device-lynx.mk - device/google/lynx - Git at Google

 #
 # Copyright (C) 2021 The Android Open-Source Project
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
 # You may obtain a copy of the License at
 #
 #      http://www.apache.org/licenses/LICENSE-2.0
 #
 # Unless required by applicable law or agreed to in writing, software
 # distributed under the License is distributed on an "AS IS" BASIS,
 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 # See the License for the specific language governing permissions and
 # limitations under the License.
 #

 TARGET_KERNEL_DIR ?= device/google/lynx-kernel
 TARGET_BOARD_KERNEL_HEADERS := device/google/lynx-kernel/kernel-headers

 $(call inherit-product-if-exists, vendor/google_devices/lynx/prebuilts/device-vendor-lynx.mk)
 $(call inherit-product-if-exists, vendor/google_devices/gs201/prebuilts/device-vendor.mk)
 $(call inherit-product-if-exists, vendor/google_devices/gs201/proprietary/device-vendor.mk)
 $(call inherit-product-if-exists, vendor/google_devices/lynx/proprietary/lynx/device-vendor-lynx.mk)
 $(call inherit-product-if-exists, vendor/google_devices/lynx/proprietary/device-vendor.mk)
 $(call inherit-product-if-exists, vendor/google_devices/lynx/proprietary/WallpapersLynx.mk)

 DEVICE_PACKAGE_OVERLAYS += device/google/lynx/lynx/overlay

 include device/google/lynx/audio/lynx/audio-tables.mk
 include device/google/gs201/device-shipping-common.mk
 include hardware/google/pixel/vibrator/cs40l26/device.mk
 include device/google/gs-common/touch/gti/gti.mk
 include device/google/gs-common/wlan/dump.mk

 # go/lyric-soong-variables
 $(call soong_config_set,lyric,camera_hardware,lynx)
 $(call soong_config_set,lyric,tuning_product,lynx)
 $(call soong_config_set,google3a_config,target_device,lynx)

 # Init files
 PRODUCT_COPY_FILES += \
 	device/google/lynx/conf/init.lynx.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.lynx.rc

 # Recovery files
 PRODUCT_COPY_FILES += \
         device/google/lynx/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.lynx.rc

 # insmod files
 PRODUCT_COPY_FILES += \
 	device/google/lynx/init.insmod.lynx.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/init.insmod.lynx.cfg

 # Camera
 PRODUCT_COPY_FILES += \
 	device/google/lynx/media_profiles_lynx.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml

 # Media Performance Class 13
 PRODUCT_PROPERTY_OVERRIDES += ro.odm.build.media_performance_class=33

 # Display Config
 PRODUCT_COPY_FILES += \
         device/google/lynx/lynx/display_colordata_dev_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_colordata_dev_cal0.pb
 # Display
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.lbe.supported=1
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.set_idle_timer_ms=1500
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.ignore_hdr_camera_layers=true

 #config of primary display frames to reach LHBM peak brightness
 PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.primarydisplay.lhbm.frames_to_reach_peak_brightness=2

 # NFC
 PRODUCT_COPY_FILES += \
 	frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \
 	frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \
 	frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \
 	frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \
 	frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \
 	device/google/lynx/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \
     device/google/lynx/nfc/libnfc-nci-lynx.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf

 PRODUCT_PACKAGES += \
 	NfcNci \
 	Tag \
 	android.hardware.nfc-service.st

 # SecureElement
 PRODUCT_PACKAGES += \
 	android.hardware.secure_element@1.2-service-gto \
 	android.hardware.secure_element@1.2-service-gto-ese2

 PRODUCT_COPY_FILES += \
 	frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \
 	frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml \
 	device/google/lynx/nfc/libse-gto-hal.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal.conf \
 	device/google/lynx/nfc/libse-gto-hal2.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal2.conf

 DEVICE_MANIFEST_FILE += \
 	device/google/lynx/nfc/manifest_se.xml

 # Thermal Config
 PRODUCT_COPY_FILES += \
 	device/google/lynx/thermal_info_config_lynx.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config.json \
 	device/google/lynx/thermal_info_config_charge_lynx.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config_charge.json

