| /* |
| * Copyright (C) 2018 The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| package android.content; |
| |
| import android.annotation.NonNull; |
| import android.annotation.Nullable; |
| import android.app.AppOpsManager; |
| import android.os.Binder; |
| import android.os.Process; |
| import android.permission.IPermissionChecker; |
| import android.permission.PermissionCheckerManager; |
| import android.permission.PermissionCheckerManager.PermissionResult; |
| |
| /** |
| * This class provides permission check APIs that verify both the |
| * permission and the associated app op for this permission if |
| * such is defined. |
| * <p> |
| * In the new permission model permissions with protection level |
| * dangerous are runtime permissions. For apps targeting {@link android.os.Build.VERSION_CODES#M} |
| * and above the user may not grant such permissions or revoke |
| * them at any time. For apps targeting API lower than {@link android.os.Build.VERSION_CODES#M} |
| * these permissions are always granted as such apps do not expect |
| * permission revocations and would crash. Therefore, when the |
| * user disables a permission for a legacy app in the UI the |
| * platform disables the APIs guarded by this permission making |
| * them a no-op which is doing nothing or returning an empty |
| * result or default error. |
| * </p> |
| * <p> |
| * It is important that when you perform an operation on behalf of |
| * another app you use these APIs to check for permissions as the |
| * app may be a legacy app that does not participate in the new |
| * permission model for which the user had disabled the "permission" |
| * which is achieved by disallowing the corresponding app op. |
| * </p> |
| * <p> |
| * This class has two types of methods and you should be careful which |
| * type to call based on whether permission protected data is being |
| * passed to the app or you are just checking whether the app holds a |
| * permission. The reason is that a permission check requires checking |
| * the runtime permission and if it is granted checking the corresponding |
| * app op as for apps not supporting the runtime mode we never revoke |
| * permissions but disable app ops. Since there are two types of app op |
| * checks, one that does not leave a record an action was performed and |
| * another the does, one needs to call the preflight flavor of the checks |
| * named xxxForPreflight only if no private data is being delivered but |
| * a permission check is what is needed and the xxxForDataDelivery where |
| * the permission check is right before private data delivery. |
| * |
| * @hide |
| */ |
| public final class PermissionChecker { |
| /** |
| * The permission is granted. |
| * |
| * @hide |
| */ |
| public static final int PERMISSION_GRANTED = PermissionCheckerManager.PERMISSION_GRANTED; |
| |
| /** |
| * The permission is denied. Applicable only to runtime and app op permissions. |
| * |
| * <p>Returned when: |
| * <ul> |
| * <li>the runtime permission is granted, but the corresponding app op is denied |
| * for runtime permissions.</li> |
| * <li>the app ops is ignored for app op permissions.</li> |
| * </ul> |
| * |
| * @hide |
| */ |
| public static final int PERMISSION_SOFT_DENIED = |
| PermissionCheckerManager.PERMISSION_SOFT_DENIED; |
| |
| /** |
| * The permission is denied. |
| * |
| * <p>Returned when: |
| * <ul> |
| * <li>the permission is denied for non app op permissions.</li> |
| * <li>the app op is denied or app op is {@link AppOpsManager#MODE_DEFAULT} |
| * and permission is denied.</li> |
| * </ul> |
| * |
| * @hide |
| */ |
| public static final int PERMISSION_HARD_DENIED = |
| PermissionCheckerManager.PERMISSION_HARD_DENIED; |
| |
| /** Constant when the PID for which we check permissions is unknown. */ |
| public static final int PID_UNKNOWN = -1; |
| |
| private static volatile IPermissionChecker sService; |
| |
| private PermissionChecker() { |
| /* do nothing */ |
| } |
| |
| /** |
| * Checks whether a given package in a UID and PID has a given permission |
| * and whether the app op that corresponds to this permission is allowed. |
| * |
| * <strong>NOTE:</strong> Use this method only for permission checks at the |
| * point where you will deliver the permission protected data to clients. |
| * |
| * <p>For example, if an app registers a location listener it should have the location |
| * permission but no data is actually sent to the app at the moment of registration |
| * and you should use {@link #checkPermissionForPreflight(Context, String, int, int, String)} |
| * to determine if the app has or may have location permission (if app has only foreground |
| * location the grant state depends on the app's fg/gb state) and this check will not |
| * leave a trace that permission protected data was delivered. When you are about to |
| * deliver the location data to a registered listener you should use this method which |
| * will evaluate the permission access based on the current fg/bg state of the app and |
| * leave a record that the data was accessed. |
| * |
| * <p>For more details how to determine the {@code packageName}, {@code attributionTag}, and |
| * {@code message}, please check the description in |
| * {@link AppOpsManager#noteOp(String, int, String, String, String)} |
| * |
| * @param context Context for accessing resources. |
| * @param permission The permission to check. |
