cat conftest.err >&AS_MESSAGE_LOG_FD
@@ -1042,32 +1064,32 @@
])
case $host_os in
rhapsody* | darwin1.[[012]])
- _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}suppress' ;;
darwin1.*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
darwin*) # darwin 5.x on
# if running on 10.5 or later, the deployment target defaults
# to the OS version, if on x86, and 10.4, the deployment
# target defaults to 10.4. Don't you love it?
case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
10.0,*86*-darwin8*|10.0,*-darwin[[91]]*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- 10.[[012]]*)
- _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
+ 10.[[012]][[,.]]*)
+ _lt_dar_allow_undefined='$wl-flat_namespace $wl-undefined ${wl}suppress' ;;
10.*)
- _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
+ _lt_dar_allow_undefined='$wl-undefined ${wl}dynamic_lookup' ;;
esac
;;
esac
- if test "$lt_cv_apple_cc_single_mod" = "yes"; then
+ if test yes = "$lt_cv_apple_cc_single_mod"; then
_lt_dar_single_mod='$single_module'
fi
- if test "$lt_cv_ld_exported_symbols_list" = "yes"; then
- _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym'
+ if test yes = "$lt_cv_ld_exported_symbols_list"; then
+ _lt_dar_export_syms=' $wl-exported_symbols_list,$output_objdir/$libname-symbols.expsym'
else
- _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}'
+ _lt_dar_export_syms='~$NMEDIT -s $output_objdir/$libname-symbols.expsym $lib'
fi
- if test "$DSYMUTIL" != ":" && test "$lt_cv_ld_force_load" = "no"; then
+ if test : != "$DSYMUTIL" && test no = "$lt_cv_ld_force_load"; then
_lt_dsymutil='~$DSYMUTIL $lib || :'
else
_lt_dsymutil=
@@ -1087,29 +1109,29 @@
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_automatic, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=unsupported
- if test "$lt_cv_ld_force_load" = "yes"; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience ${wl}-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
+ if test yes = "$lt_cv_ld_force_load"; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience $wl-force_load,$conv\"; done; func_echo_all \"$new_convenience\"`'
m4_case([$1], [F77], [_LT_TAGVAR(compiler_needs_object, $1)=yes],
[FC], [_LT_TAGVAR(compiler_needs_object, $1)=yes])
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=''
fi
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(allow_undefined_flag, $1)="$_lt_dar_allow_undefined"
+ _LT_TAGVAR(allow_undefined_flag, $1)=$_lt_dar_allow_undefined
case $cc_basename in
- ifort*) _lt_dar_can_shared=yes ;;
+ ifort*|nagfor*) _lt_dar_can_shared=yes ;;
*) _lt_dar_can_shared=$GCC ;;
esac
- if test "$_lt_dar_can_shared" = "yes"; then
+ if test yes = "$_lt_dar_can_shared"; then
output_verbose_link_cmd=func_echo_all
- _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}"
- _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}"
- _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}"
- _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}"
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dsymutil"
+ _LT_TAGVAR(module_cmds, $1)="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dsymutil"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod$_lt_dar_export_syms$_lt_dsymutil"
+ _LT_TAGVAR(module_expsym_cmds, $1)="sed -e 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags$_lt_dar_export_syms$_lt_dsymutil"
m4_if([$1], [CXX],
-[ if test "$lt_cv_apple_cc_single_mod" != "yes"; then
- _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dsymutil}"
- _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \${lib}-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \${lib}-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring${_lt_dar_export_syms}${_lt_dsymutil}"
+[ if test yes != "$lt_cv_apple_cc_single_mod"; then
+ _LT_TAGVAR(archive_cmds, $1)="\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dsymutil"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="sed 's|^|_|' < \$export_symbols > \$output_objdir/\$libname-symbols.expsym~\$CC -r -keep_private_externs -nostdlib -o \$lib-master.o \$libobjs~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$lib-master.o \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring$_lt_dar_export_syms$_lt_dsymutil"
fi
],[])
else
@@ -1129,7 +1151,7 @@
# Allow to override them for all tags through lt_cv_aix_libpath.
m4_defun([_LT_SYS_MODULE_PATH_AIX],
[m4_require([_LT_DECL_SED])dnl
-if test "${lt_cv_aix_libpath+set}" = set; then
+if test set = "${lt_cv_aix_libpath+set}"; then
aix_libpath=$lt_cv_aix_libpath
else
AC_CACHE_VAL([_LT_TAGVAR([lt_cv_aix_libpath_], [$1])],
@@ -1147,7 +1169,7 @@
_LT_TAGVAR([lt_cv_aix_libpath_], [$1])=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"`
fi],[])
if test -z "$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])"; then
- _LT_TAGVAR([lt_cv_aix_libpath_], [$1])="/usr/lib:/lib"
+ _LT_TAGVAR([lt_cv_aix_libpath_], [$1])=/usr/lib:/lib
fi
])
aix_libpath=$_LT_TAGVAR([lt_cv_aix_libpath_], [$1])
@@ -1167,8 +1189,8 @@
# -----------------------
# Find how we can fake an echo command that does not interpret backslash.
# In particular, with Autoconf 2.60 or later we add some code to the start
-# of the generated configure script which will find a shell with a builtin
-# printf (which we can use as an echo command).
+# of the generated configure script that will find a shell with a builtin
+# printf (that we can use as an echo command).
m4_defun([_LT_PROG_ECHO_BACKSLASH],
[ECHO='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
ECHO=$ECHO$ECHO$ECHO$ECHO$ECHO
@@ -1196,10 +1218,10 @@
# Invoke $ECHO with all args, space-separated.
func_echo_all ()
{
- $ECHO "$*"
+ $ECHO "$*"
}
-case "$ECHO" in
+case $ECHO in
printf*) AC_MSG_RESULT([printf]) ;;
print*) AC_MSG_RESULT([print -r]) ;;
*) AC_MSG_RESULT([cat]) ;;
@@ -1225,16 +1247,17 @@
AC_DEFUN([_LT_WITH_SYSROOT],
[AC_MSG_CHECKING([for sysroot])
AC_ARG_WITH([sysroot],
-[ --with-sysroot[=DIR] Search for dependent libraries within DIR
- (or the compiler's sysroot if not specified).],
+[AS_HELP_STRING([--with-sysroot@<:@=DIR@:>@],
+ [Search for dependent libraries within DIR (or the compiler's sysroot
+ if not specified).])],
[], [with_sysroot=no])
dnl lt_sysroot will always be passed unquoted. We quote it here
dnl in case the user passed a directory name.
lt_sysroot=
-case ${with_sysroot} in #(
+case $with_sysroot in #(
yes)
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
lt_sysroot=`$CC --print-sysroot 2>/dev/null`
fi
;; #(
@@ -1244,14 +1267,14 @@
no|'')
;; #(
*)
- AC_MSG_RESULT([${with_sysroot}])
+ AC_MSG_RESULT([$with_sysroot])
AC_MSG_ERROR([The sysroot must be an absolute path.])
;;
esac
AC_MSG_RESULT([${lt_sysroot:-no}])
_LT_DECL([], [lt_sysroot], [0], [The root where to search for ]dnl
-[dependent libraries, and in which our libraries should be installed.])])
+[dependent libraries, and where our libraries should be installed.])])
# _LT_ENABLE_LOCK
# ---------------
@@ -1259,31 +1282,33 @@
[AC_ARG_ENABLE([libtool-lock],
[AS_HELP_STRING([--disable-libtool-lock],
[avoid locking (might break parallel builds)])])
-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
+test no = "$enable_libtool_lock" || enable_libtool_lock=yes
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
ia64-*-hpux*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set mode
+ # options accordingly.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.$ac_objext` in
*ELF-32*)
- HPUX_IA64_MODE="32"
+ HPUX_IA64_MODE=32
;;
*ELF-64*)
- HPUX_IA64_MODE="64"
+ HPUX_IA64_MODE=64
;;
esac
fi
rm -rf conftest*
;;
*-*-irix6*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
- if test "$lt_cv_prog_gnu_ld" = yes; then
+ if test yes = "$lt_cv_prog_gnu_ld"; then
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -melf32bsmip"
@@ -1312,9 +1337,46 @@
rm -rf conftest*
;;
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+mips64*-*linux*)
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
+ echo '[#]line '$LINENO' "configure"' > conftest.$ac_ext
+ if AC_TRY_EVAL(ac_compile); then
+ emul=elf
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ emul="${emul}32"
+ ;;
+ *64-bit*)
+ emul="${emul}64"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *MSB*)
+ emul="${emul}btsmip"
+ ;;
+ *LSB*)
+ emul="${emul}ltsmip"
+ ;;
+ esac
+ case `/usr/bin/file conftest.$ac_objext` in
+ *N32*)
+ emul="${emul}n32"
+ ;;
+ esac
+ LD="${LD-ld} -m $emul"
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly. Note that the listed cases only cover the
+ # situations where additional linker options are needed (such as when
+ # doing 32-bit compilation for a host where ld defaults to 64-bit, or
+ # vice versa); the common cases where no linker options are needed do
+ # not appear in the list.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.o` in
@@ -1324,9 +1386,19 @@
LD="${LD-ld} -m elf_i386_fbsd"
;;
x86_64-*linux*)
- LD="${LD-ld} -m elf_i386"
+ case `/usr/bin/file conftest.o` in
+ *x86-64*)
+ LD="${LD-ld} -m elf32_x86_64"
+ ;;
+ *)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ esac
;;
- ppc64-*linux*|powerpc64-*linux*)
+ powerpc64le-*linux*)
+ LD="${LD-ld} -m elf32lppclinux"
+ ;;
+ powerpc64-*linux*)
LD="${LD-ld} -m elf32ppclinux"
;;
s390x-*linux*)
@@ -1345,7 +1417,10 @@
x86_64-*linux*)
LD="${LD-ld} -m elf_x86_64"
;;
- ppc*-*linux*|powerpc*-*linux*)
+ powerpcle-*linux*)
+ LD="${LD-ld} -m elf64lppc"
+ ;;
+ powerpc-*linux*)
LD="${LD-ld} -m elf64ppc"
;;
s390*-*linux*|s390*-*tpf*)
@@ -1363,19 +1438,20 @@
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
+ SAVE_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS -belf"
AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
[AC_LANG_PUSH(C)
AC_LINK_IFELSE([AC_LANG_PROGRAM([[]],[[]])],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
AC_LANG_POP])
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
+ if test yes != "$lt_cv_cc_needs_belf"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
+ CFLAGS=$SAVE_CFLAGS
fi
;;
*-*solaris*)
- # Find out which ABI we are using.
+ # Find out what ABI is being produced by ac_compile, and set linker
+ # options accordingly.
echo 'int i;' > conftest.$ac_ext
if AC_TRY_EVAL(ac_compile); then
case `/usr/bin/file conftest.o` in
@@ -1383,7 +1459,7 @@
case $lt_cv_prog_gnu_ld in
yes*)
case $host in
- i?86-*-solaris*)
+ i?86-*-solaris*|x86_64-*-solaris*)
LD="${LD-ld} -m elf_x86_64"
;;
sparc*-*-solaris*)
@@ -1392,7 +1468,7 @@
esac
# GNU ld 2.21 introduced _sol2 emulations. Use them if available.
if ${LD-ld} -V | grep _sol2 >/dev/null 2>&1; then
- LD="${LD-ld}_sol2"
+ LD=${LD-ld}_sol2
fi
;;
*)
@@ -1408,7 +1484,7 @@
;;
esac
-need_locks="$enable_libtool_lock"
+need_locks=$enable_libtool_lock
])# _LT_ENABLE_LOCK
@@ -1427,11 +1503,11 @@
[echo conftest.$ac_objext > conftest.lst
lt_ar_try='$AR $AR_FLAGS libconftest.a @conftest.lst >&AS_MESSAGE_LOG_FD'
AC_TRY_EVAL([lt_ar_try])
- if test "$ac_status" -eq 0; then
+ if test 0 -eq "$ac_status"; then
# Ensure the archiver fails upon bogus file names.
rm -f conftest.$ac_objext libconftest.a
AC_TRY_EVAL([lt_ar_try])
- if test "$ac_status" -ne 0; then
+ if test 0 -ne "$ac_status"; then
lt_cv_ar_at_file=@
fi
fi
@@ -1439,7 +1515,7 @@
])
])
-if test "x$lt_cv_ar_at_file" = xno; then
+if test no = "$lt_cv_ar_at_file"; then
archiver_list_spec=
else
archiver_list_spec=$lt_cv_ar_at_file
@@ -1470,7 +1546,7 @@
if test -n "$RANLIB"; then
case $host_os in
- openbsd*)
+ bitrig* | openbsd*)
old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$tool_oldlib"
;;
*)
@@ -1506,7 +1582,7 @@
[$2=no
m4_if([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4])
echo "$lt_simple_compile_test_code" > conftest.$ac_ext
- lt_compiler_flag="$3"
+ lt_compiler_flag="$3" ## exclude from sc_useless_quotes_in_assignment
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
@@ -1533,7 +1609,7 @@
$RM conftest*
])
-if test x"[$]$2" = xyes; then
+if test yes = "[$]$2"; then
m4_if([$5], , :, [$5])
else
m4_if([$6], , :, [$6])
@@ -1555,7 +1631,7 @@
m4_require([_LT_DECL_SED])dnl
AC_CACHE_CHECK([$1], [$2],
[$2=no
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
LDFLAGS="$LDFLAGS $3"
echo "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
@@ -1574,10 +1650,10 @@
fi
fi
$RM -r conftest*
- LDFLAGS="$save_LDFLAGS"
+ LDFLAGS=$save_LDFLAGS
])
-if test x"[$]$2" = xyes; then
+if test yes = "[$]$2"; then
m4_if([$4], , :, [$4])
else
m4_if([$5], , :, [$5])
@@ -1598,7 +1674,7 @@
AC_MSG_CHECKING([the maximum length of command line arguments])
AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl
i=0
- teststring="ABCD"
+ teststring=ABCD
case $build_os in
msdosdjgpp*)
@@ -1638,7 +1714,7 @@
lt_cv_sys_max_cmd_len=8192;
;;
- netbsd* | freebsd* | openbsd* | darwin* | dragonfly*)
+ bitrig* | darwin* | dragonfly* | freebsd* | netbsd* | openbsd*)
# This has been around since 386BSD, at least. Likely further.
if test -x /sbin/sysctl; then
lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax`
@@ -1688,22 +1764,23 @@
;;
*)
lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null`
- if test -n "$lt_cv_sys_max_cmd_len"; then
+ if test -n "$lt_cv_sys_max_cmd_len" && \
+ test undefined != "$lt_cv_sys_max_cmd_len"; then
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4`
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3`
else
# Make teststring a little bigger before we do anything with it.
# a 1K string should be a reasonable start.
- for i in 1 2 3 4 5 6 7 8 ; do
+ for i in 1 2 3 4 5 6 7 8; do
teststring=$teststring$teststring
done
SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}}
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
- while { test "X"`env echo "$teststring$teststring" 2>/dev/null` \
+ while { test X`env echo "$teststring$teststring" 2>/dev/null` \
= "X$teststring$teststring"; } >/dev/null 2>&1 &&
- test $i != 17 # 1/2 MB should be enough
+ test 17 != "$i" # 1/2 MB should be enough
do
i=`expr $i + 1`
teststring=$teststring$teststring
@@ -1719,7 +1796,7 @@
;;
esac
])
-if test -n $lt_cv_sys_max_cmd_len ; then
+if test -n "$lt_cv_sys_max_cmd_len"; then
AC_MSG_RESULT($lt_cv_sys_max_cmd_len)
else
AC_MSG_RESULT(none)
@@ -1747,7 +1824,7 @@
# ----------------------------------------------------------------
m4_defun([_LT_TRY_DLOPEN_SELF],
[m4_require([_LT_HEADER_DLFCN])dnl
-if test "$cross_compiling" = yes; then :
+if test yes = "$cross_compiling"; then :
[$4]
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
@@ -1794,9 +1871,9 @@
# endif
#endif
-/* When -fvisbility=hidden is used, assume the code has been annotated
+/* When -fvisibility=hidden is used, assume the code has been annotated
correspondingly for the symbols needed. */
-#if defined(__GNUC__) && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
+#if defined __GNUC__ && (((__GNUC__ == 3) && (__GNUC_MINOR__ >= 3)) || (__GNUC__ > 3))
int fnord () __attribute__((visibility("default")));
#endif
@@ -1822,7 +1899,7 @@
return status;
}]
_LT_EOF
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then
+ if AC_TRY_EVAL(ac_link) && test -s "conftest$ac_exeext" 2>/dev/null; then
(./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null
lt_status=$?
case x$lt_status in
@@ -1843,7 +1920,7 @@
# ------------------
AC_DEFUN([LT_SYS_DLOPEN_SELF],
[m4_require([_LT_HEADER_DLFCN])dnl
-if test "x$enable_dlopen" != xyes; then
+if test yes != "$enable_dlopen"; then
enable_dlopen=unknown
enable_dlopen_self=unknown
enable_dlopen_self_static=unknown
@@ -1853,44 +1930,52 @@
case $host_os in
beos*)
- lt_cv_dlopen="load_add_on"
+ lt_cv_dlopen=load_add_on
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
;;
mingw* | pw32* | cegcc*)
- lt_cv_dlopen="LoadLibrary"
+ lt_cv_dlopen=LoadLibrary
lt_cv_dlopen_libs=
;;
cygwin*)
- lt_cv_dlopen="dlopen"
+ lt_cv_dlopen=dlopen
lt_cv_dlopen_libs=
;;
darwin*)
- # if libdl is installed we need to link against it
+ # if libdl is installed we need to link against it
AC_CHECK_LIB([dl], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[
- lt_cv_dlopen="dyld"
+ [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],[
+ lt_cv_dlopen=dyld
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
])
;;
+ tpf*)
+ # Don't try to run any link tests for TPF. We know it's impossible
+ # because TPF is a cross-compiler, and we know how we open DSOs.
+ lt_cv_dlopen=dlopen
+ lt_cv_dlopen_libs=
+ lt_cv_dlopen_self=no
+ ;;
+
*)
AC_CHECK_FUNC([shl_load],
- [lt_cv_dlopen="shl_load"],
+ [lt_cv_dlopen=shl_load],
[AC_CHECK_LIB([dld], [shl_load],
- [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld"],
+ [lt_cv_dlopen=shl_load lt_cv_dlopen_libs=-ldld],
[AC_CHECK_FUNC([dlopen],
- [lt_cv_dlopen="dlopen"],
+ [lt_cv_dlopen=dlopen],
[AC_CHECK_LIB([dl], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],
+ [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-ldl],
[AC_CHECK_LIB([svld], [dlopen],
- [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"],
+ [lt_cv_dlopen=dlopen lt_cv_dlopen_libs=-lsvld],
[AC_CHECK_LIB([dld], [dld_link],
- [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld"])
+ [lt_cv_dlopen=dld_link lt_cv_dlopen_libs=-ldld])
])
])
])
@@ -1899,21 +1984,21 @@
;;
esac
- if test "x$lt_cv_dlopen" != xno; then
- enable_dlopen=yes
- else
+ if test no = "$lt_cv_dlopen"; then
enable_dlopen=no
+ else
+ enable_dlopen=yes
fi
case $lt_cv_dlopen in
dlopen)
- save_CPPFLAGS="$CPPFLAGS"
- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
+ save_CPPFLAGS=$CPPFLAGS
+ test yes = "$ac_cv_header_dlfcn_h" && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
- save_LDFLAGS="$LDFLAGS"
+ save_LDFLAGS=$LDFLAGS
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
- save_LIBS="$LIBS"
+ save_LIBS=$LIBS
LIBS="$lt_cv_dlopen_libs $LIBS"
AC_CACHE_CHECK([whether a program can dlopen itself],
@@ -1923,7 +2008,7 @@
lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross)
])
- if test "x$lt_cv_dlopen_self" = xyes; then
+ if test yes = "$lt_cv_dlopen_self"; then
wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
AC_CACHE_CHECK([whether a statically linked program can dlopen itself],
lt_cv_dlopen_self_static, [dnl
@@ -1933,9 +2018,9 @@
])
fi
- CPPFLAGS="$save_CPPFLAGS"
- LDFLAGS="$save_LDFLAGS"
- LIBS="$save_LIBS"
+ CPPFLAGS=$save_CPPFLAGS
+ LDFLAGS=$save_LDFLAGS
+ LIBS=$save_LIBS
;;
esac
@@ -2027,8 +2112,8 @@
m4_require([_LT_FILEUTILS_DEFAULTS])dnl
_LT_COMPILER_C_O([$1])
-hard_links="nottested"
-if test "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then
+hard_links=nottested
+if test no = "$_LT_TAGVAR(lt_cv_prog_compiler_c_o, $1)" && test no != "$need_locks"; then
# do not overwrite the value of need_locks provided by the user
AC_MSG_CHECKING([if we can lock with hard links])
hard_links=yes
@@ -2038,8 +2123,8 @@
ln conftest.a conftest.b 2>&5 || hard_links=no
ln conftest.a conftest.b 2>/dev/null && hard_links=no
AC_MSG_RESULT([$hard_links])
- if test "$hard_links" = no; then
- AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe])
+ if test no = "$hard_links"; then
+ AC_MSG_WARN(['$CC' does not support '-c -o', so 'make -j' may be unsafe])
need_locks=warn
fi
else
@@ -2066,8 +2151,8 @@
_LT_DECL([], [objdir], [0],
[The name of the directory that contains temporary libtool files])dnl
m4_pattern_allow([LT_OBJDIR])dnl
-AC_DEFINE_UNQUOTED(LT_OBJDIR, "$lt_cv_objdir/",
- [Define to the sub-directory in which libtool stores uninstalled libraries.])
+AC_DEFINE_UNQUOTED([LT_OBJDIR], "$lt_cv_objdir/",
+ [Define to the sub-directory where libtool stores uninstalled libraries.])
])# _LT_CHECK_OBJDIR
@@ -2079,15 +2164,15 @@
_LT_TAGVAR(hardcode_action, $1)=
if test -n "$_LT_TAGVAR(hardcode_libdir_flag_spec, $1)" ||
test -n "$_LT_TAGVAR(runpath_var, $1)" ||
- test "X$_LT_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then
+ test yes = "$_LT_TAGVAR(hardcode_automatic, $1)"; then
# We can hardcode non-existent directories.
- if test "$_LT_TAGVAR(hardcode_direct, $1)" != no &&
+ if test no != "$_LT_TAGVAR(hardcode_direct, $1)" &&
# If the only mechanism to avoid hardcoding is shlibpath_var, we
# have to relink, otherwise we might link with an installed library
# when we should be linking with a yet-to-be-installed one
- ## test "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" != no &&
- test "$_LT_TAGVAR(hardcode_minus_L, $1)" != no; then
+ ## test no != "$_LT_TAGVAR(hardcode_shlibpath_var, $1)" &&
+ test no != "$_LT_TAGVAR(hardcode_minus_L, $1)"; then
# Linking always hardcodes the temporary library directory.
_LT_TAGVAR(hardcode_action, $1)=relink
else
@@ -2101,12 +2186,12 @@
fi
AC_MSG_RESULT([$_LT_TAGVAR(hardcode_action, $1)])
-if test "$_LT_TAGVAR(hardcode_action, $1)" = relink ||
- test "$_LT_TAGVAR(inherit_rpath, $1)" = yes; then
+if test relink = "$_LT_TAGVAR(hardcode_action, $1)" ||
+ test yes = "$_LT_TAGVAR(inherit_rpath, $1)"; then
# Fast installation is not supported
enable_fast_install=no
-elif test "$shlibpath_overrides_runpath" = yes ||
- test "$enable_shared" = no; then
+elif test yes = "$shlibpath_overrides_runpath" ||
+ test no = "$enable_shared"; then
# Fast installation is not necessary
enable_fast_install=needless
fi
@@ -2130,7 +2215,7 @@
# FIXME - insert some real tests, host_os isn't really good enough
case $host_os in
darwin*)
- if test -n "$STRIP" ; then
+ if test -n "$STRIP"; then
striplib="$STRIP -x"
old_striplib="$STRIP -S"
AC_MSG_RESULT([yes])
@@ -2148,6 +2233,47 @@
])# _LT_CMD_STRIPLIB
+# _LT_PREPARE_MUNGE_PATH_LIST
+# ---------------------------
+# Make sure func_munge_path_list() is defined correctly.
+m4_defun([_LT_PREPARE_MUNGE_PATH_LIST],
+[[# func_munge_path_list VARIABLE PATH
+# -----------------------------------
+# VARIABLE is name of variable containing _space_ separated list of
+# directories to be munged by the contents of PATH, which is string
+# having a format:
+# "DIR[:DIR]:"
+# string "DIR[ DIR]" will be prepended to VARIABLE
+# ":DIR[:DIR]"
+# string "DIR[ DIR]" will be appended to VARIABLE
+# "DIRP[:DIRP]::[DIRA:]DIRA"
+# string "DIRP[ DIRP]" will be prepended to VARIABLE and string
+# "DIRA[ DIRA]" will be appended to VARIABLE
+# "DIR[:DIR]"
+# VARIABLE will be replaced by "DIR[ DIR]"
+func_munge_path_list ()
+{
+ case x@S|@2 in
+ x)
+ ;;
+ *:)
+ eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'` \@S|@@S|@1\"
+ ;;
+ x:*)
+ eval @S|@1=\"\@S|@@S|@1 `$ECHO @S|@2 | $SED 's/:/ /g'`\"
+ ;;
+ *::*)
+ eval @S|@1=\"\@S|@@S|@1\ `$ECHO @S|@2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
+ eval @S|@1=\"`$ECHO @S|@2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \@S|@@S|@1\"
+ ;;
+ *)
+ eval @S|@1=\"`$ECHO @S|@2 | $SED 's/:/ /g'`\"
+ ;;
+ esac
+}
+]])# _LT_PREPARE_PATH_LIST
+
+
# _LT_SYS_DYNAMIC_LINKER([TAG])
# -----------------------------
# PORTME Fill in your ld.so characteristics
@@ -2158,17 +2284,18 @@
m4_require([_LT_DECL_OBJDUMP])dnl
m4_require([_LT_DECL_SED])dnl
m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PREPARE_MUNGE_PATH_LIST])dnl
AC_MSG_CHECKING([dynamic linker characteristics])
m4_if([$1],
[], [
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
case $host_os in
- darwin*) lt_awk_arg="/^libraries:/,/LR/" ;;
- *) lt_awk_arg="/^libraries:/" ;;
+ darwin*) lt_awk_arg='/^libraries:/,/LR/' ;;
+ *) lt_awk_arg='/^libraries:/' ;;
esac
case $host_os in
- mingw* | cegcc*) lt_sed_strip_eq="s,=\([[A-Za-z]]:\),\1,g" ;;
- *) lt_sed_strip_eq="s,=/,/,g" ;;
+ mingw* | cegcc*) lt_sed_strip_eq='s|=\([[A-Za-z]]:\)|\1|g' ;;
+ *) lt_sed_strip_eq='s|=/|/|g' ;;
esac
lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e $lt_sed_strip_eq`
case $lt_search_path_spec in
@@ -2184,28 +2311,35 @@
;;
esac
# Ok, now we have the path, separated by spaces, we can step through it
- # and add multilib dir if necessary.
+ # and add multilib dir if necessary...
lt_tmp_lt_search_path_spec=
- lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ lt_multi_os_dir=/`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null`
+ # ...but if some path component already ends with the multilib dir we assume
+ # that all is fine and trust -print-search-dirs as is (GCC 4.2? or newer).
+ case "$lt_multi_os_dir; $lt_search_path_spec " in
+ "/; "* | "/.; "* | "/./; "* | *"$lt_multi_os_dir "* | *"$lt_multi_os_dir/ "*)
+ lt_multi_os_dir=
+ ;;
+ esac
for lt_sys_path in $lt_search_path_spec; do
- if test -d "$lt_sys_path/$lt_multi_os_dir"; then
- lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir"
- else
+ if test -d "$lt_sys_path$lt_multi_os_dir"; then
+ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path$lt_multi_os_dir"
+ elif test -n "$lt_multi_os_dir"; then
test -d "$lt_sys_path" && \
lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path"
fi
done
lt_search_path_spec=`$ECHO "$lt_tmp_lt_search_path_spec" | awk '
-BEGIN {RS=" "; FS="/|\n";} {
- lt_foo="";
- lt_count=0;
+BEGIN {RS = " "; FS = "/|\n";} {
+ lt_foo = "";
+ lt_count = 0;
for (lt_i = NF; lt_i > 0; lt_i--) {
if ($lt_i != "" && $lt_i != ".") {
if ($lt_i == "..") {
lt_count++;
} else {
if (lt_count == 0) {
- lt_foo="/" $lt_i lt_foo;
+ lt_foo = "/" $lt_i lt_foo;
} else {
lt_count--;
}
@@ -2219,7 +2353,7 @@
# for these hosts.
case $host_os in
mingw* | cegcc*) lt_search_path_spec=`$ECHO "$lt_search_path_spec" |\
- $SED 's,/\([[A-Za-z]]:\),\1,g'` ;;
+ $SED 's|/\([[A-Za-z]]:\)|\1|g'` ;;
esac
sys_lib_search_path_spec=`$ECHO "$lt_search_path_spec" | $lt_NL2SP`
else
@@ -2228,7 +2362,7 @@
library_names_spec=
libname_spec='lib$name'
soname_spec=
-shrext_cmds=".so"
+shrext_cmds=.so
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
@@ -2245,14 +2379,17 @@
# flags to be left without arguments
need_version=unknown
+AC_ARG_VAR([LT_SYS_LIBRARY_PATH],
+[User-defined run-time library search path.])
+
case $host_os in
aix3*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname.a'
shlibpath_var=LIBPATH
# AIX 3 has no versioning support, so we append a major version to the name.
- soname_spec='${libname}${release}${shared_ext}$major'
+ soname_spec='$libname$release$shared_ext$major'
;;
aix[[4-9]]*)
@@ -2260,41 +2397,91 @@
need_lib_prefix=no
need_version=no
hardcode_into_libs=yes
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 supports IA64
- library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$major $libname$release$shared_ext$versuffix $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
else
# With GCC up to 2.95.x, collect2 would create an import file
# for dependence libraries. The import file would start with
- # the line `#! .'. This would cause the generated library to
- # depend on `.', always an invalid library. This was fixed in
+ # the line '#! .'. This would cause the generated library to
+ # depend on '.', always an invalid library. This was fixed in
# development snapshots of GCC prior to 3.0.
case $host_os in
aix4 | aix4.[[01]] | aix4.[[01]].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
- echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then
+ echo '#endif'; } | $CC -E - | $GREP yes > /dev/null; then
:
else
can_build_shared=no
fi
;;
esac
- # AIX (on Power*) has no versioning support, so currently we can not hardcode correct
+ # Using Import Files as archive members, it is possible to support
+ # filename-based versioning of shared library archives on AIX. While
+ # this would work for both with and without runtime linking, it will
+ # prevent static linking of such archives. So we do filename-based
+ # shared library versioning with .so extension only, which is used
+ # when both runtime linking and shared linking is enabled.
+ # Unfortunately, runtime linking may impact performance, so we do
+ # not want this to be the default eventually. Also, we use the
+ # versioned .so libs for executables only if there is the -brtl
+ # linker flag in LDFLAGS as well, or --with-aix-soname=svr4 only.
+ # To allow for filename-based versioning support, we need to create
+ # libNAME.so.V as an archive file, containing:
+ # *) an Import File, referring to the versioned filename of the
+ # archive as well as the shared archive member, telling the
+ # bitwidth (32 or 64) of that shared object, and providing the
+ # list of exported symbols of that shared object, eventually
+ # decorated with the 'weak' keyword
+ # *) the shared object with the F_LOADONLY flag set, to really avoid
+ # it being seen by the linker.
+ # At run time we better use the real file rather than another symlink,
+ # but for link time we create the symlink libNAME.so -> libNAME.so.V
+
+ case $with_aix_soname,$aix_use_runtimelinking in
+ # AIX (on Power*) has no versioning support, so currently we cannot hardcode correct
# soname into executable. Probably we can add versioning support to
# collect2, so additional links can be useful in future.
- if test "$aix_use_runtimelinking" = yes; then
+ aix,yes) # traditional libtool
+ dynamic_linker='AIX unversionable lib.so'
# If using run time linking (on AIX 4.2 or later) use lib<name>.so
# instead of lib<name>.a to let people know that these are not
# typical AIX shared libraries.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- else
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ ;;
+ aix,no) # traditional AIX only
+ dynamic_linker='AIX lib.a[(]lib.so.V[)]'
# We preserve .a as extension for shared libraries through AIX4.2
# and later when we are not doing run time linking.
- library_names_spec='${libname}${release}.a $libname.a'
- soname_spec='${libname}${release}${shared_ext}$major'
- fi
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ ;;
+ svr4,*) # full svr4 only
+ dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)]"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,yes) # both, prefer svr4
+ dynamic_linker="AIX lib.so.V[(]$shared_archive_member_spec.o[)], lib.a[(]lib.so.V[)]"
+ library_names_spec='$libname$release$shared_ext$major $libname$shared_ext'
+ # unpreferred sharedlib libNAME.a needs extra handling
+ postinstall_cmds='test -n "$linkname" || linkname="$realname"~func_stripname "" ".so" "$linkname"~$install_shared_prog "$dir/$func_stripname_result.$libext" "$destdir/$func_stripname_result.$libext"~test -z "$tstripme" || test -z "$striplib" || $striplib "$destdir/$func_stripname_result.$libext"'
+ postuninstall_cmds='for n in $library_names $old_library; do :; done~func_stripname "" ".so" "$n"~test "$func_stripname_result" = "$n" || func_append rmfiles " $odir/$func_stripname_result.$libext"'
+ # We do not specify a path in Import Files, so LIBPATH fires.
+ shlibpath_overrides_runpath=yes
+ ;;
+ *,no) # both, prefer aix
+ dynamic_linker="AIX lib.a[(]lib.so.V[)], lib.so.V[(]$shared_archive_member_spec.o[)]"
+ library_names_spec='$libname$release.a $libname.a'
+ soname_spec='$libname$release$shared_ext$major'
+ # unpreferred sharedlib libNAME.so.V and symlink libNAME.so need extra handling
+ postinstall_cmds='test -z "$dlname" || $install_shared_prog $dir/$dlname $destdir/$dlname~test -z "$tstripme" || test -z "$striplib" || $striplib $destdir/$dlname~test -n "$linkname" || linkname=$realname~func_stripname "" ".a" "$linkname"~(cd "$destdir" && $LN_S -f $dlname $func_stripname_result.so)'
+ postuninstall_cmds='test -z "$dlname" || func_append rmfiles " $odir/$dlname"~for n in $old_library $library_names; do :; done~func_stripname "" ".a" "$n"~func_append rmfiles " $odir/$func_stripname_result.so"'
+ ;;
+ esac
shlibpath_var=LIBPATH
fi
;;
@@ -2304,18 +2491,18 @@
powerpc)
# Since July 2007 AmigaOS4 officially supports .so libraries.
# When compiling the executable, add -use-dynld -Lsobjs: to the compileline.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
;;
m68k)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
+ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`func_echo_all "$lib" | $SED '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done'
;;
esac
;;
beos*)
- library_names_spec='${libname}${shared_ext}'
+ library_names_spec='$libname$shared_ext'
dynamic_linker="$host_os ld.so"
shlibpath_var=LIBRARY_PATH
;;
@@ -2323,8 +2510,8 @@
bsdi[[45]]*)
version_type=linux # correct to gnu/linux during the next big refactor
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
@@ -2336,7 +2523,7 @@
cygwin* | mingw* | pw32* | cegcc*)
version_type=windows
- shrext_cmds=".dll"
+ shrext_cmds=.dll
need_version=no
need_lib_prefix=no
@@ -2345,8 +2532,8 @@
# gcc
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname~
@@ -2362,17 +2549,17 @@
case $host_os in
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ soname_spec='`echo $libname | sed -e 's/^lib/cyg/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
m4_if([$1], [],[
sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/lib/w32api"])
;;
mingw* | cegcc*)
# MinGW DLLs use traditional 'lib' prefix
- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
+ library_names_spec='`echo $libname | sed -e 's/^lib/pw/'``echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
;;
esac
dynamic_linker='Win32 ld.exe'
@@ -2381,8 +2568,8 @@
*,cl*)
# Native MSVC
libname_spec='$name'
- soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}'
- library_names_spec='${libname}.dll.lib'
+ soname_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext'
+ library_names_spec='$libname.dll.lib'
case $build_os in
mingw*)
@@ -2409,7 +2596,7 @@
sys_lib_search_path_spec=`cygpath --path --unix "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
;;
*)
- sys_lib_search_path_spec="$LIB"
+ sys_lib_search_path_spec=$LIB
if $ECHO "$sys_lib_search_path_spec" | [$GREP ';[c-zC-Z]:/' >/dev/null]; then
# It is most probably a Windows format PATH.
sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
@@ -2422,8 +2609,8 @@
esac
# DLL is installed to $(libdir)/../bin by postinstall_cmds
- postinstall_cmds='base_file=`basename \${file}`~
- dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname'
@@ -2436,7 +2623,7 @@
*)
# Assume MSVC wrapper
- library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
+ library_names_spec='$libname`echo $release | $SED -e 's/[[.]]/-/g'`$versuffix$shared_ext $libname.lib'
dynamic_linker='Win32 ld.exe'
;;
esac
@@ -2449,8 +2636,8 @@
version_type=darwin
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext'
- soname_spec='${libname}${release}${major}$shared_ext'
+ library_names_spec='$libname$release$major$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$major$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`'
@@ -2463,8 +2650,8 @@
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
@@ -2482,12 +2669,13 @@
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
need_version=no
need_lib_prefix=no
;;
freebsd-*)
- library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
need_version=yes
;;
esac
@@ -2512,26 +2700,15 @@
esac
;;
-gnu*)
- version_type=linux # correct to gnu/linux during the next big refactor
- need_lib_prefix=no
- need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- shlibpath_var=LD_LIBRARY_PATH
- shlibpath_overrides_runpath=no
- hardcode_into_libs=yes
- ;;
-
haiku*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
dynamic_linker="$host_os runtime_loader"
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LIBRARY_PATH
- shlibpath_overrides_runpath=yes
+ shlibpath_overrides_runpath=no
sys_lib_dlsearch_path_spec='/boot/home/config/lib /boot/common/lib /boot/system/lib'
hardcode_into_libs=yes
;;
@@ -2549,14 +2726,15 @@
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
- if test "X$HPUX_IA64_MODE" = X32; then
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
+ if test 32 = "$HPUX_IA64_MODE"; then
sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux32
else
sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
+ sys_lib_dlsearch_path_spec=/usr/lib/hpux64
fi
- sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext_cmds='.sl'
@@ -2564,8 +2742,8 @@
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
@@ -2574,8 +2752,8 @@
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
;;
esac
# HP-UX runs *really* slowly unless shared libraries are mode 555, ...
@@ -2588,8 +2766,8 @@
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
@@ -2600,7 +2778,7 @@
case $host_os in
nonstopux*) version_type=nonstopux ;;
*)
- if test "$lt_cv_prog_gnu_ld" = yes; then
+ if test yes = "$lt_cv_prog_gnu_ld"; then
version_type=linux # correct to gnu/linux during the next big refactor
else
version_type=irix
@@ -2608,8 +2786,8 @@
esac
need_lib_prefix=no
need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$release$shared_ext $libname$shared_ext'
case $host_os in
irix5* | nonstopux*)
libsuff= shlibsuff=
@@ -2628,8 +2806,8 @@
esac
shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
shlibpath_overrides_runpath=no
- sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
- sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
+ sys_lib_search_path_spec="/usr/lib$libsuff /lib$libsuff /usr/local/lib$libsuff"
+ sys_lib_dlsearch_path_spec="/usr/lib$libsuff /lib$libsuff"
hardcode_into_libs=yes
;;
@@ -2638,13 +2816,33 @@
dynamic_linker=no
;;
+linux*android*)
+ version_type=none # Android doesn't support versioned libraries.
+ need_lib_prefix=no
+ need_version=no
+ library_names_spec='$libname$release$shared_ext'
+ soname_spec='$libname$release$shared_ext'
+ finish_cmds=
+ shlibpath_var=LD_LIBRARY_PATH
+ shlibpath_overrides_runpath=yes
+
+ # This implies no fast_install, which is unacceptable.
+ # Some rework will be needed to allow for fast_install
+ # before this can be enabled.
+ hardcode_into_libs=yes
+
+ dynamic_linker='Android linker'
+ # Don't embed -rpath directories since the linker doesn't support them.
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ ;;
+
# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
@@ -2669,7 +2867,12 @@
# before this can be enabled.
hardcode_into_libs=yes
- # Append ld.so.conf contents to the search path
+ # Ideally, we could use ldconfig to report *all* directores which are
+ # searched for libraries, however this is still not possible. Aside from not
+ # being certain /sbin/ldconfig is available, command
+ # 'ldconfig -N -X -v | grep ^/' on 64bit Fedora does not report /usr/lib64,
+ # even though it is searched at run-time. Try to do the best guess by
+ # appending ld.so.conf contents (and includes) to the search path.
if test -f /etc/ld.so.conf; then
lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;s/"//g;/^$/d' | tr '\n' ' '`
sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra"
@@ -2689,12 +2892,12 @@
need_lib_prefix=no
need_version=no
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
dynamic_linker='NetBSD ld.elf_so'
fi
shlibpath_var=LD_LIBRARY_PATH
@@ -2704,7 +2907,7 @@
newsos6)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
@@ -2713,58 +2916,68 @@
version_type=qnx
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
dynamic_linker='ldqnx.so'
;;
-openbsd*)
+openbsd* | bitrig*)
version_type=sunos
- sys_lib_dlsearch_path_spec="/usr/lib"
+ sys_lib_dlsearch_path_spec=/usr/lib
need_lib_prefix=no
- # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs.
- case $host_os in
- openbsd3.3 | openbsd3.3.*) need_version=yes ;;
- *) need_version=no ;;
- esac
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
+ need_version=no
+ else
+ need_version=yes
+ fi
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- case $host_os in
- openbsd2.[[89]] | openbsd2.[[89]].*)
- shlibpath_overrides_runpath=no
- ;;
- *)
- shlibpath_overrides_runpath=yes
- ;;
- esac
- else
- shlibpath_overrides_runpath=yes
- fi
+ shlibpath_overrides_runpath=yes
;;
os2*)
libname_spec='$name'
- shrext_cmds=".dll"
+ version_type=windows
+ shrext_cmds=.dll
+ need_version=no
need_lib_prefix=no
- library_names_spec='$libname${shared_ext} $libname.a'
+ # OS/2 can only load a DLL with a base name of 8 characters or less.
+ soname_spec='`test -n "$os2dllname" && libname="$os2dllname";
+ v=$($ECHO $release$versuffix | tr -d .-);
+ n=$($ECHO $libname | cut -b -$((8 - ${#v})) | tr . _);
+ $ECHO $n$v`$shared_ext'
+ library_names_spec='${libname}_dll.$libext'
dynamic_linker='OS/2 ld.exe'
- shlibpath_var=LIBPATH
+ shlibpath_var=BEGINLIBPATH
+ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
+ postinstall_cmds='base_file=`basename \$file`~
+ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\$base_file'\''i; $ECHO \$dlname'\''`~
+ dldir=$destdir/`dirname \$dlpath`~
+ test -d \$dldir || mkdir -p \$dldir~
+ $install_prog $dir/$dlname \$dldir/$dlname~
+ chmod a+x \$dldir/$dlname~
+ if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then
+ eval '\''$striplib \$dldir/$dlname'\'' || exit \$?;
+ fi'
+ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; $ECHO \$dlname'\''`~
+ dlpath=$dir/\$dldll~
+ $RM \$dlpath'
;;
osf3* | osf4* | osf5*)
version_type=osf
need_lib_prefix=no
need_version=no
- soname_spec='${libname}${release}${shared_ext}$major'
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ soname_spec='$libname$release$shared_ext$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
- sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
+ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
rdos*)
@@ -2775,8 +2988,8 @@
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
@@ -2786,11 +2999,11 @@
sunos4*)
version_type=sunos
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$shared_ext$versuffix'
finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
need_lib_prefix=no
fi
need_version=yes
@@ -2798,8 +3011,8 @@
sysv4 | sysv4.3*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
case $host_vendor in
sni)
@@ -2820,24 +3033,24 @@
;;
sysv4*MP*)
- if test -d /usr/nec ;then
+ if test -d /usr/nec; then
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
- soname_spec='$libname${shared_ext}.$major'
+ library_names_spec='$libname$shared_ext.$versuffix $libname$shared_ext.$major $libname$shared_ext'
+ soname_spec='$libname$shared_ext.$major'
shlibpath_var=LD_LIBRARY_PATH
fi
;;
sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*)
- version_type=freebsd-elf
+ version_type=sco
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib'
else
sys_lib_search_path_spec='/usr/ccs/lib /usr/lib'
@@ -2855,7 +3068,7 @@
version_type=linux # correct to gnu/linux during the next big refactor
need_lib_prefix=no
need_version=no
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
@@ -2863,8 +3076,8 @@
uts4*)
version_type=linux # correct to gnu/linux during the next big refactor
- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
- soname_spec='${libname}${release}${shared_ext}$major'
+ library_names_spec='$libname$release$shared_ext$versuffix $libname$release$shared_ext$major $libname$shared_ext'
+ soname_spec='$libname$release$shared_ext$major'
shlibpath_var=LD_LIBRARY_PATH
;;
@@ -2873,20 +3086,30 @@
;;
esac
AC_MSG_RESULT([$dynamic_linker])
-test "$dynamic_linker" = no && can_build_shared=no
+test no = "$dynamic_linker" && can_build_shared=no
variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
-if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then
- sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec"
+if test set = "${lt_cv_sys_lib_search_path_spec+set}"; then
+ sys_lib_search_path_spec=$lt_cv_sys_lib_search_path_spec
fi
-if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then
- sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec"
+
+if test set = "${lt_cv_sys_lib_dlsearch_path_spec+set}"; then
+ sys_lib_dlsearch_path_spec=$lt_cv_sys_lib_dlsearch_path_spec
fi
+# remember unaugmented sys_lib_dlsearch_path content for libtool script decls...
+configure_time_dlsearch_path=$sys_lib_dlsearch_path_spec
+
+# ... but it needs LT_SYS_LIBRARY_PATH munging for other configure-time code
+func_munge_path_list sys_lib_dlsearch_path_spec "$LT_SYS_LIBRARY_PATH"
+
+# to be used as default LT_SYS_LIBRARY_PATH value in generated libtool
+configure_time_lt_sys_library_path=$LT_SYS_LIBRARY_PATH
+
_LT_DECL([], [variables_saved_for_relink], [1],
[Variables whose values should be saved in libtool wrapper scripts and
restored at link time])
@@ -2919,39 +3142,41 @@
[Whether we should hardcode library paths into libraries])
_LT_DECL([], [sys_lib_search_path_spec], [2],
[Compile-time system search path for libraries])
-_LT_DECL([], [sys_lib_dlsearch_path_spec], [2],
- [Run-time system search path for libraries])
+_LT_DECL([sys_lib_dlsearch_path_spec], [configure_time_dlsearch_path], [2],
+ [Detected run-time system search path for libraries])
+_LT_DECL([], [configure_time_lt_sys_library_path], [2],
+ [Explicit LT_SYS_LIBRARY_PATH set during ./configure time])
])# _LT_SYS_DYNAMIC_LINKER
# _LT_PATH_TOOL_PREFIX(TOOL)
# --------------------------
-# find a file program which can recognize shared library
+# find a file program that can recognize shared library
AC_DEFUN([_LT_PATH_TOOL_PREFIX],
[m4_require([_LT_DECL_EGREP])dnl
AC_MSG_CHECKING([for $1])
AC_CACHE_VAL(lt_cv_path_MAGIC_CMD,
[case $MAGIC_CMD in
[[\\/*] | ?:[\\/]*])
- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ lt_cv_path_MAGIC_CMD=$MAGIC_CMD # Let the user override the test with a path.
;;
*)
- lt_save_MAGIC_CMD="$MAGIC_CMD"
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_MAGIC_CMD=$MAGIC_CMD
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
dnl $ac_dummy forces splitting on constant user-supplied paths.
dnl POSIX.2 word splitting is done only on the output of word expansions,
dnl not every word. This closes a longstanding sh security hole.
ac_dummy="m4_if([$2], , $PATH, [$2])"
for ac_dir in $ac_dummy; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$1; then
- lt_cv_path_MAGIC_CMD="$ac_dir/$1"
+ if test -f "$ac_dir/$1"; then
+ lt_cv_path_MAGIC_CMD=$ac_dir/"$1"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"`
- MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
:
@@ -2974,11 +3199,11 @@
break
fi
done
- IFS="$lt_save_ifs"
- MAGIC_CMD="$lt_save_MAGIC_CMD"
+ IFS=$lt_save_ifs
+ MAGIC_CMD=$lt_save_MAGIC_CMD
;;
esac])
-MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+MAGIC_CMD=$lt_cv_path_MAGIC_CMD
if test -n "$MAGIC_CMD"; then
AC_MSG_RESULT($MAGIC_CMD)
else
@@ -2996,7 +3221,7 @@
# _LT_PATH_MAGIC
# --------------
-# find a file program which can recognize a shared library
+# find a file program that can recognize a shared library
m4_defun([_LT_PATH_MAGIC],
[_LT_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH)
if test -z "$lt_cv_path_MAGIC_CMD"; then
@@ -3023,16 +3248,16 @@
AC_ARG_WITH([gnu-ld],
[AS_HELP_STRING([--with-gnu-ld],
[assume the C compiler uses GNU ld @<:@default=no@:>@])],
- [test "$withval" = no || with_gnu_ld=yes],
+ [test no = "$withval" || with_gnu_ld=yes],
[with_gnu_ld=no])dnl
ac_prog=ld
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
# Check if gcc -print-prog-name=ld gives a path.
AC_MSG_CHECKING([for ld used by $CC])
case $host in
*-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
+ # gcc leaves a trailing carriage return, which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
@@ -3046,7 +3271,7 @@
while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do
ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"`
done
- test -z "$LD" && LD="$ac_prog"
+ test -z "$LD" && LD=$ac_prog
;;
"")
# If it fails, then pretend we aren't using GCC.
@@ -3057,37 +3282,37 @@
with_gnu_ld=unknown
;;
esac
-elif test "$with_gnu_ld" = yes; then
+elif test yes = "$with_gnu_ld"; then
AC_MSG_CHECKING([for GNU ld])
else
AC_MSG_CHECKING([for non-GNU ld])
fi
AC_CACHE_VAL(lt_cv_path_LD,
[if test -z "$LD"; then
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- lt_cv_path_LD="$ac_dir/$ac_prog"
+ lt_cv_path_LD=$ac_dir/$ac_prog
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some variants of GNU ld only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
- test "$with_gnu_ld" != no && break
+ test no != "$with_gnu_ld" && break
;;
*)
- test "$with_gnu_ld" != yes && break
+ test yes != "$with_gnu_ld" && break
;;
esac
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
else
- lt_cv_path_LD="$LD" # Let the user override the test with a path.
+ lt_cv_path_LD=$LD # Let the user override the test with a path.
fi])
-LD="$lt_cv_path_LD"
+LD=$lt_cv_path_LD
if test -n "$LD"; then
AC_MSG_RESULT($LD)
else
@@ -3141,13 +3366,13 @@
reload_cmds='$LD$reload_flag -o $output$reload_objs'
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
- if test "$GCC" != yes; then
+ if test yes != "$GCC"; then
reload_cmds=false
fi
;;
darwin*)
- if test "$GCC" = yes; then
- reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs'
+ if test yes = "$GCC"; then
+ reload_cmds='$LTCC $LTCFLAGS -nostdlib $wl-r -o $output$reload_objs'
else
reload_cmds='$LD$reload_flag -o $output$reload_objs'
fi
@@ -3158,6 +3383,43 @@
])# _LT_CMD_RELOAD
+# _LT_PATH_DD
+# -----------
+# find a working dd
+m4_defun([_LT_PATH_DD],
+[AC_CACHE_CHECK([for a working dd], [ac_cv_path_lt_DD],
+[printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+: ${lt_DD:=$DD}
+AC_PATH_PROGS_FEATURE_CHECK([lt_DD], [dd],
+[if "$ac_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && ac_cv_path_lt_DD="$ac_path_lt_DD" ac_path_lt_DD_found=:
+fi])
+rm -f conftest.i conftest2.i conftest.out])
+])# _LT_PATH_DD
+
+
+# _LT_CMD_TRUNCATE
+# ----------------
+# find command to truncate a binary pipe
+m4_defun([_LT_CMD_TRUNCATE],
+[m4_require([_LT_PATH_DD])
+AC_CACHE_CHECK([how to truncate binary pipes], [lt_cv_truncate_bin],
+[printf 0123456789abcdef0123456789abcdef >conftest.i
+cat conftest.i conftest.i >conftest2.i
+lt_cv_truncate_bin=
+if "$ac_cv_path_lt_DD" bs=32 count=1 <conftest2.i >conftest.out 2>/dev/null; then
+ cmp -s conftest.i conftest.out \
+ && lt_cv_truncate_bin="$ac_cv_path_lt_DD bs=4096 count=1"
+fi
+rm -f conftest.i conftest2.i conftest.out
+test -z "$lt_cv_truncate_bin" && lt_cv_truncate_bin="$SED -e 4q"])
+_LT_DECL([lt_truncate_bin], [lt_cv_truncate_bin], [1],
+ [Command to truncate a binary pipe])
+])# _LT_CMD_TRUNCATE
+
+
# _LT_CHECK_MAGIC_METHOD
# ----------------------
# how to check for library dependencies
@@ -3173,13 +3435,13 @@
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
+# 'unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [[regex]]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given extended regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
+# that responds to the $file_magic_cmd with a given extended regex.
+# If you have 'file' or equivalent on your system and you're not sure
+# whether 'pass_all' will *always* work, you probably want this one.
case $host_os in
aix[[4-9]]*)
@@ -3206,8 +3468,7 @@
# Base MSYS/MinGW do not provide the 'file' command needed by
# func_win32_libid shell function, so use a weaker test based on 'objdump',
# unless we find 'file', for example because we are cross-compiling.
- # func_win32_libid assumes BSD nm, so disallow it if using MS dumpbin.
- if ( test "$lt_cv_nm_interface" = "BSD nm" && file / ) >/dev/null 2>&1; then
+ if ( file / ) >/dev/null 2>&1; then
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='func_win32_libid'
else
@@ -3243,10 +3504,6 @@
fi
;;
-gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
haiku*)
lt_cv_deplibs_check_method=pass_all
;;
@@ -3285,7 +3542,7 @@
;;
# This must be glibc/ELF.
-linux* | k*bsd*-gnu | kopensolaris*-gnu)
+linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
lt_cv_deplibs_check_method=pass_all
;;
@@ -3307,8 +3564,8 @@
lt_cv_deplibs_check_method=pass_all
;;
-openbsd*)
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+openbsd* | bitrig*)
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
@@ -3361,6 +3618,9 @@
tpf*)
lt_cv_deplibs_check_method=pass_all
;;
+os2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
esac
])
@@ -3401,33 +3661,38 @@
AC_CACHE_CHECK([for BSD- or MS-compatible name lister (nm)], lt_cv_path_NM,
[if test -n "$NM"; then
# Let the user override the test.
- lt_cv_path_NM="$NM"
+ lt_cv_path_NM=$NM
else
- lt_nm_to_check="${ac_tool_prefix}nm"
+ lt_nm_to_check=${ac_tool_prefix}nm
if test -n "$ac_tool_prefix" && test "$build" = "$host"; then
lt_nm_to_check="$lt_nm_to_check nm"
fi
for lt_tmp_nm in $lt_nm_to_check; do
- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
+ lt_save_ifs=$IFS; IFS=$PATH_SEPARATOR
for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
test -z "$ac_dir" && ac_dir=.
- tmp_nm="$ac_dir/$lt_tmp_nm"
- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
+ tmp_nm=$ac_dir/$lt_tmp_nm
+ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext"; then
# Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
+ # Adding the 'sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
# Tru64's nm complains that /dev/null is an invalid object file
- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
- */dev/null* | *'Invalid file or object type'*)
+ # MSYS converts /dev/null to NUL, MinGW nm treats NUL as empty
+ case $build_os in
+ mingw*) lt_bad_file=conftest.nm/nofile ;;
+ *) lt_bad_file=/dev/null ;;
+ esac
+ case `"$tmp_nm" -B $lt_bad_file 2>&1 | sed '1q'` in
+ *$lt_bad_file* | *'Invalid file or object type'*)
lt_cv_path_NM="$tmp_nm -B"
- break
+ break 2
;;
*)
case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
*/dev/null*)
lt_cv_path_NM="$tmp_nm -p"
- break
+ break 2
;;
*)
lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
@@ -3438,21 +3703,21 @@
esac
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
done
: ${lt_cv_path_NM=no}
fi])
-if test "$lt_cv_path_NM" != "no"; then
- NM="$lt_cv_path_NM"
+if test no != "$lt_cv_path_NM"; then
+ NM=$lt_cv_path_NM
else
# Didn't find any BSD compatible name lister, look for dumpbin.
if test -n "$DUMPBIN"; then :
# Let the user override the test.
else
AC_CHECK_TOOLS(DUMPBIN, [dumpbin "link -dump"], :)
- case `$DUMPBIN -symbols /dev/null 2>&1 | sed '1q'` in
+ case `$DUMPBIN -symbols -headers /dev/null 2>&1 | sed '1q'` in
*COFF*)
- DUMPBIN="$DUMPBIN -symbols"
+ DUMPBIN="$DUMPBIN -symbols -headers"
;;
*)
DUMPBIN=:
@@ -3460,8 +3725,8 @@
esac
fi
AC_SUBST([DUMPBIN])
- if test "$DUMPBIN" != ":"; then
- NM="$DUMPBIN"
+ if test : != "$DUMPBIN"; then
+ NM=$DUMPBIN
fi
fi
test -z "$NM" && NM=nm
@@ -3507,8 +3772,8 @@
case $host_os in
cygwin* | mingw* | pw32* | cegcc*)
- # two different shell functions defined in ltmain.sh
- # decide which to use based on capabilities of $DLLTOOL
+ # two different shell functions defined in ltmain.sh;
+ # decide which one to use based on capabilities of $DLLTOOL
case `$DLLTOOL --help 2>&1` in
*--identify-strict*)
lt_cv_sharedlib_from_linklib_cmd=func_cygming_dll_for_implib
@@ -3520,7 +3785,7 @@
;;
*)
# fallback: assume linklib IS sharedlib
- lt_cv_sharedlib_from_linklib_cmd="$ECHO"
+ lt_cv_sharedlib_from_linklib_cmd=$ECHO
;;
esac
])
@@ -3547,13 +3812,28 @@
lt_cv_path_mainfest_tool=yes
fi
rm -f conftest*])
-if test "x$lt_cv_path_mainfest_tool" != xyes; then
+if test yes != "$lt_cv_path_mainfest_tool"; then
MANIFEST_TOOL=:
fi
_LT_DECL([], [MANIFEST_TOOL], [1], [Manifest tool])dnl
])# _LT_PATH_MANIFEST_TOOL
+# _LT_DLL_DEF_P([FILE])
+# ---------------------
+# True iff FILE is a Windows DLL '.def' file.
+# Keep in sync with func_dll_def_p in the libtool script
+AC_DEFUN([_LT_DLL_DEF_P],
+[dnl
+ test DEF = "`$SED -n dnl
+ -e '\''s/^[[ ]]*//'\'' dnl Strip leading whitespace
+ -e '\''/^\(;.*\)*$/d'\'' dnl Delete empty lines and comments
+ -e '\''s/^\(EXPORTS\|LIBRARY\)\([[ ]].*\)*$/DEF/p'\'' dnl
+ -e q dnl Only consider the first "real" line
+ $1`" dnl
+])# _LT_DLL_DEF_P
+
+
# LT_LIB_M
# --------
# check for math library
@@ -3565,11 +3845,11 @@
# These system don't have libm, or don't need it
;;
*-ncr-sysv4.3*)
- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
+ AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM=-lmw)
AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm")
;;
*)
- AC_CHECK_LIB(m, cos, LIBM="-lm")
+ AC_CHECK_LIB(m, cos, LIBM=-lm)
;;
esac
AC_SUBST([LIBM])
@@ -3588,7 +3868,7 @@
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
-if test "$GCC" = yes; then
+if test yes = "$GCC"; then
case $cc_basename in
nvcc*)
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -Xcompiler -fno-builtin' ;;
@@ -3640,7 +3920,7 @@
symcode='[[ABCDGISTW]]'
;;
hpux*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
symcode='[[ABCDEGRST]]'
fi
;;
@@ -3673,14 +3953,44 @@
symcode='[[ABCDGIRSTW]]' ;;
esac
+if test "$lt_cv_nm_interface" = "MS dumpbin"; then
+ # Gets list of data symbols to import.
+ lt_cv_sys_global_symbol_to_import="sed -n -e 's/^I .* \(.*\)$/\1/p'"
+ # Adjust the below global symbol transforms to fixup imported variables.
+ lt_cdecl_hook=" -e 's/^I .* \(.*\)$/extern __declspec(dllimport) char \1;/p'"
+ lt_c_name_hook=" -e 's/^I .* \(.*\)$/ {\"\1\", (void *) 0},/p'"
+ lt_c_name_lib_hook="\
+ -e 's/^I .* \(lib.*\)$/ {\"\1\", (void *) 0},/p'\
+ -e 's/^I .* \(.*\)$/ {\"lib\1\", (void *) 0},/p'"
+else
+ # Disable hooks by default.
+ lt_cv_sys_global_symbol_to_import=
+ lt_cdecl_hook=
+ lt_c_name_hook=
+ lt_c_name_lib_hook=
+fi
+
# Transform an extracted symbol line into a proper C declaration.
# Some systems (esp. on ia64) link data and code symbols differently,
# so use this general approach.
-lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
+lt_cv_sys_global_symbol_to_cdecl="sed -n"\
+$lt_cdecl_hook\
+" -e 's/^T .* \(.*\)$/extern int \1();/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/extern char \1;/p'"
# Transform an extracted symbol line into symbol name and symbol address
-lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p'"
-lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([[^ ]]*\)[[ ]]*$/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \(lib[[^ ]]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"lib\2\", (void *) \&\2},/p'"
+lt_cv_sys_global_symbol_to_c_name_address="sed -n"\
+$lt_c_name_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/p'"
+
+# Transform an extracted symbol line into symbol name with lib prefix and
+# symbol address.
+lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n"\
+$lt_c_name_lib_hook\
+" -e 's/^: \(.*\) .*$/ {\"\1\", (void *) 0},/p'"\
+" -e 's/^$symcode$symcode* .* \(lib.*\)$/ {\"\1\", (void *) \&\1},/p'"\
+" -e 's/^$symcode$symcode* .* \(.*\)$/ {\"lib\1\", (void *) \&\1},/p'"
# Handle CRLF in mingw tool chain
opt_cr=
@@ -3698,21 +4008,24 @@
# Write the raw and C identifiers.
if test "$lt_cv_nm_interface" = "MS dumpbin"; then
- # Fake it for dumpbin and say T for any non-static function
- # and D for any global variable.
+ # Fake it for dumpbin and say T for any non-static function,
+ # D for any global variable and I for any imported variable.
# Also find C++ and __fastcall symbols from MSVC++,
# which start with @ or ?.
lt_cv_sys_global_symbol_pipe="$AWK ['"\
" {last_section=section; section=\$ 3};"\
" /^COFF SYMBOL TABLE/{for(i in hide) delete hide[i]};"\
" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\
+" /^ *Symbol name *: /{split(\$ 0,sn,\":\"); si=substr(sn[2],2)};"\
+" /^ *Type *: code/{print \"T\",si,substr(si,length(prfx))};"\
+" /^ *Type *: data/{print \"I\",si,substr(si,length(prfx))};"\
" \$ 0!~/External *\|/{next};"\
" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\
" {if(hide[section]) next};"\
-" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\
-" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\
-" s[1]~/^[@?]/{print s[1], s[1]; next};"\
-" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\
+" {f=\"D\"}; \$ 0~/\(\).*\|/{f=\"T\"};"\
+" {split(\$ 0,a,/\||\r/); split(a[2],s)};"\
+" s[1]~/^[@?]/{print f,s[1],s[1]; next};"\
+" s[1]~prfx {split(s[1],t,\"@\"); print f,t[1],substr(t[1],length(prfx))}"\
" ' prfx=^$ac_symprfx]"
else
lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'"
@@ -3752,11 +4065,11 @@
if $GREP ' nm_test_func$' "$nlist" >/dev/null; then
cat <<_LT_EOF > conftest.$ac_ext
/* Keep this code in sync between libtool.m4, ltmain, lt_system.h, and tests. */
-#if defined(_WIN32) || defined(__CYGWIN__) || defined(_WIN32_WCE)
-/* DATA imports from DLLs on WIN32 con't be const, because runtime
+#if defined _WIN32 || defined __CYGWIN__ || defined _WIN32_WCE
+/* DATA imports from DLLs on WIN32 can't be const, because runtime
relocations are performed -- see ld's documentation on pseudo-relocs. */
# define LT@&t@_DLSYM_CONST
-#elif defined(__osf__)
+#elif defined __osf__
/* This system does not cope well with relocations in const data. */
# define LT@&t@_DLSYM_CONST
#else
@@ -3782,7 +4095,7 @@
{
{ "@PROGRAM@", (void *) 0 },
_LT_EOF
- $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
+ $SED "s/^$symcode$symcode* .* \(.*\)$/ {\"\1\", (void *) \&\1},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext
cat <<\_LT_EOF >> conftest.$ac_ext
{0, (void *) 0}
};
@@ -3802,9 +4115,9 @@
mv conftest.$ac_objext conftstm.$ac_objext
lt_globsym_save_LIBS=$LIBS
lt_globsym_save_CFLAGS=$CFLAGS
- LIBS="conftstm.$ac_objext"
+ LIBS=conftstm.$ac_objext
CFLAGS="$CFLAGS$_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)"
- if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then
+ if AC_TRY_EVAL(ac_link) && test -s conftest$ac_exeext; then
pipe_works=yes
fi
LIBS=$lt_globsym_save_LIBS
@@ -3825,7 +4138,7 @@
rm -rf conftest* conftst*
# Do not use the global_symbol_pipe unless it works.
- if test "$pipe_works" = yes; then
+ if test yes = "$pipe_works"; then
break
else
lt_cv_sys_global_symbol_pipe=
@@ -3852,12 +4165,16 @@
[Take the output of nm and produce a listing of raw symbols and C names])
_LT_DECL([global_symbol_to_cdecl], [lt_cv_sys_global_symbol_to_cdecl], [1],
[Transform the output of nm in a proper C declaration])
+_LT_DECL([global_symbol_to_import], [lt_cv_sys_global_symbol_to_import], [1],
+ [Transform the output of nm into a list of symbols to manually relocate])
_LT_DECL([global_symbol_to_c_name_address],
[lt_cv_sys_global_symbol_to_c_name_address], [1],
[Transform the output of nm in a C name address pair])
_LT_DECL([global_symbol_to_c_name_address_lib_prefix],
[lt_cv_sys_global_symbol_to_c_name_address_lib_prefix], [1],
[Transform the output of nm in a C name address pair when lib prefix is needed])
+_LT_DECL([nm_interface], [lt_cv_nm_interface], [1],
+ [The name lister interface])
_LT_DECL([], [nm_file_list_spec], [1],
[Specify filename containing input files for $NM])
]) # _LT_CMD_GLOBAL_SYMBOLS
@@ -3873,17 +4190,18 @@
m4_if([$1], [CXX], [
# C++ specific cases for pic, static, wl, etc.
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
case $host_os in
aix*)
# All AIX code is PIC.
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
amigaos*)
@@ -3894,8 +4212,8 @@
;;
m68k)
# FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
+ # adding the '-m68020' flag to GCC prevents building anything better,
+ # like '-m68040'.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
;;
esac
@@ -3911,6 +4229,11 @@
# (--disable-auto-import) libraries
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ case $host_os in
+ os2*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+ ;;
+ esac
;;
darwin* | rhapsody*)
# PIC is the default on this platform
@@ -3960,7 +4283,7 @@
case $host_os in
aix[[4-9]]*)
# All AIX code is PIC.
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
else
@@ -4001,14 +4324,14 @@
case $cc_basename in
CC*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
- if test "$host_cpu" != ia64; then
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
+ if test ia64 != "$host_cpu"; then
_LT_TAGVAR(lt_prog_compiler_pic, $1)='+Z'
fi
;;
aCC*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
case $host_cpu in
hppa*64*|ia64*)
# +Z the default
@@ -4037,7 +4360,7 @@
;;
esac
;;
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
KCC*)
# KAI C++ Compiler
@@ -4045,7 +4368,7 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
ecpc* )
- # old Intel C++ for x86_64 which still supported -KPIC.
+ # old Intel C++ for x86_64, which still supported -KPIC.
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
@@ -4190,17 +4513,18 @@
fi
],
[
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
case $host_os in
aix*)
# All AIX code is PIC.
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
;;
amigaos*)
@@ -4211,8 +4535,8 @@
;;
m68k)
# FIXME: we need at least 68020 code to build shared libraries, but
- # adding the `-m68020' flag to GCC prevents building anything better,
- # like `-m68040'.
+ # adding the '-m68020' flag to GCC prevents building anything better,
+ # like '-m68040'.
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4'
;;
esac
@@ -4229,6 +4553,11 @@
# (--disable-auto-import) libraries
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ case $host_os in
+ os2*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+ ;;
+ esac
;;
darwin* | rhapsody*)
@@ -4299,7 +4628,7 @@
case $host_os in
aix*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# AIX 5 now supports IA64 processor
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
else
@@ -4307,11 +4636,30 @@
fi
;;
+ darwin* | rhapsody*)
+ # PIC is the default on this platform
+ # Common symbols not allowed in MH_DYLIB files
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common'
+ case $cc_basename in
+ nagfor*)
+ # NAG Fortran compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,-Wl,,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
+ ;;
+ esac
+ ;;
+
mingw* | cygwin* | pw32* | os2* | cegcc*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
m4_if([$1], [GCJ], [],
[_LT_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT'])
+ case $host_os in
+ os2*)
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-static'
+ ;;
+ esac
;;
hpux9* | hpux10* | hpux11*)
@@ -4327,7 +4675,7 @@
;;
esac
# Is there a better lt_prog_compiler_static that works with the bundled CC?
- _LT_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='$wl-a ${wl}archive'
;;
irix5* | irix6* | nonstopux*)
@@ -4336,9 +4684,9 @@
_LT_TAGVAR(lt_prog_compiler_static, $1)='-non_shared'
;;
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
- # old Intel for x86_64 which still supported -KPIC.
+ # old Intel for x86_64, which still supported -KPIC.
ecc*)
_LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC'
@@ -4363,6 +4711,12 @@
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-PIC'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
;;
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ _LT_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
+ _LT_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC'
+ _LT_TAGVAR(lt_prog_compiler_static, $1)='-static'
+ ;;
pgcc* | pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group compilers (*not* the Pentium gcc compiler,
# which looks to be a dead project)
@@ -4460,7 +4814,7 @@
;;
sysv4*MP*)
- if test -d /usr/nec ;then
+ if test -d /usr/nec; then
_LT_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic'
_LT_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
fi
@@ -4489,7 +4843,7 @@
fi
])
case $host_os in
- # For platforms which do not support PIC, -DPIC is meaningless:
+ # For platforms that do not support PIC, -DPIC is meaningless:
*djgpp*)
_LT_TAGVAR(lt_prog_compiler_pic, $1)=
;;
@@ -4555,17 +4909,21 @@
case $host_os in
aix[[4-9]]*)
# If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- # Also, AIX nm treats weak defined symbols like other global defined
- # symbols, whereas GNU nm marks them as "W".
+ # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+ # Without the "-l" option, or with the "-B" option, AIX nm treats
+ # weak defined symbols like other global defined symbols, whereas
+ # GNU nm marks them as "W".
+ # While the 'weak' keyword is ignored in the Export File, we need
+ # it in the Import File for the 'aix-soname' feature, so we have
+ # to replace the "-B" option with "-P" for AIX nm.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
else
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
fi
;;
pw32*)
- _LT_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"
+ _LT_TAGVAR(export_symbols_cmds, $1)=$ltdll_cmds
;;
cygwin* | mingw* | cegcc*)
case $cc_basename in
@@ -4611,9 +4969,9 @@
# included in the symbol list
_LT_TAGVAR(include_expsyms, $1)=
# exclude_expsyms can be an extended regexp of symbols to exclude
- # it will be wrapped by ` (' and `)$', so one must not match beginning or
- # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
- # as well as any symbol that contains `d'.
+ # it will be wrapped by ' (' and ')$', so one must not match beginning or
+ # end of line. Example: 'a|bc|.*d.*' will exclude the symbols 'a' and 'bc',
+ # as well as any symbol that contains 'd'.
