| ########################## Start of libnfc-nci.conf ########################### |
| ############################################################################### |
| # Application options |
| NFC_DEBUG_ENABLED=1 |
| ############################################################################### |
| # performance measurement |
| # Change this setting to control how often USERIAL log the performance (throughput) |
| # data on read/write/poll |
| # default is to log performance dara for every 100 read or write |
| #REPORT_PERFORMANCE_MEASURE=100 |
| ############################################################################### |
| # File used for NFA storage |
| NFA_STORAGE="/data/nfc" |
| ############################################################################### |
| ## Default poll duration (in ms) |
| ## The default is 500ms if not set |
| NFA_DM_DISC_DURATION_POLL=500 |
| |
| ############################################################################### |
| # Force UICC to only listen to the following technology(s). |
| # The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. |
| # Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | NFA_TECHNOLOGY_MASK_F |
| UICC_LISTEN_TECH_MASK=0x07 |
| |
| ############################################################################### |
| # When screen is turned off, specify the desired power state of the controller. |
| # 0: power-off-sleep state; DEFAULT |
| # 1: full-power state |
| # 2: screen-off card-emulation (CE4/CE3/CE1 modes are used) |
| SCREEN_OFF_POWER_STATE=1 |
| ############################################################################### |
| # Force tag polling for the following technology(s). |
| # The bits are defined as tNFA_TECHNOLOGY_MASK in nfa_api.h. |
| # Default is NFA_TECHNOLOGY_MASK_A | NFA_TECHNOLOGY_MASK_B | |
| # NFA_TECHNOLOGY_MASK_F | NFA_TECHNOLOGY_MASK_ISO15693 | |
| # NFA_TECHNOLOGY_MASK_B_PRIME | |
| # NFA_TECHNOLOGY_MASK_A_ACTIVE | NFA_TECHNOLOGY_MASK_F_ACTIVE. |
| # |
| # Notable bits: |
| # NFA_TECHNOLOGY_MASK_A 0x01 /* NFC Technology A */ |
| # NFA_TECHNOLOGY_MASK_B 0x02 /* NFC Technology B */ |
| # NFA_TECHNOLOGY_MASK_F 0x04 /* NFC Technology F */ |
| # NFA_TECHNOLOGY_MASK_ISO15693 0x08 /* Proprietary Technology */ |
| POLLING_TECH_MASK=0x0F |
| |
| ############################################################################### |
| PRESERVE_STORAGE=0x01 |
| ############################################################################### |
| # Override the stack default for NFA_EE_MAX_EE_SUPPORTED set in nfc_target.h. |
| # The value is set to 3 by default as it assumes we will discover 0xF2, |
| # 0xF3, and 0xF4. If a platform will exclude and SE, this value can be reduced |
| # so that the stack will not wait any longer than necessary. |
| |
| # Maximum EE supported number |
| # NXP PN547C2 0x02 |
| # NXP PN65T 0x03 |
| # NXP PN548C2 0x02 |
| # NXP PN66T 0x03 |
| NFA_MAX_EE_SUPPORTED=0x03 |
| ############################################################################## |
| # Deactivate notification wait time out in seconds used in ETSI Reader mode |
| # 0 - Infinite wait |
| NFA_DM_DISC_NTF_TIMEOUT=0 |
| |
| ############################################################################### |
| # AID_MATCHING constants |
| # AID_MATCHING_EXACT_ONLY 0x00 |
| # AID_MATCHING_EXACT_OR_PREFIX 0x01 |
| # AID_MATCHING_PREFIX_ONLY 0x02 |
| #AID_MATCHING_EXACT_OR_SUBSET_OR_PREFIX 0x03 |
| AID_MATCHING_MODE=0x03 |
| |
| ############################################################################### |
| # NCI_RESET_TYPE options |
| # Default 0x00, reset configurations everytime. |
| # 0x01, reset configurations only once every boot. |
| # 0x02, keep configurations. |
| NCI_RESET_TYPE=0x02 |
| |
| ################################################################################ |
| #Set bit to 1 , block list is enabled |
| #Set bit to 0, to disable block list |
| NFA_AID_BLOCK_ROUTE=0x00 |
| |
| ############################################################################### |
| #Set the OffHost AID supported power state: |
| OFFHOST_AID_ROUTE_PWR_STATE=0x3B |
| |
| ################################################################################ |
| # Maximum WTX requests entertained by MW |
| NXP_WM_MAX_WTX_COUNT=30 |
| ################################################################################ |
| #Set the default Felica T3T System Code : |
| #This settings will be used when application does not set this parameter |
| DEFAULT_SYS_CODE={FE:FE} |
| ######################################################################### |
| #Set NCI credit notification timeout value |
| NXP_NCI_CREDIT_NTF_TIMEOUT=2 |
| ############################################################################### |
| # Set presence check retry count value. Value Range: 0 to 5 |
| # This value indicates the number of time presence check is repeated in case of |
| # failure |
| PRESENCE_CHECK_RETRY_COUNT=0 |
| ######################################################################### |
| |