| * @param pid The process id for which to check. Use {@link #PID_UNKNOWN} if the PID |
| * is not known. |
| * @param uid The uid for which to check. |
| * @param packageName The package name for which to check. If null the |
| * the first package for the calling UID will be used. |
| * @param attributionTag attribution tag |
| * @return The permission check result which is either {@link #PERMISSION_GRANTED} |
| * or {@link #PERMISSION_SOFT_DENIED} or {@link #PERMISSION_HARD_DENIED}. |
| * @param message A message describing the reason the permission was checked |
| * @param startDataDelivery Whether this is the start of data delivery. |
| * |
| * @see #checkPermissionForPreflight(Context, String, int, int, String) |
| */ |
| @PermissionCheckerManager.PermissionResult |
| public static int checkPermissionForDataDelivery(@NonNull Context context, |
| @NonNull String permission, int pid, int uid, @Nullable String packageName, |
| @Nullable String attributionTag, @Nullable String message, boolean startDataDelivery) { |
| return checkPermissionForDataDelivery(context, permission, pid, new AttributionSource(uid, |
| packageName, attributionTag), message, startDataDelivery); |
| } |
| |
| /** |
| * Checks whether a given package in a UID and PID has a given permission |
| * and whether the app op that corresponds to this permission is allowed. |
| * |
| * <strong>NOTE:</strong> Use this method only for permission checks at the |
| * point where you will deliver the permission protected data to clients. |
| * |
| * <p>For example, if an app registers a location listener it should have the location |
| * permission but no data is actually sent to the app at the moment of registration |
| * and you should use {@link #checkPermissionForPreflight(Context, String, int, int, String)} |
| * to determine if the app has or may have location permission (if app has only foreground |
| * location the grant state depends on the app's fg/gb state) and this check will not |
| * leave a trace that permission protected data was delivered. When you are about to |
| * deliver the location data to a registered listener you should use this method which |
| * will evaluate the permission access based on the current fg/bg state of the app and |
| * leave a record that the data was accessed. |
| * |
| * <p>For more details how to determine the {@code packageName}, {@code attributionTag}, and |
| * {@code message}, please check the description in |
| * {@link AppOpsManager#noteOp(String, int, String, String, String)} |
| * |
| * @param context Context for accessing resources. |
| * @param permission The permission to check. |
| * @param pid The process id for which to check. Use {@link #PID_UNKNOWN} if the PID |
| * is not known. |
| * @param uid The uid for which to check. |
| * @param packageName The package name for which to check. If null the |
| * the first package for the calling UID will be used. |
| * @param attributionTag attribution tag |
| * @return The permission check result which is either {@link #PERMISSION_GRANTED} |
| * or {@link #PERMISSION_SOFT_DENIED} or {@link #PERMISSION_HARD_DENIED}. |
| * @param message A message describing the reason the permission was checked |
| * |
| * @see #checkPermissionForPreflight(Context, String, int, int, String) |
| */ |
| @PermissionResult |
| public static int checkPermissionForDataDelivery(@NonNull Context context, |
| @NonNull String permission, int pid, int uid, @Nullable String packageName, |
| @Nullable String attributionTag, @Nullable String message) { |
| return checkPermissionForDataDelivery(context, permission, pid, uid, |
| packageName, attributionTag, message, false /*startDataDelivery*/); |
| } |
| |
| /** |
| * Checks whether a given data access chain described by the given {@link AttributionSource} |
| * has a given permission and whether the app op that corresponds to this permission |
| * is allowed. Call this method if you are the datasource which would not blame you for |
| * access to the data since you are the data. |
| * |
| * <strong>NOTE:</strong> Use this method only for permission checks at the |
| * point where you will deliver the permission protected data to clients. |
| * |
| * <p>For example, if an app registers a location listener it should have the location |
| * permission but no data is actually sent to the app at the moment of registration |
| * and you should use {@link #checkPermissionForPreflight(Context, String, int, int, String)} |
| * to determine if the app has or may have location permission (if app has only foreground |
| * location the grant state depends on the app's fg/gb state) and this check will not |
| * leave a trace that permission protected data was delivered. When you are about to |
| * deliver the location data to a registered listener you should use this method which |
| * will evaluate the permission access based on the current fg/bg state of the app and |
| * leave a record that the data was accessed. |
| * |
| * @param context Context for accessing resources. |
| * @param permission The permission to check. |
| * @param pid The process id for which to check. Use {@link #PID_UNKNOWN} if the PID |
| * is not known. |
| * @param attributionSource the permission identity |
| * @return The permission check result which is either {@link #PERMISSION_GRANTED} |
| * or {@link #PERMISSION_SOFT_DENIED} or {@link #PERMISSION_HARD_DENIED}. |
