| /****************************************************************************** |
| * |
| * Copyright(c) 2016 - 2017 Realtek Corporation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2 of the GNU General Public License as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| * more details. |
| * |
| ******************************************************************************/ |
| |
| #include "halmac_pcie_8822b.h" |
| #include "halmac_pwr_seq_8822b.h" |
| #include "../halmac_init_88xx.h" |
| #include "../halmac_common_88xx.h" |
| #include "../halmac_pcie_88xx.h" |
| #include "../halmac_88xx_cfg.h" |
| |
| #if HALMAC_8822B_SUPPORT |
| |
| /** |
| * halmac_mac_power_switch_8822b_pcie() - switch mac power |
| * @pHalmac_adapter : the adapter of halmac |
| * @halmac_power : power state |
| * Author : KaiYuan Chang |
| * Return : HALMAC_RET_STATUS |
| * More details of status code can be found in prototype document |
| */ |
| HALMAC_RET_STATUS |
| halmac_mac_power_switch_8822b_pcie( |
| IN PHALMAC_ADAPTER pHalmac_adapter, |
| IN HALMAC_MAC_POWER halmac_power |
| ) |
| { |
| u8 interface_mask; |
| u8 value8; |
| u8 rpwm; |
| VOID *pDriver_adapter = NULL; |
| PHALMAC_API pHalmac_api; |
| HALMAC_RET_STATUS status; |
| |
| if (halmac_adapter_validate(pHalmac_adapter) != HALMAC_RET_SUCCESS) |
| return HALMAC_RET_ADAPTER_INVALID; |
| |
| if (halmac_api_validate(pHalmac_adapter) != HALMAC_RET_SUCCESS) |
| return HALMAC_RET_API_INVALID; |
| |
| pDriver_adapter = pHalmac_adapter->pDriver_adapter; |
| pHalmac_api = (PHALMAC_API)pHalmac_adapter->pHalmac_api; |
| |
| PLATFORM_MSG_PRINT(pDriver_adapter, HALMAC_MSG_PWR, HALMAC_DBG_TRACE, "[TRACE]halmac_mac_power_switch_88xx_pcie==========>\n", halmac_power); |
| PLATFORM_MSG_PRINT(pDriver_adapter, HALMAC_MSG_PWR, HALMAC_DBG_TRACE, "[TRACE]halmac_power = %x\n", halmac_power); |
| PLATFORM_MSG_PRINT(pDriver_adapter, HALMAC_MSG_PWR, HALMAC_DBG_TRACE, "[TRACE]8822B pwr seq ver = %s\n", HALMAC_8822B_PWR_SEQ_VER); |
| |
| interface_mask = HALMAC_PWR_INTF_PCI_MSK; |
| |
| pHalmac_adapter->rpwm_record = HALMAC_REG_READ_8(pHalmac_adapter, REG_PCIE_HRPWM1_V1); |
| |
| /* Check FW still exist or not */ |
| if (HALMAC_REG_READ_16(pHalmac_adapter, REG_MCUFW_CTRL) == 0xC078) { |
| /* Leave 32K */ |
| rpwm = (u8)((pHalmac_adapter->rpwm_record ^ BIT(7)) & 0x80); |
| HALMAC_REG_WRITE_8(pHalmac_adapter, REG_PCIE_HRPWM1_V1, rpwm); |
| } |
| |
| value8 = HALMAC_REG_READ_8(pHalmac_adapter, REG_CR); |
| if (value8 == 0xEA) |
| pHalmac_adapter->halmac_state.mac_power = HALMAC_MAC_POWER_OFF; |
| else |
| pHalmac_adapter->halmac_state.mac_power = HALMAC_MAC_POWER_ON; |
| |
| /* Check if power switch is needed */ |
| if (halmac_power == HALMAC_MAC_POWER_ON && pHalmac_adapter->halmac_state.mac_power == HALMAC_MAC_POWER_ON) { |
| PLATFORM_MSG_PRINT(pDriver_adapter, HALMAC_MSG_PWR, HALMAC_DBG_WARN, "[WARN]halmac_mac_power_switch power state unchange!\n"); |
| return HALMAC_RET_PWR_UNCHANGE; |
| } |
| |
| if (halmac_power == HALMAC_MAC_POWER_OFF) { |
| status = halmac_trxdma_check_idle_88xx(pHalmac_adapter); |
| if (status != HALMAC_RET_SUCCESS) |
| return status; |
| if (halmac_pwr_seq_parser_88xx(pHalmac_adapter, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_TSMC_MSK, |
| interface_mask, halmac_8822b_card_disable_flow) != HALMAC_RET_SUCCESS) { |