_LT_TAGVAR(exclude_expsyms, $1)=['_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*']
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
@@ -4629,7 +4987,7 @@
# FIXME: the MSVC++ port hasn't been tested in a loooong time
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
- if test "$GCC" != yes; then
+ if test yes != "$GCC"; then
with_gnu_ld=no
fi
;;
@@ -4637,7 +4995,7 @@
# we just hope/assume this is gcc and not c89 (= MSVC++)
with_gnu_ld=yes
;;
- openbsd*)
+ openbsd* | bitrig*)
with_gnu_ld=no
;;
esac
@@ -4647,7 +5005,7 @@
# On some targets, GNU ld is compatible enough with the native linker
# that we're better off using the native interface for both.
lt_use_gnu_ld_interface=no
- if test "$with_gnu_ld" = yes; then
+ if test yes = "$with_gnu_ld"; then
case $host_os in
aix*)
# The AIX port of GNU ld has always aspired to compatibility
@@ -4669,24 +5027,24 @@
esac
fi
- if test "$lt_use_gnu_ld_interface" = yes; then
+ if test yes = "$lt_use_gnu_ld_interface"; then
# If archive_cmds runs LD, not CC, wlarc should be empty
- wlarc='${wl}'
+ wlarc='$wl'
# Set some defaults for GNU ld with shared library support. These
# are reset later if shared libraries are not supported. Putting them
# here allows them to be overridden if necessary.
runpath_var=LD_RUN_PATH
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
# ancient GNU ld didn't support --whole-archive et. al.
if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=
fi
supports_anon_versioning=no
- case `$LD -v 2>&1` in
+ case `$LD -v | $SED -e 's/([^)]\+)\s\+//' 2>&1` in
*GNU\ gold*) supports_anon_versioning=yes ;;
*\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
*\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
@@ -4699,7 +5057,7 @@
case $host_os in
aix[[3-9]]*)
# On AIX/PPC, the GNU linker is very broken
- if test "$host_cpu" != ia64; then
+ if test ia64 != "$host_cpu"; then
_LT_TAGVAR(ld_shlibs, $1)=no
cat <<_LT_EOF 1>&2
@@ -4718,7 +5076,7 @@
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)=''
;;
m68k)
@@ -4734,7 +5092,7 @@
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
- _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -4744,7 +5102,7 @@
# _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
@@ -4752,61 +5110,89 @@
_LT_TAGVAR(exclude_expsyms, $1)=['[_]+GLOBAL_OFFSET_TABLE_|[_]+GLOBAL__[FID]_.*|[_]+head_[A-Za-z0-9_]+_dll|[A-Za-z0-9_]+_dll_iname']
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file, use it as
+ # is; otherwise, prepend EXPORTS...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
haiku*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
+ os2*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ shrext_cmds=.dll
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+
interix[[3-9]]*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
gnu* | linux* | tpf* | k*bsd*-gnu | kopensolaris*-gnu)
tmp_diet=no
- if test "$host_os" = linux-dietlibc; then
+ if test linux-dietlibc = "$host_os"; then
case $cc_basename in
diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn)
esac
fi
if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
- && test "$tmp_diet" = no
+ && test no = "$tmp_diet"
then
tmp_addflag=' $pic_flag'
tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag'
;;
pgf77* | pgf90* | pgf95* | pgfortran*)
# Portland Group f77 and f90 compilers
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
tmp_addflag=' $pic_flag -Mnomain' ;;
ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64
tmp_addflag=' -i_dynamic' ;;
@@ -4817,42 +5203,47 @@
lf95*) # Lahey Fortran 8.1
_LT_TAGVAR(whole_archive_flag_spec, $1)=
tmp_sharedflag='--shared' ;;
+ nagfor*) # NAGFOR 5.3
+ tmp_sharedflag='-Wl,-shared' ;;
xl[[cC]]* | bgxl[[cC]]* | mpixl[[cC]]*) # IBM XL C 8.0 on PPC (deal with xlf below)
tmp_sharedflag='-qmkshrobj'
tmp_addflag= ;;
nvcc*) # Cuda Compiler Driver 2.2
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
;;
esac
case `$CC -V 2>&1 | sed 5q` in
*Sun\ C*) # Sun C 5.9
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
tmp_sharedflag='-G' ;;
*Sun\ F*) # Sun Fortran 8.3
tmp_sharedflag='-G' ;;
esac
- _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ if test yes = "$supports_anon_versioning"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
fi
case $cc_basename in
+ tcc*)
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='-rdynamic'
+ ;;
xlf* | bgf* | bgxlf* | mpixlf*)
# IBM XL Fortran 10.1 on PPC cannot create shared libs itself
_LT_TAGVAR(whole_archive_flag_spec, $1)='--whole-archive$convenience --no-whole-archive'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ if test yes = "$supports_anon_versioning"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $LD -shared $libobjs $deplibs $linker_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib'
fi
;;
esac
@@ -4866,8 +5257,8 @@
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
fi
;;
@@ -4885,8 +5276,8 @@
_LT_EOF
elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -4898,7 +5289,7 @@
_LT_TAGVAR(ld_shlibs, $1)=no
cat <<_LT_EOF 1>&2
-*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not
+*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 cannot
*** reliably create shared libraries on SCO systems. Therefore, libtool
*** is disabling shared libraries support. We urge you to upgrade GNU
*** binutils to release 2.16.91.0.3 or newer. Another option is to modify
@@ -4913,9 +5304,9 @@
# DT_RUNPATH tag from executables and libraries. But doing so
# requires that you compile everything twice, which is a pain.
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -4932,15 +5323,15 @@
*)
if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
;;
esac
- if test "$_LT_TAGVAR(ld_shlibs, $1)" = no; then
+ if test no = "$_LT_TAGVAR(ld_shlibs, $1)"; then
runpath_var=
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)=
_LT_TAGVAR(export_dynamic_flag_spec, $1)=
@@ -4956,7 +5347,7 @@
# Note: this linker hardcodes the directories in LIBPATH if there
# are no directories specified by -L.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
- if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then
+ if test yes = "$GCC" && test -z "$lt_prog_compiler_static"; then
# Neither direct hardcoding nor static linking is supported with a
# broken collect2.
_LT_TAGVAR(hardcode_direct, $1)=unsupported
@@ -4964,34 +5355,57 @@
;;
aix[[4-9]]*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
- no_entry_flag=""
+ no_entry_flag=
else
# If we're using GNU nm, then we don't want the "-C" option.
- # -C means demangle to AIX nm, but means don't demangle with GNU nm
- # Also, AIX nm treats weak defined symbols like other global
- # defined symbols, whereas GNU nm marks them as "W".
+ # -C means demangle to GNU nm, but means don't demangle to AIX nm.
+ # Without the "-l" option, or with the "-B" option, AIX nm treats
+ # weak defined symbols like other global defined symbols, whereas
+ # GNU nm marks them as "W".
+ # While the 'weak' keyword is ignored in the Export File, we need
+ # it in the Import File for the 'aix-soname' feature, so we have
+ # to replace the "-B" option with "-P" for AIX nm.
if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W")) && ([substr](\$ 3,1,1) != ".")) { if (\$ 2 == "W") { print \$ 3 " weak" } else { print \$ 3 } } }'\'' | sort -u > $export_symbols'
else
- _LT_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && ([substr](\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols'
+ _LT_TAGVAR(export_symbols_cmds, $1)='`func_echo_all $NM | $SED -e '\''s/B\([[^B]]*\)$/P\1/'\''` -PCpgl $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B") || (\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) && ([substr](\$ 1,1,1) != ".")) { if ((\$ 2 == "W") || (\$ 2 == "V") || (\$ 2 == "Z")) { print \$ 1 " weak" } else { print \$ 1 } } }'\'' | sort -u > $export_symbols'
fi
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
+ # have runtime linking enabled, and use it for executables.
+ # For shared libraries, we enable/disable runtime linking
+ # depending on the kind of the shared library created -
+ # when "with_aix_soname,aix_use_runtimelinking" is:
+ # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
+ # "aix,yes" lib.so shared, rtl:yes, for executables
+ # lib.a static archive
+ # "both,no" lib.so.V(shr.o) shared, rtl:yes
+ # lib.a(lib.so.V) shared, rtl:no, for executables
+ # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a(lib.so.V) shared, rtl:no
+ # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a static archive
case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
for ld_flag in $LDFLAGS; do
- if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then
+ if (test x-brtl = "x$ld_flag" || test x-Wl,-brtl = "x$ld_flag"); then
aix_use_runtimelinking=yes
break
fi
done
+ if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # With aix-soname=svr4, we create the lib.so.V shared archives only,
+ # so we don't have lib.a shared libs to link our executables.
+ # We have to force runtime linking in this case.
+ aix_use_runtimelinking=yes
+ LDFLAGS="$LDFLAGS -Wl,-brtl"
+ fi
;;
esac
@@ -5010,13 +5424,21 @@
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+ _LT_TAGVAR(file_list_spec, $1)='$wl-f,'
+ case $with_aix_soname,$aix_use_runtimelinking in
+ aix,*) ;; # traditional, no import file
+ svr4,* | *,yes) # use import file
+ # The Import File defines what to hardcode.
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+ ;;
+ esac
- if test "$GCC" = yes; then
+ if test yes = "$GCC"; then
case $host_os in aix4.[[012]]|aix4.[[012]].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
+ collect2name=`$CC -print-prog-name=collect2`
if test -f "$collect2name" &&
strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
@@ -5035,61 +5457,80 @@
;;
esac
shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag="$shared_flag "'$wl-G'
fi
+ # Need to ensure runtime linking is disabled for the traditional
+ # shared library, or the linker may eventually find shared libraries
+ # /with/ Import File - we do not want to mix them.
+ shared_flag_aix='-shared'
+ shared_flag_svr4='-shared $wl-G'
else
# not using gcc
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag='$wl-G'
else
- shared_flag='${wl}-bM:SRE'
+ shared_flag='$wl-bM:SRE'
fi
+ shared_flag_aix='$wl-bM:SRE'
+ shared_flag_svr4='$wl-G'
fi
fi
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to export.
_LT_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
+ if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
_LT_TAGVAR(allow_undefined_flag, $1)='-berok'
# Determine the default libpath from the value encoded in an
# empty executable.
_LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
else
- if test "$host_cpu" = ia64; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ if test ia64 = "$host_cpu"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
_LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an
# empty executable.
_LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- if test "$with_gnu_ld" = yes; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
+ if test yes = "$with_gnu_ld"; then
# We only use this code for GNU lds that support --whole-archive.
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
else
# Exported symbols can be pulled into shared objects from archives
_LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared libraries.
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+ # -brtl affects multiple linker settings, -berok does not and is overridden later
+ compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
+ if test svr4 != "$with_aix_soname"; then
+ # This is similar to how AIX traditionally builds its shared libraries.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+ fi
+ if test aix != "$with_aix_soname"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+ else
+ # used by -dlpreopen to get the symbols
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
+ fi
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
fi
fi
;;
@@ -5098,7 +5539,7 @@
case $host_cpu in
powerpc)
# see comment about AmigaOS4 .so support
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)=''
;;
m68k)
@@ -5128,16 +5569,17 @@
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
+ shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
- _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- sed -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
- else
- sed -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
- fi~
- $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
- linknames='
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp "$export_symbols" "$output_objdir/$soname.def";
+ echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+ else
+ $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
# The linker will not automatically build a static lib if we build a DLL.
# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
@@ -5146,18 +5588,18 @@
# Don't use ranlib
_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
- lt_tool_outputfile="@TOOL_OUTPUT@"~
- case $lt_outputfile in
- *.exe|*.EXE) ;;
- *)
- lt_outputfile="$lt_outputfile.exe"
- lt_tool_outputfile="$lt_tool_outputfile.exe"
- ;;
- esac~
- if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
- $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
- $RM "$lt_outputfile.manifest";
- fi'
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile=$lt_outputfile.exe
+ lt_tool_outputfile=$lt_tool_outputfile.exe
+ ;;
+ esac~
+ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
;;
*)
# Assume MSVC wrapper
@@ -5166,7 +5608,7 @@
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
+ shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
_LT_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `func_echo_all "$deplibs" | $SED '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
@@ -5216,33 +5658,33 @@
;;
hpux9*)
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
else
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
fi
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_direct, $1)=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
;;
hpux10*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes,no = "$GCC,$with_gnu_ld"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
else
_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
fi
- if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
_LT_TAGVAR(hardcode_minus_L, $1)=yes
@@ -5250,25 +5692,25 @@
;;
hpux11*)
- if test "$GCC" = yes && test "$with_gnu_ld" = no; then
+ if test yes,no = "$GCC,$with_gnu_ld"; then
case $host_cpu in
hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
else
case $host_cpu in
hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
m4_if($1, [], [
@@ -5276,14 +5718,14 @@
# (HP92453-01 A.11.01.20 doesn't, HP92453-01 B.11.X.35175-35176.GP does)
_LT_LINKER_OPTION([if $CC understands -b],
_LT_TAGVAR(lt_cv_prog_compiler__b, $1), [-b],
- [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'],
[_LT_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'])],
- [_LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
+ [_LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $libobjs $deplibs $compiler_flags'])
;;
esac
fi
- if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
case $host_cpu in
@@ -5294,7 +5736,7 @@
*)
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
@@ -5305,16 +5747,16 @@
;;
irix5* | irix6* | nonstopux*)
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
# Try to use the -exported_symbol ld option, if it does not
# work, assume that -exports_file does not work either and
# implicitly export all symbols.
# This should be the same for all languages, so no per-tag cache variable.
AC_CACHE_CHECK([whether the $host_os linker accepts -exported_symbol],
[lt_cv_irix_exported_symbol],
- [save_LDFLAGS="$LDFLAGS"
- LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null"
+ [save_LDFLAGS=$LDFLAGS
+ LDFLAGS="$LDFLAGS -shared $wl-exported_symbol ${wl}foo $wl-update_registry $wl/dev/null"
AC_LINK_IFELSE(
[AC_LANG_SOURCE(
[AC_LANG_CASE([C], [[int foo (void) { return 0; }]],
@@ -5327,21 +5769,31 @@
end]])])],
[lt_cv_irix_exported_symbol=yes],
[lt_cv_irix_exported_symbol=no])
- LDFLAGS="$save_LDFLAGS"])
- if test "$lt_cv_irix_exported_symbol" = yes; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib'
+ LDFLAGS=$save_LDFLAGS])
+ if test yes = "$lt_cv_irix_exported_symbol"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations $wl-exports_file $wl$export_symbols -o $lib'
fi
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -exports_file $export_symbols -o $lib'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(inherit_rpath, $1)=yes
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
+ linux*)
+ case $cc_basename in
+ tcc*)
+ # Fabrice Bellard et al's Tiny C Compiler
+ _LT_TAGVAR(ld_shlibs, $1)=yes
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ ;;
+ esac
+ ;;
+
netbsd*)
if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then
_LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
@@ -5356,7 +5808,7 @@
newsos6)
_LT_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(hardcode_direct, $1)=yes
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
;;
@@ -5364,27 +5816,19 @@
*nto* | *qnx*)
;;
- openbsd*)
+ openbsd* | bitrig*)
if test -f /usr/libexec/ld.so; then
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
- if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
+ if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`"; then
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags $wl-retain-symbols-file,$export_symbols'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
else
- case $host_os in
- openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*)
- _LT_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- ;;
- *)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- ;;
- esac
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
fi
else
_LT_TAGVAR(ld_shlibs, $1)=no
@@ -5395,33 +5839,53 @@
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
_LT_TAGVAR(hardcode_minus_L, $1)=yes
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
- _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~echo DATA >> $output_objdir/$libname.def~echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def'
- _LT_TAGVAR(old_archive_from_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
+ shrext_cmds=.dll
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
;;
osf3*)
- if test "$GCC" = yes; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
else
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)='no'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
;;
osf4* | osf5*) # as osf3* with the addition of -msym flag
- if test "$GCC" = yes; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $pic_flag $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $pic_flag $libobjs $deplibs $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
else
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~
- $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp'
+ $CC -shared$allow_undefined_flag $wl-input $wl$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~$RM $lib.exp'
# Both c and cxx compiler support -rpath directly
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
@@ -5432,24 +5896,24 @@
solaris*)
_LT_TAGVAR(no_undefined_flag, $1)=' -z defs'
- if test "$GCC" = yes; then
- wlarc='${wl}'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ wlarc='$wl'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $wl-z ${wl}text $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared $pic_flag ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -shared $pic_flag $wl-z ${wl}text $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
else
case `$CC -V 2>&1` in
*"Compilers 5.0"*)
wlarc=''
- _LT_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$LD -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $linker_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
+ $LD -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp'
;;
*)
- wlarc='${wl}'
- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ wlarc='$wl'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h $soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
+ $CC -G$allow_undefined_flag -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp'
;;
esac
fi
@@ -5459,11 +5923,11 @@
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
# The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'. GCC discards it without `$wl',
+ # but understands '-z linker_flag'. GCC discards it without '$wl',
# but is careful enough not to reorder.
# Supported since Solaris 2.6 (maybe 2.5.1?)
- if test "$GCC" = yes; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
fi
@@ -5473,10 +5937,10 @@
;;
sunos4*)
- if test "x$host_vendor" = xsequent; then
+ if test sequent = "$host_vendor"; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h $soname -o $lib $libobjs $deplibs $compiler_flags'
else
_LT_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
@@ -5525,43 +5989,43 @@
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
runpath_var='LD_RUN_PATH'
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
+ # Note: We CANNOT use -z defs as we might desire, because we do not
# link with -lc, and that would cause any symbols used from libc to
# always be unresolved, which means just about no library would
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
runpath_var='LD_RUN_PATH'
- if test "$GCC" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ if test yes = "$GCC"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
fi
;;
@@ -5576,17 +6040,17 @@
;;
esac
- if test x$host_vendor = xsni; then
+ if test sni = "$host_vendor"; then
case $host in
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Blargedynsym'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Blargedynsym'
;;
esac
fi
fi
])
AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
-test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
_LT_TAGVAR(with_gnu_ld, $1)=$with_gnu_ld
@@ -5603,7 +6067,7 @@
# Assume -lc should be added
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- if test "$enable_shared" = yes && test "$GCC" = yes; then
+ if test yes,yes = "$GCC,$enable_shared"; then
case $_LT_TAGVAR(archive_cmds, $1) in
*'~'*)
# FIXME: we may have to deal with multi-command sequences.
@@ -5683,12 +6147,12 @@
_LT_TAGDECL([], [hardcode_libdir_separator], [1],
[Whether we need a single "-rpath" flag with a separated argument])
_LT_TAGDECL([], [hardcode_direct], [0],
- [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
DIR into the resulting binary])
_LT_TAGDECL([], [hardcode_direct_absolute], [0],
- [Set to "yes" if using DIR/libNAME${shared_ext} during linking hardcodes
+ [Set to "yes" if using DIR/libNAME$shared_ext during linking hardcodes
DIR into the resulting binary and the resulting library dependency is
- "absolute", i.e impossible to change by setting ${shlibpath_var} if the
+ "absolute", i.e impossible to change by setting $shlibpath_var if the
library is relocated])
_LT_TAGDECL([], [hardcode_minus_L], [0],
[Set to "yes" if using the -LDIR flag during linking hardcodes DIR
@@ -5729,10 +6193,10 @@
# ------------------------
# Ensure that the configuration variables for a C compiler are suitably
# defined. These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
+# the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_C_CONFIG],
[m4_require([_LT_DECL_EGREP])dnl
-lt_save_CC="$CC"
+lt_save_CC=$CC
AC_LANG_PUSH(C)
# Source file extension for C test sources.
@@ -5772,18 +6236,18 @@
LT_SYS_DLOPEN_SELF
_LT_CMD_STRIPLIB
- # Report which library types will actually be built
+ # Report what library types will actually be built
AC_MSG_CHECKING([if libtool supports shared libraries])
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
- test "$can_build_shared" = "no" && enable_shared=no
+ test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
- test "$enable_shared" = yes && enable_static=no
+ test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
@@ -5791,8 +6255,12 @@
;;
aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
fi
;;
esac
@@ -5800,13 +6268,13 @@
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
+ test yes = "$enable_shared" || enable_static=yes
AC_MSG_RESULT([$enable_static])
_LT_CONFIG($1)
fi
AC_LANG_POP
-CC="$lt_save_CC"
+CC=$lt_save_CC
])# _LT_LANG_C_CONFIG
@@ -5814,14 +6282,14 @@
# --------------------------
# Ensure that the configuration variables for a C++ compiler are suitably
# defined. These variables are subsequently used by _LT_CONFIG to write
-# the compiler configuration to `libtool'.
+# the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_CXX_CONFIG],
[m4_require([_LT_FILEUTILS_DEFAULTS])dnl
m4_require([_LT_DECL_EGREP])dnl
m4_require([_LT_PATH_MANIFEST_TOOL])dnl
-if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
- ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
- (test "X$CXX" != "Xg++"))) ; then
+if test -n "$CXX" && ( test no != "$CXX" &&
+ ( (test g++ = "$CXX" && `g++ -v >/dev/null 2>&1` ) ||
+ (test g++ != "$CXX"))); then
AC_PROG_CXXCPP
else
_lt_caught_CXX_error=yes
@@ -5863,7 +6331,7 @@
# the CXX compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_caught_CXX_error" != yes; then
+if test yes != "$_lt_caught_CXX_error"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="int some_variable = 0;"
@@ -5905,35 +6373,35 @@
if test -n "$compiler"; then
# We don't want -fno-exception when compiling C++ code, so set the
# no_builtin_flag separately
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin'
else
_LT_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=
fi
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
# Set up default GNU C++ configuration
LT_PATH_LD
# Check if GNU C++ uses GNU ld as the underlying linker, since the
# archiving commands below assume that GNU ld is being used.
- if test "$with_gnu_ld" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ if test yes = "$with_gnu_ld"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC $pic_flag -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
# If archive_cmds runs LD, not CC, wlarc should be empty
# XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
# investigate it a little bit more. (MM)
- wlarc='${wl}'
+ wlarc='$wl'
# ancient GNU ld didn't support --whole-archive et. al.
if eval "`$CC -print-prog-name=ld` --help 2>&1" |
$GREP 'no-whole-archive' > /dev/null; then
- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
else
_LT_TAGVAR(whole_archive_flag_spec, $1)=
fi
@@ -5969,18 +6437,30 @@
_LT_TAGVAR(ld_shlibs, $1)=no
;;
aix[[4-9]]*)
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
- no_entry_flag=""
+ no_entry_flag=
else
aix_use_runtimelinking=no
# Test if we are trying to use run time linking or normal
# AIX style linking. If -brtl is somewhere in LDFLAGS, we
- # need to do runtime linking.
+ # have runtime linking enabled, and use it for executables.
+ # For shared libraries, we enable/disable runtime linking
+ # depending on the kind of the shared library created -
+ # when "with_aix_soname,aix_use_runtimelinking" is:
+ # "aix,no" lib.a(lib.so.V) shared, rtl:no, for executables
+ # "aix,yes" lib.so shared, rtl:yes, for executables
+ # lib.a static archive
+ # "both,no" lib.so.V(shr.o) shared, rtl:yes
+ # lib.a(lib.so.V) shared, rtl:no, for executables
+ # "both,yes" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a(lib.so.V) shared, rtl:no
+ # "svr4,*" lib.so.V(shr.o) shared, rtl:yes, for executables
+ # lib.a static archive
case $host_os in aix4.[[23]]|aix4.[[23]].*|aix[[5-9]]*)
for ld_flag in $LDFLAGS; do
case $ld_flag in
@@ -5990,6 +6470,13 @@
;;
esac
done
+ if test svr4,no = "$with_aix_soname,$aix_use_runtimelinking"; then
+ # With aix-soname=svr4, we create the lib.so.V shared archives only,
+ # so we don't have lib.a shared libs to link our executables.
+ # We have to force runtime linking in this case.
+ aix_use_runtimelinking=yes
+ LDFLAGS="$LDFLAGS -Wl,-brtl"
+ fi
;;
esac
@@ -6008,13 +6495,21 @@
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(file_list_spec, $1)='${wl}-f,'
+ _LT_TAGVAR(file_list_spec, $1)='$wl-f,'
+ case $with_aix_soname,$aix_use_runtimelinking in
+ aix,*) ;; # no import file
+ svr4,* | *,yes) # use import file
+ # The Import File defines what to hardcode.
+ _LT_TAGVAR(hardcode_direct, $1)=no
+ _LT_TAGVAR(hardcode_direct_absolute, $1)=no
+ ;;
+ esac
- if test "$GXX" = yes; then
+ if test yes = "$GXX"; then
case $host_os in aix4.[[012]]|aix4.[[012]].*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
- collect2name=`${CC} -print-prog-name=collect2`
+ collect2name=`$CC -print-prog-name=collect2`
if test -f "$collect2name" &&
strings "$collect2name" | $GREP resolve_lib_name >/dev/null
then
@@ -6032,64 +6527,84 @@
fi
esac
shared_flag='-shared'
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag="$shared_flag "'${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag=$shared_flag' $wl-G'
fi
+ # Need to ensure runtime linking is disabled for the traditional
+ # shared library, or the linker may eventually find shared libraries
+ # /with/ Import File - we do not want to mix them.
+ shared_flag_aix='-shared'
+ shared_flag_svr4='-shared $wl-G'
else
# not using gcc
- if test "$host_cpu" = ia64; then
+ if test ia64 = "$host_cpu"; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
- if test "$aix_use_runtimelinking" = yes; then
- shared_flag='${wl}-G'
+ if test yes = "$aix_use_runtimelinking"; then
+ shared_flag='$wl-G'
else
- shared_flag='${wl}-bM:SRE'
+ shared_flag='$wl-bM:SRE'
fi
+ shared_flag_aix='$wl-bM:SRE'
+ shared_flag_svr4='$wl-G'
fi
fi
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-bexpall'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-bexpall'
# It seems that -bexpall does not export symbols beginning with
# underscore (_), so it is better to generate a list of symbols to
# export.
_LT_TAGVAR(always_export_symbols, $1)=yes
- if test "$aix_use_runtimelinking" = yes; then
+ if test aix,yes = "$with_aix_soname,$aix_use_runtimelinking"; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(allow_undefined_flag, $1)='-berok'
+ # The "-G" linker flag allows undefined symbols.
+ _LT_TAGVAR(no_undefined_flag, $1)='-bernotok'
# Determine the default libpath from the value encoded in an empty
# executable.
_LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then func_echo_all "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $deplibs $wl'$no_entry_flag' $compiler_flags `if test -n "$allow_undefined_flag"; then func_echo_all "$wl$allow_undefined_flag"; else :; fi` $wl'$exp_sym_flag:\$export_symbols' '$shared_flag
else
- if test "$host_cpu" = ia64; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib'
+ if test ia64 = "$host_cpu"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $libdir:/usr/lib:/lib'
_LT_TAGVAR(allow_undefined_flag, $1)="-z nodefs"
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols"
+ _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\$wl$no_entry_flag"' $compiler_flags $wl$allow_undefined_flag '"\$wl$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an
# empty executable.
_LT_SYS_MODULE_PATH_AIX([$1])
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath"
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok'
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok'
- if test "$with_gnu_ld" = yes; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' $wl-bernotok'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-berok'
+ if test yes = "$with_gnu_ld"; then
# We only use this code for GNU lds that support --whole-archive.
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
else
# Exported symbols can be pulled into shared objects from archives
_LT_TAGVAR(whole_archive_flag_spec, $1)='$convenience'
fi
_LT_TAGVAR(archive_cmds_need_lc, $1)=yes
- # This is similar to how AIX traditionally builds its shared
- # libraries.
- _LT_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$RM -r $output_objdir/$realname.d~$MKDIR $output_objdir/$realname.d'
+ # -brtl affects multiple linker settings, -berok does not and is overridden later
+ compiler_flags_filtered='`func_echo_all "$compiler_flags " | $SED -e "s%-brtl\\([[, ]]\\)%-berok\\1%g"`'
+ if test svr4 != "$with_aix_soname"; then
+ # This is similar to how AIX traditionally builds its shared
+ # libraries. Need -bnortl late, we may have -brtl in LDFLAGS.
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_aix' -o $output_objdir/$realname.d/$soname $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$realname.d/$soname'
+ fi
+ if test aix != "$with_aix_soname"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$CC '$shared_flag_svr4' -o $output_objdir/$realname.d/$shared_archive_member_spec.o $libobjs $deplibs $wl-bnoentry '$compiler_flags_filtered'$wl-bE:$export_symbols$allow_undefined_flag~$STRIP -e $output_objdir/$realname.d/$shared_archive_member_spec.o~( func_echo_all "#! $soname($shared_archive_member_spec.o)"; if test shr_64 = "$shared_archive_member_spec"; then func_echo_all "# 64"; else func_echo_all "# 32"; fi; cat $export_symbols ) > $output_objdir/$realname.d/$shared_archive_member_spec.imp~$AR $AR_FLAGS $output_objdir/$soname $output_objdir/$realname.d/$shared_archive_member_spec.o $output_objdir/$realname.d/$shared_archive_member_spec.imp'
+ else
+ # used by -dlpreopen to get the symbols
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$MV $output_objdir/$realname.d/$soname $output_objdir'
+ fi
+ _LT_TAGVAR(archive_expsym_cmds, $1)="$_LT_TAGVAR(archive_expsym_cmds, $1)"'~$RM -r $output_objdir/$realname.d'
fi
fi
;;
@@ -6099,7 +6614,7 @@
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
- _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -6127,57 +6642,58 @@
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
- shrext_cmds=".dll"
+ shrext_cmds=.dll
# FIXME: Setting linknames here is a bad hack.
- _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-dll~linknames='
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- $SED -n -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' -e '1\\\!p' < $export_symbols > $output_objdir/$soname.exp;
- else
- $SED -e 's/\\\\\\\(.*\\\\\\\)/-link\\\ -EXPORT:\\\\\\\1/' < $export_symbols > $output_objdir/$soname.exp;
- fi~
- $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
- linknames='
+ _LT_TAGVAR(archive_cmds, $1)='$CC -o $output_objdir/$soname $libobjs $compiler_flags $deplibs -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~linknames='
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp "$export_symbols" "$output_objdir/$soname.def";
+ echo "$tool_output_objdir$soname.def" > "$output_objdir/$soname.exp";
+ else
+ $SED -e '\''s/^/-link -EXPORT:/'\'' < $export_symbols > $output_objdir/$soname.exp;
+ fi~
+ $CC -o $tool_output_objdir$soname $libobjs $compiler_flags $deplibs "@$tool_output_objdir$soname.exp" -Wl,-DLL,-IMPLIB:"$tool_output_objdir$libname.dll.lib"~
+ linknames='
# The linker will not automatically build a static lib if we build a DLL.
# _LT_TAGVAR(old_archive_from_new_cmds, $1)='true'
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
# Don't use ranlib
_LT_TAGVAR(old_postinstall_cmds, $1)='chmod 644 $oldlib'
_LT_TAGVAR(postlink_cmds, $1)='lt_outputfile="@OUTPUT@"~
- lt_tool_outputfile="@TOOL_OUTPUT@"~
- case $lt_outputfile in
- *.exe|*.EXE) ;;
- *)
- lt_outputfile="$lt_outputfile.exe"
- lt_tool_outputfile="$lt_tool_outputfile.exe"
- ;;
- esac~
- func_to_tool_file "$lt_outputfile"~
- if test "$MANIFEST_TOOL" != ":" && test -f "$lt_outputfile.manifest"; then
- $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
- $RM "$lt_outputfile.manifest";
- fi'
+ lt_tool_outputfile="@TOOL_OUTPUT@"~
+ case $lt_outputfile in
+ *.exe|*.EXE) ;;
+ *)
+ lt_outputfile=$lt_outputfile.exe
+ lt_tool_outputfile=$lt_tool_outputfile.exe
+ ;;
+ esac~
+ func_to_tool_file "$lt_outputfile"~
+ if test : != "$MANIFEST_TOOL" && test -f "$lt_outputfile.manifest"; then
+ $MANIFEST_TOOL -manifest "$lt_tool_outputfile.manifest" -outputresource:"$lt_tool_outputfile" || exit 1;
+ $RM "$lt_outputfile.manifest";
+ fi'
;;
*)
# g++
# _LT_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless,
# as there is no search path for DLLs.
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-all-symbols'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-all-symbols'
_LT_TAGVAR(allow_undefined_flag, $1)=unsupported
_LT_TAGVAR(always_export_symbols, $1)=no
_LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
- # If the export-symbols file already is a .def file (1st line
- # is EXPORTS), use it as is; otherwise, prepend...
- _LT_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
- cp $export_symbols $output_objdir/$soname.def;
- else
- echo EXPORTS > $output_objdir/$soname.def;
- cat $export_symbols >> $output_objdir/$soname.def;
- fi~
- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
+ # If the export-symbols file already is a .def file, use it as
+ # is; otherwise, prepend EXPORTS...
+ _LT_TAGVAR(archive_expsym_cmds, $1)='if _LT_DLL_DEF_P([$export_symbols]); then
+ cp $export_symbols $output_objdir/$soname.def;
+ else
+ echo EXPORTS > $output_objdir/$soname.def;
+ cat $export_symbols >> $output_objdir/$soname.def;
+ fi~
+ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname $wl--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib'
else
_LT_TAGVAR(ld_shlibs, $1)=no
fi
@@ -6188,6 +6704,34 @@
_LT_DARWIN_LINKER_FEATURES($1)
;;
+ os2*)
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir'
+ _LT_TAGVAR(hardcode_minus_L, $1)=yes
+ _LT_TAGVAR(allow_undefined_flag, $1)=unsupported
+ shrext_cmds=.dll
+ _LT_TAGVAR(archive_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ emxexp $libobjs | $SED /"_DLL_InitTerm"/d >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$ECHO "LIBRARY ${soname%$shared_ext} INITINSTANCE TERMINSTANCE" > $output_objdir/$libname.def~
+ $ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~
+ $ECHO "DATA MULTIPLE NONSHARED" >> $output_objdir/$libname.def~
+ $ECHO EXPORTS >> $output_objdir/$libname.def~
+ prefix_cmds="$SED"~
+ if test EXPORTS = "`$SED 1q $export_symbols`"; then
+ prefix_cmds="$prefix_cmds -e 1d";
+ fi~
+ prefix_cmds="$prefix_cmds -e \"s/^\(.*\)$/_\1/g\""~
+ cat $export_symbols | $prefix_cmds >> $output_objdir/$libname.def~
+ $CC -Zdll -Zcrtdll -o $output_objdir/$soname $libobjs $deplibs $compiler_flags $output_objdir/$libname.def~
+ emximp -o $lib $output_objdir/$libname.def'
+ _LT_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/${libname}_dll.a $output_objdir/$libname.def'
+ _LT_TAGVAR(enable_shared_with_static_runtimes, $1)=yes
+ ;;
+
dgux*)
case $cc_basename in
ec++*)
@@ -6222,18 +6766,15 @@
_LT_TAGVAR(ld_shlibs, $1)=yes
;;
- gnu*)
- ;;
-
haiku*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
hpux9*)
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH,
# but as the default
@@ -6245,7 +6786,7 @@
_LT_TAGVAR(ld_shlibs, $1)=no
;;
aCC*)
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -b $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
@@ -6254,11 +6795,11 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $EGREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
- if test "$GXX" = yes; then
- _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
+ if test yes = "$GXX"; then
+ _LT_TAGVAR(archive_cmds, $1)='$RM $output_objdir/$soname~$CC -shared -nostdlib $pic_flag $wl+b $wl$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test "x$output_objdir/$soname" = "x$lib" || mv $output_objdir/$soname $lib'
else
# FIXME: insert proper C++ library support
_LT_TAGVAR(ld_shlibs, $1)=no
@@ -6268,15 +6809,15 @@
;;
hpux10*|hpux11*)
- if test $with_gnu_ld = no; then
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir'
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl+b $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
case $host_cpu in
hppa*64*|ia64*)
;;
*)
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
;;
esac
fi
@@ -6302,13 +6843,13 @@
aCC*)
case $host_cpu in
hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -b $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
esac
# Commands to make compiler produce verbose output that lists
@@ -6319,20 +6860,20 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | $GREP "\-L"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
- if test "$GXX" = yes; then
- if test $with_gnu_ld = no; then
+ if test yes = "$GXX"; then
+ if test no = "$with_gnu_ld"; then
case $host_cpu in
hppa*64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC $wl+h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
ia64*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $pic_flag $wl+h $wl$soname $wl+b $wl$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
;;
esac
fi
@@ -6347,22 +6888,22 @@
interix[[3-9]]*)
_LT_TAGVAR(hardcode_direct, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
# Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc.
# Instead, shared libraries are loaded at an image base (0x10000000 by
# default) and relocated if they conflict, which is a slow very memory
# consuming and fragmenting process. To avoid this, we pick a random,
# 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link
# time. Moving up from 0x10000000 also allows more sbrk(2) space.
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='sed "s|^|_|" $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags $wl-h,$soname $wl--retain-symbols-file,$output_objdir/$soname.expsym $wl--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
;;
irix5* | irix6*)
case $cc_basename in
CC*)
# SGI C++
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
# Archives containing C++ object files must be created using
# "CC -ar", where "CC" is the IRIX C++ compiler. This is
@@ -6371,22 +6912,22 @@
_LT_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs'
;;
*)
- if test "$GXX" = yes; then
- if test "$with_gnu_ld" = no; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ if test yes = "$GXX"; then
+ if test no = "$with_gnu_ld"; then
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
else
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` -o $lib'
fi
fi
_LT_TAGVAR(link_all_deplibs, $1)=yes
;;
esac
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
_LT_TAGVAR(inherit_rpath, $1)=yes
;;
- linux* | k*bsd*-gnu | kopensolaris*-gnu)
+ linux* | k*bsd*-gnu | kopensolaris*-gnu | gnu*)
case $cc_basename in
KCC*)
# Kuck and Associates, Inc. (KAI) C++ Compiler
@@ -6394,8 +6935,8 @@
# KCC will only create a shared library if the output file
# ends with ".so" (or ".sl" for HP-UX), so rename the library
# to its proper name (with version) after linking.
- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib $wl-retain-symbols-file,$export_symbols; mv \$templib $lib'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
@@ -6404,10 +6945,10 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | $GREP "ld"`; rm -f libconftest$shared_ext; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
# Archives containing C++ object files must be created using
# "CC -Bstatic", where "CC" is the KAI C++ compiler.
@@ -6421,59 +6962,59 @@
# earlier do not add the objects themselves.
case `$CC -V 2>&1` in
*"Version 7."*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
*) # Version 8.0 or newer
tmp_idyn=
case $host_cpu in
ia64*) tmp_idyn=' -i_dynamic';;
esac
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
esac
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive$convenience $wl--no-whole-archive'
;;
pgCC* | pgcpp*)
# Portland Group C++ compiler
case `$CC -V` in
*pgCC\ [[1-5]].* | *pgcpp\ [[1-5]].*)
_LT_TAGVAR(prelink_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
- compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $objs $libobjs $compile_deplibs~
+ compile_command="$compile_command `find $tpldir -name \*.o | sort | $NL2SP`"'
_LT_TAGVAR(old_archive_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
- $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
- $RANLIB $oldlib'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $oldobjs$old_deplibs~
+ $AR $AR_FLAGS $oldlib$oldobjs$old_deplibs `find $tpldir -name \*.o | sort | $NL2SP`~
+ $RANLIB $oldlib'
_LT_TAGVAR(archive_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='tpldir=Template.dir~
- rm -rf $tpldir~
- $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
- $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ rm -rf $tpldir~
+ $CC --prelink_objects --instantiation_dir $tpldir $predep_objects $libobjs $deplibs $convenience $postdep_objects~
+ $CC -shared $pic_flag $predep_objects $libobjs $deplibs `find $tpldir -name \*.o | sort | $NL2SP` $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
*) # Version 6 and above use weak symbols
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname $wl-retain-symbols-file $wl$export_symbols -o $lib'
;;
esac
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl--rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
;;
cxx*)
# Compaq C++
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname -o $lib $wl-retain-symbols-file $wl$export_symbols'
runpath_var=LD_RUN_PATH
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
@@ -6487,18 +7028,18 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "X$list" | $Xsed'
;;
xl* | mpixl* | bgxl*)
# IBM XL 8.0 on PPC, with GNU ld
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic'
- _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
- if test "x$supports_anon_versioning" = xyes; then
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl--export-dynamic'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname -o $lib'
+ if test yes = "$supports_anon_versioning"; then
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $output_objdir/$libname.ver~
- cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
- echo "local: *; };" >> $output_objdir/$libname.ver~
- $CC -qmkshrobj $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
+ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
+ echo "local: *; };" >> $output_objdir/$libname.ver~
+ $CC -qmkshrobj $libobjs $deplibs $compiler_flags $wl-soname $wl$soname $wl-version-script $wl$output_objdir/$libname.ver -o $lib'
fi
;;
*)
@@ -6506,10 +7047,10 @@
*Sun\ C*)
# Sun C++ 5.9
_LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file $wl$export_symbols'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` ${wl}--no-whole-archive'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; func_echo_all \"$new_convenience\"` $wl--no-whole-archive'
_LT_TAGVAR(compiler_needs_object, $1)=yes
# Not sure whether something based on
@@ -6567,22 +7108,17 @@
_LT_TAGVAR(ld_shlibs, $1)=yes
;;
- openbsd2*)
- # C++ shared libraries are fairly broken
- _LT_TAGVAR(ld_shlibs, $1)=no
- ;;
-
- openbsd*)
+ openbsd* | bitrig*)
if test -f /usr/libexec/ld.so; then
_LT_TAGVAR(hardcode_direct, $1)=yes
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
_LT_TAGVAR(hardcode_direct_absolute, $1)=yes
_LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib'
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E'
- _LT_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
+ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`"; then
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-retain-symbols-file,$export_symbols -o $lib'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-E'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)=$wlarc'--whole-archive$convenience '$wlarc'--no-whole-archive'
fi
output_verbose_link_cmd=func_echo_all
else
@@ -6598,9 +7134,9 @@
# KCC will only create a shared library if the output file
# ends with ".so" (or ".sl" for HP-UX), so rename the library
# to its proper name (with version) after linking.
- _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
+ _LT_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo "$lib" | $SED -e "s/\$tempext\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
# Archives containing C++ object files must be created using
@@ -6618,17 +7154,17 @@
cxx*)
case $host in
osf3*)
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && func_echo_all "${wl}-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $soname `test -n "$verstring" && func_echo_all "$wl-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
;;
*)
_LT_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*'
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && func_echo_all "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
- echo "-hidden">> $lib.exp~
- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname ${wl}-input ${wl}$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry ${output_objdir}/so_locations -o $lib~
- $RM $lib.exp'
+ echo "-hidden">> $lib.exp~
+ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname $wl-input $wl$lib.exp `test -n "$verstring" && $ECHO "-set_version $verstring"` -update_registry $output_objdir/so_locations -o $lib~
+ $RM $lib.exp'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir'
;;
esac
@@ -6643,21 +7179,21 @@
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
- output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
+ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP "ld" | $GREP -v "ld:"`; templist=`func_echo_all "$templist" | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list= ; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; func_echo_all "$list"'
;;
*)
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*'
+ if test yes,no = "$GXX,$with_gnu_ld"; then
+ _LT_TAGVAR(allow_undefined_flag, $1)=' $wl-expect_unresolved $wl\*'
case $host in
osf3*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && func_echo_all "${wl}-set_version ${wl}$verstring"` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-msym $wl-soname $wl$soname `test -n "$verstring" && func_echo_all "$wl-set_version $wl$verstring"` $wl-update_registry $wl$output_objdir/so_locations -o $lib'
;;
esac
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-rpath $wl$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=:
# Commands to make compiler produce verbose output that lists
@@ -6703,9 +7239,9 @@
# Sun C++ 4.2, 5.x and Centerline C++
_LT_TAGVAR(archive_cmds_need_lc,$1)=yes
_LT_TAGVAR(no_undefined_flag, $1)=' -zdefs'
- _LT_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G$allow_undefined_flag -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+ $CC -G$allow_undefined_flag $wl-M $wl$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
_LT_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
@@ -6713,7 +7249,7 @@
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
# The compiler driver will combine and reorder linker options,
- # but understands `-z linker_flag'.
+ # but understands '-z linker_flag'.
# Supported since Solaris 2.6 (maybe 2.5.1?)
_LT_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract'
;;
@@ -6730,30 +7266,30 @@
;;
gcx*)
# Green Hills C++ Compiler
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
# The C++ compiler must be used to create the archive.
_LT_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
;;
*)
# GNU C++ compiler with Solaris linker
- if test "$GXX" = yes && test "$with_gnu_ld" = no; then
- _LT_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs'
+ if test yes,no = "$GXX,$with_gnu_ld"; then
+ _LT_TAGVAR(no_undefined_flag, $1)=' $wl-z ${wl}defs'
if $CC --version | $GREP -v '^2\.7' > /dev/null; then
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -shared $pic_flag -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+ $CC -shared $pic_flag -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
else
- # g++ 2.7 appears to require `-G' NOT `-shared' on this
+ # g++ 2.7 appears to require '-G' NOT '-shared' on this
# platform.
- _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags $wl-h $wl$soname -o $lib'
_LT_TAGVAR(archive_expsym_cmds, $1)='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~
- $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
+ $CC -G -nostdlib $wl-M $wl$lib.exp $wl-h $wl$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$RM $lib.exp'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
@@ -6761,11 +7297,11 @@
output_verbose_link_cmd='$CC -G $CFLAGS -v conftest.$objext 2>&1 | $GREP -v "^Configured with:" | $GREP "\-L"'
fi
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R $wl$libdir'
case $host_os in
solaris2.[[0-5]] | solaris2.[[0-5]].*) ;;
*)
- _LT_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
+ _LT_TAGVAR(whole_archive_flag_spec, $1)='$wl-z ${wl}allextract$convenience $wl-z ${wl}defaultextract'
;;
esac
fi
@@ -6774,52 +7310,52 @@
;;
sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*)
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
runpath_var='LD_RUN_PATH'
case $cc_basename in
CC*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
;;
sysv5* | sco3.2v5* | sco5v6*)
- # Note: We can NOT use -z defs as we might desire, because we do not
+ # Note: We CANNOT use -z defs as we might desire, because we do not
# link with -lc, and that would cause any symbols used from libc to
# always be unresolved, which means just about no library would
# ever link correctly. If we're not using GNU ld we use -z text
# though, which does catch some bad symbols but isn't as heavy-handed
# as -z defs.
- _LT_TAGVAR(no_undefined_flag, $1)='${wl}-z,text'
- _LT_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs'
+ _LT_TAGVAR(no_undefined_flag, $1)='$wl-z,text'
+ _LT_TAGVAR(allow_undefined_flag, $1)='$wl-z,nodefs'
_LT_TAGVAR(archive_cmds_need_lc, $1)=no
_LT_TAGVAR(hardcode_shlibpath_var, $1)=no
- _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R,$libdir'
+ _LT_TAGVAR(hardcode_libdir_flag_spec, $1)='$wl-R,$libdir'
_LT_TAGVAR(hardcode_libdir_separator, $1)=':'
_LT_TAGVAR(link_all_deplibs, $1)=yes
- _LT_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport'
+ _LT_TAGVAR(export_dynamic_flag_spec, $1)='$wl-Bexport'
runpath_var='LD_RUN_PATH'
case $cc_basename in
CC*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -G $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -G $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
_LT_TAGVAR(old_archive_cmds, $1)='$CC -Tprelink_objects $oldobjs~
- '"$_LT_TAGVAR(old_archive_cmds, $1)"
+ '"$_LT_TAGVAR(old_archive_cmds, $1)"
_LT_TAGVAR(reload_cmds, $1)='$CC -Tprelink_objects $reload_objs~
- '"$_LT_TAGVAR(reload_cmds, $1)"
+ '"$_LT_TAGVAR(reload_cmds, $1)"
;;
*)
- _LT_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
- _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_cmds, $1)='$CC -shared $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
+ _LT_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $wl-Bexport:$export_symbols $wl-h,$soname -o $lib $libobjs $deplibs $compiler_flags'
;;
esac
;;
@@ -6850,10 +7386,10 @@
esac
AC_MSG_RESULT([$_LT_TAGVAR(ld_shlibs, $1)])
- test "$_LT_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no
+ test no = "$_LT_TAGVAR(ld_shlibs, $1)" && can_build_shared=no
- _LT_TAGVAR(GCC, $1)="$GXX"
- _LT_TAGVAR(LD, $1)="$LD"
+ _LT_TAGVAR(GCC, $1)=$GXX
+ _LT_TAGVAR(LD, $1)=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
@@ -6880,7 +7416,7 @@
lt_cv_path_LD=$lt_save_path_LD
lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
-fi # test "$_lt_caught_CXX_error" != yes
+fi # test yes != "$_lt_caught_CXX_error"
AC_LANG_POP
])# _LT_LANG_CXX_CONFIG
@@ -6902,13 +7438,14 @@
AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])
func_stripname_cnf ()
{
- case ${2} in
- .*) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%\\\\${2}\$%%"`;;
- *) func_stripname_result=`$ECHO "${3}" | $SED "s%^${1}%%; s%${2}\$%%"`;;
+ case @S|@2 in
+ .*) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%\\\\@S|@2\$%%"`;;
+ *) func_stripname_result=`$ECHO "@S|@3" | $SED "s%^@S|@1%%; s%@S|@2\$%%"`;;
esac
} # func_stripname_cnf
])# _LT_FUNC_STRIPNAME_CNF
+
# _LT_SYS_HIDDEN_LIBDEPS([TAGNAME])
# ---------------------------------
# Figure out "hidden" library dependencies from verbose
@@ -6992,13 +7529,13 @@
pre_test_object_deps_done=no
for p in `eval "$output_verbose_link_cmd"`; do
- case ${prev}${p} in
+ case $prev$p in
-L* | -R* | -l*)
# Some compilers place space between "-{L,R}" and the path.
# Remove the space.
- if test $p = "-L" ||
- test $p = "-R"; then
+ if test x-L = "$p" ||
+ test x-R = "$p"; then
prev=$p
continue
fi
@@ -7014,16 +7551,16 @@
case $p in
=*) func_stripname_cnf '=' '' "$p"; p=$lt_sysroot$func_stripname_result ;;
esac
- if test "$pre_test_object_deps_done" = no; then
- case ${prev} in
+ if test no = "$pre_test_object_deps_done"; then
+ case $prev in
-L | -R)
# Internal compiler library paths should come after those
# provided the user. The postdeps already come after the
# user supplied libs so there is no need to process them.
if test -z "$_LT_TAGVAR(compiler_lib_search_path, $1)"; then
- _LT_TAGVAR(compiler_lib_search_path, $1)="${prev}${p}"
+ _LT_TAGVAR(compiler_lib_search_path, $1)=$prev$p
else
- _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} ${prev}${p}"
+ _LT_TAGVAR(compiler_lib_search_path, $1)="${_LT_TAGVAR(compiler_lib_search_path, $1)} $prev$p"
fi
;;
# The "-l" case would never come before the object being
@@ -7031,9 +7568,9 @@
esac
else
if test -z "$_LT_TAGVAR(postdeps, $1)"; then
- _LT_TAGVAR(postdeps, $1)="${prev}${p}"
+ _LT_TAGVAR(postdeps, $1)=$prev$p
else
- _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} ${prev}${p}"
+ _LT_TAGVAR(postdeps, $1)="${_LT_TAGVAR(postdeps, $1)} $prev$p"
fi
fi
prev=
@@ -7048,15 +7585,15 @@
continue
fi
- if test "$pre_test_object_deps_done" = no; then
+ if test no = "$pre_test_object_deps_done"; then
if test -z "$_LT_TAGVAR(predep_objects, $1)"; then
- _LT_TAGVAR(predep_objects, $1)="$p"
+ _LT_TAGVAR(predep_objects, $1)=$p
else
_LT_TAGVAR(predep_objects, $1)="$_LT_TAGVAR(predep_objects, $1) $p"
fi
else
if test -z "$_LT_TAGVAR(postdep_objects, $1)"; then
- _LT_TAGVAR(postdep_objects, $1)="$p"
+ _LT_TAGVAR(postdep_objects, $1)=$p
else
_LT_TAGVAR(postdep_objects, $1)="$_LT_TAGVAR(postdep_objects, $1) $p"
fi
@@ -7087,51 +7624,6 @@
_LT_TAGVAR(postdep_objects,$1)=
_LT_TAGVAR(postdeps,$1)=
;;
-
-linux*)
- case `$CC -V 2>&1 | sed 5q` in
- *Sun\ C*)
- # Sun C++ 5.9
-
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
-
- if test "$solaris_use_stlport4" != yes; then
- _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
-
-solaris*)
- case $cc_basename in
- CC* | sunCC*)
- # The more standards-conforming stlport4 library is
- # incompatible with the Cstd library. Avoid specifying
- # it if it's in CXXFLAGS. Ignore libCrun as
- # -library=stlport4 depends on it.
- case " $CXX $CXXFLAGS " in
- *" -library=stlport4 "*)
- solaris_use_stlport4=yes
- ;;
- esac
-
- # Adding this requires a known-good setup of shared libraries for
- # Sun compiler versions before 5.6, else PIC objects from an old
- # archive will be linked into the output, leading to subtle bugs.
- if test "$solaris_use_stlport4" != yes; then
- _LT_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun'
- fi
- ;;
- esac
- ;;
esac
])
@@ -7140,7 +7632,7 @@
esac
_LT_TAGVAR(compiler_lib_search_dirs, $1)=
if test -n "${_LT_TAGVAR(compiler_lib_search_path, $1)}"; then
- _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | ${SED} -e 's! -L! !g' -e 's!^ !!'`
+ _LT_TAGVAR(compiler_lib_search_dirs, $1)=`echo " ${_LT_TAGVAR(compiler_lib_search_path, $1)}" | $SED -e 's! -L! !g' -e 's!^ !!'`
fi
_LT_TAGDECL([], [compiler_lib_search_dirs], [1],
[The directories searched by this compiler when creating a shared library])
@@ -7160,10 +7652,10 @@
# --------------------------
# Ensure that the configuration variables for a Fortran 77 compiler are
# suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_F77_CONFIG],
[AC_LANG_PUSH(Fortran 77)
-if test -z "$F77" || test "X$F77" = "Xno"; then
+if test -z "$F77" || test no = "$F77"; then
_lt_disable_F77=yes
fi
@@ -7200,7 +7692,7 @@
# the F77 compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_F77" != yes; then
+if test yes != "$_lt_disable_F77"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="\
subroutine t
@@ -7222,7 +7714,7 @@
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
- lt_save_CC="$CC"
+ lt_save_CC=$CC
lt_save_GCC=$GCC
lt_save_CFLAGS=$CFLAGS
CC=${F77-"f77"}
@@ -7236,21 +7728,25 @@
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
- test "$can_build_shared" = "no" && enable_shared=no
+ test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
- test "$enable_shared" = yes && enable_static=no
+ test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
fi
;;
aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
fi
;;
esac
@@ -7258,11 +7754,11 @@
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
+ test yes = "$enable_shared" || enable_static=yes
AC_MSG_RESULT([$enable_static])
- _LT_TAGVAR(GCC, $1)="$G77"
- _LT_TAGVAR(LD, $1)="$LD"
+ _LT_TAGVAR(GCC, $1)=$G77
+ _LT_TAGVAR(LD, $1)=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
@@ -7279,9 +7775,9 @@
fi # test -n "$compiler"
GCC=$lt_save_GCC
- CC="$lt_save_CC"
- CFLAGS="$lt_save_CFLAGS"
-fi # test "$_lt_disable_F77" != yes
+ CC=$lt_save_CC
+ CFLAGS=$lt_save_CFLAGS
+fi # test yes != "$_lt_disable_F77"
AC_LANG_POP
])# _LT_LANG_F77_CONFIG
@@ -7291,11 +7787,11 @@
# -------------------------
# Ensure that the configuration variables for a Fortran compiler are
# suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_FC_CONFIG],
[AC_LANG_PUSH(Fortran)
-if test -z "$FC" || test "X$FC" = "Xno"; then
+if test -z "$FC" || test no = "$FC"; then
_lt_disable_FC=yes
fi
@@ -7332,7 +7828,7 @@
# the FC compiler isn't working. Some variables (like enable_shared)
# are currently assumed to apply to all compilers on this platform,
# and will be corrupted by setting them based on a non-working compiler.
-if test "$_lt_disable_FC" != yes; then
+if test yes != "$_lt_disable_FC"; then
# Code to be used in simple compile tests
lt_simple_compile_test_code="\
subroutine t
@@ -7354,7 +7850,7 @@
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
- lt_save_CC="$CC"
+ lt_save_CC=$CC
lt_save_GCC=$GCC
lt_save_CFLAGS=$CFLAGS
CC=${FC-"f95"}
@@ -7370,21 +7866,25 @@
AC_MSG_RESULT([$can_build_shared])
AC_MSG_CHECKING([whether to build shared libraries])
- test "$can_build_shared" = "no" && enable_shared=no
+ test no = "$can_build_shared" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case $host_os in
aix3*)
- test "$enable_shared" = yes && enable_static=no
+ test yes = "$enable_shared" && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
fi
;;
aix[[4-9]]*)
- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
- test "$enable_shared" = yes && enable_static=no
+ if test ia64 != "$host_cpu"; then
+ case $enable_shared,$with_aix_soname,$aix_use_runtimelinking in
+ yes,aix,yes) ;; # shared object as lib.so file only
+ yes,svr4,*) ;; # shared object as lib.so archive member only
+ yes,*) enable_static=no ;; # shared object in lib.a archive as well
+ esac
fi
;;
esac
@@ -7392,11 +7892,11 @@
AC_MSG_CHECKING([whether to build static libraries])
# Make sure either enable_shared or enable_static is yes.
- test "$enable_shared" = yes || enable_static=yes
+ test yes = "$enable_shared" || enable_static=yes
AC_MSG_RESULT([$enable_static])
- _LT_TAGVAR(GCC, $1)="$ac_cv_fc_compiler_gnu"
- _LT_TAGVAR(LD, $1)="$LD"
+ _LT_TAGVAR(GCC, $1)=$ac_cv_fc_compiler_gnu
+ _LT_TAGVAR(LD, $1)=$LD
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
@@ -7416,7 +7916,7 @@
GCC=$lt_save_GCC
CC=$lt_save_CC
CFLAGS=$lt_save_CFLAGS
-fi # test "$_lt_disable_FC" != yes
+fi # test yes != "$_lt_disable_FC"
AC_LANG_POP
])# _LT_LANG_FC_CONFIG
@@ -7426,7 +7926,7 @@
# --------------------------
# Ensure that the configuration variables for the GNU Java Compiler compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_GCJ_CONFIG],
[AC_REQUIRE([LT_PROG_GCJ])dnl
AC_LANG_SAVE
@@ -7460,7 +7960,7 @@
CFLAGS=$GCJFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
-_LT_TAGVAR(LD, $1)="$LD"
+_LT_TAGVAR(LD, $1)=$LD
_LT_CC_BASENAME([$compiler])
# GCJ did not exist at the time GCC didn't implicitly link libc in.
@@ -7497,7 +7997,7 @@
# --------------------------
# Ensure that the configuration variables for the GNU Go compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_GO_CONFIG],
[AC_REQUIRE([LT_PROG_GO])dnl
AC_LANG_SAVE
@@ -7531,7 +8031,7 @@
CFLAGS=$GOFLAGS
compiler=$CC
_LT_TAGVAR(compiler, $1)=$CC
-_LT_TAGVAR(LD, $1)="$LD"
+_LT_TAGVAR(LD, $1)=$LD
_LT_CC_BASENAME([$compiler])
# Go did not exist at the time GCC didn't implicitly link libc in.
@@ -7568,7 +8068,7 @@
# -------------------------
# Ensure that the configuration variables for the Windows resource compiler
# are suitably defined. These variables are subsequently used by _LT_CONFIG
-# to write the compiler configuration to `libtool'.
+# to write the compiler configuration to 'libtool'.
m4_defun([_LT_LANG_RC_CONFIG],
[AC_REQUIRE([LT_PROG_RC])dnl
AC_LANG_SAVE
@@ -7584,7 +8084,7 @@
lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }'
# Code to be used in simple link tests
-lt_simple_link_test_code="$lt_simple_compile_test_code"
+lt_simple_link_test_code=$lt_simple_compile_test_code
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
_LT_TAG_COMPILER
@@ -7594,7 +8094,7 @@
_LT_LINKER_BOILERPLATE
# Allow CC to be a program name with arguments.
-lt_save_CC="$CC"
+lt_save_CC=$CC
lt_save_CFLAGS=$CFLAGS
lt_save_GCC=$GCC
GCC=
@@ -7623,7 +8123,7 @@
[m4_ifdef([AC_PROG_GCJ], [AC_PROG_GCJ],
[m4_ifdef([A][M_PROG_GCJ], [A][M_PROG_GCJ],
[AC_CHECK_TOOL(GCJ, gcj,)
- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
+ test set = "${GCJFLAGS+set}" || GCJFLAGS="-g -O2"
AC_SUBST(GCJFLAGS)])])[]dnl
])
@@ -7734,7 +8234,7 @@
# Add /usr/xpg4/bin/sed as it is typically found on Solaris
# along with /bin/sed that truncates output.
for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
- test ! -f $lt_ac_sed && continue
+ test ! -f "$lt_ac_sed" && continue
cat /dev/null > conftest.in
lt_ac_count=0
echo $ECHO_N "0123456789$ECHO_C" >conftest.in
@@ -7751,9 +8251,9 @@
$lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
cmp -s conftest.out conftest.nl || break
# 10000 chars as input seems more than enough
- test $lt_ac_count -gt 10 && break
+ test 10 -lt "$lt_ac_count" && break
lt_ac_count=`expr $lt_ac_count + 1`
- if test $lt_ac_count -gt $lt_ac_max; then
+ if test "$lt_ac_count" -gt "$lt_ac_max"; then
lt_ac_max=$lt_ac_count
lt_cv_path_SED=$lt_ac_sed
fi
@@ -7777,27 +8277,7 @@
# Find out whether the shell is Bourne or XSI compatible,
# or has some other useful features.
m4_defun([_LT_CHECK_SHELL_FEATURES],
-[AC_MSG_CHECKING([whether the shell understands some XSI constructs])
-# Try some XSI features
-xsi_shell=no
-( _lt_dummy="a/b/c"
- test "${_lt_dummy##*/},${_lt_dummy%/*},${_lt_dummy#??}"${_lt_dummy%"$_lt_dummy"}, \
- = c,a/b,b/c, \
- && eval 'test $(( 1 + 1 )) -eq 2 \
- && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \
- && xsi_shell=yes
-AC_MSG_RESULT([$xsi_shell])
-_LT_CONFIG_LIBTOOL_INIT([xsi_shell='$xsi_shell'])
-
-AC_MSG_CHECKING([whether the shell understands "+="])
-lt_shell_append=no
-( foo=bar; set foo baz; eval "$[1]+=\$[2]" && test "$foo" = barbaz ) \
- >/dev/null 2>&1 \
- && lt_shell_append=yes
-AC_MSG_RESULT([$lt_shell_append])
-_LT_CONFIG_LIBTOOL_INIT([lt_shell_append='$lt_shell_append'])
-
-if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
+[if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
lt_unset=unset
else
lt_unset=false
@@ -7821,102 +8301,9 @@
])# _LT_CHECK_SHELL_FEATURES
-# _LT_PROG_FUNCTION_REPLACE (FUNCNAME, REPLACEMENT-BODY)
-# ------------------------------------------------------
-# In `$cfgfile', look for function FUNCNAME delimited by `^FUNCNAME ()$' and
-# '^} FUNCNAME ', and replace its body with REPLACEMENT-BODY.
-m4_defun([_LT_PROG_FUNCTION_REPLACE],
-[dnl {
-sed -e '/^$1 ()$/,/^} # $1 /c\
-$1 ()\
-{\
-m4_bpatsubsts([$2], [$], [\\], [^\([ ]\)], [\\\1])
-} # Extended-shell $1 implementation' "$cfgfile" > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
-test 0 -eq $? || _lt_function_replace_fail=:
-])
-
-
-# _LT_PROG_REPLACE_SHELLFNS
-# -------------------------
-# Replace existing portable implementations of several shell functions with
-# equivalent extended shell implementations where those features are available..
-m4_defun([_LT_PROG_REPLACE_SHELLFNS],
-[if test x"$xsi_shell" = xyes; then
- _LT_PROG_FUNCTION_REPLACE([func_dirname], [dnl
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac])
-
- _LT_PROG_FUNCTION_REPLACE([func_basename], [dnl
- func_basename_result="${1##*/}"])
-
- _LT_PROG_FUNCTION_REPLACE([func_dirname_and_basename], [dnl
- case ${1} in
- */*) func_dirname_result="${1%/*}${2}" ;;
- * ) func_dirname_result="${3}" ;;
- esac
- func_basename_result="${1##*/}"])
-
- _LT_PROG_FUNCTION_REPLACE([func_stripname], [dnl
- # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are
- # positional parameters, so assign one to ordinary parameter first.
- func_stripname_result=${3}
- func_stripname_result=${func_stripname_result#"${1}"}
- func_stripname_result=${func_stripname_result%"${2}"}])
-
- _LT_PROG_FUNCTION_REPLACE([func_split_long_opt], [dnl
- func_split_long_opt_name=${1%%=*}
- func_split_long_opt_arg=${1#*=}])
-
- _LT_PROG_FUNCTION_REPLACE([func_split_short_opt], [dnl
- func_split_short_opt_arg=${1#??}
- func_split_short_opt_name=${1%"$func_split_short_opt_arg"}])
-
- _LT_PROG_FUNCTION_REPLACE([func_lo2o], [dnl
- case ${1} in
- *.lo) func_lo2o_result=${1%.lo}.${objext} ;;
- *) func_lo2o_result=${1} ;;
- esac])
-
- _LT_PROG_FUNCTION_REPLACE([func_xform], [ func_xform_result=${1%.*}.lo])
-
- _LT_PROG_FUNCTION_REPLACE([func_arith], [ func_arith_result=$(( $[*] ))])
-
- _LT_PROG_FUNCTION_REPLACE([func_len], [ func_len_result=${#1}])
-fi
-
-if test x"$lt_shell_append" = xyes; then
- _LT_PROG_FUNCTION_REPLACE([func_append], [ eval "${1}+=\\${2}"])
-
- _LT_PROG_FUNCTION_REPLACE([func_append_quoted], [dnl
- func_quote_for_eval "${2}"
-dnl m4 expansion turns \\\\ into \\, and then the shell eval turns that into \
- eval "${1}+=\\\\ \\$func_quote_for_eval_result"])
-
- # Save a `func_append' function call where possible by direct use of '+='
- sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1+="%g' $cfgfile > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
- test 0 -eq $? || _lt_function_replace_fail=:
-else
- # Save a `func_append' function call even when '+=' is not available
- sed -e 's%func_append \([[a-zA-Z_]]\{1,\}\) "%\1="$\1%g' $cfgfile > $cfgfile.tmp \
- && mv -f "$cfgfile.tmp" "$cfgfile" \
- || (rm -f "$cfgfile" && cp "$cfgfile.tmp" "$cfgfile" && rm -f "$cfgfile.tmp")
- test 0 -eq $? || _lt_function_replace_fail=:
-fi
-
-if test x"$_lt_function_replace_fail" = x":"; then
- AC_MSG_WARN([Unable to substitute extended shell functions in $ofile])
-fi
-])
-
# _LT_PATH_CONVERSION_FUNCTIONS
# -----------------------------
-# Determine which file name conversion functions should be used by
+# Determine what file name conversion functions should be used by
# func_to_host_file (and, implicitly, by func_to_host_path). These are needed
# for certain cross-compile configurations and native mingw.
m4_defun([_LT_PATH_CONVERSION_FUNCTIONS],
diff --git a/m4/ltoptions.m4 b/m4/ltoptions.m4
index 5d9acd8..94b0829 100644
--- a/m4/ltoptions.m4
+++ b/m4/ltoptions.m4
@@ -1,14 +1,14 @@
# Helper functions for option handling. -*- Autoconf -*-
#
-# Copyright (C) 2004, 2005, 2007, 2008, 2009 Free Software Foundation,
-# Inc.
+# Copyright (C) 2004-2005, 2007-2009, 2011-2015 Free Software
+# Foundation, Inc.
# Written by Gary V. Vaughan, 2004
#
# This file is free software; the Free Software Foundation gives
# unlimited permission to copy and/or distribute it, with or without
# modifications, as long as this notice is preserved.
-# serial 7 ltoptions.m4
+# serial 8 ltoptions.m4
# This is to help aclocal find these macros, as it can't see m4_define.
AC_DEFUN([LTOPTIONS_VERSION], [m4_if([1])])
@@ -29,7 +29,7 @@
[m4_define(_LT_MANGLE_OPTION([$1], [$2]))dnl
m4_ifdef(_LT_MANGLE_DEFUN([$1], [$2]),
_LT_MANGLE_DEFUN([$1], [$2]),
- [m4_warning([Unknown $1 option `$2'])])[]dnl
+ [m4_warning([Unknown $1 option '$2'])])[]dnl
])
@@ -75,13 +75,15 @@
dnl
dnl If no reference was made to various pairs of opposing options, then
dnl we run the default mode handler for the pair. For example, if neither
- dnl `shared' nor `disable-shared' was passed, we enable building of shared
+ dnl 'shared' nor 'disable-shared' was passed, we enable building of shared
dnl archives by default:
_LT_UNLESS_OPTIONS([LT_INIT], [shared disable-shared], [_LT_ENABLE_SHARED])
_LT_UNLESS_OPTIONS([LT_INIT], [static disable-static], [_LT_ENABLE_STATIC])
_LT_UNLESS_OPTIONS([LT_INIT], [pic-only no-pic], [_LT_WITH_PIC])
_LT_UNLESS_OPTIONS([LT_INIT], [fast-install disable-fast-install],
- [_LT_ENABLE_FAST_INSTALL])
+ [_LT_ENABLE_FAST_INSTALL])
+ _LT_UNLESS_OPTIONS([LT_INIT], [aix-soname=aix aix-soname=both aix-soname=svr4],
+ [_LT_WITH_AIX_SONAME([aix])])
])
])# _LT_SET_OPTIONS
@@ -112,7 +114,7 @@
[_LT_SET_OPTION([LT_INIT], [dlopen])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `dlopen' option into LT_INIT's first parameter.])
+put the 'dlopen' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
@@ -148,7 +150,7 @@
_LT_SET_OPTION([LT_INIT], [win32-dll])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `win32-dll' option into LT_INIT's first parameter.])
+put the 'win32-dll' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
@@ -157,9 +159,9 @@
# _LT_ENABLE_SHARED([DEFAULT])
# ----------------------------
-# implement the --enable-shared flag, and supports the `shared' and
-# `disable-shared' LT_INIT options.
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+# implement the --enable-shared flag, and supports the 'shared' and
+# 'disable-shared' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
m4_define([_LT_ENABLE_SHARED],
[m4_define([_LT_ENABLE_SHARED_DEFAULT], [m4_if($1, no, no, yes)])dnl
AC_ARG_ENABLE([shared],
@@ -172,14 +174,14 @@
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac],
[enable_shared=]_LT_ENABLE_SHARED_DEFAULT)
@@ -211,9 +213,9 @@
# _LT_ENABLE_STATIC([DEFAULT])
# ----------------------------
-# implement the --enable-static flag, and support the `static' and
-# `disable-static' LT_INIT options.
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+# implement the --enable-static flag, and support the 'static' and
+# 'disable-static' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
m4_define([_LT_ENABLE_STATIC],
[m4_define([_LT_ENABLE_STATIC_DEFAULT], [m4_if($1, no, no, yes)])dnl
AC_ARG_ENABLE([static],
@@ -226,14 +228,14 @@
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac],
[enable_static=]_LT_ENABLE_STATIC_DEFAULT)
@@ -265,9 +267,9 @@
# _LT_ENABLE_FAST_INSTALL([DEFAULT])
# ----------------------------------
-# implement the --enable-fast-install flag, and support the `fast-install'
-# and `disable-fast-install' LT_INIT options.
-# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'.
+# implement the --enable-fast-install flag, and support the 'fast-install'
+# and 'disable-fast-install' LT_INIT options.
+# DEFAULT is either 'yes' or 'no'. If omitted, it defaults to 'yes'.
m4_define([_LT_ENABLE_FAST_INSTALL],
[m4_define([_LT_ENABLE_FAST_INSTALL_DEFAULT], [m4_if($1, no, no, yes)])dnl
AC_ARG_ENABLE([fast-install],
@@ -280,14 +282,14 @@
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for pkg in $enableval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac],
[enable_fast_install=]_LT_ENABLE_FAST_INSTALL_DEFAULT)
@@ -304,14 +306,14 @@
[_LT_SET_OPTION([LT_INIT], m4_if([$1], [no], [disable-])[fast-install])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `fast-install' option into LT_INIT's first parameter.])
+the 'fast-install' option into LT_INIT's first parameter.])
])
AU_DEFUN([AC_DISABLE_FAST_INSTALL],
[_LT_SET_OPTION([LT_INIT], [disable-fast-install])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you put
-the `disable-fast-install' option into LT_INIT's first parameter.])
+the 'disable-fast-install' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
@@ -319,11 +321,64 @@
dnl AC_DEFUN([AM_DISABLE_FAST_INSTALL], [])
+# _LT_WITH_AIX_SONAME([DEFAULT])
+# ----------------------------------
+# implement the --with-aix-soname flag, and support the `aix-soname=aix'
+# and `aix-soname=both' and `aix-soname=svr4' LT_INIT options. DEFAULT
+# is either `aix', `both' or `svr4'. If omitted, it defaults to `aix'.