| * @param message A message describing the reason the permission was checked |
| * |
| * @see #checkPermissionForPreflight(Context, String, AttributionSource) |
| */ |
| @PermissionResult |
| public static int checkPermissionForDataDeliveryFromDataSource(@NonNull Context context, |
| @NonNull String permission, int pid, @NonNull AttributionSource attributionSource, |
| @Nullable String message) { |
| return checkPermissionForDataDeliveryCommon(context, permission, attributionSource, |
| message, false /*startDataDelivery*/, /*fromDatasource*/ true); |
| } |
| |
| /** |
| * Checks whether a given data access chain described by the given {@link AttributionSource} |
| * has a given permission and whether the app op that corresponds to this permission |
| * is allowed. |
| * |
| * <strong>NOTE:</strong> Use this method only for permission checks at the |
| * point where you will deliver the permission protected data to clients. |
| * |
| * <p>For example, if an app registers a location listener it should have the location |
| * permission but no data is actually sent to the app at the moment of registration |
| * and you should use {@link #checkPermissionForPreflight(Context, String, AttributionSource)} |
| * to determine if the app has or may have location permission (if app has only foreground |
| * location the grant state depends on the app's fg/gb state) and this check will not |
| * leave a trace that permission protected data was delivered. When you are about to |
| * deliver the location data to a registered listener you should use this method which |
| * will evaluate the permission access based on the current fg/bg state of the app and |
| * leave a record that the data was accessed. |
| * |
| * @param context Context for accessing resources. |
| * @param permission The permission to check. |
| * @param pid The process id for which to check. Use {@link #PID_UNKNOWN} if the PID |
| * is not known. |
| * @param attributionSource the permission identity |
| * @param message A message describing the reason the permission was checked |
| * @return The permission check result which is either {@link #PERMISSION_GRANTED} |
| * or {@link #PERMISSION_SOFT_DENIED} or {@link #PERMISSION_HARD_DENIED}. |
| * |
| * @see #checkPermissionForPreflight(Context, String, AttributionSource) |
| */ |
| @PermissionResult |
| public static int checkPermissionForDataDelivery(@NonNull Context context, |
| @NonNull String permission, int pid, @NonNull AttributionSource attributionSource, |
| @Nullable String message) { |
| return checkPermissionForDataDelivery(context, permission, pid, attributionSource, |
| message, false /*startDataDelivery*/); |
| } |
| |
| /** |
| * Checks whether a given data access chain described by the given {@link AttributionSource} |
| * has a given permission and whether the app op that corresponds to this permission |
| * is allowed. |
| * |
| * <strong>NOTE:</strong> Use this method only for permission checks at the |
| * point where you will deliver the permission protected data to clients. |
| * |
| * <p>For example, if an app registers a data listener it should have the required |
| * permission but no data is actually sent to the app at the moment of registration |
| * and you should use {@link #checkPermissionForPreflight(Context, String, |
| * AttributionSource)} |
| * to determine if the app has or may have permission and this check will not |
| * leave a trace that permission protected data was delivered. When you are about to |
| * deliver the data to a registered listener you should use this method which |
| * will evaluate the permission access based on the current fg/bg state of the app and |
| * leave a record that the data was accessed. |
| * |
| * @param context Context for accessing resources. |
| * @param permission The permission to check. |
| * @param pid The process id for which to check. Use {@link #PID_UNKNOWN} if the PID |
| * is not known. |
| * @param attributionSource The identity for which to check the permission. |
| * @param message A message describing the reason the permission was checked |
| * @param startDataDelivery Whether this is the start of data delivery. |
| * @return The permission check result which is either {@link #PERMISSION_GRANTED} |
| * or {@link #PERMISSION_SOFT_DENIED} or {@link #PERMISSION_HARD_DENIED}. |
| * |
| * @see #checkPermissionForPreflight(Context, String, AttributionSource) |
| */ |
| @PermissionResult |
| public static int checkPermissionForDataDelivery(@NonNull Context context, |
| @NonNull String permission, int pid, @NonNull AttributionSource attributionSource, |
| @Nullable String message, boolean startDataDelivery) { |
| return checkPermissionForDataDeliveryCommon(context, permission, attributionSource, |
| message, startDataDelivery, /*fromDatasource*/ false); |
| } |
| |
| @SuppressWarnings("ConstantConditions") |
| private static int checkPermissionForDataDeliveryCommon(@NonNull Context context, |
| @NonNull String permission, @NonNull AttributionSource attributionSource, |
| @Nullable String message, boolean startDataDelivery, boolean fromDatasource) { |
| return context.getSystemService(PermissionCheckerManager.class).checkPermission(permission, |
| attributionSource.asState(), message, true /*forDataDelivery*/, startDataDelivery, |
| fromDatasource, AppOpsManager.OP_NONE); |
| } |
| |
| /** |
| * Checks whether a given data access chain described by the given {@link AttributionSource} |