| PLATFORM_MSG_PRINT(pDriver_adapter, HALMAC_MSG_PWR, HALMAC_DBG_ERR, "[ERR]Handle power off cmd error\n"); |
| return HALMAC_RET_POWER_OFF_FAIL; |
| } |
| |
| pHalmac_adapter->halmac_state.mac_power = HALMAC_MAC_POWER_OFF; |
| pHalmac_adapter->halmac_state.ps_state = HALMAC_PS_STATE_UNDEFINE; |
| pHalmac_adapter->halmac_state.dlfw_state = HALMAC_DLFW_NONE; |
| halmac_init_adapter_dynamic_para_88xx(pHalmac_adapter); |
| } else { |
| if (halmac_pwr_seq_parser_88xx(pHalmac_adapter, HALMAC_PWR_CUT_ALL_MSK, HALMAC_PWR_FAB_TSMC_MSK, |
| interface_mask, halmac_8822b_card_enable_flow) != HALMAC_RET_SUCCESS) { |
| PLATFORM_MSG_PRINT(pDriver_adapter, HALMAC_MSG_PWR, HALMAC_DBG_ERR, "[ERR]Handle power on cmd error\n"); |
| return HALMAC_RET_POWER_ON_FAIL; |
| } |
| |
| pHalmac_adapter->halmac_state.mac_power = HALMAC_MAC_POWER_ON; |
| pHalmac_adapter->halmac_state.ps_state = HALMAC_PS_STATE_ACT; |
| } |
| |
| PLATFORM_MSG_PRINT(pDriver_adapter, HALMAC_MSG_PWR, HALMAC_DBG_TRACE, "[TRACE]halmac_mac_power_switch_88xx_pcie <==========\n"); |
| |
| return HALMAC_RET_SUCCESS; |
| } |
| |
| /** |
| * halmac_pcie_switch_8822b() - pcie gen1/gen2 switch |
| * @pHalmac_adapter : the adapter of halmac |
| * @pcie_cfg : gen1/gen2 selection |
| * Author : KaiYuan Chang |
| * Return : HALMAC_RET_STATUS |
| * More details of status code can be found in prototype document |
| */ |
| HALMAC_RET_STATUS |
| halmac_pcie_switch_8822b_pcie( |
| IN PHALMAC_ADAPTER pHalmac_adapter, |
| IN HALMAC_PCIE_CFG pcie_cfg |
| ) |
| { |
| VOID *pDriver_adapter = NULL; |
| PHALMAC_API pHalmac_api; |
| u8 current_link_speed = 0; |
| u32 count = 0; |
| |
| if (halmac_adapter_validate(pHalmac_adapter) != HALMAC_RET_SUCCESS) |
| return HALMAC_RET_ADAPTER_INVALID; |
| |
| if (halmac_api_validate(pHalmac_adapter) != HALMAC_RET_SUCCESS) |
| return HALMAC_RET_API_INVALID; |
| |
| pDriver_adapter = pHalmac_adapter->pDriver_adapter; |
| pHalmac_api = (PHALMAC_API)pHalmac_adapter->pHalmac_api; |
| |
| PLATFORM_MSG_PRINT(pDriver_adapter, HALMAC_MSG_PWR, HALMAC_DBG_TRACE, "[TRACE]halmac_pcie_switch_8822b ==========>\n"); |
| |
| /** |
| * Link Control 2 Register[3:0] Target Link Speed |
| * Defined encodings are: |
| * 0001b Target Link 2.5 GT/s |
| * 0010b Target Link 5.0 GT/s |
| * 0100b Target Link 8.0 GT/s |
| */ |
| |
| if (pcie_cfg == HALMAC_PCIE_GEN1) { |
| /* cfg 0xA0[3:0]=4'b0001 */ |
| halmac_dbi_write8_88xx(pHalmac_adapter, LINK_CTRL2_REG_OFFSET, (halmac_dbi_read8_88xx(pHalmac_adapter, LINK_CTRL2_REG_OFFSET) & 0xF0) | BIT(0)); |
| |
| /* cfg 0x80C[17]=1 //PCIe DesignWave */ |
| halmac_dbi_write32_88xx(pHalmac_adapter, GEN2_CTRL_OFFSET, halmac_dbi_read32_88xx(pHalmac_adapter, GEN2_CTRL_OFFSET) | BIT(17)); |
| |
| /* check link speed if GEN1 */ |
| /* cfg 0x82[3:0]=4'b0001 */ |
| current_link_speed = halmac_dbi_read8_88xx(pHalmac_adapter, LINK_STATUS_REG_OFFSET) & 0x0F; |
| count = 2000; |
| |
| while ((current_link_speed != HALMAC_PCIE_GEN1_SPEED_88XX) && (count != 0)) { |
| PLATFORM_RTL_DELAY_US(pDriver_adapter, 50); |
| current_link_speed = halmac_dbi_read8_88xx(pHalmac_adapter, LINK_STATUS_REG_OFFSET) & 0x0F; |
| count--; |
| } |
| |
| if (current_link_speed != HALMAC_PCIE_GEN1_SPEED_88XX) { |
| PLATFORM_MSG_PRINT(pDriver_adapter, HALMAC_MSG_PWR, HALMAC_DBG_ERR, "[ERR]Speed change to GEN1 fail !\n"); |
| return HALMAC_RET_FAIL; |
| } |
| |