+m4_define([_LT_WITH_AIX_SONAME],
+[m4_define([_LT_WITH_AIX_SONAME_DEFAULT], [m4_if($1, svr4, svr4, m4_if($1, both, both, aix))])dnl
+shared_archive_member_spec=
+case $host,$enable_shared in
+power*-*-aix[[5-9]]*,yes)
+ AC_MSG_CHECKING([which variant of shared library versioning to provide])
+ AC_ARG_WITH([aix-soname],
+ [AS_HELP_STRING([--with-aix-soname=aix|svr4|both],
+ [shared library versioning (aka "SONAME") variant to provide on AIX, @<:@default=]_LT_WITH_AIX_SONAME_DEFAULT[@:>@.])],
+ [case $withval in
+ aix|svr4|both)
+ ;;
+ *)
+ AC_MSG_ERROR([Unknown argument to --with-aix-soname])
+ ;;
+ esac
+ lt_cv_with_aix_soname=$with_aix_soname],
+ [AC_CACHE_VAL([lt_cv_with_aix_soname],
+ [lt_cv_with_aix_soname=]_LT_WITH_AIX_SONAME_DEFAULT)
+ with_aix_soname=$lt_cv_with_aix_soname])
+ AC_MSG_RESULT([$with_aix_soname])
+ if test aix != "$with_aix_soname"; then
+ # For the AIX way of multilib, we name the shared archive member
+ # based on the bitwidth used, traditionally 'shr.o' or 'shr_64.o',
+ # and 'shr.imp' or 'shr_64.imp', respectively, for the Import File.
+ # Even when GNU compilers ignore OBJECT_MODE but need '-maix64' flag,
+ # the AIX toolchain works better with OBJECT_MODE set (default 32).
+ if test 64 = "${OBJECT_MODE-32}"; then
+ shared_archive_member_spec=shr_64
+ else
+ shared_archive_member_spec=shr
+ fi
+ fi
+ ;;
+*)
+ with_aix_soname=aix
+ ;;
+esac
+
+_LT_DECL([], [shared_archive_member_spec], [0],
+ [Shared archive member basename, for filename based shared library versioning on AIX])dnl
+])# _LT_WITH_AIX_SONAME
+
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=aix], [_LT_WITH_AIX_SONAME([aix])])
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=both], [_LT_WITH_AIX_SONAME([both])])
+LT_OPTION_DEFINE([LT_INIT], [aix-soname=svr4], [_LT_WITH_AIX_SONAME([svr4])])
+
+
# _LT_WITH_PIC([MODE])
# --------------------
-# implement the --with-pic flag, and support the `pic-only' and `no-pic'
+# implement the --with-pic flag, and support the 'pic-only' and 'no-pic'
# LT_INIT options.
-# MODE is either `yes' or `no'. If omitted, it defaults to `both'.
+# MODE is either 'yes' or 'no'. If omitted, it defaults to 'both'.
m4_define([_LT_WITH_PIC],
[AC_ARG_WITH([pic],
[AS_HELP_STRING([--with-pic@<:@=PKGS@:>@],
@@ -334,19 +389,17 @@
*)
pic_mode=default
# Look at the argument we got. We use all the common list separators.
- lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
+ lt_save_ifs=$IFS; IFS=$IFS$PATH_SEPARATOR,
for lt_pkg in $withval; do
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
if test "X$lt_pkg" = "X$lt_p"; then
pic_mode=yes
fi
done
- IFS="$lt_save_ifs"
+ IFS=$lt_save_ifs
;;
esac],
- [pic_mode=default])
-
-test -z "$pic_mode" && pic_mode=m4_default([$1], [default])
+ [pic_mode=m4_default([$1], [default])])
_LT_DECL([], [pic_mode], [0], [What type of objects to build])dnl
])# _LT_WITH_PIC
@@ -359,7 +412,7 @@
[_LT_SET_OPTION([LT_INIT], [pic-only])
AC_DIAGNOSE([obsolete],
[$0: Remove this warning and the call to _LT_SET_OPTION when you
-put the `pic-only' option into LT_INIT's first parameter.])
+put the 'pic-only' option into LT_INIT's first parameter.])
])
dnl aclocal-1.4 backwards compatibility:
diff --git a/m4/ltsugar.m4 b/m4/ltsugar.m4
index 9000a05..48bc934 100644
--- a/m4/ltsugar.m4
+++ b/m4/ltsugar.m4
@@ -1,6 +1,7 @@
# ltsugar.m4 -- libtool m4 base layer. -*-Autoconf-*-
#
-# Copyright (C) 2004, 2005, 2007, 2008 Free Software Foundation, Inc.
+# Copyright (C) 2004-2005, 2007-2008, 2011-2015 Free Software
+# Foundation, Inc.
# Written by Gary V. Vaughan, 2004
#
# This file is free software; the Free Software Foundation gives
@@ -33,7 +34,7 @@
# ------------
# Manipulate m4 lists.
# These macros are necessary as long as will still need to support
-# Autoconf-2.59 which quotes differently.
+# Autoconf-2.59, which quotes differently.
m4_define([lt_car], [[$1]])
m4_define([lt_cdr],
[m4_if([$#], 0, [m4_fatal([$0: cannot be called without arguments])],
@@ -44,7 +45,7 @@
# lt_append(MACRO-NAME, STRING, [SEPARATOR])
# ------------------------------------------
-# Redefine MACRO-NAME to hold its former content plus `SEPARATOR'`STRING'.
+# Redefine MACRO-NAME to hold its former content plus 'SEPARATOR''STRING'.
# Note that neither SEPARATOR nor STRING are expanded; they are appended
# to MACRO-NAME as is (leaving the expansion for when MACRO-NAME is invoked).
# No SEPARATOR is output if MACRO-NAME was previously undefined (different
diff --git a/m4/ltversion.m4 b/m4/ltversion.m4
index 07a8602..fa04b52 100644
--- a/m4/ltversion.m4
+++ b/m4/ltversion.m4
@@ -1,6 +1,6 @@
# ltversion.m4 -- version numbers -*- Autoconf -*-
#
-# Copyright (C) 2004 Free Software Foundation, Inc.
+# Copyright (C) 2004, 2011-2015 Free Software Foundation, Inc.
# Written by Scott James Remnant, 2004
#
# This file is free software; the Free Software Foundation gives
@@ -9,15 +9,15 @@
# @configure_input@
-# serial 3337 ltversion.m4
+# serial 4179 ltversion.m4
# This file is part of GNU Libtool
-m4_define([LT_PACKAGE_VERSION], [2.4.2])
-m4_define([LT_PACKAGE_REVISION], [1.3337])
+m4_define([LT_PACKAGE_VERSION], [2.4.6])
+m4_define([LT_PACKAGE_REVISION], [2.4.6])
AC_DEFUN([LTVERSION_VERSION],
-[macro_version='2.4.2'
-macro_revision='1.3337'
+[macro_version='2.4.6'
+macro_revision='2.4.6'
_LT_DECL(, macro_version, 0, [Which release of libtool.m4 was used?])
_LT_DECL(, macro_revision, 0)
])
diff --git a/m4/lt~obsolete.m4 b/m4/lt~obsolete.m4
index c573da9..c6b26f8 100644
--- a/m4/lt~obsolete.m4
+++ b/m4/lt~obsolete.m4
@@ -1,6 +1,7 @@
# lt~obsolete.m4 -- aclocal satisfying obsolete definitions. -*-Autoconf-*-
#
-# Copyright (C) 2004, 2005, 2007, 2009 Free Software Foundation, Inc.
+# Copyright (C) 2004-2005, 2007, 2009, 2011-2015 Free Software
+# Foundation, Inc.
# Written by Scott James Remnant, 2004.
#
# This file is free software; the Free Software Foundation gives
@@ -11,7 +12,7 @@
# These exist entirely to fool aclocal when bootstrapping libtool.
#
-# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN)
+# In the past libtool.m4 has provided macros via AC_DEFUN (or AU_DEFUN),
# which have later been changed to m4_define as they aren't part of the
# exported API, or moved to Autoconf or Automake where they belong.
#
@@ -25,7 +26,7 @@
# included after everything else. This provides aclocal with the
# AC_DEFUNs it wants, but when m4 processes it, it doesn't do anything
# because those macros already exist, or will be overwritten later.
-# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
+# We use AC_DEFUN over AU_DEFUN for compatibility with aclocal-1.6.
#
# Anytime we withdraw an AC_DEFUN or AU_DEFUN, remember to add it here.
# Yes, that means every name once taken will need to remain here until
diff --git a/missing b/missing
index cdea514..625aeb1 100755
--- a/missing
+++ b/missing
@@ -1,9 +1,9 @@
#! /bin/sh
# Common wrapper for a few potentially missing GNU programs.
-scriptversion=2012-06-26.16; # UTC
+scriptversion=2018-03-07.03; # UTC
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2018 Free Software Foundation, Inc.
# Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
@@ -17,7 +17,7 @@
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
+# along with this program. If not, see <https://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
@@ -101,9 +101,9 @@
exit $st
fi
-perl_URL=http://www.perl.org/
-flex_URL=http://flex.sourceforge.net/
-gnu_software_URL=http://www.gnu.org/software
+perl_URL=https://www.perl.org/
+flex_URL=https://github.com/westes/flex
+gnu_software_URL=https://www.gnu.org/software
program_details ()
{
@@ -160,7 +160,7 @@
;;
autom4te*)
echo "You might have modified some maintainer files that require"
- echo "the 'automa4te' program to be rebuilt."
+ echo "the 'autom4te' program to be rebuilt."
program_details 'autom4te'
;;
bison*|yacc*)
@@ -207,9 +207,9 @@
exit $st
# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
+# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
+# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
diff --git a/src/Makefile.am b/src/Makefile.am
index da68023..21fa0ff 100644
--- a/src/Makefile.am
+++ b/src/Makefile.am
@@ -1,8 +1,5 @@
-BUILT_SOURCES = vi.h emacs.h common.h fcns.h help.h fcns.c help.c
-if WIDECHAR
-BUILT_SOURCES += tokenizern.c historyn.c
-endif
+BUILT_SOURCES = vi.h emacs.h common.h fcns.h help.h func.h
AHDR= vi.h emacs.h common.h
ASRC= $(srcdir)/vi.c $(srcdir)/emacs.c $(srcdir)/common.c
@@ -22,28 +19,21 @@
help.h: Makefile $(ASRC)
AWK=$(AWK) sh $(srcdir)/makelist -bh $(ASRC) > $@
-fcns.c: Makefile $(AHDR)
+func.h: Makefile $(AHDR)
AWK=$(AWK) sh $(srcdir)/makelist -fc $(AHDR) > $@
-help.c: Makefile $(ASRC)
- AWK=$(AWK) sh $(srcdir)/makelist -bc $(ASRC) > $@
-
-tokenizern.c: Makefile $(srcdir)/tokenizer.c
- AWK=$(AWK) sh $(srcdir)/makelist -n $(srcdir)/tokenizer.c > $@
-
-historyn.c: Makefile $(srcdir)/history.c
- AWK=$(AWK) sh $(srcdir)/makelist -n $(srcdir)/history.c > $@
-
CLEANFILES = $(BUILT_SOURCES)
lib_LTLIBRARIES = libedit.la
-libedit_la_SOURCES = chared.c common.c el.c emacs.c hist.c keymacro.c map.c chartype.c parse.c \
+libedit_la_SOURCES = chared.c common.c el.c eln.c emacs.c hist.c keymacro.c map.c chartype.c parse.c \
prompt.c read.c refresh.c search.c sig.c terminal.c tty.c vi.c \
- fgetln.c wcsdup.c tokenizer.c \
- history.c filecomplete.c readline.c chared.h el.h hist.h \
+ wcsdup.c \
+ tokenizer.c tokenizern.c \
+ history.c historyn.c \
+ filecomplete.c readline.c chared.h literal.c el.h hist.h \
histedit.h keymacro.h map.h chartype.h parse.h prompt.h read.h refresh.h \
search.h sig.h sys.h terminal.h tty.h vis.h filecomplete.h \
- editline/readline.h
+ editline/readline.h literal.h
if !HAVE_STRLCPY
libedit_la_SOURCES += strlcpy.c
@@ -57,9 +47,6 @@
if !HAVE_UNVIS
libedit_la_SOURCES += unvis.c
endif
-if WIDECHAR
-libedit_la_SOURCES += eln.c
-endif
EXTRA_DIST = makelist shlib_version
nobase_include_HEADERS = histedit.h editline/readline.h
diff --git a/src/Makefile.in b/src/Makefile.in
index 474441c..7877ddf 100644
--- a/src/Makefile.in
+++ b/src/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.14 from Makefile.am.
+# Makefile.in generated by automake 1.16.1 from Makefile.am.
# @configure_input@
-# Copyright (C) 1994-2013 Free Software Foundation, Inc.
+# Copyright (C) 1994-2018 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
@@ -16,7 +16,17 @@
VPATH = @srcdir@
-am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
+am__is_gnu_make = { \
+ if test -z '$(MAKELEVEL)'; then \
+ false; \
+ elif test -n '$(MAKE_HOST)'; then \
+ true; \
+ elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+ true; \
+ else \
+ false; \
+ fi; \
+}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
@@ -79,15 +89,11 @@
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
-@WIDECHAR_TRUE@am__append_1 = tokenizern.c historyn.c
-@HAVE_STRLCPY_FALSE@am__append_2 = strlcpy.c
-@HAVE_STRLCAT_FALSE@am__append_3 = strlcat.c
-@HAVE_VIS_FALSE@am__append_4 = vis.c
-@HAVE_UNVIS_FALSE@am__append_5 = unvis.c
-@WIDECHAR_TRUE@am__append_6 = eln.c
+@HAVE_STRLCPY_FALSE@am__append_1 = strlcpy.c
+@HAVE_STRLCAT_FALSE@am__append_2 = strlcat.c
+@HAVE_VIS_FALSE@am__append_3 = vis.c
+@HAVE_UNVIS_FALSE@am__append_4 = unvis.c
subdir = src
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
- $(top_srcdir)/depcomp $(nobase_include_HEADERS)
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -95,6 +101,8 @@
$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(nobase_include_HEADERS) \
+ $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
@@ -129,28 +137,27 @@
am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(includedir)"
LTLIBRARIES = $(lib_LTLIBRARIES)
libedit_la_LIBADD =
-am__libedit_la_SOURCES_DIST = chared.c common.c el.c emacs.c hist.c \
- keymacro.c map.c chartype.c parse.c prompt.c read.c refresh.c \
- search.c sig.c terminal.c tty.c vi.c fgetln.c wcsdup.c \
- tokenizer.c history.c filecomplete.c readline.c chared.h el.h \
- hist.h histedit.h keymacro.h map.h chartype.h parse.h prompt.h \
- read.h refresh.h search.h sig.h sys.h terminal.h tty.h vis.h \
- filecomplete.h editline/readline.h strlcpy.c strlcat.c vis.c \
- unvis.c eln.c
+am__libedit_la_SOURCES_DIST = chared.c common.c el.c eln.c emacs.c \
+ hist.c keymacro.c map.c chartype.c parse.c prompt.c read.c \
+ refresh.c search.c sig.c terminal.c tty.c vi.c wcsdup.c \
+ tokenizer.c tokenizern.c history.c historyn.c filecomplete.c \
+ readline.c chared.h literal.c el.h hist.h histedit.h \
+ keymacro.h map.h chartype.h parse.h prompt.h read.h refresh.h \
+ search.h sig.h sys.h terminal.h tty.h vis.h filecomplete.h \
+ editline/readline.h literal.h strlcpy.c strlcat.c vis.c \
+ unvis.c
@HAVE_STRLCPY_FALSE@am__objects_1 = strlcpy.lo
@HAVE_STRLCAT_FALSE@am__objects_2 = strlcat.lo
@HAVE_VIS_FALSE@am__objects_3 = vis.lo
@HAVE_UNVIS_FALSE@am__objects_4 = unvis.lo
-@WIDECHAR_TRUE@am__objects_5 = eln.lo
-am_libedit_la_OBJECTS = chared.lo common.lo el.lo emacs.lo hist.lo \
- keymacro.lo map.lo chartype.lo parse.lo prompt.lo read.lo \
- refresh.lo search.lo sig.lo terminal.lo tty.lo vi.lo fgetln.lo \
- wcsdup.lo tokenizer.lo history.lo filecomplete.lo readline.lo \
- $(am__objects_1) $(am__objects_2) $(am__objects_3) \
- $(am__objects_4) $(am__objects_5)
-@WIDECHAR_TRUE@am__objects_6 = tokenizern.lo historyn.lo
-am__objects_7 = fcns.lo help.lo $(am__objects_6)
-nodist_libedit_la_OBJECTS = $(am__objects_7)
+am_libedit_la_OBJECTS = chared.lo common.lo el.lo eln.lo emacs.lo \
+ hist.lo keymacro.lo map.lo chartype.lo parse.lo prompt.lo \
+ read.lo refresh.lo search.lo sig.lo terminal.lo tty.lo vi.lo \
+ wcsdup.lo tokenizer.lo tokenizern.lo history.lo historyn.lo \
+ filecomplete.lo readline.lo literal.lo $(am__objects_1) \
+ $(am__objects_2) $(am__objects_3) $(am__objects_4)
+am__objects_5 =
+nodist_libedit_la_OBJECTS = $(am__objects_5)
libedit_la_OBJECTS = $(am_libedit_la_OBJECTS) \
$(nodist_libedit_la_OBJECTS)
AM_V_lt = $(am__v_lt_@AM_V@)
@@ -174,7 +181,21 @@
am__v_at_1 =
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
+am__maybe_remake_depfiles = depfiles
+am__depfiles_remade = ./$(DEPDIR)/chared.Plo ./$(DEPDIR)/chartype.Plo \
+ ./$(DEPDIR)/common.Plo ./$(DEPDIR)/el.Plo ./$(DEPDIR)/eln.Plo \
+ ./$(DEPDIR)/emacs.Plo ./$(DEPDIR)/filecomplete.Plo \
+ ./$(DEPDIR)/hist.Plo ./$(DEPDIR)/history.Plo \
+ ./$(DEPDIR)/historyn.Plo ./$(DEPDIR)/keymacro.Plo \
+ ./$(DEPDIR)/literal.Plo ./$(DEPDIR)/map.Plo \
+ ./$(DEPDIR)/parse.Plo ./$(DEPDIR)/prompt.Plo \
+ ./$(DEPDIR)/read.Plo ./$(DEPDIR)/readline.Plo \
+ ./$(DEPDIR)/refresh.Plo ./$(DEPDIR)/search.Plo \
+ ./$(DEPDIR)/sig.Plo ./$(DEPDIR)/strlcat.Plo \
+ ./$(DEPDIR)/strlcpy.Plo ./$(DEPDIR)/terminal.Plo \
+ ./$(DEPDIR)/tokenizer.Plo ./$(DEPDIR)/tokenizern.Plo \
+ ./$(DEPDIR)/tty.Plo ./$(DEPDIR)/unvis.Plo ./$(DEPDIR)/vi.Plo \
+ ./$(DEPDIR)/vis.Plo ./$(DEPDIR)/wcsdup.Plo
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
@@ -221,6 +242,7 @@
done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
+am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
@@ -261,6 +283,7 @@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
LT_VERSION = @LT_VERSION@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -339,21 +362,20 @@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
-BUILT_SOURCES = vi.h emacs.h common.h fcns.h help.h fcns.c help.c \
- $(am__append_1)
+BUILT_SOURCES = vi.h emacs.h common.h fcns.h help.h func.h
AHDR = vi.h emacs.h common.h
ASRC = $(srcdir)/vi.c $(srcdir)/emacs.c $(srcdir)/common.c
CLEANFILES = $(BUILT_SOURCES)
lib_LTLIBRARIES = libedit.la
-libedit_la_SOURCES = chared.c common.c el.c emacs.c hist.c keymacro.c \
- map.c chartype.c parse.c prompt.c read.c refresh.c search.c \
- sig.c terminal.c tty.c vi.c fgetln.c wcsdup.c tokenizer.c \
- history.c filecomplete.c readline.c chared.h el.h hist.h \
- histedit.h keymacro.h map.h chartype.h parse.h prompt.h read.h \
- refresh.h search.h sig.h sys.h terminal.h tty.h vis.h \
- filecomplete.h editline/readline.h $(am__append_2) \
- $(am__append_3) $(am__append_4) $(am__append_5) \
- $(am__append_6)
+libedit_la_SOURCES = chared.c common.c el.c eln.c emacs.c hist.c \
+ keymacro.c map.c chartype.c parse.c prompt.c read.c refresh.c \
+ search.c sig.c terminal.c tty.c vi.c wcsdup.c tokenizer.c \
+ tokenizern.c history.c historyn.c filecomplete.c readline.c \
+ chared.h literal.c el.h hist.h histedit.h keymacro.h map.h \
+ chartype.h parse.h prompt.h read.h refresh.h search.h sig.h \
+ sys.h terminal.h tty.h vis.h filecomplete.h \
+ editline/readline.h literal.h $(am__append_1) $(am__append_2) \
+ $(am__append_3) $(am__append_4)
EXTRA_DIST = makelist shlib_version
nobase_include_HEADERS = histedit.h editline/readline.h
nodist_libedit_la_SOURCES = $(BUILT_SOURCES)
@@ -372,17 +394,16 @@
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \
$(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign src/Makefile
-.PRECIOUS: Makefile
+ $(AUTOMAKE) --gnu src/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
@@ -438,38 +459,42 @@
distclean-compile:
-rm -f *.tab.c
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/chared.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/chartype.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/common.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/el.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eln.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/emacs.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fcns.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fgetln.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/filecomplete.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/help.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hist.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/history.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/historyn.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/keymacro.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/map.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parse.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/prompt.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/read.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/readline.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/refresh.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/search.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sig.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strlcat.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strlcpy.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/terminal.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tokenizer.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tokenizern.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tty.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/unvis.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vi.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vis.Plo@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wcsdup.Plo@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/chared.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/chartype.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/common.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/el.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eln.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/emacs.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/filecomplete.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hist.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/history.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/historyn.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/keymacro.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/literal.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/map.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/parse.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/prompt.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/read.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/readline.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/refresh.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/search.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sig.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strlcat.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/strlcpy.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/terminal.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tokenizer.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tokenizern.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tty.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/unvis.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vi.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vis.Plo@am__quote@ # am--include-marker
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/wcsdup.Plo@am__quote@ # am--include-marker
+
+$(am__depfiles_remade):
+ @$(MKDIR_P) $(@D)
+ @echo '# dummy' >$@-t && $(am__mv) $@-t $@
+
+am--depfiles: $(am__depfiles_remade)
.c.o:
@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@@ -574,7 +599,10 @@
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-distdir: $(DISTFILES)
+distdir: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
@@ -651,7 +679,36 @@
mostlyclean-am
distclean: distclean-am
- -rm -rf ./$(DEPDIR)
+ -rm -f ./$(DEPDIR)/chared.Plo
+ -rm -f ./$(DEPDIR)/chartype.Plo
+ -rm -f ./$(DEPDIR)/common.Plo
+ -rm -f ./$(DEPDIR)/el.Plo
+ -rm -f ./$(DEPDIR)/eln.Plo
+ -rm -f ./$(DEPDIR)/emacs.Plo
+ -rm -f ./$(DEPDIR)/filecomplete.Plo
+ -rm -f ./$(DEPDIR)/hist.Plo
+ -rm -f ./$(DEPDIR)/history.Plo
+ -rm -f ./$(DEPDIR)/historyn.Plo
+ -rm -f ./$(DEPDIR)/keymacro.Plo
+ -rm -f ./$(DEPDIR)/literal.Plo
+ -rm -f ./$(DEPDIR)/map.Plo
+ -rm -f ./$(DEPDIR)/parse.Plo
+ -rm -f ./$(DEPDIR)/prompt.Plo
+ -rm -f ./$(DEPDIR)/read.Plo
+ -rm -f ./$(DEPDIR)/readline.Plo
+ -rm -f ./$(DEPDIR)/refresh.Plo
+ -rm -f ./$(DEPDIR)/search.Plo
+ -rm -f ./$(DEPDIR)/sig.Plo
+ -rm -f ./$(DEPDIR)/strlcat.Plo
+ -rm -f ./$(DEPDIR)/strlcpy.Plo
+ -rm -f ./$(DEPDIR)/terminal.Plo
+ -rm -f ./$(DEPDIR)/tokenizer.Plo
+ -rm -f ./$(DEPDIR)/tokenizern.Plo
+ -rm -f ./$(DEPDIR)/tty.Plo
+ -rm -f ./$(DEPDIR)/unvis.Plo
+ -rm -f ./$(DEPDIR)/vi.Plo
+ -rm -f ./$(DEPDIR)/vis.Plo
+ -rm -f ./$(DEPDIR)/wcsdup.Plo
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-tags
@@ -697,7 +754,36 @@
installcheck-am:
maintainer-clean: maintainer-clean-am
- -rm -rf ./$(DEPDIR)
+ -rm -f ./$(DEPDIR)/chared.Plo
+ -rm -f ./$(DEPDIR)/chartype.Plo
+ -rm -f ./$(DEPDIR)/common.Plo
+ -rm -f ./$(DEPDIR)/el.Plo
+ -rm -f ./$(DEPDIR)/eln.Plo
+ -rm -f ./$(DEPDIR)/emacs.Plo
+ -rm -f ./$(DEPDIR)/filecomplete.Plo
+ -rm -f ./$(DEPDIR)/hist.Plo
+ -rm -f ./$(DEPDIR)/history.Plo
+ -rm -f ./$(DEPDIR)/historyn.Plo
+ -rm -f ./$(DEPDIR)/keymacro.Plo
+ -rm -f ./$(DEPDIR)/literal.Plo
+ -rm -f ./$(DEPDIR)/map.Plo
+ -rm -f ./$(DEPDIR)/parse.Plo
+ -rm -f ./$(DEPDIR)/prompt.Plo
+ -rm -f ./$(DEPDIR)/read.Plo
+ -rm -f ./$(DEPDIR)/readline.Plo
+ -rm -f ./$(DEPDIR)/refresh.Plo
+ -rm -f ./$(DEPDIR)/search.Plo
+ -rm -f ./$(DEPDIR)/sig.Plo
+ -rm -f ./$(DEPDIR)/strlcat.Plo
+ -rm -f ./$(DEPDIR)/strlcpy.Plo
+ -rm -f ./$(DEPDIR)/terminal.Plo
+ -rm -f ./$(DEPDIR)/tokenizer.Plo
+ -rm -f ./$(DEPDIR)/tokenizern.Plo
+ -rm -f ./$(DEPDIR)/tty.Plo
+ -rm -f ./$(DEPDIR)/unvis.Plo
+ -rm -f ./$(DEPDIR)/vi.Plo
+ -rm -f ./$(DEPDIR)/vis.Plo
+ -rm -f ./$(DEPDIR)/wcsdup.Plo
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
@@ -718,9 +804,9 @@
.MAKE: all check install install-am install-strip
-.PHONY: CTAGS GTAGS TAGS all all-am check check-am clean clean-generic \
- clean-libLTLIBRARIES clean-libtool cscopelist-am ctags \
- ctags-am distclean distclean-compile distclean-generic \
+.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \
+ clean-generic clean-libLTLIBRARIES clean-libtool cscopelist-am \
+ ctags ctags-am distclean distclean-compile distclean-generic \
distclean-libtool distclean-tags distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-dvi install-dvi-am install-exec \
@@ -734,6 +820,8 @@
tags tags-am uninstall uninstall-am uninstall-libLTLIBRARIES \
uninstall-nobase_includeHEADERS
+.PRECIOUS: Makefile
+
vi.h: Makefile $(srcdir)/vi.c
AWK=$(AWK) sh $(srcdir)/makelist -h $(srcdir)/vi.c > $@
@@ -750,18 +838,9 @@
help.h: Makefile $(ASRC)
AWK=$(AWK) sh $(srcdir)/makelist -bh $(ASRC) > $@
-fcns.c: Makefile $(AHDR)
+func.h: Makefile $(AHDR)
AWK=$(AWK) sh $(srcdir)/makelist -fc $(AHDR) > $@
-help.c: Makefile $(ASRC)
- AWK=$(AWK) sh $(srcdir)/makelist -bc $(ASRC) > $@
-
-tokenizern.c: Makefile $(srcdir)/tokenizer.c
- AWK=$(AWK) sh $(srcdir)/makelist -n $(srcdir)/tokenizer.c > $@
-
-historyn.c: Makefile $(srcdir)/history.c
- AWK=$(AWK) sh $(srcdir)/makelist -n $(srcdir)/history.c > $@
-
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
diff --git a/src/chared.c b/src/chared.c
index 3886f0b..0c527a6 100644
--- a/src/chared.c
+++ b/src/chared.c
@@ -1,4 +1,4 @@
-/* $NetBSD: chared.c,v 1.38 2013/07/12 17:48:29 christos Exp $ */
+/* $NetBSD: chared.c,v 1.57 2017/10/11 06:49:03 abhinav Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -37,17 +37,20 @@
#if 0
static char sccsid[] = "@(#)chared.c 8.1 (Berkeley) 6/4/93";
#else
-__RCSID("$NetBSD: chared.c,v 1.38 2013/07/12 17:48:29 christos Exp $");
+__RCSID("$NetBSD: chared.c,v 1.57 2017/10/11 06:49:03 abhinav Exp $");
#endif
#endif /* not lint && not SCCSID */
/*
* chared.c: Character editor utilities
*/
+#include <ctype.h>
#include <stdlib.h>
-#include "el.h"
+#include <string.h>
-private void ch__clearmacro (EditLine *);
+#include "el.h"
+#include "common.h"
+#include "fcns.h"
/* value to leave unused in line buffer */
#define EL_LEAVE 2
@@ -55,7 +58,7 @@
/* cv_undo():
* Handle state for the vi undo command
*/
-protected void
+libedit_private void
cv_undo(EditLine *el)
{
c_undo_t *vu = &el->el_chared.c_undo;
@@ -79,8 +82,8 @@
/* cv_yank():
* Save yank/delete data for paste
*/
-protected void
-cv_yank(EditLine *el, const Char *ptr, int size)
+libedit_private void
+cv_yank(EditLine *el, const wchar_t *ptr, int size)
{
c_kill_t *k = &el->el_chared.c_kill;
@@ -92,10 +95,10 @@
/* c_insert():
* Insert num characters
*/
-protected void
+libedit_private void
c_insert(EditLine *el, int num)
{
- Char *cp;
+ wchar_t *cp;
if (el->el_line.lastchar + num >= el->el_line.limit) {
if (!ch_enlargebufs(el, (size_t)num))
@@ -114,7 +117,7 @@
/* c_delafter():
* Delete num characters after the cursor
*/
-protected void
+libedit_private void
c_delafter(EditLine *el, int num)
{
@@ -127,7 +130,7 @@
}
if (num > 0) {
- Char *cp;
+ wchar_t *cp;
for (cp = el->el_line.cursor; cp <= el->el_line.lastchar; cp++)
*cp = cp[num];
@@ -140,10 +143,10 @@
/* c_delafter1():
* Delete the character after the cursor, do not yank
*/
-protected void
+libedit_private void
c_delafter1(EditLine *el)
{
- Char *cp;
+ wchar_t *cp;
for (cp = el->el_line.cursor; cp <= el->el_line.lastchar; cp++)
*cp = cp[1];
@@ -155,7 +158,7 @@
/* c_delbefore():
* Delete num characters before the cursor
*/
-protected void
+libedit_private void
c_delbefore(EditLine *el, int num)
{
@@ -168,7 +171,7 @@
}
if (num > 0) {
- Char *cp;
+ wchar_t *cp;
for (cp = el->el_line.cursor - num;
cp <= el->el_line.lastchar;
@@ -183,10 +186,10 @@
/* c_delbefore1():
* Delete the character before the cursor, do not yank
*/
-protected void
+libedit_private void
c_delbefore1(EditLine *el)
{
- Char *cp;
+ wchar_t *cp;
for (cp = el->el_line.cursor - 1; cp <= el->el_line.lastchar; cp++)
*cp = cp[1];
@@ -198,22 +201,22 @@
/* ce__isword():
* Return if p is part of a word according to emacs
*/
-protected int
-ce__isword(Int p)
+libedit_private int
+ce__isword(wint_t p)
{
- return Isalnum(p) || Strchr(STR("*?_-.[]~="), p) != NULL;
+ return iswalnum(p) || wcschr(L"*?_-.[]~=", p) != NULL;
}
/* cv__isword():
* Return if p is part of a word according to vi
*/
-protected int
-cv__isword(Int p)
+libedit_private int
+cv__isword(wint_t p)
{
- if (Isalnum(p) || p == '_')
+ if (iswalnum(p) || p == L'_')
return 1;
- if (Isgraph(p))
+ if (iswgraph(p))
return 2;
return 0;
}
@@ -222,18 +225,18 @@
/* cv__isWord():
* Return if p is part of a big word according to vi
*/
-protected int
-cv__isWord(Int p)
+libedit_private int
+cv__isWord(wint_t p)
{
- return !Isspace(p);
+ return !iswspace(p);
}
/* c__prev_word():
* Find the previous word
*/
-protected Char *
-c__prev_word(Char *p, Char *low, int n, int (*wtest)(Int))
+libedit_private wchar_t *
+c__prev_word(wchar_t *p, wchar_t *low, int n, int (*wtest)(wint_t))
{
p--;
@@ -256,8 +259,8 @@
/* c__next_word():
* Find the next word
*/
-protected Char *
-c__next_word(Char *p, Char *high, int n, int (*wtest)(Int))
+libedit_private wchar_t *
+c__next_word(wchar_t *p, wchar_t *high, int n, int (*wtest)(wint_t))
{
while (n--) {
while ((p < high) && !(*wtest)(*p))
@@ -274,8 +277,9 @@
/* cv_next_word():
* Find the next word vi style
*/
-protected Char *
-cv_next_word(EditLine *el, Char *p, Char *high, int n, int (*wtest)(Int))
+libedit_private wchar_t *
+cv_next_word(EditLine *el, wchar_t *p, wchar_t *high, int n,
+ int (*wtest)(wint_t))
{
int test;
@@ -288,7 +292,7 @@
* trailing whitespace! This is not what 'w' does..
*/
if (n || el->el_chared.c_vcmd.action != (DELETE|INSERT))
- while ((p < high) && Isspace(*p))
+ while ((p < high) && iswspace(*p))
p++;
}
@@ -303,14 +307,14 @@
/* cv_prev_word():
* Find the previous word vi style
*/
-protected Char *
-cv_prev_word(Char *p, Char *low, int n, int (*wtest)(Int))
+libedit_private wchar_t *
+cv_prev_word(wchar_t *p, wchar_t *low, int n, int (*wtest)(wint_t))
{
int test;
p--;
while (n--) {
- while ((p > low) && Isspace(*p))
+ while ((p > low) && iswspace(*p))
p--;
test = (*wtest)(*p);
while ((p >= low) && (*wtest)(*p) == test)
@@ -329,7 +333,7 @@
/* cv_delfini():
* Finish vi delete action
*/
-protected void
+libedit_private void
cv_delfini(EditLine *el)
{
int size;
@@ -367,15 +371,15 @@
/* cv__endword():
* Go to the end of this word according to vi
*/
-protected Char *
-cv__endword(Char *p, Char *high, int n, int (*wtest)(Int))
+libedit_private wchar_t *
+cv__endword(wchar_t *p, wchar_t *high, int n, int (*wtest)(wint_t))
{
int test;
p++;
while (n--) {
- while ((p < high) && Isspace(*p))
+ while ((p < high) && iswspace(*p))
p++;
test = (*wtest)(*p);
@@ -389,11 +393,9 @@
/* ch_init():
* Initialize the character editor
*/
-protected int
+libedit_private int
ch_init(EditLine *el)
{
- c_macro_t *ma = &el->el_chared.c_macro;
-
el->el_line.buffer = el_malloc(EL_BUFSIZ *
sizeof(*el->el_line.buffer));
if (el->el_line.buffer == NULL)
@@ -434,6 +436,8 @@
el->el_chared.c_kill.last = el->el_chared.c_kill.buf;
el->el_chared.c_resizefun = NULL;
el->el_chared.c_resizearg = NULL;
+ el->el_chared.c_aliasfun = NULL;
+ el->el_chared.c_aliasarg = NULL;
el->el_map.current = el->el_map.key;
@@ -443,19 +447,14 @@
el->el_state.argument = 1;
el->el_state.lastcmd = ED_UNASSIGNED;
- ma->level = -1;
- ma->offset = 0;
- ma->macro = el_malloc(EL_MAXMACRO * sizeof(*ma->macro));
- if (ma->macro == NULL)
- return -1;
return 0;
}
/* ch_reset():
* Reset the character editor
*/
-protected void
-ch_reset(EditLine *el, int mclear)
+libedit_private void
+ch_reset(EditLine *el)
{
el->el_line.cursor = el->el_line.buffer;
el->el_line.lastchar = el->el_line.buffer;
@@ -477,28 +476,17 @@
el->el_state.lastcmd = ED_UNASSIGNED;
el->el_history.eventno = 0;
-
- if (mclear)
- ch__clearmacro(el);
-}
-
-private void
-ch__clearmacro(EditLine *el)
-{
- c_macro_t *ma = &el->el_chared.c_macro;
- while (ma->level >= 0)
- el_free(ma->macro[ma->level--]);
}
/* ch_enlargebufs():
* Enlarge line buffer to be able to hold twice as much characters.
* Returns 1 if successful, 0 if not.
*/
-protected int
+libedit_private int
ch_enlargebufs(EditLine *el, size_t addlen)
{
size_t sz, newsz;
- Char *newbuffer, *oldbuf, *oldkbuf;
+ wchar_t *newbuffer, *oldbuf, *oldkbuf;
sz = (size_t)(el->el_line.limit - el->el_line.buffer + EL_LEAVE);
newsz = sz * 2;
@@ -520,7 +508,7 @@
/* zero the newly added memory, leave old data in */
(void) memset(&newbuffer[sz], 0, (newsz - sz) * sizeof(*newbuffer));
-
+
oldbuf = el->el_line.buffer;
el->el_line.buffer = newbuffer;
@@ -569,7 +557,7 @@
el->el_chared.c_redo.lim = newbuffer +
(el->el_chared.c_redo.lim - el->el_chared.c_redo.buf);
el->el_chared.c_redo.buf = newbuffer;
-
+
if (!hist_enlargebuf(el, sz, newsz))
return 0;
@@ -583,7 +571,7 @@
/* ch_end():
* Free the data structures used by the editor
*/
-protected void
+libedit_private void
ch_end(EditLine *el)
{
el_free(el->el_line.buffer);
@@ -598,21 +586,19 @@
el->el_chared.c_redo.cmd = ED_UNASSIGNED;
el_free(el->el_chared.c_kill.buf);
el->el_chared.c_kill.buf = NULL;
- ch_reset(el, 1);
- el_free(el->el_chared.c_macro.macro);
- el->el_chared.c_macro.macro = NULL;
+ ch_reset(el);
}
/* el_insertstr():
- * Insert string at cursorI
+ * Insert string at cursor
*/
-public int
-FUN(el,insertstr)(EditLine *el, const Char *s)
+int
+el_winsertstr(EditLine *el, const wchar_t *s)
{
size_t len;
- if (s == NULL || (len = Strlen(s)) == 0)
+ if (s == NULL || (len = wcslen(s)) == 0)
return -1;
if (el->el_line.lastchar + len >= el->el_line.limit) {
if (!ch_enlargebufs(el, len))
@@ -629,7 +615,7 @@
/* el_deletestr():
* Delete num characters before the cursor
*/
-public void
+void
el_deletestr(EditLine *el, int n)
{
if (n <= 0)
@@ -647,7 +633,7 @@
/* el_cursor():
* Move the cursor to the left or the right of the current position
*/
-public int
+int
el_cursor(EditLine *el, int n)
{
if (n == 0)
@@ -660,21 +646,20 @@
if (el->el_line.cursor > el->el_line.lastchar)
el->el_line.cursor = el->el_line.lastchar;
out:
- return el->el_line.cursor - el->el_line.buffer;
+ return (int)(el->el_line.cursor - el->el_line.buffer);
}
/* c_gets():
* Get a string
*/
-protected int
-c_gets(EditLine *el, Char *buf, const Char *prompt)
+libedit_private int
+c_gets(EditLine *el, wchar_t *buf, const wchar_t *prompt)
{
- Char ch;
ssize_t len;
- Char *cp = el->el_line.buffer;
+ wchar_t *cp = el->el_line.buffer, ch;
if (prompt) {
- len = (ssize_t)Strlen(prompt);
+ len = (ssize_t)wcslen(prompt);
(void)memcpy(cp, prompt, (size_t)len * sizeof(*cp));
cp += len;
}
@@ -686,7 +671,7 @@
el->el_line.lastchar = cp + 1;
re_refresh(el);
- if (FUN(el,getc)(el, &ch) != 1) {
+ if (el_wgetc(el, &ch) != 1) {
ed_end_of_file(el, 0);
len = -1;
break;
@@ -694,18 +679,19 @@
switch (ch) {
- case 0010: /* Delete and backspace */
+ case L'\b': /* Delete and backspace */
case 0177:
if (len == 0) {
len = -1;
break;
}
+ len--;
cp--;
continue;
case 0033: /* ESC */
- case '\r': /* Newline */
- case '\n':
+ case L'\r': /* Newline */
+ case L'\n':
buf[len] = ch;
break;
@@ -731,10 +717,10 @@
/* c_hpos():
* Return the current horizontal position of the cursor
*/
-protected int
+libedit_private int
c_hpos(EditLine *el)
{
- Char *ptr;
+ wchar_t *ptr;
/*
* Find how many characters till the beginning of this line.
@@ -750,10 +736,18 @@
}
}
-protected int
+libedit_private int
ch_resizefun(EditLine *el, el_zfunc_t f, void *a)
{
el->el_chared.c_resizefun = f;
el->el_chared.c_resizearg = a;
return 0;
}
+
+libedit_private int
+ch_aliasfun(EditLine *el, el_afunc_t f, void *a)
+{
+ el->el_chared.c_aliasfun = f;
+ el->el_chared.c_aliasarg = a;
+ return 0;
+}
diff --git a/src/chared.h b/src/chared.h
index 176475a..39f7d51 100644
--- a/src/chared.h
+++ b/src/chared.h
@@ -1,4 +1,4 @@
-/* $NetBSD: chared.h,v 1.21 2010/08/28 15:44:59 christos Exp $ */
+/* $NetBSD: chared.h,v 1.30 2016/05/22 19:44:26 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -40,13 +40,6 @@
#ifndef _h_el_chared
#define _h_el_chared
-#include <ctype.h>
-#include <string.h>
-
-#include "histedit.h"
-
-#define EL_MAXMACRO 10
-
/*
* This is an issue of basic "vi" look-and-feel. Defining VI_MOVE works
* like real vi: i.e. the transition from command<->insert modes moves
@@ -59,29 +52,22 @@
*/
#define VI_MOVE
-
-typedef struct c_macro_t {
- int level;
- int offset;
- Char **macro;
-} c_macro_t;
-
/*
* Undo information for vi - no undo in emacs (yet)
*/
typedef struct c_undo_t {
ssize_t len; /* length of saved line */
int cursor; /* position of saved cursor */
- Char *buf; /* full saved text */
+ wchar_t *buf; /* full saved text */
} c_undo_t;
/* redo for vi */
typedef struct c_redo_t {
- Char *buf; /* redo insert key sequence */
- Char *pos;
- Char *lim;
+ wchar_t *buf; /* redo insert key sequence */
+ wchar_t *pos;
+ wchar_t *lim;
el_action_t cmd; /* command to redo */
- Char ch; /* char that invoked it */
+ wchar_t ch; /* char that invoked it */
int count;
int action; /* from cv_action() */
} c_redo_t;
@@ -91,19 +77,20 @@
*/
typedef struct c_vcmd_t {
int action;
- Char *pos;
+ wchar_t *pos;
} c_vcmd_t;
/*
* Kill buffer for emacs
*/
typedef struct c_kill_t {
- Char *buf;
- Char *last;
- Char *mark;
+ wchar_t *buf;
+ wchar_t *last;
+ wchar_t *mark;
} c_kill_t;
typedef void (*el_zfunc_t)(EditLine *, void *);
+typedef const char *(*el_afunc_t)(void *, const char *);
/*
* Note that we use both data structures because the user can bind
@@ -114,9 +101,10 @@
c_kill_t c_kill;
c_redo_t c_redo;
c_vcmd_t c_vcmd;
- c_macro_t c_macro;
el_zfunc_t c_resizefun;
+ el_afunc_t c_aliasfun;
void * c_resizearg;
+ void * c_aliasarg;
} el_chared_t;
@@ -136,36 +124,32 @@
#define MODE_REPLACE 1
#define MODE_REPLACE_1 2
-#include "common.h"
-#include "vi.h"
-#include "emacs.h"
-#include "search.h"
-#include "fcns.h"
+libedit_private int cv__isword(wint_t);
+libedit_private int cv__isWord(wint_t);
+libedit_private void cv_delfini(EditLine *);
+libedit_private wchar_t *cv__endword(wchar_t *, wchar_t *, int, int (*)(wint_t));
+libedit_private int ce__isword(wint_t);
+libedit_private void cv_undo(EditLine *);
+libedit_private void cv_yank(EditLine *, const wchar_t *, int);
+libedit_private wchar_t *cv_next_word(EditLine*, wchar_t *, wchar_t *, int,
+ int (*)(wint_t));
+libedit_private wchar_t *cv_prev_word(wchar_t *, wchar_t *, int, int (*)(wint_t));
+libedit_private wchar_t *c__next_word(wchar_t *, wchar_t *, int, int (*)(wint_t));
+libedit_private wchar_t *c__prev_word(wchar_t *, wchar_t *, int, int (*)(wint_t));
+libedit_private void c_insert(EditLine *, int);
+libedit_private void c_delbefore(EditLine *, int);
+libedit_private void c_delbefore1(EditLine *);
+libedit_private void c_delafter(EditLine *, int);
+libedit_private void c_delafter1(EditLine *);
+libedit_private int c_gets(EditLine *, wchar_t *, const wchar_t *);
+libedit_private int c_hpos(EditLine *);
-protected int cv__isword(Int);
-protected int cv__isWord(Int);
-protected void cv_delfini(EditLine *);
-protected Char *cv__endword(Char *, Char *, int, int (*)(Int));
-protected int ce__isword(Int);
-protected void cv_undo(EditLine *);
-protected void cv_yank(EditLine *, const Char *, int);
-protected Char *cv_next_word(EditLine*, Char *, Char *, int, int (*)(Int));
-protected Char *cv_prev_word(Char *, Char *, int, int (*)(Int));
-protected Char *c__next_word(Char *, Char *, int, int (*)(Int));
-protected Char *c__prev_word(Char *, Char *, int, int (*)(Int));
-protected void c_insert(EditLine *, int);
-protected void c_delbefore(EditLine *, int);
-protected void c_delbefore1(EditLine *);
-protected void c_delafter(EditLine *, int);
-protected void c_delafter1(EditLine *);
-protected int c_gets(EditLine *, Char *, const Char *);
-protected int c_hpos(EditLine *);
-
-protected int ch_init(EditLine *);
-protected void ch_reset(EditLine *, int);
-protected int ch_resizefun(EditLine *, el_zfunc_t, void *);
-protected int ch_enlargebufs(EditLine *, size_t);
-protected void ch_end(EditLine *);
+libedit_private int ch_init(EditLine *);
+libedit_private void ch_reset(EditLine *);
+libedit_private int ch_resizefun(EditLine *, el_zfunc_t, void *);
+libedit_private int ch_aliasfun(EditLine *, el_afunc_t, void *);
+libedit_private int ch_enlargebufs(EditLine *, size_t);
+libedit_private void ch_end(EditLine *);
#endif /* _h_el_chared */
diff --git a/src/chartype.c b/src/chartype.c
index 8766aac..79429d6 100644
--- a/src/chartype.c
+++ b/src/chartype.c
@@ -1,4 +1,4 @@
-/* $NetBSD: chartype.c,v 1.10 2011/08/16 16:25:15 christos Exp $ */
+/* $NetBSD: chartype.c,v 1.34 2018/11/25 16:20:28 christos Exp $ */
/*-
* Copyright (c) 2009 The NetBSD Foundation, Inc.
@@ -12,13 +12,6 @@
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- * must display the following acknowledgement:
- * This product includes software developed by the NetBSD
- * Foundation, Inc. and its contributors.
- * 4. Neither the name of The NetBSD Foundation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
@@ -38,66 +31,84 @@
*/
#include "config.h"
#if !defined(lint) && !defined(SCCSID)
-__RCSID("$NetBSD: chartype.c,v 1.10 2011/08/16 16:25:15 christos Exp $");
+__RCSID("$NetBSD: chartype.c,v 1.34 2018/11/25 16:20:28 christos Exp $");
#endif /* not lint && not SCCSID */
-#include "el.h"
+
+#include <ctype.h>
+#include <limits.h>
#include <stdlib.h>
+#include <string.h>
+
+#include "el.h"
#define CT_BUFSIZ ((size_t)1024)
-#ifdef WIDECHAR
-protected void
-ct_conv_buff_resize(ct_buffer_t *conv, size_t mincsize, size_t minwsize)
+static int ct_conv_cbuff_resize(ct_buffer_t *, size_t);
+static int ct_conv_wbuff_resize(ct_buffer_t *, size_t);
+
+static int
+ct_conv_cbuff_resize(ct_buffer_t *conv, size_t csize)
{
void *p;
- if (mincsize > conv->csize) {
- conv->csize = mincsize;
- p = el_realloc(conv->cbuff, conv->csize * sizeof(*conv->cbuff));
- if (p == NULL) {
- conv->csize = 0;
- el_free(conv->cbuff);
- conv->cbuff = NULL;
- } else
- conv->cbuff = p;
- }
- if (minwsize > conv->wsize) {
- conv->wsize = minwsize;
- p = el_realloc(conv->wbuff, conv->wsize * sizeof(*conv->wbuff));
- if (p == NULL) {
- conv->wsize = 0;
- el_free(conv->wbuff);
- conv->wbuff = NULL;
- } else
- conv->wbuff = p;
+ if (csize <= conv->csize)
+ return 0;
+
+ conv->csize = csize;
+
+ p = el_realloc(conv->cbuff, conv->csize * sizeof(*conv->cbuff));
+ if (p == NULL) {
+ conv->csize = 0;
+ el_free(conv->cbuff);
+ conv->cbuff = NULL;
+ return -1;
}
+ conv->cbuff = p;
+ return 0;
+}
+
+static int
+ct_conv_wbuff_resize(ct_buffer_t *conv, size_t wsize)
+{
+ void *p;
+
+ if (wsize <= conv->wsize)
+ return 0;
+
+ conv->wsize = wsize;
+
+ p = el_realloc(conv->wbuff, conv->wsize * sizeof(*conv->wbuff));
+ if (p == NULL) {
+ conv->wsize = 0;
+ el_free(conv->wbuff);
+ conv->wbuff = NULL;
+ return -1;
+ }
+ conv->wbuff = p;
+ return 0;
}
-public char *
-ct_encode_string(const Char *s, ct_buffer_t *conv)
+char *
+ct_encode_string(const wchar_t *s, ct_buffer_t *conv)
{
char *dst;
- ssize_t used = 0;
+ ssize_t used;
if (!s)
return NULL;
- if (!conv->cbuff)
- ct_conv_buff_resize(conv, CT_BUFSIZ, (size_t)0);
- if (!conv->cbuff)
- return NULL;
dst = conv->cbuff;
- while (*s) {
- used = (ssize_t)(conv->csize - (size_t)(dst - conv->cbuff));
- if (used < 5) {
- used = dst - conv->cbuff;
- ct_conv_buff_resize(conv, conv->csize + CT_BUFSIZ,
- (size_t)0);
- if (!conv->cbuff)
+ for (;;) {
+ used = (ssize_t)(dst - conv->cbuff);
+ if ((conv->csize - (size_t)used) < 5) {
+ if (ct_conv_cbuff_resize(conv,
+ conv->csize + CT_BUFSIZ) == -1)
return NULL;
dst = conv->cbuff + used;
}
+ if (!*s)
+ break;
used = ct_encode_char(dst, (size_t)5, *s);
if (used == -1) /* failed to encode, need more buffer space */
abort();
@@ -108,48 +119,45 @@
return conv->cbuff;
}
-public Char *
+wchar_t *
ct_decode_string(const char *s, ct_buffer_t *conv)
{
- size_t len = 0;
+ size_t len;
if (!s)
return NULL;
- if (!conv->wbuff)
- ct_conv_buff_resize(conv, (size_t)0, CT_BUFSIZ);
- if (!conv->wbuff)
- return NULL;
- len = ct_mbstowcs(NULL, s, (size_t)0);
+ len = mbstowcs(NULL, s, (size_t)0);
if (len == (size_t)-1)
return NULL;
- if (len > conv->wsize)
- ct_conv_buff_resize(conv, (size_t)0, len + 1);
- if (!conv->wbuff)
- return NULL;
- ct_mbstowcs(conv->wbuff, s, conv->wsize);
+
+ if (conv->wsize < ++len)
+ if (ct_conv_wbuff_resize(conv, len + CT_BUFSIZ) == -1)
+ return NULL;
+
+ mbstowcs(conv->wbuff, s, conv->wsize);
return conv->wbuff;
}
-protected Char **
+libedit_private wchar_t **
ct_decode_argv(int argc, const char *argv[], ct_buffer_t *conv)
{
size_t bufspace;
int i;
- Char *p;
- Char **wargv;
+ wchar_t *p;
+ wchar_t **wargv;
ssize_t bytes;
/* Make sure we have enough space in the conversion buffer to store all
* the argv strings. */
for (i = 0, bufspace = 0; i < argc; ++i)
bufspace += argv[i] ? strlen(argv[i]) + 1 : 0;
- ct_conv_buff_resize(conv, (size_t)0, bufspace);
- if (!conv->wsize)
- return NULL;
+ if (conv->wsize < ++bufspace)
+ if (ct_conv_wbuff_resize(conv, bufspace + CT_BUFSIZ) == -1)
+ return NULL;
- wargv = el_malloc((size_t)argc * sizeof(*wargv));
+ wargv = el_malloc((size_t)(argc + 1) * sizeof(*wargv));
for (i = 0, p = conv->wbuff; i < argc; ++i) {
if (!argv[i]) { /* don't pass null pointers to mbstowcs */
@@ -167,95 +175,85 @@
bufspace -= (size_t)bytes;
p += bytes;
}
+ wargv[i] = NULL;
return wargv;
}
-protected size_t
-ct_enc_width(Char c)
+libedit_private size_t
+ct_enc_width(wchar_t c)
{
- /* UTF-8 encoding specific values */
- if (c < 0x80)
- return 1;
- else if (c < 0x0800)
- return 2;
- else if (c < 0x10000)
- return 3;
- else if (c < 0x110000)
- return 4;
- else
- return 0; /* not a valid codepoint */
+ mbstate_t mbs;
+ char buf[MB_LEN_MAX];
+ size_t size;
+ memset(&mbs, 0, sizeof(mbs));
+
+ if ((size = wcrtomb(buf, c, &mbs)) == (size_t)-1)
+ return 0;
+ return size;
}
-protected ssize_t
-ct_encode_char(char *dst, size_t len, Char c)
+libedit_private ssize_t
+ct_encode_char(char *dst, size_t len, wchar_t c)
{
ssize_t l = 0;
if (len < ct_enc_width(c))
return -1;
- l = ct_wctomb(dst, c);
+ l = wctomb(dst, c);
if (l < 0) {
- ct_wctomb_reset;
+ wctomb(NULL, L'\0');
l = 0;
}
return l;
}
-#endif
-protected const Char *
-ct_visual_string(const Char *s)
+libedit_private const wchar_t *
+ct_visual_string(const wchar_t *s, ct_buffer_t *conv)
{
- static Char *buff = NULL;
- static size_t buffsize = 0;
- void *p;
- Char *dst;
- ssize_t used = 0;
+ wchar_t *dst;
+ ssize_t used;
if (!s)
return NULL;
- if (!buff) {
- buffsize = CT_BUFSIZ;
- buff = el_malloc(buffsize * sizeof(*buff));
- }
- dst = buff;
+
+ if (ct_conv_wbuff_resize(conv, CT_BUFSIZ) == -1)
+ return NULL;
+
+ used = 0;
+ dst = conv->wbuff;
while (*s) {
- used = ct_visual_char(dst, buffsize - (size_t)(dst - buff), *s);
- if (used == -1) { /* failed to encode, need more buffer space */
- used = dst - buff;
- buffsize += CT_BUFSIZ;
- p = el_realloc(buff, buffsize * sizeof(*buff));
- if (p == NULL)
- goto out;
- buff = p;
- dst = buff + used;
- /* don't increment s here - we want to retry it! */
+ used = ct_visual_char(dst,
+ conv->wsize - (size_t)(dst - conv->wbuff), *s);
+ if (used != -1) {
+ ++s;
+ dst += used;
+ continue;
}
- else
- ++s;
- dst += used;
+
+ /* failed to encode, need more buffer space */
+ used = dst - conv->wbuff;
+ if (ct_conv_wbuff_resize(conv, conv->wsize + CT_BUFSIZ) == -1)
+ return NULL;
+ dst = conv->wbuff + used;
}
- if (dst >= (buff + buffsize)) { /* sigh */
- buffsize += 1;
- p = el_realloc(buff, buffsize * sizeof(*buff));
- if (p == NULL)
- goto out;
- buff = p;
- dst = buff + buffsize - 1;
+
+ if (dst >= (conv->wbuff + conv->wsize)) { /* sigh */
+ used = dst - conv->wbuff;
+ if (ct_conv_wbuff_resize(conv, conv->wsize + CT_BUFSIZ) == -1)
+ return NULL;
+ dst = conv->wbuff + used;
}
- *dst = 0;
- return buff;
-out:
- el_free(buff);
- buffsize = 0;
- return NULL;
+
+ *dst = L'\0';
+ return conv->wbuff;
}
-protected int
-ct_visual_width(Char c)
+libedit_private int
+ct_visual_width(wchar_t c)
{
int t = ct_chr_class(c);
switch (t) {
@@ -265,7 +263,6 @@
return 1; /* Hmm, this really need to be handled outside! */
case CHTYPE_NL:
return 0; /* Should this be 1 instead? */
-#ifdef WIDECHAR
case CHTYPE_PRINT:
return wcwidth(c);
case CHTYPE_NONPRINT:
@@ -273,20 +270,14 @@
return 8; /* \U+12345 */
else
return 7; /* \U+1234 */
-#else
- case CHTYPE_PRINT:
- return 1;
- case CHTYPE_NONPRINT:
- return 4; /* \123 */
-#endif
default:
return 0; /* should not happen */
}
}
-protected ssize_t
-ct_visual_char(Char *dst, size_t len, Char c)
+libedit_private ssize_t
+ct_visual_char(wchar_t *dst, size_t len, wchar_t c)
{
int t = ct_chr_class(c);
switch (t) {
@@ -311,7 +302,6 @@
* so this is right */
if ((ssize_t)len < ct_visual_width(c))
return -1; /* insufficient space */
-#ifdef WIDECHAR
*dst++ = '\\';
*dst++ = 'U';
*dst++ = '+';
@@ -323,13 +313,6 @@
*dst++ = tohexdigit(((unsigned int) c >> 4) & 0xf);
*dst = tohexdigit(((unsigned int) c ) & 0xf);
return c > 0xffff ? 8 : 7;
-#else
- *dst++ = '\\';
-#define tooctaldigit(v) ((v) + '0')
- *dst++ = tooctaldigit(((unsigned int) c >> 6) & 0x7);
- *dst++ = tooctaldigit(((unsigned int) c >> 3) & 0x7);
- *dst++ = tooctaldigit(((unsigned int) c ) & 0x7);
-#endif
/*FALLTHROUGH*/
/* these two should be handled outside this function */
default: /* we should never hit the default */
@@ -340,16 +323,16 @@
-protected int
-ct_chr_class(Char c)
+libedit_private int
+ct_chr_class(wchar_t c)
{
if (c == '\t')
return CHTYPE_TAB;
else if (c == '\n')
return CHTYPE_NL;
- else if (IsASCII(c) && Iscntrl(c))
+ else if (c < 0x100 && iswcntrl(c))
return CHTYPE_ASCIICTL;
- else if (Isprint(c))
+ else if (iswprint(c))
return CHTYPE_PRINT;
else
return CHTYPE_NONPRINT;
diff --git a/src/chartype.h b/src/chartype.h
index 12fa9ac..4cdd981 100644
--- a/src/chartype.h
+++ b/src/chartype.h
@@ -1,4 +1,4 @@
-/* $NetBSD: chartype.h,v 1.10 2011/11/16 01:45:10 christos Exp $ */
+/* $NetBSD: chartype.h,v 1.35 2017/05/22 19:16:25 christos Exp $ */
/*-
* Copyright (c) 2009 The NetBSD Foundation, Inc.
@@ -12,13 +12,6 @@
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- * must display the following acknowledgement:
- * This product includes software developed by the NetBSD
- * Foundation, Inc. and its contributors.
- * 4. Neither the name of The NetBSD Foundation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
@@ -36,15 +29,16 @@
#ifndef _h_chartype_f
#define _h_chartype_f
-
-
-#ifdef WIDECHAR
-
/* Ideally we should also test the value of the define to see if it
* supports non-BMP code points without requiring UTF-16, but nothing
* seems to actually advertise this properly, despite Unicode 3.1 having
* been around since 2001... */
-#if !defined(__NetBSD__) && !defined(__sun) && !(defined(__APPLE__) && defined(__MACH__))
+#if !defined(__NetBSD__) && \
+ !defined(__sun) && \
+ !(defined(__APPLE__) && defined(__MACH__)) && \
+ !defined(__OpenBSD__) && \
+ !defined(__FreeBSD__) && \
+ !defined(__DragonFly__)
#ifndef __STDC_ISO_10646__
/* In many places it is assumed that the first 127 code points are ASCII
* compatible, so ensure wchar_t indeed does ISO 10646 and not some other
@@ -60,180 +54,53 @@
#warning Build environment does not support non-BMP characters
#endif
-#ifndef HAVE_WCSDUP
-wchar_t *wcsdup(const wchar_t *s);
-#endif
-
-#define ct_mbtowc mbtowc
-#define ct_mbtowc_reset mbtowc(0,0,(size_t)0)
-#define ct_wctomb wctomb
-#define ct_wctomb_reset wctomb(0,0)
-#define ct_wcstombs wcstombs
-#define ct_mbstowcs mbstowcs
-
-#define Char wchar_t
-#define Int wint_t
-#define FUN(prefix,rest) prefix ## _w ## rest
-#define FUNW(type) type ## _w
-#define TYPE(type) type ## W
-#define FSTR "%ls"
-#define STR(x) L ## x
-#define UC(c) c
-#define Isalpha(x) iswalpha(x)
-#define Isalnum(x) iswalnum(x)
-#define Isgraph(x) iswgraph(x)
-#define Isspace(x) iswspace(x)
-#define Isdigit(x) iswdigit(x)
-#define Iscntrl(x) iswcntrl(x)
-#define Isprint(x) iswprint(x)
-
-#define Isupper(x) iswupper(x)
-#define Islower(x) iswlower(x)
-#define Toupper(x) towupper(x)
-#define Tolower(x) towlower(x)
-
-#define IsASCII(x) (x < 0x100)
-
-#define Strlen(x) wcslen(x)
-#define Strchr(s,c) wcschr(s,c)
-#define Strrchr(s,c) wcsrchr(s,c)
-#define Strstr(s,v) wcsstr(s,v)
-#define Strdup(x) wcsdup(x)
-#define Strcpy(d,s) wcscpy(d,s)
-#define Strncpy(d,s,n) wcsncpy(d,s,n)
-#define Strncat(d,s,n) wcsncat(d,s,n)
-
-#define Strcmp(s,v) wcscmp(s,v)
-#define Strncmp(s,v,n) wcsncmp(s,v,n)
-#define Strcspn(s,r) wcscspn(s,r)
-
-#define Strtol(p,e,b) wcstol(p,e,b)
-
-static inline int
-Width(wchar_t c)
-{
- int w = wcwidth(c);
- return w < 0 ? 0 : w;
-}
-
-#else /* NARROW */
-
-#define ct_mbtowc error
-#define ct_mbtowc_reset
-#define ct_wctomb error
-#define ct_wctomb_reset
-#define ct_wcstombs(a, b, c) (strncpy(a, b, c), strlen(a))
-#define ct_mbstowcs(a, b, c) (strncpy(a, b, c), strlen(a))
-
-#define Char char
-#define Int int
-#define FUN(prefix,rest) prefix ## _ ## rest
-#define FUNW(type) type
-#define TYPE(type) type
-#define FSTR "%s"
-#define STR(x) x
-#define UC(c) (unsigned char)(c)
-
-#define Isalpha(x) isalpha((unsigned char)x)
-#define Isalnum(x) isalnum((unsigned char)x)
-#define Isgraph(x) isgraph((unsigned char)x)
-#define Isspace(x) isspace((unsigned char)x)
-#define Isdigit(x) isdigit((unsigned char)x)
-#define Iscntrl(x) iscntrl((unsigned char)x)
-#define Isprint(x) isprint((unsigned char)x)
-
-#define Isupper(x) isupper((unsigned char)x)
-#define Islower(x) islower((unsigned char)x)
-#define Toupper(x) toupper((unsigned char)x)
-#define Tolower(x) tolower((unsigned char)x)
-
-#define IsASCII(x) isascii((unsigned char)x)
-
-#define Strlen(x) strlen(x)
-#define Strchr(s,c) strchr(s,c)
-#define Strrchr(s,c) strrchr(s,c)
-#define Strstr(s,v) strstr(s,v)
-#define Strdup(x) strdup(x)
-#define Strcpy(d,s) strcpy(d,s)
-#define Strncpy(d,s,n) strncpy(d,s,n)
-#define Strncat(d,s,n) strncat(d,s,n)
-
-#define Strcmp(s,v) strcmp(s,v)
-#define Strncmp(s,v,n) strncmp(s,v,n)
-#define Strcspn(s,r) strcspn(s,r)
-
-#define Strtol(p,e,b) strtol(p,e,b)
-
-#define Width(c) 1
-
-#endif
-
-
-#ifdef WIDECHAR
/*
* Conversion buffer
*/
typedef struct ct_buffer_t {
char *cbuff;
size_t csize;
- Char *wbuff;
+ wchar_t *wbuff;
size_t wsize;
} ct_buffer_t;
-#define ct_encode_string __ct_encode_string
/* Encode a wide-character string and return the UTF-8 encoded result. */
-public char *ct_encode_string(const Char *, ct_buffer_t *);
+char *ct_encode_string(const wchar_t *, ct_buffer_t *);
-#define ct_decode_string __ct_decode_string
/* Decode a (multi)?byte string and return the wide-character string result. */
-public Char *ct_decode_string(const char *, ct_buffer_t *);
+wchar_t *ct_decode_string(const char *, ct_buffer_t *);
/* Decode a (multi)?byte argv string array.
* The pointer returned must be free()d when done. */
-protected Char **ct_decode_argv(int, const char *[], ct_buffer_t *);
+libedit_private wchar_t **ct_decode_argv(int, const char *[], ct_buffer_t *);
-/* Resizes the conversion buffer(s) if needed. */
-protected void ct_conv_buff_resize(ct_buffer_t *, size_t, size_t);
-protected ssize_t ct_encode_char(char *, size_t, Char);
-protected size_t ct_enc_width(Char);
-
-#define ct_free_argv(s) el_free(s)
-
-#else
-#define ct_encode_string(s, b) (s)
-#define ct_decode_string(s, b) (s)
-#define ct_decode_argv(l, s, b) (s)
-#define ct_conv_buff_resize(b, os, ns)
-#define ct_encode_char(d, l, s) (*d = s, 1)
-#define ct_free_argv(s)
-#endif
-
-#ifndef NARROWCHAR
-/* Encode a characted into the destination buffer, provided there is sufficent
+/* Encode a character into the destination buffer, provided there is sufficient
* buffer space available. Returns the number of bytes used up (zero if the
* character cannot be encoded, -1 if there was not enough space available). */
+libedit_private ssize_t ct_encode_char(char *, size_t, wchar_t);
+libedit_private size_t ct_enc_width(wchar_t);
-/* The maximum buffer size to hold the most unwieldly visual representation,
+/* The maximum buffer size to hold the most unwieldy visual representation,
* in this case \U+nnnnn. */
#define VISUAL_WIDTH_MAX ((size_t)8)
/* The terminal is thought of in terms of X columns by Y lines. In the cases
- * where a wide character takes up more than one column, the adjacent
+ * where a wide character takes up more than one column, the adjacent
* occupied column entries will contain this faux character. */
-#define MB_FILL_CHAR ((Char)-1)
+#define MB_FILL_CHAR ((wchar_t)-1)
/* Visual width of character c, taking into account ^? , \0177 and \U+nnnnn
* style visual expansions. */
-protected int ct_visual_width(Char);
+libedit_private int ct_visual_width(wchar_t);
/* Turn the given character into the appropriate visual format, matching
* the width given by ct_visual_width(). Returns the number of characters used
- * up, or -1 if insufficient space. Buffer length is in count of Char's. */
-protected ssize_t ct_visual_char(Char *, size_t, Char);
+ * up, or -1 if insufficient space. Buffer length is in count of wchar_t's. */
+libedit_private ssize_t ct_visual_char(wchar_t *, size_t, wchar_t);
/* Convert the given string into visual format, using the ct_visual_char()
* function. Uses a static buffer, so not threadsafe. */
-protected const Char *ct_visual_string(const Char *);
+libedit_private const wchar_t *ct_visual_string(const wchar_t *, ct_buffer_t *);
/* printable character, use ct_visual_width() to find out display width */
@@ -247,8 +114,6 @@
/* non-printable character */
#define CHTYPE_NONPRINT (-4)
/* classification of character c, as one of the above defines */
-protected int ct_chr_class(Char c);
-#endif
-
+libedit_private int ct_chr_class(wchar_t c);
#endif /* _chartype_f */
diff --git a/src/common.c b/src/common.c
index 1726b0f..bc6c057 100644
--- a/src/common.c
+++ b/src/common.c
@@ -1,4 +1,4 @@
-/* $NetBSD: common.c,v 1.29 2012/03/24 20:08:43 christos Exp $ */
+/* $NetBSD: common.c,v 1.48 2018/02/26 17:36:14 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -37,22 +37,29 @@
#if 0
static char sccsid[] = "@(#)common.c 8.1 (Berkeley) 6/4/93";
#else
-__RCSID("$NetBSD: common.c,v 1.29 2012/03/24 20:08:43 christos Exp $");
+__RCSID("$NetBSD: common.c,v 1.48 2018/02/26 17:36:14 christos Exp $");
#endif
#endif /* not lint && not SCCSID */
/*
* common.c: Common Editor functions
*/
+#include <ctype.h>
+#include <string.h>
+
#include "el.h"
+#include "common.h"
+#include "fcns.h"
+#include "parse.h"
+#include "vi.h"
/* ed_end_of_file():
* Indicate end of file
* [^D]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-ed_end_of_file(EditLine *el, Int c __attribute__((__unused__)))
+ed_end_of_file(EditLine *el, wint_t c __attribute__((__unused__)))
{
re_goto_bottom(el);
@@ -65,8 +72,8 @@
* Add character to the line
* Insert a character [bound to all insert keys]
*/
-protected el_action_t
-ed_insert(EditLine *el, Int c)
+libedit_private el_action_t
+ed_insert(EditLine *el, wint_t c)
{
int count = el->el_state.argument;
@@ -107,11 +114,11 @@
* Delete from beginning of current word to cursor
* [M-^?] [^W]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-ed_delete_prev_word(EditLine *el, Int c __attribute__((__unused__)))
+ed_delete_prev_word(EditLine *el, wint_t c __attribute__((__unused__)))
{
- Char *cp, *p, *kp;
+ wchar_t *cp, *p, *kp;
if (el->el_line.cursor == el->el_line.buffer)
return CC_ERROR;
@@ -135,14 +142,14 @@
* Delete character under cursor
* [^D] [x]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-ed_delete_next_char(EditLine *el, Int c __attribute__((__unused__)))
+ed_delete_next_char(EditLine *el, wint_t c __attribute__((__unused__)))
{
#ifdef DEBUG_EDIT
#define EL el->el_line
- (void) fprintf(el->el_errlfile,
- "\nD(b: %x(%s) c: %x(%s) last: %x(%s) limit: %x(%s)\n",
+ (void) fprintf(el->el_errfile,
+ "\nD(b: %p(%ls) c: %p(%ls) last: %p(%ls) limit: %p(%ls)\n",
EL.buffer, EL.buffer, EL.cursor, EL.cursor, EL.lastchar,
EL.lastchar, EL.limit, EL.limit);
#endif
@@ -182,11 +189,11 @@
* Cut to the end of line
* [^K] [^K]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-ed_kill_line(EditLine *el, Int c __attribute__((__unused__)))
+ed_kill_line(EditLine *el, wint_t c __attribute__((__unused__)))
{
- Char *kp, *cp;
+ wchar_t *kp, *cp;
cp = el->el_line.cursor;
kp = el->el_chared.c_kill.buf;
@@ -203,9 +210,9 @@
* Move cursor to the end of line
* [^E] [^E]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-ed_move_to_end(EditLine *el, Int c __attribute__((__unused__)))
+ed_move_to_end(EditLine *el, wint_t c __attribute__((__unused__)))
{
el->el_line.cursor = el->el_line.lastchar;
@@ -226,16 +233,16 @@
* Move cursor to the beginning of line
* [^A] [^A]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-ed_move_to_beg(EditLine *el, Int c __attribute__((__unused__)))
+ed_move_to_beg(EditLine *el, wint_t c __attribute__((__unused__)))
{
el->el_line.cursor = el->el_line.buffer;
if (el->el_map.type == MAP_VI) {
/* We want FIRST non space character */
- while (Isspace(*el->el_line.cursor))
+ while (iswspace(*el->el_line.cursor))
el->el_line.cursor++;
if (el->el_chared.c_vcmd.action != NOP) {
cv_delfini(el);
@@ -250,8 +257,8 @@
* Exchange the character to the left of the cursor with the one under it
* [^T] [^T]
*/
-protected el_action_t
-ed_transpose_chars(EditLine *el, Int c)
+libedit_private el_action_t
+ed_transpose_chars(EditLine *el, wint_t c)
{
if (el->el_line.cursor < el->el_line.lastchar) {
@@ -275,11 +282,11 @@
* Move to the right one character
* [^F] [^F]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-ed_next_char(EditLine *el, Int c __attribute__((__unused__)))
+ed_next_char(EditLine *el, wint_t c __attribute__((__unused__)))
{
- Char *lim = el->el_line.lastchar;
+ wchar_t *lim = el->el_line.lastchar;
if (el->el_line.cursor >= lim ||
(el->el_line.cursor == lim - 1 &&
@@ -304,9 +311,9 @@
* Move to the beginning of the current word
* [M-b] [b]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-ed_prev_word(EditLine *el, Int c __attribute__((__unused__)))
+ed_prev_word(EditLine *el, wint_t c __attribute__((__unused__)))
{
if (el->el_line.cursor == el->el_line.buffer)
@@ -330,9 +337,9 @@
* Move to the left one character
* [^B] [^B]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-ed_prev_char(EditLine *el, Int c __attribute__((__unused__)))
+ed_prev_char(EditLine *el, wint_t c __attribute__((__unused__)))
{
if (el->el_line.cursor > el->el_line.buffer) {
@@ -355,18 +362,18 @@
* Add the next character typed verbatim
* [^V] [^V]
*/
-protected el_action_t
-ed_quoted_insert(EditLine *el, Int c)
+libedit_private el_action_t
+/*ARGSUSED*/
+ed_quoted_insert(EditLine *el, wint_t c __attribute__((__unused__)))
{
int num;
- Char tc;
+ wchar_t ch;
tty_quotemode(el);
- num = FUN(el,getc)(el, &tc);
- c = tc;
+ num = el_wgetc(el, &ch);
tty_noquotemode(el);
if (num == 1)
- return ed_insert(el, c);
+ return ed_insert(el, ch);
else
return ed_end_of_file(el, 0);
}
@@ -375,11 +382,11 @@
/* ed_digit():
* Adds to argument or enters a digit
*/
-protected el_action_t
-ed_digit(EditLine *el, Int c)
+libedit_private el_action_t
+ed_digit(EditLine *el, wint_t c)
{
- if (!Isdigit(c))
+ if (!iswdigit(c))
return CC_ERROR;
if (el->el_state.doingarg) {
@@ -403,11 +410,11 @@
* Digit that starts argument
* For ESC-n
*/
-protected el_action_t
-ed_argument_digit(EditLine *el, Int c)
+libedit_private el_action_t
+ed_argument_digit(EditLine *el, wint_t c)
{
- if (!Isdigit(c))
+ if (!iswdigit(c))
return CC_ERROR;
if (el->el_state.doingarg) {
@@ -427,112 +434,24 @@
* Indicates unbound character
* Bound to keys that are not assigned
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
ed_unassigned(EditLine *el __attribute__((__unused__)),
- Int c __attribute__((__unused__)))
+ wint_t c __attribute__((__unused__)))
{
return CC_ERROR;
}
-/**
- ** TTY key handling.