| * has a given permission and whether the app op that corresponds to this permission |
| * is allowed. The app ops area also marked as started. This is useful for long running |
| * permissions like camera. |
| * |
| * <strong>NOTE:</strong> Use this method only for permission checks at the |
| * point where you will deliver the permission protected data to clients. |
| * |
| * <p>For example, if an app registers a data listener it should have the required |
| * permission but no data is actually sent to the app at the moment of registration |
| * and you should use {@link #checkPermissionForPreflight(Context, String, |
| * AttributionSource)} |
| * to determine if the app has or may have permission and this check will not |
| * leave a trace that permission protected data was delivered. When you are about to |
| * deliver the data to a registered listener you should use this method which |
| * will evaluate the permission access based on the current fg/bg state of the app and |
| * leave a record that the data was accessed. |
| * |
| * @param context Context for accessing resources. |
| * @param permission The permission to check. |
| * @param attributionSource The identity for which to check the permission. |
| * @param message A message describing the reason the permission was checked |
| * @return The permission check result which is either {@link #PERMISSION_GRANTED} |
| * or {@link #PERMISSION_SOFT_DENIED} or {@link #PERMISSION_HARD_DENIED}. |
| * |
| * @see #checkPermissionForPreflight(Context, String, AttributionSource) |
| */ |
| @PermissionResult |
| @SuppressWarnings("ConstantConditions") |
| public static int checkPermissionAndStartDataDelivery(@NonNull Context context, |
| @NonNull String permission, @NonNull AttributionSource attributionSource, |
| @Nullable String message) { |
| return context.getSystemService(PermissionCheckerManager.class).checkPermission( |
| permission, attributionSource.asState(), message, true /*forDataDelivery*/, |
| /*startDataDelivery*/ true, /*fromDatasource*/ false, AppOpsManager.OP_NONE); |
| } |
| |
| /** |
| * Checks whether a given data access chain described by the given {@link |
| * AttributionSource} has a given app op allowed and marks the op as started. |
| * |
| * <strong>NOTE:</strong> Use this method only for app op checks at the |
| * point where you will deliver the protected data to clients. |
| * |
| * <p>For example, if an app registers a data listener it should have the data |
| * op but no data is actually sent to the app at the moment of registration |
| * and you should use {@link #checkOpForPreflight(Context, String, AttributionSource, String)} |
| * to determine if the app has or may have op access and this check will not |
| * leave a trace that op protected data was delivered. When you are about to |
| * deliver the data to a registered listener you should use this method which |
| * will evaluate the op access based on the current fg/bg state of the app and |
| * leave a record that the data was accessed. |
| * |
| * @param context Context for accessing resources. |
| * @param opName THe op to start. |
| * @param attributionSource The identity for which to check the permission. |
| * @param message A message describing the reason the permission was checked |
| * @return The permission check result which is either {@link #PERMISSION_GRANTED} |
| * or {@link #PERMISSION_SOFT_DENIED} or {@link #PERMISSION_HARD_DENIED}. |
| * |
| * @see #finishDataDelivery(Context, String, AttributionSource) |
| */ |
| @PermissionResult |
| @SuppressWarnings("ConstantConditions") |
| public static int startOpForDataDelivery(@NonNull Context context, |
| @NonNull String opName, @NonNull AttributionSource attributionSource, |
| @Nullable String message) { |
| return context.getSystemService(PermissionCheckerManager.class).checkOp( |
| AppOpsManager.strOpToOp(opName), attributionSource.asState(), message, |
| true /*forDataDelivery*/, true /*startDataDelivery*/); |
| } |
| |
| /** |
| * Finishes an ongoing op for data access chain described by the given {@link |
| * AttributionSource}. |
| * |
| * @param context Context for accessing resources. |
| * @param op The op to finish. |
| * @param attributionSource The identity for which finish op. |
| * |
| * @see #startOpForDataDelivery(Context, String, AttributionSource, String) |
| * @see #checkPermissionAndStartDataDelivery(Context, String, AttributionSource, String) |
| */ |
| @SuppressWarnings("ConstantConditions") |
| public static void finishDataDelivery(@NonNull Context context, @NonNull String op, |
| @NonNull AttributionSource attributionSource) { |
| context.getSystemService(PermissionCheckerManager.class).finishDataDelivery( |
| AppOpsManager.strOpToOp(op), attributionSource.asState(), |
| /*fromDatasource*/ false); |
| } |
| |
| /** |
| * Finishes an ongoing op for data access chain described by the given {@link |
| * AttributionSource}. Call this method if you are the datasource which would |
| * not finish an op for your attribution source as it was not started. |
| * |
| * @param context Context for accessing resources. |
| * @param op The op to finish. |
| * @param attributionSource The identity for which finish op. |
| * |
| * @see #startOpForDataDelivery(Context, String, AttributionSource, String) |
| * @see #checkPermissionAndStartDataDelivery(Context, String, AttributionSource, String) |