 # Power HAL config
 PRODUCT_COPY_FILES += \
 	device/google/lynx/powerhint.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint.json

 # PowerStats HAL
 PRODUCT_SOONG_NAMESPACES += \
     device/google/lynx/powerstats \
     device/google/lynx

 # Bluetooth HAL and Pixel extension
 include device/google/lynx/bluetooth/qti_default.mk

 # Keymaster HAL
 #LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service

 # Gatekeeper HAL
 #LOCAL_GATEKEEPER_PRODUCT_PACKAGE ?= android.hardware.gatekeeper@1.0-service.software


 # Gatekeeper
 # PRODUCT_PACKAGES += \
 # 	android.hardware.gatekeeper@1.0-service.software

 # Keymint replaces Keymaster
 # PRODUCT_PACKAGES += \
 # 	android.hardware.security.keymint-service

 # Keymaster
 #PRODUCT_PACKAGES += \
 #	android.hardware.keymaster@4.0-impl \
 #	android.hardware.keymaster@4.0-service

 #PRODUCT_PACKAGES += android.hardware.keymaster@4.0-service.remote
 #PRODUCT_PACKAGES += android.hardware.keymaster@4.1-service.remote
 #LOCAL_KEYMASTER_PRODUCT_PACKAGE := android.hardware.keymaster@4.1-service
 #LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service

 # PRODUCT_PROPERTY_OVERRIDES += \
 # 	ro.hardware.keystore_desede=true \
 # 	ro.hardware.keystore=software \
 # 	ro.hardware.gatekeeper=software

 # Fingerprint HAL
 GOODIX_CONFIG_BUILD_VERSION := g7_trusty
 include device/google/gs101/fingerprint/udfps_common.mk
 ifeq ($(filter factory%, $(TARGET_PRODUCT)),)
 include device/google/gs101/fingerprint/udfps_shipping.mk
 else
 include device/google/gs101/fingerprint/udfps_factory.mk
 endif

 # Vibrator HAL
 ADAPTIVE_HAPTICS_FEATURE := adaptive_haptics_v1
 PRODUCT_VENDOR_PROPERTIES += \
 	ro.vendor.vibrator.hal.supported_primitives=243 \
 	ro.vendor.vibrator.hal.f0.comp.enabled=1 \
 	ro.vendor.vibrator.hal.redc.comp.enabled=0 \
 	persist.vendor.vibrator.hal.context.enable=false \
 	persist.vendor.vibrator.hal.context.scale=40 \
 	persist.vendor.vibrator.hal.context.fade=true \
 	persist.vendor.vibrator.hal.context.cooldowntime=1600 \
 	persist.vendor.vibrator.hal.context.settlingtime=5000

 # Trusty liboemcrypto.so
 PRODUCT_SOONG_NAMESPACES += vendor/google_devices/lynx/prebuilts

 # GPS xml
 ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
         PRODUCT_COPY_FILES += \
                 device/google/lynx/location/gps.xml.l10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml \
                 device/google/lynx/location/lhd.conf.l10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
                 device/google/lynx/location/scd.conf.l10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf
 else
         PRODUCT_COPY_FILES += \
                 device/google/lynx/location/gps_user.xml.l10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml \
                 device/google/lynx/location/lhd_user.conf.l10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
                 device/google/lynx/location/scd_user.conf.l10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf
 endif

 # DCK properties based on target
 PRODUCT_PROPERTY_OVERRIDES += \
     ro.gms.dck.eligible_wcc=2 \
     ro.gms.dck.se_capability=1

 # WIFI COEX
 PRODUCT_COPY_FILES += \
 	device/google/lynx/wifi/coex_table.xml:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/coex_table.xml