- **/
-
-/* ed_tty_sigint():
- * Tty interrupt character
- * [^C]
+/* ed_ignore():
+ * Input characters that have no effect
+ * [^C ^O ^Q ^S ^Z ^\ ^]] [^C ^O ^Q ^S ^\]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-ed_tty_sigint(EditLine *el __attribute__((__unused__)),
- Int c __attribute__((__unused__)))
-{
-
- return CC_NORM;
-}
-
-
-/* ed_tty_dsusp():
- * Tty delayed suspend character
- * [^Y]
- */
-protected el_action_t
-/*ARGSUSED*/
-ed_tty_dsusp(EditLine *el __attribute__((__unused__)),
- Int c __attribute__((__unused__)))
-{
-
- return CC_NORM;
-}
-
-
-/* ed_tty_flush_output():
- * Tty flush output characters
- * [^O]
- */
-protected el_action_t
-/*ARGSUSED*/
-ed_tty_flush_output(EditLine *el __attribute__((__unused__)),
- Int c __attribute__((__unused__)))
-{
-
- return CC_NORM;
-}
-
-
-/* ed_tty_sigquit():
- * Tty quit character
- * [^\]
- */
-protected el_action_t
-/*ARGSUSED*/
-ed_tty_sigquit(EditLine *el __attribute__((__unused__)),
- Int c __attribute__((__unused__)))
-{
-
- return CC_NORM;
-}
-
-
-/* ed_tty_sigtstp():
- * Tty suspend character
- * [^Z]
- */
-protected el_action_t
-/*ARGSUSED*/
-ed_tty_sigtstp(EditLine *el __attribute__((__unused__)),
- Int c __attribute__((__unused__)))
-{
-
- return CC_NORM;
-}
-
-
-/* ed_tty_stop_output():
- * Tty disallow output characters
- * [^S]
- */
-protected el_action_t
-/*ARGSUSED*/
-ed_tty_stop_output(EditLine *el __attribute__((__unused__)),
- Int c __attribute__((__unused__)))
-{
-
- return CC_NORM;
-}
-
-
-/* ed_tty_start_output():
- * Tty allow output characters
- * [^Q]
- */
-protected el_action_t
-/*ARGSUSED*/
-ed_tty_start_output(EditLine *el __attribute__((__unused__)),
- Int c __attribute__((__unused__)))
+ed_ignore(EditLine *el __attribute__((__unused__)),
+ wint_t c __attribute__((__unused__)))
{
return CC_NORM;
@@ -543,9 +462,9 @@
* Execute command
* [^J]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-ed_newline(EditLine *el, Int c __attribute__((__unused__)))
+ed_newline(EditLine *el, wint_t c __attribute__((__unused__)))
{
re_goto_bottom(el);
@@ -559,9 +478,9 @@
* Delete the character to the left of the cursor
* [^?]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-ed_delete_prev_char(EditLine *el, Int c __attribute__((__unused__)))
+ed_delete_prev_char(EditLine *el, wint_t c __attribute__((__unused__)))
{
if (el->el_line.cursor <= el->el_line.buffer)
@@ -579,9 +498,9 @@
* Clear screen leaving current line at the top
* [^L]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-ed_clear_screen(EditLine *el, Int c __attribute__((__unused__)))
+ed_clear_screen(EditLine *el, wint_t c __attribute__((__unused__)))
{
terminal_clear_screen(el); /* clear the whole real screen */
@@ -594,10 +513,10 @@
* Redisplay everything
* ^R
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-ed_redisplay(EditLine *el __attribute__((__unused__)),
- Int c __attribute__((__unused__)))
+ed_redisplay(EditLine *el __attribute__((__unused__)),
+ wint_t c __attribute__((__unused__)))
{
return CC_REDISPLAY;
@@ -608,12 +527,12 @@
* Erase current line and start from scratch
* [^G]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-ed_start_over(EditLine *el, Int c __attribute__((__unused__)))
+ed_start_over(EditLine *el, wint_t c __attribute__((__unused__)))
{
- ch_reset(el, 0);
+ ch_reset(el);
return CC_REFRESH;
}
@@ -622,10 +541,10 @@
* First character in a bound sequence
* Placeholder for external keys
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-ed_sequence_lead_in(EditLine *el __attribute__((__unused__)),
- Int c __attribute__((__unused__)))
+ed_sequence_lead_in(EditLine *el __attribute__((__unused__)),
+ wint_t c __attribute__((__unused__)))
{
return CC_NORM;
@@ -636,9 +555,9 @@
* Move to the previous history line
* [^P] [k]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-ed_prev_history(EditLine *el, Int c __attribute__((__unused__)))
+ed_prev_history(EditLine *el, wint_t c __attribute__((__unused__)))
{
char beep = 0;
int sv_event = el->el_history.eventno;
@@ -648,7 +567,7 @@
if (el->el_history.eventno == 0) { /* save the current buffer
* away */
- (void) Strncpy(el->el_history.buf, el->el_line.buffer,
+ (void) wcsncpy(el->el_history.buf, el->el_line.buffer,
EL_BUFSIZ);
el->el_history.last = el->el_history.buf +
(el->el_line.lastchar - el->el_line.buffer);
@@ -658,7 +577,6 @@
if (hist_get(el) == CC_ERROR) {
if (el->el_map.type == MAP_VI) {
el->el_history.eventno = sv_event;
-
}
beep = 1;
/* el->el_history.eventno was fixed by first call */
@@ -674,9 +592,9 @@
* Move to the next history line
* [^N] [j]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-ed_next_history(EditLine *el, Int c __attribute__((__unused__)))
+ed_next_history(EditLine *el, wint_t c __attribute__((__unused__)))
{
el_action_t beep = CC_REFRESH, rval;
@@ -701,13 +619,13 @@
* Search previous in history for a line matching the current
* next search history [M-P] [K]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-ed_search_prev_history(EditLine *el, Int c __attribute__((__unused__)))
+ed_search_prev_history(EditLine *el, wint_t c __attribute__((__unused__)))
{
- const Char *hp;
+ const wchar_t *hp;
int h;
- bool_t found = 0;
+ int found = 0;
el->el_chared.c_vcmd.action = NOP;
el->el_chared.c_undo.len = -1;
@@ -721,7 +639,7 @@
return CC_ERROR;
}
if (el->el_history.eventno == 0) {
- (void) Strncpy(el->el_history.buf, el->el_line.buffer,
+ (void) wcsncpy(el->el_history.buf, el->el_line.buffer,
EL_BUFSIZ);
el->el_history.last = el->el_history.buf +
(el->el_line.lastchar - el->el_line.buffer);
@@ -742,11 +660,11 @@
#ifdef SDEBUG
(void) fprintf(el->el_errfile, "Comparing with \"%s\"\n", hp);
#endif
- if ((Strncmp(hp, el->el_line.buffer, (size_t)
+ if ((wcsncmp(hp, el->el_line.buffer, (size_t)
(el->el_line.lastchar - el->el_line.buffer)) ||
hp[el->el_line.lastchar - el->el_line.buffer]) &&
c_hmatch(el, hp)) {
- found++;
+ found = 1;
break;
}
h++;
@@ -769,13 +687,13 @@
* Search next in history for a line matching the current
* [M-N] [J]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-ed_search_next_history(EditLine *el, Int c __attribute__((__unused__)))
+ed_search_next_history(EditLine *el, wint_t c __attribute__((__unused__)))
{
- const Char *hp;
+ const wchar_t *hp;
int h;
- bool_t found = 0;
+ int found = 0;
el->el_chared.c_vcmd.action = NOP;
el->el_chared.c_undo.len = -1;
@@ -797,7 +715,7 @@
#ifdef SDEBUG
(void) fprintf(el->el_errfile, "Comparing with \"%s\"\n", hp);
#endif
- if ((Strncmp(hp, el->el_line.buffer, (size_t)
+ if ((wcsncmp(hp, el->el_line.buffer, (size_t)
(el->el_line.lastchar - el->el_line.buffer)) ||
hp[el->el_line.lastchar - el->el_line.buffer]) &&
c_hmatch(el, hp))
@@ -823,11 +741,11 @@
* Move up one line
* Could be [k] [^p]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-ed_prev_line(EditLine *el, Int c __attribute__((__unused__)))
+ed_prev_line(EditLine *el, wint_t c __attribute__((__unused__)))
{
- Char *ptr;
+ wchar_t *ptr;
int nchars = c_hpos(el);
/*
@@ -866,11 +784,11 @@
* Move down one line
* Could be [j] [^n]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-ed_next_line(EditLine *el, Int c __attribute__((__unused__)))
+ed_next_line(EditLine *el, wint_t c __attribute__((__unused__)))
{
- Char *ptr;
+ wchar_t *ptr;
int nchars = c_hpos(el);
/*
@@ -900,14 +818,14 @@
* Editline extended command
* [M-X] [:]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-ed_command(EditLine *el, Int c __attribute__((__unused__)))
+ed_command(EditLine *el, wint_t c __attribute__((__unused__)))
{
- Char tmpbuf[EL_BUFSIZ];
+ wchar_t tmpbuf[EL_BUFSIZ];
int tmplen;
- tmplen = c_gets(el, tmpbuf, STR("\n: "));
+ tmplen = c_gets(el, tmpbuf, L"\n: ");
terminal__putc(el, '\n');
if (tmplen < 0 || (tmpbuf[tmplen] = 0, parse_line(el, tmpbuf)) == -1)
diff --git a/src/editline/readline.h b/src/editline/readline.h
index 932febb..5f101e7 100644
--- a/src/editline/readline.h
+++ b/src/editline/readline.h
@@ -1,4 +1,4 @@
-/* $NetBSD: readline.h,v 1.34 2013/05/28 00:10:34 christos Exp $ */
+/* $NetBSD: readline.h,v 1.45 2019/02/15 23:20:35 christos Exp $ */
/*-
* Copyright (c) 1997 The NetBSD Foundation, Inc.
@@ -38,12 +38,13 @@
/* typedefs */
typedef int Function(const char *, int);
+typedef char *CPFunction(const char *, int);
typedef void VFunction(void);
-typedef void VCPFunction(char *);
-typedef char *CPFunction(const char *, int);
-typedef char **CPPFunction(const char *, int, int);
+typedef void rl_vcpfunc_t(char *);
+typedef char **rl_completion_func_t(const char *, int, int);
typedef char *rl_compentry_func_t(const char *, int);
typedef int rl_command_func_t(int, int);
+typedef int rl_hook_func_t(void);
/* only supports length */
typedef struct {
@@ -54,7 +55,7 @@
typedef struct _hist_entry {
const char *line;
- histdata_t data;
+ histdata_t data;
} HIST_ENTRY;
typedef struct _keymap_entry {
@@ -88,7 +89,7 @@
#define RUBOUT 0x7f
#define ABORT_CHAR CTRL('G')
-#define RL_READLINE_VERSION 0x0402
+#define RL_READLINE_VERSION 0x0402
#define RL_PROMPT_START_IGNORE '\1'
#define RL_PROMPT_END_IGNORE '\2'
@@ -97,24 +98,24 @@
extern "C" {
#endif
extern const char *rl_library_version;
-extern int rl_readline_version;
-extern char *rl_readline_name;
+extern int rl_readline_version;
+extern const char *rl_readline_name;
extern FILE *rl_instream;
extern FILE *rl_outstream;
extern char *rl_line_buffer;
extern int rl_point, rl_end;
extern int history_base, history_length;
extern int max_input_history;
-extern char *rl_basic_word_break_characters;
+extern const char *rl_basic_word_break_characters;
extern char *rl_completer_word_break_characters;
extern char *rl_completer_quote_characters;
-extern Function *rl_completion_entry_function;
+extern rl_compentry_func_t *rl_completion_entry_function;
extern char *(*rl_completion_word_break_hook)(void);
-extern CPPFunction *rl_attempted_completion_function;
+extern rl_completion_func_t *rl_attempted_completion_function;
extern int rl_attempted_completion_over;
extern int rl_completion_type;
extern int rl_completion_query_items;
-extern char *rl_special_prefixes;
+extern const char *rl_special_prefixes;
extern int rl_completion_append_character;
extern int rl_inhibit_completion;
extern Function *rl_pre_input_hook;
@@ -122,6 +123,7 @@
extern char *rl_terminal_name;
extern int rl_already_prompted;
extern char *rl_prompt;
+extern int rl_done;
/*
* The following is not implemented
*/
@@ -137,6 +139,7 @@
extern VFunction *rl_completion_display_matches_hook;
extern VFunction *rl_prep_term_function;
extern VFunction *rl_deprep_term_function;
+extern rl_hook_func_t *rl_event_hook;
extern int readline_echoing_p;
extern int _rl_print_completions_horizontally;
@@ -147,6 +150,7 @@
void using_history(void);
int add_history(const char *);
void clear_history(void);
+int append_history(int, const char *);
void stifle_history(int);
int unstifle_history(void);
int history_is_stifled(void);
@@ -159,6 +163,7 @@
int history_set_pos(int);
HIST_ENTRY *previous_history(void);
HIST_ENTRY *next_history(void);
+HIST_ENTRY **history_list(void);
int history_search(const char *, int);
int history_search_prefix(const char *, int);
int history_search_pos(const char *, int, int);
@@ -175,16 +180,17 @@
char *username_completion_function(const char *, int);
int rl_complete(int, int);
int rl_read_key(void);
-char **completion_matches(const char *, CPFunction *);
+char **completion_matches(/* const */ char *, rl_compentry_func_t *);
void rl_display_match_list(char **, int, int);
int rl_insert(int, int);
int rl_insert_text(const char *);
-void rl_reset_terminal(const char *);
+int rl_reset_terminal(const char *);
+void rl_resize_terminal(void);
int rl_bind_key(int, rl_command_func_t *);
int rl_newline(int, int);
void rl_callback_read_char(void);
-void rl_callback_handler_install(const char *, VCPFunction *);
+void rl_callback_handler_install(const char *, rl_vcpfunc_t *);
void rl_callback_handler_remove(void);
void rl_redisplay(void);
int rl_get_previous_history(int, int);
@@ -193,18 +199,20 @@
int rl_read_init_file(const char *);
int rl_parse_and_bind(const char *);
int rl_variable_bind(const char *, const char *);
-void rl_stuff_char(int);
-int rl_add_defun(const char *, Function *, int);
+int rl_stuff_char(int);
+int rl_add_defun(const char *, rl_command_func_t *, int);
HISTORY_STATE *history_get_history_state(void);
void rl_get_screen_size(int *, int *);
void rl_set_screen_size(int, int);
-char *rl_filename_completion_function (const char *, int);
+char *rl_filename_completion_function (const char *, int);
int _rl_abort_internal(void);
int _rl_qsort_string_compare(char **, char **);
-char **rl_completion_matches(const char *, rl_compentry_func_t *);
+char **rl_completion_matches(const char *, rl_compentry_func_t *);
void rl_forced_update_display(void);
int rl_set_prompt(const char *);
int rl_on_new_line(void);
+void rl_reset_after_signal(void);
+void rl_echo_signal_char(int);
/*
* The following are not implemented
@@ -217,6 +225,8 @@
int rl_bind_key_in_map(int, rl_command_func_t *, Keymap);
void rl_cleanup_after_signal(void);
void rl_free_line_state(void);
+int rl_set_keyboard_input_timeout(int);
+
#ifdef __cplusplus
}
#endif
diff --git a/src/el.c b/src/el.c
index 3726b9b..47f25c2 100644
--- a/src/el.c
+++ b/src/el.c
@@ -1,4 +1,4 @@
-/* $NetBSD: el.c,v 1.72 2013/01/22 20:23:21 christos Exp $ */
+/* $NetBSD: el.c,v 1.97 2018/11/18 17:09:39 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -37,7 +37,7 @@
#if 0
static char sccsid[] = "@(#)el.c 8.2 (Berkeley) 1/3/94";
#else
-__RCSID("$NetBSD: el.c,v 1.72 2013/01/22 20:23:21 christos Exp $");
+__RCSID("$NetBSD: el.c,v 1.97 2018/11/18 17:09:39 christos Exp $");
#endif
#endif /* not lint && not SCCSID */
@@ -50,13 +50,16 @@
*/
#include <sys/types.h>
#include <sys/param.h>
-#include <string.h>
-#include <stdlib.h>
-#include <stdarg.h>
#include <ctype.h>
-#include <locale.h>
#include <langinfo.h>
+#include <locale.h>
+#include <stdarg.h>
+#include <stdlib.h>
+#include <string.h>
+
#include "el.h"
+#include "parse.h"
+#include "read.h"
#ifndef HAVE_SECURE_GETENV
# ifdef HAVE___SECURE_GETENV
@@ -84,16 +87,16 @@
/* el_init():
* Initialize editline and set default parameters.
*/
-public EditLine *
+EditLine *
el_init(const char *prog, FILE *fin, FILE *fout, FILE *ferr)
{
return el_init_fd(prog, fin, fout, ferr, fileno(fin), fileno(fout),
fileno(ferr));
}
-public EditLine *
-el_init_fd(const char *prog, FILE *fin, FILE *fout, FILE *ferr,
- int fdin, int fdout, int fderr)
+libedit_private EditLine *
+el_init_internal(const char *prog, FILE *fin, FILE *fout, FILE *ferr,
+ int fdin, int fdout, int fderr, int flags)
{
EditLine *el = el_malloc(sizeof(*el));
@@ -110,7 +113,7 @@
el->el_outfd = fdout;
el->el_errfd = fderr;
- el->el_prog = Strdup(ct_decode_string(prog, &el->el_scratch));
+ el->el_prog = wcsdup(ct_decode_string(prog, &el->el_scratch));
if (el->el_prog == NULL) {
el_free(el);
return NULL;
@@ -119,13 +122,7 @@
/*
* Initialize all the modules. Order is important!!!
*/
- el->el_flags = 0;
-#ifdef WIDECHAR
- if (setlocale(LC_CTYPE, NULL) != NULL){
- if (strcmp(nl_langinfo(CODESET), "UTF-8") == 0)
- el->el_flags |= CHARSET_IS_UTF8;
- }
-#endif
+ el->el_flags = flags;
if (terminal_init(el) == -1) {
el_free(el->el_prog);
@@ -141,16 +138,25 @@
(void) hist_init(el);
(void) prompt_init(el);
(void) sig_init(el);
- (void) read_init(el);
-
+ (void) literal_init(el);
+ if (read_init(el) == -1) {
+ el_end(el);
+ return NULL;
+ }
return el;
}
+EditLine *
+el_init_fd(const char *prog, FILE *fin, FILE *fout, FILE *ferr,
+ int fdin, int fdout, int fderr)
+{
+ return el_init_internal(prog, fin, fout, ferr, fdin, fdout, fderr, 0);
+}
/* el_end():
* Clean up.
*/
-public void
+void
el_end(EditLine *el)
{
@@ -162,20 +168,23 @@
terminal_end(el);
keymacro_end(el);
map_end(el);
- tty_end(el);
+ if (!(el->el_flags & NO_TTY))
+ tty_end(el, TCSAFLUSH);
ch_end(el);
+ read_end(el->el_read);
search_end(el);
hist_end(el);
prompt_end(el);
sig_end(el);
+ literal_end(el);
el_free(el->el_prog);
-#ifdef WIDECHAR
+ el_free(el->el_visual.cbuff);
+ el_free(el->el_visual.wbuff);
el_free(el->el_scratch.cbuff);
el_free(el->el_scratch.wbuff);
el_free(el->el_lgcyconv.cbuff);
el_free(el->el_lgcyconv.wbuff);
-#endif
el_free(el);
}
@@ -183,20 +192,20 @@
/* el_reset():
* Reset the tty and the parser
*/
-public void
+void
el_reset(EditLine *el)
{
tty_cookedmode(el);
- ch_reset(el, 0); /* XXX: Do we want that? */
+ ch_reset(el); /* XXX: Do we want that? */
}
/* el_set():
* set the editline parameters
*/
-public int
-FUN(el,set)(EditLine *el, int op, ...)
+int
+el_wset(EditLine *el, int op, ...)
{
va_list ap;
int rv = 0;
@@ -221,12 +230,19 @@
break;
}
+ case EL_ALIAS_TEXT: {
+ el_afunc_t p = va_arg(ap, el_afunc_t);
+ void *arg = va_arg(ap, void *);
+ rv = ch_aliasfun(el, p, arg);
+ break;
+ }
+
case EL_PROMPT_ESC:
case EL_RPROMPT_ESC: {
el_pfunc_t p = va_arg(ap, el_pfunc_t);
int c = va_arg(ap, int);
- rv = prompt_set(el, p, c, op, 1);
+ rv = prompt_set(el, p, (wchar_t)c, op, 1);
break;
}
@@ -235,7 +251,7 @@
break;
case EL_EDITOR:
- rv = map_set_editor(el, va_arg(ap, Char *));
+ rv = map_set_editor(el, va_arg(ap, wchar_t *));
break;
case EL_SIGNAL:
@@ -251,36 +267,36 @@
case EL_ECHOTC:
case EL_SETTY:
{
- const Char *argv[20];
+ const wchar_t *argv[20];
int i;
for (i = 1; i < (int)__arraycount(argv); i++)
- if ((argv[i] = va_arg(ap, Char *)) == NULL)
+ if ((argv[i] = va_arg(ap, wchar_t *)) == NULL)
break;
switch (op) {
case EL_BIND:
- argv[0] = STR("bind");
+ argv[0] = L"bind";
rv = map_bind(el, i, argv);
break;
case EL_TELLTC:
- argv[0] = STR("telltc");
+ argv[0] = L"telltc";
rv = terminal_telltc(el, i, argv);
break;
case EL_SETTC:
- argv[0] = STR("settc");
+ argv[0] = L"settc";
rv = terminal_settc(el, i, argv);
break;
case EL_ECHOTC:
- argv[0] = STR("echotc");
+ argv[0] = L"echotc";
rv = terminal_echotc(el, i, argv);
break;
case EL_SETTY:
- argv[0] = STR("setty");
+ argv[0] = L"setty";
rv = tty_stty(el, i, argv);
break;
@@ -294,8 +310,8 @@
case EL_ADDFN:
{
- Char *name = va_arg(ap, Char *);
- Char *help = va_arg(ap, Char *);
+ wchar_t *name = va_arg(ap, wchar_t *);
+ wchar_t *help = va_arg(ap, wchar_t *);
el_func_t func = va_arg(ap, el_func_t);
rv = map_addfunc(el, name, help, func);
@@ -308,7 +324,7 @@
void *ptr = va_arg(ap, void *);
rv = hist_set(el, func, ptr);
- if (!(el->el_flags & CHARSET_IS_UTF8))
+ if (MB_CUR_MAX == 1)
el->el_flags &= ~NARROW_HISTORY;
break;
}
@@ -324,8 +340,7 @@
case EL_GETCFN:
{
el_rfunc_t rc = va_arg(ap, el_rfunc_t);
- rv = el_read_setfn(el, rc);
- el->el_flags &= ~NARROW_READ;
+ rv = el_read_setfn(el->el_read, rc);
break;
}
@@ -402,8 +417,8 @@
/* el_get():
* retrieve the editline parameters
*/
-public int
-FUN(el,get)(EditLine *el, int op, ...)
+int
+el_wget(EditLine *el, int op, ...)
{
va_list ap;
int rv;
@@ -423,14 +438,14 @@
case EL_PROMPT_ESC:
case EL_RPROMPT_ESC: {
el_pfunc_t *p = va_arg(ap, el_pfunc_t *);
- Char *c = va_arg(ap, Char *);
+ wchar_t *c = va_arg(ap, wchar_t *);
rv = prompt_get(el, p, c, op);
break;
}
case EL_EDITOR:
- rv = map_get_editor(el, va_arg(ap, const Char **));
+ rv = map_get_editor(el, va_arg(ap, const wchar_t **));
break;
case EL_SIGNAL:
@@ -454,7 +469,7 @@
char *argv[20];
int i;
- for (i = 1; i < (int)__arraycount(argv); i++)
+ for (i = 1; i < (int)__arraycount(argv); i++)
if ((argv[i] = va_arg(ap, char *)) == NULL)
break;
@@ -464,7 +479,7 @@
}
case EL_GETCFN:
- *va_arg(ap, el_rfunc_t *) = el_read_getfn(el);
+ *va_arg(ap, el_rfunc_t *) = el_read_getfn(el->el_read);
rv = 0;
break;
@@ -515,40 +530,59 @@
/* el_line():
* Return editing info
*/
-public const TYPE(LineInfo) *
-FUN(el,line)(EditLine *el)
+const LineInfoW *
+el_wline(EditLine *el)
{
- return (const TYPE(LineInfo) *)(void *)&el->el_line;
+ return (const LineInfoW *)(void *)&el->el_line;
}
/* el_source():
* Source a file
*/
-public int
+int
el_source(EditLine *el, const char *fname)
{
FILE *fp;
size_t len;
+ ssize_t slen;
char *ptr;
char *path = NULL;
- const Char *dptr;
+ const wchar_t *dptr;
int error = 0;
fp = NULL;
if (fname == NULL) {
- static const char elpath[] = "/.editrc";
- size_t plen = sizeof(elpath);
+#ifdef HAVE_ISSETUGID
+ if (issetugid())
+ return -1;
- if ((ptr = secure_getenv("HOME")) == NULL)
- return -1;
- plen += strlen(ptr);
- if ((path = el_malloc(plen * sizeof(*path))) == NULL)
- return -1;
- (void)snprintf(path, plen, "%s%s", ptr, elpath);
- fname = path;
+ if ((fname = getenv("EDITRC")) == NULL) {
+ static const char elpath[] = "/.editrc";
+ size_t plen = sizeof(elpath);
+
+ if ((ptr = getenv("HOME")) == NULL)
+ return -1;
+ plen += strlen(ptr);
+ if ((path = el_malloc(plen * sizeof(*path))) == NULL)
+ return -1;
+ (void)snprintf(path, plen, "%s%s", ptr,
+ elpath + (*ptr == '\0'));
+ fname = path;
+ }
+#else
+ /*
+ * If issetugid() is missing, always return an error, in order
+ * to keep from inadvertently opening up the user to a security
+ * hole.
+ */
+ return -1;
+#endif
}
+ if (fname[0] == '\0')
+ return -1;
+
if (fp == NULL)
fp = fopen(fname, "r");
if (fp == NULL) {
@@ -556,23 +590,26 @@
return -1;
}
- while ((ptr = fgetln(fp, &len)) != NULL) {
+ ptr = NULL;
+ len = 0;
+ while ((slen = getline(&ptr, &len, fp)) != -1) {
if (*ptr == '\n')
continue; /* Empty line. */
+ if (slen > 0 && ptr[--slen] == '\n')
+ ptr[slen] = '\0';
+
dptr = ct_decode_string(ptr, &el->el_scratch);
if (!dptr)
continue;
- if (len > 0 && dptr[len - 1] == '\n')
- --len;
-
/* loop until first non-space char or EOL */
- while (*dptr != '\0' && Isspace(*dptr))
+ while (*dptr != '\0' && iswspace(*dptr))
dptr++;
if (*dptr == '#')
continue; /* ignore, this is a comment line */
if ((error = parse_line(el, dptr)) == -1)
break;
}
+ free(ptr);
el_free(path);
(void) fclose(fp);
@@ -583,7 +620,7 @@
/* el_resize():
* Called from program when terminal is resized
*/
-public void
+void
el_resize(EditLine *el)
{
int lins, cols;
@@ -604,7 +641,7 @@
/* el_beep():
* Called from the program to beep
*/
-public void
+void
el_beep(EditLine *el)
{
@@ -615,25 +652,25 @@
/* el_editmode()
* Set the state of EDIT_DISABLED from the `edit' command.
*/
-protected int
+libedit_private int
/*ARGSUSED*/
-el_editmode(EditLine *el, int argc, const Char **argv)
+el_editmode(EditLine *el, int argc, const wchar_t **argv)
{
- const Char *how;
+ const wchar_t *how;
if (argv == NULL || argc != 2 || argv[1] == NULL)
return -1;
how = argv[1];
- if (Strcmp(how, STR("on")) == 0) {
+ if (wcscmp(how, L"on") == 0) {
el->el_flags &= ~EDIT_DISABLED;
tty_rawmode(el);
- } else if (Strcmp(how, STR("off")) == 0) {
+ } else if (wcscmp(how, L"off") == 0) {
tty_cookedmode(el);
el->el_flags |= EDIT_DISABLED;
}
else {
- (void) fprintf(el->el_errfile, "edit: Bad value `" FSTR "'.\n",
+ (void) fprintf(el->el_errfile, "edit: Bad value `%ls'.\n",
how);
return -1;
}
diff --git a/src/el.h b/src/el.h
index 70c67b8..2e348bd 100644
--- a/src/el.h
+++ b/src/el.h
@@ -1,4 +1,4 @@
-/* $NetBSD: el.h,v 1.25 2011/07/29 23:44:44 christos Exp $ */
+/* $NetBSD: el.h,v 1.44 2018/11/18 17:09:39 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -48,8 +48,6 @@
#include "histedit.h"
#include "chartype.h"
-#include <stdio.h>
-#include <sys/types.h>
#define EL_BUFSIZ ((size_t)1024) /* Maximum line size */
@@ -57,12 +55,8 @@
#define NO_TTY 0x02
#define EDIT_DISABLED 0x04
#define UNBUFFERED 0x08
-#define CHARSET_IS_UTF8 0x10
-#define IGNORE_EXTCHARS 0x20 /* Ignore characters read > 0xff */
#define NARROW_HISTORY 0x40
-#define NARROW_READ 0x80
-
-typedef int bool_t; /* True or not */
+#define NO_RESET 0x80
typedef unsigned char el_action_t; /* Index to command array */
@@ -72,10 +66,10 @@
} coord_t;
typedef struct el_line_t {
- Char *buffer; /* Input line */
- Char *cursor; /* Cursor position */
- Char *lastchar; /* Last character */
- const Char *limit; /* Max position */
+ wchar_t *buffer; /* Input line */
+ wchar_t *cursor; /* Cursor position */
+ wchar_t *lastchar; /* Last character */
+ const wchar_t *limit; /* Max position */
} el_line_t;
/*
@@ -87,8 +81,8 @@
int argument; /* Numeric argument */
int metanext; /* Is the next char a meta char */
el_action_t lastcmd; /* Previous command */
- el_action_t thiscmd; /* this command */
- Char thisch; /* char that generated it */
+ el_action_t thiscmd; /* this command */
+ wchar_t thisch; /* char that generated it */
} el_state_t;
/*
@@ -100,21 +94,20 @@
#include "tty.h"
#include "prompt.h"
+#include "literal.h"
#include "keymacro.h"
#include "terminal.h"
#include "refresh.h"
#include "chared.h"
-#include "common.h"
#include "search.h"
#include "hist.h"
#include "map.h"
-#include "parse.h"
#include "sig.h"
-#include "help.h"
-#include "read.h"
+
+struct el_read_t;
struct editline {
- Char *el_prog; /* the program name */
+ wchar_t *el_prog; /* the program name */
FILE *el_infile; /* Stdio stuff */
FILE *el_outfile; /* Stdio stuff */
FILE *el_errfile; /* Stdio stuff */
@@ -122,10 +115,9 @@
int el_outfd; /* Output file descriptor */
int el_errfd; /* Error file descriptor */
int el_flags; /* Various flags. */
- int el_errno; /* Local copy of errno */
coord_t el_cursor; /* Cursor location */
- Char **el_display; /* Real screen image = what is there */
- Char **el_vdisplay; /* Virtual screen image = what we see */
+ wint_t **el_display; /* Real screen image = what is there */
+ wint_t **el_vdisplay; /* Virtual screen image = what we see */
void *el_data; /* Client data */
el_line_t el_line; /* The current line information */
el_state_t el_state; /* Current editor state */
@@ -134,21 +126,23 @@
el_refresh_t el_refresh; /* Refresh stuff */
el_prompt_t el_prompt; /* Prompt stuff */
el_prompt_t el_rprompt; /* Prompt stuff */
+ el_literal_t el_literal; /* prompt literal bits */
el_chared_t el_chared; /* Characted editor stuff */
el_map_t el_map; /* Key mapping stuff */
el_keymacro_t el_keymacro; /* Key binding stuff */
el_history_t el_history; /* History stuff */
el_search_t el_search; /* Search stuff */
el_signal_t el_signal; /* Signal handling stuff */
- el_read_t el_read; /* Character reading stuff */
-#ifdef WIDECHAR
+ struct el_read_t *el_read; /* Character reading stuff */
+ ct_buffer_t el_visual; /* Buffer for displayable str */
ct_buffer_t el_scratch; /* Scratch conversion buffer */
ct_buffer_t el_lgcyconv; /* Buffer for legacy wrappers */
LineInfo el_lgcylinfo; /* Legacy LineInfo buffer */
-#endif
};
-protected int el_editmode(EditLine *, int, const Char **);
+libedit_private int el_editmode(EditLine *, int, const wchar_t **);
+libedit_private EditLine *el_init_internal(const char *, FILE *, FILE *,
+ FILE *, int, int, int, int);
#ifdef DEBUG
#define EL_ABORT(a) do { \
diff --git a/src/eln.c b/src/eln.c
index 1b829c2..aa0a5b5 100644
--- a/src/eln.c
+++ b/src/eln.c
@@ -1,4 +1,4 @@
-/* $NetBSD: eln.c,v 1.14 2012/03/11 21:15:25 christos Exp $ */
+/* $NetBSD: eln.c,v 1.34 2016/05/09 21:37:34 christos Exp $ */
/*-
* Copyright (c) 2009 The NetBSD Foundation, Inc.
@@ -12,13 +12,6 @@
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- * must display the following acknowledgement:
- * This product includes software developed by the NetBSD
- * Foundation, Inc. and its contributors.
- * 4. Neither the name of The NetBSD Foundation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
@@ -34,35 +27,38 @@
*/
#include "config.h"
#if !defined(lint) && !defined(SCCSID)
-__RCSID("$NetBSD: eln.c,v 1.14 2012/03/11 21:15:25 christos Exp $");
+__RCSID("$NetBSD: eln.c,v 1.34 2016/05/09 21:37:34 christos Exp $");
#endif /* not lint && not SCCSID */
-#include "histedit.h"
-#include "el.h"
-#include "read.h"
+#include <errno.h>
#include <stdarg.h>
#include <stdio.h>
#include <stdlib.h>
-public int
+#include "el.h"
+
+int
el_getc(EditLine *el, char *cp)
{
int num_read;
wchar_t wc = 0;
- if (!(el->el_flags & CHARSET_IS_UTF8))
- el->el_flags |= IGNORE_EXTCHARS;
- num_read = el_wgetc (el, &wc);
- if (!(el->el_flags & CHARSET_IS_UTF8))
- el->el_flags &= ~IGNORE_EXTCHARS;
-
- if (num_read > 0)
- *cp = (char)wc;
- return num_read;
+ num_read = el_wgetc(el, &wc);
+ *cp = '\0';
+ if (num_read <= 0)
+ return num_read;
+ num_read = wctob(wc);
+ if (num_read == EOF) {
+ errno = ERANGE;
+ return -1;
+ } else {
+ *cp = (char)num_read;
+ return 1;
+ }
}
-public void
+void
el_push(EditLine *el, const char *str)
{
/* Using multibyte->wide string decoding works fine under single-byte
@@ -71,36 +67,41 @@
}
-public const char *
+const char *
el_gets(EditLine *el, int *nread)
{
const wchar_t *tmp;
- el->el_flags |= IGNORE_EXTCHARS;
tmp = el_wgets(el, nread);
- el->el_flags &= ~IGNORE_EXTCHARS;
+ if (tmp != NULL) {
+ int i;
+ size_t nwread = 0;
+
+ for (i = 0; i < *nread; i++)
+ nwread += ct_enc_width(tmp[i]);
+ *nread = (int)nwread;
+ }
return ct_encode_string(tmp, &el->el_lgcyconv);
}
-public int
+int
el_parse(EditLine *el, int argc, const char *argv[])
{
int ret;
const wchar_t **wargv;
- wargv = (const wchar_t **)
- ct_decode_argv(argc, argv, &el->el_lgcyconv);
+ wargv = (void *)ct_decode_argv(argc, argv, &el->el_lgcyconv);
if (!wargv)
return -1;
ret = el_wparse(el, argc, wargv);
- ct_free_argv(wargv);
+ el_free(wargv);
return ret;
}
-public int
+int
el_set(EditLine *el, int op, ...)
{
va_list ap;
@@ -125,6 +126,22 @@
break;
}
+ case EL_ALIAS_TEXT: {
+ el_afunc_t p = va_arg(ap, el_afunc_t);
+ void *arg = va_arg(ap, void *);
+ ret = ch_aliasfun(el, p, arg);
+ break;
+ }
+
+ case EL_PROMPT_ESC:
+ case EL_RPROMPT_ESC: {
+ el_pfunc_t p = va_arg(ap, el_pfunc_t);
+ int c = va_arg(ap, int);
+
+ ret = prompt_set(el, p, c, op, 0);
+ break;
+ }
+
case EL_TERMINAL: /* const char * */
ret = el_wset(el, op, va_arg(ap, char *));
break;
@@ -149,12 +166,11 @@
const char *argv[20];
int i;
const wchar_t **wargv;
- for (i = 1; i < (int)__arraycount(argv); ++i)
- if ((argv[i] = va_arg(ap, char *)) == NULL)
+ for (i = 1; i < (int)__arraycount(argv) - 1; ++i)
+ if ((argv[i] = va_arg(ap, const char *)) == NULL)
break;
- argv[0] = NULL;
- wargv = (const wchar_t **)
- ct_decode_argv(i + 1, argv, &el->el_lgcyconv);
+ argv[0] = argv[i] = NULL;
+ wargv = (void *)ct_decode_argv(i + 1, argv, &el->el_lgcyconv);
if (!wargv) {
ret = -1;
goto out;
@@ -166,29 +182,29 @@
*/
switch (op) {
case EL_BIND:
- wargv[0] = STR("bind");
+ wargv[0] = L"bind";
ret = map_bind(el, i, wargv);
break;
case EL_TELLTC:
- wargv[0] = STR("telltc");
+ wargv[0] = L"telltc";
ret = terminal_telltc(el, i, wargv);
break;
case EL_SETTC:
- wargv[0] = STR("settc");
+ wargv[0] = L"settc";
ret = terminal_settc(el, i, wargv);
break;
case EL_ECHOTC:
- wargv[0] = STR("echotc");
+ wargv[0] = L"echotc";
ret = terminal_echotc(el, i, wargv);
break;
case EL_SETTY:
- wargv[0] = STR("setty");
+ wargv[0] = L"setty";
ret = tty_stty(el, i, wargv);
break;
default:
ret = -1;
}
- ct_free_argv(wargv);
+ el_free(wargv);
break;
}
@@ -207,10 +223,10 @@
ret = -1;
goto out;
}
- // XXX: The two strdup's leak
- ret = map_addfunc(el, Strdup(wargv[0]), Strdup(wargv[1]),
+ /* XXX: The two strdup's leak */
+ ret = map_addfunc(el, wcsdup(wargv[0]), wcsdup(wargv[1]),
func);
- ct_free_argv(wargv);
+ el_free(wargv);
break;
}
case EL_HIST: { /* hist_fun_t, const char * */
@@ -220,27 +236,29 @@
el->el_flags |= NARROW_HISTORY;
break;
}
- /* XXX: do we need to change el_rfunc_t? */
+
case EL_GETCFN: /* el_rfunc_t */
ret = el_wset(el, op, va_arg(ap, el_rfunc_t));
- el->el_flags |= NARROW_READ;
break;
+
case EL_CLIENTDATA: /* void * */
ret = el_wset(el, op, va_arg(ap, void *));
break;
+
case EL_SETFP: { /* int, FILE * */
int what = va_arg(ap, int);
FILE *fp = va_arg(ap, FILE *);
ret = el_wset(el, op, what, fp);
break;
}
- case EL_PROMPT_ESC: /* el_pfunc_t, char */
- case EL_RPROMPT_ESC: {
- el_pfunc_t p = va_arg(ap, el_pfunc_t);
- char c = (char)va_arg(ap, int);
- ret = prompt_set(el, p, c, op, 0);
+
+ case EL_REFRESH:
+ re_clear_display(el);
+ re_refresh(el);
+ terminal__flush(el);
+ ret = 0;
break;
- }
+
default:
ret = -1;
break;
@@ -252,7 +270,7 @@
}
-public int
+int
el_get(EditLine *el, int op, ...)
{
va_list ap;
@@ -314,7 +332,6 @@
break;
}
- /* XXX: do we need to change el_rfunc_t? */
case EL_GETCFN: /* el_rfunc_t */
ret = el_wget(el, op, va_arg(ap, el_rfunc_t *));
break;
@@ -346,7 +363,7 @@
const LineInfoW *winfo = el_wline(el);
LineInfo *info = &el->el_lgcylinfo;
size_t offset;
- const Char *p;
+ const wchar_t *p;
info->buffer = ct_encode_string(winfo->buffer, &el->el_lgcyconv);
diff --git a/src/emacs.c b/src/emacs.c
index ab1e2df..0636c28 100644
--- a/src/emacs.c
+++ b/src/emacs.c
@@ -1,4 +1,4 @@
-/* $NetBSD: emacs.c,v 1.25 2011/07/29 15:16:33 christos Exp $ */
+/* $NetBSD: emacs.c,v 1.36 2016/05/09 21:46:56 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -37,22 +37,26 @@
#if 0
static char sccsid[] = "@(#)emacs.c 8.1 (Berkeley) 6/4/93";
#else
-__RCSID("$NetBSD: emacs.c,v 1.25 2011/07/29 15:16:33 christos Exp $");
+__RCSID("$NetBSD: emacs.c,v 1.36 2016/05/09 21:46:56 christos Exp $");
#endif
#endif /* not lint && not SCCSID */
/*
* emacs.c: Emacs functions
*/
+#include <ctype.h>
+
#include "el.h"
+#include "emacs.h"
+#include "fcns.h"
/* em_delete_or_list():
* Delete character under cursor or list completions if at end of line
* [^D]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-em_delete_or_list(EditLine *el, Int c)
+em_delete_or_list(EditLine *el, wint_t c)
{
if (el->el_line.cursor == el->el_line.lastchar) {
@@ -86,11 +90,11 @@
* Cut from cursor to end of current word
* [M-d]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-em_delete_next_word(EditLine *el, Int c __attribute__((__unused__)))
+em_delete_next_word(EditLine *el, wint_t c __attribute__((__unused__)))
{
- Char *cp, *p, *kp;
+ wchar_t *cp, *p, *kp;
if (el->el_line.cursor == el->el_line.lastchar)
return CC_ERROR;
@@ -115,11 +119,11 @@
* Paste cut buffer at cursor position
* [^Y]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-em_yank(EditLine *el, Int c __attribute__((__unused__)))
+em_yank(EditLine *el, wint_t c __attribute__((__unused__)))
{
- Char *kp, *cp;
+ wchar_t *kp, *cp;
if (el->el_chared.c_kill.last == el->el_chared.c_kill.buf)
return CC_NORM;
@@ -151,11 +155,11 @@
* Cut the entire line and save in cut buffer
* [^U]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-em_kill_line(EditLine *el, Int c __attribute__((__unused__)))
+em_kill_line(EditLine *el, wint_t c __attribute__((__unused__)))
{
- Char *kp, *cp;
+ wchar_t *kp, *cp;
cp = el->el_line.buffer;
kp = el->el_chared.c_kill.buf;
@@ -173,11 +177,11 @@
* Cut area between mark and cursor and save in cut buffer
* [^W]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-em_kill_region(EditLine *el, Int c __attribute__((__unused__)))
+em_kill_region(EditLine *el, wint_t c __attribute__((__unused__)))
{
- Char *kp, *cp;
+ wchar_t *kp, *cp;
if (!el->el_chared.c_kill.mark)
return CC_ERROR;
@@ -206,11 +210,11 @@
* Copy area between mark and cursor to cut buffer
* [M-W]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-em_copy_region(EditLine *el, Int c __attribute__((__unused__)))
+em_copy_region(EditLine *el, wint_t c __attribute__((__unused__)))
{
- Char *kp, *cp;
+ wchar_t *kp, *cp;
if (!el->el_chared.c_kill.mark)
return CC_ERROR;
@@ -236,8 +240,8 @@
* Exchange the two characters before the cursor
* Gosling emacs transpose chars [^T]
*/
-protected el_action_t
-em_gosmacs_transpose(EditLine *el, Int c)
+libedit_private el_action_t
+em_gosmacs_transpose(EditLine *el, wint_t c)
{
if (el->el_line.cursor > &el->el_line.buffer[1]) {
@@ -255,9 +259,9 @@
* Move next to end of current word
* [M-f]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-em_next_word(EditLine *el, Int c __attribute__((__unused__)))
+em_next_word(EditLine *el, wint_t c __attribute__((__unused__)))
{
if (el->el_line.cursor == el->el_line.lastchar)
return CC_ERROR;
@@ -280,18 +284,18 @@
* Uppercase the characters from cursor to end of current word
* [M-u]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-em_upper_case(EditLine *el, Int c __attribute__((__unused__)))
+em_upper_case(EditLine *el, wint_t c __attribute__((__unused__)))
{
- Char *cp, *ep;
+ wchar_t *cp, *ep;
ep = c__next_word(el->el_line.cursor, el->el_line.lastchar,
el->el_state.argument, ce__isword);
for (cp = el->el_line.cursor; cp < ep; cp++)
- if (Islower(*cp))
- *cp = Toupper(*cp);
+ if (iswlower(*cp))
+ *cp = towupper(*cp);
el->el_line.cursor = ep;
if (el->el_line.cursor > el->el_line.lastchar)
@@ -304,26 +308,26 @@
* Capitalize the characters from cursor to end of current word
* [M-c]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-em_capitol_case(EditLine *el, Int c __attribute__((__unused__)))
+em_capitol_case(EditLine *el, wint_t c __attribute__((__unused__)))
{
- Char *cp, *ep;
+ wchar_t *cp, *ep;
ep = c__next_word(el->el_line.cursor, el->el_line.lastchar,
el->el_state.argument, ce__isword);
for (cp = el->el_line.cursor; cp < ep; cp++) {
- if (Isalpha(*cp)) {
- if (Islower(*cp))
- *cp = Toupper(*cp);
+ if (iswalpha(*cp)) {
+ if (iswlower(*cp))
+ *cp = towupper(*cp);
cp++;
break;
}
}
for (; cp < ep; cp++)
- if (Isupper(*cp))
- *cp = Tolower(*cp);
+ if (iswupper(*cp))
+ *cp = towlower(*cp);
el->el_line.cursor = ep;
if (el->el_line.cursor > el->el_line.lastchar)
@@ -336,18 +340,18 @@
* Lowercase the characters from cursor to end of current word
* [M-l]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-em_lower_case(EditLine *el, Int c __attribute__((__unused__)))
+em_lower_case(EditLine *el, wint_t c __attribute__((__unused__)))
{
- Char *cp, *ep;
+ wchar_t *cp, *ep;
ep = c__next_word(el->el_line.cursor, el->el_line.lastchar,
el->el_state.argument, ce__isword);
for (cp = el->el_line.cursor; cp < ep; cp++)
- if (Isupper(*cp))
- *cp = Tolower(*cp);
+ if (iswupper(*cp))
+ *cp = towlower(*cp);
el->el_line.cursor = ep;
if (el->el_line.cursor > el->el_line.lastchar)
@@ -360,9 +364,9 @@
* Set the mark at cursor
* [^@]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-em_set_mark(EditLine *el, Int c __attribute__((__unused__)))
+em_set_mark(EditLine *el, wint_t c __attribute__((__unused__)))
{
el->el_chared.c_kill.mark = el->el_line.cursor;
@@ -374,11 +378,11 @@
* Exchange the cursor and mark
* [^X^X]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-em_exchange_mark(EditLine *el, Int c __attribute__((__unused__)))
+em_exchange_mark(EditLine *el, wint_t c __attribute__((__unused__)))
{
- Char *cp;
+ wchar_t *cp;
cp = el->el_line.cursor;
el->el_line.cursor = el->el_chared.c_kill.mark;
@@ -391,9 +395,9 @@
* Universal argument (argument times 4)
* [^U]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-em_universal_argument(EditLine *el, Int c __attribute__((__unused__)))
+em_universal_argument(EditLine *el, wint_t c __attribute__((__unused__)))
{ /* multiply current argument by 4 */
if (el->el_state.argument > 1000000)
@@ -408,9 +412,9 @@
* Add 8th bit to next character typed
* [<ESC>]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-em_meta_next(EditLine *el, Int c __attribute__((__unused__)))
+em_meta_next(EditLine *el, wint_t c __attribute__((__unused__)))
{
el->el_state.metanext = 1;
@@ -421,9 +425,9 @@
/* em_toggle_overwrite():
* Switch from insert to overwrite mode or vice versa
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-em_toggle_overwrite(EditLine *el, Int c __attribute__((__unused__)))
+em_toggle_overwrite(EditLine *el, wint_t c __attribute__((__unused__)))
{
el->el_state.inputmode = (el->el_state.inputmode == MODE_INSERT) ?
@@ -435,11 +439,11 @@
/* em_copy_prev_word():
* Copy current word to cursor
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-em_copy_prev_word(EditLine *el, Int c __attribute__((__unused__)))
+em_copy_prev_word(EditLine *el, wint_t c __attribute__((__unused__)))
{
- Char *cp, *oldc, *dp;
+ wchar_t *cp, *oldc, *dp;
if (el->el_line.cursor == el->el_line.buffer)
return CC_ERROR;
@@ -462,9 +466,9 @@
/* em_inc_search_next():
* Emacs incremental next search
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-em_inc_search_next(EditLine *el, Int c __attribute__((__unused__)))
+em_inc_search_next(EditLine *el, wint_t c __attribute__((__unused__)))
{
el->el_search.patlen = 0;
@@ -475,9 +479,9 @@
/* em_inc_search_prev():
* Emacs incremental reverse search
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-em_inc_search_prev(EditLine *el, Int c __attribute__((__unused__)))
+em_inc_search_prev(EditLine *el, wint_t c __attribute__((__unused__)))
{
el->el_search.patlen = 0;
@@ -489,9 +493,9 @@
* Delete the character to the left of the cursor
* [^?]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-em_delete_prev_char(EditLine *el, Int c __attribute__((__unused__)))
+em_delete_prev_char(EditLine *el, wint_t c __attribute__((__unused__)))
{
if (el->el_line.cursor <= el->el_line.buffer)
diff --git a/src/fgetln.c b/src/fgetln.c
deleted file mode 100644
index 6c4f320..0000000
--- a/src/fgetln.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/* $NetBSD: fgetln.c,v 1.9 2008/04/29 06:53:03 martin Exp $ */
-
-/*-
- * Copyright (c) 1998 The NetBSD Foundation, Inc.
- * All rights reserved.
- *
- * This code is derived from software contributed to The NetBSD Foundation
- * by Christos Zoulas.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
- * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
- * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
- * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifdef HAVE_NBTOOL_CONFIG_H
-#include "nbtool_config.h"
-#endif
-
-#if !HAVE_FGETLN
-#include "config.h"
-#include <stdlib.h>
-#ifndef HAVE_NBTOOL_CONFIG_H
-/* These headers are required, but included from nbtool_config.h */
-#include <stdio.h>
-#include <unistd.h>
-#include <errno.h>
-#include <string.h>
-#endif
-
-char *
-fgetln(FILE *fp, size_t *len)
-{
- static char *buf = NULL;
- static size_t bufsiz = 0;
- char *ptr;
-
-
- if (buf == NULL) {
- bufsiz = BUFSIZ;
- if ((buf = malloc(bufsiz)) == NULL)
- return NULL;
- }
-
- if (fgets(buf, bufsiz, fp) == NULL)
- return NULL;
-
- *len = 0;
- while ((ptr = strchr(&buf[*len], '\n')) == NULL) {
- size_t nbufsiz = bufsiz + BUFSIZ;
- char *nbuf = realloc(buf, nbufsiz);
-
- if (nbuf == NULL) {
- int oerrno = errno;
- free(buf);
- errno = oerrno;
- buf = NULL;
- return NULL;
- } else
- buf = nbuf;
-
- if (fgets(&buf[bufsiz], BUFSIZ, fp) == NULL) {
- buf[bufsiz] = '\0';
- *len = strlen(buf);
- return buf;
- }
-
- *len = bufsiz;
- bufsiz = nbufsiz;
- }
-
- *len = (ptr - buf) + 1;
- return buf;
-}
-
-#endif
-
-#ifdef TEST
-int
-main(int argc, char *argv[])
-{
- char *p;
- size_t len;
-
- while ((p = fgetln(stdin, &len)) != NULL) {
- (void)printf("%zu %s", len, p);
- free(p);
- }
- return 0;
-}
-#endif
diff --git a/src/filecomplete.c b/src/filecomplete.c
index 49f8005..c3a9675 100644
--- a/src/filecomplete.c
+++ b/src/filecomplete.c
@@ -1,4 +1,4 @@
-/* $NetBSD: filecomplete.c,v 1.31 2011/09/16 16:13:16 plunky Exp $ */
+/* $NetBSD: filecomplete.c,v 1.51 2018/05/04 20:38:26 christos Exp $ */
/*-
* Copyright (c) 1997 The NetBSD Foundation, Inc.
@@ -32,31 +32,25 @@
#include "config.h"
#if !defined(lint) && !defined(SCCSID)
-__RCSID("$NetBSD: filecomplete.c,v 1.31 2011/09/16 16:13:16 plunky Exp $");
+__RCSID("$NetBSD: filecomplete.c,v 1.51 2018/05/04 20:38:26 christos Exp $");
#endif /* not lint && not SCCSID */
#include <sys/types.h>
#include <sys/stat.h>
-#include <stdio.h>
#include <dirent.h>
-#include <string.h>
-#include <pwd.h>
-#include <ctype.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <limits.h>
#include <errno.h>
#include <fcntl.h>
-#include <vis.h>
+#include <limits.h>
+#include <pwd.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
#include "el.h"
-#include "fcns.h" /* for EL_NUM_FCNS */
-#include "histedit.h"
#include "filecomplete.h"
-static const Char break_chars[] = { ' ', '\t', '\n', '"', '\\', '\'', '`', '@',
- '$', '>', '<', '=', ';', '|', '&', '{', '(', '\0' };
-
+static const wchar_t break_chars[] = L" \t\n\"\\'`@$><=;|&{(";
/********************************/
/* completion functions */
@@ -66,7 +60,7 @@
* if ``user'' isn't valid user name or ``txt'' doesn't start
* w/ '~', returns pointer to strdup()ed copy of ``txt''
*
- * it's callers's responsibility to free() returned string
+ * it's the caller's responsibility to free() the returned string
*/
char *
fn_tilde_expand(const char *txt)
@@ -98,9 +92,9 @@
}
if (temp[0] == 0) {
#ifdef HAVE_GETPW_R_POSIX
- if (getpwuid_r(getuid(), &pwres, pwbuf, sizeof(pwbuf),
+ if (getpwuid_r(getuid(), &pwres, pwbuf, sizeof(pwbuf),
&pass) != 0)
- pass = NULL;
+ pass = NULL;
#elif HAVE_GETPW_R_DRAFT
pass = getpwuid_r(getuid(), &pwres, pwbuf, sizeof(pwbuf));
#else
@@ -133,13 +127,143 @@
return temp;
}
+static int
+needs_escaping(char c)
+{
+ switch (c) {
+ case '\'':
+ case '"':
+ case '(':
+ case ')':
+ case '\\':
+ case '<':
+ case '>':
+ case '$':
+ case '#':
+ case ' ':
+ case '\n':
+ case '\t':
+ case '?':
+ case ';':
+ case '`':
+ case '@':
+ case '=':
+ case '|':
+ case '{':
+ case '}':
+ case '&':
+ case '*':
+ case '[':
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+static char *
+escape_filename(EditLine * el, const char *filename)
+{
+ size_t original_len = 0;
+ size_t escaped_character_count = 0;
+ size_t offset = 0;
+ size_t newlen;
+ const char *s;
+ char c;
+ size_t s_quoted = 0; /* does the input contain a single quote */
+ size_t d_quoted = 0; /* does the input contain a double quote */
+ char *escaped_str;
+ wchar_t *temp = el->el_line.buffer;
+
+ while (temp != el->el_line.cursor) {
+ /*
+ * If we see a single quote but have not seen a double quote so far
+ * set/unset s_quote
+ */
+ if (temp[0] == '\'' && !d_quoted)
+ s_quoted = !s_quoted;
+ /*
+ * vice versa to the above condition
+ */
+ else if (temp[0] == '"' && !s_quoted)
+ d_quoted = !d_quoted;
+ temp++;
+ }
+
+ /* Count number of special characters so that we can calculate
+ * number of extra bytes needed in the new string
+ */
+ for (s = filename; *s; s++, original_len++) {
+ c = *s;
+ /* Inside a single quote only single quotes need escaping */
+ if (s_quoted && c == '\'') {
+ escaped_character_count += 3;
+ continue;
+ }
+ /* Inside double quotes only ", \, ` and $ need escaping */
+ if (d_quoted && (c == '"' || c == '\\' || c == '`' || c == '$')) {
+ escaped_character_count++;
+ continue;
+ }
+ if (!s_quoted && !d_quoted && needs_escaping(c))
+ escaped_character_count++;
+ }
+
+ newlen = original_len + escaped_character_count + 1;
+ if ((escaped_str = el_malloc(newlen)) == NULL)
+ return NULL;
+
+ for (s = filename; *s; s++) {
+ c = *s;
+ if (!needs_escaping(c)) {
+ /* no escaping is required continue as usual */
+ escaped_str[offset++] = c;
+ continue;
+ }
+
+ /* single quotes inside single quotes require special handling */
+ if (c == '\'' && s_quoted) {
+ escaped_str[offset++] = '\'';
+ escaped_str[offset++] = '\\';
+ escaped_str[offset++] = '\'';
+ escaped_str[offset++] = '\'';
+ continue;
+ }
+
+ /* Otherwise no escaping needed inside single quotes */
+ if (s_quoted) {
+ escaped_str[offset++] = c;
+ continue;
+ }
+
+ /* No escaping needed inside a double quoted string either
+ * unless we see a '$', '\', '`', or '"' (itself)
+ */
+ if (d_quoted && c != '"' && c != '$' && c != '\\' && c != '`') {
+ escaped_str[offset++] = c;
+ continue;
+ }
+
+ /* If we reach here that means escaping is actually needed */
+ escaped_str[offset++] = '\\';
+ escaped_str[offset++] = c;
+ }
+
+ /* close the quotes */
+ if (s_quoted)
+ escaped_str[offset++] = '\'';
+ else if (d_quoted)
+ escaped_str[offset++] = '"';
+
+ escaped_str[offset] = 0;
+ return escaped_str;
+}
/*
* return first found file name starting by the ``text'' or NULL if no
* such file can be found
* value of ``state'' is ignored
*
- * it's caller's responsibility to free returned string
+ * it's the caller's responsibility to free the returned string
*/
char *
fn_filename_completion_function(const char *text, int state)
@@ -355,10 +479,13 @@
* num, so the strings are matches[1] *through* matches[num-1].
*/
void
-fn_display_match_list (EditLine *el, char **matches, size_t num, size_t width)
+fn_display_match_list(EditLine * el, char **matches, size_t num, size_t width,
+ const char *(*app_func) (const char *))
{
size_t line, lines, col, cols, thisguy;
int screenwidth = el->el_terminal.t_size.h;
+ if (app_func == NULL)
+ app_func = append_char_function;
/* Ignore matches[0]. Avoid 1-based array logic below. */
matches++;
@@ -386,13 +513,60 @@
thisguy = line + col * lines;
if (thisguy >= num)
break;
- (void)fprintf(el->el_outfile, "%s%-*s",
- col == 0 ? "" : " ", (int)width, matches[thisguy]);
+ (void)fprintf(el->el_outfile, "%s%s%s",
+ col == 0 ? "" : " ", matches[thisguy],
+ append_char_function(matches[thisguy]));
+ (void)fprintf(el->el_outfile, "%-*s",
+ (int) (width - strlen(matches[thisguy])), "");
}
(void)fprintf(el->el_outfile, "\n");
}
}
+static wchar_t *
+find_word_to_complete(const wchar_t * cursor, const wchar_t * buffer,
+ const wchar_t * word_break, const wchar_t * special_prefixes, size_t * length)
+{
+ /* We now look backwards for the start of a filename/variable word */
+ const wchar_t *ctemp = cursor;
+ int cursor_at_quote;
+ size_t len;
+ wchar_t *temp;
+
+ /* if the cursor is placed at a slash or a quote, we need to find the
+ * word before it
+ */
+ if (ctemp > buffer) {
+ switch (ctemp[-1]) {
+ case '\\':
+ case '\'':
+ case '"':
+ cursor_at_quote = 1;
+ ctemp--;
+ break;
+ default:
+ cursor_at_quote = 0;
+ }
+ } else
+ cursor_at_quote = 0;
+
+ while (ctemp > buffer
+ && !wcschr(word_break, ctemp[-1])
+ && (!special_prefixes || !wcschr(special_prefixes, ctemp[-1])))
+ ctemp--;
+
+ len = (size_t) (cursor - ctemp - cursor_at_quote);
+ temp = el_malloc((len + 1) * sizeof(*temp));
+ if (temp == NULL)
+ return NULL;
+ (void) wcsncpy(temp, ctemp, len);
+ temp[len] = '\0';
+ if (cursor_at_quote)
+ len++;
+ *length = len;
+ return temp;
+}
+
/*
* Complete the word at or before point,
* 'what_to_do' says what to do with the completion.
@@ -409,14 +583,13 @@
fn_complete(EditLine *el,
char *(*complet_func)(const char *, int),
char **(*attempted_completion_function)(const char *, int, int),
- const Char *word_break, const Char *special_prefixes,
+ const wchar_t *word_break, const wchar_t *special_prefixes,
const char *(*app_func)(const char *), size_t query_items,
int *completion_type, int *over, int *point, int *end)
{
- const TYPE(LineInfo) *li;
- Char *temp;
- char **matches;
- const Char *ctemp;
+ const LineInfoW *li;
+ wchar_t *temp;
+ char **matches;
size_t len;
int what_to_do = '\t';
int retval = CC_NORM;
@@ -433,22 +606,15 @@
if (!app_func)
app_func = append_char_function;
- /* We now look backwards for the start of a filename/variable word */
- li = FUN(el,line)(el);
- ctemp = li->cursor;
- while (ctemp > li->buffer
- && !Strchr(word_break, ctemp[-1])
- && (!special_prefixes || !Strchr(special_prefixes, ctemp[-1]) ) )
- ctemp--;
-
- len = (size_t)(li->cursor - ctemp);
- temp = el_malloc((len + 1) * sizeof(*temp));
- (void)Strncpy(temp, ctemp, len);
- temp[len] = '\0';
+ li = el_wline(el);
+ temp = find_word_to_complete(li->cursor,
+ li->buffer, word_break, special_prefixes, &len);
+ if (temp == NULL)
+ goto out;
/* these can be used by function called in completion_matches() */
/* or (*attempted_completion_function)() */
- if (point != 0)
+ if (point != NULL)
*point = (int)(li->cursor - li->buffer);
if (end != NULL)
*end = (int)(li->lastchar - li->buffer);
@@ -459,8 +625,8 @@
ct_encode_string(temp, &el->el_scratch),
cur_off - (int)len, cur_off);
} else
- matches = 0;
- if (!attempted_completion_function ||
+ matches = NULL;
+ if (!attempted_completion_function ||
(over != NULL && !*over && !matches))
matches = completion_matches(
ct_encode_string(temp, &el->el_scratch), complet_func);
@@ -471,32 +637,40 @@
if (matches) {
int i;
size_t matches_num, maxlen, match_len, match_display=1;
+ int single_match = matches[2] == NULL &&
+ (matches[1] == NULL || strcmp(matches[0], matches[1]) == 0);
retval = CC_REFRESH;
- /*
- * Only replace the completed string with common part of
- * possible matches if there is possible completion.
- */
+
if (matches[0][0] != '\0') {
el_deletestr(el, (int) len);
- FUN(el,insertstr)(el,
- ct_decode_string(matches[0], &el->el_scratch));
+ if (single_match) {
+ /*
+ * We found exact match. Add a space after
+ * it, unless we do filename completion and the
+ * object is a directory. Also do necessary escape quoting
+ */
+ char *escaped_completion = escape_filename(el, matches[0]);
+ if (escaped_completion == NULL)
+ goto out;
+ el_winsertstr(el,
+ ct_decode_string(escaped_completion, &el->el_scratch));
+ el_winsertstr(el,
+ ct_decode_string((*app_func)(escaped_completion),
+ &el->el_scratch));
+ free(escaped_completion);
+ } else {
+ /*
+ * Only replace the completed string with common part of
+ * possible matches if there is possible completion.
+ */
+ el_winsertstr(el,
+ ct_decode_string(matches[0], &el->el_scratch));
+ }
}
- if (what_to_do == '?')
- goto display_matches;
- if (matches[2] == NULL && strcmp(matches[0], matches[1]) == 0) {
- /*
- * We found exact match. Add a space after
- * it, unless we do filename completion and the
- * object is a directory.
- */
- FUN(el,insertstr)(el,
- ct_decode_string((*app_func)(matches[0]),
- &el->el_scratch));
- } else if (what_to_do == '!') {
- display_matches:
+ if (!single_match && (what_to_do == '!' || what_to_do == '?')) {
/*
* More than one match and requested to list possible
* matches.
@@ -509,7 +683,7 @@
}
/* matches[1] through matches[i-1] are available */
matches_num = (size_t)(i - 1);
-
+
/* newline to get on next line from command line */
(void)fprintf(el->el_outfile, "\n");
@@ -536,7 +710,7 @@
* add 1 to matches_num for the call.
*/
fn_display_match_list(el, matches,
- matches_num+1, maxlen);
+ matches_num+1, maxlen, app_func);
}
retval = CC_REDISPLAY;
} else if (matches[0][0]) {
@@ -559,6 +733,8 @@
el_free(matches);
matches = NULL;
}
+
+out:
el_free(temp);
return retval;
}
diff --git a/src/filecomplete.h b/src/filecomplete.h
index 971e6e0..61d8138 100644
--- a/src/filecomplete.h
+++ b/src/filecomplete.h
@@ -1,4 +1,4 @@
-/* $NetBSD: filecomplete.h,v 1.9 2009/12/30 22:37:40 christos Exp $ */
+/* $NetBSD: filecomplete.h,v 1.11 2017/04/21 05:38:03 abhinav Exp $ */
/*-
* Copyright (c) 1997 The NetBSD Foundation, Inc.
@@ -34,10 +34,11 @@
int fn_complete(EditLine *,
char *(*)(const char *, int),
char **(*)(const char *, int, int),
- const Char *, const Char *, const char *(*)(const char *), size_t,
+ const wchar_t *, const wchar_t *, const char *(*)(const char *), size_t,
int *, int *, int *, int *);
-void fn_display_match_list(EditLine *, char **, size_t, size_t);
+void fn_display_match_list(EditLine *, char **, size_t, size_t,
+ const char *(*)(const char *));
char *fn_tilde_expand(const char *);
char *fn_filename_completion_function(const char *, int);
diff --git a/src/hist.c b/src/hist.c
index 77dbaab..3c9db7d 100644
--- a/src/hist.c
+++ b/src/hist.c
@@ -1,4 +1,4 @@
-/* $NetBSD: hist.c,v 1.20 2011/07/29 15:16:33 christos Exp $ */
+/* $NetBSD: hist.c,v 1.32 2017/03/05 19:23:58 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -37,7 +37,7 @@
#if 0
static char sccsid[] = "@(#)hist.c 8.1 (Berkeley) 6/4/93";
#else
-__RCSID("$NetBSD: hist.c,v 1.20 2011/07/29 15:16:33 christos Exp $");
+__RCSID("$NetBSD: hist.c,v 1.32 2017/03/05 19:23:58 christos Exp $");
#endif
#endif /* not lint && not SCCSID */
@@ -45,12 +45,15 @@
* hist.c: History access functions
*/
#include <stdlib.h>
+#include <string.h>
+#include <vis.h>
+
#include "el.h"
/* hist_init():
* Initialization function.
*/
-protected int
+libedit_private int
hist_init(EditLine *el)
{
@@ -68,7 +71,7 @@
/* hist_end():
* clean up history;
*/
-protected void
+libedit_private void
hist_end(EditLine *el)
{
@@ -80,7 +83,7 @@
/* hist_set():
* Set new history interface
*/
-protected int
+libedit_private int
hist_set(EditLine *el, hist_fun_t fun, void *ptr)
{
@@ -94,14 +97,15 @@
* Get a history line and update it in the buffer.
* eventno tells us the event to get.