| */ |
| @SuppressWarnings("ConstantConditions") |
| public static void finishDataDeliveryFromDatasource(@NonNull Context context, |
| @NonNull String op, @NonNull AttributionSource attributionSource) { |
| context.getSystemService(PermissionCheckerManager.class).finishDataDelivery( |
| AppOpsManager.strOpToOp(op), attributionSource.asState(), |
| /*fromDatasource*/ true); |
| } |
| |
| /** |
| * Checks whether a given data access chain described by the given {@link |
| * AttributionSource} has a given app op allowed. |
| * |
| * <strong>NOTE:</strong> Use this method only for op checks at the |
| * preflight point where you will not deliver the protected data |
| * to clients but schedule a data delivery, apps register listeners, |
| * etc. |
| * |
| * <p>For example, if an app registers a data listener it should have the op |
| * but no data is actually sent to the app at the moment of registration |
| * and you should use this method to determine if the app has or may have data |
| * access and this check will not leave a trace that protected data |
| * was delivered. When you are about to deliver the data to a registered |
| * listener you should use {@link #checkOpForDataDelivery(Context, String, |
| * AttributionSource, String)} which will evaluate the op access based |
| * on the current fg/bg state of the app and leave a record that the data was |
| * accessed. |
| * |
| * @param context Context for accessing resources. |
| * @param opName The op to check. |
| * @param attributionSource The identity for which to check the permission. |
| * @param message A message describing the reason the permission was checked |
| * @return The permission check result which is either {@link #PERMISSION_GRANTED} |
| * or {@link #PERMISSION_SOFT_DENIED} or {@link #PERMISSION_HARD_DENIED}. |
| * |
| * @see #checkOpForDataDelivery(Context, String, AttributionSource, String) |
| */ |
| @PermissionResult |
| @SuppressWarnings("ConstantConditions") |
| public static int checkOpForPreflight(@NonNull Context context, |
| @NonNull String opName, @NonNull AttributionSource attributionSource, |
| @Nullable String message) { |
| return context.getSystemService(PermissionCheckerManager.class).checkOp( |
| AppOpsManager.strOpToOp(opName), attributionSource.asState(), message, |
| false /*forDataDelivery*/, false /*startDataDelivery*/); |
| } |
| |
| /** |
| * Checks whether a given data access chain described by the given {@link AttributionSource} |
| * has an allowed app op. |
| * |
| * <strong>NOTE:</strong> Use this method only for op checks at the |
| * point where you will deliver the permission protected data to clients. |
| * |
| * <p>For example, if an app registers a data listener it should have the data |
| * permission but no data is actually sent to the app at the moment of registration |
| * and you should use {@link #checkOpForPreflight(Context, String, AttributionSource, String)} |
| * to determine if the app has or may have data access and this check will not |
| * leave a trace that op protected data was delivered. When you are about to |
| * deliver the data to a registered listener you should use this method which |
| * will evaluate the op access based on the current fg/bg state of the app and |
| * leave a record that the data was accessed. |
| * |
| * @param context Context for accessing resources. |
| * @param opName The op to check. |
| * @param attributionSource The identity for which to check the op. |
| * @return The permission check result which is either {@link #PERMISSION_GRANTED} |
| * or {@link #PERMISSION_SOFT_DENIED} or {@link #PERMISSION_HARD_DENIED}. |
| * @param message A message describing the reason the permission was checked |
| * |
| * @see #checkOpForPreflight(Context, String, AttributionSource, String) |
| */ |
| @PermissionResult |
| @SuppressWarnings("ConstantConditions") |
| public static int checkOpForDataDelivery(@NonNull Context context, |
| @NonNull String opName, @NonNull AttributionSource attributionSource, |
| @Nullable String message) { |
| return context.getSystemService(PermissionCheckerManager.class).checkOp( |
| AppOpsManager.strOpToOp(opName), attributionSource.asState(), message, |
| true /*forDataDelivery*/, false /*startDataDelivery*/); |
| } |
| |
| /** |
| * Checks whether a given package in a UID and PID has a given permission |
| * and whether the app op that corresponds to this permission is allowed. |
| * |
| * <strong>NOTE:</strong> Use this method only for permission checks at the |
| * preflight point where you will not deliver the permission protected data |
| * to clients but schedule permission data delivery, apps register listeners, |
| * etc. |
| * |
| * <p>For example, if an app registers a location listener it should have the location |
| * permission but no data is actually sent to the app at the moment of registration |
| * and you should use this method to determine if the app has or may have location |
| * permission (if app has only foreground location the grant state depends on the app's |
| * fg/gb state) and this check will not leave a trace that permission protected data |
| * was delivered. When you are about to deliver the location data to a registered |
| * listener you should use {@link #checkPermissionForDataDelivery(Context, String, |
| * int, int, String, String, String)} which will evaluate the permission access based |