 # WiFi Overlay
 PRODUCT_PACKAGES += \
 	WifiOverlay2023Mid

 # Wifi Aware Interface
 PRODUCT_PROPERTY_OVERRIDES += \
 	wifi.aware.interface=wifi-aware0

 # Set zram size
 PRODUCT_VENDOR_PROPERTIES += \
 	vendor.zram.size=3g

 # Increment the SVN for any official public releases
 PRODUCT_VENDOR_PROPERTIES += \
     ro.vendor.build.svn=21

 # Set support hide display cutout feature
 PRODUCT_PRODUCT_PROPERTIES += \
     ro.support_hide_display_cutout=true

 # Set support One-handed mode
 PRODUCT_PRODUCT_PROPERTIES += \
     ro.support_one_handed_mode=true

 # Fingerprint als feed forward
 PRODUCT_VENDOR_PROPERTIES += \
     persist.vendor.udfps.als_feed_forward_supported=true \
     persist.vendor.udfps.lhbm_controlled_in_hal_supported=true

 # Hide cutout overlays
 PRODUCT_PACKAGES += \
     NoCutoutOverlay \
     AvoidAppsInCutoutOverlay

 # MIPI Coex Configs
 PRODUCT_COPY_FILES += \
     device/google/lynx/lynx/radio/lynx_display_primary_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/display_primary_mipi_coex_table.csv

 # Camera
 PRODUCT_PROPERTY_OVERRIDES += \
 	persist.vendor.camera.extended_launch_boost=1 \
 	persist.vendor.camera.optimized_tnr_freq=1 \
 	persist.vendor.camera.raise_buf_allocation_priority=1 \
 	persist.vendor.camera.start_cpu_throttling_at_moderate_thermal=1

 # Enable camera 1080P 60FPS binning mode
 PRODUCT_VENDOR_PROPERTIES += \
     persist.vendor.camera.1080P_60fps_binning=true

 # Increase thread priority for nodes stop
 PRODUCT_VENDOR_PROPERTIES += \
     persist.vendor.camera.increase_thread_priority_nodes_stop=true

 # OIS with system imu
 PRODUCT_VENDOR_PROPERTIES += \
     persist.vendor.camera.ois_with_system_imu=true

 # Enable camera exif model/make reporting
 PRODUCT_VENDOR_PROPERTIES += \
     persist.vendor.camera.exif_reveal_make_model=true

 # Enable front camera always binning for 720P or smaller resolution
 PRODUCT_VENDOR_PROPERTIES += \
     persist.vendor.camera.front_720P_always_binning=true

 # Device features
 PRODUCT_COPY_FILES += \
     frameworks/native/data/etc/handheld_core_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/handheld_core_hardware.xml

 # The default value of this variable is false and should only be set to true when
 # the device allows users to enable the seamless transfer feature.
 PRODUCT_PRODUCT_PROPERTIES += \
    euicc.seamless_transfer_enabled_in_non_qs=true

 ##Audio Vendor property
 PRODUCT_PROPERTY_OVERRIDES += \
 	persist.vendor.audio.cca.enabled=true

 # userdebug specific
 ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
     PRODUCT_COPY_FILES += \
         device/google/gs201/init.hardware.wlc.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.wlc.rc
 endif

 # SKU specific RROs
 PRODUCT_PACKAGES += \
     SettingsOverlayG82U8 \
     SettingsOverlayG0DZQ \
     SettingsOverlayGHL1X \
     SettingsOverlayGWKK3
	#
	# Copyright (C) 2021 The Android Open-Source Project
	#
	# Licensed under the Apache License, Version 2.0 (the "License");
	# you may not use this file except in compliance with the License.
	# You may obtain a copy of the License at
	#
	# http://www.apache.org/licenses/LICENSE-2.0
	#
	# Unless required by applicable law or agreed to in writing, software
	# distributed under the License is distributed on an "AS IS" BASIS,
	# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	# See the License for the specific language governing permissions and
	# limitations under the License.
	#

	TARGET_KERNEL_DIR ?= device/google/lynx-kernel
	TARGET_BOARD_KERNEL_HEADERS := device/google/lynx-kernel/kernel-headers