| } else if (pcie_cfg == HALMAC_PCIE_GEN2) { |
| /* cfg 0xA0[3:0]=4'b0010 */ |
| halmac_dbi_write8_88xx(pHalmac_adapter, LINK_CTRL2_REG_OFFSET, (halmac_dbi_read8_88xx(pHalmac_adapter, LINK_CTRL2_REG_OFFSET) & 0xF0) | BIT(1)); |
| |
| /* cfg 0x80C[17]=1 //PCIe DesignWave */ |
| halmac_dbi_write32_88xx(pHalmac_adapter, GEN2_CTRL_OFFSET, halmac_dbi_read32_88xx(pHalmac_adapter, GEN2_CTRL_OFFSET) | BIT(17)); |
| |
| /* check link speed if GEN2 */ |
| /* cfg 0x82[3:0]=4'b0010 */ |
| current_link_speed = halmac_dbi_read8_88xx(pHalmac_adapter, LINK_STATUS_REG_OFFSET) & 0x0F; |
| count = 2000; |
| |
| while ((current_link_speed != HALMAC_PCIE_GEN2_SPEED_88XX) && (count != 0)) { |
| PLATFORM_RTL_DELAY_US(pDriver_adapter, 50); |
| current_link_speed = halmac_dbi_read8_88xx(pHalmac_adapter, LINK_STATUS_REG_OFFSET) & 0x0F; |
| count--; |
| } |
| |
| if (current_link_speed != HALMAC_PCIE_GEN2_SPEED_88XX) { |
| PLATFORM_MSG_PRINT(pDriver_adapter, HALMAC_MSG_PWR, HALMAC_DBG_ERR, "[ERR]Speed change to GEN1 fail !\n"); |
| return HALMAC_RET_FAIL; |
| } |
| |
| } else { |
| PLATFORM_MSG_PRINT(pDriver_adapter, HALMAC_MSG_PWR, HALMAC_DBG_ERR, "[ERR]Error Speed !\n"); |
| return HALMAC_RET_FAIL; |
| } |
| |
| PLATFORM_MSG_PRINT(pDriver_adapter, HALMAC_MSG_PWR, HALMAC_DBG_TRACE, "[TRACE]halmac_pcie_switch_8822b <==========\n"); |
| |
| return HALMAC_RET_SUCCESS; |
| } |
| |
| /** |
| * halmac_phy_cfg_8822b_pcie() - phy config |
| * @pHalmac_adapter : the adapter of halmac |
| * Author : KaiYuan Chang |
| * Return : HALMAC_RET_STATUS |
| * More details of status code can be found in prototype document |
| */ |
| HALMAC_RET_STATUS |
| halmac_phy_cfg_8822b_pcie( |
| IN PHALMAC_ADAPTER pHalmac_adapter, |
| IN HALMAC_INTF_PHY_PLATFORM platform |
| ) |
| { |
| VOID *pDriver_adapter = NULL; |
| HALMAC_RET_STATUS status = HALMAC_RET_SUCCESS; |
| PHALMAC_API pHalmac_api; |
| |
| if (halmac_adapter_validate(pHalmac_adapter) != HALMAC_RET_SUCCESS) |
| return HALMAC_RET_ADAPTER_INVALID; |
| |
| if (halmac_api_validate(pHalmac_adapter) != HALMAC_RET_SUCCESS) |
| return HALMAC_RET_API_INVALID; |
| |
| pDriver_adapter = pHalmac_adapter->pDriver_adapter; |
| pHalmac_api = (PHALMAC_API)pHalmac_adapter->pHalmac_api; |
| |
| PLATFORM_MSG_PRINT(pDriver_adapter, HALMAC_MSG_PWR, HALMAC_DBG_TRACE, "[TRACE]halmac_phy_cfg ==========>\n"); |
| |
| status = halmac_parse_intf_phy_88xx(pHalmac_adapter, HALMAC_RTL8822B_PCIE_PHY_GEN1, platform, HAL_INTF_PHY_PCIE_GEN1); |
| |
| if (status != HALMAC_RET_SUCCESS) |
| return status; |
| |
| status = halmac_parse_intf_phy_88xx(pHalmac_adapter, HALMAC_RTL8822B_PCIE_PHY_GEN2, platform, HAL_INTF_PHY_PCIE_GEN2); |
| |
| if (status != HALMAC_RET_SUCCESS) |
| return status; |
| |
| PLATFORM_MSG_PRINT(pDriver_adapter, HALMAC_MSG_PWR, HALMAC_DBG_TRACE, "[TRACE]halmac_phy_cfg <==========\n"); |
| |
| return HALMAC_RET_SUCCESS; |
| } |
| |
| /** |
| * halmac_interface_integration_tuning_8822b_pcie() - pcie interface fine tuning |
| * @pHalmac_adapter : the adapter of halmac |
| * Author : Rick Liu |
| * Return : HALMAC_RET_STATUS |
| * More details of status code can be found in prototype document |
| */ |
| HALMAC_RET_STATUS |
| halmac_interface_integration_tuning_8822b_pcie( |
| IN PHALMAC_ADAPTER pHalmac_adapter |
| ) |
| { |
| return HALMAC_RET_SUCCESS; |
| } |
| |
| #endif /* HALMAC_8822B_SUPPORT*/ |