| * on the currentfg/bg state of the app and leave a record that the data was accessed. |
| * |
| * @param context Context for accessing resources. |
| * @param permission The permission to check. |
| * @param pid The process id for which to check. |
| * @param uid The uid for which to check. |
| * @param packageName The package name for which to check. If null the |
| * the first package for the calling UID will be used. |
| * @return The permission check result which is either {@link #PERMISSION_GRANTED} |
| * or {@link #PERMISSION_SOFT_DENIED} or {@link #PERMISSION_HARD_DENIED}. |
| * |
| * @see #checkPermissionForDataDelivery(Context, String, int, int, String, String, String) |
| */ |
| @PermissionResult |
| public static int checkPermissionForPreflight(@NonNull Context context, |
| @NonNull String permission, int pid, int uid, @Nullable String packageName) { |
| return checkPermissionForPreflight(context, permission, new AttributionSource( |
| uid, packageName, null /*attributionTag*/)); |
| } |
| |
| /** |
| * Checks whether a given data access chain described by the given {@link AttributionSource} |
| * has a given permission and whether the app op that corresponds to this permission |
| * is allowed. |
| * |
| * <strong>NOTE:</strong> Use this method only for permission checks at the |
| * preflight point where you will not deliver the permission protected data |
| * to clients but schedule permission data delivery, apps register listeners, |
| * etc. |
| * |
| * <p>For example, if an app registers a data listener it should have the required |
| * permission but no data is actually sent to the app at the moment of registration |
| * and you should use this method to determine if the app has or may have the |
| * permission and this check will not leave a trace that permission protected data |
| * was delivered. When you are about to deliver the protected data to a registered |
| * listener you should use {@link #checkPermissionForDataDelivery(Context, String, |
| * int, AttributionSource, String, boolean)} which will evaluate the permission access based |
| * on the current fg/bg state of the app and leave a record that the data was accessed. |
| * |
| * @param context Context for accessing resources. |
| * @param permission The permission to check. |
| * @param attributionSource The identity for which to check the permission. |
| * @return The permission check result which is either {@link #PERMISSION_GRANTED} |
| * or {@link #PERMISSION_SOFT_DENIED} or {@link #PERMISSION_HARD_DENIED}. |
| * |
| * @see #checkPermissionForDataDelivery(Context, String, int, AttributionSource, |
| * String, boolean) |
| */ |
| @PermissionResult |
| @SuppressWarnings("ConstantConditions") |
| public static int checkPermissionForPreflight(@NonNull Context context, |
| @NonNull String permission, @NonNull AttributionSource attributionSource) { |
| return context.getSystemService(PermissionCheckerManager.class) |
| .checkPermission(permission, attributionSource.asState(), null /*message*/, |
| false /*forDataDelivery*/, /*startDataDelivery*/ false, /*fromDatasource*/ false, |
| AppOpsManager.OP_NONE); |
| } |
| |
| /** |
| * Checks whether your app has a given permission and whether the app op |
| * that corresponds to this permission is allowed. |
| * |
| * <strong>NOTE:</strong> Use this method only for permission checks at the |
| * point where you will deliver the permission protected data to clients. |
| * |
| * <p>For example, if an app registers a location listener it should have the location |
| * permission but no data is actually sent to the app at the moment of registration |
| * and you should use {@link #checkSelfPermissionForPreflight(Context, String)} |
| * to determine if the app has or may have location permission (if app has only foreground |
| * location the grant state depends on the app's fg/gb state) and this check will not |
| * leave a trace that permission protected data was delivered. When you are about to |
| * deliver the location data to a registered listener you should use this method |
| * which will evaluate the permission access based on the current fg/bg state of the |
| * app and leave a record that the data was accessed. |
| * |
| * <p>This API assumes the the {@link Binder#getCallingUid()} is the same as |
| * {@link Process#myUid()}. |
| * |
| * @param context Context for accessing resources. |
| * @param permission The permission to check. |
| * @return The permission check result which is either {@link #PERMISSION_GRANTED} |
| * or {@link #PERMISSION_SOFT_DENIED} or {@link #PERMISSION_HARD_DENIED}. |
| * @param message A message describing the reason the permission was checked |
| * |
| * @see #checkSelfPermissionForPreflight(Context, String) |
| */ |
| @PermissionResult |
| public static int checkSelfPermissionForDataDelivery(@NonNull Context context, |
| @NonNull String permission, @Nullable String message) { |
| return checkPermissionForDataDelivery(context, permission, Process.myPid(), |
| Process.myUid(), context.getPackageName(), context.getAttributionTag(), message, |
| /*startDataDelivery*/ false); |
| } |
| |
| /** |
| * Checks whether your app has a given permission and whether the app op |
| * that corresponds to this permission is allowed. |
| * |
| * <strong>NOTE:</strong> Use this method only for permission checks at the |
| * preflight point where you will not deliver the permission protected data |