	$(call inherit-product-if-exists, vendor/google_devices/lynx/prebuilts/device-vendor-lynx.mk)
	$(call inherit-product-if-exists, vendor/google_devices/gs201/prebuilts/device-vendor.mk)
	$(call inherit-product-if-exists, vendor/google_devices/gs201/proprietary/device-vendor.mk)
	$(call inherit-product-if-exists, vendor/google_devices/lynx/proprietary/lynx/device-vendor-lynx.mk)
	$(call inherit-product-if-exists, vendor/google_devices/lynx/proprietary/device-vendor.mk)
	$(call inherit-product-if-exists, vendor/google_devices/lynx/proprietary/WallpapersLynx.mk)

	DEVICE_PACKAGE_OVERLAYS += device/google/lynx/lynx/overlay

	include device/google/lynx/audio/lynx/audio-tables.mk
	include device/google/gs201/device-shipping-common.mk
	include hardware/google/pixel/vibrator/cs40l26/device.mk
	include device/google/gs-common/touch/gti/gti.mk
	include device/google/gs-common/wlan/dump.mk

	# go/lyric-soong-variables
	$(call soong_config_set,lyric,camera_hardware,lynx)
	$(call soong_config_set,lyric,tuning_product,lynx)
	$(call soong_config_set,google3a_config,target_device,lynx)

	# Init files
	PRODUCT_COPY_FILES += \
	device/google/lynx/conf/init.lynx.rc:$(TARGET_COPY_OUT_VENDOR)/etc/init/hw/init.lynx.rc

	# Recovery files
	PRODUCT_COPY_FILES += \
	device/google/lynx/conf/init.recovery.device.rc:$(TARGET_COPY_OUT_RECOVERY)/root/init.recovery.lynx.rc

	# insmod files
	PRODUCT_COPY_FILES += \
	device/google/lynx/init.insmod.lynx.cfg:$(TARGET_COPY_OUT_VENDOR)/etc/init.insmod.lynx.cfg

	# Camera
	PRODUCT_COPY_FILES += \
	device/google/lynx/media_profiles_lynx.xml:$(TARGET_COPY_OUT_VENDOR)/etc/media_profiles_V1_0.xml

	# Media Performance Class 13
	PRODUCT_PROPERTY_OVERRIDES += ro.odm.build.media_performance_class=33

	# Display Config
	PRODUCT_COPY_FILES += \
	device/google/lynx/lynx/display_colordata_dev_cal0.pb:$(TARGET_COPY_OUT_VENDOR)/etc/display_colordata_dev_cal0.pb
	# Display
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.display.lbe.supported=1
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.set_idle_timer_ms=1500
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += ro.surface_flinger.ignore_hdr_camera_layers=true

	#config of primary display frames to reach LHBM peak brightness
	PRODUCT_DEFAULT_PROPERTY_OVERRIDES += vendor.primarydisplay.lhbm.frames_to_reach_peak_brightness=2

	# NFC
	PRODUCT_COPY_FILES += \
	frameworks/native/data/etc/android.hardware.nfc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.xml \
	frameworks/native/data/etc/android.hardware.nfc.hce.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hce.xml \
	frameworks/native/data/etc/android.hardware.nfc.hcef.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.hcef.xml \
	frameworks/native/data/etc/com.nxp.mifare.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/com.nxp.mifare.xml \
	frameworks/native/data/etc/android.hardware.nfc.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.nfc.ese.xml \
	device/google/lynx/nfc/libnfc-hal-st.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libnfc-hal-st.conf \
	device/google/lynx/nfc/libnfc-nci-lynx.conf:$(TARGET_COPY_OUT_PRODUCT)/etc/libnfc-nci.conf

	PRODUCT_PACKAGES += \
	NfcNci \
	Tag \
	android.hardware.nfc-service.st

	# SecureElement
	PRODUCT_PACKAGES += \
	android.hardware.secure_element@1.2-service-gto \
	android.hardware.secure_element@1.2-service-gto-ese2