*/
-protected el_action_t
+libedit_private el_action_t
hist_get(EditLine *el)
{
- const Char *hp;
+ const wchar_t *hp;
int h;
+ size_t blen, hlen;
if (el->el_history.eventno == 0) { /* if really the current line */
- (void) Strncpy(el->el_line.buffer, el->el_history.buf,
+ (void) wcsncpy(el->el_line.buffer, el->el_history.buf,
el->el_history.sz);
el->el_line.lastchar = el->el_line.buffer +
(el->el_history.last - el->el_history.buf);
@@ -124,14 +128,16 @@
return CC_ERROR;
for (h = 1; h < el->el_history.eventno; h++)
- if ((hp = HIST_NEXT(el)) == NULL) {
- el->el_history.eventno = h;
- return CC_ERROR;
- }
- (void) Strncpy(el->el_line.buffer, hp,
- (size_t)(el->el_line.limit - el->el_line.buffer));
- el->el_line.buffer[el->el_line.limit - el->el_line.buffer - 1] = '\0';
- el->el_line.lastchar = el->el_line.buffer + Strlen(el->el_line.buffer);
+ if ((hp = HIST_NEXT(el)) == NULL)
+ goto out;
+
+ hlen = wcslen(hp) + 1;
+ blen = (size_t)(el->el_line.limit - el->el_line.buffer);
+ if (hlen > blen && !ch_enlargebufs(el, hlen))
+ goto out;
+
+ memcpy(el->el_line.buffer, hp, hlen * sizeof(*hp));
+ el->el_line.lastchar = el->el_line.buffer + hlen - 1;
if (el->el_line.lastchar > el->el_line.buffer
&& el->el_line.lastchar[-1] == '\n')
@@ -147,41 +153,66 @@
el->el_line.cursor = el->el_line.lastchar;
return CC_REFRESH;
+out:
+ el->el_history.eventno = h;
+ return CC_ERROR;
+
}
/* hist_command()
* process a history command
*/
-protected int
-hist_command(EditLine *el, int argc, const Char **argv)
+libedit_private int
+hist_command(EditLine *el, int argc, const wchar_t **argv)
{
- const Char *str;
+ const wchar_t *str;
int num;
- TYPE(HistEvent) ev;
+ HistEventW ev;
if (el->el_history.ref == NULL)
return -1;
- if (argc == 1 || Strcmp(argv[1], STR("list")) == 0) {
+ if (argc == 1 || wcscmp(argv[1], L"list") == 0) {
+ size_t maxlen = 0;
+ char *buf = NULL;
+ int hno = 1;
/* List history entries */
- for (str = HIST_LAST(el); str != NULL; str = HIST_PREV(el))
- (void) fprintf(el->el_outfile, "%d %s",
- el->el_history.ev.num, ct_encode_string(str, &el->el_scratch));
+ for (str = HIST_LAST(el); str != NULL; str = HIST_PREV(el)) {
+ char *ptr =
+ ct_encode_string(str, &el->el_scratch);
+ size_t len = strlen(ptr);
+ if (len > 0 && ptr[len - 1] == '\n')
+ ptr[--len] = '\0';
+ len = len * 4 + 1;
+ if (len >= maxlen) {
+ maxlen = len + 1024;
+ char *nbuf = el_realloc(buf, maxlen);
+ if (nbuf == NULL) {
+ el_free(buf);
+ return -1;
+ }
+ buf = nbuf;
+ }
+ strvis(buf, ptr, VIS_NL);
+ (void) fprintf(el->el_outfile, "%d\t%s\n",
+ hno++, buf);
+ }
+ el_free(buf);
return 0;
}
if (argc != 3)
return -1;
- num = (int)Strtol(argv[2], NULL, 0);
+ num = (int)wcstol(argv[2], NULL, 0);
- if (Strcmp(argv[1], STR("size")) == 0)
- return FUNW(history)(el->el_history.ref, &ev, H_SETSIZE, num);
+ if (wcscmp(argv[1], L"size") == 0)
+ return history_w(el->el_history.ref, &ev, H_SETSIZE, num);
- if (Strcmp(argv[1], STR("unique")) == 0)
- return FUNW(history)(el->el_history.ref, &ev, H_SETUNIQUE, num);
+ if (wcscmp(argv[1], L"unique") == 0)
+ return history_w(el->el_history.ref, &ev, H_SETUNIQUE, num);
return -1;
}
@@ -190,11 +221,11 @@
* Enlarge history buffer to specified value. Called from el_enlargebufs().
* Return 0 for failure, 1 for success.
*/
-protected int
+libedit_private int
/*ARGSUSED*/
hist_enlargebuf(EditLine *el, size_t oldsz, size_t newsz)
{
- Char *newbuf;
+ wchar_t *newbuf;
newbuf = el_realloc(el->el_history.buf, newsz * sizeof(*newbuf));
if (!newbuf)
@@ -210,8 +241,7 @@
return 1;
}
-#ifdef WIDECHAR
-protected wchar_t *
+libedit_private wchar_t *
hist_convert(EditLine *el, int fn, void *arg)
{
HistEventW ev;
@@ -220,4 +250,3 @@
return ct_decode_string((const char *)(const void *)ev.str,
&el->el_scratch);
}
-#endif
diff --git a/src/hist.h b/src/hist.h
index a63be49..8f5ab08 100644
--- a/src/hist.h
+++ b/src/hist.h
@@ -1,4 +1,4 @@
-/* $NetBSD: hist.h,v 1.13 2011/07/28 20:50:55 christos Exp $ */
+/* $NetBSD: hist.h,v 1.23 2017/09/01 10:19:10 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -40,48 +40,41 @@
#ifndef _h_el_hist
#define _h_el_hist
-#include "histedit.h"
-
-typedef int (*hist_fun_t)(void *, TYPE(HistEvent) *, int, ...);
+typedef int (*hist_fun_t)(void *, HistEventW *, int, ...);
typedef struct el_history_t {
- Char *buf; /* The history buffer */
- size_t sz; /* Size of history buffer */
- Char *last; /* The last character */
+ wchar_t *buf; /* The history buffer */
+ size_t sz; /* Size of history buffer */
+ wchar_t *last; /* The last character */
int eventno; /* Event we are looking for */
- void * ref; /* Argument for history fcns */
+ void *ref; /* Argument for history fcns */
hist_fun_t fun; /* Event access */
- TYPE(HistEvent) ev; /* Event cookie */
+ HistEventW ev; /* Event cookie */
} el_history_t;
#define HIST_FUN_INTERNAL(el, fn, arg) \
((((*(el)->el_history.fun) ((el)->el_history.ref, &(el)->el_history.ev, \
fn, arg)) == -1) ? NULL : (el)->el_history.ev.str)
-#ifdef WIDECHAR
#define HIST_FUN(el, fn, arg) \
(((el)->el_flags & NARROW_HISTORY) ? hist_convert(el, fn, arg) : \
HIST_FUN_INTERNAL(el, fn, arg))
-#else
-#define HIST_FUN(el, fn, arg) HIST_FUN_INTERNAL(el, fn, arg)
-#endif
+#define HIST_NEXT(el) HIST_FUN(el, H_NEXT, NULL)
+#define HIST_FIRST(el) HIST_FUN(el, H_FIRST, NULL)
+#define HIST_LAST(el) HIST_FUN(el, H_LAST, NULL)
+#define HIST_PREV(el) HIST_FUN(el, H_PREV, NULL)
+#define HIST_SET(el, num) HIST_FUN(el, H_SET, num)
+#define HIST_LOAD(el, fname) HIST_FUN(el, H_LOAD fname)
+#define HIST_SAVE(el, fname) HIST_FUN(el, H_SAVE fname)
+#define HIST_SAVE_FP(el, fp) HIST_FUN(el, H_SAVE_FP, fp)
+#define HIST_NSAVE_FP(el, n, fp) HIST_FUN(el, H_NSAVE_FP, n, fp)
-#define HIST_NEXT(el) HIST_FUN(el, H_NEXT, NULL)
-#define HIST_FIRST(el) HIST_FUN(el, H_FIRST, NULL)
-#define HIST_LAST(el) HIST_FUN(el, H_LAST, NULL)
-#define HIST_PREV(el) HIST_FUN(el, H_PREV, NULL)
-#define HIST_SET(el, num) HIST_FUN(el, H_SET, num)
-#define HIST_LOAD(el, fname) HIST_FUN(el, H_LOAD fname)
-#define HIST_SAVE(el, fname) HIST_FUN(el, H_SAVE fname)
-
-protected int hist_init(EditLine *);
-protected void hist_end(EditLine *);
-protected el_action_t hist_get(EditLine *);
-protected int hist_set(EditLine *, hist_fun_t, void *);
-protected int hist_command(EditLine *, int, const Char **);
-protected int hist_enlargebuf(EditLine *, size_t, size_t);
-#ifdef WIDECHAR
-protected wchar_t *hist_convert(EditLine *, int, void *);
-#endif
+libedit_private int hist_init(EditLine *);
+libedit_private void hist_end(EditLine *);
+libedit_private el_action_t hist_get(EditLine *);
+libedit_private int hist_set(EditLine *, hist_fun_t, void *);
+libedit_private int hist_command(EditLine *, int, const wchar_t **);
+libedit_private int hist_enlargebuf(EditLine *, size_t, size_t);
+libedit_private wchar_t *hist_convert(EditLine *, int, void *);
#endif /* _h_el_hist */
diff --git a/src/histedit.h b/src/histedit.h
index 73e8375..5b5bad1 100644
--- a/src/histedit.h
+++ b/src/histedit.h
@@ -1,4 +1,4 @@
-/* $NetBSD: histedit.h,v 1.51 2013/07/12 17:48:29 christos Exp $ */
+/* $NetBSD: histedit.h,v 1.57 2017/09/01 10:19:10 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -128,7 +128,7 @@
* For operations that support set or set/get, the argument types listed are for
* the "set" operation. For "get", each listed type must be a pointer.
* E.g. EL_EDITMODE takes an int when set, but an int* when get.
- *
+ *
* Operations that only support "get" have the correct argument types listed.
*/
#define EL_PROMPT 0 /* , prompt_func); set/get */
@@ -141,7 +141,7 @@
#define EL_ECHOTC 7 /* , const Char *, ..., NULL); set */
#define EL_SETTY 8 /* , const Char *, ..., NULL); set */
#define EL_ADDFN 9 /* , const Char *, const Char, set */
- /* el_func_t); */
+ /* el_func_t); */
#define EL_HIST 10 /* , hist_fun_t, const void *); set */
#define EL_EDITMODE 11 /* , int); set/get */
#define EL_RPROMPT 12 /* , prompt_func); set/get */
@@ -156,6 +156,7 @@
#define EL_PROMPT_ESC 21 /* , prompt_func, Char); set/get */
#define EL_RPROMPT_ESC 22 /* , prompt_func, Char); set/get */
#define EL_RESIZE 23 /* , el_zfunc_t, void *); set */
+#define EL_ALIAS_TEXT 24 /* , el_afunc_t, void *); set */
#define EL_BUILTIN_GETCFN (NULL)
@@ -224,6 +225,8 @@
#define H_NEXT_EVDATA 23 /* , const int, histdata_t *); */
#define H_DELDATA 24 /* , int, histdata_t *);*/
#define H_REPLACE 25 /* , const char *, histdata_t); */
+#define H_SAVE_FP 26 /* , FILE *); */
+#define H_NSAVE_FP 27 /* , size_t, FILE *); */
@@ -247,21 +250,10 @@
/*
* Begin Wide Character Support
*/
-#ifdef __linux__
-/* Apparently we need _GNU_SOURCE defined to get access to wcsdup on Linux */
-#ifndef _GNU_SOURCE
-#define _GNU_SOURCE
-#endif
-#endif
-
#include <wchar.h>
#include <wctype.h>
/*
- * Wide character versions
- */
-
-/*
* ==== Editing ====
*/
typedef struct lineinfow {
@@ -270,6 +262,8 @@
const wchar_t *lastchar;
} LineInfoW;
+typedef int (*el_rfunc_t)(EditLine *, wchar_t *);
+
const wchar_t *el_wgets(EditLine *, int *);
int el_wgetc(EditLine *, wchar_t *);
void el_wpush(EditLine *, const wchar_t *);
diff --git a/src/history.c b/src/history.c
index c65d4ee..7f7a94c 100644
--- a/src/history.c
+++ b/src/history.c
@@ -1,4 +1,4 @@
-/* $NetBSD: history.c,v 1.46 2011/11/18 20:39:18 christos Exp $ */
+/* $NetBSD: history.c,v 1.62 2018/09/13 09:03:40 kre Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -40,24 +40,60 @@
#if 0
static char sccsid[] = "@(#)history.c 8.1 (Berkeley) 6/4/93";
#else
-__RCSID("$NetBSD: history.c,v 1.46 2011/11/18 20:39:18 christos Exp $");
+__RCSID("$NetBSD: history.c,v 1.62 2018/09/13 09:03:40 kre Exp $");
#endif
#endif /* not lint && not SCCSID */
/*
* hist.c: TYPE(History) access functions
*/
-#include <string.h>
-#include <stdlib.h>
-#include <stdarg.h>
-#include <vis.h>
#include <sys/stat.h>
+#include <stdarg.h>
+#include <stdlib.h>
+#include <string.h>
+#include <vis.h>
static const char hist_cookie[] = "_HiStOrY_V2_\n";
#include "histedit.h"
+
+
+#ifdef NARROWCHAR
+
+#define Char char
+#define FUN(prefix, rest) prefix ## _ ## rest
+#define FUNW(type) type
+#define TYPE(type) type
+#define STR(x) x
+
+#define Strlen(s) strlen(s)
+#define Strdup(s) strdup(s)
+#define Strcmp(d, s) strcmp(d, s)
+#define Strncmp(d, s, n) strncmp(d, s, n)
+#define Strncpy(d, s, n) strncpy(d, s, n)
+#define Strncat(d, s, n) strncat(d, s, n)
+#define ct_decode_string(s, b) (s)
+#define ct_encode_string(s, b) (s)
+
+#else
#include "chartype.h"
+#define Char wchar_t
+#define FUN(prefix, rest) prefix ## _w ## rest
+#define FUNW(type) type ## _w
+#define TYPE(type) type ## W
+#define STR(x) L ## x
+
+#define Strlen(s) wcslen(s)
+#define Strdup(s) wcsdup(s)
+#define Strcmp(d, s) wcscmp(d, s)
+#define Strncmp(d, s, n) wcsncmp(d, s, n)
+#define Strncpy(d, s, n) wcsncpy(d, s, n)
+#define Strncat(d, s, n) wcsncat(d, s, n)
+
+#endif
+
+
typedef int (*history_gfun_t)(void *, TYPE(HistEvent) *);
typedef int (*history_efun_t)(void *, TYPE(HistEvent) *, const Char *);
typedef void (*history_vfun_t)(void *, TYPE(HistEvent) *);
@@ -100,18 +136,20 @@
} HistEventPrivate;
-
-private int history_setsize(TYPE(History) *, TYPE(HistEvent) *, int);
-private int history_getsize(TYPE(History) *, TYPE(HistEvent) *);
-private int history_setunique(TYPE(History) *, TYPE(HistEvent) *, int);
-private int history_getunique(TYPE(History) *, TYPE(HistEvent) *);
-private int history_set_fun(TYPE(History) *, TYPE(History) *);
-private int history_load(TYPE(History) *, const char *);
-private int history_save(TYPE(History) *, const char *);
-private int history_prev_event(TYPE(History) *, TYPE(HistEvent) *, int);
-private int history_next_event(TYPE(History) *, TYPE(HistEvent) *, int);
-private int history_next_string(TYPE(History) *, TYPE(HistEvent) *, const Char *);
-private int history_prev_string(TYPE(History) *, TYPE(HistEvent) *, const Char *);
+static int history_setsize(TYPE(History) *, TYPE(HistEvent) *, int);
+static int history_getsize(TYPE(History) *, TYPE(HistEvent) *);
+static int history_setunique(TYPE(History) *, TYPE(HistEvent) *, int);
+static int history_getunique(TYPE(History) *, TYPE(HistEvent) *);
+static int history_set_fun(TYPE(History) *, TYPE(History) *);
+static int history_load(TYPE(History) *, const char *);
+static int history_save(TYPE(History) *, const char *);
+static int history_save_fp(TYPE(History) *, size_t, FILE *);
+static int history_prev_event(TYPE(History) *, TYPE(HistEvent) *, int);
+static int history_next_event(TYPE(History) *, TYPE(HistEvent) *, int);
+static int history_next_string(TYPE(History) *, TYPE(HistEvent) *,
+ const Char *);
+static int history_prev_string(TYPE(History) *, TYPE(HistEvent) *,
+ const Char *);
/***********************************************************************/
@@ -136,23 +174,23 @@
#define H_UNIQUE 1 /* Store only unique elements */
} history_t;
-private int history_def_next(void *, TYPE(HistEvent) *);
-private int history_def_first(void *, TYPE(HistEvent) *);
-private int history_def_prev(void *, TYPE(HistEvent) *);
-private int history_def_last(void *, TYPE(HistEvent) *);
-private int history_def_curr(void *, TYPE(HistEvent) *);
-private int history_def_set(void *, TYPE(HistEvent) *, const int);
-private void history_def_clear(void *, TYPE(HistEvent) *);
-private int history_def_enter(void *, TYPE(HistEvent) *, const Char *);
-private int history_def_add(void *, TYPE(HistEvent) *, const Char *);
-private int history_def_del(void *, TYPE(HistEvent) *, const int);
+static int history_def_next(void *, TYPE(HistEvent) *);
+static int history_def_first(void *, TYPE(HistEvent) *);
+static int history_def_prev(void *, TYPE(HistEvent) *);
+static int history_def_last(void *, TYPE(HistEvent) *);
+static int history_def_curr(void *, TYPE(HistEvent) *);
+static int history_def_set(void *, TYPE(HistEvent) *, const int);
+static void history_def_clear(void *, TYPE(HistEvent) *);
+static int history_def_enter(void *, TYPE(HistEvent) *, const Char *);
+static int history_def_add(void *, TYPE(HistEvent) *, const Char *);
+static int history_def_del(void *, TYPE(HistEvent) *, const int);
-private int history_def_init(void **, TYPE(HistEvent) *, int);
-private int history_def_insert(history_t *, TYPE(HistEvent) *, const Char *);
-private void history_def_delete(history_t *, TYPE(HistEvent) *, hentry_t *);
+static int history_def_init(void **, TYPE(HistEvent) *, int);
+static int history_def_insert(history_t *, TYPE(HistEvent) *, const Char *);
+static void history_def_delete(history_t *, TYPE(HistEvent) *, hentry_t *);
-private int history_deldata_nth(history_t *, TYPE(HistEvent) *, int, void **);
-private int history_set_nth(void *, TYPE(HistEvent) *, int);
+static int history_deldata_nth(history_t *, TYPE(HistEvent) *, int, void **);
+static int history_set_nth(void *, TYPE(HistEvent) *, int);
#define history_def_setsize(p, num)(void) (((history_t *)p)->max = (num))
#define history_def_getsize(p) (((history_t *)p)->cur)
@@ -209,7 +247,7 @@
/* history_def_first():
* Default function to return the first event in the history.
*/
-private int
+static int
history_def_first(void *p, TYPE(HistEvent) *ev)
{
history_t *h = (history_t *) p;
@@ -229,7 +267,7 @@
/* history_def_last():
* Default function to return the last event in the history.
*/
-private int
+static int
history_def_last(void *p, TYPE(HistEvent) *ev)
{
history_t *h = (history_t *) p;
@@ -249,7 +287,7 @@
/* history_def_next():
* Default function to return the next event in the history.
*/
-private int
+static int
history_def_next(void *p, TYPE(HistEvent) *ev)
{
history_t *h = (history_t *) p;
@@ -274,7 +312,7 @@
/* history_def_prev():
* Default function to return the previous event in the history.
*/
-private int
+static int
history_def_prev(void *p, TYPE(HistEvent) *ev)
{
history_t *h = (history_t *) p;
@@ -300,7 +338,7 @@
/* history_def_curr():
* Default function to return the current event in the history.
*/
-private int
+static int
history_def_curr(void *p, TYPE(HistEvent) *ev)
{
history_t *h = (history_t *) p;
@@ -321,7 +359,7 @@
* Default function to set the current event in the history to the
* given one.
*/
-private int
+static int
history_def_set(void *p, TYPE(HistEvent) *ev, const int n)
{
history_t *h = (history_t *) p;
@@ -348,7 +386,7 @@
* Default function to set the current event in the history to the
* n-th one.
*/
-private int
+static int
history_set_nth(void *p, TYPE(HistEvent) *ev, int n)
{
history_t *h = (history_t *) p;
@@ -372,7 +410,7 @@
/* history_def_add():
* Append string to element
*/
-private int
+static int
history_def_add(void *p, TYPE(HistEvent) *ev, const Char *str)
{
history_t *h = (history_t *) p;
@@ -398,7 +436,7 @@
}
-private int
+static int
history_deldata_nth(history_t *h, TYPE(HistEvent) *ev,
int num, void **data)
{
@@ -420,7 +458,7 @@
* Delete element hp of the h list
*/
/* ARGSUSED */
-private int
+static int
history_def_del(void *p, TYPE(HistEvent) *ev __attribute__((__unused__)),
const int num)
{
@@ -438,8 +476,8 @@
* Delete element hp of the h list
*/
/* ARGSUSED */
-private void
-history_def_delete(history_t *h,
+static void
+history_def_delete(history_t *h,
TYPE(HistEvent) *ev __attribute__((__unused__)), hentry_t *hp)
{
HistEventPrivate *evp = (void *)&hp->ev;
@@ -461,7 +499,7 @@
/* history_def_insert():
* Insert element with string str in the h list
*/
-private int
+static int
history_def_insert(history_t *h, TYPE(HistEvent) *ev, const Char *str)
{
hentry_t *c;
@@ -493,7 +531,7 @@
/* history_def_enter():
* Default function to enter an item in the history
*/
-private int
+static int
history_def_enter(void *p, TYPE(HistEvent) *ev, const Char *str)
{
history_t *h = (history_t *) p;
@@ -520,7 +558,7 @@
* Default history initialization function
*/
/* ARGSUSED */
-private int
+static int
history_def_init(void **p, TYPE(HistEvent) *ev __attribute__((__unused__)), int n)
{
history_t *h = (history_t *) h_malloc(sizeof(*h));
@@ -545,7 +583,7 @@
/* history_def_clear():
* Default history cleanup function
*/
-private void
+static void
history_def_clear(void *p, TYPE(HistEvent) *ev)
{
history_t *h = (history_t *) p;
@@ -565,7 +603,7 @@
/* history_init():
* Initialization function.
*/
-public TYPE(History) *
+TYPE(History) *
FUN(history,init)(void)
{
TYPE(HistEvent) ev;
@@ -596,7 +634,7 @@
/* history_end():
* clean up history;
*/
-public void
+void
FUN(history,end)(TYPE(History) *h)
{
TYPE(HistEvent) ev;
@@ -612,7 +650,7 @@
/* history_setsize():
* Set history number of events
*/
-private int
+static int
history_setsize(TYPE(History) *h, TYPE(HistEvent) *ev, int num)
{
@@ -632,7 +670,7 @@
/* history_getsize():
* Get number of events currently in history
*/
-private int
+static int
history_getsize(TYPE(History) *h, TYPE(HistEvent) *ev)
{
if (h->h_next != history_def_next) {
@@ -651,7 +689,7 @@
/* history_setunique():
* Set if adjacent equal events should not be entered in history.
*/
-private int
+static int
history_setunique(TYPE(History) *h, TYPE(HistEvent) *ev, int uni)
{
@@ -667,7 +705,7 @@
/* history_getunique():
* Get if adjacent equal events should not be entered in history.
*/
-private int
+static int
history_getunique(TYPE(History) *h, TYPE(HistEvent) *ev)
{
if (h->h_next != history_def_next) {
@@ -682,7 +720,7 @@
/* history_set_fun():
* Set history functions
*/
-private int
+static int
history_set_fun(TYPE(History) *h, TYPE(History) *nh)
{
TYPE(HistEvent) ev;
@@ -729,42 +767,42 @@
/* history_load():
* TYPE(History) load function
*/
-private int
+static int
history_load(TYPE(History) *h, const char *fname)
{
FILE *fp;
char *line;
- size_t sz, max_size;
+ size_t llen;
+ ssize_t sz;
+ size_t max_size;
char *ptr;
int i = -1;
TYPE(HistEvent) ev;
-#ifdef WIDECHAR
+ Char *decode_result;
+#ifndef NARROWCHAR
static ct_buffer_t conv;
#endif
if ((fp = fopen(fname, "r")) == NULL)
return i;
- if ((line = fgetln(fp, &sz)) == NULL)
+ line = NULL;
+ llen = 0;
+ if ((sz = getline(&line, &llen, fp)) == -1)
goto done;
- if (strncmp(line, hist_cookie, sz) != 0)
+ if (strncmp(line, hist_cookie, (size_t)sz) != 0)
goto done;
ptr = h_malloc((max_size = 1024) * sizeof(*ptr));
if (ptr == NULL)
goto done;
- for (i = 0; (line = fgetln(fp, &sz)) != NULL; i++) {
- char c = line[sz];
-
- if (sz != 0 && line[sz - 1] == '\n')
+ for (i = 0; (sz = getline(&line, &llen, fp)) != -1; i++) {
+ if (sz > 0 && line[sz - 1] == '\n')
line[--sz] = '\0';
- else
- line[sz] = '\0';
-
- if (max_size < sz) {
+ if (max_size < (size_t)sz) {
char *nptr;
- max_size = (sz + 1024) & (size_t)~1023;
+ max_size = ((size_t)sz + 1024) & (size_t)~1023;
nptr = h_realloc(ptr, max_size * sizeof(*ptr));
if (nptr == NULL) {
i = -1;
@@ -773,8 +811,10 @@
ptr = nptr;
}
(void) strunvis(ptr, line);
- line[sz] = c;
- if (HENTER(h, &ev, ct_decode_string(ptr, &conv)) == -1) {
+ decode_result = ct_decode_string(ptr, &conv);
+ if (decode_result == NULL)
+ continue;
+ if (HENTER(h, &ev, decode_result) == -1) {
i = -1;
goto oomem;
}
@@ -782,43 +822,48 @@
oomem:
h_free(ptr);
done:
+ free(line);
(void) fclose(fp);
return i;
}
-/* history_save():
+/* history_save_fp():
* TYPE(History) save function
*/
-private int
-history_save(TYPE(History) *h, const char *fname)
+static int
+history_save_fp(TYPE(History) *h, size_t nelem, FILE *fp)
{
- FILE *fp;
TYPE(HistEvent) ev;
int i = -1, retval;
size_t len, max_size;
char *ptr;
const char *str;
-#ifdef WIDECHAR
+#ifndef NARROWCHAR
static ct_buffer_t conv;
#endif
- if ((fp = fopen(fname, "w")) == NULL)
- return -1;
-
if (fchmod(fileno(fp), S_IRUSR|S_IWUSR) == -1)
goto done;
- if (fputs(hist_cookie, fp) == EOF)
+ if (ftell(fp) == 0 && fputs(hist_cookie, fp) == EOF)
goto done;
ptr = h_malloc((max_size = 1024) * sizeof(*ptr));
if (ptr == NULL)
goto done;
- for (i = 0, retval = HLAST(h, &ev);
- retval != -1;
- retval = HPREV(h, &ev), i++) {
+ if (nelem != (size_t)-1) {
+ for (retval = HFIRST(h, &ev); retval != -1 && nelem-- > 0;
+ retval = HNEXT(h, &ev))
+ continue;
+ } else
+ retval = -1;
+
+ if (retval == -1)
+ retval = HLAST(h, &ev);
+
+ for (i = 0; retval != -1; retval = HPREV(h, &ev), i++) {
str = ct_encode_string(ev.str, &conv);
- len = strlen(str) * 4;
- if (len >= max_size) {
+ len = strlen(str) * 4 + 1;
+ if (len > max_size) {
char *nptr;
max_size = (len + 1024) & (size_t)~1023;
nptr = h_realloc(ptr, max_size * sizeof(*ptr));
@@ -834,15 +879,33 @@
oomem:
h_free(ptr);
done:
- (void) fclose(fp);
return i;
}
+/* history_save():
+ * History save function
+ */
+static int
+history_save(TYPE(History) *h, const char *fname)
+{
+ FILE *fp;
+ int i;
+
+ if ((fp = fopen(fname, "w")) == NULL)
+ return -1;
+
+ i = history_save_fp(h, (size_t)-1, fp);
+
+ (void) fclose(fp);
+ return i;
+}
+
+
/* history_prev_event():
* Find the previous event, with number given
*/
-private int
+static int
history_prev_event(TYPE(History) *h, TYPE(HistEvent) *ev, int num)
{
int retval;
@@ -856,7 +919,7 @@
}
-private int
+static int
history_next_evdata(TYPE(History) *h, TYPE(HistEvent) *ev, int num, void **d)
{
int retval;
@@ -876,7 +939,7 @@
/* history_next_event():
* Find the next event, with number given
*/
-private int
+static int
history_next_event(TYPE(History) *h, TYPE(HistEvent) *ev, int num)
{
int retval;
@@ -893,7 +956,7 @@
/* history_prev_string():
* Find the previous event beginning with string
*/
-private int
+static int
history_prev_string(TYPE(History) *h, TYPE(HistEvent) *ev, const Char *str)
{
size_t len = Strlen(str);
@@ -911,7 +974,7 @@
/* history_next_string():
* Find the next event beginning with string
*/
-private int
+static int
history_next_string(TYPE(History) *h, TYPE(HistEvent) *ev, const Char *str)
{
size_t len = Strlen(str);
@@ -1019,6 +1082,21 @@
he_seterrev(ev, _HE_HIST_WRITE);
break;
+ case H_SAVE_FP:
+ retval = history_save_fp(h, (size_t)-1, va_arg(va, FILE *));
+ if (retval == -1)
+ he_seterrev(ev, _HE_HIST_WRITE);
+ break;
+
+ case H_NSAVE_FP:
+ {
+ size_t sz = va_arg(va, size_t);
+ retval = history_save_fp(h, sz, va_arg(va, FILE *));
+ if (retval == -1)
+ he_seterrev(ev, _HE_HIST_WRITE);
+ break;
+ }
+
case H_PREV_EVENT:
retval = history_prev_event(h, ev, va_arg(va, int));
break;
diff --git a/src/historyn.c b/src/historyn.c
new file mode 100644
index 0000000..59130de
--- /dev/null
+++ b/src/historyn.c
@@ -0,0 +1,3 @@
+#include "config.h"
+#define NARROWCHAR
+#include "history.c"
diff --git a/src/keymacro.c b/src/keymacro.c
index 1cab508..13d2089 100644
--- a/src/keymacro.c
+++ b/src/keymacro.c
@@ -1,4 +1,4 @@
-/* $NetBSD: keymacro.c,v 1.7 2011/08/16 16:25:15 christos Exp $ */
+/* $NetBSD: keymacro.c,v 1.23 2016/05/24 15:00:45 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -37,7 +37,7 @@
#if 0
static char sccsid[] = "@(#)key.c 8.1 (Berkeley) 6/4/93";
#else
-__RCSID("$NetBSD: keymacro.c,v 1.7 2011/08/16 16:25:15 christos Exp $");
+__RCSID("$NetBSD: keymacro.c,v 1.23 2016/05/24 15:00:45 christos Exp $");
#endif
#endif /* not lint && not SCCSID */
@@ -50,7 +50,7 @@
* number of characters. This module maintains a map (the
* el->el_keymacro.map)
* to convert these extended-key sequences into input strs
- * (XK_STR), editor functions (XK_CMD), or unix commands (XK_EXE).
+ * (XK_STR) or editor functions (XK_CMD).
*
* Warning:
* If key is a substr of some other keys, then the longer
@@ -63,36 +63,37 @@
* 1) It is not possible to have one key that is a
* substr of another.
*/
-#include <string.h>
#include <stdlib.h>
+#include <string.h>
#include "el.h"
+#include "fcns.h"
/*
* The Nodes of the el->el_keymacro.map. The el->el_keymacro.map is a
* linked list of these node elements
*/
struct keymacro_node_t {
- Char ch; /* single character of key */
+ wchar_t ch; /* single character of key */
int type; /* node type */
keymacro_value_t val; /* command code or pointer to str, */
- /* if this is a leaf */
+ /* if this is a leaf */
struct keymacro_node_t *next; /* ptr to next char of this key */
struct keymacro_node_t *sibling;/* ptr to another key with same prefix*/
};
-private int node_trav(EditLine *, keymacro_node_t *, Char *,
+static int node_trav(EditLine *, keymacro_node_t *, wchar_t *,
keymacro_value_t *);
-private int node__try(EditLine *, keymacro_node_t *, const Char *,
- keymacro_value_t *, int);
-private keymacro_node_t *node__get(Int);
-private void node__free(keymacro_node_t *);
-private void node__put(EditLine *, keymacro_node_t *);
-private int node__delete(EditLine *, keymacro_node_t **,
- const Char *);
-private int node_lookup(EditLine *, const Char *,
+static int node__try(EditLine *, keymacro_node_t *,
+ const wchar_t *, keymacro_value_t *, int);
+static keymacro_node_t *node__get(wint_t);
+static void node__free(keymacro_node_t *);
+static void node__put(EditLine *, keymacro_node_t *);
+static int node__delete(EditLine *, keymacro_node_t **,
+ const wchar_t *);
+static int node_lookup(EditLine *, const wchar_t *,
keymacro_node_t *, size_t);
-private int node_enum(EditLine *, keymacro_node_t *, size_t);
+static int node_enum(EditLine *, keymacro_node_t *, size_t);
#define KEY_BUFSIZ EL_BUFSIZ
@@ -100,7 +101,7 @@
/* keymacro_init():
* Initialize the key maps
*/
-protected int
+libedit_private int
keymacro_init(EditLine *el)
{
@@ -116,7 +117,7 @@
/* keymacro_end():
* Free the key maps
*/
-protected void
+libedit_private void
keymacro_end(EditLine *el)
{
@@ -129,7 +130,7 @@
/* keymacro_map_cmd():
* Associate cmd with a key value
*/
-protected keymacro_value_t *
+libedit_private keymacro_value_t *
keymacro_map_cmd(EditLine *el, int cmd)
{
@@ -141,8 +142,8 @@
/* keymacro_map_str():
* Associate str with a key value
*/
-protected keymacro_value_t *
-keymacro_map_str(EditLine *el, Char *str)
+libedit_private keymacro_value_t *
+keymacro_map_str(EditLine *el, wchar_t *str)
{
el->el_keymacro.val.str = str;
@@ -155,7 +156,7 @@
* Then initializes el->el_keymacro.map with arrow keys
* [Always bind the ansi arrow keys?]
*/
-protected void
+libedit_private void
keymacro_reset(EditLine *el)
{
@@ -169,12 +170,13 @@
* Calls the recursive function with entry point el->el_keymacro.map
* Looks up *ch in map and then reads characters until a
* complete match is found or a mismatch occurs. Returns the
- * type of the match found (XK_STR, XK_CMD, or XK_EXE).
+ * type of the match found (XK_STR or XK_CMD).
* Returns NULL in val.str and XK_STR for no match.
+ * Returns XK_NOD for end of file or read error.
* The last character read is returned in *ch.
*/
-protected int
-keymacro_get(EditLine *el, Char *ch, keymacro_value_t *val)
+libedit_private int
+keymacro_get(EditLine *el, wchar_t *ch, keymacro_value_t *val)
{
return node_trav(el, el->el_keymacro.map, ch, val);
@@ -187,8 +189,9 @@
* code is applied to the existing key. Ntype specifies if code is a
* command, an out str or a unix command.
*/
-protected void
-keymacro_add(EditLine *el, const Char *key, keymacro_value_t *val, int ntype)
+libedit_private void
+keymacro_add(EditLine *el, const wchar_t *key, keymacro_value_t *val,
+ int ntype)
{
if (key[0] == '\0') {
@@ -215,13 +218,11 @@
/* keymacro_clear():
*
*/
-protected void
-keymacro_clear(EditLine *el, el_action_t *map, const Char *in)
+libedit_private void
+keymacro_clear(EditLine *el, el_action_t *map, const wchar_t *in)
{
-#ifdef WIDECHAR
if (*in > N_KEYS) /* can't be in the map */
return;
-#endif
if ((map[(unsigned char)*in] == ED_SEQUENCE_LEAD_IN) &&
((map == el->el_map.key &&
el->el_map.alt[(unsigned char)*in] != ED_SEQUENCE_LEAD_IN) ||
@@ -235,8 +236,8 @@
* Delete the key and all longer keys staring with key, if
* they exists.
*/
-protected int
-keymacro_delete(EditLine *el, const Char *key)
+libedit_private int
+keymacro_delete(EditLine *el, const wchar_t *key)
{
if (key[0] == '\0') {
@@ -256,8 +257,8 @@
* Print the binding associated with key key.
* Print entire el->el_keymacro.map if null
*/
-protected void
-keymacro_print(EditLine *el, const Char *key)
+libedit_private void
+keymacro_print(EditLine *el, const wchar_t *key)
{
/* do nothing if el->el_keymacro.map is empty and null key specified */
@@ -267,7 +268,7 @@
el->el_keymacro.buf[0] = '"';
if (node_lookup(el, key, el->el_keymacro.map, (size_t)1) <= -1)
/* key is not bound */
- (void) fprintf(el->el_errfile, "Unbound extended key \"" FSTR
+ (void) fprintf(el->el_errfile, "Unbound extended key \"%ls"
"\"\n", key);
return;
}
@@ -275,21 +276,19 @@
/* node_trav():
* recursively traverses node in tree until match or mismatch is
- * found. May read in more characters.
+ * found. May read in more characters.
*/
-private int
-node_trav(EditLine *el, keymacro_node_t *ptr, Char *ch, keymacro_value_t *val)
+static int
+node_trav(EditLine *el, keymacro_node_t *ptr, wchar_t *ch,
+ keymacro_value_t *val)
{
if (ptr->ch == *ch) {
/* match found */
if (ptr->next) {
/* key not complete so get next char */
- if (FUN(el,getc)(el, ch) != 1) {/* if EOF or error */
- val->cmd = ED_END_OF_FILE;
- return XK_CMD;
- /* PWP: Pretend we just read an end-of-file */
- }
+ if (el_wgetc(el, ch) != 1)
+ return XK_NOD;
return node_trav(el, ptr->next, ch, val);
} else {
*val = ptr->val;
@@ -312,10 +311,10 @@
/* node__try():
- * Find a node that matches *str or allocate a new one
+ * Find a node that matches *str or allocate a new one
*/
-private int
-node__try(EditLine *el, keymacro_node_t *ptr, const Char *str,
+static int
+node__try(EditLine *el, keymacro_node_t *ptr, const wchar_t *str,
keymacro_value_t *val, int ntype)
{
@@ -341,7 +340,6 @@
case XK_NOD:
break;
case XK_STR:
- case XK_EXE:
if (ptr->val.str)
el_free(ptr->val.str);
break;
@@ -356,8 +354,7 @@
ptr->val = *val;
break;
case XK_STR:
- case XK_EXE:
- if ((ptr->val.str = Strdup(val->str)) == NULL)
+ if ((ptr->val.str = wcsdup(val->str)) == NULL)
return -1;
break;
default:
@@ -377,8 +374,8 @@
/* node__delete():
* Delete node that matches str
*/
-private int
-node__delete(EditLine *el, keymacro_node_t **inptr, const Char *str)
+static int
+node__delete(EditLine *el, keymacro_node_t **inptr, const wchar_t *str)
{
keymacro_node_t *ptr;
keymacro_node_t *prev_ptr = NULL;
@@ -425,7 +422,7 @@
/* node__put():
* Puts a tree of nodes onto free list using free(3).
*/
-private void
+static void
node__put(EditLine *el, keymacro_node_t *ptr)
{
if (ptr == NULL)
@@ -441,7 +438,6 @@
case XK_CMD:
case XK_NOD:
break;
- case XK_EXE:
case XK_STR:
if (ptr->val.str != NULL)
el_free(ptr->val.str);
@@ -457,8 +453,8 @@
/* node__get():
* Returns pointer to a keymacro_node_t for ch.
*/
-private keymacro_node_t *
-node__get(Int ch)
+static keymacro_node_t *
+node__get(wint_t ch)
{
keymacro_node_t *ptr;
@@ -473,7 +469,7 @@
return ptr;
}
-private void
+static void
node__free(keymacro_node_t *k)
{
if (k == NULL)
@@ -487,8 +483,9 @@
* look for the str starting at node ptr.
* Print if last node
*/
-private int
-node_lookup(EditLine *el, const Char *str, keymacro_node_t *ptr, size_t cnt)
+static int
+node_lookup(EditLine *el, const wchar_t *str, keymacro_node_t *ptr,
+ size_t cnt)
{
ssize_t used;
@@ -539,7 +536,7 @@
/* node_enum():
* Traverse the node printing the characters it is bound in buffer
*/
-private int
+static int
node_enum(EditLine *el, keymacro_node_t *ptr, size_t cnt)
{
ssize_t used;
@@ -549,7 +546,7 @@
el->el_keymacro.buf[++cnt] = '\0';
(void) fprintf(el->el_errfile,
"Some extended keys too long for internal print buffer");
- (void) fprintf(el->el_errfile, " \"" FSTR "...\"\n",
+ (void) fprintf(el->el_errfile, " \"%ls...\"\n",
el->el_keymacro.buf);
return 0;
}
@@ -582,8 +579,9 @@
* Print the specified key and its associated
* function specified by val
*/
-protected void
-keymacro_kprint(EditLine *el, const Char *key, keymacro_value_t *val, int ntype)
+libedit_private void
+keymacro_kprint(EditLine *el, const wchar_t *key, keymacro_value_t *val,
+ int ntype)
{
el_bindings_t *fp;
char unparsbuf[EL_BUFSIZ];
@@ -592,9 +590,8 @@
if (val != NULL)
switch (ntype) {
case XK_STR:
- case XK_EXE:
(void) keymacro__decode_str(val->str, unparsbuf,
- sizeof(unparsbuf),
+ sizeof(unparsbuf),
ntype == XK_STR ? "\"\"" : "[]");
(void) fprintf(el->el_outfile, fmt,
ct_encode_string(key, &el->el_scratch), unparsbuf);
@@ -602,7 +599,7 @@
case XK_CMD:
for (fp = el->el_map.help; fp->name; fp++)
if (val->cmd == fp->func) {
- ct_wcstombs(unparsbuf, fp->name, sizeof(unparsbuf));
+ wcstombs(unparsbuf, fp->name, sizeof(unparsbuf));
unparsbuf[sizeof(unparsbuf) -1] = '\0';
(void) fprintf(el->el_outfile, fmt,
ct_encode_string(key, &el->el_scratch), unparsbuf);
@@ -633,11 +630,12 @@
/* keymacro__decode_str():
* Make a printable version of the ey
*/
-protected size_t
-keymacro__decode_str(const Char *str, char *buf, size_t len, const char *sep)
+libedit_private size_t
+keymacro__decode_str(const wchar_t *str, char *buf, size_t len,
+ const char *sep)
{
char *b = buf, *eb = b + len;
- const Char *p;
+ const wchar_t *p;
b = buf;
if (sep[0] != '\0') {
@@ -649,8 +647,8 @@
goto add_endsep;
}
for (p = str; *p != 0; p++) {
- Char dbuf[VISUAL_WIDTH_MAX];
- Char *p2 = dbuf;
+ wchar_t dbuf[VISUAL_WIDTH_MAX];
+ wchar_t *p2 = dbuf;
ssize_t l = ct_visual_char(dbuf, VISUAL_WIDTH_MAX, *p);
while (l-- > 0) {
ssize_t n = ct_encode_char(b, (size_t)(eb - b), *p2++);
diff --git a/src/keymacro.h b/src/keymacro.h
index 2445de5..0653bbe 100644
--- a/src/keymacro.h
+++ b/src/keymacro.h
@@ -1,4 +1,4 @@
-/* $NetBSD: keymacro.h,v 1.2 2011/07/28 03:44:36 christos Exp $ */
+/* $NetBSD: keymacro.h,v 1.6 2016/05/09 21:46:56 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -42,13 +42,13 @@
typedef union keymacro_value_t {
el_action_t cmd; /* If it is a command the # */
- Char *str; /* If it is a string... */
+ wchar_t *str; /* If it is a string... */
} keymacro_value_t;
typedef struct keymacro_node_t keymacro_node_t;
-typedef struct el_keymacromacro_t {
- Char *buf; /* Key print buffer */
+typedef struct el_keymacro_t {
+ wchar_t *buf; /* Key print buffer */
keymacro_node_t *map; /* Key map */
keymacro_value_t val; /* Local conversion buffer */
} el_keymacro_t;
@@ -56,21 +56,21 @@
#define XK_CMD 0
#define XK_STR 1
#define XK_NOD 2
-#define XK_EXE 3
-protected int keymacro_init(EditLine *);
-protected void keymacro_end(EditLine *);
-protected keymacro_value_t *keymacro_map_cmd(EditLine *, int);
-protected keymacro_value_t *keymacro_map_str(EditLine *, Char *);
-protected void keymacro_reset(EditLine *);
-protected int keymacro_get(EditLine *, Char *, keymacro_value_t *);
-protected void keymacro_add(EditLine *, const Char *, keymacro_value_t *, int);
-protected void keymacro_clear(EditLine *, el_action_t *, const Char *);
-protected int keymacro_delete(EditLine *, const Char *);
-protected void keymacro_print(EditLine *, const Char *);
-protected void keymacro_kprint(EditLine *, const Char *, keymacro_value_t *,
- int);
-protected size_t keymacro__decode_str(const Char *, char *, size_t,
+libedit_private int keymacro_init(EditLine *);
+libedit_private void keymacro_end(EditLine *);
+libedit_private keymacro_value_t *keymacro_map_cmd(EditLine *, int);
+libedit_private keymacro_value_t *keymacro_map_str(EditLine *, wchar_t *);
+libedit_private void keymacro_reset(EditLine *);
+libedit_private int keymacro_get(EditLine *, wchar_t *, keymacro_value_t *);
+libedit_private void keymacro_add(EditLine *, const wchar_t *,
+ keymacro_value_t *, int);
+libedit_private void keymacro_clear(EditLine *, el_action_t *, const wchar_t *);
+libedit_private int keymacro_delete(EditLine *, const wchar_t *);
+libedit_private void keymacro_print(EditLine *, const wchar_t *);
+libedit_private void keymacro_kprint(EditLine *, const wchar_t *,
+ keymacro_value_t *, int);
+libedit_private size_t keymacro__decode_str(const wchar_t *, char *, size_t,
const char *);
#endif /* _h_el_keymacro */
diff --git a/src/literal.c b/src/literal.c
new file mode 100644
index 0000000..5d07b1d
--- /dev/null
+++ b/src/literal.c
@@ -0,0 +1,138 @@
+/* $NetBSD: literal.c,v 1.3 2017/06/30 20:26:52 kre Exp $ */
+
+/*-
+ * Copyright (c) 2017 The NetBSD Foundation, Inc.
+ * All rights reserved.
+ *
+ * This code is derived from software contributed to The NetBSD Foundation
+ * by Christos Zoulas.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include "config.h"
+#if !defined(lint) && !defined(SCCSID)
+#if 0
+__RCSID("$NetBSD: literal.c,v 1.3 2017/06/30 20:26:52 kre Exp $");
+#endif
+#endif /* not lint && not SCCSID */
+
+/*
+ * literal.c: Literal sequences handling.
+ */
+#include <assert.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "el.h"
+
+libedit_private void
+literal_init(EditLine *el)
+{
+ el_literal_t *l = &el->el_literal;
+
+ memset(l, 0, sizeof(*l));
+}
+
+libedit_private void
+literal_end(EditLine *el)
+{
+ literal_clear(el);
+}
+
+libedit_private void
+literal_clear(EditLine *el)
+{
+ el_literal_t *l = &el->el_literal;
+ size_t i;
+
+ if (l->l_len == 0)
+ return;
+
+ for (i = 0; i < l->l_idx; i++)
+ el_free(l->l_buf[i]);
+ el_free(l->l_buf);
+ l->l_buf = NULL;
+ l->l_len = 0;
+ l->l_idx = 0;
+}
+
+libedit_private wint_t
+literal_add(EditLine *el, const wchar_t *buf, const wchar_t *end, int *wp)
+{
+ el_literal_t *l = &el->el_literal;
+ size_t i, len;
+ ssize_t w, n;
+ char *b;
+
+ w = wcwidth(end[1]); /* column width of the visible char */
+ *wp = (int)w;
+
+ if (w <= 0) /* we require something to be printed */
+ return 0;
+
+ len = (size_t)(end - buf);
+ for (w = 0, i = 0; i < len; i++)
+ w += ct_enc_width(buf[i]);
+ w += ct_enc_width(end[1]);
+
+ b = el_malloc((size_t)(w + 1));
+ if (b == NULL)
+ return 0;
+
+ for (n = 0, i = 0; i < len; i++)
+ n += ct_encode_char(b + n, w - n, buf[i]);
+ n += ct_encode_char(b + n, w - n, end[1]);
+ b[n] = '\0';
+
+ /*
+ * Then save this literal string in the list of such strings,
+ * and return a "magic character" to put into the terminal buffer.
+ * When that magic char is 'printed' the saved string (which includes
+ * the char that belongs in that position) gets sent instead.
+ */
+ if (l->l_idx == l->l_len) {
+ char **bp;
+
+ l->l_len += 4;
+ bp = el_realloc(l->l_buf, sizeof(*l->l_buf) * l->l_len);
+ if (bp == NULL) {
+ free(b);
+ l->l_len -= 4;
+ return 0;
+ }
+ l->l_buf = bp;
+ }
+ l->l_buf[l->l_idx++] = b;
+ return EL_LITERAL | (wint_t)(l->l_idx - 1);
+}
+
+libedit_private const char *
+literal_get(EditLine *el, wint_t idx)
+{
+ el_literal_t *l = &el->el_literal;
+
+ assert(idx & EL_LITERAL);
+ idx &= ~EL_LITERAL;
+ assert(l->l_idx > (size_t)idx);
+ return l->l_buf[idx];
+}
diff --git a/src/literal.h b/src/literal.h
new file mode 100644
index 0000000..a8e0a41
--- /dev/null
+++ b/src/literal.h
@@ -0,0 +1,53 @@
+/* $NetBSD: literal.h,v 1.2 2017/06/30 20:26:52 kre Exp $ */
+
+/*-
+ * Copyright (c) 2017 The NetBSD Foundation, Inc.
+ * All rights reserved.
+ *
+ * This code is derived from software contributed to The NetBSD Foundation
+ * by Christos Zoulas.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/*
+ * el.literal.h: Literal character
+ */
+#ifndef _h_el_literal
+#define _h_el_literal
+
+#define EL_LITERAL ((wint_t)0x80000000)
+
+typedef struct el_literal_t {
+ char **l_buf; /* array of buffers */
+ size_t l_idx; /* max in use */
+ size_t l_len; /* max allocated */
+} el_literal_t;
+
+libedit_private void literal_init(EditLine *);
+libedit_private void literal_end(EditLine *);
+libedit_private void literal_clear(EditLine *);
+libedit_private wint_t literal_add(EditLine *, const wchar_t *,
+ const wchar_t *, int *);
+libedit_private const char *literal_get(EditLine *, wint_t);
+
+#endif /* _h_el_literal */
diff --git a/src/makelist b/src/makelist
index 1e95bae..c8f9276 100644
--- a/src/makelist
+++ b/src/makelist
@@ -1,5 +1,5 @@
#!/bin/sh -
-# $NetBSD: makelist,v 1.18 2012/03/21 05:34:54 matt Exp $
+# $NetBSD: makelist,v 1.29 2016/05/09 21:46:56 christos Exp $
#
# Copyright (c) 1992, 1993
# The Regents of the University of California. All rights reserved.
@@ -35,7 +35,8 @@
# makelist.sh: Automatically generate header files...
-USAGE="Usage: $0 -n|-h|-e|-fc|-fh|-bc|-bh|-m <filenames>"
+AWK=awk
+USAGE="Usage: $0 -h|-fc|-fh|-bh <filenames>"
if [ "x$1" = "x" ]
then
@@ -50,17 +51,6 @@
case $FLAG in
-# generate foo.h file from foo.c
-#
--n)
- cat << _EOF
-#include "config.h"
-#undef WIDECHAR
-#define NARROWCHAR
-#include "${FILES}"
-_EOF
- ;;
-
-h)
set - `echo $FILES | sed -e 's/\\./_/g'`
hdr="_h_`basename $1`"
@@ -77,7 +67,8 @@
# XXX: need a space between name and prototype so that -fc and -fh
# parsing is much easier
#
- printf("protected el_action_t\t%s (EditLine *, Int);\n", name);
+ printf("libedit_private el_action_t\t%s (EditLine *, wint_t);\n",
+ name);
}
}
END {
@@ -85,15 +76,13 @@
}'
;;
-# generate help.c from various .c files
+# generate help.h from various .c files
#
--bc)
+-bh)
cat $FILES | $AWK '
BEGIN {
printf("/* Automatically generated file, do not edit */\n");
- printf("#include \"config.h\"\n#include \"el.h\"\n");
- printf("#include \"chartype.h\"\n");
- printf("private const struct el_bindings_t el_func_help[] = {\n");
+ printf("static const struct el_bindings_t el_func_help[] = {\n");
low = "abcdefghijklmnopqrstuvwxyz_";
high = "ABCDEFGHIJKLMNOPQRSTUVWXYZ_";
for (i = 1; i <= length(low); i++)
@@ -113,46 +102,31 @@
fname = fname s;
}
- printf(" { %-30.30s %-30.30s\n","STR(\"" fname "\"),", uname ",");
+ printf(" { %-30.30s %-30.30s\n","L\"" fname "\",", uname ",");
ok = 1;
}
}
/^ \*/ {
if (ok) {
- printf(" STR(\"");
+ printf(" L\"");
for (i = 2; i < NF; i++)
printf("%s ", $i);
- printf("%s\") },\n", $i);
+ printf("%s\" },\n", $i);
ok = 0;
}
}
END {
printf("};\n");
- printf("\nprotected const el_bindings_t* help__get(void)");
- printf("{ return el_func_help; }\n");
}'
;;
-# generate help.h from various .c files
-#
--bh)
- $AWK '
- BEGIN {
- printf("/* Automatically generated file, do not edit */\n");
- printf("#ifndef _h_help_c\n#define _h_help_c\n");
- printf("protected const el_bindings_t *help__get(void);\n");
- printf("#endif /* _h_help_c */\n");
- }' /dev/null
- ;;
-
# generate fcns.h from various .h files
#
-fh)
cat $FILES | $AWK '/el_action_t/ { print $3 }' | \
- sort | tr '[a-z]' '[A-Z]' | $AWK '
+ sort | tr '[:lower:]' '[:upper:]' | $AWK '
BEGIN {
printf("/* Automatically generated file, do not edit */\n");
- printf("#ifndef _h_fcns_c\n#define _h_fcns_c\n");
count = 0;
}
{
@@ -160,21 +134,16 @@
}
END {
printf("#define\t%-30.30s\t%3d\n", "EL_NUM_FCNS", count);
-
- printf("typedef el_action_t (*el_func_t)(EditLine *, Int);");
- printf("\nprotected const el_func_t* func__get(void);\n");
- printf("#endif /* _h_fcns_c */\n");
}'
;;
-# generate fcns.c from various .h files
+# generate func.h from various .h files
#
-fc)
cat $FILES | $AWK '/el_action_t/ { print $3 }' | sort | $AWK '
BEGIN {
printf("/* Automatically generated file, do not edit */\n");
- printf("#include \"config.h\"\n#include \"el.h\"\n");
- printf("private const el_func_t el_func[] = {");
+ printf("static const el_func_t el_func[] = {");
maxlen = 80;
needn = 1;
len = 0;
@@ -194,59 +163,6 @@
}
END {
printf("\n};\n");
- printf("\nprotected const el_func_t* func__get(void) { return el_func; }\n");
- }'
- ;;
-
-# generate editline.c from various .c files
-#
--e)
- echo "$FILES" | tr ' ' '\012' | $AWK '
- BEGIN {
- printf("/* Automatically generated file, do not edit */\n");
- printf("#define protected static\n");
- printf("#define SCCSID\n");
- }
- {
- printf("#include \"%s\"\n", $1);
- }'
- ;;
-
-# generate man page fragment from various .c files
-#
--m)
- cat $FILES | $AWK '
- BEGIN {
- printf(".\\\" Section automatically generated with makelist\n");
- printf(".Bl -tag -width 4n\n");
- }
- /\(\):/ {
- pr = substr($2, 1, 2);
- if (pr == "vi" || pr == "em" || pr == "ed") {
- name = substr($2, 1, length($2) - 3);
- fname = "";
- for (i = 1; i <= length(name); i++) {
- s = substr(name, i, 1);
- if (s == "_")
- s = "-";
- fname = fname s;
- }
-
- printf(".It Ic %s\n", fname);
- ok = 1;
- }
- }
- /^ \*/ {
- if (ok) {
- for (i = 2; i < NF; i++)
- printf("%s ", $i);
- printf("%s.\n", $i);
- ok = 0;
- }
- }
- END {
- printf(".El\n");
- printf(".\\\" End of section automatically generated with makelist\n");
}'
;;
diff --git a/src/map.c b/src/map.c
index b3e11ba..f72d272 100644
--- a/src/map.c
+++ b/src/map.c
@@ -1,4 +1,4 @@
-/* $NetBSD: map.c,v 1.33 2013/01/01 15:34:02 christos Exp $ */
+/* $NetBSD: map.c,v 1.51 2016/05/09 21:46:56 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -37,30 +37,40 @@
#if 0
static char sccsid[] = "@(#)map.c 8.1 (Berkeley) 6/4/93";
#else
-__RCSID("$NetBSD: map.c,v 1.33 2013/01/01 15:34:02 christos Exp $");
+__RCSID("$NetBSD: map.c,v 1.51 2016/05/09 21:46:56 christos Exp $");
#endif
#endif /* not lint && not SCCSID */
/*
* map.c: Editor function definitions
*/
+#include <ctype.h>
#include <stdlib.h>
-#include "el.h"
+#include <string.h>
-private void map_print_key(EditLine *, el_action_t *, const Char *);
-private void map_print_some_keys(EditLine *, el_action_t *, Int, Int);
-private void map_print_all_keys(EditLine *);
-private void map_init_nls(EditLine *);
-private void map_init_meta(EditLine *);
+#include "el.h"
+#include "common.h"
+#include "emacs.h"
+#include "vi.h"
+#include "fcns.h"
+#include "func.h"
+#include "help.h"
+#include "parse.h"
+
+static void map_print_key(EditLine *, el_action_t *, const wchar_t *);
+static void map_print_some_keys(EditLine *, el_action_t *, wint_t, wint_t);
+static void map_print_all_keys(EditLine *);
+static void map_init_nls(EditLine *);
+static void map_init_meta(EditLine *);
/* keymap tables ; should be N_KEYS*sizeof(KEYCMD) bytes long */
-private const el_action_t el_map_emacs[] = {
+static const el_action_t el_map_emacs[] = {
/* 0 */ EM_SET_MARK, /* ^@ */
/* 1 */ ED_MOVE_TO_BEG, /* ^A */
/* 2 */ ED_PREV_CHAR, /* ^B */
- /* 3 */ ED_TTY_SIGINT, /* ^C */
+ /* 3 */ ED_IGNORE, /* ^C */
/* 4 */ EM_DELETE_OR_LIST, /* ^D */
/* 5 */ ED_MOVE_TO_END, /* ^E */
/* 6 */ ED_NEXT_CHAR, /* ^F */
@@ -72,21 +82,21 @@
/* 12 */ ED_CLEAR_SCREEN, /* ^L */
/* 13 */ ED_NEWLINE, /* ^M */
/* 14 */ ED_NEXT_HISTORY, /* ^N */
- /* 15 */ ED_TTY_FLUSH_OUTPUT, /* ^O */
+ /* 15 */ ED_IGNORE, /* ^O */
/* 16 */ ED_PREV_HISTORY, /* ^P */
- /* 17 */ ED_TTY_START_OUTPUT, /* ^Q */
+ /* 17 */ ED_IGNORE, /* ^Q */
/* 18 */ ED_REDISPLAY, /* ^R */
- /* 19 */ ED_TTY_STOP_OUTPUT, /* ^S */
+ /* 19 */ ED_IGNORE, /* ^S */
/* 20 */ ED_TRANSPOSE_CHARS, /* ^T */
/* 21 */ EM_KILL_LINE, /* ^U */
/* 22 */ ED_QUOTED_INSERT, /* ^V */
/* 23 */ EM_KILL_REGION, /* ^W */
/* 24 */ ED_SEQUENCE_LEAD_IN, /* ^X */
/* 25 */ EM_YANK, /* ^Y */
- /* 26 */ ED_TTY_SIGTSTP, /* ^Z */
+ /* 26 */ ED_IGNORE, /* ^Z */
/* 27 */ EM_META_NEXT, /* ^[ */
- /* 28 */ ED_TTY_SIGQUIT, /* ^\ */
- /* 29 */ ED_TTY_DSUSP, /* ^] */
+ /* 28 */ ED_IGNORE, /* ^\ */
+ /* 29 */ ED_IGNORE, /* ^] */
/* 30 */ ED_UNASSIGNED, /* ^^ */
/* 31 */ ED_UNASSIGNED, /* ^_ */
/* 32 */ ED_INSERT, /* SPACE */
@@ -323,7 +333,7 @@
* insert mode characters are in the normal keymap, and command mode
* in the extended keymap.
*/
-private const el_action_t el_map_vi_insert[] = {
+static const el_action_t el_map_vi_insert[] = {
#ifdef KSHVI
/* 0 */ ED_UNASSIGNED, /* ^@ */
/* 1 */ ED_INSERT, /* ^A */
@@ -342,9 +352,9 @@
/* 14 */ ED_INSERT, /* ^N */
/* 15 */ ED_INSERT, /* ^O */
/* 16 */ ED_INSERT, /* ^P */
- /* 17 */ ED_TTY_START_OUTPUT, /* ^Q */
+ /* 17 */ ED_IGNORE, /* ^Q */
/* 18 */ ED_INSERT, /* ^R */
- /* 19 */ ED_TTY_STOP_OUTPUT, /* ^S */
+ /* 19 */ ED_IGNORE, /* ^S */
/* 20 */ ED_INSERT, /* ^T */
/* 21 */ VI_KILL_LINE_PREV, /* ^U */
/* 22 */ ED_QUOTED_INSERT, /* ^V */
@@ -354,7 +364,7 @@
/* 25 */ ED_INSERT, /* ^Y */
/* 26 */ ED_INSERT, /* ^Z */
/* 27 */ VI_COMMAND_MODE, /* ^[ */ /* [ Esc ] key */
- /* 28 */ ED_TTY_SIGQUIT, /* ^\ */
+ /* 28 */ ED_IGNORE, /* ^\ */
/* 29 */ ED_INSERT, /* ^] */
/* 30 */ ED_INSERT, /* ^^ */
/* 31 */ ED_INSERT, /* ^_ */
@@ -368,7 +378,7 @@
/* 0 */ ED_UNASSIGNED, /* ^@ */
/* 1 */ ED_MOVE_TO_BEG, /* ^A */
/* 2 */ ED_PREV_CHAR, /* ^B */
- /* 3 */ ED_TTY_SIGINT, /* ^C */
+ /* 3 */ ED_IGNORE, /* ^C */
/* 4 */ VI_LIST_OR_EOF, /* ^D */
/* 5 */ ED_MOVE_TO_END, /* ^E */
/* 6 */ ED_NEXT_CHAR, /* ^F */
@@ -380,20 +390,20 @@
/* 12 */ ED_CLEAR_SCREEN, /* ^L */
/* 13 */ ED_NEWLINE, /* ^M */
/* 14 */ ED_NEXT_HISTORY, /* ^N */
- /* 15 */ ED_TTY_FLUSH_OUTPUT, /* ^O */
+ /* 15 */ ED_IGNORE, /* ^O */
/* 16 */ ED_PREV_HISTORY, /* ^P */
- /* 17 */ ED_TTY_START_OUTPUT, /* ^Q */
+ /* 17 */ ED_IGNORE, /* ^Q */
/* 18 */ ED_REDISPLAY, /* ^R */
- /* 19 */ ED_TTY_STOP_OUTPUT, /* ^S */
+ /* 19 */ ED_IGNORE, /* ^S */
/* 20 */ ED_TRANSPOSE_CHARS, /* ^T */
/* 21 */ VI_KILL_LINE_PREV, /* ^U */
/* 22 */ ED_QUOTED_INSERT, /* ^V */
/* 23 */ ED_DELETE_PREV_WORD, /* ^W */
/* 24 */ ED_UNASSIGNED, /* ^X */
- /* 25 */ ED_TTY_DSUSP, /* ^Y */
- /* 26 */ ED_TTY_SIGTSTP, /* ^Z */
+ /* 25 */ ED_IGNORE, /* ^Y */
+ /* 26 */ ED_IGNORE, /* ^Z */
/* 27 */ VI_COMMAND_MODE, /* ^[ */
- /* 28 */ ED_TTY_SIGQUIT, /* ^\ */
+ /* 28 */ ED_IGNORE, /* ^\ */
/* 29 */ ED_UNASSIGNED, /* ^] */
/* 30 */ ED_UNASSIGNED, /* ^^ */
/* 31 */ ED_UNASSIGNED, /* ^_ */
@@ -624,11 +634,11 @@
/* 255 */ ED_INSERT /* M-^? */
};
-private const el_action_t el_map_vi_command[] = {
+static const el_action_t el_map_vi_command[] = {
/* 0 */ ED_UNASSIGNED, /* ^@ */
/* 1 */ ED_MOVE_TO_BEG, /* ^A */
/* 2 */ ED_UNASSIGNED, /* ^B */
- /* 3 */ ED_TTY_SIGINT, /* ^C */
+ /* 3 */ ED_IGNORE, /* ^C */
/* 4 */ ED_UNASSIGNED, /* ^D */
/* 5 */ ED_MOVE_TO_END, /* ^E */
/* 6 */ ED_UNASSIGNED, /* ^F */
@@ -640,11 +650,11 @@
/* 12 */ ED_CLEAR_SCREEN, /* ^L */
/* 13 */ ED_NEWLINE, /* ^M */
/* 14 */ ED_NEXT_HISTORY, /* ^N */
- /* 15 */ ED_TTY_FLUSH_OUTPUT, /* ^O */
+ /* 15 */ ED_IGNORE, /* ^O */
/* 16 */ ED_PREV_HISTORY, /* ^P */
- /* 17 */ ED_TTY_START_OUTPUT, /* ^Q */
+ /* 17 */ ED_IGNORE, /* ^Q */
/* 18 */ ED_REDISPLAY, /* ^R */
- /* 19 */ ED_TTY_STOP_OUTPUT, /* ^S */
+ /* 19 */ ED_IGNORE, /* ^S */
/* 20 */ ED_UNASSIGNED, /* ^T */
/* 21 */ VI_KILL_LINE_PREV, /* ^U */
/* 22 */ ED_UNASSIGNED, /* ^V */
@@ -653,7 +663,7 @@
/* 25 */ ED_UNASSIGNED, /* ^Y */
/* 26 */ ED_UNASSIGNED, /* ^Z */
/* 27 */ EM_META_NEXT, /* ^[ */
- /* 28 */ ED_TTY_SIGQUIT, /* ^\ */
+ /* 28 */ ED_IGNORE, /* ^\ */
/* 29 */ ED_UNASSIGNED, /* ^] */
/* 30 */ ED_UNASSIGNED, /* ^^ */
/* 31 */ ED_UNASSIGNED, /* ^_ */
@@ -887,7 +897,7 @@
/* map_init():
* Initialize and allocate the maps
*/
-protected int
+libedit_private int
map_init(EditLine *el)
{
@@ -915,12 +925,12 @@
el->el_map.help = el_malloc(sizeof(*el->el_map.help) * EL_NUM_FCNS);
if (el->el_map.help == NULL)
return -1;
- (void) memcpy(el->el_map.help, help__get(),
+ (void) memcpy(el->el_map.help, el_func_help,
sizeof(*el->el_map.help) * EL_NUM_FCNS);
el->el_map.func = el_malloc(sizeof(*el->el_map.func) * EL_NUM_FCNS);
if (el->el_map.func == NULL)
return -1;
- memcpy(el->el_map.func, func__get(), sizeof(*el->el_map.func)
+ memcpy(el->el_map.func, el_func, sizeof(*el->el_map.func)
* EL_NUM_FCNS);
el->el_map.nfunc = EL_NUM_FCNS;
@@ -936,7 +946,7 @@
/* map_end():
* Free the space taken by the editor maps
*/
-protected void
+libedit_private void
map_end(EditLine *el)
{
@@ -957,7 +967,7 @@
/* map_init_nls():
* Find all the printable keys and bind them to self insert
*/
-private void
+static void
map_init_nls(EditLine *el)
{
int i;
@@ -965,7 +975,7 @@
el_action_t *map = el->el_map.key;
for (i = 0200; i <= 0377; i++)
- if (Isprint(i))
+ if (iswprint(i))
map[i] = ED_INSERT;
}
@@ -973,10 +983,10 @@
/* map_init_meta():
* Bind all the meta keys to the appropriate ESC-<key> sequence
*/
-private void
+static void
map_init_meta(EditLine *el)
{
- Char buf[3];
+ wchar_t buf[3];
int i;
el_action_t *map = el->el_map.key;
el_action_t *alt = el->el_map.alt;
@@ -994,7 +1004,7 @@
} else
map = alt;
}
- buf[0] = (Char) i;
+ buf[0] = (wchar_t)i;
buf[2] = 0;
for (i = 0200; i <= 0377; i++)
switch (map[i]) {
@@ -1014,7 +1024,7 @@
/* map_init_vi():
* Initialize the vi bindings
*/
-protected void
+libedit_private void
map_init_vi(EditLine *el)
{
int i;
@@ -1044,11 +1054,11 @@
/* map_init_emacs():
* Initialize the emacs bindings
*/
-protected void
+libedit_private void
map_init_emacs(EditLine *el)
{
int i;
- Char buf[3];
+ wchar_t buf[3];
el_action_t *key = el->el_map.key;
el_action_t *alt = el->el_map.alt;
const el_action_t *emacs = el->el_map.emacs;
@@ -1078,15 +1088,15 @@
/* map_set_editor():
* Set the editor
*/
-protected int
-map_set_editor(EditLine *el, Char *editor)
+libedit_private int
+map_set_editor(EditLine *el, wchar_t *editor)
{
- if (Strcmp(editor, STR("emacs")) == 0) {
+ if (wcscmp(editor, L"emacs") == 0) {
map_init_emacs(el);
return 0;
}
- if (Strcmp(editor, STR("vi")) == 0) {
+ if (wcscmp(editor, L"vi") == 0) {
map_init_vi(el);
return 0;
}
@@ -1097,18 +1107,18 @@
/* map_get_editor():
* Retrieve the editor
*/
-protected int
-map_get_editor(EditLine *el, const Char **editor)
+libedit_private int
+map_get_editor(EditLine *el, const wchar_t **editor)
{
if (editor == NULL)
return -1;
switch (el->el_map.type) {
case MAP_EMACS:
- *editor = STR("emacs");
+ *editor = L"emacs";
return 0;
case MAP_VI:
- *editor = STR("vi");
+ *editor = L"vi";
return 0;
}
return -1;
@@ -1118,8 +1128,8 @@
/* map_print_key():
* Print the function description for 1 key
*/
-private void
-map_print_key(EditLine *el, el_action_t *map, const Char *in)
+static void
+map_print_key(EditLine *el, el_action_t *map, const wchar_t *in)
{
char outbuf[EL_BUFSIZ];
el_bindings_t *bp, *ep;
@@ -1130,7 +1140,7 @@
for (bp = el->el_map.help; bp < ep; bp++)
if (bp->func == map[(unsigned char) *in]) {
(void) fprintf(el->el_outfile,
- "%s\t->\t" FSTR "\n", outbuf, bp->name);
+ "%s\t->\t%ls\n", outbuf, bp->name);
return;
}
} else
@@ -1141,11 +1151,11 @@
/* map_print_some_keys():
* Print keys from first to last
*/
-private void
-map_print_some_keys(EditLine *el, el_action_t *map, Int first, Int last)
+static void
+map_print_some_keys(EditLine *el, el_action_t *map, wint_t first, wint_t last)
{
el_bindings_t *bp, *ep;
- Char firstbuf[2], lastbuf[2];
+ wchar_t firstbuf[2], lastbuf[2];
char unparsbuf[EL_BUFSIZ], extrabuf[EL_BUFSIZ];
firstbuf[0] = first;
@@ -1154,7 +1164,7 @@
lastbuf[1] = 0;
if (map[first] == ED_UNASSIGNED) {
if (first == last) {
- (void) keymacro__decode_str(firstbuf, unparsbuf,
+ (void) keymacro__decode_str(firstbuf, unparsbuf,
sizeof(unparsbuf), STRQQ);
(void) fprintf(el->el_outfile,
"%-15s-> is undefined\n", unparsbuf);
@@ -1165,17 +1175,17 @@
for (bp = el->el_map.help; bp < ep; bp++) {
if (bp->func == map[first]) {
if (first == last) {
- (void) keymacro__decode_str(firstbuf, unparsbuf,
+ (void) keymacro__decode_str(firstbuf, unparsbuf,
sizeof(unparsbuf), STRQQ);
- (void) fprintf(el->el_outfile, "%-15s-> " FSTR "\n",
+ (void) fprintf(el->el_outfile, "%-15s-> %ls\n",
unparsbuf, bp->name);
} else {
- (void) keymacro__decode_str(firstbuf, unparsbuf,
+ (void) keymacro__decode_str(firstbuf, unparsbuf,
sizeof(unparsbuf), STRQQ);
- (void) keymacro__decode_str(lastbuf, extrabuf,
+ (void) keymacro__decode_str(lastbuf, extrabuf,
sizeof(extrabuf), STRQQ);
(void) fprintf(el->el_outfile,
- "%-4s to %-7s-> " FSTR "\n",
+ "%-4s to %-7s-> %ls\n",
unparsbuf, extrabuf, bp->name);
}
return;
@@ -1183,14 +1193,14 @@
}
#ifdef MAP_DEBUG
if (map == el->el_map.key) {
- (void) keymacro__decode_str(firstbuf, unparsbuf,
+ (void) keymacro__decode_str(firstbuf, unparsbuf,
sizeof(unparsbuf), STRQQ);
(void) fprintf(el->el_outfile,
"BUG!!! %s isn't bound to anything.\n", unparsbuf);
(void) fprintf(el->el_outfile, "el->el_map.key[%d] == %d\n",
first, el->el_map.key[first]);
} else {
- (void) keymacro__decode_str(firstbuf, unparsbuf,
+ (void) keymacro__decode_str(firstbuf, unparsbuf,
sizeof(unparsbuf), STRQQ);
(void) fprintf(el->el_outfile,
"BUG!!! %s isn't bound to anything.\n", unparsbuf);
@@ -1205,7 +1215,7 @@
/* map_print_all_keys():
* Print the function description for all keys.