| * to clients but schedule permission data delivery, apps register listeners, |
| * etc. |
| * |
| * <p>For example, if an app registers a location listener it should have the location |
| * permission but no data is actually sent to the app at the moment of registration |
| * and you should use this method to determine if the app has or may have location |
| * permission (if app has only foreground location the grant state depends on the |
| * app's fg/gb state) and this check will not leave a trace that permission protected |
| * data was delivered. When you are about to deliver the location data to a registered |
| * listener you should use this method which will evaluate the permission access based |
| * on the current fg/bg state of the app and leave a record that the data was accessed. |
| * |
| * <p>This API assumes the the {@link Binder#getCallingUid()} is the same as |
| * {@link Process#myUid()}. |
| * |
| * @param context Context for accessing resources. |
| * @param permission The permission to check. |
| * @return The permission check result which is either {@link #PERMISSION_GRANTED} |
| * or {@link #PERMISSION_SOFT_DENIED} or {@link #PERMISSION_HARD_DENIED}. |
| * |
| * @see #checkSelfPermissionForDataDelivery(Context, String, String) |
| */ |
| @PermissionResult |
| public static int checkSelfPermissionForPreflight(@NonNull Context context, |
| @NonNull String permission) { |
| return checkPermissionForPreflight(context, permission, Process.myPid(), |
| Process.myUid(), context.getPackageName()); |
| } |
| |
| /** |
| * Checks whether the IPC you are handling has a given permission and whether |
| * the app op that corresponds to this permission is allowed. |
| * |
| * <strong>NOTE:</strong> Use this method only for permission checks at the |
| * point where you will deliver the permission protected data to clients. |
| * |
| * <p>For example, if an app registers a location listener it should have the location |
| * permission but no data is actually sent to the app at the moment of registration |
| * and you should use {@link #checkCallingPermissionForPreflight(Context, String, String)} |
| * to determine if the app has or may have location permission (if app has only foreground |
| * location the grant state depends on the app's fg/gb state) and this check will not |
| * leave a trace that permission protected data was delivered. When you are about to |
| * deliver the location data to a registered listener you should use this method which |
| * will evaluate the permission access based on the current fg/bg state of the app and |
| * leave a record that the data was accessed. |
| * |
| * <p>For more details how to determine the {@code callingPackageName}, |
| * {@code callingAttributionTag}, and {@code message}, please check the description in |
| * {@link AppOpsManager#noteOp(String, int, String, String, String)} |
| * |
| * @param context Context for accessing resources. |
| * @param permission The permission to check. |
| * @param callingPackageName The package name making the IPC. If null the |
| * the first package for the calling UID will be used. |
| * @param callingAttributionTag attribution tag |
| * @return The permission check result which is either {@link #PERMISSION_GRANTED} |
| * or {@link #PERMISSION_SOFT_DENIED} or {@link #PERMISSION_HARD_DENIED}. |
| * @param message A message describing the reason the permission was checked |
| * |
| * @see #checkCallingPermissionForPreflight(Context, String, String) |
| */ |
| @PermissionResult |
| public static int checkCallingPermissionForDataDelivery(@NonNull Context context, |
| @NonNull String permission, @Nullable String callingPackageName, |
| @Nullable String callingAttributionTag, @Nullable String message) { |
| if (Binder.getCallingPid() == Process.myPid()) { |
| return PERMISSION_HARD_DENIED; |
| } |
| return checkPermissionForDataDelivery(context, permission, Binder.getCallingPid(), |
| Binder.getCallingUid(), callingPackageName, callingAttributionTag, message, |
| /*startDataDelivery*/ false); |
| } |
| |
| /** |
| * Checks whether the IPC you are handling has a given permission and whether |
| * the app op that corresponds to this permission is allowed. |
| * |
| * <strong>NOTE:</strong> Use this method only for permission checks at the |
| * preflight point where you will not deliver the permission protected data |
| * to clients but schedule permission data delivery, apps register listeners, |
| * etc. |
| * |
| * <p>For example, if an app registers a location listener it should have the location |
| * permission but no data is actually sent to the app at the moment of registration |
| * and you should use this method to determine if the app has or may have location |
| * permission (if app has only foreground location the grant state depends on the app's |
| * fg/gb state) and this check will not leave a trace that permission protected data |
| * was delivered. When you are about to deliver the location data to a registered |
| * listener you should use {@link #checkCallingOrSelfPermissionForDataDelivery(Context, |
| * String, String, String, String)} which will evaluate the permission access based on the |
| * current fg/bg stateof the app and leave a record that the data was accessed. |
| * |
| * @param context Context for accessing resources. |
| * @param permission The permission to check. |