	PRODUCT_COPY_FILES += \
	frameworks/native/data/etc/android.hardware.se.omapi.ese.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.ese.xml \
	frameworks/native/data/etc/android.hardware.se.omapi.uicc.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/android.hardware.se.omapi.uicc.xml \
	device/google/lynx/nfc/libse-gto-hal.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal.conf \
	device/google/lynx/nfc/libse-gto-hal2.conf:$(TARGET_COPY_OUT_VENDOR)/etc/libse-gto-hal2.conf

	DEVICE_MANIFEST_FILE += \
	device/google/lynx/nfc/manifest_se.xml

	# Thermal Config
	PRODUCT_COPY_FILES += \
	device/google/lynx/thermal_info_config_lynx.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config.json \
	device/google/lynx/thermal_info_config_charge_lynx.json:$(TARGET_COPY_OUT_VENDOR)/etc/thermal_info_config_charge.json

	# Power HAL config
	PRODUCT_COPY_FILES += \
	device/google/lynx/powerhint.json:$(TARGET_COPY_OUT_VENDOR)/etc/powerhint.json

	# PowerStats HAL
	PRODUCT_SOONG_NAMESPACES += \
	device/google/lynx/powerstats \
	device/google/lynx

	# Bluetooth HAL and Pixel extension
	include device/google/lynx/bluetooth/qti_default.mk

	# Keymaster HAL
	#LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service

	# Gatekeeper HAL
	#LOCAL_GATEKEEPER_PRODUCT_PACKAGE ?= android.hardware.gatekeeper@1.0-service.software


	# Gatekeeper
	# PRODUCT_PACKAGES += \
	# android.hardware.gatekeeper@1.0-service.software

	# Keymint replaces Keymaster
	# PRODUCT_PACKAGES += \
	# android.hardware.security.keymint-service

	# Keymaster
	#PRODUCT_PACKAGES += \
	# android.hardware.keymaster@4.0-impl \
	# android.hardware.keymaster@4.0-service

	#PRODUCT_PACKAGES += android.hardware.keymaster@4.0-service.remote
	#PRODUCT_PACKAGES += android.hardware.keymaster@4.1-service.remote
	#LOCAL_KEYMASTER_PRODUCT_PACKAGE := android.hardware.keymaster@4.1-service
	#LOCAL_KEYMASTER_PRODUCT_PACKAGE ?= android.hardware.keymaster@4.1-service

	# PRODUCT_PROPERTY_OVERRIDES += \
	# ro.hardware.keystore_desede=true \
	# ro.hardware.keystore=software \
	# ro.hardware.gatekeeper=software

	# Fingerprint HAL
	GOODIX_CONFIG_BUILD_VERSION := g7_trusty
	include device/google/gs101/fingerprint/udfps_common.mk
	ifeq ($(filter factory%, $(TARGET_PRODUCT)),)
	include device/google/gs101/fingerprint/udfps_shipping.mk
	else
	include device/google/gs101/fingerprint/udfps_factory.mk
	endif

	# Vibrator HAL
	ADAPTIVE_HAPTICS_FEATURE := adaptive_haptics_v1
	PRODUCT_VENDOR_PROPERTIES += \
	ro.vendor.vibrator.hal.supported_primitives=243 \
	ro.vendor.vibrator.hal.f0.comp.enabled=1 \
	ro.vendor.vibrator.hal.redc.comp.enabled=0 \
	persist.vendor.vibrator.hal.context.enable=false \
	persist.vendor.vibrator.hal.context.scale=40 \
	persist.vendor.vibrator.hal.context.fade=true \
	persist.vendor.vibrator.hal.context.cooldowntime=1600 \
	persist.vendor.vibrator.hal.context.settlingtime=5000

	# Trusty liboemcrypto.so
	PRODUCT_SOONG_NAMESPACES += vendor/google_devices/lynx/prebuilts

	# GPS xml
	ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
	PRODUCT_COPY_FILES += \
	device/google/lynx/location/gps.xml.l10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml \
	device/google/lynx/location/lhd.conf.l10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
	device/google/lynx/location/scd.conf.l10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf
	else
	PRODUCT_COPY_FILES += \
	device/google/lynx/location/gps_user.xml.l10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/gps.xml \
	device/google/lynx/location/lhd_user.conf.l10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/lhd.conf \
	device/google/lynx/location/scd_user.conf.l10:$(TARGET_COPY_OUT_VENDOR)/etc/gnss/scd.conf
	endif