*/
-private void
+static void
map_print_all_keys(EditLine *el)
{
int prev, i;
@@ -1231,25 +1241,25 @@
map_print_some_keys(el, el->el_map.alt, prev, i - 1);
(void) fprintf(el->el_outfile, "Multi-character bindings\n");
- keymacro_print(el, STR(""));
+ keymacro_print(el, L"");
(void) fprintf(el->el_outfile, "Arrow key bindings\n");
- terminal_print_arrow(el, STR(""));
+ terminal_print_arrow(el, L"");
}
/* map_bind():
* Add/remove/change bindings
*/
-protected int
-map_bind(EditLine *el, int argc, const Char **argv)
+libedit_private int
+map_bind(EditLine *el, int argc, const wchar_t **argv)
{
el_action_t *map;
int ntype, rem;
- const Char *p;
- Char inbuf[EL_BUFSIZ];
- Char outbuf[EL_BUFSIZ];
- const Char *in = NULL;
- Char *out;
+ const wchar_t *p;
+ wchar_t inbuf[EL_BUFSIZ];
+ wchar_t outbuf[EL_BUFSIZ];
+ const wchar_t *in = NULL;
+ wchar_t *out;
el_bindings_t *bp, *ep;
int cmd;
int key;
@@ -1270,11 +1280,6 @@
case 's':
ntype = XK_STR;
break;
-#ifdef notyet
- case 'c':
- ntype = XK_EXE;
- break;
-#endif
case 'k':
key = 1;
break;
@@ -1295,13 +1300,13 @@
ep = &el->el_map.help[el->el_map.nfunc];
for (bp = el->el_map.help; bp < ep; bp++)
(void) fprintf(el->el_outfile,
- "" FSTR "\n\t" FSTR "\n",
+ "%ls\n\t%ls\n",
bp->name, bp->description);
return 0;
default:
(void) fprintf(el->el_errfile,
- "" FSTR ": Invalid switch `%c'.\n",
- argv[0], p[1]);
+ "%ls: Invalid switch `%lc'.\n",
+ argv[0], (wint_t)p[1]);
}
else
break;
@@ -1314,7 +1319,7 @@
in = argv[argc++];
else if ((in = parse__string(inbuf, argv[argc++])) == NULL) {
(void) fprintf(el->el_errfile,
- "" FSTR ": Invalid \\ or ^ in instring.\n",
+ "%ls: Invalid \\ or ^ in instring.\n",
argv[0]);
return -1;
}
@@ -1347,10 +1352,9 @@
switch (ntype) {
case XK_STR:
- case XK_EXE:
if ((out = parse__string(outbuf, argv[argc])) == NULL) {
(void) fprintf(el->el_errfile,
- "" FSTR ": Invalid \\ or ^ in outstring.\n", argv[0]);
+ "%ls: Invalid \\ or ^ in outstring.\n", argv[0]);
return -1;
}
if (key)
@@ -1363,7 +1367,7 @@
case XK_CMD:
if ((cmd = parse_cmd(el, argv[argc])) == -1) {
(void) fprintf(el->el_errfile,
- "" FSTR ": Invalid command `" FSTR "'.\n",
+ "%ls: Invalid command `%ls'.\n",
argv[0], argv[argc]);
return -1;
}
@@ -1392,11 +1396,12 @@
/* map_addfunc():
* add a user defined function
*/
-protected int
-map_addfunc(EditLine *el, const Char *name, const Char *help, el_func_t func)
+libedit_private int
+map_addfunc(EditLine *el, const wchar_t *name, const wchar_t *help,
+ el_func_t func)
{
void *p;
- size_t nf = (size_t)el->el_map.nfunc + 1;
+ size_t nf = el->el_map.nfunc + 1;
if (name == NULL || help == NULL || func == NULL)
return -1;
diff --git a/src/map.h b/src/map.h
index 8e0c7e4..b4e4e28 100644
--- a/src/map.h
+++ b/src/map.h
@@ -1,4 +1,4 @@
-/* $NetBSD: map.h,v 1.9 2009/12/30 22:37:40 christos Exp $ */
+/* $NetBSD: map.h,v 1.13 2016/05/09 21:46:56 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -40,12 +40,13 @@
#ifndef _h_el_map
#define _h_el_map
-typedef struct el_bindings_t { /* for the "bind" shell command */
- const Char *name; /* function name for bind command */
- int func; /* function numeric value */
- const Char *description; /* description of function */
-} el_bindings_t;
+typedef el_action_t (*el_func_t)(EditLine *, wint_t);
+typedef struct el_bindings_t { /* for the "bind" shell command */
+ const wchar_t *name; /* function name for bind command */
+ int func; /* function numeric value */
+ const wchar_t *description; /* description of function */
+} el_bindings_t;
typedef struct el_map_t {
el_action_t *alt; /* The current alternate key map */
@@ -57,7 +58,7 @@
int type; /* Emacs or vi */
el_bindings_t *help; /* The help for the editor functions */
el_func_t *func; /* List of available functions */
- int nfunc; /* The number of functions/help items */
+ size_t nfunc; /* The number of functions/help items */
} el_map_t;
#define MAP_EMACS 0
@@ -65,13 +66,14 @@
#define N_KEYS 256
-protected int map_bind(EditLine *, int, const Char **);
-protected int map_init(EditLine *);
-protected void map_end(EditLine *);
-protected void map_init_vi(EditLine *);
-protected void map_init_emacs(EditLine *);
-protected int map_set_editor(EditLine *, Char *);
-protected int map_get_editor(EditLine *, const Char **);
-protected int map_addfunc(EditLine *, const Char *, const Char *, el_func_t);
+libedit_private int map_bind(EditLine *, int, const wchar_t **);
+libedit_private int map_init(EditLine *);
+libedit_private void map_end(EditLine *);
+libedit_private void map_init_vi(EditLine *);
+libedit_private void map_init_emacs(EditLine *);
+libedit_private int map_set_editor(EditLine *, wchar_t *);
+libedit_private int map_get_editor(EditLine *, const wchar_t **);
+libedit_private int map_addfunc(EditLine *, const wchar_t *, const wchar_t *,
+ el_func_t);
#endif /* _h_el_map */
diff --git a/src/parse.c b/src/parse.c
index f1c4391..75c611e 100644
--- a/src/parse.c
+++ b/src/parse.c
@@ -1,4 +1,4 @@
-/* $NetBSD: parse.c,v 1.26 2011/08/16 16:25:15 christos Exp $ */
+/* $NetBSD: parse.c,v 1.41 2018/11/29 03:10:20 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -37,7 +37,7 @@
#if 0
static char sccsid[] = "@(#)parse.c 8.1 (Berkeley) 6/4/93";
#else
-__RCSID("$NetBSD: parse.c,v 1.26 2011/08/16 16:25:15 christos Exp $");
+__RCSID("$NetBSD: parse.c,v 1.41 2018/11/29 03:10:20 christos Exp $");
#endif
#endif /* not lint && not SCCSID */
@@ -54,38 +54,41 @@
* settc
* setty
*/
-#include "el.h"
#include <stdlib.h>
+#include <string.h>
-private const struct {
- const Char *name;
- int (*func)(EditLine *, int, const Char **);
+#include "el.h"
+#include "parse.h"
+
+static const struct {
+ const wchar_t *name;
+ int (*func)(EditLine *, int, const wchar_t **);
} cmds[] = {
- { STR("bind"), map_bind },
- { STR("echotc"), terminal_echotc },
- { STR("edit"), el_editmode },
- { STR("history"), hist_command },
- { STR("telltc"), terminal_telltc },
- { STR("settc"), terminal_settc },
- { STR("setty"), tty_stty },
- { NULL, NULL }
+ { L"bind", map_bind },
+ { L"echotc", terminal_echotc },
+ { L"edit", el_editmode },
+ { L"history", hist_command },
+ { L"telltc", terminal_telltc },
+ { L"settc", terminal_settc },
+ { L"setty", tty_stty },
+ { NULL, NULL }
};
/* parse_line():
* Parse a line and dispatch it
*/
-protected int
-parse_line(EditLine *el, const Char *line)
+libedit_private int
+parse_line(EditLine *el, const wchar_t *line)
{
- const Char **argv;
+ const wchar_t **argv;
int argc;
- TYPE(Tokenizer) *tok;
+ TokenizerW *tok;
- tok = FUN(tok,init)(NULL);
- FUN(tok,str)(tok, line, &argc, &argv);
- argc = FUN(el,parse)(el, argc, argv);
- FUN(tok,end)(tok);
+ tok = tok_winit(NULL);
+ tok_wstr(tok, line, &argc, &argv);
+ argc = el_wparse(el, argc, argv);
+ tok_wend(tok);
return argc;
}
@@ -93,26 +96,26 @@
/* el_parse():
* Command dispatcher
*/
-public int
-FUN(el,parse)(EditLine *el, int argc, const Char *argv[])
+int
+el_wparse(EditLine *el, int argc, const wchar_t *argv[])
{
- const Char *ptr;
+ const wchar_t *ptr;
int i;
if (argc < 1)
return -1;
- ptr = Strchr(argv[0], ':');
+ ptr = wcschr(argv[0], L':');
if (ptr != NULL) {
- Char *tprog;
+ wchar_t *tprog;
size_t l;
if (ptr == argv[0])
return 0;
- l = (size_t)(ptr - argv[0] - 1);
+ l = (size_t)(ptr - argv[0]);
tprog = el_malloc((l + 1) * sizeof(*tprog));
if (tprog == NULL)
return 0;
- (void) Strncpy(tprog, argv[0], l);
+ (void) wcsncpy(tprog, argv[0], l);
tprog[l] = '\0';
ptr++;
l = (size_t)el_match(el->el_prog, tprog);
@@ -123,7 +126,7 @@
ptr = argv[0];
for (i = 0; cmds[i].name != NULL; i++)
- if (Strcmp(cmds[i].name, ptr) == 0) {
+ if (wcscmp(cmds[i].name, ptr) == 0) {
i = (*cmds[i].func) (el, argc, argv);
return -i;
}
@@ -135,11 +138,11 @@
* Parse a string of the form ^<char> \<odigit> \<char> \U+xxxx and return
* the appropriate character or -1 if the escape is not valid
*/
-protected int
-parse__escape(const Char **ptr)
+libedit_private int
+parse__escape(const wchar_t **ptr)
{
- const Char *p;
- Int c;
+ const wchar_t *p;
+ wint_t c;
p = *ptr;
@@ -173,28 +176,28 @@
case 'e':
c = '\033'; /* Escape */
break;
- case 'U': /* Unicode \U+xxxx or \U+xxxxx format */
- {
- int i;
- const Char hex[] = STR("0123456789ABCDEF");
- const Char *h;
- ++p;
- if (*p++ != '+')
- return -1;
+ case 'U': /* Unicode \U+xxxx or \U+xxxxx format */
+ {
+ int i;
+ const wchar_t hex[] = L"0123456789ABCDEF";
+ const wchar_t *h;
+ ++p;
+ if (*p++ != '+')
+ return -1;
c = 0;
- for (i = 0; i < 5; ++i) {
- h = Strchr(hex, *p++);
- if (!h && i < 4)
- return -1;
- else if (h)
- c = (c << 4) | ((int)(h - hex));
- else
- --p;
- }
- if (c > 0x10FFFF) /* outside valid character range */
- return -1;
- break;
- }
+ for (i = 0; i < 5; ++i) {
+ h = wcschr(hex, *p++);
+ if (!h && i < 4)
+ return -1;
+ else if (h)
+ c = (c << 4) | ((int)(h - hex));
+ else
+ --p;
+ }
+ if (c > 0x10FFFF) /* outside valid character range */
+ return -1;
+ break;
+ }
case '0':
case '1':
case '2':
@@ -235,10 +238,10 @@
/* parse__string():
* Parse the escapes from in and put the raw string out
*/
-protected Char *
-parse__string(Char *out, const Char *in)
+libedit_private wchar_t *
+parse__string(wchar_t *out, const wchar_t *in)
{
- Char *rv = out;
+ wchar_t *rv = out;
int n;
for (;;)
@@ -251,7 +254,7 @@
case '^':
if ((n = parse__escape(&in)) == -1)
return NULL;
- *out++ = n;
+ *out++ = (wchar_t)n;
break;
case 'M':
@@ -273,13 +276,14 @@
* Return the command number for the command string given
* or -1 if one is not found
*/
-protected int
-parse_cmd(EditLine *el, const Char *cmd)
+libedit_private int
+parse_cmd(EditLine *el, const wchar_t *cmd)
{
- el_bindings_t *b;
+ el_bindings_t *b = el->el_map.help;
+ size_t i;
- for (b = el->el_map.help; b->name != NULL; b++)
- if (Strcmp(b->name, cmd) == 0)
- return b->func;
+ for (i = 0; i < el->el_map.nfunc; i++)
+ if (wcscmp(b[i].name, cmd) == 0)
+ return b[i].func;
return -1;
}
diff --git a/src/parse.h b/src/parse.h
index ec04051..fe8eb47 100644
--- a/src/parse.h
+++ b/src/parse.h
@@ -1,4 +1,4 @@
-/* $NetBSD: parse.h,v 1.7 2009/12/30 22:37:40 christos Exp $ */
+/* $NetBSD: parse.h,v 1.9 2016/05/09 21:46:56 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -40,9 +40,9 @@
#ifndef _h_el_parse
#define _h_el_parse
-protected int parse_line(EditLine *, const Char *);
-protected int parse__escape(const Char **);
-protected Char *parse__string(Char *, const Char *);
-protected int parse_cmd(EditLine *, const Char *);
+libedit_private int parse_line(EditLine *, const wchar_t *);
+libedit_private int parse__escape(const wchar_t **);
+libedit_private wchar_t *parse__string(wchar_t *, const wchar_t *);
+libedit_private int parse_cmd(EditLine *, const wchar_t *);
#endif /* _h_el_parse */
diff --git a/src/prompt.c b/src/prompt.c
index 48b2d27..026a746 100644
--- a/src/prompt.c
+++ b/src/prompt.c
@@ -1,4 +1,4 @@
-/* $NetBSD: prompt.c,v 1.20 2011/07/29 15:16:33 christos Exp $ */
+/* $NetBSD: prompt.c,v 1.27 2017/06/27 23:25:13 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -37,7 +37,7 @@
#if 0
static char sccsid[] = "@(#)prompt.c 8.1 (Berkeley) 6/4/93";
#else
-__RCSID("$NetBSD: prompt.c,v 1.20 2011/07/29 15:16:33 christos Exp $");
+__RCSID("$NetBSD: prompt.c,v 1.27 2017/06/27 23:25:13 christos Exp $");
#endif
#endif /* not lint && not SCCSID */
@@ -47,17 +47,17 @@
#include <stdio.h>
#include "el.h"
-private Char *prompt_default(EditLine *);
-private Char *prompt_default_r(EditLine *);
+static wchar_t *prompt_default(EditLine *);
+static wchar_t *prompt_default_r(EditLine *);
/* prompt_default():
* Just a default prompt, in case the user did not provide one
*/
-private Char *
+static wchar_t *
/*ARGSUSED*/
prompt_default(EditLine *el __attribute__((__unused__)))
{
- static Char a[3] = {'?', ' ', '\0'};
+ static wchar_t a[3] = L"? ";
return a;
}
@@ -66,11 +66,11 @@
/* prompt_default_r():
* Just a default rprompt, in case the user did not provide one
*/
-private Char *
+static wchar_t *
/*ARGSUSED*/
prompt_default_r(EditLine *el __attribute__((__unused__)))
{
- static Char a[1] = {'\0'};
+ static wchar_t a[1] = L"";
return a;
}
@@ -79,12 +79,11 @@
/* prompt_print():
* Print the prompt and update the prompt position.
*/
-protected void
+libedit_private void
prompt_print(EditLine *el, int op)
{
el_prompt_t *elp;
- Char *p;
- int ignore = 0;
+ wchar_t *p;
if (op == EL_PROMPT)
elp = &el->el_prompt;
@@ -99,13 +98,17 @@
for (; *p; p++) {
if (elp->p_ignore == *p) {
- ignore = !ignore;
+ wchar_t *litstart = ++p;
+ while (*p && *p != elp->p_ignore)
+ p++;
+ if (!*p || !p[1]) {
+ // XXX: We lose the last literal
+ break;
+ }
+ re_putliteral(el, litstart, p++);
continue;
}
- if (ignore)
- terminal__putc(el, *p);
- else
- re_putc(el, *p, 1);
+ re_putc(el, *p, 1);
}
elp->p_pos.v = el->el_refresh.r_cursor.v;
@@ -116,7 +119,7 @@
/* prompt_init():
* Initialize the prompt stuff
*/
-protected int
+libedit_private int
prompt_init(EditLine *el)
{
@@ -135,7 +138,7 @@
/* prompt_end():
* Clean up the prompt stuff
*/
-protected void
+libedit_private void
/*ARGSUSED*/
prompt_end(EditLine *el __attribute__((__unused__)))
{
@@ -145,8 +148,8 @@
/* prompt_set():
* Install a prompt printing function
*/
-protected int
-prompt_set(EditLine *el, el_pfunc_t prf, Char c, int op, int wide)
+libedit_private int
+prompt_set(EditLine *el, el_pfunc_t prf, wchar_t c, int op, int wide)
{
el_prompt_t *p;
@@ -177,8 +180,8 @@
/* prompt_get():
* Retrieve the prompt printing function
*/
-protected int
-prompt_get(EditLine *el, el_pfunc_t *prf, Char *c, int op)
+libedit_private int
+prompt_get(EditLine *el, el_pfunc_t *prf, wchar_t *c, int op)
{
el_prompt_t *p;
diff --git a/src/prompt.h b/src/prompt.h
index af63b82..2931428 100644
--- a/src/prompt.h
+++ b/src/prompt.h
@@ -1,4 +1,4 @@
-/* $NetBSD: prompt.h,v 1.10 2009/12/30 22:37:40 christos Exp $ */
+/* $NetBSD: prompt.h,v 1.15 2016/05/09 21:46:56 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -40,21 +40,19 @@
#ifndef _h_el_prompt
#define _h_el_prompt
-#include "histedit.h"
-
-typedef Char *(*el_pfunc_t)(EditLine *);
+typedef wchar_t *(*el_pfunc_t)(EditLine *);
typedef struct el_prompt_t {
el_pfunc_t p_func; /* Function to return the prompt */
coord_t p_pos; /* position in the line after prompt */
- Char p_ignore; /* character to start/end literal */
- int p_wide;
+ wchar_t p_ignore; /* character to start/end literal */
+ int p_wide;
} el_prompt_t;
-protected void prompt_print(EditLine *, int);
-protected int prompt_set(EditLine *, el_pfunc_t, Char, int, int);
-protected int prompt_get(EditLine *, el_pfunc_t *, Char *, int);
-protected int prompt_init(EditLine *);
-protected void prompt_end(EditLine *);
+libedit_private void prompt_print(EditLine *, int);
+libedit_private int prompt_set(EditLine *, el_pfunc_t, wchar_t, int, int);
+libedit_private int prompt_get(EditLine *, el_pfunc_t *, wchar_t *, int);
+libedit_private int prompt_init(EditLine *);
+libedit_private void prompt_end(EditLine *);
#endif /* _h_el_prompt */
diff --git a/src/read.c b/src/read.c
index df6ac20..0d7dd95 100644
--- a/src/read.c
+++ b/src/read.c
@@ -1,4 +1,4 @@
-/* $NetBSD: read.c,v 1.70 2013/05/27 23:55:55 christos Exp $ */
+/* $NetBSD: read.c,v 1.105 2018/11/25 16:21:04 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -37,49 +37,91 @@
#if 0
static char sccsid[] = "@(#)read.c 8.1 (Berkeley) 6/4/93";
#else
-__RCSID("$NetBSD: read.c,v 1.70 2013/05/27 23:55:55 christos Exp $");
+__RCSID("$NetBSD: read.c,v 1.105 2018/11/25 16:21:04 christos Exp $");
#endif
#endif /* not lint && not SCCSID */
/*
- * read.c: Clean this junk up! This is horrible code.
- * Terminal read functions
+ * read.c: Terminal read functions
*/
+#include <ctype.h>
#include <errno.h>
#include <fcntl.h>
-#include <unistd.h>
-#include <stdlib.h>
#include <limits.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
#include "el.h"
+#include "fcns.h"
+#include "read.h"
-#define OKCMD -1 /* must be -1! */
+#define EL_MAXMACRO 10
-private int read__fixio(int, int);
-private int read_preread(EditLine *);
-private int read_char(EditLine *, Char *);
-private int read_getcmd(EditLine *, el_action_t *, Char *);
-private void read_pop(c_macro_t *);
+struct macros {
+ wchar_t **macro;
+ int level;
+ int offset;
+};
+
+struct el_read_t {
+ struct macros macros;
+ el_rfunc_t read_char; /* Function to read a character. */
+ int read_errno;
+};
+
+static int read__fixio(int, int);
+static int read_char(EditLine *, wchar_t *);
+static int read_getcmd(EditLine *, el_action_t *, wchar_t *);
+static void read_clearmacros(struct macros *);
+static void read_pop(struct macros *);
+static const wchar_t *noedit_wgets(EditLine *, int *);
/* read_init():
* Initialize the read stuff
*/
-protected int
+libedit_private int
read_init(EditLine *el)
{
+ struct macros *ma;
+
+ if ((el->el_read = el_malloc(sizeof(*el->el_read))) == NULL)
+ return -1;
+
+ ma = &el->el_read->macros;
+ if ((ma->macro = el_malloc(EL_MAXMACRO *
+ sizeof(*ma->macro))) == NULL) {
+ free(el->el_read);
+ return -1;
+ }
+ ma->level = -1;
+ ma->offset = 0;
+
/* builtin read_char */
- el->el_read.read_char = read_char;
+ el->el_read->read_char = read_char;
return 0;
}
+/* el_read_end():
+ * Free the data structures used by the read stuff.
+ */
+libedit_private void
+read_end(struct el_read_t *el_read)
+{
+ read_clearmacros(&el_read->macros);
+ el_free(el_read->macros.macro);
+ el_read->macros.macro = NULL;
+ el_free(el_read);
+}
/* el_read_setfn():
* Set the read char function to the one provided.
* If it is set to EL_BUILTIN_GETCFN, then reset to the builtin one.
*/
-protected int
-el_read_setfn(EditLine *el, el_rfunc_t rc)
+libedit_private int
+el_read_setfn(struct el_read_t *el_read, el_rfunc_t rc)
{
- el->el_read.read_char = (rc == EL_BUILTIN_GETCFN) ? read_char : rc;
+ el_read->read_char = (rc == EL_BUILTIN_GETCFN) ? read_char : rc;
return 0;
}
@@ -88,42 +130,19 @@
* return the current read char function, or EL_BUILTIN_GETCFN
* if it is the default one
*/
-protected el_rfunc_t
-el_read_getfn(EditLine *el)
+libedit_private el_rfunc_t
+el_read_getfn(struct el_read_t *el_read)
{
- return el->el_read.read_char == read_char ?
- EL_BUILTIN_GETCFN : el->el_read.read_char;
+ return el_read->read_char == read_char ?
+ EL_BUILTIN_GETCFN : el_read->read_char;
}
-#ifndef MIN
-#define MIN(A,B) ((A) < (B) ? (A) : (B))
-#endif
-
-#ifdef DEBUG_EDIT
-private void
-read_debug(EditLine *el)
-{
-
- if (el->el_line.cursor > el->el_line.lastchar)
- (void) fprintf(el->el_errfile, "cursor > lastchar\r\n");
- if (el->el_line.cursor < el->el_line.buffer)
- (void) fprintf(el->el_errfile, "cursor < buffer\r\n");
- if (el->el_line.cursor > el->el_line.limit)
- (void) fprintf(el->el_errfile, "cursor > limit\r\n");
- if (el->el_line.lastchar > el->el_line.limit)
- (void) fprintf(el->el_errfile, "lastchar > limit\r\n");
- if (el->el_line.limit != &el->el_line.buffer[EL_BUFSIZ - 2])
- (void) fprintf(el->el_errfile, "limit != &buffer[EL_BUFSIZ-2]\r\n");
-}
-#endif /* DEBUG_EDIT */
-
-
/* read__fixio():
* Try to recover from a read error
*/
/* ARGSUSED */
-private int
+static int
read__fixio(int fd __attribute__((__unused__)), int e)
{
@@ -181,49 +200,17 @@
}
-/* read_preread():
- * Try to read the stuff in the input queue;
- */
-private int
-read_preread(EditLine *el)
-{
- int chrs = 0;
-
- if (el->el_tty.t_mode == ED_IO)
- return 0;
-
-#ifndef WIDECHAR
-/* FIONREAD attempts to buffer up multiple bytes, and to make that work
- * properly with partial wide/UTF-8 characters would need some careful work. */
-#ifdef FIONREAD
- (void) ioctl(el->el_infd, FIONREAD, &chrs);
- if (chrs > 0) {
- char buf[EL_BUFSIZ];
-
- chrs = read(el->el_infd, buf,
- (size_t) MIN(chrs, EL_BUFSIZ - 1));
- if (chrs > 0) {
- buf[chrs] = '\0';
- el_push(el, buf);
- }
- }
-#endif /* FIONREAD */
-#endif
- return chrs > 0;
-}
-
-
/* el_push():
* Push a macro
*/
-public void
-FUN(el,push)(EditLine *el, const Char *str)
+void
+el_wpush(EditLine *el, const wchar_t *str)
{
- c_macro_t *ma = &el->el_chared.c_macro;
+ struct macros *ma = &el->el_read->macros;
if (str != NULL && ma->level + 1 < EL_MAXMACRO) {
ma->level++;
- if ((ma->macro[ma->level] = Strdup(str)) != NULL)
+ if ((ma->macro[ma->level] = wcsdup(str)) != NULL)
return;
ma->level--;
}
@@ -233,24 +220,22 @@
/* read_getcmd():
- * Get next command from the input stream, return OKCMD on success.
+ * Get next command from the input stream,
+ * return 0 on success or -1 on EOF or error.
* Character values > 255 are not looked up in the map, but inserted.
*/
-private int
-read_getcmd(EditLine *el, el_action_t *cmdnum, Char *ch)
+static int
+read_getcmd(EditLine *el, el_action_t *cmdnum, wchar_t *ch)
{
+ static const wchar_t meta = (wchar_t)0x80;
el_action_t cmd;
- int num;
- el->el_errno = 0;
do {
- if ((num = FUN(el,getc)(el, ch)) != 1) {/* if EOF or error */
- el->el_errno = num == 0 ? 0 : errno;
- return 0; /* not OKCMD */
- }
+ if (el_wgetc(el, ch) != 1)
+ return -1;
#ifdef KANJI
- if ((*ch & 0200)) {
+ if ((*ch & meta)) {
el->el_state.metanext = 0;
cmd = CcViMap[' '];
break;
@@ -259,13 +244,11 @@
if (el->el_state.metanext) {
el->el_state.metanext = 0;
- *ch |= 0200;
+ *ch |= meta;
}
-#ifdef WIDECHAR
if (*ch >= N_KEYS)
cmd = ED_INSERT;
else
-#endif
cmd = el->el_map.current[(unsigned char) *ch];
if (cmd == ED_SEQUENCE_LEAD_IN) {
keymacro_value_t val;
@@ -274,49 +257,31 @@
cmd = val.cmd;
break;
case XK_STR:
- FUN(el,push)(el, val.str);
+ el_wpush(el, val.str);
break;
-#ifdef notyet
- case XK_EXE:
- /* XXX: In the future to run a user function */
- RunCommand(val.str);
- break;
-#endif
+ case XK_NOD:
+ return -1;
default:
EL_ABORT((el->el_errfile, "Bad XK_ type \n"));
break;
}
}
- if (el->el_map.alt == NULL)
- el->el_map.current = el->el_map.key;
} while (cmd == ED_SEQUENCE_LEAD_IN);
*cmdnum = cmd;
- return OKCMD;
+ return 0;
}
-#ifdef WIDECHAR
-/* utf8_islead():
- * Test whether a byte is a leading byte of a UTF-8 sequence.
- */
-private int
-utf8_islead(int c)
-{
- return c < 0x80 || /* single byte char */
- (c >= 0xc2 && c <= 0xf4); /* start of multibyte sequence */
-}
-#endif
-
/* read_char():
* Read a character from the tty.
*/
-private int
-read_char(EditLine *el, Char *cp)
+static int
+read_char(EditLine *el, wchar_t *cp)
{
ssize_t num_read;
int tried = 0;
char cbuf[MB_LEN_MAX];
size_t cbp = 0;
- int bytes = 0;
+ int save_errno = errno;
again:
el->el_signal->sig_no = 0;
@@ -324,7 +289,7 @@
int e = errno;
switch (el->el_signal->sig_no) {
case SIGCONT:
- FUN(el,set)(el, EL_REFRESH);
+ el_wset(el, EL_REFRESH);
/*FALLTHROUGH*/
case SIGWINCH:
sig_set(el);
@@ -332,57 +297,63 @@
default:
break;
}
- if (!tried && read__fixio(el->el_infd, e) == 0)
+ if (!tried && read__fixio(el->el_infd, e) == 0) {
+ errno = save_errno;
tried = 1;
- else {
+ } else {
errno = e;
- *cp = '\0';
+ *cp = L'\0';
return -1;
}
}
/* Test for EOF */
if (num_read == 0) {
- errno = 0;
- *cp = '\0';
+ *cp = L'\0';
return 0;
}
-#ifdef WIDECHAR
- if (el->el_flags & CHARSET_IS_UTF8) {
- if (!utf8_islead((unsigned char)cbuf[0]))
- goto again; /* discard the byte we read and try again */
+ for (;;) {
+ mbstate_t mbs;
+
++cbp;
- if ((bytes = ct_mbtowc(cp, cbuf, cbp)) == -1) {
- ct_mbtowc_reset;
- if (cbp >= MB_LEN_MAX) { /* "shouldn't happen" */
+ /* This only works because UTF8 is stateless. */
+ memset(&mbs, 0, sizeof(mbs));
+ switch (mbrtowc(cp, cbuf, cbp, &mbs)) {
+ case (size_t)-1:
+ if (cbp > 1) {
+ /*
+ * Invalid sequence, discard all bytes
+ * except the last one.
+ */
+ cbuf[0] = cbuf[cbp - 1];
+ cbp = 0;
+ break;
+ } else {
+ /* Invalid byte, discard it. */
+ cbp = 0;
+ goto again;
+ }
+ case (size_t)-2:
+ if (cbp >= MB_LEN_MAX) {
errno = EILSEQ;
- *cp = '\0';
+ *cp = L'\0';
return -1;
}
+ /* Incomplete sequence, read another byte. */
goto again;
+ default:
+ /* Valid character, process it. */
+ return 1;
}
- } else if (isascii((unsigned char)cbuf[0]) ||
- /* we don't support other multibyte charsets */
- ++cbp != 1 ||
- /* Try non-ASCII characters in a 8-bit character set */
- (bytes = ct_mbtowc(cp, cbuf, cbp)) != 1)
-#endif
- *cp = (unsigned char)cbuf[0];
-
- if ((el->el_flags & IGNORE_EXTCHARS) && bytes > 1) {
- cbp = 0; /* skip this character */
- goto again;
}
-
- return (int)num_read;
}
/* read_pop():
* Pop a macro from the stack
*/
-private void
-read_pop(c_macro_t *ma)
+static void
+read_pop(struct macros *ma)
{
int i;
@@ -393,22 +364,25 @@
ma->offset = 0;
}
-/* el_getc():
- * Read a character
- */
-public int
-FUN(el,getc)(EditLine *el, Char *cp)
+static void
+read_clearmacros(struct macros *ma)
{
+ while (ma->level >= 0)
+ el_free(ma->macro[ma->level--]);
+ ma->offset = 0;
+}
+
+/* el_wgetc():
+ * Read a wide character
+ */
+int
+el_wgetc(EditLine *el, wchar_t *cp)
+{
+ struct macros *ma = &el->el_read->macros;
int num_read;
- c_macro_t *ma = &el->el_chared.c_macro;
terminal__flush(el);
for (;;) {
- if (ma->level < 0) {
- if (!read_preread(el))
- break;
- }
-
if (ma->level < 0)
break;
@@ -427,29 +401,23 @@
return 1;
}
-#ifdef DEBUG_READ
- (void) fprintf(el->el_errfile, "Turning raw mode on\n");
-#endif /* DEBUG_READ */
if (tty_rawmode(el) < 0)/* make sure the tty is set up correctly */
return 0;
-#ifdef DEBUG_READ
- (void) fprintf(el->el_errfile, "Reading a character\n");
-#endif /* DEBUG_READ */
- num_read = (*el->el_read.read_char)(el, cp);
+ num_read = (*el->el_read->read_char)(el, cp);
+
+ /*
+ * Remember the original reason of a read failure
+ * such that el_wgets() can restore it after doing
+ * various cleanup operation that might change errno.
+ */
if (num_read < 0)
- el->el_errno = errno;
-#ifdef WIDECHAR
- if (el->el_flags & NARROW_READ)
- *cp = *(char *)(void *)cp;
-#endif
-#ifdef DEBUG_READ
- (void) fprintf(el->el_errfile, "Got it %c\n", *cp);
-#endif /* DEBUG_READ */
+ el->el_read->read_errno = errno;
+
return num_read;
}
-protected void
+libedit_private void
read_prepare(EditLine *el)
{
if (el->el_flags & HANDLE_SIGNALS)
@@ -463,14 +431,14 @@
we have the wrong size. */
el_resize(el);
re_clear_display(el); /* reset the display stuff */
- ch_reset(el, 0);
+ ch_reset(el);
re_refresh(el); /* print the prompt */
if (el->el_flags & UNBUFFERED)
terminal__flush(el);
}
-protected void
+libedit_private void
read_finish(EditLine *el)
{
if ((el->el_flags & UNBUFFERED) == 0)
@@ -479,54 +447,52 @@
sig_clr(el);
}
-public const Char *
-FUN(el,gets)(EditLine *el, int *nread)
+static const wchar_t *
+noedit_wgets(EditLine *el, int *nread)
+{
+ el_line_t *lp = &el->el_line;
+ int num;
+
+ while ((num = (*el->el_read->read_char)(el, lp->lastchar)) == 1) {
+ if (lp->lastchar + 1 >= lp->limit &&
+ !ch_enlargebufs(el, (size_t)2))
+ break;
+ lp->lastchar++;
+ if (el->el_flags & UNBUFFERED ||
+ lp->lastchar[-1] == '\r' ||
+ lp->lastchar[-1] == '\n')
+ break;
+ }
+ if (num == -1 && errno == EINTR)
+ lp->lastchar = lp->buffer;
+ lp->cursor = lp->lastchar;
+ *lp->lastchar = '\0';
+ *nread = (int)(lp->lastchar - lp->buffer);
+ return *nread ? lp->buffer : NULL;
+}
+
+const wchar_t *
+el_wgets(EditLine *el, int *nread)
{
int retval;
el_action_t cmdnum = 0;
int num; /* how many chars we have read at NL */
- Char ch, *cp;
- int crlf = 0;
+ wchar_t ch;
int nrb;
-#ifdef FIONREAD
- c_macro_t *ma = &el->el_chared.c_macro;
-#endif /* FIONREAD */
if (nread == NULL)
nread = &nrb;
*nread = 0;
+ el->el_read->read_errno = 0;
if (el->el_flags & NO_TTY) {
- size_t idx;
-
- cp = el->el_line.buffer;
- while ((num = (*el->el_read.read_char)(el, cp)) == 1) {
- /* make sure there is space for next character */
- if (cp + 1 >= el->el_line.limit) {
- idx = (size_t)(cp - el->el_line.buffer);
- if (!ch_enlargebufs(el, (size_t)2))
- break;
- cp = &el->el_line.buffer[idx];
- }
- cp++;
- if (el->el_flags & UNBUFFERED)
- break;
- if (cp[-1] == '\r' || cp[-1] == '\n')
- break;
- }
- if (num == -1) {
- if (errno == EINTR)
- cp = el->el_line.buffer;
- el->el_errno = errno;
- }
-
- goto noedit;
+ el->el_line.lastchar = el->el_line.buffer;
+ return noedit_wgets(el, nread);
}
-
#ifdef FIONREAD
- if (el->el_tty.t_mode == EX_IO && ma->level < 0) {
- long chrs = 0;
+ if (el->el_tty.t_mode == EX_IO && el->el_read->macros.level < 0) {
+ int chrs = 0;
(void) ioctl(el->el_infd, FIONREAD, &chrs);
if (chrs == 0) {
@@ -543,82 +509,19 @@
read_prepare(el);
if (el->el_flags & EDIT_DISABLED) {
- size_t idx;
-
if ((el->el_flags & UNBUFFERED) == 0)
- cp = el->el_line.buffer;
- else
- cp = el->el_line.lastchar;
-
+ el->el_line.lastchar = el->el_line.buffer;
terminal__flush(el);
-
- while ((num = (*el->el_read.read_char)(el, cp)) == 1) {
- /* make sure there is space next character */
- if (cp + 1 >= el->el_line.limit) {
- idx = (size_t)(cp - el->el_line.buffer);
- if (!ch_enlargebufs(el, (size_t)2))
- break;
- cp = &el->el_line.buffer[idx];
- }
- cp++;
- crlf = cp[-1] == '\r' || cp[-1] == '\n';
- if (el->el_flags & UNBUFFERED)
- break;
- if (crlf)
- break;
- }
-
- if (num == -1) {
- if (errno == EINTR)
- cp = el->el_line.buffer;
- el->el_errno = errno;
- }
-
- goto noedit;
+ return noedit_wgets(el, nread);
}
- for (num = OKCMD; num == OKCMD;) { /* while still editing this
- * line */
-#ifdef DEBUG_EDIT
- read_debug(el);
-#endif /* DEBUG_EDIT */
+ for (num = -1; num == -1;) { /* while still editing this line */
/* if EOF or error */
- if ((num = read_getcmd(el, &cmdnum, &ch)) != OKCMD) {
- num = -1;
-#ifdef DEBUG_READ
- (void) fprintf(el->el_errfile,
- "Returning from el_gets %d\n", num);
-#endif /* DEBUG_READ */
+ if (read_getcmd(el, &cmdnum, &ch) == -1)
break;
- }
- if (el->el_errno == EINTR) {
- el->el_line.buffer[0] = '\0';
- el->el_line.lastchar =
- el->el_line.cursor = el->el_line.buffer;
- break;
- }
- if ((unsigned int)cmdnum >= (unsigned int)el->el_map.nfunc) { /* BUG CHECK command */
-#ifdef DEBUG_EDIT
- (void) fprintf(el->el_errfile,
- "ERROR: illegal command from key 0%o\r\n", ch);
-#endif /* DEBUG_EDIT */
+ if ((size_t)cmdnum >= el->el_map.nfunc) /* BUG CHECK command */
continue; /* try again */
- }
/* now do the real command */
-#ifdef DEBUG_READ
- {
- el_bindings_t *b;
- for (b = el->el_map.help; b->name; b++)
- if (b->func == cmdnum)
- break;
- if (b->name)
- (void) fprintf(el->el_errfile,
- "Executing %s\n", b->name);
- else
- (void) fprintf(el->el_errfile,
- "Error command = %d\n", cmdnum);
- }
-#endif /* DEBUG_READ */
/* vi redo needs these way down the levels... */
el->el_state.thiscmd = cmdnum;
el->el_state.thisch = ch;
@@ -627,16 +530,12 @@
el->el_chared.c_redo.pos < el->el_chared.c_redo.lim) {
if (cmdnum == VI_DELETE_PREV_CHAR &&
el->el_chared.c_redo.pos != el->el_chared.c_redo.buf
- && Isprint(el->el_chared.c_redo.pos[-1]))
+ && iswprint(el->el_chared.c_redo.pos[-1]))
el->el_chared.c_redo.pos--;
else
*el->el_chared.c_redo.pos++ = ch;
}
retval = (*el->el_map.func[cmdnum]) (el, ch);
-#ifdef DEBUG_READ
- (void) fprintf(el->el_errfile,
- "Returned state %d\n", retval );
-#endif /* DEBUG_READ */
/* save the last command here */
el->el_state.lastcmd = cmdnum;
@@ -683,22 +582,15 @@
break;
case CC_FATAL: /* fatal error, reset to known state */
-#ifdef DEBUG_READ
- (void) fprintf(el->el_errfile,
- "*** editor fatal ERROR ***\r\n\n");
-#endif /* DEBUG_READ */
/* put (real) cursor in a known place */
re_clear_display(el); /* reset the display stuff */
- ch_reset(el, 1); /* reset the input pointers */
+ ch_reset(el); /* reset the input pointers */
+ read_clearmacros(&el->el_read->macros);
re_refresh(el); /* print the prompt again */
break;
case CC_ERROR:
default: /* functions we don't know about */
-#ifdef DEBUG_READ
- (void) fprintf(el->el_errfile,
- "*** editor ERROR ***\r\n\n");
-#endif /* DEBUG_READ */
terminal_beep(el);
terminal__flush(el);
break;
@@ -715,19 +607,14 @@
if ((el->el_flags & UNBUFFERED) == 0) {
read_finish(el);
*nread = num != -1 ? num : 0;
- } else {
+ } else
*nread = (int)(el->el_line.lastchar - el->el_line.buffer);
- }
- goto done;
-noedit:
- el->el_line.cursor = el->el_line.lastchar = cp;
- *cp = '\0';
- *nread = (int)(el->el_line.cursor - el->el_line.buffer);
-done:
+
if (*nread == 0) {
if (num == -1) {
*nread = -1;
- errno = el->el_errno;
+ if (el->el_read->read_errno)
+ errno = el->el_read->read_errno;
}
return NULL;
} else
diff --git a/src/read.h b/src/read.h
index 852606a..1acf5d6 100644
--- a/src/read.h
+++ b/src/read.h
@@ -1,4 +1,4 @@
-/* $NetBSD: read.h,v 1.7 2009/12/30 22:37:40 christos Exp $ */
+/* $NetBSD: read.h,v 1.12 2016/05/22 19:44:26 christos Exp $ */
/*-
* Copyright (c) 2001 The NetBSD Foundation, Inc.
@@ -35,16 +35,11 @@
#ifndef _h_el_read
#define _h_el_read
-typedef int (*el_rfunc_t)(EditLine *, Char *);
-
-typedef struct el_read_t {
- el_rfunc_t read_char; /* Function to read a character */
-} el_read_t;
-
-protected int read_init(EditLine *);
-protected void read_prepare(EditLine *);
-protected void read_finish(EditLine *);
-protected int el_read_setfn(EditLine *, el_rfunc_t);
-protected el_rfunc_t el_read_getfn(EditLine *);
+libedit_private int read_init(EditLine *);
+libedit_private void read_end(struct el_read_t *);
+libedit_private void read_prepare(EditLine *);
+libedit_private void read_finish(EditLine *);
+libedit_private int el_read_setfn(struct el_read_t *, el_rfunc_t);
+libedit_private el_rfunc_t el_read_getfn(struct el_read_t *);
#endif /* _h_el_read */
diff --git a/src/readline.c b/src/readline.c
index 8cb43b9..778e6c2 100644
--- a/src/readline.c
+++ b/src/readline.c
@@ -1,4 +1,4 @@
-/* $NetBSD: readline.c,v 1.108 2013/05/28 00:10:34 christos Exp $ */
+/* $NetBSD: readline.c,v 1.151 2019/02/15 23:20:35 christos Exp $ */
/*-
* Copyright (c) 1997 The NetBSD Foundation, Inc.
@@ -31,28 +31,28 @@
#include "config.h"
#if !defined(lint) && !defined(SCCSID)
-__RCSID("$NetBSD: readline.c,v 1.108 2013/05/28 00:10:34 christos Exp $");
+__RCSID("$NetBSD: readline.c,v 1.151 2019/02/15 23:20:35 christos Exp $");
#endif /* not lint && not SCCSID */
#include <sys/types.h>
#include <sys/stat.h>
-#include <stdio.h>
-#include <dirent.h>
-#include <string.h>
-#include <pwd.h>
#include <ctype.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <limits.h>
+#include <dirent.h>
#include <errno.h>
#include <fcntl.h>
+#include <limits.h>
+#include <pwd.h>
#include <setjmp.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
#include <vis.h>
#include "editline/readline.h"
#include "el.h"
-#include "fcns.h" /* for EL_NUM_FCNS */
-#include "histedit.h"
+#include "fcns.h"
#include "filecomplete.h"
#if !defined(SIZE_T_MAX)
@@ -76,15 +76,15 @@
static char expand_chars[] = { ' ', '\t', '\n', '=', '(', '\0' };
static char break_chars[] = { ' ', '\t', '\n', '"', '\\', '\'', '`', '@', '$',
'>', '<', '=', ';', '|', '&', '{', '(', '\0' };
-char *rl_readline_name = empty;
+const char *rl_readline_name = empty;
FILE *rl_instream = NULL;
FILE *rl_outstream = NULL;
int rl_point = 0;
int rl_end = 0;
char *rl_line_buffer = NULL;
-VCPFunction *rl_linefunc = NULL;
+rl_vcpfunc_t *rl_linefunc = NULL;
int rl_done = 0;
-VFunction *rl_event_hook = NULL;
+rl_hook_func_t *rl_event_hook = NULL;
KEYMAP_ENTRY_ARRAY emacs_standard_keymap,
emacs_meta_keymap,
emacs_ctlx_keymap;
@@ -99,6 +99,7 @@
int history_base = 1; /* probably never subject to change */
int history_length = 0;
+int history_offset = 0;
int max_input_history = 0;
char history_expansion_char = '!';
char history_subst_char = '^';
@@ -108,12 +109,12 @@
int rl_inhibit_completion = 0;
int rl_attempted_completion_over = 0;
-char *rl_basic_word_break_characters = break_chars;
+const char *rl_basic_word_break_characters = break_chars;
char *rl_completer_word_break_characters = NULL;
char *rl_completer_quote_characters = NULL;
-Function *rl_completion_entry_function = NULL;
+rl_compentry_func_t *rl_completion_entry_function = NULL;
char *(*rl_completion_word_break_hook)(void) = NULL;
-CPPFunction *rl_attempted_completion_function = NULL;
+rl_completion_func_t *rl_attempted_completion_function = NULL;
Function *rl_pre_input_hook = NULL;
Function *rl_startup1_hook = NULL;
int (*rl_getc_function)(FILE *) = NULL;
@@ -125,6 +126,7 @@
int _rl_print_completions_horizontally = 0;
VFunction *rl_redisplay_function = NULL;
Function *rl_startup_hook = NULL;
+int rl_did_startup_hook = 0;
VFunction *rl_completion_display_matches_hook = NULL;
VFunction *rl_prep_term_function = (VFunction *)rl_prep_terminal;
VFunction *rl_deprep_term_function = (VFunction *)rl_deprep_terminal;
@@ -152,7 +154,7 @@
* in the parsed text when it is passed to the completion function.
* Shell uses this to help determine what kind of completing to do.
*/
-char *rl_special_prefixes = NULL;
+const char *rl_special_prefixes = NULL;
/*
* This is the character appended to the completed words if at the end of
@@ -164,22 +166,22 @@
static History *h = NULL;
static EditLine *e = NULL;
-static Function *map[256];
+static rl_command_func_t *map[256];
static jmp_buf topbuf;
/* internal functions */
static unsigned char _el_rl_complete(EditLine *, int);
static unsigned char _el_rl_tstp(EditLine *, int);
static char *_get_prompt(EditLine *);
-static int _getc_function(EditLine *, char *);
-static HIST_ENTRY *_move_history(int);
+static int _getc_function(EditLine *, wchar_t *);
static int _history_expand_command(const char *, size_t, size_t,
char **);
static char *_rl_compat_sub(const char *, const char *,
const char *, int);
-static int _rl_event_read_char(EditLine *, char *);
+static int _rl_event_read_char(EditLine *, wchar_t *);
static void _rl_update_pos(void);
+static HIST_ENTRY rl_he;
/* ARGSUSED */
static char *
@@ -191,37 +193,18 @@
/*
- * generic function for moving around history
- */
-static HIST_ENTRY *
-_move_history(int op)
-{
- HistEvent ev;
- static HIST_ENTRY rl_he;
-
- if (history(h, &ev, op) != 0)
- return NULL;
-
- rl_he.line = ev.str;
- rl_he.data = NULL;
-
- return &rl_he;
-}
-
-
-/*
* read one key from user defined input function
*/
static int
/*ARGSUSED*/
-_getc_function(EditLine *el __attribute__((__unused__)), char *c)
+_getc_function(EditLine *el __attribute__((__unused__)), wchar_t *c)
{
int i;
- i = (*rl_getc_function)(NULL);
+ i = (*rl_getc_function)(rl_instream);
if (i == -1)
return 0;
- *c = (char)i;
+ *c = (wchar_t)i;
return 1;
}
@@ -240,13 +223,20 @@
_default_history_file(void)
{
struct passwd *p;
- static char path[PATH_MAX];
+ static char *path;
+ size_t len;
- if (*path)
+ if (path)
return path;
+
if ((p = getpwuid(getuid())) == NULL)
return NULL;
- (void)snprintf(path, sizeof(path), "%s/.history", p->pw_dir);
+
+ len = strlen(p->pw_dir) + sizeof("/.history");
+ if ((path = malloc(len)) == NULL)
+ return NULL;
+
+ (void)snprintf(path, len, "%s/.history", p->pw_dir);
return path;
}
@@ -264,7 +254,7 @@
if (!prompt)
prompt = "";
- if (rl_prompt != NULL && strcmp(rl_prompt, prompt) == 0)
+ if (rl_prompt != NULL && strcmp(rl_prompt, prompt) == 0)
return 0;
if (rl_prompt)
el_free(rl_prompt);
@@ -304,7 +294,9 @@
if (tcgetattr(fileno(rl_instream), &t) != -1 && (t.c_lflag & ECHO) == 0)
editmode = 0;
- e = el_init(rl_readline_name, rl_instream, rl_outstream, stderr);
+ e = el_init_internal(rl_readline_name, rl_instream, rl_outstream,
+ stderr, fileno(rl_instream), fileno(rl_outstream), fileno(stderr),
+ NO_RESET);
if (!editmode)
el_set(e, EL_EDITMODE, 0);
@@ -331,11 +323,11 @@
el_end(e);
return -1;
}
- el_set(e, EL_PROMPT, _get_prompt, RL_PROMPT_START_IGNORE);
+ el_set(e, EL_PROMPT_ESC, _get_prompt, RL_PROMPT_START_IGNORE);
el_set(e, EL_SIGNAL, rl_catch_signals);
/* set default mode to "emacs"-style and read setting afterwards */
- /* so this can be overriden */
+ /* so this can be overridden */
el_set(e, EL_EDITOR, "emacs");
if (rl_terminal_name != NULL)
el_set(e, EL_TERMINAL, rl_terminal_name);
@@ -358,7 +350,38 @@
"ReadLine compatible suspend function",
_el_rl_tstp);
el_set(e, EL_BIND, "^Z", "rl_tstp", NULL);
-
+
+ /*
+ * Set some readline compatible key-bindings.
+ */
+ el_set(e, EL_BIND, "^R", "em-inc-search-prev", NULL);
+
+ /*
+ * Allow the use of Home/End keys.
+ */
+ el_set(e, EL_BIND, "\\e[1~", "ed-move-to-beg", NULL);
+ el_set(e, EL_BIND, "\\e[4~", "ed-move-to-end", NULL);
+ el_set(e, EL_BIND, "\\e[7~", "ed-move-to-beg", NULL);
+ el_set(e, EL_BIND, "\\e[8~", "ed-move-to-end", NULL);
+ el_set(e, EL_BIND, "\\e[H", "ed-move-to-beg", NULL);
+ el_set(e, EL_BIND, "\\e[F", "ed-move-to-end", NULL);
+
+ /*
+ * Allow the use of the Delete/Insert keys.
+ */
+ el_set(e, EL_BIND, "\\e[3~", "ed-delete-next-char", NULL);
+ el_set(e, EL_BIND, "\\e[2~", "ed-quoted-insert", NULL);
+
+ /*
+ * Ctrl-left-arrow and Ctrl-right-arrow for word moving.
+ */
+ el_set(e, EL_BIND, "\\e[1;5C", "em-next-word", NULL);
+ el_set(e, EL_BIND, "\\e[1;5D", "ed-prev-word", NULL);
+ el_set(e, EL_BIND, "\\e[5C", "em-next-word", NULL);
+ el_set(e, EL_BIND, "\\e[5D", "ed-prev-word", NULL);
+ el_set(e, EL_BIND, "\\e\\e[C", "em-next-word", NULL);
+ el_set(e, EL_BIND, "\\e\\e[D", "ed-prev-word", NULL);
+
/* read settings from configuration file */
el_source(e, NULL);
@@ -369,8 +392,7 @@
_resize_fun(e, &rl_line_buffer);
_rl_update_pos();
- if (rl_startup_hook)
- (*rl_startup_hook)(NULL, 0);
+ tty_end(e, TCSADRAIN);
return 0;
}
@@ -392,19 +414,26 @@
if (e == NULL || h == NULL)
rl_initialize();
+ if (rl_did_startup_hook == 0 && rl_startup_hook) {
+ rl_did_startup_hook = 1;
+ (*rl_startup_hook)(NULL, 0);
+ }
+ tty_init(e);
+
rl_done = 0;
(void)setjmp(topbuf);
+ buf = NULL;
/* update prompt accordingly to what has been passed */
if (rl_set_prompt(prompt) == -1)
- return NULL;
+ goto out;
if (rl_pre_input_hook)
(*rl_pre_input_hook)(NULL, 0);
- if (rl_event_hook && !(e->el_flags&NO_TTY)) {
+ if (rl_event_hook && !(e->el_flags & NO_TTY)) {
el_set(e, EL_GETCFN, _rl_event_read_char);
used_event_hook = 1;
}
@@ -424,7 +453,7 @@
buf = strdup(ret);
if (buf == NULL)
- return NULL;
+ goto out;
lastidx = count - 1;
if (buf[lastidx] == '\n')
buf[lastidx] = '\0';
@@ -434,6 +463,8 @@
history(h, &ev, H_GETSIZE);
history_length = ev.num;
+out:
+ tty_end(e, TCSADRAIN);
return buf;
}
@@ -450,6 +481,7 @@
{
if (h == NULL || e == NULL)
rl_initialize();
+ history_offset = history_length;
}
@@ -531,7 +563,7 @@
}
if ('0' <= cmd[idx] && cmd[idx] <= '9') {
- HIST_ENTRY *rl_he;
+ HIST_ENTRY *he;
num = 0;
while (cmd[idx] && '0' <= cmd[idx] && cmd[idx] <= '9') {
@@ -539,13 +571,13 @@
idx++;
}
if (sign)
- num = history_length - num + 1;
+ num = history_length - num + history_base;
- if (!(rl_he = history_get(num)))
+ if (!(he = history_get(num)))
return NULL;
*cindex = idx;
- return rl_he->line;
+ return he->line;
}
sub = 0;
if (cmd[idx] == '?') {
@@ -631,7 +663,7 @@
* returns 0 if data was not modified, 1 if it was and 2 if the string
* should be only printed and not executed; in case of error,
* returns -1 and *result points to NULL
- * it's callers responsibility to free() string returned in *result
+ * it's the caller's responsibility to free() the string returned in *result
*/
static int
_history_expand_command(const char *command, size_t offs, size_t cmdlen,
@@ -945,7 +977,8 @@
for (; str[j]; j++) {
if (str[j] == '\\' &&
str[j + 1] == history_expansion_char) {
- (void)strcpy(&str[j], &str[j + 1]);
+ len = strlen(&str[j + 1]) + 1;
+ memmove(&str[j], &str[j + 1], len);
continue;
}
if (!loop_again) {
@@ -1133,12 +1166,22 @@
stifle_history(int max)
{
HistEvent ev;
+ HIST_ENTRY *he;
if (h == NULL || e == NULL)
rl_initialize();
- if (history(h, &ev, H_SETSIZE, max) == 0)
+ if (history(h, &ev, H_SETSIZE, max) == 0) {
max_input_history = max;
+ if (history_length > max)
+ history_base = history_length - max;
+ while (history_length > max) {
+ he = remove_history(0);
+ el_free(he->data);
+ el_free((void *)(unsigned long)he->line);
+ el_free(he);
+ }
+ }
}
@@ -1316,8 +1359,14 @@
rl_initialize();
if (filename == NULL && (filename = _default_history_file()) == NULL)
return errno;
- return history(h, &ev, H_LOAD, filename) == -1 ?
- (errno ? errno : EINVAL) : 0;
+ errno = 0;
+ if (history(h, &ev, H_LOAD, filename) == -1)
+ return errno ? errno : EINVAL;
+ if (history(h, &ev, H_GETSIZE) == 0)
+ history_length = ev.num;
+ if (history_length < 0)
+ return EINVAL;
+ return 0;
}
@@ -1337,6 +1386,28 @@
(errno ? errno : EINVAL) : 0;
}
+int
+append_history(int n, const char *filename)
+{
+ HistEvent ev;
+ FILE *fp;
+
+ if (h == NULL || e == NULL)
+ rl_initialize();
+ if (filename == NULL && (filename = _default_history_file()) == NULL)
+ return errno;
+
+ if ((fp = fopen(filename, "a")) == NULL)
+ return errno;
+
+ if (history(h, &ev, H_NSAVE_FP, (size_t)n, fp) == -1) {
+ int serrno = errno ? errno : EINVAL;
+ fclose(fp);
+ return serrno;
+ }
+ fclose(fp);
+ return 0;
+}
/*
* returns history ``num''th event
@@ -1353,25 +1424,37 @@
if (h == NULL || e == NULL)
rl_initialize();
+ if (num < history_base)
+ return NULL;
+
/* save current position */
if (history(h, &ev, H_CURR) != 0)
return NULL;
curr_num = ev.num;
- /* start from the oldest */
- if (history(h, &ev, H_LAST) != 0)
- return NULL; /* error */
+ /*
+ * use H_DELDATA to set to nth history (without delete) by passing
+ * (void **)-1 -- as in history_set_pos
+ */
+ if (history(h, &ev, H_DELDATA, num - history_base, (void **)-1) != 0)
+ goto out;
- /* look forwards for event matching specified offset */
- if (history(h, &ev, H_NEXT_EVDATA, num, &she.data))
- return NULL;
-
+ /* get current entry */
+ if (history(h, &ev, H_CURR) != 0)
+ goto out;
+ if (history(h, &ev, H_NEXT_EVDATA, ev.num, &she.data) != 0)
+ goto out;
she.line = ev.str;
/* restore pointer to where it was */
(void)history(h, &ev, H_SET, curr_num);
return &she;
+
+out:
+ /* restore pointer to where it was */
+ (void)history(h, &ev, H_SET, curr_num);
+ return NULL;
}
@@ -1383,17 +1466,18 @@
{
HistEvent ev;
- if (line == NULL)
- return 0;
-
if (h == NULL || e == NULL)
rl_initialize();
- (void)history(h, &ev, H_ENTER, line);
- if (history(h, &ev, H_GETSIZE) == 0)
- history_length = ev.num;
+ if (history(h, &ev, H_ENTER, line) == -1)
+ return 0;
- return !(history_length > 0); /* return 0 if all is okay */
+ (void)history(h, &ev, H_GETSIZE);
+ if (ev.num == history_length)
+ history_base++;
+ else
+ history_length = ev.num;
+ return 0;
}
@@ -1479,8 +1563,11 @@
{
HistEvent ev;
+ if (h == NULL || e == NULL)
+ rl_initialize();
+
(void)history(h, &ev, H_CLEAR);
- history_length = 0;
+ history_offset = history_length = 0;
}
@@ -1490,21 +1577,43 @@
int
where_history(void)
{
- HistEvent ev;
- int curr_num, off;
-
- if (history(h, &ev, H_CURR) != 0)
- return 0;
- curr_num = ev.num;
-
- (void)history(h, &ev, H_FIRST);
- off = 1;
- while (ev.num != curr_num && history(h, &ev, H_NEXT) == 0)
- off++;
-
- return off;
+ return history_offset;
}
+static HIST_ENTRY **_history_listp;
+static HIST_ENTRY *_history_list;
+
+HIST_ENTRY **
+history_list(void)
+{
+ HistEvent ev;
+ HIST_ENTRY **nlp, *nl;
+ int i;
+
+ if (history(h, &ev, H_LAST) != 0)
+ return NULL;
+
+ if ((nlp = el_realloc(_history_listp,
+ ((size_t)history_length + 1) * sizeof(*nlp))) == NULL)
+ return NULL;
+ _history_listp = nlp;
+
+ if ((nl = el_realloc(_history_list,
+ (size_t)history_length * sizeof(*nl))) == NULL)
+ return NULL;
+ _history_list = nl;
+
+ i = 0;
+ do {
+ _history_listp[i] = &_history_list[i];
+ _history_list[i].line = ev.str;
+ _history_list[i].data = NULL;
+ if (i++ == history_length)
+ abort();
+ } while (history(h, &ev, H_PREV) == 0);
+ _history_listp[i] = NULL;
+ return _history_listp;
+}
/*
* returns current history event or NULL if there is no such event
@@ -1512,8 +1621,14 @@
HIST_ENTRY *
current_history(void)
{
+ HistEvent ev;
- return _move_history(H_CURR);
+ if (history(h, &ev, H_PREV_EVENT, history_offset + 1) != 0)
+ return NULL;
+
+ rl_he.line = ev.str;
+ rl_he.data = NULL;
+ return &rl_he;
}
@@ -1550,35 +1665,31 @@
int
history_set_pos(int pos)
{
- HistEvent ev;
- int curr_num;
-
if (pos >= history_length || pos < 0)
- return -1;
+ return 0;
- (void)history(h, &ev, H_CURR);
- curr_num = ev.num;
-
- /*
- * use H_DELDATA to set to nth history (without delete) by passing
- * (void **)-1
- */
- if (history(h, &ev, H_DELDATA, pos, (void **)-1)) {
- (void)history(h, &ev, H_SET, curr_num);
- return -1;
- }
- return 0;
+ history_offset = pos;
+ return 1;
}
/*
* returns previous event in history and shifts pointer accordingly
+ * Note that readline and editline define directions in opposite ways.
*/
HIST_ENTRY *
previous_history(void)
{
+ HistEvent ev;
- return _move_history(H_PREV);
+ if (history_offset == 0)
+ return NULL;
+
+ if (history(h, &ev, H_LAST) != 0)
+ return NULL;
+
+ history_offset--;
+ return current_history();
}
@@ -1588,8 +1699,16 @@
HIST_ENTRY *
next_history(void)
{
+ HistEvent ev;
- return _move_history(H_NEXT);
+ if (history_offset >= history_length)
+ return NULL;
+
+ if (history(h, &ev, H_LAST) != 0)
+ return NULL;
+
+ history_offset++;
+ return current_history();
}
@@ -1650,7 +1769,7 @@
return -1;
curr_num = ev.num;
- if (history_set_pos(off) != 0 || history(h, &ev, H_CURR) != 0)
+ if (!history_set_pos(off) || history(h, &ev, H_CURR) != 0)
return -1;
for (;;) {
@@ -1688,7 +1807,7 @@
* which starts with supplied text
* text contains a partial username preceded by random character
* (usually '~'); state resets search from start (??? should we do that anyway)
- * it's callers responsibility to free returned value
+ * it's the caller's responsibility to free the returned value
*/
char *
username_completion_function(const char *text, int state)
@@ -1729,18 +1848,6 @@
return CC_NORM;
}
-/*
- * Display list of strings in columnar format on readline's output stream.
- * 'matches' is list of strings, 'len' is number of strings in 'matches',
- * 'max' is maximum length of string in 'matches'.
- */
-void
-rl_display_match_list(char **matches, int len, int max)
-{
-
- fn_display_match_list(e, matches, (size_t)len, (size_t)max);
-}
-
static const char *
/*ARGSUSED*/
_rl_completion_append_character_function(const char *dummy
@@ -1754,16 +1861,27 @@
/*
+ * Display list of strings in columnar format on readline's output stream.
+ * 'matches' is list of strings, 'len' is number of strings in 'matches',
+ * 'max' is maximum length of string in 'matches'.
+ */
+void
+rl_display_match_list(char **matches, int len, int max)
+{
+
+ fn_display_match_list(e, matches, (size_t)len, (size_t)max,
+ _rl_completion_append_character_function);
+}
+
+/*
* complete word at current point
*/
/* ARGSUSED */
int
rl_complete(int ignore __attribute__((__unused__)), int invoking_key)
{
-#ifdef WIDECHAR
static ct_buffer_t wbreak_conv, sprefix_conv;
-#endif
- char *breakchars;
+ const char *breakchars;
if (h == NULL || e == NULL)
rl_initialize();
@@ -1781,9 +1899,11 @@
else
breakchars = rl_basic_word_break_characters;
+ _rl_update_pos();
+
/* Just look at how many global variables modify this operation! */
return fn_complete(e,
- (CPFunction *)rl_completion_entry_function,
+ (rl_compentry_func_t *)rl_completion_entry_function,
rl_attempted_completion_function,
ct_decode_string(rl_basic_word_break_characters, &wbreak_conv),
ct_decode_string(breakchars, &sprefix_conv),
@@ -1847,13 +1967,14 @@
* reset the terminal
*/
/* ARGSUSED */
-void
+int
rl_reset_terminal(const char *p __attribute__((__unused__)))
{
if (h == NULL || e == NULL)
rl_initialize();
el_reset(e);
+ return 0;
}
@@ -1912,7 +2033,7 @@
_rl_update_pos();
- (*map[c])(NULL, c);
+ (*map[c])(1, c);
/* If rl_done was set by the above call, deal with it here */
if (rl_done)
@@ -1922,7 +2043,7 @@
}
int
-rl_add_defun(const char *name, Function *fun, int c)
+rl_add_defun(const char *name, rl_command_func_t *fun, int c)
{
char dest[8];
if ((size_t)c >= sizeof(map) / sizeof(map[0]) || c < 0)
@@ -1951,17 +2072,17 @@
if (done && rl_linefunc != NULL) {
el_set(e, EL_UNBUFFERED, 0);
if (done == 2) {
- if ((wbuf = strdup(buf)) != NULL)
- wbuf[count] = '\0';
+ if ((wbuf = strdup(buf)) != NULL)
+ wbuf[count] = '\0';
} else
wbuf = NULL;
(*(void (*)(const char *))rl_linefunc)(wbuf);
- //el_set(e, EL_UNBUFFERED, 1);
+ el_set(e, EL_UNBUFFERED, 1);
}
}
-void
-rl_callback_handler_install(const char *prompt, VCPFunction *linefunc)
+void
+rl_callback_handler_install(const char *prompt, rl_vcpfunc_t *linefunc)
{
if (e == NULL) {
rl_initialize();
@@ -1969,13 +2090,14 @@
(void)rl_set_prompt(prompt);
rl_linefunc = linefunc;
el_set(e, EL_UNBUFFERED, 1);
-}
+}
-void
+void
rl_callback_handler_remove(void)
{
- el_set(e, EL_UNBUFFERED, 0);
rl_linefunc = NULL;
+ el_end(e);
+ e = NULL;
}
void
@@ -2041,7 +2163,7 @@
return el_set(e, EL_BIND, "", var, value, NULL) == -1 ? 1 : 0;
}
-void
+int
rl_stuff_char(int c)
{
char buf[2];
@@ -2049,15 +2171,18 @@
buf[0] = (char)c;
buf[1] = '\0';
el_insertstr(e, buf);
+ return 1;
}
static int
-_rl_event_read_char(EditLine *el, char *cp)
+_rl_event_read_char(EditLine *el, wchar_t *wc)
{
+ char ch;
int n;
ssize_t num_read = 0;
- *cp = '\0';
+ ch = '\0';
+ *wc = L'\0';
while (rl_event_hook) {
(*rl_event_hook)();
@@ -2066,7 +2191,7 @@
if (ioctl(el->el_infd, FIONREAD, &n) < 0)
return -1;
if (n)
- num_read = read(el->el_infd, cp, (size_t)1);
+ num_read = read(el->el_infd, &ch, (size_t)1);
else
num_read = 0;
#elif defined(F_SETFL) && defined(O_NDELAY)
@@ -2074,12 +2199,12 @@
return -1;
if (fcntl(el->el_infd, F_SETFL, n|O_NDELAY) < 0)
return -1;
- num_read = read(el->el_infd, cp, 1);
+ num_read = read(el->el_infd, &ch, 1);
if (fcntl(el->el_infd, F_SETFL, n))
return -1;
#else
/* not non-blocking, but what you gonna do? */
- num_read = read(el->el_infd, cp, 1);
+ num_read = read(el->el_infd, &ch, 1);
return -1;
#endif
@@ -2091,6 +2216,7 @@
}
if (!rl_event_hook)
el_set(el, EL_GETCFN, EL_BUILTIN_GETCFN);
+ *wc = (wchar_t)ch;
return (int)num_read;
}
@@ -2153,7 +2279,7 @@
}
qsort(&list[1], len - 1, sizeof(*list),
(int (*)(const void *, const void *)) strcmp);
- min = SIZE_T_MAX;
+ min = SIZE_MAX;
for (i = 1, a = list[i]; i < len - 1; i++, a = b) {
b = list[i + 1];
for (j = 0; a[j] && a[j] == b[j]; j++)
@@ -2171,7 +2297,7 @@
list[0][min] = '\0';
}
return list;
-
+
out:
el_free(list);
return NULL;
@@ -2275,3 +2401,32 @@
rl_free_line_state(void)
{
}
+
+int
+/*ARGSUSED*/
+rl_set_keyboard_input_timeout(int u __attribute__((__unused__)))
+{
+ return 0;
+}
+
+void
+rl_resize_terminal(void)
+{
+ el_resize(e);
+}
+
+void
+rl_reset_after_signal(void)
+{
+ if (rl_prep_term_function)
+ (*rl_prep_term_function)();
+}
+
+void
+rl_echo_signal_char(int sig)
+{
+ int c = tty_get_signal_character(e, sig);
+ if (c == -1)
+ return;
+ re_putc(e, c, 0);
+}
diff --git a/src/refresh.c b/src/refresh.c
index 3e1176e..584eec6 100644
--- a/src/refresh.c
+++ b/src/refresh.c
@@ -1,4 +1,4 @@
-/* $NetBSD: refresh.c,v 1.37 2011/07/29 23:44:45 christos Exp $ */
+/* $NetBSD: refresh.c,v 1.56 2019/01/04 03:03:44 uwe Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -37,7 +37,7 @@
#if 0
static char sccsid[] = "@(#)refresh.c 8.1 (Berkeley) 6/4/93";
#else
-__RCSID("$NetBSD: refresh.c,v 1.37 2011/07/29 23:44:45 christos Exp $");
+__RCSID("$NetBSD: refresh.c,v 1.56 2019/01/04 03:03:44 uwe Exp $");
#endif
#endif /* not lint && not SCCSID */
@@ -45,26 +45,25 @@
* refresh.c: Lower level screen refreshing functions
*/
#include <stdio.h>
-#include <ctype.h>
-#include <unistd.h>
#include <string.h>
+#include <unistd.h>
#include "el.h"
-private void re_nextline(EditLine *);
-private void re_addc(EditLine *, Int);
-private void re_update_line(EditLine *, Char *, Char *, int);
-private void re_insert (EditLine *, Char *, int, int, Char *, int);
-private void re_delete(EditLine *, Char *, int, int, int);
-private void re_fastputc(EditLine *, Int);
-private void re_clear_eol(EditLine *, int, int, int);
-private void re__strncopy(Char *, Char *, size_t);
-private void re__copy_and_pad(Char *, const Char *, size_t);
+static void re_nextline(EditLine *);
+static void re_addc(EditLine *, wint_t);
+static void re_update_line(EditLine *, wchar_t *, wchar_t *, int);
+static void re_insert (EditLine *, wchar_t *, int, int, wchar_t *, int);
+static void re_delete(EditLine *, wchar_t *, int, int, int);
+static void re_fastputc(EditLine *, wint_t);
+static void re_clear_eol(EditLine *, int, int, int);
+static void re__strncopy(wchar_t *, wchar_t *, size_t);
+static void re__copy_and_pad(wchar_t *, const wchar_t *, size_t);
#ifdef DEBUG_REFRESH
-private void re_printstr(EditLine *, const char *, char *, char *);
+static void re_printstr(EditLine *, const char *, wchar_t *, wchar_t *);
#define __F el->el_errfile
-#define ELRE_ASSERT(a, b, c) do \
+#define ELRE_ASSERT(a, b, c) do \
if (/*CONSTCOND*/ a) { \
(void) fprintf b; \
c; \
@@ -75,8 +74,8 @@
/* re_printstr():
* Print a string on the debugging pty
*/
-private void
-re_printstr(EditLine *el, const char *str, char *f, char *t)
+static void
+re_printstr(EditLine *el, const char *str, wchar_t *f, wchar_t *t)
{
ELRE_DEBUG(1, (__F, "%s:\"", str));
@@ -92,7 +91,7 @@
/* re_nextline():
* Move to the next line or scroll
*/
-private void
+static void
re_nextline(EditLine *el)
{
el->el_refresh.r_cursor.h = 0; /* reset it. */
@@ -105,12 +104,12 @@
*/
if (el->el_refresh.r_cursor.v + 1 >= el->el_terminal.t_size.v) {
int i, lins = el->el_terminal.t_size.v;
- Char *firstline = el->el_vdisplay[0];
+ wchar_t *firstline = el->el_vdisplay[0];
for(i = 1; i < lins; i++)
el->el_vdisplay[i - 1] = el->el_vdisplay[i];
- firstline[0] = '\0'; /* empty the string */
+ firstline[0] = '\0'; /* empty the string */
el->el_vdisplay[i - 1] = firstline;
} else
el->el_refresh.r_cursor.v++;
@@ -124,10 +123,10 @@
/* re_addc():
* Draw c, expanding tabs, control chars etc.