| * @param packageName The package name making the IPC. If null the |
| * the first package for the calling UID will be used. |
| * @return The permission check result which is either {@link #PERMISSION_GRANTED} |
| * or {@link #PERMISSION_SOFT_DENIED} or {@link #PERMISSION_HARD_DENIED}. |
| * |
| * @see #checkCallingPermissionForDataDelivery(Context, String, String, String, String) |
| */ |
| @PermissionResult |
| public static int checkCallingPermissionForPreflight(@NonNull Context context, |
| @NonNull String permission, @Nullable String packageName) { |
| if (Binder.getCallingPid() == Process.myPid()) { |
| return PERMISSION_HARD_DENIED; |
| } |
| return checkPermissionForPreflight(context, permission, Binder.getCallingPid(), |
| Binder.getCallingUid(), packageName); |
| } |
| |
| /** |
| * Checks whether the IPC you are handling or your app has a given permission |
| * and whether the app op that corresponds to this permission is allowed. |
| * |
| * <strong>NOTE:</strong> Use this method only for permission checks at the |
| * point where you will deliver the permission protected data to clients. |
| * |
| * <p>For example, if an app registers a location listener it should have the location |
| * permission but no data is actually sent to the app at the moment of registration |
| * and you should use {@link #checkCallingOrSelfPermissionForPreflight(Context, String)} |
| * to determine if the app has or may have location permission (if app has only foreground |
| * location the grant state depends on the app's fg/gb state) and this check will not |
| * leave a trace that permission protected data was delivered. When you are about to |
| * deliver the location data to a registered listener you should use this method which |
| * will evaluate the permission access based on the current fg/bg state of the app and |
| * leave a record that the data was accessed. |
| * |
| * <p>For more details how to determine the {@code callingPackageName}, |
| * {@code callingAttributionTag}, and {@code message}, please check the description in |
| * {@link AppOpsManager#noteOp(String, int, String, String, String)} |
| * |
| * @param context Context for accessing resources. |
| * @param permission The permission to check. |
| * @return The permission check result which is either {@link #PERMISSION_GRANTED} |
| * or {@link #PERMISSION_SOFT_DENIED} or {@link #PERMISSION_HARD_DENIED}. |
| * @param callingPackageName package name tag of caller (if not self) |
| * @param callingAttributionTag attribution tag of caller (if not self) |
| * @param message A message describing the reason the permission was checked |
| * |
| * @see #checkCallingOrSelfPermissionForPreflight(Context, String) |
| */ |
| @PermissionResult |
| public static int checkCallingOrSelfPermissionForDataDelivery(@NonNull Context context, |
| @NonNull String permission, @Nullable String callingPackageName, |
| @Nullable String callingAttributionTag, @Nullable String message) { |
| callingPackageName = (Binder.getCallingPid() == Process.myPid()) |
| ? context.getPackageName() : callingPackageName; |
| callingAttributionTag = (Binder.getCallingPid() == Process.myPid()) |
| ? context.getAttributionTag() : callingAttributionTag; |
| return checkPermissionForDataDelivery(context, permission, Binder.getCallingPid(), |
| Binder.getCallingUid(), callingPackageName, callingAttributionTag, message, |
| /*startDataDelivery*/ false); |
| } |
| |
| /** |
| * Checks whether the IPC you are handling or your app has a given permission |
| * and whether the app op that corresponds to this permission is allowed. |
| * |
| * <strong>NOTE:</strong> Use this method only for permission checks at the |
| * preflight point where you will not deliver the permission protected data |
| * to clients but schedule permission data delivery, apps register listeners, |
| * etc. |
| * |
| * <p>For example, if an app registers a location listener it should have the location |
| * permission but no data is actually sent to the app at the moment of registration |
| * and you should use this method to determine if the app has or may have location |
| * permission (if app has only foreground location the grant state depends on the |
| * app's fg/gb state) and this check will not leave a trace that permission protected |
| * data was delivered. When you are about to deliver the location data to a registered |
| * listener you should use {@link #checkCallingOrSelfPermissionForDataDelivery(Context, |
| * String, String, String, String)} which will evaluate the permission access based on the |
| * current fg/bg state of the app and leave a record that the data was accessed. |
| * |
| * @param context Context for accessing resources. |
| * @param permission The permission to check. |
| * @return The permission check result which is either {@link #PERMISSION_GRANTED} |
| * or {@link #PERMISSION_SOFT_DENIED} or {@link #PERMISSION_HARD_DENIED}. |
| * |
| * @see #checkCallingOrSelfPermissionForDataDelivery(Context, String, String, String, String) |
| */ |
| @PermissionResult |
| public static int checkCallingOrSelfPermissionForPreflight(@NonNull Context context, |
| @NonNull String permission) { |
| String packageName = (Binder.getCallingPid() == Process.myPid()) |
| ? context.getPackageName() : null; |
| return checkPermissionForPreflight(context, permission, Binder.getCallingPid(), |
| Binder.getCallingUid(), packageName); |
| } |
| } |
