| ############################################################ |
| # Default Networking Configuration File |
| # |
| # This file may contain default values for the networking system properties. |
| # These values are only used when the system properties are not specified |
| # on the command line or set programmatically. |
| # For now, only the various proxy settings can be configured here. |
| ############################################################ |
| |
| # Whether or not the DefaultProxySelector will default to System Proxy |
| # settings when they do exist. |
| # Set it to 'true' to enable this feature and check for platform |
| # specific proxy settings |
| # Note that the system properties that do explicitly set proxies |
| # (like http.proxyHost) do take precedence over the system settings |
| # even if java.net.useSystemProxies is set to true. |
| |
| java.net.useSystemProxies=false |
| |
| #------------------------------------------------------------------------ |
| # Proxy configuration for the various protocol handlers. |
| # DO NOT uncomment these lines if you have set java.net.useSystemProxies |
| # to true as the protocol specific properties will take precedence over |
| # system settings. |
| #------------------------------------------------------------------------ |
| |
| # HTTP Proxy settings. proxyHost is the name of the proxy server |
| # (e.g. proxy.mydomain.com), proxyPort is the port number to use (default |
| # value is 80) and nonProxyHosts is a '|' separated list of hostnames which |
| # should be accessed directly, ignoring the proxy server (default value is |
| # localhost & 127.0.0.1). |
| # |
| # http.proxyHost= |
| # http.proxyPort=80 |
| http.nonProxyHosts=localhost|127.*|[::1] |
| # |
| # HTTPS Proxy Settings. proxyHost is the name of the proxy server |
| # (e.g. proxy.mydomain.com), proxyPort is the port number to use (default |
| # value is 443). The HTTPS protocol handlers uses the http nonProxyHosts list. |
| # |
| # https.proxyHost= |
| # https.proxyPort=443 |
| # |
| # FTP Proxy settings. proxyHost is the name of the proxy server |
| # (e.g. proxy.mydomain.com), proxyPort is the port number to use (default |
| # value is 80) and nonProxyHosts is a '|' separated list of hostnames which |
| # should be accessed directly, ignoring the proxy server (default value is |
| # localhost & 127.0.0.1). |
| # |
| # ftp.proxyHost= |
| # ftp.proxyPort=80 |
| ftp.nonProxyHosts=localhost|127.*|[::1] |
| # |
| # Socks proxy settings. socksProxyHost is the name of the proxy server |
| # (e.g. socks.domain.com), socksProxyPort is the port number to use |
| # (default value is 1080) |
| # |
| # socksProxyHost= |
| # socksProxyPort=1080 |
| # |
| # HTTP Keep Alive settings. remainingData is the maximum amount of data |
| # in kilobytes that will be cleaned off the underlying socket so that it |
| # can be reused (default value is 512K), queuedConnections is the maximum |
| # number of Keep Alive connections to be on the queue for clean up (default |
| # value is 10). |
| # http.KeepAlive.remainingData=512 |
| # http.KeepAlive.queuedConnections=10 |
| |
| # Authentication Scheme restrictions for HTTP and HTTPS. |
| # |
| # In some environments certain authentication schemes may be undesirable |
| # when proxying HTTP or HTTPS. For example, "Basic" results in effectively the |
| # cleartext transmission of the user's password over the physical network. |
| # This section describes the mechanism for disabling authentication schemes |
| # based on the scheme name. Disabled schemes will be treated as if they are not |
| # supported by the implementation. |
| # |
| # The 'jdk.http.auth.tunneling.disabledSchemes' property lists the authentication |
| # schemes that will be disabled when tunneling HTTPS over a proxy, HTTP CONNECT. |
| # The 'jdk.http.auth.proxying.disabledSchemes' property lists the authentication |
| # schemes that will be disabled when proxying HTTP. |
| # |
| # In both cases the property is a comma-separated list of, case-insensitive, |
| # authentication scheme names, as defined by their relevant RFCs. An |
| # implementation may, but is not required to, support common schemes whose names |
| # include: 'Basic', 'Digest', 'NTLM', 'Kerberos', 'Negotiate'. A scheme that |
| # is not known, or not supported, by the implementation is ignored. |
| # |
| # Note: This property is currently used by the JDK Reference implementation. It |
| # is not guaranteed to be examined and used by other implementations. |
| # |
| #jdk.http.auth.proxying.disabledSchemes= |
| jdk.http.auth.tunneling.disabledSchemes=Basic |
| |
| # |
| # Allow restricted HTTP request headers |
| # |
| # By default, the following request headers are not allowed to be set by user code |
| # in HttpRequests: "connection", "content-length", "expect", "host" and "upgrade". |
| # The 'jdk.httpclient.allowRestrictedHeaders' property allows one or more of these |
| # headers to be specified as a comma separated list to override the default restriction. |
| # The names are case-insensitive and white-space is ignored (removed before processing |
| # the list). Note, this capability is mostly intended for testing and isn't expected |
| # to be used in real deployments. Protocol errors or other undefined behavior is likely |
| # to occur when using them. The property is not set by default. |
| # Note also, that there may be other headers that are restricted from being set |
| # depending on the context. This includes the "Authorization" header when the |
| # relevant HttpClient has an authenticator set. These restrictions cannot be |
| # overridden by this property. |
| # |
| # jdk.httpclient.allowRestrictedHeaders=host |
| # |
| # |
| # Transparent NTLM HTTP authentication mode on Windows. Transparent authentication |
| # can be used for the NTLM scheme, where the security credentials based on the |
| # currently logged in user's name and password can be obtained directly from the |
| # operating system, without prompting the user. This property has three possible |
| # values which regulate the behavior as shown below. Other unrecognized values |
| # are handled the same as 'disabled'. Note, that NTLM is not considered to be a |
| # strongly secure authentication scheme and care should be taken before enabling |
| # this mechanism. |
| # |
| # Transparent authentication never used. |
| #jdk.http.ntlm.transparentAuth=disabled |
| # |
| # Enabled for all hosts. |
| #jdk.http.ntlm.transparentAuth=allHosts |
| # |
| # Enabled for hosts that are trusted in Windows Internet settings |
| #jdk.http.ntlm.transparentAuth=trustedHosts |
| # |
| jdk.http.ntlm.transparentAuth=disabled |
| # |
| # Default directory where automatically bound Unix domain server |
| # sockets are stored. Sockets are automatically bound when bound |
| # with a null address. |
| # |
| # On Unix the search order to determine this directory is: |
| # |
| # 1. System property jdk.net.unixdomain.tmpdir |
| # |
| # 2. Networking property jdk.net.unixdomain.tmpdir specified |
| # in this file (effective default) |
| # |
| # 3. System property java.io.tmpdir |
| # |
| jdk.net.unixdomain.tmpdir=/tmp |