*/
-private void
-re_addc(EditLine *el, Int c)
+static void
+re_addc(EditLine *el, wint_t c)
{
- switch (ct_chr_class((Char)c)) {
+ switch (ct_chr_class(c)) {
case CHTYPE_TAB: /* expand the tab */
for (;;) {
re_putc(el, ' ', 1);
@@ -146,9 +145,9 @@
re_putc(el, c, 1);
break;
default: {
- Char visbuf[VISUAL_WIDTH_MAX];
+ wchar_t visbuf[VISUAL_WIDTH_MAX];
ssize_t i, n =
- ct_visual_char(visbuf, VISUAL_WIDTH_MAX, (Char)c);
+ ct_visual_char(visbuf, VISUAL_WIDTH_MAX, c);
for (i = 0; n-- > 0; ++i)
re_putc(el, visbuf[i], 1);
break;
@@ -156,35 +155,66 @@
}
}
+/* re_putliteral():
+ * Place the literal string given
+ */
+libedit_private void
+re_putliteral(EditLine *el, const wchar_t *begin, const wchar_t *end)
+{
+ coord_t *cur = &el->el_refresh.r_cursor;
+ wint_t c;
+ int sizeh = el->el_terminal.t_size.h;
+ int i, w;
+
+ c = literal_add(el, begin, end, &w);
+ if (c == 0 || w <= 0)
+ return;
+ el->el_vdisplay[cur->v][cur->h] = c;
+
+ i = w;
+ if (i > sizeh - cur->h) /* avoid overflow */
+ i = sizeh - cur->h;
+ while (--i > 0)
+ el->el_vdisplay[cur->v][cur->h + i] = MB_FILL_CHAR;
+
+ cur->h += w;
+ if (cur->h >= sizeh) {
+ /* assure end of line */
+ el->el_vdisplay[cur->v][sizeh] = '\0';
+ re_nextline(el);
+ }
+}
/* re_putc():
* Draw the character given
*/
-protected void
-re_putc(EditLine *el, Int c, int shift)
+libedit_private void
+re_putc(EditLine *el, wint_t c, int shift)
{
- int i, w = Width(c);
- ELRE_DEBUG(1, (__F, "printing %5x '%c'\r\n", c, c));
+ coord_t *cur = &el->el_refresh.r_cursor;
+ int i, w = wcwidth(c);
+ int sizeh = el->el_terminal.t_size.h;
- while (shift && (el->el_refresh.r_cursor.h + w > el->el_terminal.t_size.h))
+ ELRE_DEBUG(1, (__F, "printing %5x '%lc'\r\n", c, c));
+ if (w == -1)
+ w = 0;
+
+ while (shift && (cur->h + w > sizeh))
re_putc(el, ' ', 1);
- el->el_vdisplay[el->el_refresh.r_cursor.v]
- [el->el_refresh.r_cursor.h] = c;
+ el->el_vdisplay[cur->v][cur->h] = c;
/* assumes !shift is only used for single-column chars */
i = w;
while (--i > 0)
- el->el_vdisplay[el->el_refresh.r_cursor.v]
- [el->el_refresh.r_cursor.h + i] = MB_FILL_CHAR;
+ el->el_vdisplay[cur->v][cur->h + i] = MB_FILL_CHAR;
if (!shift)
return;
- el->el_refresh.r_cursor.h += w; /* advance to next place */
- if (el->el_refresh.r_cursor.h >= el->el_terminal.t_size.h) {
+ cur->h += w; /* advance to next place */
+ if (cur->h >= sizeh) {
/* assure end of line */
- el->el_vdisplay[el->el_refresh.r_cursor.v][el->el_terminal.t_size.h]
- = '\0';
+ el->el_vdisplay[cur->v][sizeh] = '\0';
re_nextline(el);
}
}
@@ -192,27 +222,30 @@
/* re_refresh():
* draws the new virtual screen image from the current input
- * line, then goes line-by-line changing the real image to the new
+ * line, then goes line-by-line changing the real image to the new
* virtual image. The routine to re-draw a line can be replaced
* easily in hopes of a smarter one being placed there.
*/
-protected void
+libedit_private void
re_refresh(EditLine *el)
{
int i, rhdiff;
- Char *cp, *st;
+ wchar_t *cp, *st;
coord_t cur;
#ifdef notyet
size_t termsz;
#endif
- ELRE_DEBUG(1, (__F, "el->el_line.buffer = :%s:\r\n",
+ ELRE_DEBUG(1, (__F, "el->el_line.buffer = :%ls:\r\n",
el->el_line.buffer));
+ literal_clear(el);
/* reset the Drawing cursor */
el->el_refresh.r_cursor.h = 0;
el->el_refresh.r_cursor.v = 0;
+ terminal_move_to_char(el, 0);
+
/* temporarily draw rprompt to calculate its size */
prompt_print(el, EL_RPROMPT);
@@ -252,7 +285,7 @@
for (cp = st; cp < el->el_line.lastchar; cp++) {
if (cp == el->el_line.cursor) {
- int w = Width(*cp);
+ int w = wcwidth(*cp);
/* save for later */
cur.h = el->el_refresh.r_cursor.h;
cur.v = el->el_refresh.r_cursor.v;
@@ -294,7 +327,8 @@
ELRE_DEBUG(1, (__F,
"term.h=%d vcur.h=%d vcur.v=%d vdisplay[0]=\r\n:%80.80s:\r\n",
el->el_terminal.t_size.h, el->el_refresh.r_cursor.h,
- el->el_refresh.r_cursor.v, ct_encode_string(el->el_vdisplay[0])));
+ el->el_refresh.r_cursor.v, ct_encode_string(el->el_vdisplay[0],
+ &el->el_scratch)));
ELRE_DEBUG(1, (__F, "updating %d lines.\r\n", el->el_refresh.r_newcv));
for (i = 0; i <= el->el_refresh.r_newcv; i++) {
@@ -319,10 +353,10 @@
for (; i <= el->el_refresh.r_oldcv; i++) {
terminal_move_to_line(el, i);
terminal_move_to_char(el, 0);
- /* This Strlen should be safe even with MB_FILL_CHARs */
- terminal_clear_EOL(el, (int) Strlen(el->el_display[i]));
+ /* This wcslen should be safe even with MB_FILL_CHARs */
+ terminal_clear_EOL(el, (int) wcslen(el->el_display[i]));
#ifdef DEBUG_REFRESH
- terminal_overwrite(el, "C\b", (size_t)2);
+ terminal_overwrite(el, L"C\b", 2);
#endif /* DEBUG_REFRESH */
el->el_display[i][0] = '\0';
}
@@ -340,7 +374,7 @@
/* re_goto_bottom():
* used to go to last used screen line
*/
-protected void
+libedit_private void
re_goto_bottom(EditLine *el)
{
@@ -355,12 +389,12 @@
* insert num characters of s into d (in front of the character)
* at dat, maximum length of d is dlen
*/
-private void
+static void
/*ARGSUSED*/
re_insert(EditLine *el __attribute__((__unused__)),
- Char *d, int dat, int dlen, Char *s, int num)
+ wchar_t *d, int dat, int dlen, wchar_t *s, int num)
{
- Char *a, *b;
+ wchar_t *a, *b;
if (num <= 0)
return;
@@ -369,8 +403,9 @@
ELRE_DEBUG(1,
(__F, "re_insert() starting: %d at %d max %d, d == \"%s\"\n",
- num, dat, dlen, ct_encode_string(d)));
- ELRE_DEBUG(1, (__F, "s == \"%s\"\n", ct_encode_string(s)));
+ num, dat, dlen, ct_encode_string(d, &el->el_scratch)));
+ ELRE_DEBUG(1, (__F, "s == \"%s\"\n", ct_encode_string(s,
+ &el->el_scratch)));
/* open up the space for num chars */
if (num > 0) {
@@ -383,8 +418,9 @@
ELRE_DEBUG(1, (__F,
"re_insert() after insert: %d at %d max %d, d == \"%s\"\n",
- num, dat, dlen, ct_encode_string(d)));
- ELRE_DEBUG(1, (__F, "s == \"%s\"\n", ct_encode_string(s)));
+ num, dat, dlen, ct_encode_string(d, &el->el_scratch)));
+ ELRE_DEBUG(1, (__F, "s == \"%s\"\n", ct_encode_string(s,
+ &el->el_scratch)));
/* copy the characters */
for (a = d + dat; (a < d + dlen) && (num > 0); num--)
@@ -404,12 +440,12 @@
/* re_delete():
* delete num characters d at dat, maximum length of d is dlen
*/
-private void
+static void
/*ARGSUSED*/
re_delete(EditLine *el __attribute__((__unused__)),
- Char *d, int dat, int dlen, int num)
+ wchar_t *d, int dat, int dlen, int num)
{
- Char *a, *b;
+ wchar_t *a, *b;
if (num <= 0)
return;
@@ -419,7 +455,7 @@
}
ELRE_DEBUG(1,
(__F, "re_delete() starting: %d at %d max %d, d == \"%s\"\n",
- num, dat, dlen, ct_encode_string(d)));
+ num, dat, dlen, ct_encode_string(d, &el->el_scratch)));
/* open up the space for num chars */
if (num > 0) {
@@ -431,15 +467,15 @@
}
ELRE_DEBUG(1,
(__F, "re_delete() after delete: %d at %d max %d, d == \"%s\"\n",
- num, dat, dlen, ct_encode_string(d)));
+ num, dat, dlen, ct_encode_string(d, &el->el_scratch)));
}
/* re__strncopy():
* Like strncpy without padding.
*/
-private void
-re__strncopy(Char *a, Char *b, size_t n)
+static void
+re__strncopy(wchar_t *a, wchar_t *b, size_t n)
{
while (n-- && *b)
@@ -451,9 +487,9 @@
* in order to make sure that we have cleared the previous contents of
* the line. fx and sx is the number of characters inserted or deleted
* in the first or second diff, diff is the difference between the
- * number of characters between the new and old line.
+ * number of characters between the new and old line.
*/
-private void
+static void
re_clear_eol(EditLine *el, int fx, int sx, int diff)
{
@@ -497,12 +533,12 @@
*/
#define MIN_END_KEEP 4
-private void
-re_update_line(EditLine *el, Char *old, Char *new, int i)
+static void
+re_update_line(EditLine *el, wchar_t *old, wchar_t *new, int i)
{
- Char *o, *n, *p, c;
- Char *ofd, *ols, *oe, *nfd, *nls, *ne;
- Char *osb, *ose, *nsb, *nse;
+ wchar_t *o, *n, *p, c;
+ wchar_t *ofd, *ols, *oe, *nfd, *nls, *ne;
+ wchar_t *osb, *ose, *nsb, *nse;
int fx, sx;
size_t len;
@@ -559,7 +595,7 @@
nls = ++n;
/*
- * find same begining and same end
+ * find same beginning and same end
*/
osb = ols;
nsb = nls;
@@ -689,9 +725,9 @@
sx = (int)((nls - nse) - (ols - ose));
ELRE_DEBUG(1, (__F, "fx %d, sx %d\n", fx, sx));
- ELRE_DEBUG(1, (__F, "ofd %d, osb %d, ose %d, ols %d, oe %d\n",
+ ELRE_DEBUG(1, (__F, "ofd %td, osb %td, ose %td, ols %td, oe %td\n",
ofd - old, osb - old, ose - old, ols - old, oe - old));
- ELRE_DEBUG(1, (__F, "nfd %d, nsb %d, nse %d, nls %d, ne %d\n",
+ ELRE_DEBUG(1, (__F, "nfd %td, nsb %td, nse %td, nls %td, ne %td\n",
nfd - new, nsb - new, nse - new, nls - new, ne - new));
ELRE_DEBUG(1, (__F,
"xxx-xxx:\"00000000001111111111222222222233333333334\"\r\n"));
@@ -765,7 +801,7 @@
if ((nsb != nfd) && fx > 0 &&
((p - old) + fx <= el->el_terminal.t_size.h)) {
ELRE_DEBUG(1,
- (__F, "first diff insert at %d...\r\n", nfd - new));
+ (__F, "first diff insert at %td...\r\n", nfd - new));
/*
* Move to the first char to insert, where the first diff is.
*/
@@ -804,7 +840,7 @@
}
} else if (fx < 0) {
ELRE_DEBUG(1,
- (__F, "first diff delete at %d...\r\n", ofd - old));
+ (__F, "first diff delete at %td...\r\n", ofd - old));
/*
* move to the first char to delete where the first diff is
*/
@@ -851,7 +887,7 @@
if (sx < 0 && (ose - old) + fx < el->el_terminal.t_size.h) {
ELRE_DEBUG(1, (__F,
- "second diff delete at %d...\r\n", (ose - old) + fx));
+ "second diff delete at %td...\r\n", (ose - old) + fx));
/*
* Check if we have stuff to delete
*/
@@ -889,7 +925,7 @@
* if we have a first insert AND WE HAVEN'T ALREADY DONE IT...
*/
if ((nsb != nfd) && (osb - ofd) <= (nsb - nfd) && (fx == 0)) {
- ELRE_DEBUG(1, (__F, "late first diff insert at %d...\r\n",
+ ELRE_DEBUG(1, (__F, "late first diff insert at %td...\r\n",
nfd - new));
terminal_move_to_char(el, (int)(nfd - new));
@@ -967,8 +1003,8 @@
/* re__copy_and_pad():
* Copy string and pad with spaces
*/
-private void
-re__copy_and_pad(Char *dst, const Char *src, size_t width)
+static void
+re__copy_and_pad(wchar_t *dst, const wchar_t *src, size_t width)
{
size_t i;
@@ -988,10 +1024,10 @@
/* re_refresh_cursor():
* Move to the new cursor position
*/
-protected void
+libedit_private void
re_refresh_cursor(EditLine *el)
{
- Char *cp;
+ wchar_t *cp;
int h, v, th, w;
if (el->el_line.cursor >= el->el_line.lastchar) {
@@ -1019,7 +1055,7 @@
continue;
break;
default:
- w = Width(*cp);
+ w = wcwidth(*cp);
if (w > 1 && h + w > th) { /* won't fit on line */
h = 0;
v++;
@@ -1035,7 +1071,7 @@
}
/* if we have a next character, and it's a doublewidth one, we need to
* check whether we need to linebreak for it to fit */
- if (cp < el->el_line.lastchar && (w = Width(*cp)) > 1)
+ if (cp < el->el_line.lastchar && (w = wcwidth(*cp)) > 1)
if (h + w > th) {
h = 0;
v++;
@@ -1051,10 +1087,13 @@
/* re_fastputc():
* Add a character fast.
*/
-private void
-re_fastputc(EditLine *el, Int c)
+static void
+re_fastputc(EditLine *el, wint_t c)
{
- int w = Width((Char)c);
+ wchar_t *lastline;
+ int w;
+
+ w = wcwidth(c);
while (w > 1 && el->el_cursor.h + w > el->el_terminal.t_size.h)
re_fastputc(el, ' ');
@@ -1076,17 +1115,18 @@
*/
if (el->el_cursor.v + 1 >= el->el_terminal.t_size.v) {
int i, lins = el->el_terminal.t_size.v;
- Char *firstline = el->el_display[0];
-
+
+ lastline = el->el_display[0];
for(i = 1; i < lins; i++)
el->el_display[i - 1] = el->el_display[i];
- re__copy_and_pad(firstline, STR(""), (size_t)0);
- el->el_display[i - 1] = firstline;
+ el->el_display[i - 1] = lastline;
} else {
el->el_cursor.v++;
- el->el_refresh.r_oldcv++;
+ lastline = el->el_display[++el->el_refresh.r_oldcv];
}
+ re__copy_and_pad(lastline, L"", (size_t)el->el_terminal.t_size.h);
+
if (EL_HAS_AUTO_MARGINS) {
if (EL_HAS_MAGIC_MARGINS) {
terminal__putc(el, ' ');
@@ -1104,10 +1144,10 @@
* we added just one char, handle it fast.
* Assumes that screen cursor == real cursor
*/
-protected void
+libedit_private void
re_fastaddc(EditLine *el)
{
- Char c;
+ wchar_t c;
int rhdiff;
c = el->el_line.cursor[-1];
@@ -1131,9 +1171,9 @@
break;
case CHTYPE_ASCIICTL:
case CHTYPE_NONPRINT: {
- Char visbuf[VISUAL_WIDTH_MAX];
+ wchar_t visbuf[VISUAL_WIDTH_MAX];
ssize_t i, n =
- ct_visual_char(visbuf, VISUAL_WIDTH_MAX, (Char)c);
+ ct_visual_char(visbuf, VISUAL_WIDTH_MAX, c);
for (i = 0; n-- > 0; ++i)
re_fastputc(el, visbuf[i]);
break;
@@ -1146,7 +1186,7 @@
/* re_clear_display():
* clear the screen buffers so that new new prompt starts fresh.
*/
-protected void
+libedit_private void
re_clear_display(EditLine *el)
{
int i;
@@ -1162,7 +1202,7 @@
/* re_clear_lines():
* Make sure all lines are *really* blank
*/
-protected void
+libedit_private void
re_clear_lines(EditLine *el)
{
diff --git a/src/refresh.h b/src/refresh.h
index f80be46..22e4ccb 100644
--- a/src/refresh.h
+++ b/src/refresh.h
@@ -1,4 +1,4 @@
-/* $NetBSD: refresh.h,v 1.6 2009/12/30 22:37:40 christos Exp $ */
+/* $NetBSD: refresh.h,v 1.11 2017/06/27 23:23:48 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -40,20 +40,20 @@
#ifndef _h_el_refresh
#define _h_el_refresh
-#include "histedit.h"
-
typedef struct {
coord_t r_cursor; /* Refresh cursor position */
int r_oldcv; /* Vertical locations */
int r_newcv;
} el_refresh_t;
-protected void re_putc(EditLine *, Int, int);
-protected void re_clear_lines(EditLine *);
-protected void re_clear_display(EditLine *);
-protected void re_refresh(EditLine *);
-protected void re_refresh_cursor(EditLine *);
-protected void re_fastaddc(EditLine *);
-protected void re_goto_bottom(EditLine *);
+libedit_private void re_putc(EditLine *, wint_t, int);
+libedit_private void re_putliteral(EditLine *, const wchar_t *,
+ const wchar_t *);
+libedit_private void re_clear_lines(EditLine *);
+libedit_private void re_clear_display(EditLine *);
+libedit_private void re_refresh(EditLine *);
+libedit_private void re_refresh_cursor(EditLine *);
+libedit_private void re_fastaddc(EditLine *);
+libedit_private void re_goto_bottom(EditLine *);
#endif /* _h_el_refresh */
diff --git a/src/search.c b/src/search.c
index 9ed7760..aec87fe 100644
--- a/src/search.c
+++ b/src/search.c
@@ -1,4 +1,4 @@
-/* $NetBSD: search.c,v 1.30 2011/10/04 15:27:04 christos Exp $ */
+/* $NetBSD: search.c,v 1.48 2018/02/26 17:36:14 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -37,7 +37,7 @@
#if 0
static char sccsid[] = "@(#)search.c 8.1 (Berkeley) 6/4/93";
#else
-__RCSID("$NetBSD: search.c,v 1.30 2011/10/04 15:27:04 christos Exp $");
+__RCSID("$NetBSD: search.c,v 1.48 2018/02/26 17:36:14 christos Exp $");
#endif
#endif /* not lint && not SCCSID */
@@ -46,12 +46,16 @@
*/
#include <stdlib.h>
#include <sys/types.h>
+#include <string.h>
#if defined(REGEX)
#include <regex.h>
#elif defined(REGEXP)
#include <regexp.h>
#endif
+
#include "el.h"
+#include "common.h"
+#include "fcns.h"
/*
* Adjust cursor in vi mode to include the character under it
@@ -63,7 +67,7 @@
/* search_init():
* Initialize the search stuff
*/
-protected int
+libedit_private int
search_init(EditLine *el)
{
@@ -71,9 +75,10 @@
sizeof(*el->el_search.patbuf));
if (el->el_search.patbuf == NULL)
return -1;
+ el->el_search.patbuf[0] = L'\0';
el->el_search.patlen = 0;
el->el_search.patdir = -1;
- el->el_search.chacha = '\0';
+ el->el_search.chacha = L'\0';
el->el_search.chadir = CHAR_FWD;
el->el_search.chatflg = 0;
return 0;
@@ -83,7 +88,7 @@
/* search_end():
* Initialize the search stuff
*/
-protected void
+libedit_private void
search_end(EditLine *el)
{
@@ -96,7 +101,7 @@
/* regerror():
* Handle regular expression errors
*/
-public void
+void
/*ARGSUSED*/
regerror(const char *msg)
{
@@ -107,12 +112,10 @@
/* el_match():
* Return if string matches pattern
*/
-protected int
-el_match(const Char *str, const Char *pat)
+libedit_private int
+el_match(const wchar_t *str, const wchar_t *pat)
{
-#ifdef WIDECHAR
static ct_buffer_t conv;
-#endif
#if defined (REGEX)
regex_t re;
int rv;
@@ -124,7 +127,7 @@
extern int re_exec(const char *);
#endif
- if (Strstr(str, pat) != 0)
+ if (wcsstr(str, pat) != 0)
return 1;
#if defined(REGEX)
@@ -148,7 +151,7 @@
if (re_comp(ct_encode_string(pat, &conv)) != NULL)
return 0;
else
- return re_exec(ct_encode_string(str, &conv) == 1);
+ return re_exec(ct_encode_string(str, &conv)) == 1;
#endif
}
@@ -156,8 +159,8 @@
/* c_hmatch():
* return True if the pattern matches the prefix
*/
-protected int
-c_hmatch(EditLine *el, const Char *str)
+libedit_private int
+c_hmatch(EditLine *el, const wchar_t *str)
{
#ifdef SDEBUG
(void) fprintf(el->el_errfile, "match `%s' with `%s'\n",
@@ -171,7 +174,7 @@
/* c_setpat():
* Set the history seatch pattern
*/
-protected void
+libedit_private void
c_setpat(EditLine *el)
{
if (el->el_state.lastcmd != ED_SEARCH_PREV_HISTORY &&
@@ -181,11 +184,11 @@
if (el->el_search.patlen >= EL_BUFSIZ)
el->el_search.patlen = EL_BUFSIZ - 1;
if (el->el_search.patlen != 0) {
- (void) Strncpy(el->el_search.patbuf, el->el_line.buffer,
+ (void) wcsncpy(el->el_search.patbuf, el->el_line.buffer,
el->el_search.patlen);
el->el_search.patbuf[el->el_search.patlen] = '\0';
} else
- el->el_search.patlen = Strlen(el->el_search.patbuf);
+ el->el_search.patlen = wcslen(el->el_search.patbuf);
}
#ifdef SDEBUG
(void) fprintf(el->el_errfile, "\neventno = %d\n",
@@ -203,15 +206,14 @@
/* ce_inc_search():
* Emacs incremental search
*/
-protected el_action_t
+libedit_private el_action_t
ce_inc_search(EditLine *el, int dir)
{
- static const Char STRfwd[] = {'f', 'w', 'd', '\0'},
- STRbck[] = {'b', 'c', 'k', '\0'};
- static Char pchar = ':';/* ':' = normal, '?' = failed */
- static Char endcmd[2] = {'\0', '\0'};
- Char ch, *ocursor = el->el_line.cursor, oldpchar = pchar;
- const Char *cp;
+ static const wchar_t STRfwd[] = L"fwd", STRbck[] = L"bck";
+ static wchar_t pchar = L':'; /* ':' = normal, '?' = failed */
+ static wchar_t endcmd[2] = {'\0', '\0'};
+ wchar_t *ocursor = el->el_line.cursor, oldpchar = pchar, ch;
+ const wchar_t *cp;
el_action_t ret = CC_NORM;
@@ -250,7 +252,7 @@
*el->el_line.lastchar = '\0';
re_refresh(el);
- if (FUN(el,getc)(el, &ch) != 1)
+ if (el_wgetc(el, &ch) != 1)
return ed_end_of_file(el, 0);
switch (el->el_map.current[(unsigned char) ch]) {
@@ -326,7 +328,7 @@
default: /* Terminate and execute cmd */
endcmd[0] = ch;
- FUN(el,push)(el, endcmd);
+ el_wpush(el, endcmd);
/* FALLTHROUGH */
case 0033: /* ESC: Terminate */
@@ -346,14 +348,14 @@
/* Can't search if unmatched '[' */
for (cp = &el->el_search.patbuf[el->el_search.patlen-1],
- ch = ']';
+ ch = L']';
cp >= &el->el_search.patbuf[LEN];
cp--)
if (*cp == '[' || *cp == ']') {
ch = *cp;
break;
}
- if (el->el_search.patlen > LEN && ch != '[') {
+ if (el->el_search.patlen > LEN && ch != L'[') {
if (redo && newdir == dir) {
if (pchar == '?') { /* wrap around */
el->el_history.eventno =
@@ -451,11 +453,11 @@
/* cv_search():
* Vi search.
*/
-protected el_action_t
+libedit_private el_action_t
cv_search(EditLine *el, int dir)
{
- Char ch;
- Char tmpbuf[EL_BUFSIZ];
+ wchar_t ch;
+ wchar_t tmpbuf[EL_BUFSIZ];
ssize_t tmplen;
#ifdef ANCHOR
@@ -467,7 +469,7 @@
el->el_search.patdir = dir;
tmplen = c_gets(el, &tmpbuf[LEN],
- dir == ED_SEARCH_PREV_HISTORY ? STR("\n/") : STR("\n?") );
+ dir == ED_SEARCH_PREV_HISTORY ? L"\n/" : L"\n?" );
if (tmplen == -1)
return CC_REFRESH;
@@ -486,11 +488,11 @@
#ifdef ANCHOR
if (el->el_search.patbuf[0] != '.' &&
el->el_search.patbuf[0] != '*') {
- (void) Strncpy(tmpbuf, el->el_search.patbuf,
+ (void) wcsncpy(tmpbuf, el->el_search.patbuf,
sizeof(tmpbuf) / sizeof(*tmpbuf) - 1);
el->el_search.patbuf[0] = '.';
el->el_search.patbuf[1] = '*';
- (void) Strncpy(&el->el_search.patbuf[2], tmpbuf,
+ (void) wcsncpy(&el->el_search.patbuf[2], tmpbuf,
EL_BUFSIZ - 3);
el->el_search.patlen++;
el->el_search.patbuf[el->el_search.patlen++] = '.';
@@ -504,7 +506,7 @@
tmpbuf[tmplen++] = '*';
#endif
tmpbuf[tmplen] = '\0';
- (void) Strncpy(el->el_search.patbuf, tmpbuf, EL_BUFSIZ - 1);
+ (void) wcsncpy(el->el_search.patbuf, tmpbuf, EL_BUFSIZ - 1);
el->el_search.patlen = (size_t)tmplen;
}
el->el_state.lastcmd = (el_action_t) dir; /* avoid c_setpat */
@@ -525,12 +527,12 @@
/* ce_search_line():
* Look for a pattern inside a line
*/
-protected el_action_t
+libedit_private el_action_t
ce_search_line(EditLine *el, int dir)
{
- Char *cp = el->el_line.cursor;
- Char *pattern = el->el_search.patbuf;
- Char oc, *ocp;
+ wchar_t *cp = el->el_line.cursor;
+ wchar_t *pattern = el->el_search.patbuf;
+ wchar_t oc, *ocp;
#ifdef ANCHOR
ocp = &pattern[1];
oc = *ocp;
@@ -567,8 +569,8 @@
/* cv_repeat_srch():
* Vi repeat search
*/
-protected el_action_t
-cv_repeat_srch(EditLine *el, Int c)
+libedit_private el_action_t
+cv_repeat_srch(EditLine *el, wint_t c)
{
#ifdef SDEBUG
@@ -593,17 +595,17 @@
/* cv_csearch():
* Vi character search
*/
-protected el_action_t
-cv_csearch(EditLine *el, int direction, Int ch, int count, int tflag)
+libedit_private el_action_t
+cv_csearch(EditLine *el, int direction, wint_t ch, int count, int tflag)
{
- Char *cp;
+ wchar_t *cp;
if (ch == 0)
return CC_ERROR;
- if (ch == (Int)-1) {
- Char c;
- if (FUN(el,getc)(el, &c) != 1)
+ if (ch == (wint_t)-1) {
+ wchar_t c;
+ if (el_wgetc(el, &c) != 1)
return ed_end_of_file(el, 0);
ch = c;
}
@@ -615,14 +617,14 @@
cp = el->el_line.cursor;
while (count--) {
- if ((Int)*cp == ch)
+ if ((wint_t)*cp == ch)
cp += direction;
for (;;cp += direction) {
if (cp >= el->el_line.lastchar)
return CC_ERROR;
if (cp < el->el_line.buffer)
return CC_ERROR;
- if ((Int)*cp == ch)
+ if ((wint_t)*cp == ch)
break;
}
}
diff --git a/src/search.h b/src/search.h
index d9f27e5..4ca39c4 100644
--- a/src/search.h
+++ b/src/search.h
@@ -1,4 +1,4 @@
-/* $NetBSD: search.h,v 1.9 2009/12/30 22:37:40 christos Exp $ */
+/* $NetBSD: search.h,v 1.14 2016/05/09 21:46:56 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -40,27 +40,25 @@
#ifndef _h_el_search
#define _h_el_search
-#include "histedit.h"
-
typedef struct el_search_t {
- Char *patbuf; /* The pattern buffer */
+ wchar_t *patbuf; /* The pattern buffer */
size_t patlen; /* Length of the pattern buffer */
int patdir; /* Direction of the last search */
int chadir; /* Character search direction */
- Char chacha; /* Character we are looking for */
+ wchar_t chacha; /* Character we are looking for */
char chatflg; /* 0 if f, 1 if t */
} el_search_t;
-protected int el_match(const Char *, const Char *);
-protected int search_init(EditLine *);
-protected void search_end(EditLine *);
-protected int c_hmatch(EditLine *, const Char *);
-protected void c_setpat(EditLine *);
-protected el_action_t ce_inc_search(EditLine *, int);
-protected el_action_t cv_search(EditLine *, int);
-protected el_action_t ce_search_line(EditLine *, int);
-protected el_action_t cv_repeat_srch(EditLine *, Int);
-protected el_action_t cv_csearch(EditLine *, int, Int, int, int);
+libedit_private int el_match(const wchar_t *, const wchar_t *);
+libedit_private int search_init(EditLine *);
+libedit_private void search_end(EditLine *);
+libedit_private int c_hmatch(EditLine *, const wchar_t *);
+libedit_private void c_setpat(EditLine *);
+libedit_private el_action_t ce_inc_search(EditLine *, int);
+libedit_private el_action_t cv_search(EditLine *, int);
+libedit_private el_action_t ce_search_line(EditLine *, int);
+libedit_private el_action_t cv_repeat_srch(EditLine *, wint_t);
+libedit_private el_action_t cv_csearch(EditLine *, int, wint_t, int, int);
#endif /* _h_el_search */
diff --git a/src/sig.c b/src/sig.c
index a5a8a89..83742a3 100644
--- a/src/sig.c
+++ b/src/sig.c
@@ -1,4 +1,4 @@
-/* $NetBSD: sig.c,v 1.17 2011/07/28 20:50:55 christos Exp $ */
+/* $NetBSD: sig.c,v 1.26 2016/05/09 21:46:56 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -37,7 +37,7 @@
#if 0
static char sccsid[] = "@(#)sig.c 8.1 (Berkeley) 6/4/93";
#else
-__RCSID("$NetBSD: sig.c,v 1.17 2011/07/28 20:50:55 christos Exp $");
+__RCSID("$NetBSD: sig.c,v 1.26 2016/05/09 21:46:56 christos Exp $");
#endif
#endif /* not lint && not SCCSID */
@@ -46,31 +46,35 @@
* our policy is to trap all signals, set a good state
* and pass the ball to our caller.
*/
-#include "el.h"
+#include <errno.h>
#include <stdlib.h>
-private EditLine *sel = NULL;
+#include "el.h"
+#include "common.h"
-private const int sighdl[] = {
+static EditLine *sel = NULL;
+
+static const int sighdl[] = {
#define _DO(a) (a),
ALLSIGS
#undef _DO
- 1
};
-private void sig_handler(int);
+static void sig_handler(int);
/* sig_handler():
* This is the handler called for all signals
* XXX: we cannot pass any data so we just store the old editline
* state in a private variable
*/
-private void
+static void
sig_handler(int signo)
{
- int i;
+ int i, save_errno;
sigset_t nset, oset;
+ save_errno = errno;
(void) sigemptyset(&nset);
(void) sigaddset(&nset, signo);
(void) sigprocmask(SIG_BLOCK, &nset, &oset);
@@ -104,13 +108,14 @@
sigemptyset(&sel->el_signal->sig_action[i].sa_mask);
(void) sigprocmask(SIG_SETMASK, &oset, NULL);
(void) kill(0, signo);
+ errno = save_errno;
}
/* sig_init():
* Initialize all signal stuff
*/
-protected int
+libedit_private int
sig_init(EditLine *el)
{
size_t i;
@@ -142,7 +147,7 @@
/* sig_end():
* Clear all signal stuff
*/
-protected void
+libedit_private void
sig_end(EditLine *el)
{
@@ -154,7 +159,7 @@
/* sig_set():
* set all the signal handlers
*/
-protected void
+libedit_private void
sig_set(EditLine *el)
{
size_t i;
@@ -181,7 +186,7 @@
/* sig_clr():
* clear all the signal handlers
*/
-protected void
+libedit_private void
sig_clr(EditLine *el)
{
size_t i;
diff --git a/src/sig.h b/src/sig.h
index c957cfd..5ee453f 100644
--- a/src/sig.h
+++ b/src/sig.h
@@ -1,4 +1,4 @@
-/* $NetBSD: sig.h,v 1.8 2009/02/19 15:20:22 christos Exp $ */
+/* $NetBSD: sig.h,v 1.11 2016/05/09 21:46:56 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -42,8 +42,6 @@
#include <signal.h>
-#include "histedit.h"
-
/*
* Define here all the signals we are going to handle
* The _DO macro is used to iterate in the source code
@@ -64,9 +62,9 @@
volatile sig_atomic_t sig_no;
} *el_signal_t;
-protected void sig_end(EditLine*);
-protected int sig_init(EditLine*);
-protected void sig_set(EditLine*);
-protected void sig_clr(EditLine*);
+libedit_private void sig_end(EditLine*);
+libedit_private int sig_init(EditLine*);
+libedit_private void sig_set(EditLine*);
+libedit_private void sig_clr(EditLine*);
#endif /* _h_el_sig */
diff --git a/src/sys.h b/src/sys.h
index 25b14bb..e575432 100644
--- a/src/sys.h
+++ b/src/sys.h
@@ -1,4 +1,4 @@
-/* $NetBSD: sys.h,v 1.17 2011/09/28 14:08:04 christos Exp $ */
+/* $NetBSD: sys.h,v 1.27 2016/05/09 21:46:56 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -61,19 +61,9 @@
# define __END_DECLS
# endif
#endif
-
-#ifndef public
-# define public /* Externally visible functions/variables */
-#endif
-#ifndef private
-# define private static /* Always hidden internals */
-#endif
-
-#ifndef protected
-# define protected /* Redefined from elsewhere to "static" */
- /* When we want to hide everything */
-#endif
+/* If your compiler does not support this, define it to be empty. */
+#define libedit_private __attribute__((__visibility__("hidden")))
#ifndef __arraycount
# define __arraycount(a) (sizeof(a) / sizeof(*(a)))
@@ -101,14 +91,9 @@
size_t strlcpy(char *dst, const char *src, size_t size);
#endif
-#ifndef HAVE_FGETLN
-#define fgetln libedit_fgetln
-char *fgetln(FILE *fp, size_t *len);
-#endif
-
-#ifndef HAVE_WCSDUP
-#include <wchar.h>
-wchar_t *wcsdup(const wchar_t *);
+#ifndef HAVE_GETLINE
+#define getline libedit_getline
+ssize_t getline(char **line, size_t *len, FILE *fp);
#endif
#ifndef _DIAGASSERT
@@ -123,8 +108,8 @@
typedef unsigned int u_int32_t;
#endif
-#ifndef SIZE_T_MAX
-#define SIZE_T_MAX ((size_t)-1)
+#ifndef HAVE_SIZE_MAX
+#define SIZE_MAX ((size_t)-1)
#endif
#define REGEX /* Use POSIX.2 regular expression functions */
diff --git a/src/terminal.c b/src/terminal.c
index f280d58..d8db3d1 100644
--- a/src/terminal.c
+++ b/src/terminal.c
@@ -1,4 +1,4 @@
-/* $NetBSD: terminal.c,v 1.14 2012/05/30 18:21:14 christos Exp $ */
+/* $NetBSD: terminal.c,v 1.35 2019/02/15 23:20:35 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -37,7 +37,7 @@
#if 0
static char sccsid[] = "@(#)term.c 8.2 (Berkeley) 4/30/95";
#else
-__RCSID("$NetBSD: terminal.c,v 1.14 2012/05/30 18:21:14 christos Exp $");
+__RCSID("$NetBSD: terminal.c,v 1.35 2019/02/15 23:20:35 christos Exp $");
#endif
#endif /* not lint && not SCCSID */
@@ -46,12 +46,14 @@
* We have to declare a static variable here, since the
* termcap putchar routine does not take an argument!
*/
-#include <stdio.h>
-#include <signal.h>
-#include <string.h>
-#include <stdlib.h>
-#include <unistd.h>
+#include <sys/types.h>
+#include <sys/ioctl.h>
#include <limits.h>
+#include <signal.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
#ifdef HAVE_TERMCAP_H
#include <termcap.h>
#endif
@@ -65,15 +67,13 @@
#if defined(HAVE_TERM_H) && !defined(__sun) && !defined(HAVE_TERMCAP_H)
#include <term.h>
#endif
-
-#include <sys/types.h>
-#include <sys/ioctl.h>
#ifdef _REENTRANT
#include <pthread.h>
#endif
#include "el.h"
+#include "fcns.h"
/*
* IMPORTANT NOTE: these routines are allowed to look at the current screen
@@ -89,7 +89,7 @@
#define Str(a) el->el_terminal.t_str[a]
#define Val(a) el->el_terminal.t_val[a]
-private const struct termcapstr {
+static const struct termcapstr {
const char *name;
const char *long_name;
} tstr[] = {
@@ -175,7 +175,7 @@
{ NULL, NULL }
};
-private const struct termcapval {
+static const struct termcapval {
const char *name;
const char *long_name;
} tval[] = {
@@ -200,27 +200,27 @@
};
/* do two or more of the attributes use me */
-private void terminal_setflags(EditLine *);
-private int terminal_rebuffer_display(EditLine *);
-private void terminal_free_display(EditLine *);
-private int terminal_alloc_display(EditLine *);
-private void terminal_alloc(EditLine *, const struct termcapstr *,
+static void terminal_setflags(EditLine *);
+static int terminal_rebuffer_display(EditLine *);
+static void terminal_free_display(EditLine *);
+static int terminal_alloc_display(EditLine *);
+static void terminal_alloc(EditLine *, const struct termcapstr *,
const char *);
-private void terminal_init_arrow(EditLine *);
-private void terminal_reset_arrow(EditLine *);
-private int terminal_putc(int);
-private void terminal_tputs(EditLine *, const char *, int);
+static void terminal_init_arrow(EditLine *);
+static void terminal_reset_arrow(EditLine *);
+static int terminal_putc(int);
+static void terminal_tputs(EditLine *, const char *, int);
#ifdef _REENTRANT
-private pthread_mutex_t terminal_mutex = PTHREAD_MUTEX_INITIALIZER;
+static pthread_mutex_t terminal_mutex = PTHREAD_MUTEX_INITIALIZER;
#endif
-private FILE *terminal_outfile = NULL;
+static FILE *terminal_outfile = NULL;
/* terminal_setflags():
* Set the terminal capability flags
*/
-private void
+static void
terminal_setflags(EditLine *el)
{
EL_FLAGS = 0;
@@ -265,44 +265,58 @@
/* terminal_init():
* Initialize the terminal stuff
*/
-protected int
+libedit_private int
terminal_init(EditLine *el)
{
el->el_terminal.t_buf = el_malloc(TC_BUFSIZE *
sizeof(*el->el_terminal.t_buf));
if (el->el_terminal.t_buf == NULL)
- return -1;
+ goto fail1;
el->el_terminal.t_cap = el_malloc(TC_BUFSIZE *
sizeof(*el->el_terminal.t_cap));
if (el->el_terminal.t_cap == NULL)
- return -1;
+ goto fail2;
el->el_terminal.t_fkey = el_malloc(A_K_NKEYS *
sizeof(*el->el_terminal.t_fkey));
if (el->el_terminal.t_fkey == NULL)
- return -1;
+ goto fail3;
el->el_terminal.t_loc = 0;
el->el_terminal.t_str = el_malloc(T_str *
sizeof(*el->el_terminal.t_str));
if (el->el_terminal.t_str == NULL)
- return -1;
+ goto fail4;
(void) memset(el->el_terminal.t_str, 0, T_str *
sizeof(*el->el_terminal.t_str));
el->el_terminal.t_val = el_malloc(T_val *
sizeof(*el->el_terminal.t_val));
if (el->el_terminal.t_val == NULL)
- return -1;
+ goto fail5;
(void) memset(el->el_terminal.t_val, 0, T_val *
sizeof(*el->el_terminal.t_val));
(void) terminal_set(el, NULL);
terminal_init_arrow(el);
return 0;
+fail5:
+ free(el->el_terminal.t_str);
+ el->el_terminal.t_str = NULL;
+fail4:
+ free(el->el_terminal.t_fkey);
+ el->el_terminal.t_fkey = NULL;
+fail3:
+ free(el->el_terminal.t_cap);
+ el->el_terminal.t_cap = NULL;
+fail2:
+ free(el->el_terminal.t_buf);
+ el->el_terminal.t_buf = NULL;
+fail1:
+ return -1;
}
/* terminal_end():
* Clean up the terminal stuff
*/
-protected void
+libedit_private void
terminal_end(EditLine *el)
{
@@ -324,7 +338,7 @@
/* terminal_alloc():
* Maintain a string pool for termcap strings
*/
-private void
+static void
terminal_alloc(EditLine *el, const struct termcapstr *t, const char *cap)
{
char termbuf[TC_BUFSIZE];
@@ -365,7 +379,7 @@
*/
tlen = 0;
for (tmp = tlist; tmp < &tlist[T_str]; tmp++)
- if (*tmp != NULL && *tmp != '\0' && *tmp != *str) {
+ if (*tmp != NULL && **tmp != '\0' && *tmp != *str) {
char *ptr;
for (ptr = *tmp; *ptr != '\0'; termbuf[tlen++] = *ptr++)
@@ -390,7 +404,7 @@
/* terminal_rebuffer_display():
* Rebuffer the display after the screen changed size
*/
-private int
+static int
terminal_rebuffer_display(EditLine *el)
{
coord_t *c = &el->el_terminal.t_size;
@@ -405,81 +419,81 @@
return 0;
}
+static wint_t **
+terminal_alloc_buffer(EditLine *el)
+{
+ wint_t **b;
+ coord_t *c = &el->el_terminal.t_size;
+ int i;
+
+ b = el_malloc(sizeof(*b) * (size_t)(c->v + 1));
+ if (b == NULL)
+ return NULL;
+ for (i = 0; i < c->v; i++) {
+ b[i] = el_malloc(sizeof(**b) * (size_t)(c->h + 1));
+ if (b[i] == NULL) {
+ while (--i >= 0)
+ el_free(b[i]);
+ el_free(b);
+ return NULL;
+ }
+ }
+ b[c->v] = NULL;
+ return b;
+}
+
+static void
+terminal_free_buffer(wint_t ***bp)
+{
+ wint_t **b;
+ wint_t **bufp;
+
+ if (*bp == NULL)
+ return;
+
+ b = *bp;
+ *bp = NULL;
+
+ for (bufp = b; *bufp != NULL; bufp++)
+ el_free(*bufp);
+ el_free(b);
+}
/* terminal_alloc_display():
* Allocate a new display.
*/
-private int
+static int
terminal_alloc_display(EditLine *el)
{
- int i;
- Char **b;
- coord_t *c = &el->el_terminal.t_size;
-
- b = el_malloc(sizeof(*b) * (size_t)(c->v + 1));
- if (b == NULL)
- return -1;
- for (i = 0; i < c->v; i++) {
- b[i] = el_malloc(sizeof(**b) * (size_t)(c->h + 1));
- if (b[i] == NULL) {
- while (--i >= 0)
- el_free(b[i]);
- el_free(b);
- return -1;
- }
- }
- b[c->v] = NULL;
- el->el_display = b;
-
- b = el_malloc(sizeof(*b) * (size_t)(c->v + 1));
- if (b == NULL)
- return -1;
- for (i = 0; i < c->v; i++) {
- b[i] = el_malloc(sizeof(**b) * (size_t)(c->h + 1));
- if (b[i] == NULL) {
- while (--i >= 0)
- el_free(b[i]);
- el_free(b);
- return -1;
- }
- }
- b[c->v] = NULL;
- el->el_vdisplay = b;
+ el->el_display = terminal_alloc_buffer(el);
+ if (el->el_display == NULL)
+ goto done;
+ el->el_vdisplay = terminal_alloc_buffer(el);
+ if (el->el_vdisplay == NULL)
+ goto done;
return 0;
+done:
+ terminal_free_display(el);
+ return -1;
}
/* terminal_free_display():
* Free the display buffers
*/
-private void
+static void
terminal_free_display(EditLine *el)
{
- Char **b;
- Char **bufp;
-
- b = el->el_display;
- el->el_display = NULL;
- if (b != NULL) {
- for (bufp = b; *bufp != NULL; bufp++)
- el_free(*bufp);
- el_free(b);
- }
- b = el->el_vdisplay;
- el->el_vdisplay = NULL;
- if (b != NULL) {
- for (bufp = b; *bufp != NULL; bufp++)
- el_free(*bufp);
- el_free(b);
- }
+ terminal_free_buffer(&el->el_display);
+ terminal_free_buffer(&el->el_vdisplay);
}
/* terminal_move_to_line():
* move to line <where> (first line == 0)
- * as efficiently as possible
+ * as efficiently as possible
*/
-protected void
+libedit_private void
terminal_move_to_line(EditLine *el, int where)
{
int del;
@@ -490,44 +504,19 @@
if (where > el->el_terminal.t_size.v) {
#ifdef DEBUG_SCREEN
(void) fprintf(el->el_errfile,
- "terminal_move_to_line: where is ridiculous: %d\r\n",
- where);
+ "%s: where is ridiculous: %d\r\n", __func__, where);
#endif /* DEBUG_SCREEN */
return;
}
if ((del = where - el->el_cursor.v) > 0) {
- while (del > 0) {
- if (EL_HAS_AUTO_MARGINS &&
- el->el_display[el->el_cursor.v][0] != '\0') {
- size_t h = (size_t)
- (el->el_terminal.t_size.h - 1);
-#ifdef WIDECHAR
- for (; h > 0 &&
- el->el_display[el->el_cursor.v][h] ==
- MB_FILL_CHAR;
- h--)
- continue;
-#endif
- /* move without newline */
- terminal_move_to_char(el, (int)h);
- terminal_overwrite(el, &el->el_display
- [el->el_cursor.v][el->el_cursor.h],
- (size_t)(el->el_terminal.t_size.h -
- el->el_cursor.h));
- /* updates Cursor */
- del--;
- } else {
- if ((del > 1) && GoodStr(T_DO)) {
- terminal_tputs(el, tgoto(Str(T_DO), del,
- del), del);
- del = 0;
- } else {
- for (; del > 0; del--)
- terminal__putc(el, '\n');
- /* because the \n will become \r\n */
- el->el_cursor.h = 0;
- }
- }
+ if ((del > 1) && GoodStr(T_DO)) {
+ terminal_tputs(el, tgoto(Str(T_DO), del, del), del);
+ del = 0;
+ } else {
+ for (; del > 0; del--)
+ terminal__putc(el, '\n');
+ /* because the \n will become \r\n */
+ el->el_cursor.h = 0;
}
} else { /* del < 0 */
if (GoodStr(T_UP) && (-del > 1 || !GoodStr(T_up)))
@@ -545,7 +534,7 @@
/* terminal_move_to_char():
* Move to the character position specified
*/
-protected void
+libedit_private void
terminal_move_to_char(EditLine *el, int where)
{
int del, i;
@@ -557,8 +546,7 @@
if (where > el->el_terminal.t_size.h) {
#ifdef DEBUG_SCREEN
(void) fprintf(el->el_errfile,
- "terminal_move_to_char: where is riduculous: %d\r\n",
- where);
+ "%s: where is ridiculous: %d\r\n", __func__, where);
#endif /* DEBUG_SCREEN */
return;
}
@@ -582,11 +570,9 @@
if (EL_CAN_TAB) {
if ((el->el_cursor.h & 0370) !=
(where & ~0x7)
-#ifdef WIDECHAR
&& (el->el_display[
el->el_cursor.v][where & 0370] !=
MB_FILL_CHAR)
-#endif
) {
/* if not within tab stop */
for (i =
@@ -594,7 +580,7 @@
i < (where & ~0x7);
i += 8)
terminal__putc(el,
- '\t');
+ '\t');
/* then tab over */
el->el_cursor.h = where & ~0x7;
}
@@ -643,8 +629,8 @@
* Overstrike num characters
* Assumes MB_FILL_CHARs are present to keep the column count correct
*/
-protected void
-terminal_overwrite(EditLine *el, const Char *cp, size_t n)
+libedit_private void
+terminal_overwrite(EditLine *el, const wchar_t *cp, size_t n)
{
if (n == 0)
return;
@@ -652,7 +638,7 @@
if (n > (size_t)el->el_terminal.t_size.h) {
#ifdef DEBUG_SCREEN
(void) fprintf(el->el_errfile,
- "terminal_overwrite: n is riduculous: %d\r\n", n);
+ "%s: n is ridiculous: %zu\r\n", __func__, n);
#endif /* DEBUG_SCREEN */
return;
}
@@ -670,15 +656,13 @@
if (EL_HAS_MAGIC_MARGINS) {
/* force the wrap to avoid the "magic"
* situation */
- Char c;
+ wchar_t c;
if ((c = el->el_display[el->el_cursor.v]
[el->el_cursor.h]) != '\0') {
terminal_overwrite(el, &c, (size_t)1);
-#ifdef WIDECHAR
while (el->el_display[el->el_cursor.v]
[el->el_cursor.h] == MB_FILL_CHAR)
el->el_cursor.h++;
-#endif
} else {
terminal__putc(el, ' ');
el->el_cursor.h = 1;
@@ -693,7 +677,7 @@
/* terminal_deletechars():
* Delete num characters
*/
-protected void
+libedit_private void
terminal_deletechars(EditLine *el, int num)
{
if (num <= 0)
@@ -708,7 +692,7 @@
if (num > el->el_terminal.t_size.h) {
#ifdef DEBUG_SCREEN
(void) fprintf(el->el_errfile,
- "terminal_deletechars: num is riduculous: %d\r\n", num);
+ "%s: num is ridiculous: %d\r\n", __func__, num);
#endif /* DEBUG_SCREEN */
return;
}
@@ -735,8 +719,8 @@
* characters in the line
* Assumes MB_FILL_CHARs are present to keep column count correct
*/
-protected void
-terminal_insertwrite(EditLine *el, Char *cp, int num)
+libedit_private void
+terminal_insertwrite(EditLine *el, wchar_t *cp, int num)
{
if (num <= 0)
return;
@@ -749,7 +733,7 @@
if (num > el->el_terminal.t_size.h) {
#ifdef DEBUG_SCREEN
(void) fprintf(el->el_errfile,
- "StartInsert: num is riduculous: %d\r\n", num);
+ "%s: num is ridiculous: %d\r\n", __func__, num);
#endif /* DEBUG_SCREEN */
return;
}
@@ -794,7 +778,7 @@
/* terminal_clear_EOL():
* clear to end of line. There are num characters to clear
*/
-protected void
+libedit_private void
terminal_clear_EOL(EditLine *el, int num)
{
int i;
@@ -812,7 +796,7 @@
/* terminal_clear_screen():
* Clear the screen
*/
-protected void
+libedit_private void
terminal_clear_screen(EditLine *el)
{ /* clear the whole screen and home */
@@ -833,7 +817,7 @@
/* terminal_beep():
* Beep the way the terminal wants us
*/
-protected void
+libedit_private void
terminal_beep(EditLine *el)
{
if (GoodStr(T_bl))
@@ -844,7 +828,7 @@
}
-protected void
+libedit_private void
terminal_get(EditLine *el, const char **term)
{
*term = el->el_terminal.t_name;
@@ -854,7 +838,7 @@
/* terminal_set():
* Read in the terminal capabilities from the requested terminal
*/
-protected int
+libedit_private int
terminal_set(EditLine *el, const char *term)
{
int i;
@@ -943,7 +927,7 @@
* Return the new window size in lines and cols, and
* true if the size was changed.
*/
-protected int
+libedit_private int
terminal_get_size(EditLine *el, int *lins, int *cols)
{
@@ -979,7 +963,7 @@
/* terminal_change_size():
* Change the size of the terminal
*/
-protected int
+libedit_private int
terminal_change_size(EditLine *el, int lins, int cols)
{
/*
@@ -999,42 +983,42 @@
/* terminal_init_arrow():
* Initialize the arrow key bindings from termcap
*/
-private void
+static void
terminal_init_arrow(EditLine *el)
{
funckey_t *arrow = el->el_terminal.t_fkey;
- arrow[A_K_DN].name = STR("down");
+ arrow[A_K_DN].name = L"down";
arrow[A_K_DN].key = T_kd;
arrow[A_K_DN].fun.cmd = ED_NEXT_HISTORY;
arrow[A_K_DN].type = XK_CMD;
- arrow[A_K_UP].name = STR("up");
+ arrow[A_K_UP].name = L"up";
arrow[A_K_UP].key = T_ku;
arrow[A_K_UP].fun.cmd = ED_PREV_HISTORY;
arrow[A_K_UP].type = XK_CMD;
- arrow[A_K_LT].name = STR("left");
+ arrow[A_K_LT].name = L"left";
arrow[A_K_LT].key = T_kl;
arrow[A_K_LT].fun.cmd = ED_PREV_CHAR;
arrow[A_K_LT].type = XK_CMD;
- arrow[A_K_RT].name = STR("right");
+ arrow[A_K_RT].name = L"right";
arrow[A_K_RT].key = T_kr;
arrow[A_K_RT].fun.cmd = ED_NEXT_CHAR;
arrow[A_K_RT].type = XK_CMD;
- arrow[A_K_HO].name = STR("home");
+ arrow[A_K_HO].name = L"home";
arrow[A_K_HO].key = T_kh;
arrow[A_K_HO].fun.cmd = ED_MOVE_TO_BEG;
arrow[A_K_HO].type = XK_CMD;
- arrow[A_K_EN].name = STR("end");
+ arrow[A_K_EN].name = L"end";
arrow[A_K_EN].key = T_at7;
arrow[A_K_EN].fun.cmd = ED_MOVE_TO_END;
arrow[A_K_EN].type = XK_CMD;
- arrow[A_K_DE].name = STR("delete");
+ arrow[A_K_DE].name = L"delete";
arrow[A_K_DE].key = T_kD;
arrow[A_K_DE].fun.cmd = ED_DELETE_NEXT_CHAR;
arrow[A_K_DE].type = XK_CMD;
@@ -1044,22 +1028,22 @@
/* terminal_reset_arrow():
* Reset arrow key bindings
*/
-private void
+static void
terminal_reset_arrow(EditLine *el)
{
funckey_t *arrow = el->el_terminal.t_fkey;
- static const Char strA[] = {033, '[', 'A', '\0'};
- static const Char strB[] = {033, '[', 'B', '\0'};
- static const Char strC[] = {033, '[', 'C', '\0'};
- static const Char strD[] = {033, '[', 'D', '\0'};
- static const Char strH[] = {033, '[', 'H', '\0'};
- static const Char strF[] = {033, '[', 'F', '\0'};
- static const Char stOA[] = {033, 'O', 'A', '\0'};
- static const Char stOB[] = {033, 'O', 'B', '\0'};
- static const Char stOC[] = {033, 'O', 'C', '\0'};
- static const Char stOD[] = {033, 'O', 'D', '\0'};
- static const Char stOH[] = {033, 'O', 'H', '\0'};
- static const Char stOF[] = {033, 'O', 'F', '\0'};
+ static const wchar_t strA[] = L"\033[A";
+ static const wchar_t strB[] = L"\033[B";
+ static const wchar_t strC[] = L"\033[C";
+ static const wchar_t strD[] = L"\033[D";
+ static const wchar_t strH[] = L"\033[H";
+ static const wchar_t strF[] = L"\033[F";
+ static const wchar_t stOA[] = L"\033OA";
+ static const wchar_t stOB[] = L"\033OB";
+ static const wchar_t stOC[] = L"\033OC";
+ static const wchar_t stOD[] = L"\033OD";
+ static const wchar_t stOH[] = L"\033OH";
+ static const wchar_t stOF[] = L"\033OF";
keymacro_add(el, strA, &arrow[A_K_UP].fun, arrow[A_K_UP].type);
keymacro_add(el, strB, &arrow[A_K_DN].fun, arrow[A_K_DN].type);
@@ -1094,15 +1078,15 @@
/* terminal_set_arrow():
* Set an arrow key binding
*/
-protected int
-terminal_set_arrow(EditLine *el, const Char *name, keymacro_value_t *fun,
+libedit_private int
+terminal_set_arrow(EditLine *el, const wchar_t *name, keymacro_value_t *fun,
int type)
{
funckey_t *arrow = el->el_terminal.t_fkey;
int i;
for (i = 0; i < A_K_NKEYS; i++)
- if (Strcmp(name, arrow[i].name) == 0) {
+ if (wcscmp(name, arrow[i].name) == 0) {
arrow[i].fun = *fun;
arrow[i].type = type;
return 0;
@@ -1114,14 +1098,14 @@
/* terminal_clear_arrow():
* Clear an arrow key binding
*/
-protected int
-terminal_clear_arrow(EditLine *el, const Char *name)
+libedit_private int
+terminal_clear_arrow(EditLine *el, const wchar_t *name)
{
funckey_t *arrow = el->el_terminal.t_fkey;
int i;
for (i = 0; i < A_K_NKEYS; i++)
- if (Strcmp(name, arrow[i].name) == 0) {
+ if (wcscmp(name, arrow[i].name) == 0) {
arrow[i].type = XK_NOD;
return 0;
}
@@ -1132,14 +1116,14 @@
/* terminal_print_arrow():
* Print the arrow key bindings
*/
-protected void
-terminal_print_arrow(EditLine *el, const Char *name)
+libedit_private void
+terminal_print_arrow(EditLine *el, const wchar_t *name)
{
int i;
funckey_t *arrow = el->el_terminal.t_fkey;
for (i = 0; i < A_K_NKEYS; i++)
- if (*name == '\0' || Strcmp(name, arrow[i].name) == 0)
+ if (*name == '\0' || wcscmp(name, arrow[i].name) == 0)
if (arrow[i].type != XK_NOD)
keymacro_kprint(el, arrow[i].name,
&arrow[i].fun, arrow[i].type);
@@ -1149,7 +1133,7 @@
/* terminal_bind_arrow():
* Bind the arrow keys
*/
-protected void
+libedit_private void
terminal_bind_arrow(EditLine *el)
{
el_action_t *map;
@@ -1168,8 +1152,8 @@
terminal_reset_arrow(el);
for (i = 0; i < A_K_NKEYS; i++) {
- Char wt_str[VISUAL_WIDTH_MAX];
- Char *px;
+ wchar_t wt_str[VISUAL_WIDTH_MAX];
+ wchar_t *px;
size_t n;
p = el->el_terminal.t_str[arrow[i].key];
@@ -1214,7 +1198,7 @@
/* terminal_putc():
* Add a character
*/
-private int
+static int
terminal_putc(int c)
{
if (terminal_outfile == NULL)
@@ -1222,7 +1206,7 @@
return fputc(c, terminal_outfile);
}
-private void
+static void
terminal_tputs(EditLine *el, const char *cap, int affcnt)
{
#ifdef _REENTRANT
@@ -1238,13 +1222,15 @@
/* terminal__putc():
* Add a character
*/
-protected int
-terminal__putc(EditLine *el, Int c)
+libedit_private int
+terminal__putc(EditLine *el, wint_t c)
{
char buf[MB_LEN_MAX +1];
ssize_t i;
- if (c == (Int)MB_FILL_CHAR)
+ if (c == (wint_t)MB_FILL_CHAR)
return 0;
+ if (c & EL_LITERAL)
+ return fputs(literal_get(el, c), el->el_outfile);
i = ct_encode_char(buf, (size_t)MB_LEN_MAX, c);
if (i <= 0)
return (int)i;
@@ -1255,7 +1241,7 @@
/* terminal__flush():
* Flush output
*/
-protected void
+libedit_private void
terminal__flush(EditLine *el)
{
@@ -1265,10 +1251,10 @@
/* terminal_writec():
* Write the given character out, in a human readable form
*/
-protected void
-terminal_writec(EditLine *el, Int c)
+libedit_private void
+terminal_writec(EditLine *el, wint_t c)
{
- Char visbuf[VISUAL_WIDTH_MAX +1];
+ wchar_t visbuf[VISUAL_WIDTH_MAX +1];
ssize_t vcnt = ct_visual_char(visbuf, VISUAL_WIDTH_MAX, c);
if (vcnt < 0)
vcnt = 0;
@@ -1281,10 +1267,10 @@
/* terminal_telltc():
* Print the current termcap characteristics
*/
-protected int
+libedit_private int
/*ARGSUSED*/
-terminal_telltc(EditLine *el, int argc __attribute__((__unused__)),
- const Char **argv __attribute__((__unused__)))
+terminal_telltc(EditLine *el, int argc __attribute__((__unused__)),
+ const wchar_t **argv __attribute__((__unused__)))
{
const struct termcapstr *t;
char **ts;
@@ -1307,8 +1293,8 @@
const char *ub;
if (*ts && **ts) {
ub = ct_encode_string(ct_visual_string(
- ct_decode_string(*ts, &el->el_scratch)),
- &el->el_scratch);
+ ct_decode_string(*ts, &el->el_scratch),
+ &el->el_visual), &el->el_scratch);
} else {
ub = "(empty)";
}
@@ -1323,10 +1309,10 @@
/* terminal_settc():
* Change the current terminal characteristics
*/
-protected int
+libedit_private int
/*ARGSUSED*/
terminal_settc(EditLine *el, int argc __attribute__((__unused__)),
- const Char **argv)
+ const wchar_t **argv)
{
const struct termcapstr *ts;
const struct termcapval *tv;
@@ -1370,7 +1356,7 @@
el->el_terminal.t_val[tv - tval] = 0;
else {
(void) fprintf(el->el_errfile,
- "" FSTR ": Bad value `%s'.\n", argv[0], how);
+ "%ls: Bad value `%s'.\n", argv[0], how);
return -1;
}
terminal_setflags(el);
@@ -1384,7 +1370,7 @@
i = strtol(how, &ep, 10);
if (*ep != '\0') {
(void) fprintf(el->el_errfile,
- "" FSTR ": Bad value `%s'.\n", argv[0], how);
+ "%ls: Bad value `%s'.\n", argv[0], how);
return -1;
}
el->el_terminal.t_val[tv - tval] = (int) i;
@@ -1402,7 +1388,7 @@
/* terminal_gettc():
* Get the current terminal characteristics
*/
-protected int
+libedit_private int
/*ARGSUSED*/
terminal_gettc(EditLine *el, int argc __attribute__((__unused__)), char **argv)
{
@@ -1456,13 +1442,13 @@
/* terminal_echotc():
* Print the termcap string out with variable substitution
*/
-protected int
+libedit_private int
/*ARGSUSED*/
terminal_echotc(EditLine *el, int argc __attribute__((__unused__)),
- const Char **argv)
+ const wchar_t **argv)
{
char *cap, *scap;
- Char *ep;
+ wchar_t *ep;
int arg_need, arg_cols, arg_rows;
int verbose = 0, silent = 0;
char *area;
@@ -1493,28 +1479,28 @@
}
if (!*argv || *argv[0] == '\0')
return 0;
- if (Strcmp(*argv, STR("tabs")) == 0) {
+ if (wcscmp(*argv, L"tabs") == 0) {
(void) fprintf(el->el_outfile, fmts, EL_CAN_TAB ? "yes" : "no");
return 0;
- } else if (Strcmp(*argv, STR("meta")) == 0) {
+ } else if (wcscmp(*argv, L"meta") == 0) {
(void) fprintf(el->el_outfile, fmts, Val(T_km) ? "yes" : "no");
return 0;
- } else if (Strcmp(*argv, STR("xn")) == 0) {
+ } else if (wcscmp(*argv, L"xn") == 0) {
(void) fprintf(el->el_outfile, fmts, EL_HAS_MAGIC_MARGINS ?
"yes" : "no");
return 0;
- } else if (Strcmp(*argv, STR("am")) == 0) {
+ } else if (wcscmp(*argv, L"am") == 0) {
(void) fprintf(el->el_outfile, fmts, EL_HAS_AUTO_MARGINS ?
"yes" : "no");
return 0;
- } else if (Strcmp(*argv, STR("baud")) == 0) {
+ } else if (wcscmp(*argv, L"baud") == 0) {
(void) fprintf(el->el_outfile, fmtd, (int)el->el_tty.t_speed);
return 0;
- } else if (Strcmp(*argv, STR("rows")) == 0 ||
- Strcmp(*argv, STR("lines")) == 0) {
+ } else if (wcscmp(*argv, L"rows") == 0 ||
+ wcscmp(*argv, L"lines") == 0) {
(void) fprintf(el->el_outfile, fmtd, Val(T_li));
return 0;
- } else if (Strcmp(*argv, STR("cols")) == 0) {
+ } else if (wcscmp(*argv, L"cols") == 0) {
(void) fprintf(el->el_outfile, fmtd, Val(T_co));
return 0;
}
@@ -1530,12 +1516,12 @@
}
if (t->name == NULL) {
/* XXX: some systems' tgetstr needs non const */
- scap = tgetstr(ct_encode_string((Char*)*argv, &el->el_scratch), &area);
+ scap = tgetstr(ct_encode_string(*argv, &el->el_scratch), &area);
}
if (!scap || scap[0] == '\0') {
if (!silent)
(void) fprintf(el->el_errfile,
- "echotc: Termcap parameter `" FSTR "' not found.\n",
+ "echotc: Termcap parameter `%ls' not found.\n",
*argv);
return -1;
}
@@ -1578,7 +1564,7 @@
if (*argv && *argv[0]) {
if (!silent)
(void) fprintf(el->el_errfile,
- "echotc: Warning: Extra argument `" FSTR "'.\n",
+ "echotc: Warning: Extra argument `%ls'.\n",
*argv);
return -1;
}
@@ -1593,11 +1579,11 @@
return -1;
}
arg_cols = 0;
- i = Strtol(*argv, &ep, 10);
+ i = wcstol(*argv, &ep, 10);
if (*ep != '\0' || i < 0) {
if (!silent)
(void) fprintf(el->el_errfile,
- "echotc: Bad value `" FSTR "' for rows.\n",
+ "echotc: Bad value `%ls' for rows.\n",
*argv);
return -1;
}
@@ -1606,7 +1592,7 @@
if (*argv && *argv[0]) {
if (!silent)
(void) fprintf(el->el_errfile,
- "echotc: Warning: Extra argument `" FSTR
+ "echotc: Warning: Extra argument `%ls"
"'.\n", *argv);
return -1;
}
@@ -1627,11 +1613,11 @@
"echotc: Warning: Missing argument.\n");
return -1;
}
- i = Strtol(*argv, &ep, 10);
+ i = wcstol(*argv, &ep, 10);
if (*ep != '\0' || i < 0) {
if (!silent)
(void) fprintf(el->el_errfile,
- "echotc: Bad value `" FSTR "' for cols.\n",
+ "echotc: Bad value `%ls' for cols.\n",
*argv);
return -1;
}
@@ -1643,11 +1629,11 @@
"echotc: Warning: Missing argument.\n");
return -1;
}
- i = Strtol(*argv, &ep, 10);
+ i = wcstol(*argv, &ep, 10);
if (*ep != '\0' || i < 0) {
if (!silent)
(void) fprintf(el->el_errfile,
- "echotc: Bad value `" FSTR "' for rows.\n",
+ "echotc: Bad value `%ls' for rows.\n",
*argv);
return -1;
}
@@ -1655,14 +1641,14 @@
if (*ep != '\0') {
if (!silent)
(void) fprintf(el->el_errfile,
- "echotc: Bad value `" FSTR "'.\n", *argv);
+ "echotc: Bad value `%ls'.\n", *argv);
return -1;
}
argv++;
if (*argv && *argv[0]) {
if (!silent)
(void) fprintf(el->el_errfile,
- "echotc: Warning: Extra argument `" FSTR
+ "echotc: Warning: Extra argument `%ls"
"'.\n", *argv);
return -1;
}
diff --git a/src/terminal.h b/src/terminal.h
index 42122a7..e458369 100644
--- a/src/terminal.h
+++ b/src/terminal.h
@@ -1,4 +1,4 @@
-/* $NetBSD: terminal.h,v 1.4 2012/03/24 20:09:30 christos Exp $ */
+/* $NetBSD: terminal.h,v 1.9 2016/05/09 21:46:56 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -40,10 +40,8 @@
#ifndef _h_el_terminal
#define _h_el_terminal
-#include "histedit.h"
-
typedef struct { /* Symbolic function key bindings */
- const Char *name; /* name of the key */
+ const wchar_t *name; /* name of the key */
int key; /* Index in termcap table */
keymacro_value_t fun; /* Function bound to it */
int type; /* Type of function */
@@ -91,31 +89,32 @@
extern char* tgetstr(char*, char**);
#endif
-protected void terminal_move_to_line(EditLine *, int);
-protected void terminal_move_to_char(EditLine *, int);
-protected void terminal_clear_EOL(EditLine *, int);
-protected void terminal_overwrite(EditLine *, const Char *, size_t);
-protected void terminal_insertwrite(EditLine *, Char *, int);
-protected void terminal_deletechars(EditLine *, int);
-protected void terminal_clear_screen(EditLine *);
-protected void terminal_beep(EditLine *);
-protected int terminal_change_size(EditLine *, int, int);
-protected int terminal_get_size(EditLine *, int *, int *);
-protected int terminal_init(EditLine *);
-protected void terminal_bind_arrow(EditLine *);
-protected void terminal_print_arrow(EditLine *, const Char *);
-protected int terminal_clear_arrow(EditLine *, const Char *);
-protected int terminal_set_arrow(EditLine *, const Char *, keymacro_value_t *, int);
-protected void terminal_end(EditLine *);
-protected void terminal_get(EditLine *, const char **);
-protected int terminal_set(EditLine *, const char *);
-protected int terminal_settc(EditLine *, int, const Char **);
-protected int terminal_gettc(EditLine *, int, char **);
-protected int terminal_telltc(EditLine *, int, const Char **);
-protected int terminal_echotc(EditLine *, int, const Char **);
-protected void terminal_writec(EditLine *, Int);
-protected int terminal__putc(EditLine *, Int);
-protected void terminal__flush(EditLine *);
+libedit_private void terminal_move_to_line(EditLine *, int);
+libedit_private void terminal_move_to_char(EditLine *, int);
+libedit_private void terminal_clear_EOL(EditLine *, int);
+libedit_private void terminal_overwrite(EditLine *, const wchar_t *, size_t);
+libedit_private void terminal_insertwrite(EditLine *, wchar_t *, int);
+libedit_private void terminal_deletechars(EditLine *, int);
+libedit_private void terminal_clear_screen(EditLine *);
+libedit_private void terminal_beep(EditLine *);
+libedit_private int terminal_change_size(EditLine *, int, int);
+libedit_private int terminal_get_size(EditLine *, int *, int *);
+libedit_private int terminal_init(EditLine *);
+libedit_private void terminal_bind_arrow(EditLine *);
+libedit_private void terminal_print_arrow(EditLine *, const wchar_t *);
+libedit_private int terminal_clear_arrow(EditLine *, const wchar_t *);
+libedit_private int terminal_set_arrow(EditLine *, const wchar_t *,
+ keymacro_value_t *, int);
+libedit_private void terminal_end(EditLine *);
+libedit_private void terminal_get(EditLine *, const char **);
+libedit_private int terminal_set(EditLine *, const char *);
+libedit_private int terminal_settc(EditLine *, int, const wchar_t **);
+libedit_private int terminal_gettc(EditLine *, int, char **);
+libedit_private int terminal_telltc(EditLine *, int, const wchar_t **);
+libedit_private int terminal_echotc(EditLine *, int, const wchar_t **);
+libedit_private void terminal_writec(EditLine *, wint_t);
+libedit_private int terminal__putc(EditLine *, wint_t);
+libedit_private void terminal__flush(EditLine *);
/*
* Easy access macros
diff --git a/src/tokenizer.c b/src/tokenizer.c
index 5cb960d..5efb432 100644
--- a/src/tokenizer.c
+++ b/src/tokenizer.c
@@ -1,4 +1,4 @@
-/* $NetBSD: tokenizer.c,v 1.21 2011/08/16 16:25:15 christos Exp $ */
+/* $NetBSD: tokenizer.c,v 1.28 2016/04/11 18:56:31 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -40,7 +40,7 @@
#if 0
static char sccsid[] = "@(#)tokenizer.c 8.1 (Berkeley) 6/4/93";
#else
-__RCSID("$NetBSD: tokenizer.c,v 1.21 2011/08/16 16:25:15 christos Exp $");
+__RCSID("$NetBSD: tokenizer.c,v 1.28 2016/04/11 18:56:31 christos Exp $");
#endif
#endif /* not lint && not SCCSID */
@@ -48,10 +48,10 @@
/*
* tokenize.c: Bourne shell like tokenizer
*/
-#include <string.h>
#include <stdlib.h>
+#include <string.h>
+
#include "histedit.h"
-#include "chartype.h"
typedef enum {
Q_none, Q_single, Q_double, Q_one, Q_doubleone
@@ -68,8 +68,22 @@
#define tok_malloc(a) malloc(a)
#define tok_free(a) free(a)
#define tok_realloc(a, b) realloc(a, b)
-#define tok_strdup(a) Strdup(a)
+#ifdef NARROWCHAR
+#define Char char
+#define FUN(prefix, rest) prefix ## _ ## rest
+#define TYPE(type) type
+#define STR(x) x
+#define Strchr(s, c) strchr(s, c)
+#define tok_strdup(s) strdup(s)
+#else
+#define Char wchar_t
+#define FUN(prefix, rest) prefix ## _w ## rest
+#define TYPE(type) type ## W
+#define STR(x) L ## x
+#define Strchr(s, c) wcschr(s, c)
+#define tok_strdup(s) wcsdup(s)
+#endif
struct TYPE(tokenizer) {
Char *ifs; /* In field separator */
@@ -83,13 +97,13 @@
};
-private void FUN(tok,finish)(TYPE(Tokenizer) *);
+static void FUN(tok,finish)(TYPE(Tokenizer) *);
/* FUN(tok,finish)():
* Finish a word in the tokenizer.