	# DCK properties based on target
	PRODUCT_PROPERTY_OVERRIDES += \
	ro.gms.dck.eligible_wcc=2 \
	ro.gms.dck.se_capability=1

	# WIFI COEX
	PRODUCT_COPY_FILES += \
	device/google/lynx/wifi/coex_table.xml:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/coex_table.xml

	# WiFi Overlay
	PRODUCT_PACKAGES += \
	WifiOverlay2023Mid

	# Wifi Aware Interface
	PRODUCT_PROPERTY_OVERRIDES += \
	wifi.aware.interface=wifi-aware0

	# Set zram size
	PRODUCT_VENDOR_PROPERTIES += \
	vendor.zram.size=3g

	# Increment the SVN for any official public releases
	PRODUCT_VENDOR_PROPERTIES += \
	ro.vendor.build.svn=21

	# Set support hide display cutout feature
	PRODUCT_PRODUCT_PROPERTIES += \
	ro.support_hide_display_cutout=true

	# Set support One-handed mode
	PRODUCT_PRODUCT_PROPERTIES += \
	ro.support_one_handed_mode=true

	# Fingerprint als feed forward
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.udfps.als_feed_forward_supported=true \
	persist.vendor.udfps.lhbm_controlled_in_hal_supported=true

	# Hide cutout overlays
	PRODUCT_PACKAGES += \
	NoCutoutOverlay \
	AvoidAppsInCutoutOverlay

	# MIPI Coex Configs
	PRODUCT_COPY_FILES += \
	device/google/lynx/lynx/radio/lynx_display_primary_mipi_coex_table.csv:$(TARGET_COPY_OUT_VENDOR)/etc/modem/display_primary_mipi_coex_table.csv

	# Camera
	PRODUCT_PROPERTY_OVERRIDES += \
	persist.vendor.camera.extended_launch_boost=1 \
	persist.vendor.camera.optimized_tnr_freq=1 \
	persist.vendor.camera.raise_buf_allocation_priority=1 \
	persist.vendor.camera.start_cpu_throttling_at_moderate_thermal=1

	# Enable camera 1080P 60FPS binning mode
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.camera.1080P_60fps_binning=true

	# Increase thread priority for nodes stop
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.camera.increase_thread_priority_nodes_stop=true

	# OIS with system imu
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.camera.ois_with_system_imu=true

	# Enable camera exif model/make reporting
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.camera.exif_reveal_make_model=true

	# Enable front camera always binning for 720P or smaller resolution
	PRODUCT_VENDOR_PROPERTIES += \
	persist.vendor.camera.front_720P_always_binning=true

	# Device features
	PRODUCT_COPY_FILES += \
	frameworks/native/data/etc/handheld_core_hardware.xml:$(TARGET_COPY_OUT_VENDOR)/etc/permissions/handheld_core_hardware.xml

	# The default value of this variable is false and should only be set to true when
	# the device allows users to enable the seamless transfer feature.
	PRODUCT_PRODUCT_PROPERTIES += \
	euicc.seamless_transfer_enabled_in_non_qs=true

	##Audio Vendor property
	PRODUCT_PROPERTY_OVERRIDES += \
	persist.vendor.audio.cca.enabled=true

	# userdebug specific
	ifneq (,$(filter userdebug eng, $(TARGET_BUILD_VARIANT)))
	PRODUCT_COPY_FILES += \
	device/google/gs201/init.hardware.wlc.rc.userdebug:$(TARGET_COPY_OUT_VENDOR)/etc/init/init.wlc.rc
	endif

	# SKU specific RROs
	PRODUCT_PACKAGES += \
	SettingsOverlayG82U8 \
	SettingsOverlayG0DZQ \
	SettingsOverlayGHL1X \
	SettingsOverlayGWKK3