*/
-private void
+static void
FUN(tok,finish)(TYPE(Tokenizer) *tok)
{
@@ -106,7 +120,7 @@
/* FUN(tok,init)():
* Initialize the tokenizer
*/
-public TYPE(Tokenizer) *
+TYPE(Tokenizer) *
FUN(tok,init)(const Char *ifs)
{
TYPE(Tokenizer) *tok = tok_malloc(sizeof(*tok));
@@ -147,7 +161,7 @@
/* FUN(tok,reset)():
* Reset the tokenizer
*/
-public void
+void
FUN(tok,reset)(TYPE(Tokenizer) *tok)
{
@@ -162,7 +176,7 @@
/* FUN(tok,end)():
* Clean up
*/
-public void
+void
FUN(tok,end)(TYPE(Tokenizer) *tok)
{
@@ -191,7 +205,7 @@
* cursorc if !NULL, argv element containing cursor
* cursorv if !NULL, offset in argv[cursorc] of cursor
*/
-public int
+int
FUN(tok,line)(TYPE(Tokenizer) *tok, const TYPE(LineInfo) *line,
int *argc, const Char ***argv, int *cursorc, int *cursoro)
{
@@ -416,8 +430,10 @@
Char **p;
tok->amax += AINCR;
p = tok_realloc(tok->argv, tok->amax * sizeof(*p));
- if (p == NULL)
+ if (p == NULL) {
+ tok->amax -= AINCR;
return -1;
+ }
tok->argv = p;
}
}
@@ -440,7 +456,7 @@
* Simpler version of tok_line, taking a NUL terminated line
* and splitting into words, ignoring cursor state.
*/
-public int
+int
FUN(tok,str)(TYPE(Tokenizer) *tok, const Char *line, int *argc,
const Char ***argv)
{
@@ -449,5 +465,5 @@
memset(&li, 0, sizeof(li));
li.buffer = line;
li.cursor = li.lastchar = Strchr(line, '\0');
- return FUN(tok,line(tok, &li, argc, argv, NULL, NULL));
+ return FUN(tok,line)(tok, &li, argc, argv, NULL, NULL);
}
diff --git a/src/tokenizern.c b/src/tokenizern.c
new file mode 100644
index 0000000..5846b60
--- /dev/null
+++ b/src/tokenizern.c
@@ -0,0 +1,3 @@
+#include "config.h"
+#define NARROWCHAR
+#include "tokenizer.c"
diff --git a/src/tty.c b/src/tty.c
index 57c8ee8..743075e 100644
--- a/src/tty.c
+++ b/src/tty.c
@@ -1,4 +1,4 @@
-/* $NetBSD: tty.c,v 1.42 2012/05/15 15:59:01 christos Exp $ */
+/* $NetBSD: tty.c,v 1.68 2018/12/02 16:58:13 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -37,7 +37,7 @@
#if 0
static char sccsid[] = "@(#)tty.c 8.1 (Berkeley) 6/4/93";
#else
-__RCSID("$NetBSD: tty.c,v 1.42 2012/05/15 15:59:01 christos Exp $");
+__RCSID("$NetBSD: tty.c,v 1.68 2018/12/02 16:58:13 christos Exp $");
#endif
#endif /* not lint && not SCCSID */
@@ -46,10 +46,14 @@
*/
#include <assert.h>
#include <errno.h>
-#include <unistd.h> /* for isatty */
+#include <stdlib.h> /* for abort */
+#include <string.h>
#include <strings.h> /* for ffs */
+#include <unistd.h> /* for isatty */
+
#include "el.h"
-#include "tty.h"
+#include "fcns.h"
+#include "parse.h"
typedef struct ttymodes_t {
const char *m_name;
@@ -58,12 +62,12 @@
} ttymodes_t;
typedef struct ttymap_t {
- Int nch, och; /* Internal and termio rep of chars */
+ wint_t nch, och; /* Internal and termio rep of chars */
el_action_t bind[3]; /* emacs, vi, and vi-cmd */
} ttymap_t;
-private const ttyperm_t ttyperm = {
+static const ttyperm_t ttyperm = {
{
{"iflag:", ICRNL, (INLCR | IGNCR)},
{"oflag:", (OPOST | ONLCR), ONLRET},
@@ -91,7 +95,7 @@
}
};
-private const ttychar_t ttychar = {
+static const ttychar_t ttychar = {
{
CINTR, CQUIT, CERASE, CKILL,
CEOF, CEOL, CEOL2, CSWTCH,
@@ -121,7 +125,7 @@
}
};
-private const ttymap_t tty_map[] = {
+static const ttymap_t tty_map[] = {
#ifdef VERASE
{C_ERASE, VERASE,
{EM_DELETE_PREV_CHAR, VI_DELETE_PREV_CHAR, ED_PREV_CHAR}},
@@ -154,11 +158,11 @@
{C_LNEXT, VLNEXT,
{ED_QUOTED_INSERT, ED_QUOTED_INSERT, ED_UNASSIGNED}},
#endif /* VLNEXT */
- {(Int)-1, (Int)-1,
+ {(wint_t)-1, (wint_t)-1,
{ED_UNASSIGNED, ED_UNASSIGNED, ED_UNASSIGNED}}
};
-private const ttymodes_t ttymodes[] = {
+static const ttymodes_t ttymodes[] = {
#ifdef IGNBRK
{"ignbrk", IGNBRK, MD_INP},
#endif /* IGNBRK */
@@ -452,20 +456,21 @@
#define tty__geteightbit(td) (((td)->c_cflag & CSIZE) == CS8)
#define tty__cooked_mode(td) ((td)->c_lflag & ICANON)
-private int tty_getty(EditLine *, struct termios *);
-private int tty_setty(EditLine *, int, const struct termios *);
-private int tty__getcharindex(int);
-private void tty__getchar(struct termios *, unsigned char *);
-private void tty__setchar(struct termios *, unsigned char *);
-private speed_t tty__getspeed(struct termios *);
-private int tty_setup(EditLine *);
+static int tty_getty(EditLine *, struct termios *);
+static int tty_setty(EditLine *, int, const struct termios *);
+static int tty__getcharindex(int);
+static void tty__getchar(struct termios *, unsigned char *);
+static void tty__setchar(struct termios *, unsigned char *);
+static speed_t tty__getspeed(struct termios *);
+static int tty_setup(EditLine *);
+static void tty_setup_flags(EditLine *, struct termios *, int);
#define t_qu t_ts
/* tty_getty():
* Wrapper for tcgetattr to handle EINTR
*/
-private int
+static int
tty_getty(EditLine *el, struct termios *t)
{
int rv;
@@ -477,7 +482,7 @@
/* tty_setty():
* Wrapper for tcsetattr to handle EINTR
*/
-private int
+static int
tty_setty(EditLine *el, int action, const struct termios *t)
{
int rv;
@@ -489,14 +494,17 @@
/* tty_setup():
* Get the tty parameters and initialize the editing state
*/
-private int
+static int
tty_setup(EditLine *el)
{
- int rst = 1;
+ int rst = (el->el_flags & NO_RESET) == 0;
if (el->el_flags & EDIT_DISABLED)
return 0;
+ if (el->el_tty.t_initialized)
+ return -1;
+
if (!isatty(el->el_outfd)) {
#ifdef DEBUG_TTY
(void) fprintf(el->el_errfile, "%s: isatty: %s\n", __func__,
@@ -517,17 +525,7 @@
el->el_tty.t_tabs = tty__gettabs(&el->el_tty.t_ex);
el->el_tty.t_eight = tty__geteightbit(&el->el_tty.t_ex);
- el->el_tty.t_ex.c_iflag &= ~el->el_tty.t_t[EX_IO][MD_INP].t_clrmask;
- el->el_tty.t_ex.c_iflag |= el->el_tty.t_t[EX_IO][MD_INP].t_setmask;
-
- el->el_tty.t_ex.c_oflag &= ~el->el_tty.t_t[EX_IO][MD_OUT].t_clrmask;
- el->el_tty.t_ex.c_oflag |= el->el_tty.t_t[EX_IO][MD_OUT].t_setmask;
-
- el->el_tty.t_ex.c_cflag &= ~el->el_tty.t_t[EX_IO][MD_CTL].t_clrmask;
- el->el_tty.t_ex.c_cflag |= el->el_tty.t_t[EX_IO][MD_CTL].t_setmask;
-
- el->el_tty.t_ex.c_lflag &= ~el->el_tty.t_t[EX_IO][MD_LIN].t_clrmask;
- el->el_tty.t_ex.c_lflag |= el->el_tty.t_t[EX_IO][MD_LIN].t_setmask;
+ tty_setup_flags(el, &el->el_tty.t_ex, EX_IO);
/*
* Reset the tty chars to reasonable defaults
@@ -562,29 +560,21 @@
}
}
- el->el_tty.t_ed.c_iflag &= ~el->el_tty.t_t[ED_IO][MD_INP].t_clrmask;
- el->el_tty.t_ed.c_iflag |= el->el_tty.t_t[ED_IO][MD_INP].t_setmask;
-
- el->el_tty.t_ed.c_oflag &= ~el->el_tty.t_t[ED_IO][MD_OUT].t_clrmask;
- el->el_tty.t_ed.c_oflag |= el->el_tty.t_t[ED_IO][MD_OUT].t_setmask;
-
- el->el_tty.t_ed.c_cflag &= ~el->el_tty.t_t[ED_IO][MD_CTL].t_clrmask;
- el->el_tty.t_ed.c_cflag |= el->el_tty.t_t[ED_IO][MD_CTL].t_setmask;
-
- el->el_tty.t_ed.c_lflag &= ~el->el_tty.t_t[ED_IO][MD_LIN].t_clrmask;
- el->el_tty.t_ed.c_lflag |= el->el_tty.t_t[ED_IO][MD_LIN].t_setmask;
+ tty_setup_flags(el, &el->el_tty.t_ed, ED_IO);
tty__setchar(&el->el_tty.t_ed, el->el_tty.t_c[ED_IO]);
tty_bind_char(el, 1);
+ el->el_tty.t_initialized = 1;
return 0;
}
-protected int
+libedit_private int
tty_init(EditLine *el)
{
el->el_tty.t_mode = EX_IO;
el->el_tty.t_vdisable = _POSIX_VDISABLE;
+ el->el_tty.t_initialized = 0;
(void) memcpy(el->el_tty.t_t, ttyperm, sizeof(ttyperm_t));
(void) memcpy(el->el_tty.t_c, ttychar, sizeof(ttychar_t));
return tty_setup(el);
@@ -594,11 +584,18 @@
/* tty_end():
* Restore the tty to its original settings
*/
-protected void
+libedit_private void
/*ARGSUSED*/
-tty_end(EditLine *el)
+tty_end(EditLine *el, int how)
{
- if (tty_setty(el, TCSAFLUSH, &el->el_tty.t_or) == -1) {
+ if (el->el_flags & EDIT_DISABLED)
+ return;
+
+ if (!el->el_tty.t_initialized)
+ return;
+
+ if (tty_setty(el, how, &el->el_tty.t_or) == -1)
+ {
#ifdef DEBUG_TTY
(void) fprintf(el->el_errfile,
"%s: tty_setty: %s\n", __func__, strerror(errno));
@@ -610,7 +607,7 @@
/* tty__getspeed():
* Get the tty speed
*/
-private speed_t
+static speed_t
tty__getspeed(struct termios *td)
{
speed_t spd;
@@ -623,7 +620,7 @@
/* tty__getspeed():
* Return the index of the asked char in the c_cc array
*/
-private int
+static int
tty__getcharindex(int i)
{
switch (i) {
@@ -731,7 +728,7 @@
/* tty__getchar():
* Get the tty characters
*/
-private void
+static void
tty__getchar(struct termios *td, unsigned char *s)
{
@@ -813,7 +810,7 @@
/* tty__setchar():
* Set the tty characters
*/
-private void
+static void
tty__setchar(struct termios *td, unsigned char *s)
{
@@ -895,13 +892,13 @@
/* tty_bind_char():
* Rebind the editline functions
*/
-protected void
+libedit_private void
tty_bind_char(EditLine *el, int force)
{
unsigned char *t_n = el->el_tty.t_c[ED_IO];
unsigned char *t_o = el->el_tty.t_ed.c_cc;
- Char new[2], old[2];
+ wchar_t new[2], old[2];
const ttymap_t *tp;
el_action_t *map, *alt;
const el_action_t *dmap, *dalt;
@@ -917,31 +914,85 @@
dalt = NULL;
}
- for (tp = tty_map; tp->nch != (Int)-1; tp++) {
- new[0] = t_n[tp->nch];
- old[0] = t_o[tp->och];
+ for (tp = tty_map; tp->nch != (wint_t)-1; tp++) {
+ new[0] = (wchar_t)t_n[tp->nch];
+ old[0] = (wchar_t)t_o[tp->och];
if (new[0] == old[0] && !force)
continue;
/* Put the old default binding back, and set the new binding */
keymacro_clear(el, map, old);
- map[UC(old[0])] = dmap[UC(old[0])];
+ map[(unsigned char)old[0]] = dmap[(unsigned char)old[0]];
keymacro_clear(el, map, new);
/* MAP_VI == 1, MAP_EMACS == 0... */
- map[UC(new[0])] = tp->bind[el->el_map.type];
+ map[(unsigned char)new[0]] = tp->bind[el->el_map.type];
if (dalt) {
keymacro_clear(el, alt, old);
- alt[UC(old[0])] = dalt[UC(old[0])];
+ alt[(unsigned char)old[0]] =
+ dalt[(unsigned char)old[0]];
keymacro_clear(el, alt, new);
- alt[UC(new[0])] = tp->bind[el->el_map.type + 1];
+ alt[(unsigned char)new[0]] =
+ tp->bind[el->el_map.type + 1];
}
}
}
+static tcflag_t *
+tty__get_flag(struct termios *t, int kind) {
+ switch (kind) {
+ case MD_INP:
+ return &t->c_iflag;
+ case MD_OUT:
+ return &t->c_oflag;
+ case MD_CTL:
+ return &t->c_cflag;
+ case MD_LIN:
+ return &t->c_lflag;
+ default:
+ abort();
+ /*NOTREACHED*/
+ }
+}
+
+
+static tcflag_t
+tty_update_flag(EditLine *el, tcflag_t f, int mode, int kind)
+{
+ f &= ~el->el_tty.t_t[mode][kind].t_clrmask;
+ f |= el->el_tty.t_t[mode][kind].t_setmask;
+ return f;
+}
+
+
+static void
+tty_update_flags(EditLine *el, int kind)
+{
+ tcflag_t *tt, *ed, *ex;
+ tt = tty__get_flag(&el->el_tty.t_ts, kind);
+ ed = tty__get_flag(&el->el_tty.t_ed, kind);
+ ex = tty__get_flag(&el->el_tty.t_ex, kind);
+
+ if (*tt != *ex && (kind != MD_CTL || *tt != *ed)) {
+ *ed = tty_update_flag(el, *tt, ED_IO, kind);
+ *ex = tty_update_flag(el, *tt, EX_IO, kind);
+ }
+}
+
+
+static void
+tty_update_char(EditLine *el, int mode, int c) {
+ if (!((el->el_tty.t_t[mode][MD_CHAR].t_setmask & C_SH(c)))
+ && (el->el_tty.t_c[TS_IO][c] != el->el_tty.t_c[EX_IO][c]))
+ el->el_tty.t_c[mode][c] = el->el_tty.t_c[TS_IO][c];
+ if (el->el_tty.t_t[mode][MD_CHAR].t_clrmask & C_SH(c))
+ el->el_tty.t_c[mode][c] = el->el_tty.t_vdisable;
+}
+
+
/* tty_rawmode():
- * Set terminal into 1 character at a time mode.
+ * Set terminal into 1 character at a time mode.
*/
-protected int
+libedit_private int
tty_rawmode(EditLine *el)
{
@@ -973,112 +1024,42 @@
(void) cfsetospeed(&el->el_tty.t_ed, el->el_tty.t_speed);
}
if (tty__cooked_mode(&el->el_tty.t_ts)) {
- if (el->el_tty.t_ts.c_cflag != el->el_tty.t_ex.c_cflag) {
- el->el_tty.t_ex.c_cflag =
- el->el_tty.t_ts.c_cflag;
- el->el_tty.t_ex.c_cflag &=
- ~el->el_tty.t_t[EX_IO][MD_CTL].t_clrmask;
- el->el_tty.t_ex.c_cflag |=
- el->el_tty.t_t[EX_IO][MD_CTL].t_setmask;
+ int i;
- el->el_tty.t_ed.c_cflag =
- el->el_tty.t_ts.c_cflag;
- el->el_tty.t_ed.c_cflag &=
- ~el->el_tty.t_t[ED_IO][MD_CTL].t_clrmask;
- el->el_tty.t_ed.c_cflag |=
- el->el_tty.t_t[ED_IO][MD_CTL].t_setmask;
- }
- if ((el->el_tty.t_ts.c_lflag != el->el_tty.t_ex.c_lflag) &&
- (el->el_tty.t_ts.c_lflag != el->el_tty.t_ed.c_lflag)) {
- el->el_tty.t_ex.c_lflag =
- el->el_tty.t_ts.c_lflag;
- el->el_tty.t_ex.c_lflag &=
- ~el->el_tty.t_t[EX_IO][MD_LIN].t_clrmask;
- el->el_tty.t_ex.c_lflag |=
- el->el_tty.t_t[EX_IO][MD_LIN].t_setmask;
+ for (i = MD_INP; i <= MD_LIN; i++)
+ tty_update_flags(el, i);
- el->el_tty.t_ed.c_lflag =
- el->el_tty.t_ts.c_lflag;
- el->el_tty.t_ed.c_lflag &=
- ~el->el_tty.t_t[ED_IO][MD_LIN].t_clrmask;
- el->el_tty.t_ed.c_lflag |=
- el->el_tty.t_t[ED_IO][MD_LIN].t_setmask;
- }
- if ((el->el_tty.t_ts.c_iflag != el->el_tty.t_ex.c_iflag) &&
- (el->el_tty.t_ts.c_iflag != el->el_tty.t_ed.c_iflag)) {
- el->el_tty.t_ex.c_iflag =
- el->el_tty.t_ts.c_iflag;
- el->el_tty.t_ex.c_iflag &=
- ~el->el_tty.t_t[EX_IO][MD_INP].t_clrmask;
- el->el_tty.t_ex.c_iflag |=
- el->el_tty.t_t[EX_IO][MD_INP].t_setmask;
-
- el->el_tty.t_ed.c_iflag =
- el->el_tty.t_ts.c_iflag;
- el->el_tty.t_ed.c_iflag &=
- ~el->el_tty.t_t[ED_IO][MD_INP].t_clrmask;
- el->el_tty.t_ed.c_iflag |=
- el->el_tty.t_t[ED_IO][MD_INP].t_setmask;
- }
- if ((el->el_tty.t_ts.c_oflag != el->el_tty.t_ex.c_oflag) &&
- (el->el_tty.t_ts.c_oflag != el->el_tty.t_ed.c_oflag)) {
- el->el_tty.t_ex.c_oflag =
- el->el_tty.t_ts.c_oflag;
- el->el_tty.t_ex.c_oflag &=
- ~el->el_tty.t_t[EX_IO][MD_OUT].t_clrmask;
- el->el_tty.t_ex.c_oflag |=
- el->el_tty.t_t[EX_IO][MD_OUT].t_setmask;
-
- el->el_tty.t_ed.c_oflag =
- el->el_tty.t_ts.c_oflag;
- el->el_tty.t_ed.c_oflag &=
- ~el->el_tty.t_t[ED_IO][MD_OUT].t_clrmask;
- el->el_tty.t_ed.c_oflag |=
- el->el_tty.t_t[ED_IO][MD_OUT].t_setmask;
- }
if (tty__gettabs(&el->el_tty.t_ex) == 0)
el->el_tty.t_tabs = 0;
else
el->el_tty.t_tabs = EL_CAN_TAB ? 1 : 0;
- {
- int i;
+ tty__getchar(&el->el_tty.t_ts, el->el_tty.t_c[TS_IO]);
+ /*
+ * Check if the user made any changes.
+ * If he did, then propagate the changes to the
+ * edit and execute data structures.
+ */
+ for (i = 0; i < C_NCC; i++)
+ if (el->el_tty.t_c[TS_IO][i] !=
+ el->el_tty.t_c[EX_IO][i])
+ break;
- tty__getchar(&el->el_tty.t_ts, el->el_tty.t_c[TS_IO]);
+ if (i != C_NCC) {
/*
- * Check if the user made any changes.
- * If he did, then propagate the changes to the
- * edit and execute data structures.
- */
+ * Propagate changes only to the unlibedit_private
+ * chars that have been modified just now.
+ */
for (i = 0; i < C_NCC; i++)
- if (el->el_tty.t_c[TS_IO][i] !=
- el->el_tty.t_c[EX_IO][i])
- break;
+ tty_update_char(el, ED_IO, i);
- if (i != C_NCC) {
- /*
- * Propagate changes only to the unprotected
- * chars that have been modified just now.
- */
- for (i = 0; i < C_NCC; i++) {
- if (!((el->el_tty.t_t[ED_IO][MD_CHAR].t_setmask & C_SH(i)))
- && (el->el_tty.t_c[TS_IO][i] != el->el_tty.t_c[EX_IO][i]))
- el->el_tty.t_c[ED_IO][i] = el->el_tty.t_c[TS_IO][i];
- if (el->el_tty.t_t[ED_IO][MD_CHAR].t_clrmask & C_SH(i))
- el->el_tty.t_c[ED_IO][i] = el->el_tty.t_vdisable;
- }
- tty_bind_char(el, 0);
- tty__setchar(&el->el_tty.t_ed, el->el_tty.t_c[ED_IO]);
+ tty_bind_char(el, 0);
+ tty__setchar(&el->el_tty.t_ed, el->el_tty.t_c[ED_IO]);
- for (i = 0; i < C_NCC; i++) {
- if (!((el->el_tty.t_t[EX_IO][MD_CHAR].t_setmask & C_SH(i)))
- && (el->el_tty.t_c[TS_IO][i] != el->el_tty.t_c[EX_IO][i]))
- el->el_tty.t_c[EX_IO][i] = el->el_tty.t_c[TS_IO][i];
- if (el->el_tty.t_t[EX_IO][MD_CHAR].t_clrmask & C_SH(i))
- el->el_tty.t_c[EX_IO][i] = el->el_tty.t_vdisable;
- }
- tty__setchar(&el->el_tty.t_ex, el->el_tty.t_c[EX_IO]);
- }
+ for (i = 0; i < C_NCC; i++)
+ tty_update_char(el, EX_IO, i);
+
+ tty__setchar(&el->el_tty.t_ex, el->el_tty.t_c[EX_IO]);
}
}
if (tty_setty(el, TCSADRAIN, &el->el_tty.t_ed) == -1) {
@@ -1096,7 +1077,7 @@
/* tty_cookedmode():
* Set the tty back to normal mode
*/
-protected int
+libedit_private int
tty_cookedmode(EditLine *el)
{ /* set tty in normal setup */
@@ -1121,7 +1102,7 @@
/* tty_quotemode():
* Turn on quote mode
*/
-protected int
+libedit_private int
tty_quotemode(EditLine *el)
{
if (el->el_tty.t_mode == QU_IO)
@@ -1129,17 +1110,7 @@
el->el_tty.t_qu = el->el_tty.t_ed;
- el->el_tty.t_qu.c_iflag &= ~el->el_tty.t_t[QU_IO][MD_INP].t_clrmask;
- el->el_tty.t_qu.c_iflag |= el->el_tty.t_t[QU_IO][MD_INP].t_setmask;
-
- el->el_tty.t_qu.c_oflag &= ~el->el_tty.t_t[QU_IO][MD_OUT].t_clrmask;
- el->el_tty.t_qu.c_oflag |= el->el_tty.t_t[QU_IO][MD_OUT].t_setmask;
-
- el->el_tty.t_qu.c_cflag &= ~el->el_tty.t_t[QU_IO][MD_CTL].t_clrmask;
- el->el_tty.t_qu.c_cflag |= el->el_tty.t_t[QU_IO][MD_CTL].t_setmask;
-
- el->el_tty.t_qu.c_lflag &= ~el->el_tty.t_t[QU_IO][MD_LIN].t_clrmask;
- el->el_tty.t_qu.c_lflag |= el->el_tty.t_t[QU_IO][MD_LIN].t_setmask;
+ tty_setup_flags(el, &el->el_tty.t_qu, QU_IO);
if (tty_setty(el, TCSADRAIN, &el->el_tty.t_qu) == -1) {
#ifdef DEBUG_TTY
@@ -1156,7 +1127,7 @@
/* tty_noquotemode():
* Turn off quote mode
*/
-protected int
+libedit_private int
tty_noquotemode(EditLine *el)
{
@@ -1177,14 +1148,15 @@
/* tty_stty():
* Stty builtin
*/
-protected int
+libedit_private int
/*ARGSUSED*/
-tty_stty(EditLine *el, int argc __attribute__((__unused__)), const Char **argv)
+tty_stty(EditLine *el, int argc __attribute__((__unused__)),
+ const wchar_t **argv)
{
const ttymodes_t *m;
char x;
int aflag = 0;
- const Char *s, *d;
+ const wchar_t *s, *d;
char name[EL_BUFSIZ];
struct termios *tios = &el->el_tty.t_ex;
int z = EX_IO;
@@ -1217,8 +1189,8 @@
break;
default:
(void) fprintf(el->el_errfile,
- "%s: Unknown switch `%c'.\n",
- name, argv[0][1]);
+ "%s: Unknown switch `%lc'.\n",
+ name, (wint_t)argv[0][1]);
return -1;
}
@@ -1268,7 +1240,7 @@
return 0;
}
while (argv && (s = *argv++)) {
- const Char *p;
+ const wchar_t *p;
switch (*s) {
case '+':
case '-':
@@ -1279,7 +1251,7 @@
break;
}
d = s;
- p = Strchr(s, '=');
+ p = wcschr(s, L'=');
for (m = ttymodes; m->m_name; m++)
if ((p ? strncmp(m->m_name, ct_encode_string(d,
&el->el_scratch), (size_t)(p - d)) :
@@ -1290,7 +1262,7 @@
if (!m->m_name) {
(void) fprintf(el->el_errfile,
- "%s: Invalid argument `" FSTR "'.\n", name, d);
+ "%s: Invalid argument `%ls'.\n", name, d);
return -1;
}
if (p) {
@@ -1320,6 +1292,7 @@
}
}
+ tty_setup_flags(el, tios, z);
if (el->el_tty.t_mode == z) {
if (tty_setty(el, TCSADRAIN, tios) == -1) {
#ifdef DEBUG_TTY
@@ -1338,7 +1311,7 @@
/* tty_printchar():
* DEbugging routine to print the tty characters
*/
-private void
+static void
tty_printchar(EditLine *el, unsigned char *s)
{
ttyperm_t *m;
@@ -1357,3 +1330,44 @@
(void) fprintf(el->el_errfile, "\n");
}
#endif /* notyet */
+
+
+static void
+tty_setup_flags(EditLine *el, struct termios *tios, int mode)
+{
+ int kind;
+ for (kind = MD_INP; kind <= MD_LIN; kind++) {
+ tcflag_t *f = tty__get_flag(tios, kind);
+ *f = tty_update_flag(el, *f, mode, kind);
+ }
+}
+
+libedit_private int
+tty_get_signal_character(EditLine *el, int sig)
+{
+#ifdef ECHOCTL
+ tcflag_t *ed = tty__get_flag(&el->el_tty.t_ed, MD_INP);
+ if ((*ed & ECHOCTL) == 0)
+ return -1;
+#endif
+ switch (sig) {
+#ifdef SIGINT
+ case SIGINT:
+ return el->el_tty.t_c[ED_IO][VINTR];
+#endif
+#ifdef SIGQUIT
+ case SIGQUIT:
+ return el->el_tty.t_c[ED_IO][VQUIT];
+#endif
+#ifdef SIGINFO
+ case SIGINFO:
+ return el->el_tty.t_c[ED_IO][VSTATUS];
+#endif
+#ifdef SIGTSTP
+ case SIGTSTP:
+ return el->el_tty.t_c[ED_IO][VSUSP];
+#endif
+ default:
+ return -1;
+ }
+}
diff --git a/src/tty.h b/src/tty.h
index 7bdb0b2..6430919 100644
--- a/src/tty.h
+++ b/src/tty.h
@@ -1,4 +1,4 @@
-/* $NetBSD: tty.h,v 1.14 2012/05/15 15:59:01 christos Exp $ */
+/* $NetBSD: tty.h,v 1.23 2018/12/02 16:58:13 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -40,8 +40,6 @@
#ifndef _h_el_tty
#define _h_el_tty
-#include "sys.h"
-#include "histedit.h"
#include <termios.h>
#include <unistd.h>
@@ -442,6 +440,7 @@
#define QU_IO 2 /* used only for quoted chars */
#define NN_IO 3 /* The number of entries */
+/* Don't re-order */
#define MD_INP 0
#define MD_OUT 1
#define MD_CTL 2
@@ -457,14 +456,15 @@
typedef unsigned char ttychar_t[NN_IO][C_NCC];
-protected int tty_init(EditLine *);
-protected void tty_end(EditLine *);
-protected int tty_stty(EditLine *, int, const Char **);
-protected int tty_rawmode(EditLine *);
-protected int tty_cookedmode(EditLine *);
-protected int tty_quotemode(EditLine *);
-protected int tty_noquotemode(EditLine *);
-protected void tty_bind_char(EditLine *, int);
+libedit_private int tty_init(EditLine *);
+libedit_private void tty_end(EditLine *, int);
+libedit_private int tty_stty(EditLine *, int, const wchar_t **);
+libedit_private int tty_rawmode(EditLine *);
+libedit_private int tty_cookedmode(EditLine *);
+libedit_private int tty_quotemode(EditLine *);
+libedit_private int tty_noquotemode(EditLine *);
+libedit_private void tty_bind_char(EditLine *, int);
+libedit_private int tty_get_signal_character(EditLine *, int);
typedef struct {
ttyperm_t t_t;
@@ -473,8 +473,9 @@
int t_tabs;
int t_eight;
speed_t t_speed;
- int t_mode;
+ unsigned char t_mode;
unsigned char t_vdisable;
+ unsigned char t_initialized;
} el_tty_t;
diff --git a/src/unvis.c b/src/unvis.c
index 4bbc7bc..d2c65aa 100644
--- a/src/unvis.c
+++ b/src/unvis.c
@@ -1,4 +1,4 @@
-/* $NetBSD: unvis.c,v 1.41 2012/12/15 04:29:53 matt Exp $ */
+/* $NetBSD: unvis.c,v 1.44 2014/09/26 15:43:36 roy Exp $ */
/*-
* Copyright (c) 1989, 1993
@@ -34,7 +34,7 @@
#if 0
static char sccsid[] = "@(#)unvis.c 8.1 (Berkeley) 6/4/93";
#else
-__RCSID("$NetBSD: unvis.c,v 1.41 2012/12/15 04:29:53 matt Exp $");
+__RCSID("$NetBSD: unvis.c,v 1.44 2014/09/26 15:43:36 roy Exp $");
#endif
#endif /* LIBC_SCCS and not lint */
@@ -314,6 +314,12 @@
*/
*astate = SS(0, S_GROUND);
return UNVIS_NOCHAR;
+ default:
+ if (isgraph(c)) {
+ *cp = c;
+ *astate = SS(0, S_GROUND);
+ return UNVIS_VALID;
+ }
}
goto bad;
diff --git a/src/vi.c b/src/vi.c
index c918acc..0c37bfb 100644
--- a/src/vi.c
+++ b/src/vi.c
@@ -1,4 +1,4 @@
-/* $NetBSD: vi.c,v 1.43 2012/01/16 14:57:45 christos Exp $ */
+/* $NetBSD: vi.c,v 1.62 2016/05/09 21:46:56 christos Exp $ */
/*-
* Copyright (c) 1992, 1993
@@ -33,37 +33,43 @@
*/
#include "config.h"
-#include <stdlib.h>
-#include <unistd.h>
-#include <limits.h>
-#include <sys/wait.h>
-
#if !defined(lint) && !defined(SCCSID)
#if 0
static char sccsid[] = "@(#)vi.c 8.1 (Berkeley) 6/4/93";
#else
-__RCSID("$NetBSD: vi.c,v 1.43 2012/01/16 14:57:45 christos Exp $");
+__RCSID("$NetBSD: vi.c,v 1.62 2016/05/09 21:46:56 christos Exp $");
#endif
#endif /* not lint && not SCCSID */
/*
* vi.c: Vi mode commands.
*/
-#include "el.h"
+#include <sys/wait.h>
+#include <ctype.h>
+#include <limits.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
-private el_action_t cv_action(EditLine *, Int);
-private el_action_t cv_paste(EditLine *, Int);
+#include "el.h"
+#include "common.h"
+#include "emacs.h"
+#include "fcns.h"
+#include "vi.h"
+
+static el_action_t cv_action(EditLine *, wint_t);
+static el_action_t cv_paste(EditLine *, wint_t);
/* cv_action():
* Handle vi actions.
*/
-private el_action_t
-cv_action(EditLine *el, Int c)
+static el_action_t
+cv_action(EditLine *el, wint_t c)
{
if (el->el_chared.c_vcmd.action != NOP) {
/* 'cc', 'dd' and (possibly) friends */
- if (c != (Int)el->el_chared.c_vcmd.action)
+ if (c != (wint_t)el->el_chared.c_vcmd.action)
return CC_ERROR;
if (!(c & YANK))
@@ -89,8 +95,8 @@
/* cv_paste():
* Paste previous deletion before or after the cursor
*/
-private el_action_t
-cv_paste(EditLine *el, Int c)
+static el_action_t
+cv_paste(EditLine *el, wint_t c)
{
c_kill_t *k = &el->el_chared.c_kill;
size_t len = (size_t)(k->last - k->buf);
@@ -98,7 +104,8 @@
if (k->buf == NULL || len == 0)
return CC_ERROR;
#ifdef DEBUG_PASTE
- (void) fprintf(el->el_errfile, "Paste: \"%.*s\"\n", (int)len, k->buf);
+ (void) fprintf(el->el_errfile, "Paste: \"%.*ls\"\n", (int)len,
+ k->buf);
#endif
cv_undo(el);
@@ -120,9 +127,9 @@
* Vi paste previous deletion to the right of the cursor
* [p]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_paste_next(EditLine *el, Int c __attribute__((__unused__)))
+vi_paste_next(EditLine *el, wint_t c __attribute__((__unused__)))
{
return cv_paste(el, 0);
@@ -133,9 +140,9 @@
* Vi paste previous deletion to the left of the cursor
* [P]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_paste_prev(EditLine *el, Int c __attribute__((__unused__)))
+vi_paste_prev(EditLine *el, wint_t c __attribute__((__unused__)))
{
return cv_paste(el, 1);
@@ -146,9 +153,9 @@
* Vi move to the previous space delimited word
* [B]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_prev_big_word(EditLine *el, Int c __attribute__((__unused__)))
+vi_prev_big_word(EditLine *el, wint_t c __attribute__((__unused__)))
{
if (el->el_line.cursor == el->el_line.buffer)
@@ -171,9 +178,9 @@
* Vi move to the previous word
* [b]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_prev_word(EditLine *el, Int c __attribute__((__unused__)))
+vi_prev_word(EditLine *el, wint_t c __attribute__((__unused__)))
{
if (el->el_line.cursor == el->el_line.buffer)
@@ -196,9 +203,9 @@
* Vi move to the next space delimited word
* [W]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_next_big_word(EditLine *el, Int c __attribute__((__unused__)))
+vi_next_big_word(EditLine *el, wint_t c __attribute__((__unused__)))
{
if (el->el_line.cursor >= el->el_line.lastchar - 1)
@@ -220,9 +227,9 @@
* Vi move to the next word
* [w]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_next_word(EditLine *el, Int c __attribute__((__unused__)))
+vi_next_word(EditLine *el, wint_t c __attribute__((__unused__)))
{
if (el->el_line.cursor >= el->el_line.lastchar - 1)
@@ -244,8 +251,8 @@
* Vi change case of character under the cursor and advance one character
* [~]
*/
-protected el_action_t
-vi_change_case(EditLine *el, Int c)
+libedit_private el_action_t
+vi_change_case(EditLine *el, wint_t c)
{
int i;
@@ -255,10 +262,10 @@
for (i = 0; i < el->el_state.argument; i++) {
c = *el->el_line.cursor;
- if (Isupper(c))
- *el->el_line.cursor = Tolower(c);
- else if (Islower(c))
- *el->el_line.cursor = Toupper(c);
+ if (iswupper(c))
+ *el->el_line.cursor = towlower(c);
+ else if (iswlower(c))
+ *el->el_line.cursor = towupper(c);
if (++el->el_line.cursor >= el->el_line.lastchar) {
el->el_line.cursor--;
@@ -275,9 +282,9 @@
* Vi change prefix command
* [c]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_change_meta(EditLine *el, Int c __attribute__((__unused__)))
+vi_change_meta(EditLine *el, wint_t c __attribute__((__unused__)))
{
/*
@@ -292,9 +299,9 @@
* Vi enter insert mode at the beginning of line
* [I]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_insert_at_bol(EditLine *el, Int c __attribute__((__unused__)))
+vi_insert_at_bol(EditLine *el, wint_t c __attribute__((__unused__)))
{
el->el_line.cursor = el->el_line.buffer;
@@ -308,9 +315,9 @@
* Vi replace character under the cursor with the next character typed
* [r]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_replace_char(EditLine *el, Int c __attribute__((__unused__)))
+vi_replace_char(EditLine *el, wint_t c __attribute__((__unused__)))
{
if (el->el_line.cursor >= el->el_line.lastchar)
@@ -327,9 +334,9 @@
* Vi enter replace mode
* [R]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_replace_mode(EditLine *el, Int c __attribute__((__unused__)))
+vi_replace_mode(EditLine *el, wint_t c __attribute__((__unused__)))
{
el->el_map.current = el->el_map.key;
@@ -343,9 +350,9 @@
* Vi replace character under the cursor and enter insert mode
* [s]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_substitute_char(EditLine *el, Int c __attribute__((__unused__)))
+vi_substitute_char(EditLine *el, wint_t c __attribute__((__unused__)))
{
c_delafter(el, el->el_state.argument);
@@ -358,9 +365,9 @@
* Vi substitute entire line
* [S]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_substitute_line(EditLine *el, Int c __attribute__((__unused__)))
+vi_substitute_line(EditLine *el, wint_t c __attribute__((__unused__)))
{
cv_undo(el);
@@ -376,9 +383,9 @@
* Vi change to end of line
* [C]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_change_to_eol(EditLine *el, Int c __attribute__((__unused__)))
+vi_change_to_eol(EditLine *el, wint_t c __attribute__((__unused__)))
{
cv_undo(el);
@@ -394,9 +401,9 @@
* Vi enter insert mode
* [i]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_insert(EditLine *el, Int c __attribute__((__unused__)))
+vi_insert(EditLine *el, wint_t c __attribute__((__unused__)))
{
el->el_map.current = el->el_map.key;
@@ -409,9 +416,9 @@
* Vi enter insert mode after the cursor
* [a]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_add(EditLine *el, Int c __attribute__((__unused__)))
+vi_add(EditLine *el, wint_t c __attribute__((__unused__)))
{
int ret;
@@ -434,9 +441,9 @@
* Vi enter insert mode at end of line
* [A]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_add_at_eol(EditLine *el, Int c __attribute__((__unused__)))
+vi_add_at_eol(EditLine *el, wint_t c __attribute__((__unused__)))
{
el->el_map.current = el->el_map.key;
@@ -450,9 +457,9 @@
* Vi delete prefix command
* [d]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_delete_meta(EditLine *el, Int c __attribute__((__unused__)))
+vi_delete_meta(EditLine *el, wint_t c __attribute__((__unused__)))
{
return cv_action(el, DELETE);
@@ -463,9 +470,9 @@
* Vi move to the end of the current space delimited word
* [E]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_end_big_word(EditLine *el, Int c __attribute__((__unused__)))
+vi_end_big_word(EditLine *el, wint_t c __attribute__((__unused__)))
{
if (el->el_line.cursor == el->el_line.lastchar)
@@ -487,9 +494,9 @@
* Vi move to the end of the current word
* [e]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_end_word(EditLine *el, Int c __attribute__((__unused__)))
+vi_end_word(EditLine *el, wint_t c __attribute__((__unused__)))
{
if (el->el_line.cursor == el->el_line.lastchar)
@@ -511,9 +518,9 @@
* Vi undo last change
* [u]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_undo(EditLine *el, Int c __attribute__((__unused__)))
+vi_undo(EditLine *el, wint_t c __attribute__((__unused__)))
{
c_undo_t un = el->el_chared.c_undo;
@@ -538,9 +545,9 @@
* Vi enter command mode (use alternative key bindings)
* [<ESC>]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_command_mode(EditLine *el, Int c __attribute__((__unused__)))
+vi_command_mode(EditLine *el, wint_t c __attribute__((__unused__)))
{
/* [Esc] cancels pending action */
@@ -563,8 +570,8 @@
* Vi move to the beginning of line
* [0]
*/
-protected el_action_t
-vi_zero(EditLine *el, Int c)
+libedit_private el_action_t
+vi_zero(EditLine *el, wint_t c)
{
if (el->el_state.doingarg)
@@ -580,12 +587,12 @@
/* vi_delete_prev_char():
- * Vi move to previous character (backspace)
+ * Vi move to previous character (backspace)
* [^H] in insert mode only
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_delete_prev_char(EditLine *el, Int c __attribute__((__unused__)))
+vi_delete_prev_char(EditLine *el, wint_t c __attribute__((__unused__)))
{
if (el->el_line.cursor <= el->el_line.buffer)
@@ -601,9 +608,9 @@
* Vi list choices for completion or indicate end of file if empty line
* [^D]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_list_or_eof(EditLine *el, Int c)
+vi_list_or_eof(EditLine *el, wint_t c)
{
if (el->el_line.cursor == el->el_line.lastchar) {
@@ -638,11 +645,11 @@
* Vi cut from beginning of line to cursor
* [^U]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_kill_line_prev(EditLine *el, Int c __attribute__((__unused__)))
+vi_kill_line_prev(EditLine *el, wint_t c __attribute__((__unused__)))
{
- Char *kp, *cp;
+ wchar_t *kp, *cp;
cp = el->el_line.buffer;
kp = el->el_chared.c_kill.buf;
@@ -659,9 +666,9 @@
* Vi search history previous
* [?]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_search_prev(EditLine *el, Int c __attribute__((__unused__)))
+vi_search_prev(EditLine *el, wint_t c __attribute__((__unused__)))
{
return cv_search(el, ED_SEARCH_PREV_HISTORY);
@@ -672,9 +679,9 @@
* Vi search history next
* [/]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_search_next(EditLine *el, Int c __attribute__((__unused__)))
+vi_search_next(EditLine *el, wint_t c __attribute__((__unused__)))
{
return cv_search(el, ED_SEARCH_NEXT_HISTORY);
@@ -685,9 +692,9 @@
* Vi repeat current search in the same search direction
* [n]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_repeat_search_next(EditLine *el, Int c __attribute__((__unused__)))
+vi_repeat_search_next(EditLine *el, wint_t c __attribute__((__unused__)))
{
if (el->el_search.patlen == 0)
@@ -702,8 +709,8 @@
* [N]
*/
/*ARGSUSED*/
-protected el_action_t
-vi_repeat_search_prev(EditLine *el, Int c __attribute__((__unused__)))
+libedit_private el_action_t
+vi_repeat_search_prev(EditLine *el, wint_t c __attribute__((__unused__)))
{
if (el->el_search.patlen == 0)
@@ -719,9 +726,9 @@
* Vi move to the character specified next
* [f]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_next_char(EditLine *el, Int c __attribute__((__unused__)))
+vi_next_char(EditLine *el, wint_t c __attribute__((__unused__)))
{
return cv_csearch(el, CHAR_FWD, -1, el->el_state.argument, 0);
}
@@ -731,9 +738,9 @@
* Vi move to the character specified previous
* [F]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_prev_char(EditLine *el, Int c __attribute__((__unused__)))
+vi_prev_char(EditLine *el, wint_t c __attribute__((__unused__)))
{
return cv_csearch(el, CHAR_BACK, -1, el->el_state.argument, 0);
}
@@ -743,9 +750,9 @@
* Vi move up to the character specified next
* [t]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_to_next_char(EditLine *el, Int c __attribute__((__unused__)))
+vi_to_next_char(EditLine *el, wint_t c __attribute__((__unused__)))
{
return cv_csearch(el, CHAR_FWD, -1, el->el_state.argument, 1);
}
@@ -755,9 +762,9 @@
* Vi move up to the character specified previous
* [T]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_to_prev_char(EditLine *el, Int c __attribute__((__unused__)))
+vi_to_prev_char(EditLine *el, wint_t c __attribute__((__unused__)))
{
return cv_csearch(el, CHAR_BACK, -1, el->el_state.argument, 1);
}
@@ -767,9 +774,9 @@
* Vi repeat current character search in the same search direction
* [;]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_repeat_next_char(EditLine *el, Int c __attribute__((__unused__)))
+vi_repeat_next_char(EditLine *el, wint_t c __attribute__((__unused__)))
{
return cv_csearch(el, el->el_search.chadir, el->el_search.chacha,
@@ -781,9 +788,9 @@
* Vi repeat current character search in the opposite search direction
* [,]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_repeat_prev_char(EditLine *el, Int c __attribute__((__unused__)))
+vi_repeat_prev_char(EditLine *el, wint_t c __attribute__((__unused__)))
{
el_action_t r;
int dir = el->el_search.chadir;
@@ -799,22 +806,22 @@
* Vi go to matching () {} or []
* [%]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_match(EditLine *el, Int c __attribute__((__unused__)))
+vi_match(EditLine *el, wint_t c __attribute__((__unused__)))
{
- const Char match_chars[] = STR("()[]{}");
- Char *cp;
+ const wchar_t match_chars[] = L"()[]{}";
+ wchar_t *cp;
size_t delta, i, count;
- Char o_ch, c_ch;
+ wchar_t o_ch, c_ch;
*el->el_line.lastchar = '\0'; /* just in case */
- i = Strcspn(el->el_line.cursor, match_chars);
+ i = wcscspn(el->el_line.cursor, match_chars);
o_ch = el->el_line.cursor[i];
if (o_ch == 0)
return CC_ERROR;
- delta = (size_t)(Strchr(match_chars, o_ch) - match_chars);
+ delta = (size_t)(wcschr(match_chars, o_ch) - match_chars);
c_ch = match_chars[delta ^ 1];
count = 1;
delta = 1 - (delta & 1) * 2;
@@ -846,9 +853,9 @@
* Vi undo all changes to line
* [U]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_undo_line(EditLine *el, Int c __attribute__((__unused__)))
+vi_undo_line(EditLine *el, wint_t c __attribute__((__unused__)))
{
cv_undo(el);
@@ -860,9 +867,9 @@
* [|]
* NB netbsd vi goes to screen column 'n', posix says nth character
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_to_column(EditLine *el, Int c __attribute__((__unused__)))
+vi_to_column(EditLine *el, wint_t c __attribute__((__unused__)))
{
el->el_line.cursor = el->el_line.buffer;
@@ -874,9 +881,9 @@
* Vi yank to end of line
* [Y]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_yank_end(EditLine *el, Int c __attribute__((__unused__)))
+vi_yank_end(EditLine *el, wint_t c __attribute__((__unused__)))
{
cv_yank(el, el->el_line.cursor,
@@ -888,9 +895,9 @@
* Vi yank
* [y]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_yank(EditLine *el, Int c __attribute__((__unused__)))
+vi_yank(EditLine *el, wint_t c __attribute__((__unused__)))
{
return cv_action(el, YANK);
@@ -900,9 +907,9 @@
* Vi comment out current command
* [#]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_comment_out(EditLine *el, Int c __attribute__((__unused__)))
+vi_comment_out(EditLine *el, wint_t c __attribute__((__unused__)))
{
el->el_line.cursor = el->el_line.buffer;
@@ -918,50 +925,42 @@
* NB: posix implies that we should enter insert mode, however
* this is against historical precedent...
*/
-#ifdef __weak_reference
-__weakref_visible char *my_get_alias_text(const char *)
- __weak_reference(get_alias_text);
-#endif
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_alias(EditLine *el __attribute__((__unused__)), Int c __attribute__((__unused__)))
+vi_alias(EditLine *el, wint_t c __attribute__((__unused__)))
{
-#ifdef __weak_reference
char alias_name[3];
- char *alias_text;
+ const char *alias_text;
- if (my_get_alias_text == 0) {
+ if (el->el_chared.c_aliasfun == NULL)
return CC_ERROR;
- }
alias_name[0] = '_';
alias_name[2] = 0;
if (el_getc(el, &alias_name[1]) != 1)
return CC_ERROR;
- alias_text = my_get_alias_text(alias_name);
+ alias_text = (*el->el_chared.c_aliasfun)(el->el_chared.c_aliasarg,
+ alias_name);
if (alias_text != NULL)
- FUN(el,push)(el, ct_decode_string(alias_text, &el->el_scratch));
+ el_wpush(el, ct_decode_string(alias_text, &el->el_scratch));
return CC_NORM;
-#else
- return CC_ERROR;
-#endif
}
/* vi_to_history_line():
* Vi go to specified history file line.
* [G]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_to_history_line(EditLine *el, Int c __attribute__((__unused__)))
+vi_to_history_line(EditLine *el, wint_t c __attribute__((__unused__)))
{
int sv_event_no = el->el_history.eventno;
el_action_t rval;
if (el->el_history.eventno == 0) {
- (void) Strncpy(el->el_history.buf, el->el_line.buffer,
+ (void) wcsncpy(el->el_history.buf, el->el_line.buffer,
EL_BUFSIZ);
el->el_history.last = el->el_history.buf +
(el->el_line.lastchar - el->el_line.buffer);
@@ -980,7 +979,7 @@
el->el_history.eventno = 1;
if (hist_get(el) == CC_ERROR)
return CC_ERROR;
- el->el_history.eventno = 1 + el->el_history.ev.num
+ el->el_history.eventno = 1 + el->el_history.ev.num
- el->el_state.argument;
if (el->el_history.eventno < 0) {
el->el_history.eventno = sv_event_no;
@@ -997,9 +996,9 @@
* Vi edit history line with vi
* [v]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_histedit(EditLine *el, Int c __attribute__((__unused__)))
+vi_histedit(EditLine *el, wint_t c __attribute__((__unused__)))
{
int fd;
pid_t pid;
@@ -1008,7 +1007,7 @@
char tempfile[] = "/tmp/histedit.XXXXXXXXXX";
char *cp = NULL;
size_t len;
- Char *line = NULL;
+ wchar_t *line = NULL;
if (el->el_state.doingarg) {
if (vi_to_history_line(el, 0) == CC_ERROR)
@@ -1026,9 +1025,9 @@
line = el_malloc(len * sizeof(*line) + 1);
if (line == NULL)
goto error;
- Strncpy(line, el->el_line.buffer, len);
+ wcsncpy(line, el->el_line.buffer, len);
line[len] = '\0';
- ct_wcstombs(cp, line, TMP_BUFSIZ - 1);
+ wcstombs(cp, line, TMP_BUFSIZ - 1);
cp[TMP_BUFSIZ - 1] = '\0';
len = strlen(cp);
write(fd, cp, len);
@@ -1046,12 +1045,12 @@
while (waitpid(pid, &status, 0) != pid)
continue;
lseek(fd, (off_t)0, SEEK_SET);
- st = read(fd, cp, TMP_BUFSIZ);
+ st = read(fd, cp, TMP_BUFSIZ - 1);
if (st > 0) {
- len = (size_t)(el->el_line.lastchar -
- el->el_line.buffer);
- len = ct_mbstowcs(el->el_line.buffer, cp, len);
- if (len > 0 && el->el_line.buffer[len -1] == '\n')
+ cp[st] = '\0';
+ len = (size_t)(el->el_line.limit - el->el_line.buffer);
+ len = mbstowcs(el->el_line.buffer, cp, len);
+ if (len > 0 && el->el_line.buffer[len - 1] == '\n')
--len;
}
else
@@ -1081,33 +1080,33 @@
* Who knows where this one came from!
* '_' in vi means 'entire current line', so 'cc' is a synonym for 'c_'
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_history_word(EditLine *el, Int c __attribute__((__unused__)))
+vi_history_word(EditLine *el, wint_t c __attribute__((__unused__)))
{
- const Char *wp = HIST_FIRST(el);
- const Char *wep, *wsp;
+ const wchar_t *wp = HIST_FIRST(el);
+ const wchar_t *wep, *wsp;
int len;
- Char *cp;
- const Char *lim;
+ wchar_t *cp;
+ const wchar_t *lim;
if (wp == NULL)
return CC_ERROR;
- wep = wsp = 0;
+ wep = wsp = NULL;
do {
- while (Isspace(*wp))
+ while (iswspace(*wp))
wp++;
if (*wp == 0)
break;
wsp = wp;
- while (*wp && !Isspace(*wp))
+ while (*wp && !iswspace(*wp))
wp++;
wep = wp;
} while ((!el->el_state.doingarg || --el->el_state.argument > 0)
&& *wp != 0);
- if (wsp == 0 || (el->el_state.doingarg && el->el_state.argument != 0))
+ if (wsp == NULL || (el->el_state.doingarg && el->el_state.argument != 0))
return CC_ERROR;
cv_undo(el);
@@ -1131,9 +1130,9 @@
* Vi redo last non-motion command
* [.]
*/
-protected el_action_t
+libedit_private el_action_t
/*ARGSUSED*/
-vi_redo(EditLine *el, Int c __attribute__((__unused__)))
+vi_redo(EditLine *el, wint_t c __attribute__((__unused__)))
{
c_redo_t *r = &el->el_chared.c_redo;
@@ -1149,7 +1148,7 @@
/* sanity */
r->pos = r->lim - 1;
r->pos[0] = 0;
- FUN(el,push)(el, r->buf);
+ el_wpush(el, r->buf);
}
el->el_state.thiscmd = r->cmd;
diff --git a/src/vis.c b/src/vis.c
index 880eacb..ce66205 100644
--- a/src/vis.c
+++ b/src/vis.c
@@ -1,4 +1,4 @@
-/* $NetBSD: vis.c,v 1.60 2013/02/21 16:21:20 joerg Exp $ */
+/* $NetBSD: vis.c,v 1.74 2017/11/27 16:37:21 christos Exp $ */
/*-
* Copyright (c) 1989, 1993
@@ -58,7 +58,7 @@
#include "config.h"
#if defined(LIBC_SCCS) && !defined(lint)
-__RCSID("$NetBSD: vis.c,v 1.60 2013/02/21 16:21:20 joerg Exp $");
+__RCSID("$NetBSD: vis.c,v 1.74 2017/11/27 16:37:21 christos Exp $");
#endif /* LIBC_SCCS and not lint */
#ifdef __FBSDID
__FBSDID("$FreeBSD$");
@@ -97,6 +97,30 @@
#undef BELL
#define BELL L'\a'
+
+#if defined(LC_C_LOCALE)
+#define iscgraph(c) isgraph_l(c, LC_C_LOCALE)
+#else
+/* Keep it simple for now, no locale stuff */
+#define iscgraph(c) isgraph(c)
+#ifdef notyet
+#include <locale.h>
+static int
+iscgraph(int c) {
+ int rv;
+ char *ol;
+
+ ol = setlocale(LC_CTYPE, "C");
+ rv = isgraph(c);
+ if (ol)
+ setlocale(LC_CTYPE, ol);
+ return rv;
+}
+#endif
+#endif
+
+#define ISGRAPH(flags, c) \
+ (((flags) & VIS_NOLOCALE) ? iscgraph(c) : iswgraph(c))
#define iswoctal(c) (((u_char)(c)) >= L'0' && ((u_char)(c)) <= L'7')
#define iswwhite(c) (c == L' ' || c == L'\t' || c == L'\n')
@@ -104,7 +128,10 @@
#define xtoa(c) L"0123456789abcdef"[c]
#define XTOA(c) L"0123456789ABCDEF"[c]
-#define MAXEXTRAS 10
+#define MAXEXTRAS 30
+
+static const wchar_t char_shell[] = L"'`\";&<>()|{}]\\$!^~";
+static const wchar_t char_glob[] = L"*?[#";
#if !HAVE_NBTOOL_CONFIG_H
#ifndef __NetBSD__
@@ -215,8 +242,23 @@
*dst++ = L'0';
}
return dst;
+ /* We cannot encode these characters in VIS_CSTYLE
+ * because they special meaning */
+ case L'n':
+ case L'r':
+ case L'b':
+ case L'a':
+ case L'v':
+ case L't':
+ case L'f':
+ case L's':
+ case L'0':
+ case L'M':
+ case L'^':
+ case L'$': /* vis(1) -l */
+ break;
default:
- if (iswgraph(c)) {
+ if (ISGRAPH(flags, c) && !iswoctal(c)) {
*dst++ = L'\\';
*dst++ = c;
return dst;
@@ -268,7 +310,7 @@
uint64_t bmsk, wmsk;
iswextra = wcschr(extra, c) != NULL;
- if (!iswextra && (iswgraph(c) || iswwhite(c) ||
+ if (!iswextra && (ISGRAPH(flags, c) || iswwhite(c) ||
((flags & VIS_SAFE) && iswsafe(c)))) {
*dst++ = c;
return dst;
@@ -312,29 +354,32 @@
{
wchar_t *dst, *d;
size_t len;
+ const wchar_t *s;
len = strlen(src);
if ((dst = calloc(len + MAXEXTRAS, sizeof(*dst))) == NULL)
return NULL;
- if (mbstowcs(dst, src, len) == (size_t)-1) {
+ if ((flags & VIS_NOLOCALE) || mbstowcs(dst, src, len) == (size_t)-1) {
size_t i;
for (i = 0; i < len; i++)
- dst[i] = (wint_t)(u_char)src[i];
+ dst[i] = (wchar_t)(u_char)src[i];
d = dst + len;
} else
d = dst + wcslen(dst);
- if (flags & VIS_GLOB) {
- *d++ = L'*';
- *d++ = L'?';
- *d++ = L'[';
- *d++ = L'#';
- }
+ if (flags & VIS_GLOB)
+ for (s = char_glob; *s; *d++ = *s++)
+ continue;
+
+ if (flags & VIS_SHELL)
+ for (s = char_shell; *s; *d++ = *s++)
+ continue;
if (flags & VIS_SP) *d++ = L' ';
if (flags & VIS_TAB) *d++ = L'\t';
if (flags & VIS_NL) *d++ = L'\n';
+ if (flags & VIS_DQ) *d++ = L'"';
if ((flags & VIS_NOSLASH) == 0) *d++ = L'\\';
*d = L'\0';
@@ -347,7 +392,7 @@
* All user-visible functions call this one.
*/
static int
-istrsenvisx(char *mbdst, size_t *dlen, const char *mbsrc, size_t mblength,
+istrsenvisx(char **mbdstp, size_t *dlen, const char *mbsrc, size_t mblength,
int flags, const char *mbextra, int *cerr_ptr)
{
wchar_t *dst, *src, *pdst, *psrc, *start, *extra;
@@ -355,13 +400,22 @@
uint64_t bmsk, wmsk;
wint_t c;
visfun_t f;
- int clen = 0, cerr = 0, error = -1, i, shft;
+ int clen = 0, cerr, error = -1, i, shft;
+ char *mbdst, *mdst;
ssize_t mbslength, maxolen;
- _DIAGASSERT(mbdst != NULL);
- _DIAGASSERT(mbsrc != NULL);
+ _DIAGASSERT(mbdstp != NULL);
+ _DIAGASSERT(mbsrc != NULL || mblength == 0);
_DIAGASSERT(mbextra != NULL);
+ mbslength = (ssize_t)mblength;
+ /*
+ * When inputing a single character, must also read in the
+ * next character for nextc, the look-ahead character.
+ */
+ if (mbslength == 1)
+ mbslength++;
+
/*
* Input (mbsrc) is a char string considered to be multibyte
* characters. The input loop will read this string pulling
@@ -377,18 +431,28 @@
/* Allocate space for the wide char strings */
psrc = pdst = extra = NULL;
- if (!mblength)
- mblength = strlen(mbsrc);
- if ((psrc = calloc(mblength + 1, sizeof(*psrc))) == NULL)
+ mdst = NULL;
+ if ((psrc = calloc(mbslength + 1, sizeof(*psrc))) == NULL)
return -1;
- if ((pdst = calloc((4 * mblength) + 1, sizeof(*pdst))) == NULL)
+ if ((pdst = calloc((16 * mbslength) + 1, sizeof(*pdst))) == NULL)
goto out;
+ if (*mbdstp == NULL) {
+ if ((mdst = calloc((16 * mbslength) + 1, sizeof(*mdst))) == NULL)
+ goto out;
+ *mbdstp = mdst;
+ }
+
+ mbdst = *mbdstp;
dst = pdst;
src = psrc;
- /* Use caller's multibyte conversion error flag. */
- if (cerr_ptr)
- cerr = *cerr_ptr;
+ if (flags & VIS_NOLOCALE) {
+ /* Do one byte at a time conversion */
+ cerr = 1;
+ } else {
+ /* Use caller's multibyte conversion error flag. */
+ cerr = cerr_ptr ? *cerr_ptr : 0;
+ }
/*
* Input loop.
@@ -396,13 +460,6 @@
* stop at NULs because we may be processing a block of data
* that includes NULs.
*/
- mbslength = (ssize_t)mblength;
- /*
- * When inputing a single character, must also read in the
- * next character for nextc, the look-ahead character.
- */
- if (mbslength == 1)
- mbslength++;
while (mbslength > 0) {
/* Convert one multibyte character to wchar_t. */
if (!cerr)
@@ -413,12 +470,13 @@
clen = 1;
cerr = 1;
}
- if (clen == 0)
+ if (clen == 0) {
/*
* NUL in input gives 0 return value. process
* as single NUL byte and keep going.
*/
clen = 1;
+ }
/* Advance buffer character pointer. */
src++;
/* Advance input pointer by number of bytes read. */
@@ -428,6 +486,7 @@
}
len = src - psrc;
src = psrc;
+
/*
* In the single character input case, we will have actually
* processed two characters, c and nextc. Reset len back to
@@ -443,7 +502,7 @@
errno = ENOSPC;
goto out;
}
- *mbdst = '\0'; /* can't create extra, return "" */
+ *mbdst = '\0'; /* can't create extra, return "" */
error = 0;
goto out;
}
@@ -515,9 +574,11 @@
/* Terminate the output string. */
*mbdst = '\0';
- /* Pass conversion error flag out. */
- if (cerr_ptr)
- *cerr_ptr = cerr;
+ if (flags & VIS_NOLOCALE) {
+ /* Pass conversion error flag out. */
+ if (cerr_ptr)
+ *cerr_ptr = cerr;
+ }
free(extra);
free(pdst);
@@ -528,8 +589,18 @@
free(extra);
free(pdst);
free(psrc);
+ free(mdst);
return error;
}
+
+static int
+istrsenvisxl(char **mbdstp, size_t *dlen, const char *mbsrc,
+ int flags, const char *mbextra, int *cerr_ptr)
+{
+ return istrsenvisx(mbdstp, dlen, mbsrc,
+ mbsrc != NULL ? strlen(mbsrc) : 0, flags, mbextra, cerr_ptr);
+}
+
#endif
#if !HAVE_SVIS
@@ -549,7 +620,7 @@
cc[0] = c;
cc[1] = nextc;
- ret = istrsenvisx(mbdst, NULL, cc, 1, flags, mbextra, NULL);
+ ret = istrsenvisx(&mbdst, NULL, cc, 1, flags, mbextra, NULL);
if (ret < 0)
return NULL;
return mbdst + ret;
@@ -564,7 +635,7 @@
cc[0] = c;
cc[1] = nextc;
- ret = istrsenvisx(mbdst, &dlen, cc, 1, flags, mbextra, NULL);
+ ret = istrsenvisx(&mbdst, &dlen, cc, 1, flags, mbextra, NULL);
if (ret < 0)
return NULL;
return mbdst + ret;
@@ -573,33 +644,33 @@
int
strsvis(char *mbdst, const char *mbsrc, int flags, const char *mbextra)
{
- return istrsenvisx(mbdst, NULL, mbsrc, 0, flags, mbextra, NULL);
+ return istrsenvisxl(&mbdst, NULL, mbsrc, flags, mbextra, NULL);
}
int
strsnvis(char *mbdst, size_t dlen, const char *mbsrc, int flags, const char *mbextra)
{
- return istrsenvisx(mbdst, &dlen, mbsrc, 0, flags, mbextra, NULL);
+ return istrsenvisxl(&mbdst, &dlen, mbsrc, flags, mbextra, NULL);
}
int
strsvisx(char *mbdst, const char *mbsrc, size_t len, int flags, const char *mbextra)
{
- return istrsenvisx(mbdst, NULL, mbsrc, len, flags, mbextra, NULL);
+ return istrsenvisx(&mbdst, NULL, mbsrc, len, flags, mbextra, NULL);
}
int
strsnvisx(char *mbdst, size_t dlen, const char *mbsrc, size_t len, int flags,
const char *mbextra)
{
- return istrsenvisx(mbdst, &dlen, mbsrc, len, flags, mbextra, NULL);
+ return istrsenvisx(&mbdst, &dlen, mbsrc, len, flags, mbextra, NULL);
}
int
strsenvisx(char *mbdst, size_t dlen, const char *mbsrc, size_t len, int flags,
const char *mbextra, int *cerr_ptr)
{
- return istrsenvisx(mbdst, &dlen, mbsrc, len, flags, mbextra, cerr_ptr);
+ return istrsenvisx(&mbdst, &dlen, mbsrc, len, flags, mbextra, cerr_ptr);
}
#endif
@@ -616,7 +687,7 @@
cc[0] = c;
cc[1] = nextc;
- ret = istrsenvisx(mbdst, NULL, cc, 1, flags, "", NULL);
+ ret = istrsenvisx(&mbdst, NULL, cc, 1, flags, "", NULL);
if (ret < 0)
return NULL;
return mbdst + ret;
@@ -631,7 +702,7 @@
cc[0] = c;
cc[1] = nextc;
- ret = istrsenvisx(mbdst, &dlen, cc, 1, flags, "", NULL);
+ ret = istrsenvisx(&mbdst, &dlen, cc, 1, flags, "", NULL);
if (ret < 0)
return NULL;
return mbdst + ret;
@@ -648,13 +719,20 @@
int
strvis(char *mbdst, const char *mbsrc, int flags)
{
- return istrsenvisx(mbdst, NULL, mbsrc, 0, flags, "", NULL);
+ return istrsenvisxl(&mbdst, NULL, mbsrc, flags, "", NULL);
}
int
strnvis(char *mbdst, size_t dlen, const char *mbsrc, int flags)
{
- return istrsenvisx(mbdst, &dlen, mbsrc, 0, flags, "", NULL);
+ return istrsenvisxl(&mbdst, &dlen, mbsrc, flags, "", NULL);
+}
+
+int
+stravis(char **mbdstp, const char *mbsrc, int flags)
+{
+ *mbdstp = NULL;
+ return istrsenvisxl(mbdstp, NULL, mbsrc, flags, "", NULL);
}
/*
@@ -671,19 +749,19 @@
int
strvisx(char *mbdst, const char *mbsrc, size_t len, int flags)
{
- return istrsenvisx(mbdst, NULL, mbsrc, len, flags, "", NULL);
+ return istrsenvisx(&mbdst, NULL, mbsrc, len, flags, "", NULL);
}
int
strnvisx(char *mbdst, size_t dlen, const char *mbsrc, size_t len, int flags)
{
- return istrsenvisx(mbdst, &dlen, mbsrc, len, flags, "", NULL);
+ return istrsenvisx(&mbdst, &dlen, mbsrc, len, flags, "", NULL);
}
int
strenvisx(char *mbdst, size_t dlen, const char *mbsrc, size_t len, int flags,
int *cerr_ptr)
{
- return istrsenvisx(mbdst, &dlen, mbsrc, len, flags, "", cerr_ptr);
+ return istrsenvisx(&mbdst, &dlen, mbsrc, len, flags, "", cerr_ptr);
}
#endif
diff --git a/src/vis.h b/src/vis.h
index 93e758e..2306978 100644
--- a/src/vis.h
+++ b/src/vis.h
@@ -1,4 +1,4 @@
-/* $NetBSD: vis.h,v 1.21 2013/02/20 17:01:15 christos Exp $ */
+/* $NetBSD: vis.h,v 1.25 2017/04/23 01:57:36 christos Exp $ */
/*-
* Copyright (c) 1990, 1993
@@ -49,6 +49,7 @@
#define VIS_NL 0x0010 /* also encode newline */
#define VIS_WHITE (VIS_SP | VIS_TAB | VIS_NL)
#define VIS_SAFE 0x0020 /* only encode "unsafe" characters */
+#define VIS_DQ 0x8000 /* also encode double quotes */
/*
* other
@@ -61,6 +62,9 @@
#define VIS_NOESCAPE 0x0400 /* don't decode `\' */
#define _VIS_END 0x0800 /* for unvis */
#define VIS_GLOB 0x1000 /* encode glob(3) magic characters */
+#define VIS_SHELL 0x2000 /* encode shell special characters [not glob] */
+#define VIS_META (VIS_WHITE | VIS_GLOB | VIS_SHELL)
+#define VIS_NOLOCALE 0x4000 /* encode using the C locale */
/*
* unvis return codes
@@ -84,6 +88,7 @@
char *snvis(char *, size_t, int, int, int, const char *);
int strvis(char *, const char *, int);
+int stravis(char **, const char *, int);
int strnvis(char *, size_t, const char *, int);
int strsvis(char *, const char *, int, const char *);